J. Base 1 pc. 1 pc. P. Shelf 2 pcs. Gate Leg. 1 pc. Head Cap Bolt 13 pcs. (+1 extra) Cam Lock Screw. Cam Lock. 20 pcs. (+1 extra)
|
|
- Elmer Stanley
- 5 years ago
- Views:
Transcription
1 C Kitchen Island with Breakfast Bar IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. PART LIST A. Top B. Side Panel C. Middle Panel D. Side Panel H. Back Stretcher E. Back Panel F. Back Panel G. Back Piece I. Front Piece J. Base M. Divider P. Shelf S. Handle Arm K. Door L. Door N. & O. (For s, packed in a separate carton) HARDWARE LIST Q. Shelf R. Gate Leg T. Round Arm U. Knife Box Caster two lock two non-lock Small Hex Wrench Hex Wrench 13 pcs. (+1 extra) for Caster and Gate Leg 20 pcs. (+1 extra) Screw 6 pcs. (+1 extra) 6 pcs. (+1 extra) Pull Handle 8 pcs. Adjustable Pin 1 (+1 extra) Wood Plug 6 pcs.(+2 extra) Tools Required For Assembly : Phillips screwdriver Home Styles Consumer Assistance Line and servicedesk@homestyles-furniture.com Revised date : 23Mar2011
2 IMPORTANT Do not tighten up all the screws until each part is properly assembled. You should keep Hex Wrench in the safe place as you may need to tighten up the s in the future. Assembly Instructions 2/4 STEP 1 Attach four Casters to Base (J) with s. (See figure 1) J Locking Caster (On Front) (Figure 1) STEP 2 Attach Side Panel (B) to Base (J) with s. B C Attach Middle Panel (C) and Back Piece (G) to Base (J). G J C G E M I F H E Locking Caster (On Front) STEP 3 Slide Back Panel (E) and (F) to the unit. Attach Back Stretcher (H) and Front Piece (I) to the unit with s. D Attach Side Panel (D) and Divider (M) to the unit with s.
3 Assembly Instructions 3/4 STEP 4 Attach Gate Leg (R) at the back of unit with s. (See figure 2) R R (Figure 2) U B S T S P Q D P STEP 5 Assemble Handle Arm (S) to Side Panel (D) with s. Slide Round Arm (T) into place. Adjustable Pin Attach Knife Box (U) to Side Panel (B) with s. Insert Adjustable Pins into side panels and middle panels at the desired level. Place Shelf (P) and (Q).
4 Assembly Instructions 4/4 Screw A STEP 6 Put Screws into the pre-drilled holes at Top (A). Place Top (A) onto the unit, using s. (See figure 3) A (Figure 3) N O K K L L (Figure 4) STEP 7 Assemble Pull Handles to Door (K) and (L) with s. (See figure 4) Spring Pin Attach Door (K) by inserting the lower Spring Pin into the hole until it clicks (See figure 5) and then do the same for the upper Spring Pin. (Figure 5) Do the same process for Door (L). Slide (N) and (O) into place. STEP 8 Cover up all holes with Wood Plugs.
5 (N) (O) N2 O2 N5 O5 PART LIST N2, O2. Back Part for each drawer,. Front Part for each drawer,. Side Part for each drawer,. Side Part for each drawer N5, O5. Base Part for each drawer HARDWARE LIST Pull Handle (short) for Base Part 1 (+1 extra) (long) for Side Part 16 pcs. (+1 extra) Assembly Instructions N2 O2 MAKE SURE ROLLER IS ON THE BACK (Figure 1) Slide the plywood Base Part (N5, O5) into the grooves on Side Parts (, ) and (, ). Be sure to push the plywood all the way forward so it meets the Front Part (, ). (See figure 2) N5 Using a Philips screwdriver, insert s (long) into the pre-drilled holes as shown, tighten half way. (See figure 1) O5 (Figure 2) Unfinished Side N2 N5 O2 O5 * If you are missing any of these parts, please contact our DMI Customer Service Department at or fax us at (Figure 3) Assemble the Pull Handle with s on the Front Part(, ). (See figure 4) Insert s (short) into the pre-drilled holes on Base Part (N5, O5), then tighten all s. (See figure 3) (Figure 4)
D. Middle Panel. C. Middle Panel. 1 pc. B. Side Panel 1 pc. I. Back Stretcher. 1 pc. J. Front Stretcher. 1 pc. S. Door 1 pc. T.
itchen Cart IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken great care
More informationC Cuisine Cart IMPORTANT NOTE
88 9001 001C Cuisine Cart IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken
More informationC PART LIST HARDWARE LIST. Kitchen Cart IMPORTANT NOTE
88 9200 006C Kitchen Cart IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken
More informationM. Door 1 Pc. 1 Pc. Door 1 Pc. 1 Pc. M3x20 Wood Screw (long) 8 Pcs. (+1 extra) M3x10 Wood Screw for Magnet 8 Pcs. (+1 extra)
88 5516 653 Barnside Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have
More informationBuffet with Doors and Drawers
88 5100 002 Buffet with s and s IMPORAN NO Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have
More informationA. Top Unit 1 Pc. For assembly see instructions in carton:
88 5005 9441 Kitchen Island IMPRTANT NTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have taken
More informationColonial Classic Bar
88 5528 991 Colonial Classic Bar IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts.
More informationArts & Crafts Dining Buffet IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prev
88 580 69 Arts & Crafts Dining Buffet IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood
More informationPantry IMPORTANT NOTE
88 5022 69 Pantry IPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken great
More informationLeft Unit. G. Shelf 1 pc. Small Cam Lock 6 pcs.(+1 extra) Cam Lock Screw 2 pcs.(+1 extra) Cam Lock Screw 6 pcs.(+1 extra)
88 5180 181 Art & Craft Computer Desk (Cottage Oak) IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring
More informationBarnside Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratch
88 5516 653 Barnside Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have
More informationPedestal Desk IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches
88 5549 181 Pedestal Desk IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have taken
More informationFor assembly see instructions in carton
88 5523 943 Kitchen Island IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occurring to the parts. We have
More informationPantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or oth
88 5076 691 Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occurring to the parts. We have taken great
More informationB. Side Panel. E. Middle Panel 1 pc. 1 pc. 1 pc. S. Side Rack. 1 pc. T. Base Rack. U. Pipe 3 pcs. M6x35 Head Cap Bolt 14 pcs.
IMPORTANT 88 5089 95C Kitchen Cart Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly
More informationNantucket Buffet
88 5022 611 Nantucket Buffet IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts. We
More informationHomestead Bar Cabinet IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent s
88 5527 991 Homestead Bar Cabinet IMPRTANT NTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts.
More informationIMPORTANT NOTE Do not tighten up all the screws until each part is properly assembled. You should keep Hex Wrench in the safe place as you may need to
88509995 C Kitchen Center Dear Our Valuable Customers, Please follow our assembly instructions in every step, we guarantee that you will get the perfect merchandise. Thank you so much for purchasing our
More informationKitchen Island IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches o
88 5170 943 Kitchen Island IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these
More informationC PART LIST HARDWARE LIST. Tools Required For Assembly : Philips screwdriver. Thai Patent Pending Numbers
88508695 Stainless Steel Top Kitchen art with Wood reakfast ar Thank you for purchasing our quality products. Please carefully check the quantity of the parts and hardware. Please also read this assembly
More informationCloset Wall Drawer Unit
IMPORTANT 88 5531 752 Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions
More informationJ. Shelf 4 pcs. L. Door. K. Door. 1 pc. Magnet. 2 pcs. Adjustable Pin. 16 pcs. (+1 extra)
88 5523 61 Buffet IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly
More informationCloset Wall Drawer Unit
88 5531 751 Closet Wall Drawer Unit A. B. C. Shelf D. E. F. For assembly see instructions in carton 88 5531 752. 88 5531 752 Closet Wall Drawer Unit G. H. I. Plinth M. Bottom L. N. 2 pc. J. K. O. Drawer
More informationC. Middle Panel. E. Front Post. J. Front Stretcher. O Brush Chrome Pipes. P. Handle Arm. U. KD. Drawer. Head Cap Bolt 14 pcs.
88 9100 001 itchen art (Natural Finish) IMPRTNT NTE arefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts.
More informationPedestal Desk. D. Side Panel 1 pc. E. Side Panel. I. Back Panel. 2 pcs.
IMPORTANT 88 5530 182 Pedestal Desk Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these
More informationStorage Island. M3x25 Wood Screw for Side Panels 4 pcs. (+1 extra) Adjustable Pin 12 pcs. (+1 extra)
IMPORTANT 88 5531 923 Storage Island Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these
More informationC. Side Panel 1 pc. B. Side Panel. 1 pc. J2. Shelf. 4 pcs. Adjustable Pin 24 pcs. (+1 extra) M3.5x16 Wood Screw 20 pcs. (+1 extra) 2 pcs.
IMPORTANT 20 05180 0307 Hutch Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly
More informationCloset Wall Hanging Unit
IMPORTANT 88 5531 772 Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions
More informationCloset Wall Shelf Unit
IMPORTANT 88 5530 762 arefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. arefully and strictly follow these assembly instructions
More informationIMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damag
IMPORTANT 20 05520 0772 Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions
More informationKitchen Work Cabinet Item #377635
Thanks for shopping with Improvements! Kitchen Work Cabinet Item #377635 To order, call 1-800-642-2112 West Chester, OH 45069 Made in Thailand 0912 Rev B If you have any questions regarding this product,
More informationRiverside. Oakmont Queen Storage Bed Assembly Instructions
Queen Storage Bed Page 1 of 7 8 pcs. 8 pcs. 1 pc. 1 pc. 8 pcs. 8 pcs. 8 pcs. 8 pcs. 1 pc. 1 pc. 20270 --5/0 Sleigh Headboard 20274 --5/0-6/6 Bed Rails 20273 -- 5/0 Storage Footboard, Panels, Slats Queen
More informationRiverside. Windhaven Queen Storage Bed Assembly Instructions
Queen Storage Bed Page 1 of 7 2 pcs. 4 pcs. 4 pcs. 4 pcs. 2 pcs. 5/0 Queen Storage Bed 50773 -- 5/0 Storage Footboard w/platform Note: The 50773 Storage Footboard can be used with the 50770 Panel Headboard
More informationRiverside. Harbor Hill Queen Storage Bed Assembly Instructions
Queen Storage Bed Page 1 of 7 8 pcs. 8 pcs. 1 pc. 2 pcs. 3 pcs. 3 pcs. 4 pcs. 4 pcs. 4 pcs. 1 pc. 1 pc. 8 pcs. 8 pcs. 8 pcs. 2 pcs. 8 pcs. 1 pc. 25770 -- 4/6-5/0 Panel Headboard (NOTE: the 25775 Leather
More informationIMPORTANT SAFETY INSTRUCTIONS
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts that may have come loose inside the carton during shipment IMPORTANT SAFETY INSTRUCTIONS:
More informationRiverside. Harbor Hill King Storage Bed Assembly Instructions
King Storage Bed Page 1 of 7 8 pcs. 8 pcs. 1 pc. 2 pcs. 6 pcs. 3 pcs. 4 pcs. 4 pcs. 4 pcs. 1 pc. 1 pc. 2 pcs. 8 pcs. 8 pcs. 8 pcs. 8 pcs. 25780 -- 6/0-6/6 Panel Headboard (NOTE: the 25785 Leather Headboard
More informationASSEMBLY INSTRUCTIONS MANUAL
PAGE 1 OF 9 RECOMMENDED TOOLS FOR ASSEMBLY: ALLEN WRENCH (INCLUDED) BOX WRENCH (INCLUDED) PHILLIPS SCREW DRIVER (NOT INCLUDED) PARTS IN CARTON: ALLEN WRENCH SCREWS (20 EACH) ROUND HEAD SCREWS (8 EACH)
More informationKA327700TX MARTINVILLE KITCHEN CART - White Assembly Instructions
KA327700TX MARTINVILLE KITCHEN CART - White Assembly Instructions For assistance with assembly contact: Southern Enterprises Inc. Customer Service 1-800-633-5096 service@seidal.com www.seidal.com MARTINVILLE
More informationL.L.Bean. Farmhouse Futon
L.L.Bean Farmhouse Futon Thank you for purchasing our Farmhouse Futon. Assembly of this product requires a Phillips Head Screwdriver and Flat Head Screwdriver. We have found it helpful to have a second
More informationE. Front Stretcher 1 pc. 1 pc. 1 pc. M8x38 Wood Screw (long) 1 pc. (+1 extra) M4x19 Wood Screw (short) 12 pcs. (+1 extra)
88 5134 26 Bench Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions
More informationExpandable Bar Cabinet CF4001
Expandable Bar Cabinet CF4001 Congratulations! You have purchased a stylish piece of Crosley Furniture. We strive to provide fine furniture products, built with quality materials and hand finished details.
More informationMyra Bed Room King Storage Bed Assembly Instructions. Hardware and Parts packed with the Headboard. One Left & One Right H-C
email: Headboard Panel info@riverside-furniture.com King Storage Bed Hardware and Parts packed with the Headboard Headboard Post Headboard Stretcher Page 1 of 7 H-A One Left & One Right H-C M5/16"-18 x
More informationO-Sullivan King 4 Poster Bed O-Sullivan Queen 4 Poster Bed Parts and Hardware List
Parts and Hardware List A. Left Headboard Post 1 pc B. Right Headboard Post 1 pc C. Left Footboard Post 1 pc D. Right Footboard Post 1 pc E. Headboard Panel 1 pc F. Footboard Rail 1 pc. Spindles 4 pcs
More informationDisplay-Top Apothecary Cabinet. Assembly Instructions. Page 1
Display-Top Apothecary Cabinet Assembly Instructions Page 1 Display-Top Apothecary Cabinet Parts List Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean,
More information::kitchensource.com Alt Twin Headboard IMPORTANT NOTE Carefully remove all the parts from the carton and put them individua
::kitchensource.com 88 5530 401 Twin Headboard IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to
More informationFootprint Mobile Assembly Instructions
Footprint Mobile Assembly Instructions 1998754 Revision -1 Complete Series Master Packet If you have any questions concerning these instructions, please call Kimball Office Customer Service. 20 Kimball
More informationWhite Black Espresso Corner Desk Assembly Instructions
White Black Espresso Corner Desk Assembly Instructions Page 1 White / Black / Espresso Corner Desk Parts List Please check packaging for all parts and hardware before discarding. Unpack and lay parts on
More informationThanks for shopping with Improvements! Chapin Secretary Desk Item #398643
Thanks for shopping with Improvements! Chapin Secretary Desk Item #398643 Note: You will receive this desk in two boxes. To order, call 1-800-642-2112 West Chester, OH 45069 Made in China 1111 If you have
More informationStuff-Your-Stuff Platform Bed (Twin and Full)
Stuff-Your-Stuff Platform Bed (Twin and Full) Pre-Assembly: Please read all instructions before beginning assembly. Assembly by two people is a must. Save all packing materials until assembly is complete
More informationThanks for shopping with Improvements! Rolling Kitchen Storage Cart with Wood Top Item #583649
Thanks for shopping with Improvements! Rolling Kitchen Storage Cart with Wood Top Item #58349 Note: Read these instructions carefully before assembling. Tools required: Philips screwdriver (not included).
More informationL.L.Bean. Wooden Slat Bed
L.L.Bean Wooden Slat Bed Thank you for purchasing our Slat Bed. Assembly of this product requires A Phillips head screwdriver. We have found it helpful to have a second person present in at least one step
More informationVigilant Cigar Humidor Vault. Assembly Instructions
Vigilant Cigar Humidor Vault Assembly Instructions Models: 1000, 1500, and 2000 Congratulations! You have purchased a superior cigar humidor. These humidors have been specifically designed to properly
More informationThanks for shopping with Improvements! Laundry Folding Table with 3 Clothes Hampers Item #
-- Thanks for shopping with Improvements! Laundry Folding Table with 3 Clothes Hampers Item # 568376 Note: Read these instructions carefully before assembling. Tools required: Philips screwdriver (not
More informationHZ8864A0TX / HZ8864B0TX. Metal/Glass Sliding-Door Display Cabinet. Assembly Instructions PO: Each shelf supports up to lb.
HZ8864A0TX / HZ8864B0TX Metal/Glass Sliding-Door Display Cabinet Assembly Instructions For assistance with assembly, contact: Southern Enterprises Inc. Customer Service: 1-800-633-5096 service@seidal.com
More informationFA968800TX Manchester Fireplace Console - Brown Mahogany Assembly Instructions
FA968800TX Manchester Fireplace Console - Brown Mahogany Assembly Instructions For assistance with assembly, contact: Southern Enterprises Inc. Customer Service 1-800-633-5096 service@seidal.com www.seidal.com
More informationItem # Thanks for shopping with Improvements!
Thanks for shopping with Improvements! Hampshire -Door Cabinet Item #5505 To order, call -800-64- West Chester, OH 45069 Made in China PR-6 If you have questions regarding this product, call -800-64- Mon.-Fri.
More informationBIFOLD FUTON FRAME TRINITY ARM. Seat Rails and Slats x 1. *Note: Use 4pc of 100mm Bolts and 4pc of 60mm Bolts to attach the arms to the Stretchers.
1A Parts in this box. 2pc with extra holes 2pc with extra holes & plastic stoppers Arms x 2 Back Rails and Slats x 1 Full Size: Slat Supports x 6 3pc are longer for the Back deck Back Side Rails x 2 Seat
More informationShould you experience any missing or damaged parts, do not return to the store. Please contact us directly at
Congratulations! You have purchased a stylish piece of Crosley Furniture. We strive to provide fine furniture products, built with quality materials and hand finished details. Please carefully follow the
More informationCROWN IMPERIAL ASSEMBLY INSTRUCTIONS
CROWN IMPERIAL ASSEMBLY INSTRUCTIONS Standard Drawer Box Page 1 of 14 Standard Drawer Box Parts Parts Supplied B C D A E F G Page 2 of 14 Part Letter Part Name Quantity 300-600 Deep Pan A Base Panel 1
More informationDOREL ASIA KITCHEN CART
DOREL ASIA Model No: WM6545N (Natural) WM6545W (White) UPC CODE: 0-65857-16525-8 (Natural) 0-65857-16526-5 (White) NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND
More informationThanks for shopping with Improvements! Louvered Space Saver Cabinet Item #512059
Thanks for shopping with Improvements! Louvered Space Saver Cabinet Item #512059 Note: Read these instructions carefully before assembling. Tools required: Philips screwdriver (not included). Find a clean,
More informationThanks for shopping with Improvements! Providence Magazine End Table Item #547337
Thanks for shopping with Improvements! Providence Magazine End Table Item #547337 Note: This table can be assembled: with the Door pivoting from the right side or the left side (instructions show pivot
More informationModern Gatherings 60" TV Console Assembly Instructions
Parts List Page 1 of 6 No. Description Sketch Quantity A Console 1 B Door 1 Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts that may have
More informationL.L.Bean. Platform Bed
L.L.Bean Platform Bed Thank you for purchasing our Platform Bed. Assembly of this product requires a Phillips head and a flat head screwdriver. We have found it helpful to have a second person present
More informationSTEP 1 STEP 2 LEVELER KIT OPTION MOBILE CASTER KIT OPTION
B SERIES INDUSTRIAL BENCHES TOOLS REQUIRED FOR ASSEMBLY Socket set, Open end wrench set, Cordless drill with 3/8" socket bit (Magnetic recommended). BEFORE ASSEMBLY Read through the assembly instructions
More informationQueen Wingback Bed King Wingback Bed
Parts and Hardware List A. Side Rails with Attachment Hooks 2 pcs B. Foot Rail 1 pc C. Head Rail 1 pc D. Center Support Slat 1 pc E. Leg Supports 3 pcs F. Support Slats 4 pcs G. Flat Washers 8 pcs H. Lock
More informationHZ487300TX Javu 2-Drawer Storage
HZ487300TX Javu 2-Drawer Storage Assembly Instructions For assistance with assembly contact: Southern Enterprises Inc. Customer Service 1-800-633-5096 service@seidal.com www.seifurniturestore.com Page
More informationCopyright 2010, by Walker Edison Furniture Co., LLC. All rights reserved.
General Assembly Guidelines I. Insure that all parts and hardware are available before beginning assembly. II. III. IV. Follow each step carefully to insure the proper assembly of this product. Two people
More informationHodedah. HIK 77 L23 5 8'' X D16 6 8'' X H42 1 8''
HIK 77 L3 5 '' X D6 6 '' X H4 '' PART & HARDWARE LIST 4 7 0 3 3 6 4 5 5 A PLASTIC DOWEL M X 5MM M CAP 4 B CB SCREW M3.5 X MM N 0 MAGNET PLATE C CB SCREW M4 X 5MM O 0 MAGNET D CB SCREW M4 X 35MM P CB M3
More informationHOH TOLLERTON WOODEN KITCHEN TROLLEY
HOH TOLLERTON WOODEN KITCHEN TROLLEY Assembly Instructions - please keep for future reference 266/330 Dimensions Width - 83cm Depth - 8cm Height - 89cm Important Please read these instructions fully before
More informationCorner Desk Assembly Instruction PO# HO664200TX White. HO664300TX Black. HO664400TX- Espresso
HO664200TX White HO664300TX Black HO664400TX- Espresso Corner Desk Assembly Instruction For assistance with assembly contact: Southern Enterprises Inc. Customer Service 1-800-633-5096 service@seidal.com
More informationAll Restoration Hardware bunk beds are designed to meet the highest safety standards and comply with all U.S. and Canadian Bunk Bed regulations.
All Restoration Hardware bunk beds are designed to meet the highest safety standards and comply with all U.S. and Canadian Bunk Bed regulations. Page 1 of 13 Assembly Instructions Callum Storage Twin Bunk
More informationHZ492300TX AG-3-DRAWER STORAGE ORGANIZER Assembly Instructions
HZ492300TX AG-3-DRAWER STORAGE ORGANIZER Assembly Instructions For assistance with assembly, contact: Southern Enterprises Inc. Customer Service 1-800-633-5096 service@seidal.com www.seidal.com 1 A HZ492300TX
More informationMULTI-ACTIVITY PLAY TABLE
ASSEMBLY INSTRUCTIONS! WARNING: CHOKING HAZARD - Small parts. Not for children under 3 years.! CAUTION: Adult assembly required. C 2006 Melissa and Doug, Inc. All Rights Reserved www.melissaanddoug.com
More informationASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS UltraHD Rolling Cabinet (Model No. 20238F) 28"W X 18" D X 34.5" H (71.1cm x 45.7cm x 87.6cm) Stainless Steel Finger-print resistant Surface Special Cleaning instructions for work
More informationBridgeport All Wood Assembly Instructions STOP! Please read the following important information!
Revision 6/01/2004 Bridgeport All Wood Assembly Instructions STOP! Please read the following important information! For questions on assembly or parts, DO NOT RETURN product to the store. Contact the experts
More informationSteele TV Stand Stock # BH
LOT NUMBER: DATE PURCHASED: / / Steele TV Stand Stock # BH46-084-899-02 ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store
More informationTV/Media Stand- Mission Oak Finish. Assembly Instructions
TV/Media Stand- Mission Oak Finish Assembly Instructions TV/Media Stand Parts List Please review all parts and hardware before disposing of any packaging. Call Customer Service if missing hardware. Before
More informationHow To Measure Your Finished Opening
3000 Series Bifold Doors How To Measure Your Finished Opening MEASURE FROM RIGHT TO LEFT 2 PLACES (WIDTH) MEASURE FROM TOP TO BOTTOM 2 PLACES (HEIGHT) Tools Required for Assembly: Tools Needed: Phillips
More informationHow to Install Custom Real Wood and Faux Wood Blinds
Before you begin your installation: READ ALL INSTALLATION INSTRUCTIONS! Make sure that you have all tools and hardware needed for installation. Check the installation surface (wall, ceiling, or window
More informationExponents Bench Cushion
Exponents Bench Cushion Power Drill #2 Phillips Bit Bit Holder Page 1 of 2 939500640 Rev A 1. Place cushion on top of the bench, so the black Coalesse tag is in the right rear corner of the bench. 2. From
More informationMISSION AUDIO STAND GBU
MISSION AUDIO STAND Thank you for purchasing our Mission Audio Stand. Assembly of this product requires a Phillips screwdriver and a hammer. We have found it helpful to have a second person present in
More informationWellington Wallbed 700 Series Assembly Instructions
Wellington Wallbed 700 Series Assembly Instructions 1. Read all instructions before proceeding. Not following instructions may result in personal harm or damage to the furniture. 2. 2 people are required
More informationAll Restoration Hardware bunk beds are designed to meet the highest safety standards and comply with all U.S. and Canadian Bunk Bed regulations.
baby&child RESTORATION HARDWARE All Restoration Hardware bunk beds are designed to meet the highest safety standards and comply with all U.S. and Canadian Bunk Bed regulations. Page 1 of 13 Assembly Instructions
More informationWILSHIRE BED. Bed Assembly Instructions. Page 1of 5. LIFESTYLE SOLUTIONS The Fusion Of Function And Comfort With Style
WILSHIRE BED Bed Assembly Instructions. Shorter Canopy Rail Left & Right Head Board Posts Longer Canopy Rail Head Board Panel Metal Pin Slat Support Left & Right Foot Board Posts Slats Foot Board Panel
More informationThanks for shopping with Improvements! Wellesley Cart with Gate Leg Desk Extension Item #504992
Thanks for shopping with Improvements! Wellesley Cart with Gate Leg Desk Extension Item #504992 To order, call 1-800-642-2112 West Chester, OH 45069 Made in China PR-1015 If you have questions regarding
More informationSentinel Series Cigar Humidor End Tables
Sentinel Series Cigar Humidor End Tables Assembly Instructions Models: Sentinel 500, 1000 and 1500 Style: Contemporary SENTINEL ASSEMBLY INSTRUCTIONS Congratulations! You have purchased a superior cigar
More informationHZ1032A0TX/ HZ1032B0TX Shadowbox Wine/Bar Cabinet Assembly Instructions
HZ0A0TX/ HZ0B0TX Shadowbox Wine/Bar Cabinet Assembly Instructions For assistance with assembly contact: Southern Enterprises Inc. Customer Service -800--509 service@seidal.com www.seidal.com Due to weight,
More informationMS555200TX Porter Gaming/Media Console Espresso Finish Assembly Instructions
MS55500TX Porter Gaming/Media Console Espresso Finish Assembly Instructions For assistance with assembly, contact: Southern Enterprises Inc. Customer Service 1-800-6-5096 service@seidal.com www.seidal.com
More informationVibe Buffet Assembly Instructions
ssembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. bolt bolt locking dowel long x nut x x0 screw x8 x H I J K small screw x4 V W safety strap x
More informationPRINCESS SINGLE BED WITH TRUNDLE
PRINCESS SINGLE BED WITH TRUNDLE If you have any questions regarding assembly or if you are missing parts, do not return this item to Sam s Wholesale Club Please call our customer service number and have
More informationAll Restoration Hardware bunk beds are designed to meet the highest safety standards and comply with all U.S. and Canadian Bunk Bed regulations.
All Restoration Hardware bunk beds are designed to meet the highest safety standards and comply with all U.S. and Canadian Bunk Bed regulations. Page 1 of 13 Assembly Instructions Callum Storage Twin Bunk
More informationSeries 4 HV Single Monitor Lift Assembly Instructions
6703 Zinser Street Schofield, WI 54476 6/13/17 Series 4 HV Single Monitor Lift Assembly Instructions Read all the instructions before beginning. Hardware Pack # 53368 Page1 OF 6 Tools Required for Assembly:
More informationEMPEROR RECTANGULAR DINING TABLE + 4 FOLDING CHAIR. Important - Please read these instructions fully before starting assembly
EMPEROR RECTAGULAR G TABLE + FOLG CHAR Assembly nstructions - Please keep for future reference 60356 60357 G TABLE x FOLG CHAR x TABLE imensions Width - 39 cm epth - 7 cm Height - 75 cm CHAR imensions
More informationStrata. urniture. Adriana Instructions. Parts in the Arm Box: Parts in the Body Box: Watch our assembly videos at
1A Watch our assembly videos at www.strataf.com/videos Parts in the Arm Box: Arm - Outside View Arm - Inside View 1B Parts in the Body Box: Back Deck x 1 Seat Deck x 1 with the Feet attached Back Panel
More informationThanks for shopping with Improvements! Mandarin Tansu Step Cabinet Item #512735
Thanks for shopping with Improvements! Mandarin Tansu Step Cabinet Item #512735 This unit can be assembled so the top and middle cabinets are on the left or on the right. Use these instructions for a right-sided
More informationmila-wall (Series100) General Operating Instructions page 1 of 15
mila-wall (Series100) General Operating Instructions page 1 of 15 Step #1: Before setting up walls, lower adjustable leveling feet on each panel approximately 1". This will allow access to the threaded
More informationCopyright Black Box Corporation. All rights reserved Park Drive Lawrence, PA Fax
Copyright 2003. Black Box Corporation. All rights reserved. 1000 Park Drive Lawrence, PA 15055-1018 724-746-5500 Fax 724-746-0746 JULY 2003 RM3010A RM315-R2 RM323-R2 RM329 RM451 RM457 RM3020A RM316 RM324-R2
More information#916 CLASSIC 16 GUN CABINET ASSEMBLY INSTRUCTIONS
Thank you for purchasing this quality product. A list of PARTS and INSTRUCTIONS is included to assist you. Unpack and identify all parts included on the Parts List and Hardware List. If parts are missing,
More informationASSEMBLY INSTRUCTIONS JK270
TOOLS REQUIRED: One knife to open packaging Two ½ wrench or socket (metric 13) One 9/16 wrench or socket (metric 14) One #2 Philips (+) screwdriver NOTE: All bolts are 9/16 (metric 14) and nuts are ½ (metric
More information