Vibe Buffet Assembly Instructions

Size: px

Start display at page:

Download "Vibe Buffet Assembly Instructions"

Leo Beasley
5 years ago
Views:

1 ssembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. bolt bolt locking dowel long x nut x x0 screw x8 x H I J K small screw x4 V W safety strap x screw x X Y wall anchor x wall screw x hinge shelf wedge screw allen key cover x4 plug x0 x8 x8 x x8 Hardware Supplied Phillips & lathead screwdrivers required or quicker assembly, we recommend the use of a power drill on a low-speed setting. WRNIN: ny furniture that is not anchored to a wall has the potential to tip over in certain circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake. ccordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device provided should fit most wall types, but please note that different wall materials may require different fixing devices from those supplied. washer x Wall Strap *We recommend using a lathead screwdriver to tighten all locking nuts 00% before first use. Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 00%.

2 ssembly Instructions 0 Insert x bolts () into panels [], [] and [] as shown. Tighten with a screwdriver. ttach 4x hinges () to door panels [0] and [], securing with 8x screws (). Tighten with a screwdriver.

3 ssembly Instructions 4 8 ttach panels [] and [] to panel [] with 4x dowels () and secure with 4x locking nuts () and tighten with a screwdriver. Slide panel [8] between the grooves of panels [],[] and [] to form the back of the unit, as shown.

4 ssembly Instructions ttach panel [] to the rest of the unit with 4x dowels () and secure with 4x locking nuts () and tighten with a screwdriver. Seal the holes with 4 x covers (). ttach panels [] and [] to panel [] with 4x dowels () and secure with 4x locking nuts () and tighten with a screwdriver. Seal the holes with 4 x covers (). 4

5 Jolt Wardrobe ssembly Instructions Slide panels and [] between panels [], []slide,[], smoothly [], Slide the [8] completed drawers the intogrooves the unit,ofensuring they [] and to form the back of the unit, as shown. and [] easily. ttach panel [4] to the rest of the unit with 8x dowels () and secure with 8x long screws () and tighten with a screwdriver.

6 Jolt Wardrobe ssembly Instructions K 0 NOT: If the doors are uneven or there is a gap in the middle, loosen or tighten the screw on the door hinge until they are sitting flush. 4 0 H H ttach 4x legs [] to the bottom panel [4] with x bolts (), and tighten with an llen key (K). Secure door panels [0] and [] to the main unit by attaching the other end of the 4x hinges () with x screws () as shown. Tighten with a screwdriver. Insert x shelf plugs (H) into the panels [] and [] as shown.

7 Jolt Wardrobe ssembly Instructions I J H I J I J Insert 8x shelf plugs (H) into the end cavities of the cabinet as shown. Insert the shelf panels [] and balance on top of the plugs. ttach 8x wedges (I) to the corners of the back [] as shown, and secure with 8x small screws (J). Tighten with a screwdriver.

8 Jolt Wardrobe ssembly Instructions 4 X Y V X W Y V W ttach x safety strap (V) to the top of the back side of the unit as shown using x washer () and x screw (W). Tighten with a screwdriver. Once assembled lift furniture into place, do not drag. Use a drill to create a small hole lining up with the top of the safety strap (V). asten to the wall using x washer (), x wall plug (X) and x screw (Y). nsure unit is balanced and steady before use. You re done, enjoy!

Chelsea Bedside Table Assembly Instructions

Chelsea Bedside Table Assembly Instructions ssembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. B F G H dowel x16 I J bolt x locking nut x small x10 K L M N slide rail x1 slide rail x1 P slide