L.L.Bean. Platform Bed
|
|
- Abigail Matthews
- 6 years ago
- Views:
Transcription
1 L.L.Bean Platform Bed Thank you for purchasing our Platform Bed. Assembly of this product requires a Phillips head and a flat head screwdriver. We have found it helpful to have a second person present in at least one step of the assembly. 1 of
2 STEP 1 Read through these instructions thoroughly before beginning assembly. We have found this to be of great value when first assembling this product. STEP 2 Remove all parts and hardware from packing material. Wooden pieces should be placed on a non-abrasive surface (like the carton or carpet) to prevent damage to the finish. STEP 3 Identify all parts using parts list at right PARTS A. SIDE RAIL (2) B. HEADBOARD PANEL C. HEADBOARD BRACE D. HEADBOARD POSTS (2) E. LONG SUPPORT BAR (FULL AND QUEEN)* F. SMALL WOODEN LEG (FULL AND QUEEN)* G. WEBBED SLAT SYSTEM *King size will have 2 STEP 4 Identify and count hardware using diagram at right and the list below. Hardware: 8 3 ½" Bolts 4 4" Bolts 12 Barrel Nuts 2 Screws 8 1 ¼" Wooden Dowels 1 Center Leg Hardware (3 ½" bolt & barrel nut)* *NOTE: Twin size will not use the center leg hardware, Full & Queen size will be as pictured, and King size will include 2 sets. Assembly of this product requires a Phillips head and a flat head screwdriver. We have found it helpful to have a second person present in at least one step of the assembly. STEP 5 Locate the headboard panel, headboard brace, and the two headboard posts. The headboard panel will have two holes drilled on one side; this side is the back and the holes are located at the top. The headboard brace will have two holes drilled on one side; this side is the back and the holes are located at the top. STEP 6 Place the headboard panel and headboard brace front side down on a flat, solid, protected surface. Position the headboard posts on either side of the headboard panel and brace making sure to position the side of the headboard post with the 4 holes to face the headboard panel and brace; the side of the headboard post with the two smaller holes and a wood button should be face down at this point. 2 of
3 STEP 7 There are two holes drilled on each edge of the headboard panel. Place a dowel in the lower (and slightly larger) hole on each side. There are two holes drilled on each edge of the headboard brace. Place a dowel in the lower (and slightly larger) hole on each side. STEP 8 Place a barrel nut in each of the holes on the back of the headboard panel and headboard brace so that the groove on the barrel nut is facing up and runs in the direction of the headboard panel or headboard brace. STEP 9 Line up the holes in one of the headboard posts with the holes on the edge of the headboard panel. Starting from the outside of the headboard post, thread a 4" bolt through the top hole in the headboard post so that it connects with the barrel nut in the headboard panel. Using a Phillips head screwdriver, tighten until the bolt is threaded into the barrel nut, but DO NOT tighten all the way (the use of a flat head screwdriver to hold the barrel nut in the correct position is recommended). Repeat this process for the first side of the headboard brace, making sure the dowels also line up. Line up the holes on the second headboard post and repeat this process on the other side. STEP 10 Once all the bolts are connected, go back and tighten all 4 bolts completely. Your headboard is now assembled. 3 of
4 STEP 11 Locate the two side rails, the footboard, and the headboard. STEP 12 Stand the headboard upright. STEP 13 After separating out the center leg hardware, locate the remaining 8 bolts and 8 barrel nuts. Insert the barrel nuts into the holes on the inside of the side rails with the slot in the barrel nut facing up. Turn the slot on the end of each barrel nut so that it is going the length of the rail. STEP 14 Line up the end of one rail (finished side out) with the pre-drilled holes in the headboard of the bed. The front of the headboard should be facing the rails at this point. From the back of the headboard, thread a bolt through each hole in the headboard into the corresponding hole in the side rail so that it screws into the barrel nut placed in the rail in step #13. Using a Phillips head screwdriver tighten the bolt until it is completely threaded into the barrel nut (the use of a flat head screwdriver to hold the barrel nut in the correct position is recommended). IMPORTANT: DO NOT tighten the bolts completely at this point. Repeat this process for the other rail. STEP 15 Locate the footboard of the bed. Attach the footboard to the side rails using the same method as in step #14, but note that the front of the footboard has the larger holes and will face away from the side rails. The bolts should be threaded from the front of the footboard into the corresponding holes in the side rails. Twin size skip to step #17 4 of
5 STEP 16 Attaching center support bar(s): FULL & QUEEN SIZE Locate the long support bar with the screws attached to each end. Line up the support bar so that the screws at each end fit into the notch on the metal brackets found on the inside of the frame ends. It is important that the end of the support bar with the red dot is at the head of the bed. Push down to lock into place. KING SIZE Follow Full & Queen size directions for both support bars. STEP 17 (ALL SIZES) Go back and tighten the bolts left loose in steps #14 and step #15. STEP 18 Locate the four 1¼" fluted dowels. Put one dowel into each of the pre-drilled holes located on the inside edges of the rails. Tap into place. STEP 19 Installing slats and center leg: TWIN SIZE: Unroll the webbed slat system into the frame with the webbing down. IMPORTANT: DO NOT cut or remove the webbing. The last slat on each end will fit into place on the outside of the dowels put into position in step #18. FULL, QUEEN, and KING SIZE: Unroll the webbed slat system into the frame with the webbing down. IMPORTANT: DO NOT cut or remove the webbing. Make sure the slat with the red dot is at the head of the bed (to correspond with the dot on the center support bar). Place the slat with the red dot on the outside of the dowels at the head of the bed that were put in place in step #18. Stretch out the slat system halfway until each hole in the center slat lines up with the slot in each center support bar. Locate the center support leg and place a barrel nut in the hole drilled on the side of the leg, making sure the groove on the barrel nut faces out. Stand the leg under the slot in the center support bar. Thread a bolt through the center slat, through the center support bar and into the center leg. Tighten completely. 5 of
6 STEP 20 Once all center legs are installed, finish stretching out the slat system and place the last slat on the outside of the dowel at the foot of the bed. STEP 21 Using the screws provided, screw the middle slat onto the side rails through the pre-drilled holes. STEP 22 Tap the wood buttons into place on the outside of the headboard and footboard and on the headboard posts to cover the bolt holes. CARE Use a clean soft cloth to dust. Product Support of
L.L.Bean. Wooden Slat Bed
L.L.Bean Wooden Slat Bed Thank you for purchasing our Slat Bed. Assembly of this product requires A Phillips head screwdriver. We have found it helpful to have a second person present in at least one step
More informationL.L.Bean. Farmhouse Futon
L.L.Bean Farmhouse Futon Thank you for purchasing our Farmhouse Futon. Assembly of this product requires a Phillips Head Screwdriver and Flat Head Screwdriver. We have found it helpful to have a second
More informationO-Sullivan King 4 Poster Bed O-Sullivan Queen 4 Poster Bed Parts and Hardware List
Parts and Hardware List A. Left Headboard Post 1 pc B. Right Headboard Post 1 pc C. Left Footboard Post 1 pc D. Right Footboard Post 1 pc E. Headboard Panel 1 pc F. Footboard Rail 1 pc. Spindles 4 pcs
More informationQueen Wingback Bed King Wingback Bed
Parts and Hardware List A. Side Rails with Attachment Hooks 2 pcs B. Foot Rail 1 pc C. Head Rail 1 pc D. Center Support Slat 1 pc E. Leg Supports 3 pcs F. Support Slats 4 pcs G. Flat Washers 8 pcs H. Lock
More informationRiverside. Windhaven Queen Storage Bed Assembly Instructions
Queen Storage Bed Page 1 of 7 2 pcs. 4 pcs. 4 pcs. 4 pcs. 2 pcs. 5/0 Queen Storage Bed 50773 -- 5/0 Storage Footboard w/platform Note: The 50773 Storage Footboard can be used with the 50770 Panel Headboard
More informationPRINCESS SINGLE BED WITH TRUNDLE
PRINCESS SINGLE BED WITH TRUNDLE If you have any questions regarding assembly or if you are missing parts, do not return this item to Sam s Wholesale Club Please call our customer service number and have
More informationRiverside. Oakmont Queen Storage Bed Assembly Instructions
Queen Storage Bed Page 1 of 7 8 pcs. 8 pcs. 1 pc. 1 pc. 8 pcs. 8 pcs. 8 pcs. 8 pcs. 1 pc. 1 pc. 20270 --5/0 Sleigh Headboard 20274 --5/0-6/6 Bed Rails 20273 -- 5/0 Storage Footboard, Panels, Slats Queen
More informationAll Restoration Hardware bunk beds are designed to meet the highest safety standards and comply with all U.S. and Canadian Bunk Bed regulations.
All Restoration Hardware bunk beds are designed to meet the highest safety standards and comply with all U.S. and Canadian Bunk Bed regulations. Page 1 of 13 Assembly Instructions Callum Storage Twin Bunk
More informationK-Emily Twin Nkl Canopy Bed K-Emily Twin Pink Canopy Bed K-Emily Purple Twin Canopy Bed
Parts and Hardware List A. Headboard 1 pc B. Footboard 1 pc C. Side Rails 2 pcs D. Support Slats 3 pcs E. Leg Supports 3 pcs F. Long Canopy Rails 2 pcs G. Short Canopy Rails 2 pcs H. Long Posts 2 pcs I.
More informationRiverside. Harbor Hill Queen Storage Bed Assembly Instructions
Queen Storage Bed Page 1 of 7 8 pcs. 8 pcs. 1 pc. 2 pcs. 3 pcs. 3 pcs. 4 pcs. 4 pcs. 4 pcs. 1 pc. 1 pc. 8 pcs. 8 pcs. 8 pcs. 2 pcs. 8 pcs. 1 pc. 25770 -- 4/6-5/0 Panel Headboard (NOTE: the 25775 Leather
More informationRiverside. Harbor Hill King Storage Bed Assembly Instructions
King Storage Bed Page 1 of 7 8 pcs. 8 pcs. 1 pc. 2 pcs. 6 pcs. 3 pcs. 4 pcs. 4 pcs. 4 pcs. 1 pc. 1 pc. 2 pcs. 8 pcs. 8 pcs. 8 pcs. 8 pcs. 25780 -- 6/0-6/6 Panel Headboard (NOTE: the 25785 Leather Headboard
More informationAll Restoration Hardware bunk beds are designed to meet the highest safety standards and comply with all U.S. and Canadian Bunk Bed regulations.
All Restoration Hardware bunk beds are designed to meet the highest safety standards and comply with all U.S. and Canadian Bunk Bed regulations. Page 1 of 13 Assembly Instructions Callum Storage Twin Bunk
More informationBIFOLD FUTON FRAME TRINITY ARM. Seat Rails and Slats x 1. *Note: Use 4pc of 100mm Bolts and 4pc of 60mm Bolts to attach the arms to the Stretchers.
1A Parts in this box. 2pc with extra holes 2pc with extra holes & plastic stoppers Arms x 2 Back Rails and Slats x 1 Full Size: Slat Supports x 6 3pc are longer for the Back deck Back Side Rails x 2 Seat
More informationAll Restoration Hardware bunk beds are designed to meet the highest safety standards and comply with all U.S. and Canadian Bunk Bed regulations.
baby&child RESTORATION HARDWARE All Restoration Hardware bunk beds are designed to meet the highest safety standards and comply with all U.S. and Canadian Bunk Bed regulations. Page 1 of 13 Assembly Instructions
More informationBeadboard Curved Bed Queen Size
Beadboard Curved Bed Queen Size PRE- ASSEMBLY: Remove all parts and hardware from the box, and lay them out on a carpeted or scratch-free work surface. The shipping box provides an ideal work surface,
More informationStuff-Your-Stuff Platform Bed (Twin and Full)
Stuff-Your-Stuff Platform Bed (Twin and Full) Pre-Assembly: Please read all instructions before beginning assembly. Assembly by two people is a must. Save all packing materials until assembly is complete
More informationWARNING: Failure to follow these warnings and assembly instructions could
OXFORD BUNK BED TWIN OVER TWIN & FULL OVER FULL For Bunk Bed Twin Over Twin WARNING: Failure to follow these warnings and assembly instructions could result in serious injury or death. To help prevent
More informationBLUE ANT FURNITURE TITLE: FULL BUNKBED INSTRUCTIONS 10/10/09 DWG. NO. INSTR_888-FULL-BUNK SHEET 1 OF 9
BLUE ANT FURNITURE TITLE: FULL BUNKBED INSTRUCTIONS 10/10/09 DWG. NO. INSTR_888-FULL-BUNK SHEET 1 OF 9 WARNING: Failure to follow these warnings and assembly instructions could result in serious injury.
More informationCopyright 2010, by Walker Edison Furniture Co., LLC. All rights reserved.
General Assembly Guidelines I. Insure that all parts and hardware are available before beginning assembly. II. III. IV. Follow each step carefully to insure the proper assembly of this product. Two people
More informationKEATING BED. Date: 02-Apr-15 Page 1 of 7 Rev:
KEATING E ate: 02-Apr-5 www.williams-sonoma.com Page of 7 Important Safety Instructions: Please read all instructions carefully before assembling. For your safety, assembly by two or more adults is strongly
More informationBoris toddler bed. Instruction manual. Important!
Boris toddler bed Instruction manual Important! KEEP FOR FUTURE REFERENCE 1 Thank you for purchasing this Boris toddler bed. Please read the instructions and warnings carefully before use to ensure safe
More informationMyra Bed Room King Storage Bed Assembly Instructions. Hardware and Parts packed with the Headboard. One Left & One Right H-C
email: Headboard Panel info@riverside-furniture.com King Storage Bed Hardware and Parts packed with the Headboard Headboard Post Headboard Stretcher Page 1 of 7 H-A One Left & One Right H-C M5/16"-18 x
More informationBEADBOARD LOFT BED ASSEMBLY INSTRUCTIONS
BEADBOARD LOFT BED ASSEMBLY INSTRCTIONS Date: 2013-Apr.-25 www.pbteen.com Page 1 of 10 ARNING: Failure to follow these warnings and assembly instructions could result in serious injury or death. To prevent
More informationCATALINA STEP BED ASSEMBLY INSTRUCTIONS
pottery barn kids CATALINA STEP BED ASSEMBLY INSTRUCTIONS www.potterybarnkids.com Date: 2013-Apr-26 Page 1 of 8 WARNING: Failure to follow these warnings and assembly instructions could result in serious
More informationWhalen Furniture Mfg. Inc. Factory No. 4 Page # 1
ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES If you have any questions regarding assembly or if you are missing parts, do not return this item to Sam s Wholesale
More informationBarnside Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratch
88 5516 653 Barnside Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have
More informationPlease keep for future reference. Dimensions (5') Length cm. Width - 160cm Height cm
Sheridan Ottoman bed Assembly Instructions hygena Please keep for future reference 25/942 /659 56/4268 56/9 /7268 57/499 40/422 57/202 8/8846 Dimensions (4') Length - 202.5cm Width - 0cm Height - 84.5cm
More informationGinger Twin Full Bunk Bed
N&D 0809 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14.! SAFETY WARNING Follow the information on the warnings appearing on the upper bunk end structure and on the carton. Do not remove warning label from
More informationMISSION AUDIO STAND GBU
MISSION AUDIO STAND Thank you for purchasing our Mission Audio Stand. Assembly of this product requires a Phillips screwdriver and a hammer. We have found it helpful to have a second person present in
More informationColonial Classic Bar
88 5528 991 Colonial Classic Bar IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts.
More informationCATALINA BUNK BED TWIN OVER TWIN
pottery barn kids ATALINA BUNK BED TWIN OVER TWIN ASSEMBLY INSTRUTIONS www.potterybarnkids.com Date: 2011 July-23 Page 1 of 8 WARNING: Failure to follow these warnings and assembly instructions could serious
More informationLeft Unit. G. Shelf 1 pc. Small Cam Lock 6 pcs.(+1 extra) Cam Lock Screw 2 pcs.(+1 extra) Cam Lock Screw 6 pcs.(+1 extra)
88 5180 181 Art & Craft Computer Desk (Cottage Oak) IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring
More informationCOCKPIT CORNER UNIT WARNING. Illustration 1. Read all instructions and review illustrations before installing. Tools required for assembly:
Illustration 1 Illustration 2 Right side of Illustration 3 Right brace Right brace Read all instructions and review illustrations before installing. Tools required for assembly: Phillips screwdriver Rubber
More informationExpandable Bar Cabinet CF4001
Expandable Bar Cabinet CF4001 Congratulations! You have purchased a stylish piece of Crosley Furniture. We strive to provide fine furniture products, built with quality materials and hand finished details.
More informationVINTNER WINE TOWER HARDWARE TOOLS REQUIRED COMPONENTS cam covers cams 16 - cam screws. 1 - pull small screws.
HRDWRE 16 - cams 16 - cam s 16 - cam covers 1 - pull 1 - pull bolt 40 - wood dowels 28 - small s 8 - medium s Thank you for purchasing the Vintner Wine Tower. This page lists all the contents included
More informationhttps://www.wallbedsbywilding.com/wallbed-installation-studio-series/
For Wallbed models: KING SIZE INSTRUCTION BOOKLET #C1 Watch step by step installation instructions at: https://www.wallbedsbywilding.com/wallbed-installation-studio-series/ WARNING! ALL MURPHY/WALLBED
More informationLAGUNA BUNK BED - FULL OVER FULL INSTRUCTIONS
Made in Vietnam Distributed in the U.S.A. by: Restoration Hardware Baby & Child 11640 Harrel St. Suite B Mira Loma, CA 91752 www.rhbabyandchild.com All Restoration Hardware Bunk Beds are designed to meet
More informationVince Ottoman Bed Frame
Vince Ottoman Bed Frame Assembly Instructions - Please keep for future reference 355/4845 330/7281 Dimensions Depth x Width x Height 213cm x 148cm x 111cm (Double) 223cm x 163cm x 111cm (King) Important
More informationIMPORTANT SAFETY INSTRUCTIONS
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts that may have come loose inside the carton during shipment IMPORTANT SAFETY INSTRUCTIONS:
More informationStock Code: 803/44302 King. Stock Code: 803/44303 Super King Stock Code: 803/44301
John Lewis Rouen Bed Double Stock Code: 80/440 King Stock Code: 80/440 Super King Stock Code: 80/440 Thank you for purchasing this Rouen Bed. Please read the instructions carefully before use to ensure
More informationBLYTHE BUNK BED TWIN OVER TWIN
pottery barn kids BLYTHE BUNK BED TWIN OVER TWIN www.potterybarnkids.com Date: 2014-Sept.-25 Page 1 of 11 WARNING:. Failure to follow these warnings and assembly instructions could result in serious injury
More informationShould you experience any missing or damaged parts, do not return to the store. Please contact us directly at
Congratulations! You have purchased a stylish piece of Crosley Furniture. We strive to provide fine furniture products, built with quality materials and hand finished details. Please carefully follow the
More informationAssembly Instructions COMO Double Bed
Assembly Instructions COMO Double Bed VER 1.2 WARNING NG FAILURE TO FOLLOW THESE BASIC STEPS CAN LEAD TO DAMAGE THAT IS NOT COVERED BY YOUR WARRANTY 2 Read Instructions carefully. Check no parts are missing.
More informationM. Door 1 Pc. 1 Pc. Door 1 Pc. 1 Pc. M3x20 Wood Screw (long) 8 Pcs. (+1 extra) M3x10 Wood Screw for Magnet 8 Pcs. (+1 extra)
88 5516 653 Barnside Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have
More informationAVA REGENCY BUNK BED TWIN OVER FULL
pottery barn kids AVA REGENCY BUNK BED TWIN OVER FULL www.potterybarnkids.com Date: 2016-Feb.-18 Page 1 of 14 WARNING: Failure to follow these warnings and assembly instructions could result in serious
More informationWARNING: Read all instructions before assembling this product. KEEP INSTRUCTIONS FOR FUTURE USE
MARCELINE TWIN OVER TWIN BUNK BED INSTRUCTIONS Distributed in the U.S.A by: Restoration Hardware Baby & Child 11640 Harrel St. Suite B Mira Loma, California 91752 rhbabyandchild.com Distributed in Canada
More informationTHIS PRODUCT IS NOT INTENDED FOR INSTITUTIONAL OR COMMERCIAL USE. Style #: Lot: Date:
Read all instructions before assembly and use. KEEP INSTRUCTIONS FOR FUTURE USE. ADULT ASSEMBL REQUIRED Due to the presence of small parts during assembly, keep out of reach of children until assembly
More informationEmily Bed. John Lewis PRE-ASSEMBLY PREPARATION. Mink Grey Stone
John Lewis Mink Grey Stone Emily Bed Stock code: Small ouble - 80/60, ouble - 80/60, King - 80/60 Stock code: Small ouble - 80/60, ouble - 80/60, King - 80/60 Stock code: ouble - 80/800, King - 80/800
More informationBarnwood Bunk Bed Assembly Instructions
Barnwood Bunk Bed Assembly Instructions Parts needed: 1 1 2 1 8 4 10 1 10 16 1 - Tools Needed for Assembly: Cordless Drill with Phillips Head Ratchet w/9/16 socket 9/16 Wrench T-25 Bit Headboard Footboard
More informationHomestead Bar Cabinet IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent s
88 5527 991 Homestead Bar Cabinet IMPRTANT NTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts.
More informationINSTRUCTION BOOKLET #C0 Watch step by step installation instructions at: https://www.wallbedsbywilding.com/wallbed-installation-studio-series/ WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY.
More informationFor Wallbed models: KING SIZE INSTRUCTION BOOKLET #C1 Watch step by step installation instructions at: https://www.wallbedsbywilding.com/wallbed-installation-studio-series/ WARNING! ALL MURPHY/WALLBED
More informationINSTRUCTION BOOKLET #34. For Wallbed models: KING SIZE SIERRA WITH STORAGE HEADBOARD
For Wallbed models: KING SIZE SIERRA WITH STORAGE HEADBOARD INSTRUCTION BOOKLET #34 WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY. FAILURE TO USE AND FOLLOW THESE INSTRUCTIONS DURING THE INSTALLATION
More informationAssembly Instructions
Assembly Instructions Frame Models Lotz (10000), Madison (2644), Vancouver (2710), Boston (2715), San Juan (2717), Marlowe (2719), Arlington (2722), Monticello (2730), Avalon (2750) & Tucson (2770) Tel:
More informationINSTRUCTION BOOKLET #C21. For Wallbed models: KING SIZE
For Wallbed models: KING SIZE INSTRUCTION BOOKLET #C1 WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY. FAILURE TO USE AND FOLLOW THESE INSTRUCTIONS DURING THE INSTALLATION PROCESS COULD RESULT
More informationRouen Storage Bed. John Lewis PRE-ASSEMBLY PREPARATION. Double King Size. Stock code: 803/44304 Stock code: 803/44305
John Lewis Double King Size Rouen Storage Bed Stock code: 80/4404 Stock code: 80/4405 Thank you for purchasing this Rouen Storage Bed. Please read the instructions carefully before use to ensure safe and
More informationINSTRUCTION MANUAL TWIN WOODEN DAYBED MODEL NO: UPC CODE: NOTE: Lot number: Date of purchase: / / WM6394E ESPRESSO WM6394W WHITE WM6394B BLACK
INSTRUCTION MANUAL TWIN WOODEN DAYBED MODEL NO: WM6394E ESPRESSO WM6394W WHITE WM6394B BLACK UPC CODE: 0-65857-16370-4 ESPRESSO 0-65857-16371-1 WHITE 0-65857-16890-7 BLACK NOTE: THIS INSTRUCTION BOOKLET
More informationINSTRUCTION BOOKLET #C10 Watch step by step installation instructions at: https://www.wallbedsbywilding.com/wallbed-installation-studio-series/ WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY.
More informationThanks for shopping with Improvements! Wellesley Cart with Gate Leg Desk Extension Item #504992
Thanks for shopping with Improvements! Wellesley Cart with Gate Leg Desk Extension Item #504992 To order, call 1-800-642-2112 West Chester, OH 45069 Made in China PR-1015 If you have questions regarding
More informationThis instruction manual is an in-depth look and explanation of how to assemble and install the Murphy Bed properly and efficiently.
This instruction manual is an in-depth look and explanation of how to assemble and install the Murphy Bed properly and efficiently. Don t be put off by the size of the instruction manual as the large diagrams
More informationStrata. urniture Watch our assembly videos at Denali Arms. Parts in the Arm Box: Hardware in this Box:
1A Denali Arms Watch our assembly videos at www.strataf.com/videos.html Parts in the Arm Box: Arm - Outside View Arm - Inside View 1B Hardware in this Box: (80mm) x 8 Barrel Nuts x 8 x 8 Wood Buttons x
More informationQueen Size Bed. CAUTION: You must read this before you proceed.
Queen Size Bed CAUTION: You must read this before you proceed. NOT : This Bed is NOT a TOY. Keep your child / children at bay during the assembly process. The BD is HAVY. To prevent injury to yourself
More informationPRE-ASSEMBLY PREPARATION 1/6. Please ensure instructions are read in full before attempting to assemble this product.
PRE-ASSEMBLY PREPARATION Please ensure instructions are read in full before attempting to assemble this product. Necessary Tools Please check the pack contents before attempting to assemble this product.
More informationFor assembly see instructions in carton
88 5523 943 Kitchen Island IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occurring to the parts. We have
More informationINSTRUCTION BOOKLET #C20
INSTRUCTION BOOKLET #C0 WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY. FAILURE TO USE AND FOLLOW THESE INSTRUCTIONS DURING THE INSTALLATION PROCESS COULD RESULT IN SEVERE PERSONAL INJURY TO
More informationBridgeport All Wood Assembly Instructions STOP! Please read the following important information!
Revision 6/01/2004 Bridgeport All Wood Assembly Instructions STOP! Please read the following important information! For questions on assembly or parts, DO NOT RETURN product to the store. Contact the experts
More informationCirco Kids. >> assembly instructions E. Loft Bed (incl. solid pine slats) DPCI # (White) DPCI # (Chocolate)
Circo Kids Loft Bed (incl. solid pine slats) DPCI # 242-17 - 9390 (White) DPCI # 242-17 - 9391 (Chocolate) >> assembly instructions 92346 E 1 2 Congratulations on your latest Target purchase Don't start
More informationPedestal Desk IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches
88 5549 181 Pedestal Desk IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have taken
More informationAssembly Instructions Please keep for future reference Inspire 40
Assembly Instructions Please keep for future reference Inspire 40 Version 3 : 28/07/2014 Important - Please read these instructions fully before starting assembly ALR2902 Safety and Care Advice Important
More informationMia Bed. John Lewis. Double King size PRE-ASSEMBLY PREPARATION. Stock Code: 810/84103 Stock Code: 810/84104
John Lewis Mia Bed ouble King size Stock ode: 80/80 Stock ode: 80/80 Thank you for purchasing this Mia Bed. Please read the instructions carefully before use to ensure safe and satisfactory operation of
More informationStrata. urniture. Addison Instructions. Parts in the Arm Box: Parts in the Body Box: Watch our assembly videos at
1A Watch our assembly videos at www.strataf.com/videos.html Parts in the Arm Box: Arm - Outside View Arm - Inside View Corbels x 4 1B Parts in the Body Box: Back Deck x 1 Seat Deck x 1 Back Panel x 1 with
More informationUNIT SHOULD BE INSTALLED BY 2 OR MORE PERSONS.
ASSEMBLY INSTUCTIONS ITEM NO: I07-412-WB/PEP Queen ails Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts that may come loose inside the carton
More informationSide Mount INSTRUCTION BOOKLET #C122 BED STYLE: PARK CITY
Side Mount BED STYLE: PARK CITY INSTRUCTION BOOKLET #C1 WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY. FAILURE TO USE AND FOLLOW THESE INSTRUCTIONS DURING THE INSTALLATION PROCESS COULD RESULT
More information::kitchensource.com Alt Twin Headboard IMPORTANT NOTE Carefully remove all the parts from the carton and put them individua
::kitchensource.com 88 5530 401 Twin Headboard IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to
More informationpottery barn kids MADISON CABINET HUTCH
pottery barn kids MADISON CABINET HUTCH IMPORTANT SAFETY INSTRUCTIONS: Please read all instructions carefully before assembling. For your safety, assembly by two adults is recommended. PRE-ASSEMBLY: Remove
More informationBrooklyn Change Table & Drawer Set Assembly Instructions
Brooklyn Change Table & rawer Set ssembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. B C 12 mm x20 L + R L + R x28 W Safety Strap X Wall Screw
More informationAssembling Insert NO. ITEM DESCRIPTION QTY. CALLUM 3-DRAWER TWIN/FULL STORAGE CANOPY BED. Long Bolt 5/16 x 2-1/4 20 pcs. 20 pcs.
CALLUM 3-DRAWER TWIN/FULL STORAGE CANOPY ED PARTS INCLUDED: A [1] HEADOARD PANEL [2] HEADOARD POSTS C [2] FOOTOARD POSTS D [1] LONG SIDE RAIL E [1] SIDE DRAWER FRAME F [2] SHORT SIDE RAILS G [1] STORAGE
More informationPantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or oth
88 5076 691 Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occurring to the parts. We have taken great
More informationGas Lift Bed Assembly Instructions (please retain this instruction for future reference)
Gas Lift Bed Assembly Instructions (please retain this instruction for future reference) To assemble your bed you have been supplied with 12 x 12mm button head bolts, 4 x 15 mm Philips Head Screws, 6 Philips
More informationPaddington Midsleeper
Thank you for shopping with LTC, we hope you enjoy having this product in your home. www.gltc.co.uk Paddington Midsleeper We know assembling furniture, toys or accessories is not everyone s favourite way
More informationCharlotte Dressing Table & Stool Set L4294
Thank you for shopping with GLTC, we hope you enjoy having this product in your home. We know assembling furniture, toys or accessories is not everyone s favourite way to spend their time, so we ve tried
More informationAddison Panel Beds DUET = Natural finish Assembly Instructions
Addison Panel Beds DUET = Natural finish Model # 2006DUET Addison Full Panel Bed 2010DUET Addison Queen Panel Bed 2013DUET Addison King Panel Bed 2015DUET Addison Cal-King Panel Bed IMPORTANT NOTES: For
More informationWallbeds Northwest ENDURA CABINET PLANS AND INSTRUCTIONS
Thank you for purchasing your Wall Bed from Wallbeds Northwest. If you have purchased a complete "Endura DIY Kit," then much of the work is already done for you. Please skip to assembly instructions. Note
More informationI Ledge. Groove. Safety rail holes. Groove. Slot III VII
I Ledge IV V A C Groove Safety rail holes ) To assemble McKenzie Loft, attach head board A and footboard to loft side rails. The rails C D used on upper loft have four pre-drilled holes on the side of
More informationInstruction Manual & User Guide
Toddler Bed with Drawer IMPORTANT: RETAIN FOR FUTURE REFERENCE. An IGC Dorel brand Please read this manual in its entirety before assembling the product and follow all instructions contained herein. Do
More informationConstable Oak Extension Dining Table
Constable Oak Extension Dining Table Assembly Instructions - Please keep for future reference 176/0325 Dimensions Width - 160/ 200cm Depth - 90cm Height - 75cm Important - Please read these instructions
More informationNest Storage Bed in Fabric Designed by Niels Bendtsen
General Assembly Instructions Assembly requires two people and 1 2 hours. Assemble bed as near as possible to final resting area. Identify all parts and hardware before beginning assembly. Retain packaging
More informationASSEMBLY INSTRUCTIONS. IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
WESTCOTT STORAGE BED ASSEMBLY INSTRUCTIONS. IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY. Tools Needed Helpline If you have any problems with this product or require any replacement fittings
More informationAbbeville Storage - Long Shelf Unit
Thank you for shopping with GLTC, we hope you enjoy having this product in your home. We know assembling furniture, toys or accessories is not everyone s favourite way to spend their time, so we ve tried
More informationQueen Size Bed. CAUTION: You must read this before you proceed.
Queen Size Bed CAUTION: You must read this before you proceed. NOTE : This Bed is NOT a TOY. Keep your child / children at bay during the assembly process. The BED is HEAVY. To prevent injury to yourself
More informationWILDING WALLBEDS INSTALLATION INSTRUCTION Side Mount
WILDING WALLBEDS INSTALLATION INSTRUCTION Side Mount For Wallbed models: Do-It-Yourself Insturction booklet C92 WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY. FAILURE TO USE AND FOLLOW THESE
More informationIMPORTANT:
ASSEMBLY INSTRUCTIONS FOR KARISMA TWIN & FULL SIZE BEDS AND CONVERTIBLE CRIBS FULL SIZE BED OPTION (PLEASE REFER TO ASSEMBLY INSTRUCTIONS FOR YOUR 550 CONVERTIBLE CRIBS ) 555 5532 5530 5537 IMPORTANT:
More informationStonewood Beds RGB = Rustic Glazed Brown finish Assembly Instructions Model #
Stonewood Beds RGB = Rustic Glazed Brown finish Model # 1716RGBb Stonewood Queen Storage Bed 1726RGBb Stonewood King Storage Bed 1746RGBb Stonewood Queen Bed 1749RGBb Stonewood King Bed Thank you for allowing
More informationAstrid Bed -assembly instructions
Astrid Bed -assembly instructions Headboard Assembly Bed Deck x2 Base Assembly x2 Your Astrid bed is delivered in either two or three boxes depending on whether you have ordered a bed with headboard or
More informationUser Instructions Multiline Otter Scoreboard Caddy Assembly
List of parts: User Instructions Multiline Otter Scoreboard Caddy Assembly Single Caddy Double Caddy 1 1 Base assembly with attached wheels 2 4 1 1 2 4 4 8 10 20 12 Uprights (60 or 74 aluminum extrusion)
More informationpottery barn kids GRACE XW BRIDGE Date: 2014-Sept-16 Page 1 of 10 Rev: 2015-Jan-21
pottery barn kids GRACE XW BRIDGE www.potterybarnkids.com Date: 2014-Sept-16 Page 1 of 10 Rev: 2015-an-21 Important Safety Instructions: Please read all instructions carefully before assembling this Bridge.
More informationE E. 20 pcs. Long Bolt 5/16 x 2-1/4. 20 pcs. Flat Washer 5/ pcs. Spring Washer 5/16. 4 pcs. Long Screws M8 x 30mm. 20 pcs. Short Screw M8 x 15mm
C A L L U M 6 - R A WER T W I N & FUL L S T O R A G E C A N O P Y B E I N S T R U C T I O N S PARTS INCLUE: A [1] HEABOAR PANEL B [2] HEABOAR POST C [2] FOOTBOAR POST [2] SIE RAWER FRAME E [2] SHORT SIE
More informationPLEASE CHECK ALL BOXES FOR HARDWARE BEFORE DISCARDING WARRANTY AND USER INFORMATION CAN BE FOUND AT THE END OF THESE INSTRUCTIONS
Thank you for purchasing the SleepSafe Safety Bed. With proper care, your bed will provide years of safe use. Carefully unpack all the contents of your bed and verify that all parts are included using
More informationStar Bright Chest of Drawers L3938
Thank you for shopping with GLTC, we hope you enjoy having this product in your home. We know assembling furniture, toys or accessories is not everyone s favourite way to spend their time, so we ve tried
More informationEmily Storage Bed Stock code king stone: 810/80505 Stock code king mink : 803/46405 Stock code king grey : 803/46507
John Lewis Stock code double mink : 80/46404 Stock code double stone : 80/80504 Stock code double grey : 80/46506 Emily Storage Bed Stock code king stone: 80/80505 Stock code king mink : 80/46405 Stock
More information