CAYUGA COMMUNITY COLLEGE Division of Natural and Health Sciences, Mathematics and Technology ENGR 126 Computer Aided Design 4 Credit Hours
|
|
- Victoria Bruce
- 5 years ago
- Views:
Transcription
1 CAYUGA COMMUNITY COLLEGE Division of Natural and Health Sciences, Mathematics and Technology ENGR 126 Computer Aided Design 4 Credit Hours COURSE DESCRIPTION Develop basic drafting skills using microcomputer CAD systems. Provide students with the skills necessary to develop detail drawings, including orthographic projection and the application of standard dimensioning practices. Drawing assignments utilize the CAD system operators to draw, modify, dimension and plot 2 dimensional part drawings. Two class hours / four lab hours weekly LEARNING OUTCOMES Upon completion of this course a student will be able to: Develop basic CAD skills for further study in the development of engineering drawings. Apply Orthographic projection principles to sketch part drawings. Apply Orthographic projection principles to create multi view drawings. Understand the basic principles of the Cad user interface, input methods, basic file management, drawing setup, layer commands, and basic CAD settings to standardize drawings. Use CAD operators/commands to draw, modify, and dimension 2 dimensional part drawing. Interpret and apply the ANSI standards for Multi-view drawings. Apply annotation, dimensions and tolerances to drawings in accordance with ANSI standards. Create auxiliary and section views. Produce printed CAD plots and prints for review drawings. Utilize techniques to create and revise CAD drawings in a timely and efficient manner. COURSE OUTLINE 1. Overview a. Introduction to AutoCAD b. Overview of AutoCAD Commands c. Your computer, Input Methods d. Screen Layout e. Using Dialogue Boxes f. Toolbars g. Opening and Saving a Drawing h. Drawing Setup i. Drawing Aids j. Getting HELP! k. Activities: On screen tour of the system. Overview of AutoCAD and Windows
2 2. Basics of AutoCAD a. Windows Operating System b. Drawing Environment c. Drawing Aids d. Snap e. Overview of Draw and Edit Commands f. Inquire g. UNDO h. OSNAP i. Viewing and Zooming the drawing 3. Engineering Drawing Fundamentals a. Engineering drawing standards b. Components of an engineering part drawing 4. Drawing Setup a. Drawing Settings b. Drawing Aids c. Coordinate Systems d. Draw Commands e. Edit Commands f. Utility Commands g. Layer Commands h. LTSCALE i. Display Commands j. Edit Commands k. Selecting Objects l. OOPS m. TEXT Commands. n. Activities: Setup A Border Prototype Drawing 5. Basic Draw a. Draw Commands: Line, Circle, Arc, Point, Ellipse, Rectangle, b. Draw Commands: Point, Solid, Donut c. Text d. Construction Lines e. UNDO & REDO f. The UCS ICON and DDUCS Commands. g. Origin and Saving UCS s. 6. Basic Modify and Edit Commands a. Modify Commands: Selecting Objects b. Break, Extend, Move, Rotate, Stretch Scale, Change, Explode, Trim, Change
3 c. Editing text 7. Geometric Constructions a. Using Copy, Polygon, Osnaps, Break, Extend, Rotate, Move, Selecting Objects to edit. 8. Inquire and Utilities a. Inquire Commands: Area, List, Distance, ID Point. 9. Intermediate Draw Commands a. Ellipse b. Doughnuts c. Offset d. Polygons 10. Intermediate Edit Commands a. DDModify b. Change c. Array d. Mirror e. PEDIT Commands f. Edit with Grips 11. Advanced Operations a. Pline b. Splines c. Editing Plines 12. Template Drawings and Plotting a. Paper Space and Model Space b. Viewports c. Plotting and Printing drawings 13. Constructing Multiview Drawings a. Drawing Multiview Drawings b. Orthographic Projection c. Constructing Geometric shapes. d. 2D Orthographic Projection Drawings e. Standard arrangement of views f. Visualizing part views g. Surface and edge representation h. Orthographic sketching 14. Introduction to Dimensioning
4 a. Introduction to Dimensioning, Terminology, Types of Dims, Dimensioning Commands, Accuracy and Text placement. b. Dimensioning units c. Dimensioning lines d. Standard placement of dimensions e. Size dimensions f. Location dimensions g. AutoCAD dimension variables h. Creating dimension styles i. Modifying dimension styles j. Adding Text and Annotations 15. Advanced Dimensioning and Tolerances a. DIM VARS b. Tolerances c. Standard tolerance representation d. Modifying dimension styles for tolerances e. Using leaders and general notes 16. File Management a. File Management b. File Utilities c. Windows File Management 17. Inquire and Utility Commands a. Utility Display Commands b. Time c. MISC Commands 18. Introduction to Sectioning a. Sectional Views b. Hatching and Boundaries c. Hatch commands d. Constructing Sectional and Patterned Drawings 19. Introduction to Auxiliary Views a. Drawing Auxiliary views using 2D projection b. Using reference lines to project c. Representing curves, ellipse, and complex features 20. Text, Font & Styles a. Text commands b. Creating and Placing Text c. Special Text d. Mtext e. Creating charts
5 21. Using Blocks and Creating Drawings a. Creation of Assembly Drawings b. Block Commands c. Insert Commands. d. Write Block used to insert to other drawings 22. Drawing Environments and Productivity Hints a. Getting an edge b. System Variables c. Short Cut Aliases METHOD OF INSTRUCTION This course will be taught using lecture, demonstration with computer projection system, CD multimedia, and CAD assignments during supervised lab.
COURSE: INTRODUCTION TO CAD GRADES: UNIT: Measurement
UNIT: Measurement - Students will demonstrate correctness in measuring using various scales and instruments. Demonstrate the various marks that make up a ruler including 1/16, 1/8, ¼ and ½. Assessment
More informationRequired Materials For complete material(s) information, refer to
Butler Community College Science, Technology, Engineering, and Math Division Brett Trimpe Revised Spring 2016 Implemented Fall 2016 COURSE OUTLINE AutoCAD Basics Course Description EN 107. AutoCAD Basics.
More informationRequired Materials: Textbook: Grabowski, R. (2004). Using AutoCAD 2004: Basics. Clifton Park, N.Y: Delmar Learning.
Butler Community College Business, Technology, and Workforce Development COURSE OUTLINE AutoCAD Basics Mel Whiteside Spring 2004 Course Description: EN107. AutoCAD Basics. 3 hours credit. This course will
More informationTutorial Guide to AutoCAD 2014
Tutorial Guide to AutoCAD 2014 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following websites
More informationTutorial Guide to AutoCAD 2013
Tutorial Guide to AutoCAD 2013 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S Schroff Development Corporation For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com
More informationTutorial Guide to AutoCAD 2015
Tutorial Guide to AutoCAD 2015 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)
More informationKankakee Community College
Kankakee Community College Course prefix and number: DRFT 2114 Course title: AutoCAD I Credit hours: 4 Lecture hours: 2.5 Lab hours: 3 Semester: Spring 2015 Catalog description: This course introduces
More informationARC By default AutoCAD will draw an ARC through three selected points. Options can be set at the start and within the command.
DFTG 1309 Final Review Notes I. Draw commands: LINE (draws a series of lines) Valid input: Pick button Cartesian coordinates Absolute (2,3) Relative rectangular (@2,3) Relative polar (@ 2
More informationAutoCAD LT of 5
AutoCAD LT 2010 This course explores the latest tools and techniques covering all draw commands and options, editing, dimensioning, hatching, and plotting techniques available with AutoCAD LT 2010. The
More informationCOURSE OUTLINE. Course Number Course Title Credits DRA190 Introduction to Computer-Aided Drafting 2
COURSE OUTLINE Course Number Course Title Credits DRA190 Introduction to Computer-Aided Drafting 2 Hours: Co- or Pre-requisite lecture/lab/other 1/2 Catalog description (2009-2011) Catalog Implementation
More informationENGINEERING GRAPHICS ESSENTIALS
ENGINEERING GRAPHICS ESSENTIALS with AutoCAD 2012 Instruction Introduction to AutoCAD Engineering Graphics Principles Hand Sketching Text and Independent Learning CD Independent Learning CD: A Comprehensive
More informationSAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE. Introduction to Computers and AutoCAD
SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE COURSE TITLE: Introduction to Computers and CODE NO. : SEMESTER: 2 PROGRAM: AUTHOR: Civil Engineering Technician Construction
More informationMastering AutoCAD 2D
Course description: Mastering AutoCAD 2D Design and shape the world around you with the powerful, flexible features found in AutoCAD software, one of the world s leading 2D design applications. With robust
More informationDean Muccio AutoCAD Interior Designer. for the. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices.
Dean Muccio AutoCAD 2020 for the Interior Designer AutoCAD for Mac and PC SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
More informationDean Muccio. AutoCAD 2018 for the. Interior Designer. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices.
Dean Muccio AutoCAD 2018 for the Interior Designer AutoCAD for Mac and PC SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
More informationAutoCAD Lab 1 Basics and Drawing Fundamentals. EGS 1007 Engineering Concepts and Methods
AutoCAD Lab 1 Basics and Drawing Fundamentals EGS 1007 Engineering Concepts and Methods Will the Computer Ever REPLACE Pencil and Paper Drawings? Maybe someday When a computer becomes as light, small,
More information1: INTRODUCTION TO AUTOCAD
AutoCAD syllabus 1: INTRODUCTION TO AUTOCAD Starting AutoCAD AutoCAD Screen Components Drawing Area Command Window Navigation bar Status bar Invoking Commands in AutoCAD Keyboard Ribbon Application Menu
More informationAutoCAD 2014 Tutorial - First Level: 2D Fundamentals
AutoCAD 2014 Tutorial - First Level: 2D Fundamentals Randy H. Shih Multimedia Disc SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Video presentations
More information06/17/02 Page 1 of 12
Understanding the Graphical User Interface When you start AutoCAD, the AutoCAD window opens. The window is your design work space. It contains elements that you use to create your designs and to receive
More informationSKKK 1021 Engineering Drawing
SKKK 1021 Engineering Drawing Introduction to AutoCAD Agus Arsad Introduction Overview & background Starting, interface & file system Basic drawing commands Basic editing commands View command Why use
More informationIntroduction to IntelliCAD 6
Introduction to IntelliCAD 6 These notes explain the basic concepts and techniques for doing 2D line drawings, with dimensions, arranged onto sheets for printing, using the 6.4 or 6.6 versions of IntelliCAD
More informationFirst Level 2D Fundamentals
AutoCAD 2016 Tutorial First Level 2D Fundamentals Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to
More informationAutoCAD Essentials. Course Length: 3 days
AutoCAD Essentials Course Length: 3 days The AutoCAD Essentials training course is designed for those using AutoCAD with a Windows operating system. This training course is not designed for the AutoCAD
More informationPrinciples and Practice:
Principles and Practice: An Integrated Approach to Engineering Graphics and AutoCAD 2014 Randy H. Shih Multimedia Disc SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Video presentations
More informationAuto-CAD 2005 Seminar DFTG 1091
HOUSTON COMMUNITY COLLEGE SOUTHWEST Auto-CAD 2005 Seminar DFTG 1091 Date and Time of class: Class CRN: Instructor s Name: School Site: Phone number: HOUSTON COMMUNITY COLLEGE SOUTHWEST COURSE SYLLABUS
More information1 Higher National Unit credit at SCQF level 7: (8 SCQF credit points at SCQF level 7)
Higher National Unit specification General information Unit code: DW1E 34 Superclass: CH Publication date: August 2006 Source: Scottish Qualifications Authority Version: 03 (August 2016) Unit purpose This
More informationAuto-CAD Complete DFTG 1091
HOUSTON COMMUNITY COLLEGE SOUTHWEST Auto-CAD Complete DFTG 1091 Date and Time of class: Class CRN: Instructor s Name: School Site: Phone number: HOUSTON COMMUNITY COLLEGE SOUTHWEST COURSE SYLLABUS Auto-CAD
More informationSketching & Auto CAD (Computer Aided Design) - Mechanical Design
Western Technical College 10606113 Sketching & Auto CAD (Computer Aided Design) - Mechanical Design Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits
More informationAutoCAD /AutoCAD LT Essentials
AutoCAD /AutoCAD LT Essentials Course Length: 3 days The AutoCAD /AutoCAD LT Essentials training course is designed for those using AutoCAD or AutoCAD LT with a Windows operating system. This training
More informationSPRINGFIELD TECHNICAL COMMUNITY COLLEGE ACADEMIC AFFAIRS
SPRINGFIELD TECHNICAL COMMUNITY COLLEGE ACADEMIC AFFAIRS Course Number: ARBT 125 Department: Architecture and Building Technology Course Title: Architectural CAD I Semester: Fall Year: 2013 Objectives/
More information1.Module. AutoCAD Course Content. Getting Started with : Vasundhara Sector 14-A, Plot No , Near Vaishali Metro Station,Ghaziabad
1.Module AutoCAD Course Content Getting Started with : Starting the Software User Interface Working with Commands Cartesian Workspace Opening an Existing Drawing File Viewing Your Drawing Saving Your Work
More informationAutoCAD LT 2010 Tutorial
AutoCAD LT 2010 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. AutoCAD LT 2010 Tutorial iii Table
More informationComputer Aided Drafting and Design Competence
POLYTECH High School Class of 2012 Student: Instructors: Carlton Norris, Robert Bogdziewicz Instructor Signature: Date: Student Signagure: Date: Competency Based Education objectives rating: 1= Was introduced
More informationPrinciples and Practice
Principles and Practice An Integrated Approach to Engineering Graphics and AutoCAD 2016 Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)
More informationADA Curriculum for Pre-Engineering Students Correlation Guide
ADA Curriculum for Pre-Engineering Students Correlation Guide Madsen/Autodesk Inventor 7: Basics Through Advanced Note: The concepts presented in the ADA Curriculum are covered in the text as they pertain
More informationSYLLABUS. Apprenticeship Training Scheme
SYLLABUS For the trade of CAD-CAM OPERATOR CUM PROGRAMMER UNDER Apprenticeship Training Scheme Government of India Ministry of Labour & Employment Directorate General of Employment & Training New Delhi-110001
More information9'1 -c,f' -,;; Y DEC COURSE OUfLINE COURSE TITLE: INTRODUCTION TO AUTOCAD CODE NO : CAD 120 SEMESTER: I ARCHITECTURAL TECHNICIAN
SAULT STE. MARIE, ON SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY COURSE OUfLINE COURSE TITLE: INTRODUCTION TO AUTOCAD CODE NO : SEMESTER: I PROGRAM: ARCHITECTURAL TECHNICIAN INSTRUCTOR: H. PIETRZAKOWSKI
More informationComputer-Aided Design (CAD) ก ก CAD. 3 Working with drawing: ก Drawing ก Drawing ก ก Drawing Paper size Scale factor Text. Object ก Orthogonal mode ก
1 ก ก ก ก ก ก ก ก ก ก CAD ก ก ก 1 ก : ก ก ก CAD ก Computer-Aided Design (CAD) ก ก CAD 2 ก : ก Installation CAD ก ก Start ก CAD ก ก Toolbar ก ก 3 Working with drawing: ก Drawing ก Drawing ก ก Drawing Paper
More informationTechnical Drawing 101 with AutoCAD 2018
Technical Drawing 101 with AutoCAD 2018 A Multidisciplinary Guide to Drafting Theory and Practice with Video Instruction Douglas Smith Antonio Ramirez Ashleigh Fuller SDC PUBLICATIONS Better Textbooks.
More informationDimensioning the Bracket Problem
C h a p t e r 11 Dimensioning the Bracket Problem In this chapter, you will learn the following to World Class standards: 1. Dimensioning a Multiple View Drawing 2. Placing Center Marks on a Multiple View
More informationCreating a 2D Drawing in Paper Space
C h a p t e r 16 Creating a 2D Drawing in Paper Space In this chapter, we will learn the following to World Class standards: 1. Converting 3D Solids to 2D Orthographic Views 2. Open the Solid Part Drawing
More informationDharmapuri LAB MANUAL. : B.E. - Civil Engineering Year & Semester : I Year / II Semester
Dharmapuri 636 703 LAB MANUAL Regulation : 2013 Branch : B.E. - Civil Engineering Year & Semester : I Year / II Semester CE6261-COMPUTER AIDED DRAFTING AND MODELLING LABORATORY ICAL ENG VVIT DEPARTMENT
More informationComputer Assisted Drafting (CAD) Level I & II
Computer Assisted Drafting (CAD) Level I & II Program Description: Level I The Computer Assisted Drafting program prepares students for successful careers beginning as entry level design drafters in Architectural,
More informationINTRODUCTION to CAD ACAD BASICS. 2.1 Starting with ACAD. 2.2 Layout and sketching. 2.3 Drawing environment. 2.4 Elements of drawing
INTRODUCTION to CAD ACAD BASICS 2.1 Starting with ACAD 2.2 Layout and sketching 2.3 Drawing environment 2.4 Elements of drawing 2.4.1 Draw commands 2.5 3D functions 2.6 Starting the drawing 2.6.1 Drawing
More informationTHENI CE COMPUTER AIDED DESIGN & DRAFTING LABORATORY MANUAL
NADAR SARASWATHI COLLEGE OF ENGINEERING AND TECHNOLOGY THENI CE 6711 - COMPUTER AIDED DESIGN & DRAFTING LABORATORY MANUAL PREPARED BY RECOMMENDED BY APPROVED BY STAFF INCHARGE HOD/CIVIL PRINCIPAL GENERAL
More informationMechanical Drawing. Unit 2 Study Guide for Chapters 6-10
Mechanical Drawing Unit 2 Study Guide for Chapters 6-10 Chapter 6 Multiview Drawing Section 6.1 Understanding Orthographic Projection A. Technical Drawing: How can a technical drawing give more accurate
More informationRelease: 1. MEM30031A Operate computer-aided design (CAD) system to produce basic drawing elements
Release: 1 MEM30031A Operate computer-aided design (CAD) system to produce basic drawing elements MEM30031A Operate computer-aided design (CAD) system to produce basic drawing elements Modification History
More informationMaking Standard Note Blocks and Placing the Bracket in a Drawing Border
C h a p t e r 12 Making Standard Note Blocks and Placing the Bracket in a Drawing Border In this chapter, you will learn the following to World Class standards: Making standard mechanical notes Using the
More informationCOLLEGE OF DUPAGE Architecture Basic CADD-AutoCAD
COLLEGE OF DUPAGE Architecture 1211 - Basic CADD-AutoCAD Mark Pearson COD Main #: 630.942.2763 Mailbox location: TEC 1061 Office Hours: TEC 1050 M,W: 11am-12:30pm T, R: 4:00pm-6pm E-Mail: pearson@cod.edu
More informationParametric Design 1
Western Technical College 10606115 Parametric Design 1 Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits 3 This course is designed to introduce students
More informationAn Introduction to Autodesk Inventor 2011 and AutoCAD Randy H. Shih SDC PUBLICATIONS. Schroff Development Corporation
An Introduction to Autodesk Inventor 2011 and AutoCAD 2011 Randy H. Shih SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation An Introduction to Autodesk Inventor 2011 and AutoCAD 2011
More informationESSENTIALS. Munir M. Hamad Autodesk Approved Instructor
AUTOCAD 2010 ESSENTIALS Munir M. Hamad Autodesk Approved Instructor 76299_FMxx_FINAL.indd i 6/1/09 11:00:49 AM World Headquarters Jones and Bartlett Publishers 40 Tall Pine Drive Sudbury, MA 01776 978-443-5000
More informationA TUTORIAL GUIDE TO FOR WINDOWS* Includes Coverage of. Addison-Wesley Publishing Company
A TUTORIAL GUIDE TO AUTOCAD RELEASE 13 FOR WINDOWS* Includes Coverage of AutoVision and AutoCAD Designer Shawna D. Lockhart TT Addison-Wesley Publishing Company Reading, Massachusetts Menlo Park, California
More informationITT Technical Institute. CD121 Drafting/CAD Methods Onsite and Online Course SYLLABUS
ITT Technical Institute CD121 Drafting/CAD Methods Onsite and Online Course SYLLABUS Credit hours: 4 Contact/Instructional hours: 50 (30 Theory Hours, 20 Lab Hours) Prerequisite(s) and/or Corequisite(s):
More informationFundamentals III CHAPTER PROJECT EXERCISE
CHAPTER 4 Fundamentals III PROJECT EXERCISE This project exercise provides point-by-point instructions for setting up the drawing with layers and then creating the objects shown in Figure P4 1. FIGURE
More informationAutoCAD D. Introduction to computer. Introduction to AutoCAD Screen Layout. Limits, Units Dsettings (Isoplane, Snap)
AutoCAD 2010 2D Introduction to computer Introduction to AutoCAD Screen Layout. Limits, Units Dsettings (Isoplane, Snap) Line,Circle,Arc, Erase, New, Open, Save, Save as Qnew Open Close Quit Polygon Move
More informationCourse Title: Mechanical Drawing Topic/Concept: Views Of Objects Time Allotment: 3 6 Weeks Unit Sequence: 1 Major Concepts to be learned:
Course Title: Mechanical Drawing Topic/Concept: Views Of Objects Time Allotment: 3 6 Weeks Unit Sequence: 1 1. Sketching skills 2. Orthographic projection 3. Visualization of views 4. Location of lines
More informationBasic 2D drawing skills in AutoCAD 2017
Basic 2D drawing skills in AutoCAD 2017 This Tutorial is going to teach you the basic functions of AutoCAD and make you more efficient with the program. Follow all the steps so you can learn all the skills.
More informationContent Area: Career Education Department: Technology Course: Advanced Engineering and Architectural Drawing
SHORE REGIONAL HIGH SCHOOL DISTRICT West Long Branch, New Jersey Content Area: Career Education Department: Technology Course: Mr. Leonard Schnappauf, Superintendent/Principal Dr. Robert McGarry, Director
More informationFigure 1 - Motor City Electric Company Toolbar. LP Low Power HP High Power FA Fire Alarm C Communications LIT Lighting
AutoCAD AutoCAD is the primary drawing program used by Motor City Electric Company. This program helps to engineer layouts of a buildings electrical equipment, lighting, and power that is to be sent out
More informationFundamentals III PROJECT EXERCISE
4 Fundamentals III PROJECT EXERCISE This project exercise provides point-by-point instructions for setting up the drawing with layers and then creating the objects shown in Figure P4 1. project EXERCISE
More informationTest Code: 8294 / Version 1
Pennsylvania Customized Assessment Blueprint Test Code: 8294 / Version 1 Copyright 2014. All Rights Reserved. General Assessment Information Blueprint Contents General Assessment Information Written Assessment
More informationIntroduction to AutoCAD 2012
Page 1 Introduction to AutoCAD 2012 Alf Yarwood Answers to Multiple choice questions Chapter 1 1. The toolbar at the top of the AutoCAD 2012 window is: (a) The Draw toolbar (b) The Modify toolbar (c) The
More informationPELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS. FUNDAMENTALS OF TECHNICAL DRAWING W/LAB CID 1100 (formerly CID 1104)
PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS FUNDAMENTALS OF TECHNICAL DRAWING W/LAB CID 1100 (formerly CID 1104) Class Hours: 3.0 Credit Hours: 3.0 Laboratory Hours: 3.0 Revised: Spring
More informationTools for Design. with VEX Robot Kit: Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS
Tools for Design with VEX Robot Kit: AutoCAD 2011 and Autodesk Inventor 2011 2D Drawing 3D Modeling Hand Sketching Randy H. Shih Oregon Institute of Technology INSIDE: SUPPLEMENTAL FILES ON CD SDC PUBLICATIONS
More informationWAYNESBORO AREA SCHOOL DISTRICT CURRICULUM INTRODUCTION TO ENGINEERING
UNIT: Classroom rules and procedures NO. OF DAYS: 2 KEY LEARNING(S): Expectations and classroom procedures UNIT : What are the expectations and classroom procedures in the CAD room 3.4.12.A3. Demonstrate
More informationCOMPUTER AIDED ENGINEERING DRAWING
FIRST SEMESTER COMPUTER AIDED ENGINEERING DRAWING COMPUTER SIMULATION LAB DEPARTMENT OF ELECTRICAL ENGINEERING Prepared By: Checked By: Approved By: Engr. Sidra Jhangir Engr. M.Nasim Khan Dr.Noman Jafri
More informationTable of Contents. Part I Introduction to CorelCAD Introducing CorelCAD About CorelCAD Benefits of Using CorelCAD...
Table of Contents Part I Introduction to C 2013.... 1 1 Introducing C 2013.... 3 About C... 4 Benefits of Using C....4 Impressive Compatibility... 4 Familiar User Interface.... 5 Drafting Tools.... 5 Collaboration....
More informationCreate Compelling 2D Sections, Details, and Auxiliary Views from AutoCAD 3D Models
GEN20552-L Create Compelling 2D Sections, Details, and Auxiliary Views from AutoCAD 3D Models J.C. Malitzke Digital JC CAD Learning Objectives Learn how to create drawing views of AutoCAD 3D models for
More informationChapter 7 Isometric Drawings
Chapter 7 Isometric Drawings In this assignment, we are going to look at creating isometric drawings with AutoCAD. These drawing appear to be three dimensional but they are not. An AutoCAD isometric drawing
More informationAutocad Basics 7/28/2009. Chapter 14 - Learning Objectives
Chapter 14 - Learning Objectives Autocad Basics Chapter 14 July 28, 2009 Use grips to stretch, copy, move, rotate, scale, and mirror objects. Edit objects using the Quick Properties panel and the Properties
More informationTABLE OF CONTENTS. Chapter 1: Drawing In AutoCAD
TABLE OF CONTENTS Chapter 1: Drawing In AutoCAD 1.1) Introduction 1-1 1.2) AutoCAD s User Interface 1-4 1.3) The Drawing Area 1-6 1.4) Accessing AutoCAD Commands 1-8 1.5) Standard Toolbar 1-19 1.6) Customize
More informationAppendix B: Autocad Booklet YR 9 REFERENCE BOOKLET ORTHOGRAPHIC PROJECTION
Appendix B: Autocad Booklet YR 9 REFERENCE BOOKLET ORTHOGRAPHIC PROJECTION To load Autocad: AUTOCAD 2000 S DRAWING SCREEN Click the start button Click on Programs Click on technology Click Autocad 2000
More information8 Working Drawings in AutoCAD
8 Working Drawings in AutoCAD Most engineering designs consist of more than a single part. Usually there are a several or many parts that must fit and work together. When we are creating the drawings of
More informationIn this activity students will create an orthographic drawing. Students will also change line layers.
Description In this activity students will create an orthographic drawing. Students will also change line layers. Lesson Objectives The student will be able to: Define orthographic drawing Draw three to
More informationAutoCAD for Windows Express
AutoCAD for Windows Express Tim McCarthy AutoCAD for Windows Express With 195 Figures Springer-Verlag London Berlin Heidelberg New York Paris Tokyo Hong Kong Barcelona Budapest Timothy J. McCarthy, PhD
More informationTECHNICAL DESIGN I (540)
DESCRIPTION The first assessment in a series, Technical Design I prepares students to develop technical knowledge and skills required to plan and prepare scale pictorial interpretations of engineering
More informationCATIA Instructor-led Live Online Training Program
Course Outline Introduction & Understanding to CATIA Environment Introduction & Understanding to CATIA interface Starting new file Understand the Sketcher workbench of CATIA V5 Start a new file in the
More informationChapter 6 Title Blocks
Chapter 6 Title Blocks In previous exercises, every drawing started by creating a number of layers. This is time consuming and unnecessary. In this exercise, we will start a drawing by defining layers
More informationContent Map For Career & Technology
Content Strand: Applied Academics CT-DD1-1 CT-DD2-1 CT-DD3-1 CT-DD4-1 Use math concepts in Use math concepts in Use math concepts in Use math concepts in design and engineering design and engineering design
More informationCE 102 Computer Aided Drafting (Software package: AutoCAD 2007)
CE 102 Computer Aided Drafting (Software package: AutoCAD 2007) Department of Civil Engineering Ahsanullah University of Science and Technology November, 2017 Preface CAD stands for Computer Aided Drafting.
More informationCOURSE TITLE: ENGINEERING DRAWING 2 GRADES LENGTH: FULL YEAR SCHOOLS: RUTHERFORD HIGH SCHOOL RUTHERFORD, NEW JERSEY DATE:
COURSE TITLE: ENGINEERING DRAWING 2 GRADES 10-12 LENGTH: FULL YEAR SCHOOLS: RUTHERFORD HIGH SCHOOL RUTHERFORD, NEW JERSEY DATE: SPRING 2015 Engineering Drawing 2-2 Rutherford High School Rutherford, NJ
More informationEditing Polylines. Sacramento City College Engineering Design Technology. Editing Polylines 1
Editing Polylines Sacramento City College Engineering Design Technology Editing Polylines 1 Objectives Use the PLINE command to draw polylines and polyarcs. Edit existing polylines with the PEDIT command.
More informationCompleted project drawing (dimensions added for reference)
CHAPTER 5 Fundamentals IV PROJECT EXERCISE This project exercise provides point-by-point instructions for setting up the drawing with layers and then creating the objects shown in the accompanying figure.
More informationDrawing a Living Room and Family Room Floorplan
Appendix C Drawing a Living Room and Family Room Floorplan In this chapter, you will learn the following to World Class standards: Draw a Living Room and Family Room Floorplan Draw the Walls and Stairs
More informationAUTO CAD CIVIL ENGINEERING LABORATORY MANUAL DEPARTMENT OF
AUTO CAD LABORATORY MANUAL DEPARTMENT OF CIVIL ENGINEERING MANDATORY INSTRUCTIONS 1. Students should report to the labs concerned as per the timetable. 2. Record should be updated from time to time and
More informationSpringer-Vedag London Ltd.
AutoCAD Express NT Springer-Vedag London Ltd. Timothy McCarthy AutoCAD Express NT Covering Release 14, Springer Dr Timothy McCarthy Department of Civil and Structural Engineering UMIST P.O. Box 88 Manchester
More informationCOMPUTER AIDED DRAFTING LAB (333) SMESTER 4
COMPUTER AIDED DRAFTING LAB (333) SMESTER 4 Introduction to Computer Aided Drafting: The method of preparing engineering drawing by using the computer software is known as Computer Aided Drafting (CAD).
More informationTable of Contents. Templates to download. Configuring your system Customizing your wheel mouse System Requirements
Table of Contents Introduction About this book Templates to download About the Author Configuring your system Customizing your wheel mouse System Requirements Intro-1 Intro-1 Intro-1 Intro-2 Intro-8 Intro-9
More informationTechnology Education Grades Drafting I
Technology Education Grades 9-12 Drafting I 46 Grade Level: 9, 10, 11, 12 Technology Education, Grades 9-12 Drafting I Prerequisite: None Drafting I is an elective course which provides students the opportunity
More informationENGINEERING DRAWING AM 09
AM SYLLABUS (2014) ENGINEERING DRAWING AM 09 SYLLABUS 1 Engineering Drawing AM09 (Available in September) Syllabus Paper I (3 hrs) + Paper II (3 hrs) + coursework Aims The aims of the syllabus are to further
More informationTable of contents. User interface 1: Customizable tool palette... 6 User interface 2: General GUI improvements... 7
Table of contents WELCOME TO ADVANCE CONCRETE 2014... 5 USER INTERFACE ENHANCEMENTS... 6 User interface 1: Customizable tool palette... 6 User interface 2: General GUI improvements... 7 MODELING... 10
More informationCOMPUTER AIDED DRAFTING (PRACTICAL) INTRODUCTION
LANDMARK UNIVERSITY, OMU-ARAN LECTURE NOTE: 3 COLLEGE: COLLEGE OF SCIENCE AND ENGINEERING DEPARTMENT: MECHANICAL ENGINEERING PROGRAMME: MCE 511 ENGR. ALIYU, S.J Course title: Computer-Aided Engineering
More informationOVERRIDE PRESETS. Use the properties window on individual lines to accomplish this change.
OVERRIDE PRESETS Despite having set line weights up in a drawing, it is often necessary to add individual lines of different weights for example, ground lines in sections and elevations must be a thicker
More informationRapid CADD Training Techniques
Rapid CADD Training Techniques Warner Richeson, CADD Professor Business, Information & Engineering Technologies Collin College, Frisco, Texas 75074 ABSTRACT The purpose of this paper is to describe a technique
More informationSOLIDWORKS 2015 and Engineering Graphics
SOLIDWORKS 2015 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
More informationOfficial Guide to Certified SolidWorks Associate Exams: CSWA, CSDA, CSWSA-FEA
Official Guide to Certified SolidWorks Associate Exams: CSWA, CSDA, CSWSA-FEA SolidWorks 2012-2015 An authorized CSWA preparation exam guide with additional information on the CSDA and CSWSA-FEA exams
More informationPart I Introduction to CorelCAD
Table of Contents Part I Introduction to CorelCAD 1 Introducing CorelCAD for Mac... 3 About CorelCAD... 3 Benefits of Using CorelCAD....4 Impressive Compatibility... 4 Familiar User Interface.... 4 Drafting
More informationAutoCAD 2D I. Module 16. Isometric and Dimensioning. IAT Curriculum Unit PREPARED BY. January 2011
AutoCAD 2D I Module 16 Isometric and Dimensioning PREPARED BY IAT Curriculum Unit January 2011 Institute of Applied Technology, 2011 Module 16 Auto CAD Self-paced Learning Modules AutoCAD 2D Isometric
More information80 ` AutoCAD 2D I. Module 11. Object Snap PREPARED BY. IAT Curriculum Unit. February 2011
80 ` AutoCAD 2D I Object Snap PREPARED BY IAT Curriculum Unit February 2011 Institute of Applied Technology, 2011 Auto CAD Self-paced Learning Modules AutoCAD 2D Object Snap Learning Outcomes: When you
More information