Auto-CAD Complete DFTG 1091
|
|
- Louise Campbell
- 6 years ago
- Views:
Transcription
1 HOUSTON COMMUNITY COLLEGE SOUTHWEST Auto-CAD Complete DFTG 1091 Date and Time of class: Class CRN: Instructor s Name: School Site: Phone number:
2 HOUSTON COMMUNITY COLLEGE SOUTHWEST COURSE SYLLABUS Auto-CAD Complete DFTG 1091 Topics address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. COURSE OBJECTIVE This program is designed to enable participants to implement their professional skills in graphics, drafting and design. Participants will learn to use a CAD system to create, edit, and print a two and three dimensional drawing. GOALS This introduction to basic computer-aided drafting will teach students the following skills: Using the AutoCAD application Drawings using tools in AutoCAD Editing and plotting using AutoCAD Understanding of dimensions in AutoCAD LEARNING OUTCOMES Students will demonstrate mastery of these objectives by successfully completing all handson, in-class labs that are specific to each unit goal. Upon completion of the course, students will be able to: Create drawings using AutoCAD Edit and plot using AutoCAD Create dimensions linear, aligned, rotated, baseline, etc. Edit dimensions Create Plotting drawings PREREQUISITE Familiarity with the computer REQUIRED MATERIALS AutoCAD 2005 A Problem- Solving Approach Sham Tickoo COURSE REQUIREMENTS AND EXPECTATIONS This is a 36-hour, instructor-guided course. Student will complete hands-on, in-class assignments. Page 2 of 5 Rev: Nov. 2, 2006
3 ATTENDANCE Students are expected to attend all classes. REQUIREMENTS FOR COURSE COMPLETION CERTIFICATE To receive a Certificate of Completion and Continuing Education Units, students must meet the following requirements: Attend at least 80% of scheduled class time Complete the course lab, demonstrating 80% mastery of course concepts or equivalent skills demonstrated to instructor. OPPORTUNITIES FOR STUDENT-FACULTY INTERACTION Students are encouraged to ask questions and request clarification or guidance as needed during class. A question and answer period is always provided. OPPORTUNITIES FOR CAREER EXPLORATION Topics relevant to future employment and career exploration opportunities will be presented to the students, including certification and degree prospects. OPPORTUNITIES FOR SUPPLEMENTAL INSTRUCTION Students are informed of instructional aids and resources, including books, other publications, and web sites relevant to the course. SPEAKER FORUM At the discretion of the instructor, speakers may be invited to address the class on pertinent topics. CELL PHONES AND PAGERS Cell phones and pagers can be disruptive during class. Please turn these devices off or set to mute while in the classroom or student lab. WITHDRAWAL AND REFUND POLICY Please refer to your schedule for withdrawal and refund policy. DISABILITY SERVICES Any student with a documented disability (e.g. physical, learning, psychiatric, vision, hearing, etc.) who needs to arrange reasonable accommodations must contact the Disability Services Office at the respective college at the beginning of each semester. Faculty are authorized to provide only the accommodations requested by the Disability Support Services Office. The Southwest College Disability Services Office phone number is Page 3 of 5 Rev: Nov. 2, 2006
4 AUTOCAD CONTENT SHEET Introductions to AutoCAD Starting AutoCAD AutoCAD Screen Components Drawing Area Command Window Status Bar Status Bar Tray Options Invoking Commands in AutoCAD AutoCAD Dialog Boxes Starting a New Drawing Open a Drawing Start form Scratch Use a Template Use a Wizard Saving your work Save Drawing as Dialog Box Automatic Timed Save Creation of Backup Files Changing Automatic Timed Saved and Backup Files Into AutoCAD Format Closing a Drawing Opening an Existing Drawing Multiple Document Environment (MDE) Quitting AutoCAD Understanding The Concept of Sheet Sets Creating a Sheet Set Adding a Subset to the Sheet Set Adding Sheets to the Sheet Set or a Subset Archiving a Sheet Set Resaving all the Sheets in a Sheet Set AutoCAD s Help Additional Help Resources Getting Started with AutoCAD Drawing Lines in AutoCAD Coordinate Systems Absolute Coordinate System Relative Coordinate System Direct Distance Entry Drawing Arcs Drawing Sketches Drawing Rectangles Drawing Ellipses Drawing Elliptical Arcs Drawing Regular Polygons Drawing Donuts Working with Drawing Aids Working with Object Snaps Running Object Snap Mode Using Auto Tracking Function and Control Keys Editing Sketched Objects Moving the Sketched Objects Copying the Sketched Objects Copying the Object Using the Base Point Pasting the Contents from the Clipboard Offsetting the Sketched Objects Rotating the Sketched Objects Scaling the Sketched Objects Filleting the Sketches Chamfering the Sketches Trimming the Sketched Objects Extended the Sketched Objects Stretching the Sketched Objects Lengthening the Sketched Objects Arraying the Sketched Objects Rectangular Array Polar Array Mirroring the Sketched Objects Breaking the Sketched Objects Stretching Objects with Grips (Stretch Mode) Moving Objects with Grips (Move Mode) Rotating Objects with Grips (Rotate Mode) Scaling Objects with Grips (Scale Mode) Mirroring Objects with Grips (Mirror Mode) Controlling the Drawing Display & Creating Text Creating Views Placing Views in a Sheet of a Sheet Set Aerial View Creating Text Writing Single Line Text Entering Special Characters Creating Multiline Text Editing Text Editing Text Using DDEDIT Command Editing Text Using PROPERTIES Palette Modifying the Scale of the Text Modifying the Justification of the Text Insert Table in the Drawing Creating a New Table Style Setting a Table Style Current Modifying a Table Style Substituting Fonts Creating Text Styles Determining Text Height Checking Spelling Text Quality and Text Fill Finding and Replacing Text Creating Title Sheet Table in a Sheet Set Basic Dimensioning Creating Linear Dimensions Creating Aligned Dimensions Creating Rotated Dimensions Page 4 of 5 Rev: Nov. 2, 2006
5 Creating Continued Dimensions Creating Diameter Dimensions Creating Radius Dimensions Generating Center Marks and Centerlines Creating Ordinate Dimensions Creating True Associative Dimensions Converting a Dimension into True Associative Dimension Removing the Dimension Associatively (DIMDISASSOCIATE Command) Drawing Leaders Using Leader with the DIM Command Geometric Dimensioning and Tolerancing Geometric Characteristics and Symbols Adding Geometric Tolerance Editing Dimensions Editing Dimensions Using Editing Tools Editing The Dimensions by Stretching Editing Dimensions by Trimming and Extending Editing the Dimensions Editing Dimension Text Updating Dimensions Editing Dimensions with Grips Dimension Styles & System Variables Using Styles and Variables to Control Dimensions Creating and Restoring Dimensions Styles New Dimensions Style Dialog Box Controlling Dimension Text Format Fitting Dimension Text and Arrowheads Formatting Primary Dimension Units Formatting Alternate Dimension Units Formatting the Tolerances Other Dimensioning Variables Dimension Style Families Using Dimension Style Overrides Comparing and Listing Dimension Styles Plotting Drawings Plotting Drawing in AutoCAD Plotting Drawings Using the Plot Dialog box Adding Plotters PLOTTERMANAGER Command Editing Plotter Configuration Importing PCP/PC2 Configuration Files Setting the Plot Parameters Working with Page Setups Modifying a Page Setup Importing a Page Setup STUDENT ASSESSMENT Students will be assigned various homework and lab projects and, using AutoCAD, should be able to complete them with an average of 80% competency. Page 5 of 5 Rev: Nov. 2, 2006
Auto-CAD 2005 Seminar DFTG 1091
HOUSTON COMMUNITY COLLEGE SOUTHWEST Auto-CAD 2005 Seminar DFTG 1091 Date and Time of class: Class CRN: Instructor s Name: School Site: Phone number: HOUSTON COMMUNITY COLLEGE SOUTHWEST COURSE SYLLABUS
More information1: INTRODUCTION TO AUTOCAD
AutoCAD syllabus 1: INTRODUCTION TO AUTOCAD Starting AutoCAD AutoCAD Screen Components Drawing Area Command Window Navigation bar Status bar Invoking Commands in AutoCAD Keyboard Ribbon Application Menu
More informationCOURSE: INTRODUCTION TO CAD GRADES: UNIT: Measurement
UNIT: Measurement - Students will demonstrate correctness in measuring using various scales and instruments. Demonstrate the various marks that make up a ruler including 1/16, 1/8, ¼ and ½. Assessment
More informationRequired Materials For complete material(s) information, refer to
Butler Community College Science, Technology, Engineering, and Math Division Brett Trimpe Revised Spring 2016 Implemented Fall 2016 COURSE OUTLINE AutoCAD Basics Course Description EN 107. AutoCAD Basics.
More informationRequired Materials: Textbook: Grabowski, R. (2004). Using AutoCAD 2004: Basics. Clifton Park, N.Y: Delmar Learning.
Butler Community College Business, Technology, and Workforce Development COURSE OUTLINE AutoCAD Basics Mel Whiteside Spring 2004 Course Description: EN107. AutoCAD Basics. 3 hours credit. This course will
More information06/17/02 Page 1 of 12
Understanding the Graphical User Interface When you start AutoCAD, the AutoCAD window opens. The window is your design work space. It contains elements that you use to create your designs and to receive
More informationCAYUGA COMMUNITY COLLEGE Division of Natural and Health Sciences, Mathematics and Technology ENGR 126 Computer Aided Design 4 Credit Hours
CAYUGA COMMUNITY COLLEGE Division of Natural and Health Sciences, Mathematics and Technology ENGR 126 Computer Aided Design 4 Credit Hours COURSE DESCRIPTION Develop basic drafting skills using microcomputer
More informationKankakee Community College
Kankakee Community College Course prefix and number: DRFT 2114 Course title: AutoCAD I Credit hours: 4 Lecture hours: 2.5 Lab hours: 3 Semester: Spring 2015 Catalog description: This course introduces
More informationMastering AutoCAD 2D
Course description: Mastering AutoCAD 2D Design and shape the world around you with the powerful, flexible features found in AutoCAD software, one of the world s leading 2D design applications. With robust
More informationTutorial Guide to AutoCAD 2014
Tutorial Guide to AutoCAD 2014 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following websites
More informationTutorial Guide to AutoCAD 2013
Tutorial Guide to AutoCAD 2013 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S Schroff Development Corporation For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com
More informationAutoCAD LT of 5
AutoCAD LT 2010 This course explores the latest tools and techniques covering all draw commands and options, editing, dimensioning, hatching, and plotting techniques available with AutoCAD LT 2010. The
More informationTutorial Guide to AutoCAD 2015
Tutorial Guide to AutoCAD 2015 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)
More informationCOURSE OUTLINE. Course Number Course Title Credits DRA190 Introduction to Computer-Aided Drafting 2
COURSE OUTLINE Course Number Course Title Credits DRA190 Introduction to Computer-Aided Drafting 2 Hours: Co- or Pre-requisite lecture/lab/other 1/2 Catalog description (2009-2011) Catalog Implementation
More informationAutoCAD Essentials. Course Length: 3 days
AutoCAD Essentials Course Length: 3 days The AutoCAD Essentials training course is designed for those using AutoCAD with a Windows operating system. This training course is not designed for the AutoCAD
More informationSAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE. Introduction to Computers and AutoCAD
SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE COURSE TITLE: Introduction to Computers and CODE NO. : SEMESTER: 2 PROGRAM: AUTHOR: Civil Engineering Technician Construction
More informationDean Muccio AutoCAD Interior Designer. for the. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices.
Dean Muccio AutoCAD 2020 for the Interior Designer AutoCAD for Mac and PC SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
More informationDean Muccio. AutoCAD 2018 for the. Interior Designer. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices.
Dean Muccio AutoCAD 2018 for the Interior Designer AutoCAD for Mac and PC SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
More information1 Higher National Unit credit at SCQF level 7: (8 SCQF credit points at SCQF level 7)
Higher National Unit specification General information Unit code: DW1E 34 Superclass: CH Publication date: August 2006 Source: Scottish Qualifications Authority Version: 03 (August 2016) Unit purpose This
More informationSPRINGFIELD TECHNICAL COMMUNITY COLLEGE ACADEMIC AFFAIRS
SPRINGFIELD TECHNICAL COMMUNITY COLLEGE ACADEMIC AFFAIRS Course Number: ARBT 125 Department: Architecture and Building Technology Course Title: Architectural CAD I Semester: Fall Year: 2013 Objectives/
More information9'1 -c,f' -,;; Y DEC COURSE OUfLINE COURSE TITLE: INTRODUCTION TO AUTOCAD CODE NO : CAD 120 SEMESTER: I ARCHITECTURAL TECHNICIAN
SAULT STE. MARIE, ON SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY COURSE OUfLINE COURSE TITLE: INTRODUCTION TO AUTOCAD CODE NO : SEMESTER: I PROGRAM: ARCHITECTURAL TECHNICIAN INSTRUCTOR: H. PIETRZAKOWSKI
More informationSKKK 1021 Engineering Drawing
SKKK 1021 Engineering Drawing Introduction to AutoCAD Agus Arsad Introduction Overview & background Starting, interface & file system Basic drawing commands Basic editing commands View command Why use
More informationAutoCAD /AutoCAD LT Essentials
AutoCAD /AutoCAD LT Essentials Course Length: 3 days The AutoCAD /AutoCAD LT Essentials training course is designed for those using AutoCAD or AutoCAD LT with a Windows operating system. This training
More informationTechnical Drawing 101 with AutoCAD 2018
Technical Drawing 101 with AutoCAD 2018 A Multidisciplinary Guide to Drafting Theory and Practice with Video Instruction Douglas Smith Antonio Ramirez Ashleigh Fuller SDC PUBLICATIONS Better Textbooks.
More informationDharmapuri LAB MANUAL. : B.E. - Civil Engineering Year & Semester : I Year / II Semester
Dharmapuri 636 703 LAB MANUAL Regulation : 2013 Branch : B.E. - Civil Engineering Year & Semester : I Year / II Semester CE6261-COMPUTER AIDED DRAFTING AND MODELLING LABORATORY ICAL ENG VVIT DEPARTMENT
More informationIsometric Circles and Arcs
AutoCAD and Its Applications BASICS Supplemental Material Chapter 4 Isometric Circles and Arcs On an isometric drawing, circles appear as ellipses and arcs as elliptical arcs. You must properly align isometric
More informationARC By default AutoCAD will draw an ARC through three selected points. Options can be set at the start and within the command.
DFTG 1309 Final Review Notes I. Draw commands: LINE (draws a series of lines) Valid input: Pick button Cartesian coordinates Absolute (2,3) Relative rectangular (@2,3) Relative polar (@ 2
More informationENGINEERING GRAPHICS ESSENTIALS
ENGINEERING GRAPHICS ESSENTIALS with AutoCAD 2012 Instruction Introduction to AutoCAD Engineering Graphics Principles Hand Sketching Text and Independent Learning CD Independent Learning CD: A Comprehensive
More information1.Module. AutoCAD Course Content. Getting Started with : Vasundhara Sector 14-A, Plot No , Near Vaishali Metro Station,Ghaziabad
1.Module AutoCAD Course Content Getting Started with : Starting the Software User Interface Working with Commands Cartesian Workspace Opening an Existing Drawing File Viewing Your Drawing Saving Your Work
More informationESSENTIALS. Munir M. Hamad Autodesk Approved Instructor
AUTOCAD 2010 ESSENTIALS Munir M. Hamad Autodesk Approved Instructor 76299_FMxx_FINAL.indd i 6/1/09 11:00:49 AM World Headquarters Jones and Bartlett Publishers 40 Tall Pine Drive Sudbury, MA 01776 978-443-5000
More informationBasic Computer Aided Drafting (DFTG 1309) Credit: 3 semester credit hours (2 hours lecture, 4 hours lab) Prerequisite/Co-requisite: DFTG-1305
Basic Computer Aided Drafting (DFTG 1309) Credit: 3 semester credit hours (2 hours lecture, 4 hours lab) Prerequisite/Co-requisite: DFTG-1305 Course Description An introduction to computer aided drafting.
More informationFirst Level 2D Fundamentals
AutoCAD 2016 Tutorial First Level 2D Fundamentals Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to
More informationAutoCAD 2014 Tutorial - First Level: 2D Fundamentals
AutoCAD 2014 Tutorial - First Level: 2D Fundamentals Randy H. Shih Multimedia Disc SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Video presentations
More informationCOLLEGE OF DUPAGE Architecture Basic CADD-AutoCAD
COLLEGE OF DUPAGE Architecture 1211 - Basic CADD-AutoCAD Mark Pearson COD Main #: 630.942.2763 Mailbox location: TEC 1061 Office Hours: TEC 1050 M,W: 11am-12:30pm T, R: 4:00pm-6pm E-Mail: pearson@cod.edu
More informationBasic 2D drawing skills in AutoCAD 2017
Basic 2D drawing skills in AutoCAD 2017 This Tutorial is going to teach you the basic functions of AutoCAD and make you more efficient with the program. Follow all the steps so you can learn all the skills.
More informationSYLLABUS. Apprenticeship Training Scheme
SYLLABUS For the trade of CAD-CAM OPERATOR CUM PROGRAMMER UNDER Apprenticeship Training Scheme Government of India Ministry of Labour & Employment Directorate General of Employment & Training New Delhi-110001
More informationPTC Technical Specialists E-Newsletter Date: April 1, 2006
PTC Technical Specialists E-Newsletter Date: April 1, 2006 PTC Product Focus: A) What s New in Detail Drawings for Wildfire 3.0 Tips of the Month: B) Windchill Supplier Management Solution A) Tricks with
More informationPrinciples and Practice:
Principles and Practice: An Integrated Approach to Engineering Graphics and AutoCAD 2014 Randy H. Shih Multimedia Disc SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Video presentations
More informationAutoCAD 2D I. Module 16. Isometric and Dimensioning. IAT Curriculum Unit PREPARED BY. January 2011
AutoCAD 2D I Module 16 Isometric and Dimensioning PREPARED BY IAT Curriculum Unit January 2011 Institute of Applied Technology, 2011 Module 16 Auto CAD Self-paced Learning Modules AutoCAD 2D Isometric
More informationA Practical Guide to AutoCAD 2019
A Practical Guide to AutoCAD 2019 Tracy Chadwick and Rick Ellis Foreword written by Lynn Allen A CADapult Press Publication Copyright Copyright CADapult Press, Inc. 2018 All rights reserved. No part of
More informationADA Curriculum for Pre-Engineering Students Correlation Guide
ADA Curriculum for Pre-Engineering Students Correlation Guide Madsen/Autodesk Inventor 7: Basics Through Advanced Note: The concepts presented in the ADA Curriculum are covered in the text as they pertain
More informationPrinciples and Practice
Principles and Practice An Integrated Approach to Engineering Graphics and AutoCAD 2016 Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)
More informationSketching & Auto CAD (Computer Aided Design) - Mechanical Design
Western Technical College 10606113 Sketching & Auto CAD (Computer Aided Design) - Mechanical Design Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits
More informationTECHNICAL DESIGN I (540)
DESCRIPTION The first assessment in a series, Technical Design I prepares students to develop technical knowledge and skills required to plan and prepare scale pictorial interpretations of engineering
More informationAn Introduction to Dimensioning Dimension Elements-
An Introduction to Dimensioning A precise drawing plotted to scale often does not convey enough information for builders to construct your design. Usually you add annotation showing object measurements
More informationComputer Assisted Drafting (CAD) Level I & II
Computer Assisted Drafting (CAD) Level I & II Program Description: Level I The Computer Assisted Drafting program prepares students for successful careers beginning as entry level design drafters in Architectural,
More informationIntroduction to IntelliCAD 6
Introduction to IntelliCAD 6 These notes explain the basic concepts and techniques for doing 2D line drawings, with dimensions, arranged onto sheets for printing, using the 6.4 or 6.6 versions of IntelliCAD
More informationINTRODUCTION to CAD ACAD BASICS. 2.1 Starting with ACAD. 2.2 Layout and sketching. 2.3 Drawing environment. 2.4 Elements of drawing
INTRODUCTION to CAD ACAD BASICS 2.1 Starting with ACAD 2.2 Layout and sketching 2.3 Drawing environment 2.4 Elements of drawing 2.4.1 Draw commands 2.5 3D functions 2.6 Starting the drawing 2.6.1 Drawing
More informationFundamentals III PROJECT EXERCISE
4 Fundamentals III PROJECT EXERCISE This project exercise provides point-by-point instructions for setting up the drawing with layers and then creating the objects shown in Figure P4 1. project EXERCISE
More informationComputer Aided Drafting and Design Competence
POLYTECH High School Class of 2012 Student: Instructors: Carlton Norris, Robert Bogdziewicz Instructor Signature: Date: Student Signagure: Date: Competency Based Education objectives rating: 1= Was introduced
More informationAutocad Basics 7/28/2009. Chapter 14 - Learning Objectives
Chapter 14 - Learning Objectives Autocad Basics Chapter 14 July 28, 2009 Use grips to stretch, copy, move, rotate, scale, and mirror objects. Edit objects using the Quick Properties panel and the Properties
More informationParametric Design 1
Western Technical College 10606115 Parametric Design 1 Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits 3 This course is designed to introduce students
More informationCOURSE OUTLINE. School of Engineering Technology & Applied Science. Advanced Manufacturing & Automation Technology (AMAT)
COURSE OUTLINE SCHOOL: DEPARTMENT: PROGRAM: COURSE TITLE: COURSE CODE: School of Engineering Technology & Applied Science Advanced Manufacturing & Automation Technology (AMAT) Mechanical Engineering Technology
More informationCOURSE SYLLABUS. Course Prefix Number:
COURSE SYLLABUS COURSE IDENTIFICATION Course Prefix Number: ETEC121 Course Title: Engineering Graphics I Division: Applied Science Division Program: Industrial Engineering Technology Credit Hours: 3 Revision
More informationPELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS MICROSTATION W/LAB CID 1200
PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS MICROSTATION W/LAB CID 1200 Class Hours: 3.0 Credit Hours: 4.0 Laboratory Hours: 3.0 Date Revised: Spring 99 NOTE: This course is not designed
More informationRelease: 1. MEM30031A Operate computer-aided design (CAD) system to produce basic drawing elements
Release: 1 MEM30031A Operate computer-aided design (CAD) system to produce basic drawing elements MEM30031A Operate computer-aided design (CAD) system to produce basic drawing elements Modification History
More informationUNIT Computer Aided Draughting (CAD) for Engineers (SCQF level 5)
National Unit Specification: general information CODE F5H4 11 SUMMARY This Unit may form part of a National Qualification Group Award or may be offered on a free standing basis. This largely practical
More informationActivity 5.2 Making Sketches in CAD
Activity 5.2 Making Sketches in CAD Introduction It would be great if computer systems were advanced enough to take a mental image of an object, such as the thought of a sports car, and instantly generate
More informationESSEX COUNTY COLLEGE Engineering Technologies & Computer Sciences Division ENR 106 Intermediate Computer-Aided Design Course Outline
ESSEX COUNTY COLLEGE Engineering Technologies & Computer Sciences Division ENR 106 Intermediate Computer-Aided Design Course Outline Course Number & Name: ENR 106 Intermediate Computer-Aided Design Credit
More informationPELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS. FUNDAMENTALS OF TECHNICAL DRAWING W/LAB CID 1100 (formerly CID 1104)
PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS FUNDAMENTALS OF TECHNICAL DRAWING W/LAB CID 1100 (formerly CID 1104) Class Hours: 3.0 Credit Hours: 3.0 Laboratory Hours: 3.0 Revised: Spring
More informationTest Code: 8294 / Version 1
Pennsylvania Customized Assessment Blueprint Test Code: 8294 / Version 1 Copyright 2014. All Rights Reserved. General Assessment Information Blueprint Contents General Assessment Information Written Assessment
More informationAn Introduction to Autodesk Inventor 2011 and AutoCAD Randy H. Shih SDC PUBLICATIONS. Schroff Development Corporation
An Introduction to Autodesk Inventor 2011 and AutoCAD 2011 Randy H. Shih SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation An Introduction to Autodesk Inventor 2011 and AutoCAD 2011
More informationAutoCAD LT 2010 Tutorial
AutoCAD LT 2010 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. AutoCAD LT 2010 Tutorial iii Table
More informationEngineering Drawing I
Instructional Unit Advanced Assembly Drawings -Introduction To Types of Assembly Drawings. -Students will be able -Identify component Class Discussions 3.1.10.B, to identify the details information in
More informationME-441 COMPUTER SIMULATION AND ANALYSIS
ME-441 COMPUTER SIMULATION AND ANALYSIS IN MECHANICAL ENGINEERING Instructor: Dr. Herli Surjanhata Mechanical Engineering Department Office: 328 MEC Phone: (973) 596-3317 e-mail: surjanhata@adm.njit.edu
More informationCOMPUTER AIDED DRAFTING LAB (333) SMESTER 4
COMPUTER AIDED DRAFTING LAB (333) SMESTER 4 Introduction to Computer Aided Drafting: The method of preparing engineering drawing by using the computer software is known as Computer Aided Drafting (CAD).
More informationTable of Contents. Part I Introduction to CorelCAD Introducing CorelCAD About CorelCAD Benefits of Using CorelCAD...
Table of Contents Part I Introduction to C 2013.... 1 1 Introducing C 2013.... 3 About C... 4 Benefits of Using C....4 Impressive Compatibility... 4 Familiar User Interface.... 5 Drafting Tools.... 5 Collaboration....
More informationA TUTORIAL GUIDE TO FOR WINDOWS* Includes Coverage of. Addison-Wesley Publishing Company
A TUTORIAL GUIDE TO AUTOCAD RELEASE 13 FOR WINDOWS* Includes Coverage of AutoVision and AutoCAD Designer Shawna D. Lockhart TT Addison-Wesley Publishing Company Reading, Massachusetts Menlo Park, California
More informationESSEX COUNTY COLLEGE Engineering Technologies and Computer Sciences Division ENR 103 Engineering Graphics and Introduction to CAD Course Outline
ESSEX COUNTY COLLEGE Engineering Technologies and Computer Sciences Division ENR 103 Engineering Graphics and Introduction to CAD Course Outline Course Number & Name: ENR 103 Engineering Graphics and Introduction
More informationCreo Parametric 1.0. for Engineers and Designers. CADCIM Technologies 525 St. Andrews Drive Schererville, IN 46375, USA (www.cadcim.
Creo Parametric 1.0 for Engineers and Designers CADCIM Technologies 525 St. Andrews Drive Schererville, IN 46375, USA (www.cadcim.com) Contributing Author Sham Tickoo Professor Department of Mechanical
More informationStudent s Signature Completion Date. High School Teacher s Signature. Recommended Grade High School. CAD software used: CAM software used:
Student s Name 2 Credits College Now/CTE Student Outcomes Checklist cocc.edu/departments/college-now/ Student s Signature Completion Date High School Teacher s Signature Recommended Grade High School CAD
More information2. To develop basic skills in the use of drawing instruments and drafting techniques.
IT-111 ENGINEERING DRAFTING SYLLABUS Instructor: R. Edward Rode= Office: Room 110-4, Anzalone Hall Hours: Refer to Schedule Phone: (985-549-2092) Fax : (985-549-5532) Email : erode@selu.edu Course Title:
More informationMIDLAND COLLEGE SYLLABUS DFTG 1305 TECHNICAL DRAFTING 2-4
Course Description: Text, References, and Supplies: A computer-aided modeling course. Development of three-dimensional drawings and models from engineering sketches and orthographic drawings and utilization
More informationCOURSE OF STUDY UNIT PLANNING GUIDE COMPUTER AIDED DESIGN (CAD) 1 GRADE LEVEL: MICHAEL WEBER, ASST PRINCIPAL ENGINEERING/TECHNOLOGY SUPERVISOR
COURSE OF STUDY UNIT PLANNING GUIDE FOR: COMPUTER AIDED DESIGN (CAD) 1 GRADE LEVEL: 10 12 PREPARED BY: 5 CREDITS CURT BANICKI 1 FULL YEAR JAMES HAHN MICHAEL WEBER, ASST PRINCIPAL ENGINEERING/TECHNOLOGY
More informationArranging and Patterning Objects
C H A P T E R Arranging and Patterning Objects Learning Objectives After completing this chapter, you will be able to do the following: Relocate objects using the MOVE tool. Change the angular positions
More informationPELLISSIPPI STATE COMMUNITY COLLEGE MASTER SYLLABUS AUTOCAD FOR INTERIOR DESIGN: STUDIO IV IDT 2305
PELLISSIPPI STATE COMMUNITY COLLEGE MASTER SYLLABUS AUTOCAD FOR INTERIOR DESIGN: STUDIO IV IDT 2305 Class Hours: 3 Credit Hours: 4 Laboratory Hours: 3 Date Revised: Spring 2011 NOTE: This course is designed
More informationCAD Orientation (Mechanical and Architectural CAD)
Design and Drafting Description This is an introductory computer aided design (CAD) activity designed to give students the foundational skills required to complete future lessons. Students will learn all
More informationComputer Aided Draughting for Engineers
Higher National Unit Specification General information for centres Unit title: Computer Aided Draughting for Engineers Unit code: DR1X 34 Unit purpose: This Unit has been designed to enable candidates
More informationTwo-Dimensional Drawing
22 Chapter Cxxxx 40757 3/19/08 10:24 AM Page 1 7% 3% 3% 18% 20% 22 Chapter CXXXX 40757 Page 1 03/18/08 MD 22 Two-Dimensional Drawing objectives After completing this chapter, you should be able to Identify
More informationAutodesk AutoCAD 2013 Fundamentals
Autodesk AutoCAD 2013 Fundamentals Elise Moss SDC P U B L I C AT I O N S Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following websites to learn more
More informationTable of Contents. Templates to download. Configuring your system Customizing your wheel mouse System Requirements
Table of Contents Introduction About this book Templates to download About the Author Configuring your system Customizing your wheel mouse System Requirements Intro-1 Intro-1 Intro-1 Intro-2 Intro-8 Intro-9
More informationCAD Mechanical Design I
EXAM INFORMATION Items 58 Points 85 Prerequisites NONE Course Length ONE SEMESTER Career Cluster ARCHITECTURE AND CONSTRUCTION MANUFACTURING SCIENCE, TECHNOLOGY, ENGINEERING AND MATHEMATICS Performance
More informationPELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS ADVANCED MECHANICAL DRAWING CID 1220
PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS ADVANCED MECHANICAL DRAWING CID 1220 Class Hours: 3.0 Credit Hours: 4.0 Laboratory Hours: 3.0 Date Revised: Fall 00 NOTE: This course is not
More informationTemplate Drawings. Template Drawings. AutoCAD Essentials
AutoCAD Essentials Starting a new drawing using any CAD software requires a series of steps. Measurement units, sheet size, layer designations, text fonts and text sizes plus many more items must be set.
More informationDrafting and Design 1A
Syllabus Drafting and Design 1A Overview This one-semester course is intended as a practical, hands-on guide to help you understand the various techniques, standards, and tools used in drafting and design.
More informationContent Area: Career Education Department: Technology Course: Advanced Engineering and Architectural Drawing
SHORE REGIONAL HIGH SCHOOL DISTRICT West Long Branch, New Jersey Content Area: Career Education Department: Technology Course: Mr. Leonard Schnappauf, Superintendent/Principal Dr. Robert McGarry, Director
More informationLesson 6 2D Sketch Panel Tools
Lesson 6 2D Sketch Panel Tools Inventor s Sketch Tool Bar contains tools for creating the basic geometry to create features and parts. On the surface, the Geometry tools look fairly standard: line, circle,
More informationIsometric Drawing Chapter 26
Isometric Drawing Chapter 26 Sacramento City College EDT 310 EDT 310 - Chapter 26 - Isometric Drawing 1 Drawing Types Pictorial Drawing types: Perspective Orthographic Isometric Oblique Pictorial - like
More informationAutoCAD 2018 Fundamentals
Autodesk AutoCAD 2018 Fundamentals Elise Moss SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to learn more about
More informationCOURSE OF STUDY UNIT PLANNING GUIDE COMPUTER AIDED DESIGN (CAD) 1 GRADE LEVEL: MICHAEL WEBER, ASST PRINCIPAL ENGINEERING/TECHNOLOGY SUPERVISOR
COURSE OF STUDY UNIT PLANNING GUIDE FOR: COMPUTER AIDED DESIGN (CAD) 1 GRADE LEVEL: 10-12 PREPARED BY: 5 CREDITS CURT BANICKI 1 FULL YEAR JAMES HAHN MICHAEL WEBER, ASST PRINCIPAL ENGINEERING/TECHNOLOGY
More informationNEW RIVER COMMUNITY COLLEGE DUBLIN, VIRGINIA COURSE PLAN. Prepared By: CAD Faculty Member Fall, Approved By: Fall, 2014
NEW RIVER COMMUNITY COLLEGE DUBLIN, VIRGINIA COURSE PLAN Course Number and Title: CAD 114 - Drafting I Prepared By: CAD Faculty Member Fall, 2014 (Instructors) (Date) Approved By: Fall, 2014 (Dean) (Date)
More informationIN-CLASS DEMONSTRATION. Introduction to AutoCAD 2011 and 2-Dimensional Drawing
IN-CLASS DEMONSTRATION Introduction to AutoCAD 2011 and 2-Dimensional Drawing GISC, UNIVERSITY OF CALIFORNIA BERKELEY LABORATORY GOALS In this module you will be introduced to the AutoCAD 2011 interface
More informationPart I Introduction to CorelCAD
Table of Contents Part I Introduction to CorelCAD 1 Introducing CorelCAD for Mac... 3 About CorelCAD... 3 Benefits of Using CorelCAD....4 Impressive Compatibility... 4 Familiar User Interface.... 4 Drafting
More informationTable of Contents PART I INTRODUCTION TO CORELCAD Introducing CorelCAD About CorelCAD Benefits of Using CorelCAD...
Table of Contents PART I INTRODUCTION TO CORELCAD.... 1 1 Introducing CorelCAD.... 3 About CorelCAD... 3 Benefits of Using CorelCAD....4 Impressive Compatibility... 4 Familiar User Interface.... 4 Drafting
More informationAutoCAD 2020 Fundamentals
Autodesk AutoCAD 2020 Fundamentals ELISE MOSS Autodesk Certified Instructor SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
More informationCOURSE TITLE: ENGINEERING DRAWING 2 GRADES LENGTH: FULL YEAR SCHOOLS: RUTHERFORD HIGH SCHOOL RUTHERFORD, NEW JERSEY DATE:
COURSE TITLE: ENGINEERING DRAWING 2 GRADES 10-12 LENGTH: FULL YEAR SCHOOLS: RUTHERFORD HIGH SCHOOL RUTHERFORD, NEW JERSEY DATE: SPRING 2015 Engineering Drawing 2-2 Rutherford High School Rutherford, NJ
More informationTools for Design. with VEX Robot Kit: Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS
Tools for Design with VEX Robot Kit: AutoCAD 2011 and Autodesk Inventor 2011 2D Drawing 3D Modeling Hand Sketching Randy H. Shih Oregon Institute of Technology INSIDE: SUPPLEMENTAL FILES ON CD SDC PUBLICATIONS
More informationIsometric Drawings. Figure A 1
A Isometric Drawings ISOMETRIC BASICS Isometric drawings are a means of drawing an object in picture form for better clarifying the object s appearance. These types of drawings resemble a picture of an
More informationRapid CADD Training Techniques
Rapid CADD Training Techniques Warner Richeson, CADD Professor Business, Information & Engineering Technologies Collin College, Frisco, Texas 75074 ABSTRACT The purpose of this paper is to describe a technique
More informationChapter 2. Drawing Sketches for Solid Models. Learning Objectives
Chapter 2 Drawing Sketches for Solid Models Learning Objectives After completing this chapter, you will be able to: Start a new template file to draw sketches. Set up the sketching environment. Use various
More information