# and Engineering Graphics

Size: px
Start display at page:

Transcription

1 SOLIDWORKS 2018 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices.

4 iv SOLIDWORKS 2018 and Engineering Graphics Sketching Plane It is an XY CRT, but an XYZ world 2-7 Creating Rough Sketches 2-9 Step 2: Creating a Rough Sketch 2-10 Graphics Cursors 2-10 Geometric Relation Symbols 2-12 Step 3: Apply/Modify Relations and Dimensions 2-13 Viewing Functions Zoom and Pan 2-15 Delete an Existing Geometry of the Sketch 2-16 Modifying the Dimensions of the Sketch 2-17 Step 4: Completing the Base Solid Feature 2-18 Isometric View 2-19 Rotation of the 3-D Model Rotate View 2-19 Rotation and Panning Arrow keys 2-21 Dynamic Viewing Quick Keys D Rotation 2-24 Viewing Tools Heads-up View Toolbar 2-24 View Orientation 2-25 Display Style 2-26 Orthographic vs. Perspective 2-26 Customizing the Heads-up View Toolbar 2-26 Step 5-1: Adding an Extruded Boss Feature 2-27 Step 5-2: Adding an Extruded Cut Feature 2-31 Step 5-3: Adding another Cut Feature 2-33 Save the Model 2-35 Questions 2-36 Exercises 2-37 Chapter 3 Constructive Solid Geometry Concepts Introduction 3-3 Binary Tree 3-4 The Locator Design 3-5 Modeling Strategy CSG Binary Tree 3-6 Starting SOLIDWORKS and Activating the Command Manager 3-7 GRID and SNAP Intervals Setup 3-9 Base Feature 3-10 Repositioning Dimensions 3-12 Completing the Base Solid Feature 3-13 Creating the Next Solid Feature 3-14 Creating an Extruded Cut Feature 3-17 Creating a Hole with the Hole Wizard 3-20 Creating a Rectangular Extruded Cut Feature 3-23 Using the View Selector 3-25 Questions 3-27 Exercises 3-28

6 vi SOLIDWORKS 2018 and Engineering Graphics Creating a 2D Sketch 5-15 Renaming the Part Features 5-17 Adjusting the Width of the Base Feature 5-18 Adding a Cut Feature 5-19 Creating a Rectangular Extruded Cut Feature 5-22 History-Based Part Modifications 5-23 A Design Change 5-24 Feature Manager Design Tree Views 5-26 Questions 5-28 Exercises 5-29 Chapter 6 Geometric Construction Tools Introduction 6-3 The Gasket Design 6-3 Modeling Strategy 6-4 Starting SOLIDWORKS 6-5 Creating a 2D Sketch 6-6 Editing the Sketch by Dragging the Entities 6-8 Adding Additional Relations 6-10 Using the Trim and Extend Commands 6-11 Adding Dimensions with the Fully Define Sketch Tool 6-14 Fully Defined Geometry 6-16 Creating Fillets and Completing the Sketch 6-17 Profile Sketch 6-18 Redefining the Sketch and Profile using Contour Selection 6-19 Create an OFFSET Extruded Cut Feature 6-23 Questions 6-27 Exercises 6-28 Chapter 7 Orthographic Projections and Multiview Constructions Introduction 7-3 Basic Principles of Projection 7-4 Orthographic Projection 7-4 Multiview Orthographic Projection 7-5 First-Angle Projection 7-6 Rotation of the Horizontal and Profile Planes 7-7 The 3D Adjuster Model and 1 st angle projection 7-8 General Procedure: 1 St Angle Orthographic Projection 7-9 Example 2: 1 St Angle Orthographic Projection 7-10 Chapter 7-1 St Angle Orthographic Sketching Exercise Chapter 7-1 St Angle Orthographic Sketching Exercise Chapter 7-1 St Angle Orthographic Sketching Exercise Chapter 7-1 St Angle Orthographic Sketching Exercise

7 Table of Contents vii Chapter 7-1 St Angle Orthographic Sketching Exercise Chapter 7-1 St Angle Orthographic Sketching Exercise Third-Angle Projection 7-23 Rotation of the Horizontal and Profile Planes 7-24 The 3D Adjuster Model and 3 rd angle projection 7-25 The Glass Box and the Six Principal Views 7-26 General Procedure: 3 rd Angle Orthographic Projection 7-28 Example 2: 3 rd Angle Orthographic Projection 7-29 Example 3: 3 rd Angle Orthographic Projection 7-30 Chapter 7-3 rd Angle Orthographic Sketching Exercise Chapter 7-3 rd Angle Orthographic Sketching Exercise Chapter 7-3 rd Angle Orthographic Sketching Exercise Chapter 7-3 rd Angle Orthographic Sketching Exercise Chapter 7-3 rd Angle Orthographic Sketching Exercise Chapter 7-3 rd Angle Orthographic Sketching Exercise Alphabet of Lines 7-43 Precedence of Lines 7-45 The U-Bracket Design 7-46 Starting SOLIDWORKS 7-46 Applying the BORN Technique 7-47 Creating the 2D Sketch of the Base Feature 7-48 Creating the First Extrude Feature 7-55 The Implied Parent/Child Relationships 7-55 Creating the Second Solid Feature 7-56 Creating the First Extruded Cut Feature 7-59 Creating the Second Extruded Cut Feature 7-60 Examining the Parent/Child Relationships 7-62 Modify a Parent Dimension 7-63 A Design Change 7-64 Feature Suppression 7-65 A Different Approach to the CENTER_DRILL Feature 7-66 Suppress the Rect_Cut Feature 7-67 Creating a Circular Extruded Cut Feature 7-68 A Flexible Design Approach 7-70 Drawings from Parts and Associative Functionality 7-71 Drawing Mode 7-72 Setting Document Properties 7-74 Setting Sheet Properties using the Pre-Defined Sheet Formats 7-75 Creating Three Standard Views 7-76 Repositioning Views 7-76 Adding a New Sheet 7-78 Adding a Base View 7-79 Adding an Isometric View using the View Palette 7-82 Adjusting the View Scale 7-83 Questions 7-85 Exercises 7-86

8 viii SOLIDWORKS 2018 and Engineering Graphics Chapter 8 Dimensioning and Notes Introduction 8-3 Dimensioning Standards and Basic Terminology 8-4 Selection and Placement of Dimensions and Notes 8-5 Machined Holes 8-12 Baseline and Chain Dimensioning 8-15 Dimensioning and Tolerance Accumulation 8-16 (1) Tolerance Accumulation - Baseline Dimensioning 8-17 (2) Tolerance Accumulation - Chain Dimensioning 8-18 (3) Avoid Tolerance Accumulation Feature Functionality Manufacturing 8-19 Dimensioning Tools in SOLIDWORKS 8-20 The U-Bracket Design 8-20 Starting SOLIDWORKS 8-21 Displaying Feature Dimensions 8-22 Repositioning, Appearance, and Hiding of Feature Dimensions 8-23 Adding Additional Dimensions Reference Dimensions 8-25 Tangent Edge Display 8-27 Adding Center Marks, Center Lines, and Sketch Objects 8-27 Edit Sheet vs. Edit Sheet Format 8-32 Modify the Title Block 8-32 Property Links 8-35 Associative Functionality Modifying Feature Dimensions 8-39 Saving the Drawing File 8-42 Saving a Drawing Template 8-42 Questions 8-45 Exercises 8-46 Chapter 9 Tolerancing and Fits Precision and Tolerance 9-2 Methods of Specifying Tolerances English System 9-3 Nomenclature 9-4 Example Fits between Mating parts 9-6 Selective Assembly 9-7 Basic Hole and Basic Shaft Systems 9-7 American National Standard Limits and Fits Inches 9-8 Example 9.2 Basic Hole System 9-13 Example 9.3 Basic Hole System 9-14 Example 9.4 Basic Shaft System 9-15 Example 9.5 Basic Shaft System 9-16 Tolerancing Metric System 9-17 Metric Tolerances and Fits Designation 9-18 Preferred ISO Metric Fits 9-19

9 Table of Contents ix Example 9.6 Metric Hole Basis System 9-20 Example 9.7 Shaft Basis System 9-21 Updating the U-Bracket Drawing 9-22 Determining the Tolerances Required 9-23 Questions 9-25 Exercises 9-26 Chapter 10 Pictorials and Sketching Engineering Drawings, Pictorials and Sketching 10-2 Isometric Sketching 10-7 Chapter 10 - Isometric Sketching Exercise Chapter 10 - Isometric Sketching Exercise Chapter 10 - Isometric Sketching Exercise Chapter 10 - Isometric Sketching Exercise Chapter 10 - Isometric Sketching Exercise Chapter 10 - Isometric Sketching Exercise Chapter 10 - Isometric Sketching Exercise Chapter 10 - Isometric Sketching Exercise Chapter 10 - Isometric Sketching Exercise Chapter 10 - Isometric Sketching Exercise Oblique Sketching Chapter 10 - Oblique Sketching Exercise Chapter 10 - Oblique Sketching Exercise Chapter 10 - Oblique Sketching Exercise Chapter 10 - Oblique Sketching Exercise Chapter 10 - Oblique Sketching Exercise Chapter 10 - Oblique Sketching Exercise Perspective Sketching One-Point Perspective Two-Point Perspective Chapter 10 - Perspective Sketching Exercise Chapter 10 - Perspective Sketching Exercise Chapter 10 - Perspective Sketching Exercise Chapter 10 - Perspective Sketching Exercise Chapter 10 - Perspective Sketching Exercise Chapter 10 - Perspective Sketching Exercise Questions Exercises Chapter 11 Section Views & Symmetrical Features in Designs Introduction 11-3 General Rules of Section Views 11-5

10 x SOLIDWORKS 2018 and Engineering Graphics Section Drawing Types 11-6 Full Section 11-6 Half Section 11-6 Offset Section 11-7 Broken-Out Section 11-7 Aligned Section 11-8 Half Views 11-8 Thin Sections 11-8 Revolved Section 11-9 Removed Section 11-9 Conventional Breaks Ribs and Webs in Sections Parts Not Sectioned Section Views in SOLIDWORKS A Revolved Design: PULLEY Modeling Strategy - A Revolved Design Starting SOLIDWORKS Creating the Base Feature Creating the Revolved Feature Mirroring Features Creating an Extruded Cut Feature using Construction Geometry Circular Pattern Drawing Mode Defining a New Border and Title Block Creating a New Drawing Template Creating Views Retrieve Dimensions Model Items Command Save the Drawing File Associative Functionality A Design Change Adding Centerlines to the Pattern Feature Completing the Drawing Questions Exercises Chapter 12 Auxiliary Views and Reference Geometry Introduction 12-3 Normal View of an Inclined Surface 12-4 Construction Method I Folding Line Method 12-6 Construction Method II Reference Plane Method 12-8 Partial Views Reference Geometry in SOLIDWORKS Auxiliary Views in 2D Drawings The Rod-Guide Design Modeling Strategy Starting SOLIDWORKS 12-13

12 xii SOLIDWORKS 2018 and Engineering Graphics Schematic Representation 14-8 Simplified Representation 14-9 Thread Specification English Units Unified Thread Series Thread Fits Thread Specification Metric Thread Notes Examples Specifying Fasteners Commonly Used Fasteners Drawing Standard Bolts Bolt and Screw Clearances Fasteners using SOLIDWORKS Design Library ANSI Inch - Machine Screw ANSI Metric - Machine Screw Questions Chapter 15 Working Drawings General Engineering Design Process 15-3 Working Drawings 15-4 Detail Drawings 15-4 Assembly Drawings 15-5 Bill of Materials (BOM) and Parts List 15-5 Drawing Sizes 15-6 Drawing Sheet Borders and Revisions Block 15-6 Title Blocks 15-7 Working Drawings with SOLIDWORKS 15-8 Assembly Modeling Methodology 15-8 The Shaft Support Assembly 15-9 Parts 15-9 Creating the Collar with the Chamfer Command 15-9 Creating the Bearing and Base-Plate Creating the Cap-Screw Starting SOLIDWORKS Document Properties Inserting the First Component Inserting the Second Component Degrees of Freedom Assembly Mates Apply the First Assembly Mate Apply a Second Mate Constrained Move Apply a Third Mate Inserting the Third Component Applying Concentric and Coincident Mates 15-24

13 Table of Contents xiii Assemble the Cap-Screws using SmartMates Exploded View of the Assembly Save the Assembly Model Editing the Components Setup a Drawing of the Assembly Model Creating a Bill of Materials Editing the Bill of Materials Completing the Assembly Drawing Exporting the Bill of Materials Questions Exercises Chapter 16 CSWA Exam Preparation Tips about Taking the Certified SOLIDWORKS Associate Examination 16-3 Introduction 16-4 The Part Problem 16-5 Strategy for Aligning the Part to the Default Axis System 16-6 Creating the Base Feature 16-6 Creating a New View Orientation 16-9 Create Reference Planes and a Reference Axis Selecting the Material and Viewing the Mass Properties The Assembly Problem Creating the Parts Creating the Assembly Creating a Reference Coordinate System View the Mass Properties Questions Exercises Appendix A. Running and Sliding Fits American National Standard B. Preferred Metric Fits ISO standard C. UNIFIED NATIONAL THREAD FORM D. METRIC THREAD FORM E. FASTENERS (INCH SERIES) F. METRIC FASTENERS G. BOLT AND SCREW CLEARANCE HOLES H. REFERENCES Index

### SOLIDWORKS 2015 and Engineering Graphics

SOLIDWORKS 2015 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

### Parametric Modeling. with. Autodesk Inventor Randy H. Shih. Oregon Institute of Technology SDC

Parametric Modeling with Autodesk Inventor 2009 Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. iii Table of

### Principles and Practice

Principles and Practice An Integrated Approach to Engineering Graphics and AutoCAD 2016 Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

### An Introduction to Autodesk Inventor 2011 and AutoCAD Randy H. Shih SDC PUBLICATIONS. Schroff Development Corporation

An Introduction to Autodesk Inventor 2011 and AutoCAD 2011 Randy H. Shih SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation An Introduction to Autodesk Inventor 2011 and AutoCAD 2011

### Principles and Practice:

Principles and Practice: An Integrated Approach to Engineering Graphics and AutoCAD 2014 Randy H. Shih Multimedia Disc SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Video presentations

### Autodesk Inventor 2016

Parametric Modeling with Autodesk Inventor 2016 Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to learn

### Tools for Design. with VEX Robot Kit: Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS

Tools for Design with VEX Robot Kit: AutoCAD 2011 and Autodesk Inventor 2011 2D Drawing 3D Modeling Hand Sketching Randy H. Shih Oregon Institute of Technology INSIDE: SUPPLEMENTAL FILES ON CD SDC PUBLICATIONS

### Parametric Modeling with

Parametric Modeling with UGS NX 6 Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. Parametric Modeling with

### Tools for Design. Using AutoCAD 2016 and Autodesk Inventor 2016 SDC. Hand Sketching, 2D Drawing and 3D Modeling. Randy H. Shih

Tools for Design Using AutoCAD 2016 and Autodesk Inventor 2016 Hand Sketching, 2D Drawing and 3D Modeling Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered

### Parametric Modeling with Creo Parametric 2.0

Parametric Modeling with Creo Parametric 2.0 An Introduction to Creo Parametric 2.0 Randy H. Shih SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com

### Learning. Autodesk Inventor 2019 SDC. Modeling, Assembly and Analysis. Randy H. Shih. Better Textbooks. Lower Prices.

Learning Autodesk Inventor 2019 Modeling, Assembly and Analysis Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

### First Level 2D Fundamentals

AutoCAD 2016 Tutorial First Level 2D Fundamentals Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to

### AutoCAD 2014 Tutorial - First Level: 2D Fundamentals

AutoCAD 2014 Tutorial - First Level: 2D Fundamentals Randy H. Shih Multimedia Disc SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Video presentations

### SOLIDWORKS 2018 Basic Tools

SOLIDWORKS 2018 Basic Tools Getting Started with Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

### SOLIDWORKS 2017 Basic Tools

SOLIDWORKS 2017 Basic Tools Getting Started with Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

### SolidWorks 2013 Part I - Basic Tools

SolidWorks 2013 Part I - Basic Tools Parts, Assemblies and Drawings Paul Tran CSWE, CSWI Supplemental Files SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com

### ENGINEERING GRAPHICS ESSENTIALS

ENGINEERING GRAPHICS ESSENTIALS with AutoCAD 2012 Instruction Introduction to AutoCAD Engineering Graphics Principles Hand Sketching Text and Independent Learning CD Independent Learning CD: A Comprehensive

### SolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI

SolidWorks 2015 Part I - Basic Tools Includes CSWA Preparation Material Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered

### SolidWorks 2014 Part I - Basic Tools

SolidWorks 2014 Part I - Basic Tools Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit

AutoCAD LT 2010 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. AutoCAD LT 2010 Tutorial iii Table

### Creo Parametric 4.0 Basic Design

Creo Parametric 4.0 Basic Design Contents Table of Contents Introduction...1 Objective of This Textbook...1 Textbook Outline...2 Textbook Conventions...3 Exercise Files...3 System Configuration...4 Notes

### Technical Drawing 101 with AutoCAD 2018

Technical Drawing 101 with AutoCAD 2018 A Multidisciplinary Guide to Drafting Theory and Practice with Video Instruction Douglas Smith Antonio Ramirez Ashleigh Fuller SDC PUBLICATIONS Better Textbooks.

### Beginner s Guide to SolidWorks Level I

Beginner s Guide to SolidWorks 2014 - Level I Parts, Assemblies, Drawings, PhotoView 360 and Simulation Xpress Videos Now includes SolidWorks training videos Alejandro Reyes MSME, CSWP, CSWI Multimedia

### SOLIDWORKS 2018 Intermediate Skills

SOLIDWORKS 2018 Intermediate Skills Expanding on Solids, Surfaces, Multibodies, Configurations, Drawings, Sheet Metal and Assemblies Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices.

### Beginner s Guide to SolidWorks Level I

Beginner s Guide to SolidWorks 2013 - Level I Parts, Assemblies, Drawings, Simulation Xpress Alejandro Reyes MSME, CSWP, CSWI SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices.

### Engineering Technology

Engineering Technology Introduction to Parametric Modelling Engineering Technology 1 See Saw Exercise Part 1 Base Commands used New Part This lesson includes Sketching, Extruded Boss/Base, Hole Wizard,

### Drawing and Detailing with SolidWorks 2014

r n fo io n at io c at tifi ar er ep c pr WT es D R u d Pcl In C S W e th W E N Drawing and Detailing with SolidWorks 2014 Referencing the ASME Y14 Engineering Drawing and Related Documentation Practices

### SolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI

SolidWorks 2015 Part I - Basic Tools Includes CSWA Preparation Material Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered

### Tutorial Guide to AutoCAD 2015

Tutorial Guide to AutoCAD 2015 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

### Tutorial Guide to AutoCAD 2014

Tutorial Guide to AutoCAD 2014 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following websites

### Official Guide to Certified SolidWorks Associate Exams: CSWA, CSDA, CSWSA-FEA

Official Guide to Certified SolidWorks Associate Exams: CSWA, CSDA, CSWSA-FEA SolidWorks 2012-2015 An authorized CSWA preparation exam guide with additional information on the CSDA and CSWSA-FEA exams

### SOLIDWORKS 2016 Basic Tools

SOLIDWORKS 2016 Basic Tools Getting Started with Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

### Tutorial Guide to AutoCAD 2013

Tutorial Guide to AutoCAD 2013 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S Schroff Development Corporation For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com

### Engineering & Computer Graphics Workbook Using SolidWorks 2014

Engineering & Computer Graphics Workbook Using SolidWorks 2014 Ronald E. Barr Thomas J. Krueger Davor Juricic SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

### SOLIDWORKS Essentials

SOLIDWORKS Essentials Length: 5 days Prerequisite: Mechanical design experience and experience with the Windows operating system. Description: SOLIDWORKS Essentials teaches you how to use SOLIDWORKS mechanical

### Engineering & Computer Graphics Workbook Using SOLIDWORKS

Engineering & Computer Graphics Workbook Using SOLIDWORKS 2017 Ronald E. Barr Thomas J. Krueger Davor Juricic SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

### Principles and Practice

Principles and Practice An Integrated Approach to Engineering Graphics and AutoCAD 2017 Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

### Inventor 2016 Essentials Plus

Autodesk NEW Features a chapter on sheet metal design Inventor 2016 Essentials Plus Daniel T. Banach & Travis Jones SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF

### Teach Yourself UG NX Step-by-Step

Teach Yourself UG NX Step-by-Step By Hui Zhang Ph.D., P.Eng. www.geocities.com/zhanghui1998 Table of Contents Chapter 1 Introduction... 1 1.1 UG NX User Interface... 1 1.2 Solid Modeling Fundamentals...

### Toothbrush Holder. A drawing of the sheet metal part will also be created.

Prerequisite Knowledge Previous knowledge of the following commands is required to complete this lesson; Sketch (Line, Centerline, Circle, Add Relations, Smart Dimension,), Extrude Boss/Base, and Edit

### Beginner s Guide to SolidWorks Alejandro Reyes, MSME Certified SolidWorks Professional and Instructor SDC PUBLICATIONS

Beginner s Guide to SolidWorks 2008 Alejandro Reyes, MSME Certified SolidWorks Professional and Instructor SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com Part Modeling

### Creo Parametric 2.0: Introduction to Solid Modeling. Creo Parametric 2.0: Introduction to Solid Modeling

Creo Parametric 2.0: Introduction to Solid Modeling 1 2 Part 1 Class Files... xiii Chapter 1 Introduction to Creo Parametric... 1-1 1.1 Solid Modeling... 1-4 1.2 Creo Parametric Fundamentals... 1-6 Feature-Based...

### Certified SOLIDWORKS Professional Advanced Preparation Materials

Includes Preparation for Five Advanced Certification Exams Certified SOLIDWORKS Professional Advanced Preparation Materials Sheet Metal, Weldments, Surfacing, Mold Tools and Drawing Tools SOLIDWORKS 2016

### Introduction to Autodesk Inventor for F1 in Schools (Australian Version)

Introduction to Autodesk Inventor for F1 in Schools (Australian Version) F1 in Schools race car In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s Digital

### SOLIDWORKS 2018 Intermediate Skills

SOLIDWORKS 2018 Intermediate Skills Expanding on Solids, Surfaces, Multibodies, Configurations, Drawings, Sheet Metal and Assemblies Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices.

### AEROPLANE. Create a New Folder in your chosen location called Aeroplane. The four parts that make up the project will be saved here.

AEROPLANE Prerequisite Knowledge Previous knowledge of the following commands is required to complete this lesson. Sketching (Line, Rectangle, Arc, Add Relations, Dimensioning), Extrude, Assemblies and

### SDC. SolidWorks Tutorial 2001Plus. A Competency Project Based Approach Utilizing 3D Solid Modeling. David C. Planchard & Marie P.

2001Plus A Competency Project Based Approach Utilizing 3D Solid Modeling David C. Planchard & Marie P. Planchard SDC PUBLICATIONS www.schroff.com www.schroff-europe.com Project 2 Below are the desired

### Spokane Public Schools Course: Drafting and Design Technology

Spokane Public Schools Drafting and Design Technology Course: Drafting and Design Technology Total Framework Hours up to: 180 hours CIP Code: 140102 Exploratory Preparatory Date Last Modified: 4/2/2015

ENGINEERING & COMPUTER GRAPHICS WORKBOOK Using SolidWorks 2008 Ronald E. Barr Thomas J. Krueger Theodore A. Aanstoos Davor Juricic SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better

### A Concise Introduction to Engineering Graphics

A Concise Introduction to Engineering Graphics Fourth Edition Including Worksheet Series A Timothy J. Sexton, Professor Department of Industrial Technology Ohio University BONUS Book on CD: TECHNICAL GRAPHICS

### Introduction to Creo Parametric 2.0

Introduction to Creo Parametric 2.0 Overview Course Code Course Length TRN-3902-T 5 Days In this course, you will learn core modeling skills and quickly become proficient with Creo Parametric 2.0. Topics

### Below are the desired outcomes and usage competencies based on the completion of Project 4.

Engineering Design with SolidWorks Project 4 Below are the desired outcomes and usage competencies based on the completion of Project 4. Project Desired Outcomes: An understanding of the customer s requirements

### AutoCAD Tutorial First Level. 2D Fundamentals. Randy H. Shih SDC. Better Textbooks. Lower Prices.

AutoCAD 2018 Tutorial First Level 2D Fundamentals Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to

### TRAINING COURSE PROSPECTUS

SOLIDWORKS Essentials Duration: Prerequisites: Description: The topics covered in this course are: 4 Days Mechanical design experience; experience with the Windows operating system SOLIDWORKS Essentials

### Introducing SolidWorks

Introducing SolidWorks SAAST Robotics 2008 SolidWorks Software Visually-based 3-D Mechanical design software Engineers and Designers use it to: Quickly sketch out ideas Experiment with features, dimensions

### Principles and Practice

Principles and Practice An Integrated Approach to Engineering Graphics and AutoCAD 2011 Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation

ENGINEERING & COMPUTER GRAPHICS WORKBOOK Using SolidWorks 2005 Ronald E. Barr Thomas J. Krueger Theodore A. Aanstoos Davor Juricic SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com

### Essentials of SOLIDWORKS 2015 (4+ Days) * Ve-I Bonus! * File Management + SimulationXpress

Essentials of SOLIDWORKS 2015 (4+ Days) * Ve-I Bonus! * File Management + SimulationXpress Overview What is SOLIDWORKS? Interface Tour View Manipulation Provides some background info on the SOLIDWORKS

### SolidWorks 95 User s Guide

SolidWorks 95 User s Guide Disclaimer: The following User Guide was extracted from SolidWorks 95 Help files and was not originally distributed in this format. All content 1995, SolidWorks Corporation Contents

### CATIA V5 Workbook Release V5-6R2013

CATIA V5 Workbook Release V5-6R2013 Richard Cozzens SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to learn more

### Drawing and Detailing

Drawing and Detailing with SolidWorks 2007 By David C. Planchard and Marie P. Planchard Referencing the ASME Y14 Engineering Drawing and Related Documentation Practices SDC PUBLICATIONS Schroff Development

### Table of Contents. Dedication Preface. Chapter 1: Introduction to CATIA V5-6R2015. Chapter 2: Drawing Sketches in the Sketcher Workbench-I.

Table of Contents Dedication Preface iii xvii Chapter 1: Introduction to CATIA V5-6R2015 Introduction to CATIA V5-6R2015 1-2 CATIA V5 Workbenches 1-2 System Requirements 1-4 Getting Started with CATIA

### Modeling Basic Mechanical Components #1 Tie-Wrap Clip

Modeling Basic Mechanical Components #1 Tie-Wrap Clip This tutorial is about modeling simple and basic mechanical components with 3D Mechanical CAD programs, specifically one called Alibre Xpress, a freely

### with Creo Parametric 4.0

Parametric Modeling with Creo Parametric 4.0 An Introduction to Creo Parametric 4.0 NEW Contains a new chapter on 3D Printing Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com

### Product Modelling in Solid Works

Product Modelling in Solid Works In the following exercise you will use solid works to construct the computer mouse shown opposite. In this exercise you will use a number of advanced features to achieve

### Autodesk Inventor Module 17 Angles

Inventor Self-paced ecourse Autodesk Inventor Module 17 Angles Learning Outcomes When you have completed this module, you will be able to: 1 Describe drawing inclined lines, aligned and angular dimensions,

MECH 130 CAD LAB 5 SPRING 2017 due Friday, April 21, 2016 at 4:30 PM All of LAB 5 s hardcopies will be working drawing layouts. Do not print out from the part file. We will be using the ME130DRAW drawing

### Digital Camera Exercise

Commands Used New Part This lesson includes Sketching, Extruded Boss/Base, Extruded Cut, Fillet, Chamfer and Text. Click File, New on the standard toolbar. Select Part from the New SolidWorks Document

### Starting a 3D Modeling Part File

1 How to Create a 3D Model and Corresponding 2D Drawing with Dimensions, GDT (Geometric Dimensioning and Tolerance) Symbols and Title Block in SolidWorks 2013-2014 By Edward Locke This tutorial will introduce

### Computer Aided Drawing: An Overview

Computer Aided Drawing: An Overview Dr. H. Hirani Department of Mechanical Engineering INDIAN INSTITUTE OF TECHNOLOGY BOMBAY Powai, Mumbai-76 hirani@me.iitb.ac.in Drawing: Machine/ Engineering/ Technical

### ME Week 2 Project 2 Flange Manifold Part

1 Project 2 - Flange Manifold Part 1.1 Instructions This project focuses on additional sketching methods and sketching commands. Revolve and Work features are also introduced. The part being modeled is

### Engineering Working Drawings Basics

Engineering Working Drawings Basics Engineering graphics is an effective way of communicating technical ideas and it is an essential tool in engineering design where most of the design process is graphically

### Revit Structure 2014 Basics

Revit Structure 2014 Basics Framing and Documentation Elise Moss Authorized Author SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit

### Autodesk Inventor. In Engineering Design & Drafting. By Edward Locke

Autodesk Inventor In Engineering Design & Drafting By Edward Locke Engineering Design Drafting Essentials Working Drawings: Orthographic Projection Views (multi-view, auxiliary view, details and sections)

### Lesson 6 2D Sketch Panel Tools

Lesson 6 2D Sketch Panel Tools Inventor s Sketch Tool Bar contains tools for creating the basic geometry to create features and parts. On the surface, the Geometry tools look fairly standard: line, circle,

### Lesson 4 Holes and Rounds

Lesson 4 Holes and Rounds 111 Figure 4.1 Breaker OBJECTIVES Sketch arcs in sections Create a straight hole through a part Complete a Sketched hole Understand the Hole Tool Use Info to extract information

### COURSE SYLLABUS. Course Prefix Number:

COURSE SYLLABUS COURSE IDENTIFICATION Course Prefix Number: ETEC121 Course Title: Engineering Graphics I Division: Applied Science Division Program: Industrial Engineering Technology Credit Hours: 3 Revision

### Chapter 2. Drawing Sketches for Solid Models. Learning Objectives

Chapter 2 Drawing Sketches for Solid Models Learning Objectives After completing this chapter, you will be able to: Start a new template file to draw sketches. Set up the sketching environment. Use various

### Engineering Design. with SolidWorks A Step-by-Step Project Based Approach Utilizing 3D Solid Modeling

INSIDE: MultiMedia CD An audio/visual presentation of the tutorial projects Engineering Design with SolidWorks 2010 A Step-by-Step Project Based Approach Utilizing 3D Solid Modeling Introductory Level

### Engineering & Computer Graphics Workbook Using SolidWorks 2014

Engineering & Computer Graphics Workbook Using SolidWorks 2014 Ronald E. Barr Thomas J. Krueger Davor Juricic SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

### SolidWorks Training. Introductory course for staff and students from the School of Physics and Astronomy

SolidWorks Training Introductory course for staff and students from the School of Physics and Astronomy i) Introductory presentation SolidWorks Training ii) The SolidWorks GUI The SolidWorks Graphical

### Contents. Foreword. Using this Guide

Foreword xv Preface xvii Scope Using this Guide xix xix 1 Specifying technical products 1 1.1 What is meant by technical product specification? 1 1.2 Design brief 1 1.3 Function 1 1.4 Specifications 2

### Foreword. If you have any questions about these tutorials, drop your mail to

Foreword The main objective of these tutorials is to give you a kick start using Solidworks. The approach to write this tutorial is based on what is the most important knowledge you should know and what

### Engineering Design with SolidWorks A Step-by-Step Project Based Approach Utilizing 3D Solid Modeling. David C. Planchard & Marie P.

Engineering Design with SolidWorks 2003 A Step-by-Step Project Based Approach Utilizing 3D Solid Modeling David C. Planchard & Marie P. Planchard SDC PUBLICATIONS www.schroff.com www.schroff-europe.com

### Chair. Bottom Rail. on the Command Manager. on the Weldments toolbar.

Chapter 2 Chair Bottom Rail A. Weldments Toolbar. Step 1. Click File Menu > New, click Part and OK. Step 2. Right click Sketch on the Command Manager toolbar and select Weldments, Fig. 1. Step 3. Click

### PLTW IED MID TERM EXAM REVIEW Part A Multiple Choice

2014-15 PLTW IED MID TERM EXAM REVIEW Part A Multiple Choice Directions: Select the letter of the response which best completes the item or answers the question. Then record your answer on the answer sheet

### SolidWorks 2005 Tutorial. and MultiMedia CD. A Step-by-step Project Based Approach Utilizing 3D Solid Modeling

INSIDE: MultiMedia CD An audio/visual presentation of the tutorial projects SolidWorks 2005 Tutorial and MultiMedia CD A Step-by-step Project Based Approach Utilizing 3D Solid Modeling David C. Planchard

### ADA Curriculum for Pre-Engineering Students Correlation Guide

ADA Curriculum for Pre-Engineering Students Correlation Guide Madsen/Autodesk Inventor 7: Basics Through Advanced Note: The concepts presented in the ADA Curriculum are covered in the text as they pertain

### Required Materials For complete material(s) information, refer to

Butler Community College Science, Technology, Engineering, and Math Division Brett Trimpe Revised Spring 2016 Implemented Fall 2016 COURSE OUTLINE AutoCAD Basics Course Description EN 107. AutoCAD Basics.

### Module 1G: Creating a Circle-Based Cylindrical Sheet-metal Lateral Piece with an Overlaying Lateral Edge Seam And Dove-Tail Seams on the Top Edge

Inventor (10) Module 1G: 1G- 1 Module 1G: Creating a Circle-Based Cylindrical Sheet-metal Lateral Piece with an Overlaying Lateral Edge Seam And Dove-Tail Seams on the Top Edge In Module 1A, we have explored

SolidWorks Basics SolidWorks Navigation Command Bar Feature Tree Model Window Simple Box Select the Front plane Create a new sketch Create a Center Rectangle from the origin Smart Dimension the length

### Introduction to Circular Pattern Flower Pot

Prerequisite Knowledge Previous knowledge of the sketching commands Line, Circle, Add Relations, Smart Dimension is required to complete this lesson. Previous examples of Revolved Boss/Base, Cut Extrude,

### Quick Start for Autodesk Inventor

Quick Start for Autodesk Inventor Autodesk Inventor Professional is a 3D mechanical design tool with powerful solid modeling capabilities and an intuitive interface. In this lesson, you use a typical workflow

### Required Materials: Textbook: Grabowski, R. (2004). Using AutoCAD 2004: Basics. Clifton Park, N.Y: Delmar Learning.

Butler Community College Business, Technology, and Workforce Development COURSE OUTLINE AutoCAD Basics Mel Whiteside Spring 2004 Course Description: EN107. AutoCAD Basics. 3 hours credit. This course will

### Introduction to Sheet Metal Features SolidWorks 2009

SolidWorks 2009 Table of Contents Introduction to Sheet Metal Features Base Flange Method Magazine File.. 3 Envelopment & Development of Surfaces.. 14 Development of Transition Pieces.. 23 Conversion to

### for Solidworks TRAINING GUIDE LESSON-9-CAD

for Solidworks TRAINING GUIDE LESSON-9-CAD Mastercam for SolidWorks Training Guide Objectives You will create the geometry for SolidWorks-Lesson-9 using SolidWorks 3D CAD software. You will be working

The premium provider of learning products and solutions www.cadartifex.com EVALUATION CHAPTER 2 Drawing Sketches with SOLIDWORKS In this chapter: Invoking the Part Modeling Environment Invoking the Sketching