Thanks for shopping with Improvements! Providence Magazine End Table Item #547337

Transcription

1 Thanks for shopping with Improvements! Providence Magazine End Table Item # Note: This table can be assembled: with the Door pivoting from the right side or the left side (instructions show pivot on the left side). with the Magazine ins on the right side or left side (instructions show ins on the right side). To order, call West hester, OH Made in hina PR-1017 If you have questions regarding this product, call Mon.-Fri. 9:00-5:00 EST (Ohio) and ask for our product specialists, or See many more products on the Internet! Providence Magazine End Table # urrent instructions at Page 1 of 10

2 Parts List:. Top Qty: 1. Plain Side Qty: 1. Magazine Side Qty: 1 12 holes on this side D. Drawer ox Qty: 1 E. ase Qty: 1 F. Door Qty: 1 G. djustable Shelf Qty: 1 H. Magazine in Qty: 2 I. ack Qty: 1 Note: Read these instructions carefully before assembling. Tools required: Phillips screwdriver, flat screwdriver. Find a clean, smooth area on which to work, such as a carpet, in order to avoid scratching the wood surfaces. Wait to dispose of the packing material until assembly is complete and all parts and hardware are accounted for. Two people might be required for assembly. ssembly Tips Find a clean, smooth area on which to work, such as a carpet, in order to avoid scratching the parts. Lay out all parts and hardware on the floor or on a table in the order of their number or letter. This will familiarize you with the parts and also help you find a part when you re ready to assemble it. Usually there is a small sticker on the part with the designating letter or number that matches the letter or number in the instructions. If that sticker is missing, look at the drawing in the instruction parts list, and try to recognize the part by its shape or characteristics like holes or grooves. We have provided both text and a drawing in each step, so using both will help the most. Each step assembles only a few parts, so just take it one step at a time. Providence Magazine End Table # urrent instructions at Page 2 of 10

3 Hardware List: 1. am olt Qty: am Lock Qty: Dowel Qty: 4 4. Dowel Qty: 8 5. Round-Head Screw (½ long) Qty: Magnet Qty: 1 7. Metal Plate Qty: 2 8. Metal Plate Screw (½ long) Qty: 2 9. Handle Qty: Machine Screw ( 3 / 4 long) Qty: Hex Socket Screw ( 3 / 4 long) Qty: Shelf Pin Qty: Hex Wrench Qty: Stop Pin Qty: Knob Qty: 1 To use am Locks 1. Insert am olt until snug 2. Set boards together 3. Insert am Lock 4. Turn am Lock clockwise (half a turn) Do not overtighten Note arrow direction If it won t turn halfway, back out the am olt ½ turn and try am Lock again. Providence Magazine End Table # urrent instructions at Page 3 of 10

4 To assemble: Step 1 Pull the drawer and the tray out of the Drawer ox (bend the plastic drawer stop to release the Drawer). ttach the Knob (15) to the Tray. Use the Machine Screws (10) to attach Handle (9) to the Drawer Step 2 Use Machine Screws (10) and Dowels (4) to attach the Magazine ins (H) to Magazine Side (). 4 H 10 H Providence Magazine End Table # urrent instructions at Page 4 of 10

5 Step 3 Place the Top upside down on a soft, clean surface. Insert eight am olts (1) in the holes of the Top (). Step 4 Insert two Dowels in the holes of the Top. Use am Locks (2) to secure the Top to the Sides. 2 3 Providence Magazine End Table # urrent instructions at Page 5 of 10

6 Step 5 Place the ox over the four remaining am olts in the Top. Use four am Locks (2) to secure the ox to the Top. D 2 Step 6 Use two Hex Socket Screws (11) to secure the ox to the Sides Providence Magazine End Table # urrent instructions at Page 6 of 10

7 Step 7 Use eight Round-Head Screws (5) to attach the ack (I) to the Sides. 5 I Step 8 Insert four am olts (1) and two Dowels (3) in the holes of the ase (E). Use am Locks (2) to secure the ase (E) to the Sides. Turn the unit over. E Providence Magazine End Table # urrent instructions at Page 7 of 10

8 Step 9 Decide if you would like the Door to pivot on the left side or the right side. Place the lower pivot pin in the hole in the ase. Press in the upper pivot pin and line it up with the hole in the Top. It must pop into the hole. Use the Metal Plate Screw (8) to secure the Metal Plate (7) to the inside of the Door near the top. Use Round-Head Screws (5) to attach the Magnet (6) to the bottom of the ox (D). Use two Machine Screws (10) to attach the Handle (9) to the Door (F). If the Door pivots on the right side, Magnetic Plate would attach here Step 10 Insert the Shelf Pins (12) in the holes at the desired levels. Set the Shelf (G) on the Pins. 12 G Providence Magazine End Table # urrent instructions at Page 8 of 10

9 Step 11 Insert the tray in the unit, open the Door, and insert the Stop Pin in the hole at the bottom of the tray. 14 Step 12 Insert the drawer in the assembled unit. Providence Magazine End Table # urrent instructions at Page 9 of 10