L.L.Bean. Wooden Slat Bed

Size: px
Start display at page:

Download "L.L.Bean. Wooden Slat Bed"

Transcription

1 L.L.Bean Wooden Slat Bed Thank you for purchasing our Slat Bed. Assembly of this product requires A Phillips head screwdriver. We have found it helpful to have a second person present in at least one step of the assembly. 1 of

2 STEP 1 Read through these instructions thoroughly before beginning assembly. We have found this to be of great value when first assembling this product. STEP 2 Remove all parts and hardware from packing material. Wooden pieces should be placed on a non-abrasive surface (like the carton or carpet) to prevent damage to the finish. STEP 3 Identify all parts using parts list at right STEP 4 Identify and count hardware using diagram at right and the list below. PARTS A. SIDE RAIL (2) B. TOP OF HEADBOARD C. MIDDLE HEADBOARD PANEL (5 SECTION) D. BOTTOM HEADBOARD BRACE (2 ½ SECTION) E. SLATTED HEADBOARD SECTION F. HEADBOARD POSTS (2) G. FOOTBOARD H. LONG SUPPORT BAR (FULL AND QUEEN)* I. SMALL WOODEN LEG (FULL AND QUEEN)* J. WEBBED SLAT SYSTEM *King size will have 2 Hardware: 8 3 ½ Bolts 6 4 Bolts 14 Barrel Nuts 2 Screws 8 1 ¼ Wooden Dowels 1 Center Leg Hardware (3 ½ bolt & barrel nut)* *NOTE: Twin size will not use the center leg hardware, Full & Queen size will be as pictured, and King size will include 2 sets. Assembly of this product requires a Phillips head and a flat head screwdriver. We have found it helpful to have a second person present in at least one step of the assembly. STEP 5 Locate the six (6) 4 bolts and six (6) of the barrel nuts. These will be used for assembly of the headboard. STEP 6 Locate the top of the headboard (the piece with the cap) and place face down on a protected surface. There should be two holes facing up at this point. Locate post A and place on the left hand side of the top of the headboard. The 3 large holes on the side of the post should be facing out and there should be 2 holes face up at this point. STEP 7 Place a barrel nut in the hole in the top of the headboard so that the groove on the barrel nut is facing up and runs in the direction of the top of the headboard. While lifting up on the top of the headboard, thread a bolt through the top hole in the headboard post and into the top of the headboard so that it connects with the barrel nut. Tighten completely. 2 of

3 STEP 8 Locate the slatted section of the headboard. Slide into place so that the top of the headboard slides into the groove at the top of the slatted section. STEP 9 Locate the middle (5 ) headboard panel and place underneath the slatted section. The side with two holes should be face up and the holes should be located at the top (towards the top of the headboard). Place a wooden dowel into the lower of the two holes located on the edge of the middle headboard panel. While lifting up on the slatted section, slide this piece into place in the channel at the bottom of the slatted section. Keeping the piece securely in the channel, line up the wooden dowel with the hole in the post and push into place. Place a barrel nut in the hole in the middle headboard panel so that the groove on the barrel nut is facing up and runs in the direction of the panel. Thread a bolt through the headboard post and into the middle headboard panel so that it connects with the barrel nut. Tighten completely. STEP 10 Locate the bottom headboard brace (2 ½ ) and place face down. The side with two holes should be face up and the holes should be located at the top (towards the top of the headboard). Place a wooden dowel into the lower of the two holes located on the edge of the bottom headboard brace. Using the same process as in Step 9, secure the bottom headboard brace to the post. 3 of

4 STEP 11 Locate post B and place on the right hand side of the headboard. The 3 large holes on the side of the post should be facing out and there should be 2 holes face up at this point. Place wooden dowels in the lower holes on both the middle headboard panel and bottom headboard brace. Line up these holes with the corresponding holes in the headboard post and push the post in to place. Using the same process as in Steps 7, 9 and 10, secure the post to the rest of the headboard using the bolts and barrel nuts. Your headboard is now assembled. STEP 12 Locate the two side rails, the footboard, and the headboard. STEP 13 Stand the headboard upright. STEP 14 After separating out the center leg hardware, locate the remaining 8 bolts and 8 barrel nuts. Insert the barrel nuts into the holes on the inside of the side rails with the slot in the barrel nut facing up. Turn the slot on the end of each barrel nut so that it is going the length of the rail. 4 of

5 STEP 15 Line up the end of one rail (finished side out) with the pre-drilled holes in the headboard of the bed. The front of the headboard should be facing the rails at this point. From the back of the headboard, thread a bolt through each hole in the headboard into the corresponding hole in the side rail so that it screws into the barrel nut placed in the rail in step #14. Using a Phillips head screwdriver tighten the bolt until it is completely threaded into the barrel nut (the use of a flat head screwdriver to hold the barrel nut in the correct position is recommended). IMPORTANT: DO NOT tighten the bolts completely at this point. Repeat this process for the other rail. STEP 16 Locate the footboard of the bed. Attach the footboard to the side rails using the same method as in step #15, but note that the front of the footboard has the larger holes and will face away from the side rails. The bolts should be threaded from the front of the footboard into the corresponding holes in the side rails. Twin size skip to step #18 5 of

6 STEP 17 Attaching center support bar(s): FULL & QUEEN SIZE Locate the long support bar with the screws attached to each end. Line up the support bar so that the screws at each end fit into the notch on the metal brackets found on the inside of the frame ends. It is important that the end of the support bar with the red dot is at the head of the bed. Push down to lock into place. KING SIZE Follow Full & Queen size directions for both support bars. STEP 18 (ALL SIZES) Go back and tighten the bolts left loose in steps #15 and step #16. STEP 19 Locate the four 1¼ fluted wooden dowels. Put one dowel into each of the pre-drilled holes located on the inside edges of the rails. Tap into place. STEP 20 Installing slats and center leg: TWIN SIZE: Unroll the webbed slat system into the frame with the webbing down. IMPORTANT: DO NOT cut or remove the webbing. The last slat on each end will fit into place on the outside of the dowels put into position in step #19. FULL, QUEEN, and KING SIZE: Unroll the webbed slat system into the frame with the webbing down. IMPORTANT: DO NOT cut or remove the webbing. Make sure the slat with the red dot is at the head of the bed (to correspond with the dot on the center support bar). Place the slat with the red dot on the outside of the dowels at the head of the bed that were put in place in step #19. Stretch out the slat system halfway until each hole in the center slat lines up with the slot in each center support bar. Locate the center support leg and place a barrel nut in the hole drilled on the side of the leg, making sure the groove on the barrel nut faces out. Stand the leg under the slot in the center support bar. Thread a bolt through the center slat, through the center support bar and into the center leg. Tighten completely. 6 of

7 STEP 21 Once all center legs are installed, finish stretching out the slat system and place the last slat on the outside of the dowel at the foot of the bed. STEP 22 Using the screws provided, screw the middle slat onto the side rails through the pre-drilled holes. STEP 23 Tap the wood buttons into place on the outside of the headboard and footboard and on the headboard posts to cover the bolt holes. CARE Use a clean soft cloth to dust. Product Support of

L.L.Bean. Platform Bed

L.L.Bean. Platform Bed L.L.Bean Platform Bed Thank you for purchasing our Platform Bed. Assembly of this product requires a Phillips head and a flat head screwdriver. We have found it helpful to have a second person present

More information

L.L.Bean. Farmhouse Futon

L.L.Bean. Farmhouse Futon L.L.Bean Farmhouse Futon Thank you for purchasing our Farmhouse Futon. Assembly of this product requires a Phillips Head Screwdriver and Flat Head Screwdriver. We have found it helpful to have a second

More information

O-Sullivan King 4 Poster Bed O-Sullivan Queen 4 Poster Bed Parts and Hardware List

O-Sullivan King 4 Poster Bed O-Sullivan Queen 4 Poster Bed Parts and Hardware List Parts and Hardware List A. Left Headboard Post 1 pc B. Right Headboard Post 1 pc C. Left Footboard Post 1 pc D. Right Footboard Post 1 pc E. Headboard Panel 1 pc F. Footboard Rail 1 pc. Spindles 4 pcs

More information

Queen Wingback Bed King Wingback Bed

Queen Wingback Bed King Wingback Bed Parts and Hardware List A. Side Rails with Attachment Hooks 2 pcs B. Foot Rail 1 pc C. Head Rail 1 pc D. Center Support Slat 1 pc E. Leg Supports 3 pcs F. Support Slats 4 pcs G. Flat Washers 8 pcs H. Lock

More information

Riverside. Oakmont Queen Storage Bed Assembly Instructions

Riverside. Oakmont Queen Storage Bed Assembly Instructions Queen Storage Bed Page 1 of 7 8 pcs. 8 pcs. 1 pc. 1 pc. 8 pcs. 8 pcs. 8 pcs. 8 pcs. 1 pc. 1 pc. 20270 --5/0 Sleigh Headboard 20274 --5/0-6/6 Bed Rails 20273 -- 5/0 Storage Footboard, Panels, Slats Queen

More information

Riverside. Windhaven Queen Storage Bed Assembly Instructions

Riverside. Windhaven Queen Storage Bed Assembly Instructions Queen Storage Bed Page 1 of 7 2 pcs. 4 pcs. 4 pcs. 4 pcs. 2 pcs. 5/0 Queen Storage Bed 50773 -- 5/0 Storage Footboard w/platform Note: The 50773 Storage Footboard can be used with the 50770 Panel Headboard

More information

PRINCESS SINGLE BED WITH TRUNDLE

PRINCESS SINGLE BED WITH TRUNDLE PRINCESS SINGLE BED WITH TRUNDLE If you have any questions regarding assembly or if you are missing parts, do not return this item to Sam s Wholesale Club Please call our customer service number and have

More information

K-Emily Twin Nkl Canopy Bed K-Emily Twin Pink Canopy Bed K-Emily Purple Twin Canopy Bed

K-Emily Twin Nkl Canopy Bed K-Emily Twin Pink Canopy Bed K-Emily Purple Twin Canopy Bed Parts and Hardware List A. Headboard 1 pc B. Footboard 1 pc C. Side Rails 2 pcs D. Support Slats 3 pcs E. Leg Supports 3 pcs F. Long Canopy Rails 2 pcs G. Short Canopy Rails 2 pcs H. Long Posts 2 pcs I.

More information

Riverside. Harbor Hill Queen Storage Bed Assembly Instructions

Riverside. Harbor Hill Queen Storage Bed Assembly Instructions Queen Storage Bed Page 1 of 7 8 pcs. 8 pcs. 1 pc. 2 pcs. 3 pcs. 3 pcs. 4 pcs. 4 pcs. 4 pcs. 1 pc. 1 pc. 8 pcs. 8 pcs. 8 pcs. 2 pcs. 8 pcs. 1 pc. 25770 -- 4/6-5/0 Panel Headboard (NOTE: the 25775 Leather

More information

Riverside. Harbor Hill King Storage Bed Assembly Instructions

Riverside. Harbor Hill King Storage Bed Assembly Instructions King Storage Bed Page 1 of 7 8 pcs. 8 pcs. 1 pc. 2 pcs. 6 pcs. 3 pcs. 4 pcs. 4 pcs. 4 pcs. 1 pc. 1 pc. 2 pcs. 8 pcs. 8 pcs. 8 pcs. 8 pcs. 25780 -- 6/0-6/6 Panel Headboard (NOTE: the 25785 Leather Headboard

More information

BIFOLD FUTON FRAME TRINITY ARM. Seat Rails and Slats x 1. *Note: Use 4pc of 100mm Bolts and 4pc of 60mm Bolts to attach the arms to the Stretchers.

BIFOLD FUTON FRAME TRINITY ARM. Seat Rails and Slats x 1. *Note: Use 4pc of 100mm Bolts and 4pc of 60mm Bolts to attach the arms to the Stretchers. 1A Parts in this box. 2pc with extra holes 2pc with extra holes & plastic stoppers Arms x 2 Back Rails and Slats x 1 Full Size: Slat Supports x 6 3pc are longer for the Back deck Back Side Rails x 2 Seat

More information

Copyright 2010, by Walker Edison Furniture Co., LLC. All rights reserved.

Copyright 2010, by Walker Edison Furniture Co., LLC. All rights reserved. General Assembly Guidelines I. Insure that all parts and hardware are available before beginning assembly. II. III. IV. Follow each step carefully to insure the proper assembly of this product. Two people

More information

All Restoration Hardware bunk beds are designed to meet the highest safety standards and comply with all U.S. and Canadian Bunk Bed regulations.

All Restoration Hardware bunk beds are designed to meet the highest safety standards and comply with all U.S. and Canadian Bunk Bed regulations. All Restoration Hardware bunk beds are designed to meet the highest safety standards and comply with all U.S. and Canadian Bunk Bed regulations. Page 1 of 13 Assembly Instructions Callum Storage Twin Bunk

More information

Beadboard Curved Bed Queen Size

Beadboard Curved Bed Queen Size Beadboard Curved Bed Queen Size PRE- ASSEMBLY: Remove all parts and hardware from the box, and lay them out on a carpeted or scratch-free work surface. The shipping box provides an ideal work surface,

More information

Barnside Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratch

Barnside Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratch 88 5516 653 Barnside Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have

More information

Myra Bed Room King Storage Bed Assembly Instructions. Hardware and Parts packed with the Headboard. One Left & One Right H-C

Myra Bed Room King Storage Bed Assembly Instructions. Hardware and Parts packed with the Headboard. One Left & One Right H-C email: Headboard Panel info@riverside-furniture.com King Storage Bed Hardware and Parts packed with the Headboard Headboard Post Headboard Stretcher Page 1 of 7 H-A One Left & One Right H-C M5/16"-18 x

More information

All Restoration Hardware bunk beds are designed to meet the highest safety standards and comply with all U.S. and Canadian Bunk Bed regulations.

All Restoration Hardware bunk beds are designed to meet the highest safety standards and comply with all U.S. and Canadian Bunk Bed regulations. All Restoration Hardware bunk beds are designed to meet the highest safety standards and comply with all U.S. and Canadian Bunk Bed regulations. Page 1 of 13 Assembly Instructions Callum Storage Twin Bunk

More information

Colonial Classic Bar

Colonial Classic Bar 88 5528 991 Colonial Classic Bar IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts.

More information

Please keep for future reference. Dimensions (5') Length cm. Width - 160cm Height cm

Please keep for future reference. Dimensions (5') Length cm. Width - 160cm Height cm Sheridan Ottoman bed Assembly Instructions hygena Please keep for future reference 25/942 /659 56/4268 56/9 /7268 57/499 40/422 57/202 8/8846 Dimensions (4') Length - 202.5cm Width - 0cm Height - 84.5cm

More information

All Restoration Hardware bunk beds are designed to meet the highest safety standards and comply with all U.S. and Canadian Bunk Bed regulations.

All Restoration Hardware bunk beds are designed to meet the highest safety standards and comply with all U.S. and Canadian Bunk Bed regulations. baby&child RESTORATION HARDWARE All Restoration Hardware bunk beds are designed to meet the highest safety standards and comply with all U.S. and Canadian Bunk Bed regulations. Page 1 of 13 Assembly Instructions

More information

M. Door 1 Pc. 1 Pc. Door 1 Pc. 1 Pc. M3x20 Wood Screw (long) 8 Pcs. (+1 extra) M3x10 Wood Screw for Magnet 8 Pcs. (+1 extra)

M. Door 1 Pc. 1 Pc. Door 1 Pc. 1 Pc. M3x20 Wood Screw (long) 8 Pcs. (+1 extra) M3x10 Wood Screw for Magnet 8 Pcs. (+1 extra) 88 5516 653 Barnside Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have

More information

Homestead Bar Cabinet IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent s

Homestead Bar Cabinet IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent s 88 5527 991 Homestead Bar Cabinet IMPRTANT NTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts.

More information

Stuff-Your-Stuff Platform Bed (Twin and Full)

Stuff-Your-Stuff Platform Bed (Twin and Full) Stuff-Your-Stuff Platform Bed (Twin and Full) Pre-Assembly: Please read all instructions before beginning assembly. Assembly by two people is a must. Save all packing materials until assembly is complete

More information

Left Unit. G. Shelf 1 pc. Small Cam Lock 6 pcs.(+1 extra) Cam Lock Screw 2 pcs.(+1 extra) Cam Lock Screw 6 pcs.(+1 extra)

Left Unit. G. Shelf 1 pc. Small Cam Lock 6 pcs.(+1 extra) Cam Lock Screw 2 pcs.(+1 extra) Cam Lock Screw 6 pcs.(+1 extra) 88 5180 181 Art & Craft Computer Desk (Cottage Oak) IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring

More information

WARNING: Failure to follow these warnings and assembly instructions could

WARNING: Failure to follow these warnings and assembly instructions could OXFORD BUNK BED TWIN OVER TWIN & FULL OVER FULL For Bunk Bed Twin Over Twin WARNING: Failure to follow these warnings and assembly instructions could result in serious injury or death. To help prevent

More information

BLUE ANT FURNITURE TITLE: FULL BUNKBED INSTRUCTIONS 10/10/09 DWG. NO. INSTR_888-FULL-BUNK SHEET 1 OF 9

BLUE ANT FURNITURE TITLE: FULL BUNKBED INSTRUCTIONS 10/10/09 DWG. NO. INSTR_888-FULL-BUNK SHEET 1 OF 9 BLUE ANT FURNITURE TITLE: FULL BUNKBED INSTRUCTIONS 10/10/09 DWG. NO. INSTR_888-FULL-BUNK SHEET 1 OF 9 WARNING: Failure to follow these warnings and assembly instructions could result in serious injury.

More information

BEADBOARD LOFT BED ASSEMBLY INSTRUCTIONS

BEADBOARD LOFT BED ASSEMBLY INSTRUCTIONS BEADBOARD LOFT BED ASSEMBLY INSTRCTIONS Date: 2013-Apr.-25 www.pbteen.com Page 1 of 10 ARNING: Failure to follow these warnings and assembly instructions could result in serious injury or death. To prevent

More information

KEATING BED. Date: 02-Apr-15 Page 1 of 7 Rev:

KEATING BED. Date: 02-Apr-15   Page 1 of 7 Rev: KEATING E ate: 02-Apr-5 www.williams-sonoma.com Page of 7 Important Safety Instructions: Please read all instructions carefully before assembling. For your safety, assembly by two or more adults is strongly

More information

CATALINA STEP BED ASSEMBLY INSTRUCTIONS

CATALINA STEP BED ASSEMBLY INSTRUCTIONS pottery barn kids CATALINA STEP BED ASSEMBLY INSTRUCTIONS www.potterybarnkids.com Date: 2013-Apr-26 Page 1 of 8 WARNING: Failure to follow these warnings and assembly instructions could result in serious

More information

Boris toddler bed. Instruction manual. Important!

Boris toddler bed. Instruction manual. Important! Boris toddler bed Instruction manual Important! KEEP FOR FUTURE REFERENCE 1 Thank you for purchasing this Boris toddler bed. Please read the instructions and warnings carefully before use to ensure safe

More information

Pedestal Desk IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches

Pedestal Desk IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches 88 5549 181 Pedestal Desk IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have taken

More information

Strata. urniture Watch our assembly videos at Denali Arms. Parts in the Arm Box: Hardware in this Box:

Strata. urniture Watch our assembly videos at   Denali Arms. Parts in the Arm Box: Hardware in this Box: 1A Denali Arms Watch our assembly videos at www.strataf.com/videos.html Parts in the Arm Box: Arm - Outside View Arm - Inside View 1B Hardware in this Box: (80mm) x 8 Barrel Nuts x 8 x 8 Wood Buttons x

More information

Rouen Storage Bed. John Lewis PRE-ASSEMBLY PREPARATION. Double King Size. Stock code: 803/44304 Stock code: 803/44305

Rouen Storage Bed. John Lewis PRE-ASSEMBLY PREPARATION. Double King Size. Stock code: 803/44304 Stock code: 803/44305 John Lewis Double King Size Rouen Storage Bed Stock code: 80/4404 Stock code: 80/4405 Thank you for purchasing this Rouen Storage Bed. Please read the instructions carefully before use to ensure safe and

More information

Ginger Twin Full Bunk Bed

Ginger Twin Full Bunk Bed N&D 0809 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14.! SAFETY WARNING Follow the information on the warnings appearing on the upper bunk end structure and on the carton. Do not remove warning label from

More information

WARNING: Read all instructions before assembling this product. KEEP INSTRUCTIONS FOR FUTURE USE

WARNING: Read all instructions before assembling this product. KEEP INSTRUCTIONS FOR FUTURE USE MARCELINE TWIN OVER TWIN BUNK BED INSTRUCTIONS Distributed in the U.S.A by: Restoration Hardware Baby & Child 11640 Harrel St. Suite B Mira Loma, California 91752 rhbabyandchild.com Distributed in Canada

More information

Stock Code: 803/44302 King. Stock Code: 803/44303 Super King Stock Code: 803/44301

Stock Code: 803/44302 King. Stock Code: 803/44303 Super King Stock Code: 803/44301 John Lewis Rouen Bed Double Stock Code: 80/440 King Stock Code: 80/440 Super King Stock Code: 80/440 Thank you for purchasing this Rouen Bed. Please read the instructions carefully before use to ensure

More information

Vince Ottoman Bed Frame

Vince Ottoman Bed Frame Vince Ottoman Bed Frame Assembly Instructions - Please keep for future reference 355/4845 330/7281 Dimensions Depth x Width x Height 213cm x 148cm x 111cm (Double) 223cm x 163cm x 111cm (King) Important

More information

Strata. urniture. Addison Instructions. Parts in the Arm Box: Parts in the Body Box: Watch our assembly videos at

Strata. urniture. Addison Instructions. Parts in the Arm Box: Parts in the Body Box: Watch our assembly videos at 1A Watch our assembly videos at www.strataf.com/videos.html Parts in the Arm Box: Arm - Outside View Arm - Inside View Corbels x 4 1B Parts in the Body Box: Back Deck x 1 Seat Deck x 1 Back Panel x 1 with

More information

For assembly see instructions in carton

For assembly see instructions in carton 88 5523 943 Kitchen Island IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occurring to the parts. We have

More information

Emily Bed. John Lewis PRE-ASSEMBLY PREPARATION. Mink Grey Stone

Emily Bed. John Lewis PRE-ASSEMBLY PREPARATION. Mink Grey Stone John Lewis Mink Grey Stone Emily Bed Stock code: Small ouble - 80/60, ouble - 80/60, King - 80/60 Stock code: Small ouble - 80/60, ouble - 80/60, King - 80/60 Stock code: ouble - 80/800, King - 80/800

More information

Whalen Furniture Mfg. Inc. Factory No. 4 Page # 1

Whalen Furniture Mfg. Inc. Factory No. 4 Page # 1 ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES If you have any questions regarding assembly or if you are missing parts, do not return this item to Sam s Wholesale

More information

Expandable Bar Cabinet CF4001

Expandable Bar Cabinet CF4001 Expandable Bar Cabinet CF4001 Congratulations! You have purchased a stylish piece of Crosley Furniture. We strive to provide fine furniture products, built with quality materials and hand finished details.

More information

Assembly Instructions

Assembly Instructions Assembly Instructions Frame Models Lotz (10000), Madison (2644), Vancouver (2710), Boston (2715), San Juan (2717), Marlowe (2719), Arlington (2722), Monticello (2730), Avalon (2750) & Tucson (2770) Tel:

More information

CATALINA BUNK BED TWIN OVER TWIN

CATALINA BUNK BED TWIN OVER TWIN pottery barn kids ATALINA BUNK BED TWIN OVER TWIN ASSEMBLY INSTRUTIONS www.potterybarnkids.com Date: 2011 July-23 Page 1 of 8 WARNING: Failure to follow these warnings and assembly instructions could serious

More information

PRE-ASSEMBLY PREPARATION 1/6. Please ensure instructions are read in full before attempting to assemble this product.

PRE-ASSEMBLY PREPARATION 1/6. Please ensure instructions are read in full before attempting to assemble this product. PRE-ASSEMBLY PREPARATION Please ensure instructions are read in full before attempting to assemble this product. Necessary Tools Please check the pack contents before attempting to assemble this product.

More information

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts that may have come loose inside the carton during shipment IMPORTANT SAFETY INSTRUCTIONS:

More information

Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or oth

Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or oth 88 5076 691 Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occurring to the parts. We have taken great

More information

https://www.wallbedsbywilding.com/wallbed-installation-studio-series/

https://www.wallbedsbywilding.com/wallbed-installation-studio-series/ For Wallbed models: KING SIZE INSTRUCTION BOOKLET #C1 Watch step by step installation instructions at: https://www.wallbedsbywilding.com/wallbed-installation-studio-series/ WARNING! ALL MURPHY/WALLBED

More information

Should you experience any missing or damaged parts, do not return to the store. Please contact us directly at

Should you experience any missing or damaged parts, do not return to the store. Please contact us directly at Congratulations! You have purchased a stylish piece of Crosley Furniture. We strive to provide fine furniture products, built with quality materials and hand finished details. Please carefully follow the

More information

MISSION AUDIO STAND GBU

MISSION AUDIO STAND GBU MISSION AUDIO STAND Thank you for purchasing our Mission Audio Stand. Assembly of this product requires a Phillips screwdriver and a hammer. We have found it helpful to have a second person present in

More information

Nantucket Buffet

Nantucket Buffet 88 5022 611 Nantucket Buffet IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts. We

More information

Queen Size Bed. CAUTION: You must read this before you proceed.

Queen Size Bed. CAUTION: You must read this before you proceed. Queen Size Bed CAUTION: You must read this before you proceed. NOT : This Bed is NOT a TOY. Keep your child / children at bay during the assembly process. The BD is HAVY. To prevent injury to yourself

More information

This instruction manual is an in-depth look and explanation of how to assemble and install the Murphy Bed properly and efficiently.

This instruction manual is an in-depth look and explanation of how to assemble and install the Murphy Bed properly and efficiently. This instruction manual is an in-depth look and explanation of how to assemble and install the Murphy Bed properly and efficiently. Don t be put off by the size of the instruction manual as the large diagrams

More information

BLYTHE BUNK BED TWIN OVER TWIN

BLYTHE BUNK BED TWIN OVER TWIN pottery barn kids BLYTHE BUNK BED TWIN OVER TWIN www.potterybarnkids.com Date: 2014-Sept.-25 Page 1 of 11 WARNING:. Failure to follow these warnings and assembly instructions could result in serious injury

More information

Strata. urniture. Adriana Instructions. Parts in the Arm Box: Parts in the Body Box: Watch our assembly videos at

Strata. urniture. Adriana Instructions. Parts in the Arm Box: Parts in the Body Box: Watch our assembly videos at 1A Watch our assembly videos at www.strataf.com/videos Parts in the Arm Box: Arm - Outside View Arm - Inside View 1B Parts in the Body Box: Back Deck x 1 Seat Deck x 1 with the Feet attached Back Panel

More information

Mia Bed. John Lewis. Double King size PRE-ASSEMBLY PREPARATION. Stock Code: 810/84103 Stock Code: 810/84104

Mia Bed. John Lewis. Double King size PRE-ASSEMBLY PREPARATION. Stock Code: 810/84103 Stock Code: 810/84104 John Lewis Mia Bed ouble King size Stock ode: 80/80 Stock ode: 80/80 Thank you for purchasing this Mia Bed. Please read the instructions carefully before use to ensure safe and satisfactory operation of

More information

Brooklyn Change Table & Drawer Set Assembly Instructions

Brooklyn Change Table & Drawer Set Assembly Instructions Brooklyn Change Table & rawer Set ssembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. B C 12 mm x20 L + R L + R x28 W Safety Strap X Wall Screw

More information

Assembly Instructions Please keep for future reference Inspire 40

Assembly Instructions Please keep for future reference Inspire 40 Assembly Instructions Please keep for future reference Inspire 40 Version 3 : 28/07/2014 Important - Please read these instructions fully before starting assembly ALR2902 Safety and Care Advice Important

More information

Pantry IMPORTANT NOTE

Pantry IMPORTANT NOTE 88 5022 69 Pantry IPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken great

More information

AVA REGENCY BUNK BED TWIN OVER FULL

AVA REGENCY BUNK BED TWIN OVER FULL pottery barn kids AVA REGENCY BUNK BED TWIN OVER FULL www.potterybarnkids.com Date: 2016-Feb.-18 Page 1 of 14 WARNING: Failure to follow these warnings and assembly instructions could result in serious

More information

THIS PRODUCT IS NOT INTENDED FOR INSTITUTIONAL OR COMMERCIAL USE. Style #: Lot: Date:

THIS PRODUCT IS NOT INTENDED FOR INSTITUTIONAL OR COMMERCIAL USE. Style #: Lot: Date: Read all instructions before assembly and use. KEEP INSTRUCTIONS FOR FUTURE USE. ADULT ASSEMBL REQUIRED Due to the presence of small parts during assembly, keep out of reach of children until assembly

More information

Constable Oak Extension Dining Table

Constable Oak Extension Dining Table Constable Oak Extension Dining Table Assembly Instructions - Please keep for future reference 176/0325 Dimensions Width - 160/ 200cm Depth - 90cm Height - 75cm Important - Please read these instructions

More information

VINTNER WINE TOWER HARDWARE TOOLS REQUIRED COMPONENTS cam covers cams 16 - cam screws. 1 - pull small screws.

VINTNER WINE TOWER HARDWARE TOOLS REQUIRED COMPONENTS cam covers cams 16 - cam screws. 1 - pull small screws. HRDWRE 16 - cams 16 - cam s 16 - cam covers 1 - pull 1 - pull bolt 40 - wood dowels 28 - small s 8 - medium s Thank you for purchasing the Vintner Wine Tower. This page lists all the contents included

More information

COCKPIT CORNER UNIT WARNING. Illustration 1. Read all instructions and review illustrations before installing. Tools required for assembly:

COCKPIT CORNER UNIT WARNING. Illustration 1. Read all instructions and review illustrations before installing. Tools required for assembly: Illustration 1 Illustration 2 Right side of Illustration 3 Right brace Right brace Read all instructions and review illustrations before installing. Tools required for assembly: Phillips screwdriver Rubber

More information

Strata. urniture. Mission Rim Instructions. Parts in the Arm Box: Parts in the Body Box:

Strata. urniture. Mission Rim Instructions. Parts in the Arm Box: Parts in the Body Box: 1A Watch our assembly videos at www.strataf.com/videos.html Parts in the Arm Box: Arm - Outside View Arm - Inside View Corbels x 4 1B Parts in the Body Box: Back Deck x 1 Seat Deck x 1 with the Feet attached

More information

Circo Kids. >> assembly instructions E. Loft Bed (incl. solid pine slats) DPCI # (White) DPCI # (Chocolate)

Circo Kids. >> assembly instructions E. Loft Bed (incl. solid pine slats) DPCI # (White) DPCI # (Chocolate) Circo Kids Loft Bed (incl. solid pine slats) DPCI # 242-17 - 9390 (White) DPCI # 242-17 - 9391 (Chocolate) >> assembly instructions 92346 E 1 2 Congratulations on your latest Target purchase Don't start

More information

INSTRUCTION BOOKLET #C0 Watch step by step installation instructions at: https://www.wallbedsbywilding.com/wallbed-installation-studio-series/ WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY.

More information

IMPORTANT:

IMPORTANT: ASSEMBLY INSTRUCTIONS FOR KARISMA TWIN & FULL SIZE BEDS AND CONVERTIBLE CRIBS FULL SIZE BED OPTION (PLEASE REFER TO ASSEMBLY INSTRUCTIONS FOR YOUR 550 CONVERTIBLE CRIBS ) 555 5532 5530 5537 IMPORTANT:

More information

For Wallbed models: KING SIZE INSTRUCTION BOOKLET #C1 Watch step by step installation instructions at: https://www.wallbedsbywilding.com/wallbed-installation-studio-series/ WARNING! ALL MURPHY/WALLBED

More information

ASSEMBLY INSTRUCTIONS. IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.

ASSEMBLY INSTRUCTIONS. IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY. WESTCOTT STORAGE BED ASSEMBLY INSTRUCTIONS. IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY. Tools Needed Helpline If you have any problems with this product or require any replacement fittings

More information

INSTRUCTION MANUAL TWIN WOODEN DAYBED MODEL NO: UPC CODE: NOTE: Lot number: Date of purchase: / / WM6394E ESPRESSO WM6394W WHITE WM6394B BLACK

INSTRUCTION MANUAL TWIN WOODEN DAYBED MODEL NO: UPC CODE: NOTE: Lot number: Date of purchase: / / WM6394E ESPRESSO WM6394W WHITE WM6394B BLACK INSTRUCTION MANUAL TWIN WOODEN DAYBED MODEL NO: WM6394E ESPRESSO WM6394W WHITE WM6394B BLACK UPC CODE: 0-65857-16370-4 ESPRESSO 0-65857-16371-1 WHITE 0-65857-16890-7 BLACK NOTE: THIS INSTRUCTION BOOKLET

More information

INSTRUCTION BOOKLET #34. For Wallbed models: KING SIZE SIERRA WITH STORAGE HEADBOARD

INSTRUCTION BOOKLET #34. For Wallbed models: KING SIZE SIERRA WITH STORAGE HEADBOARD For Wallbed models: KING SIZE SIERRA WITH STORAGE HEADBOARD INSTRUCTION BOOKLET #34 WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY. FAILURE TO USE AND FOLLOW THESE INSTRUCTIONS DURING THE INSTALLATION

More information

User Instructions Multiline Otter Scoreboard Caddy Assembly

User Instructions Multiline Otter Scoreboard Caddy Assembly List of parts: User Instructions Multiline Otter Scoreboard Caddy Assembly Single Caddy Double Caddy 1 1 Base assembly with attached wheels 2 4 1 1 2 4 4 8 10 20 12 Uprights (60 or 74 aluminum extrusion)

More information

INSTRUCTION BOOKLET #C21. For Wallbed models: KING SIZE

INSTRUCTION BOOKLET #C21. For Wallbed models: KING SIZE For Wallbed models: KING SIZE INSTRUCTION BOOKLET #C1 WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY. FAILURE TO USE AND FOLLOW THESE INSTRUCTIONS DURING THE INSTALLATION PROCESS COULD RESULT

More information

INSTRUCTION BOOKLET #C10 Watch step by step installation instructions at: https://www.wallbedsbywilding.com/wallbed-installation-studio-series/ WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY.

More information

Queen Size Bed. CAUTION: You must read this before you proceed.

Queen Size Bed. CAUTION: You must read this before you proceed. Queen Size Bed CAUTION: You must read this before you proceed. NOTE : This Bed is NOT a TOY. Keep your child / children at bay during the assembly process. The BED is HEAVY. To prevent injury to yourself

More information

Bridgeport All Wood Assembly Instructions STOP! Please read the following important information!

Bridgeport All Wood Assembly Instructions STOP! Please read the following important information! Revision 6/01/2004 Bridgeport All Wood Assembly Instructions STOP! Please read the following important information! For questions on assembly or parts, DO NOT RETURN product to the store. Contact the experts

More information

Assembly Instructions COMO Double Bed

Assembly Instructions COMO Double Bed Assembly Instructions COMO Double Bed VER 1.2 WARNING NG FAILURE TO FOLLOW THESE BASIC STEPS CAN LEAD TO DAMAGE THAT IS NOT COVERED BY YOUR WARRANTY 2 Read Instructions carefully. Check no parts are missing.

More information

A. Top Unit 1 Pc. For assembly see instructions in carton:

A. Top Unit 1 Pc. For assembly see instructions in carton: 88 5005 9441 Kitchen Island IMPRTANT NTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have taken

More information

PLEASE CHECK ALL BOXES FOR HARDWARE BEFORE DISCARDING WARRANTY AND USER INFORMATION CAN BE FOUND AT THE END OF THESE INSTRUCTIONS

PLEASE CHECK ALL BOXES FOR HARDWARE BEFORE DISCARDING WARRANTY AND USER INFORMATION CAN BE FOUND AT THE END OF THESE INSTRUCTIONS Thank you for purchasing the SleepSafe Safety Bed. With proper care, your bed will provide years of safe use. Carefully unpack all the contents of your bed and verify that all parts are included using

More information

Emily Storage Bed Stock code king stone: 810/80505 Stock code king mink : 803/46405 Stock code king grey : 803/46507

Emily Storage Bed Stock code king stone: 810/80505 Stock code king mink : 803/46405 Stock code king grey : 803/46507 John Lewis Stock code double mink : 80/46404 Stock code double stone : 80/80504 Stock code double grey : 80/46506 Emily Storage Bed Stock code king stone: 80/80505 Stock code king mink : 80/46405 Stock

More information

Gas Lift Bed Assembly Instructions (please retain this instruction for future reference)

Gas Lift Bed Assembly Instructions (please retain this instruction for future reference) Gas Lift Bed Assembly Instructions (please retain this instruction for future reference) To assemble your bed you have been supplied with 12 x 12mm button head bolts, 4 x 15 mm Philips Head Screws, 6 Philips

More information

INSTRUCTION BOOKLET #C20

INSTRUCTION BOOKLET #C20 INSTRUCTION BOOKLET #C0 WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY. FAILURE TO USE AND FOLLOW THESE INSTRUCTIONS DURING THE INSTALLATION PROCESS COULD RESULT IN SEVERE PERSONAL INJURY TO

More information

Barnwood Bunk Bed Assembly Instructions

Barnwood Bunk Bed Assembly Instructions Barnwood Bunk Bed Assembly Instructions Parts needed: 1 1 2 1 8 4 10 1 10 16 1 - Tools Needed for Assembly: Cordless Drill with Phillips Head Ratchet w/9/16 socket 9/16 Wrench T-25 Bit Headboard Footboard

More information

PLEASE CHECK ALL BOXES FOR HARDWARE BEFORE DISCARDING WARRANTY AND USER INFORMATION CAN BE FOUND AT THE END OF THESE INSTRUCTIONS

PLEASE CHECK ALL BOXES FOR HARDWARE BEFORE DISCARDING WARRANTY AND USER INFORMATION CAN BE FOUND AT THE END OF THESE INSTRUCTIONS Thank you for purchasing the SleepSafe Safety Bed. With proper care, your bed will provide years of safe use. Carefully unpack all the contents of your bed and verify that all parts are included using

More information

Nest Storage Bed in Fabric Designed by Niels Bendtsen

Nest Storage Bed in Fabric Designed by Niels Bendtsen General Assembly Instructions Assembly requires two people and 1 2 hours. Assemble bed as near as possible to final resting area. Identify all parts and hardware before beginning assembly. Retain packaging

More information

LAGUNA BUNK BED - FULL OVER FULL INSTRUCTIONS

LAGUNA BUNK BED - FULL OVER FULL INSTRUCTIONS Made in Vietnam Distributed in the U.S.A. by: Restoration Hardware Baby & Child 11640 Harrel St. Suite B Mira Loma, CA 91752 www.rhbabyandchild.com All Restoration Hardware Bunk Beds are designed to meet

More information

Side Mount INSTRUCTION BOOKLET #C122 BED STYLE: PARK CITY

Side Mount INSTRUCTION BOOKLET #C122 BED STYLE: PARK CITY Side Mount BED STYLE: PARK CITY INSTRUCTION BOOKLET #C1 WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY. FAILURE TO USE AND FOLLOW THESE INSTRUCTIONS DURING THE INSTALLATION PROCESS COULD RESULT

More information

pottery barn kids MADISON CABINET HUTCH

pottery barn kids MADISON CABINET HUTCH pottery barn kids MADISON CABINET HUTCH IMPORTANT SAFETY INSTRUCTIONS: Please read all instructions carefully before assembling. For your safety, assembly by two adults is recommended. PRE-ASSEMBLY: Remove

More information

Addison Panel Beds DUET = Natural finish Assembly Instructions

Addison Panel Beds DUET = Natural finish Assembly Instructions Addison Panel Beds DUET = Natural finish Model # 2006DUET Addison Full Panel Bed 2010DUET Addison Queen Panel Bed 2013DUET Addison King Panel Bed 2015DUET Addison Cal-King Panel Bed IMPORTANT NOTES: For

More information

Jesse Entertainment Unit Assembly Instructions

Jesse Entertainment Unit Assembly Instructions esse ntertainment Unit ssembly nstructions Thank you for your purchase. Please follow the instructions below for correct assembly. bolt x32 dowel x16 D F small screw x16 L + R L + R locking nut x32 cam

More information

Assembling Insert NO. ITEM DESCRIPTION QTY. CALLUM 3-DRAWER TWIN/FULL STORAGE CANOPY BED. Long Bolt 5/16 x 2-1/4 20 pcs. 20 pcs.

Assembling Insert NO. ITEM DESCRIPTION QTY. CALLUM 3-DRAWER TWIN/FULL STORAGE CANOPY BED. Long Bolt 5/16 x 2-1/4 20 pcs. 20 pcs. CALLUM 3-DRAWER TWIN/FULL STORAGE CANOPY ED PARTS INCLUDED: A [1] HEADOARD PANEL [2] HEADOARD POSTS C [2] FOOTOARD POSTS D [1] LONG SIDE RAIL E [1] SIDE DRAWER FRAME F [2] SHORT SIDE RAILS G [1] STORAGE

More information

Arts & Crafts Dining Buffet IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prev

Arts & Crafts Dining Buffet IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prev 88 580 69 Arts & Crafts Dining Buffet IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood

More information

Thanks for shopping with Improvements! Wellesley Cart with Gate Leg Desk Extension Item #504992

Thanks for shopping with Improvements! Wellesley Cart with Gate Leg Desk Extension Item #504992 Thanks for shopping with Improvements! Wellesley Cart with Gate Leg Desk Extension Item #504992 To order, call 1-800-642-2112 West Chester, OH 45069 Made in China PR-1015 If you have questions regarding

More information

D. Middle Panel. C. Middle Panel. 1 pc. B. Side Panel 1 pc. I. Back Stretcher. 1 pc. J. Front Stretcher. 1 pc. S. Door 1 pc. T.

D. Middle Panel. C. Middle Panel. 1 pc. B. Side Panel 1 pc. I. Back Stretcher. 1 pc. J. Front Stretcher. 1 pc. S. Door 1 pc. T. itchen Cart IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken great care

More information

Charlotte Dressing Table & Stool Set L4294

Charlotte Dressing Table & Stool Set L4294 Thank you for shopping with GLTC, we hope you enjoy having this product in your home. We know assembling furniture, toys or accessories is not everyone s favourite way to spend their time, so we ve tried

More information

Instruction Manual & User Guide

Instruction Manual & User Guide Toddler Bed with Drawer IMPORTANT: RETAIN FOR FUTURE REFERENCE. An IGC Dorel brand Please read this manual in its entirety before assembling the product and follow all instructions contained herein. Do

More information

Paddington Midsleeper

Paddington Midsleeper Thank you for shopping with LTC, we hope you enjoy having this product in your home. www.gltc.co.uk Paddington Midsleeper We know assembling furniture, toys or accessories is not everyone s favourite way

More information

Product Information. Brass & Cast Bedsteads

Product Information. Brass & Cast Bedsteads Product Information Brass & Cast Bedsteads parts CheCk list 4 0,4 6,5 0,6 0 slatted FraMe 01 headend 1 02 Footend 1 03 head end extension legs 2 04 side rails 2 05 end cross bar 2 06 Center cross bar 1

More information

IDR assembly instructions:

IDR assembly instructions: IDR assembly instructions: Required Tools: 2 X 12mm Open End Wrench 14mm open end wrench #2 Phillips Head Screw Driver (Drill with adjustable torque clutch recommended) 8mm nut driver (Supplied in IDR-AK)

More information