Closet Wall Drawer Unit
|
|
- Reynard Doyle
- 5 years ago
- Views:
Transcription
1 Closet Wall Drawer Unit A. B. C. Shelf D. E. F. For assembly see instructions in carton
2 Closet Wall Drawer Unit G. H. I. Plinth M. Bottom L. N. 2 pc. J. K. O. Drawer Refer to the last page(s) of these Instructions for drawer assembly. Plug 4 pcs. (+1 extra) M3x15 8 pcs. (+1 extra) Adjustable Pin 12 pcs. (+1 extra) M4x15 Machine Screw 4 pcs. Hex Wrench M3x19 16 pcs. (+1 extra) M3x25 (long) 10 pcs. (+1 extra) Knob 2 pcs. Carton is also needed for assembly. Tool(s) required for assembly: Phillips screwdriver, Level, Drill (8 volts or less), 3/8 Drill Bit
3 Assembly Instructions 6/8 IMPORTANT To help reduce the risk of the unit tipping over, the Tipover Restraint must be installed following these instructions exactly. STEP 9 Drill a 3/8 hole in wall in-line with the pre-drilled hole. Anchor in wall 3/8 wall hole on wall Wall Screw Pre-drilled hole Move unit. Insert Anchor into the wall hole and attach with Wall Screw. Tie end Attach at pre-drilled hole with. Lock end at top of unit Move unit back into place. If assembling multiple Closet Wall Units together, go to and complete Step 10 now, then return to and complete Step 9. Tipover Restraint Slide Tipover Restraint through on wall and on unit. (See Figure 5) Figure 5 Put tie end of Tipover Restraint into lock end of Tipover Restraint and pull until tight. Drill 3/8 hole in wall of unit Pre-drilled hole Anchor (+1 extra) 2 pcs. (+1 extra) Tipover Restraint (+1 extra) M3.5x40 Wall Screw (+1 extra) M3.5x16 (+1 extra)
4 Assembly Instructions 8/8 Drawer (O) O4 STEP 1 O2 O3 Attach O2 to O3 and O4, then flip the locks. (See Figure A) O5 O2 Figure 2 STEP 2 O1 Slide O5 into the grooves in O3 and O4. Be sure to push O5 all the way forward so it meets O2. STEP 3 Attach O1 to unit, then flip the locks. STEP 4 Attach Knob with machine screw. O1. Drawer Front O2. Drawer Back O3. Drawer Side O4. Drawer Side O5. Drawer Bottom
5 Closet Wall Shelf Unit A. B. C. Shelf D. E. F. For assembly see instructions in carton
6 Closet Wall Shelf Unit H. I. Plinth G. M. Bottom J. K. L. C. Shelf Plug 4 pcs. (+1 extra) M3x15 8 pcs. (+1 extra) Adjustable Pin 24 pcs. (+1 extra) 4 pcs. Hex Wrench M3x19 16 pcs. (+1 extra) M3x25 (long) 6 pcs. (+1 extra) 2 pcs. Carton is also needed for assembly. Tool(s) required for assembly: Phillips screwdriver, Level, Drill (8 volts or less), 3/8 Drill Bit
7 Assembly Instructions 6/7 IMPORTANT To help reduce the risk of the unit tipping over, the Tipover Restraint must be installed following these instructions exactly. STEP 9 Drill a 3/8 hole in wall in-line with the pre-drilled hole. Anchor in wall 3/8 wall hole on wall Wall Screw Pre-drilled hole Move unit. Insert Anchor into the wall hole and attach with Wall Screw. Tie end Attach at pre-drilled hole with. Lock end at top of unit Move unit back into place. If assembling multiple Closet Wall Units together, go to and complete Step 10 now, then return to and complete Step 9. Tipover Restraint Slide Tipover Restraint through on wall and on unit. (See Figure 5) Figure 5 Put tie end of Tipover Restraint into lock end of Tipover Restraint and pull until tight. Drill 3/8 hole in wall of unit Pre-drilled hole Anchor (+1 extra) 2 pcs. (+1 extra) Tipover Restraint (+1 extra) M3.5x40 Wall Screw (+1 extra) M3.5x16 (+1 extra)
8 Closet Wall Hanging Unit A. B. C. D. E. F. For assembly see instructions in carton
9 Closet Wall Hanging Unit G. H. I. Rod 2 pcs. J. Plinth K. L. M. N. O. Bottom Plug 4 pcs. (+1 extra) M3x15 8 pcs. (+1 extra) M3.5x16 Rod Support 8 pcs. (+1 extra) 4 pcs. Hex Wrench M3x19 16 pcs. (+1 extra) M3x25 (long) 7 pcs. (+1 extra) Rod Support 4 pcs. 2 pcs. Carton is also needed for assembly. Tool(s) required for assembly: Phillips screwdriver, Level, Drill (8 volts or less), 3/8 Drill Bit
10 Assembly Instructions 7/8 IMPORTANT To help reduce the risk of the unit tipping over, the Tipover Restraint must be installed following these instructions exactly. STEP 10 Drill a 3/8 hole in wall in-line with the pre-drilled hole. Anchor in wall 3/8 wall hole on wall Wall Screw Pre-drilled hole Move unit. Insert Anchor into the wall hole and attach with Wall Screw. Tie end Attach at pre-drilled hole with. Lock end at top of unit Move unit back into place. If assembling multiple Closet Wall Units together, go to and complete Step 11 now, then return to and complete Step 10. Tipover Restraint Slide Tipover Restraint through on wall and on unit. (See Figure 7) Figure 7 Put tie end of Tipover Restraint into lock end of Tipover Restraint and pull until tight. Drill 3/8 hole in wall of unit Pre-drilled hole Anchor (+1 extra) 2 pcs. (+1 extra) Tipover Restraint (+1 extra) M3.5x40 Wall Screw (+1 extra) M3.5x16 (+1 extra)
Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or oth
88 5076 691 Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occurring to the parts. We have taken great
More informationCloset Wall Drawer Unit
IMPORTANT 88 5531 752 Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions
More informationIMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damag
IMPORTANT 20 05520 0772 Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions
More informationCloset Wall Hanging Unit
IMPORTANT 88 5531 772 Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions
More informationCloset Wall Shelf Unit
IMPORTANT 88 5530 762 arefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. arefully and strictly follow these assembly instructions
More informationBarnside Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratch
88 5516 653 Barnside Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have
More informationHomestead Bar Cabinet IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent s
88 5527 991 Homestead Bar Cabinet IMPRTANT NTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts.
More informationJ. Base 1 pc. 1 pc. P. Shelf 2 pcs. Gate Leg. 1 pc. Head Cap Bolt 13 pcs. (+1 extra) Cam Lock Screw. Cam Lock. 20 pcs. (+1 extra)
88 5023 95C Kitchen Island with Breakfast Bar IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the
More informationColonial Classic Bar
88 5528 991 Colonial Classic Bar IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts.
More informationM. Door 1 Pc. 1 Pc. Door 1 Pc. 1 Pc. M3x20 Wood Screw (long) 8 Pcs. (+1 extra) M3x10 Wood Screw for Magnet 8 Pcs. (+1 extra)
88 5516 653 Barnside Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have
More informationPedestal Desk IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches
88 5549 181 Pedestal Desk IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have taken
More informationD. Middle Panel. C. Middle Panel. 1 pc. B. Side Panel 1 pc. I. Back Stretcher. 1 pc. J. Front Stretcher. 1 pc. S. Door 1 pc. T.
itchen Cart IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken great care
More informationJ. Shelf 4 pcs. L. Door. K. Door. 1 pc. Magnet. 2 pcs. Adjustable Pin. 16 pcs. (+1 extra)
88 5523 61 Buffet IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly
More informationC. Side Panel 1 pc. B. Side Panel. 1 pc. J2. Shelf. 4 pcs. Adjustable Pin 24 pcs. (+1 extra) M3.5x16 Wood Screw 20 pcs. (+1 extra) 2 pcs.
IMPORTANT 20 05180 0307 Hutch Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly
More informationArts & Crafts Dining Buffet IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prev
88 580 69 Arts & Crafts Dining Buffet IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood
More informationC Cuisine Cart IMPORTANT NOTE
88 9001 001C Cuisine Cart IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken
More informationC PART LIST HARDWARE LIST. Kitchen Cart IMPORTANT NOTE
88 9200 006C Kitchen Cart IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken
More informationFor assembly see instructions in carton
88 5523 943 Kitchen Island IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occurring to the parts. We have
More informationKitchen Island IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches o
88 5170 943 Kitchen Island IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these
More informationNantucket Buffet
88 5022 611 Nantucket Buffet IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts. We
More informationLeft Unit. G. Shelf 1 pc. Small Cam Lock 6 pcs.(+1 extra) Cam Lock Screw 2 pcs.(+1 extra) Cam Lock Screw 6 pcs.(+1 extra)
88 5180 181 Art & Craft Computer Desk (Cottage Oak) IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring
More informationA. Top Unit 1 Pc. For assembly see instructions in carton:
88 5005 9441 Kitchen Island IMPRTANT NTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have taken
More informationPantry IMPORTANT NOTE
88 5022 69 Pantry IPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken great
More informationB. Side Panel. E. Middle Panel 1 pc. 1 pc. 1 pc. S. Side Rack. 1 pc. T. Base Rack. U. Pipe 3 pcs. M6x35 Head Cap Bolt 14 pcs.
IMPORTANT 88 5089 95C Kitchen Cart Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly
More informationBuffet with Doors and Drawers
88 5100 002 Buffet with s and s IMPORAN NO Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have
More informationStorage Island. M3x25 Wood Screw for Side Panels 4 pcs. (+1 extra) Adjustable Pin 12 pcs. (+1 extra)
IMPORTANT 88 5531 923 Storage Island Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these
More informationPedestal Desk. D. Side Panel 1 pc. E. Side Panel. I. Back Panel. 2 pcs.
IMPORTANT 88 5530 182 Pedestal Desk Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these
More informationC PART LIST HARDWARE LIST. Tools Required For Assembly : Philips screwdriver. Thai Patent Pending Numbers
88508695 Stainless Steel Top Kitchen art with Wood reakfast ar Thank you for purchasing our quality products. Please carefully check the quantity of the parts and hardware. Please also read this assembly
More informationIMPORTANT NOTE Do not tighten up all the screws until each part is properly assembled. You should keep Hex Wrench in the safe place as you may need to
88509995 C Kitchen Center Dear Our Valuable Customers, Please follow our assembly instructions in every step, we guarantee that you will get the perfect merchandise. Thank you so much for purchasing our
More informationStuff-Your-Stuff Platform Bed (Twin and Full)
Stuff-Your-Stuff Platform Bed (Twin and Full) Pre-Assembly: Please read all instructions before beginning assembly. Assembly by two people is a must. Save all packing materials until assembly is complete
More informationThanks for shopping with Improvements! Chapin Secretary Desk Item #398643
Thanks for shopping with Improvements! Chapin Secretary Desk Item #398643 Note: You will receive this desk in two boxes. To order, call 1-800-642-2112 West Chester, OH 45069 Made in China 1111 If you have
More informationItem # Thanks for shopping with Improvements!
Thanks for shopping with Improvements! Hampshire -Door Cabinet Item #5505 To order, call -800-64- West Chester, OH 45069 Made in China PR-6 If you have questions regarding this product, call -800-64- Mon.-Fri.
More informationTIP FOR GETTING STARTED
Tip for getting started TIP FOR GETTING STARTED Be careful not to drill into any electrical wires, ductwork, plumbing or other damagable components. If you have any questions on the locations of these
More informationThanks for shopping with Improvements! Mandarin Tansu Step Cabinet Item #512735
Thanks for shopping with Improvements! Mandarin Tansu Step Cabinet Item #512735 This unit can be assembled so the top and middle cabinets are on the left or on the right. Use these instructions for a right-sided
More informationDisplay-Top Apothecary Cabinet. Assembly Instructions. Page 1
Display-Top Apothecary Cabinet Assembly Instructions Page 1 Display-Top Apothecary Cabinet Parts List Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean,
More informationC. Middle Panel. E. Front Post. J. Front Stretcher. O Brush Chrome Pipes. P. Handle Arm. U. KD. Drawer. Head Cap Bolt 14 pcs.
88 9100 001 itchen art (Natural Finish) IMPRTNT NTE arefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts.
More informationCROWN IMPERIAL ASSEMBLY INSTRUCTIONS
CROWN IMPERIAL ASSEMBLY INSTRUCTIONS Standard Drawer Box Page 1 of 14 Standard Drawer Box Parts Parts Supplied B C D A E F G Page 2 of 14 Part Letter Part Name Quantity 300-600 Deep Pan A Base Panel 1
More informationThanks for shopping with Improvements! Louvered Space Saver Cabinet Item #512059
Thanks for shopping with Improvements! Louvered Space Saver Cabinet Item #512059 Note: Read these instructions carefully before assembling. Tools required: Philips screwdriver (not included). Find a clean,
More informationThanks for shopping with Improvements! Laundry Folding Table with 3 Clothes Hampers Item #
-- Thanks for shopping with Improvements! Laundry Folding Table with 3 Clothes Hampers Item # 568376 Note: Read these instructions carefully before assembling. Tools required: Philips screwdriver (not
More informationmila-wall (Series100) General Operating Instructions page 1 of 15
mila-wall (Series100) General Operating Instructions page 1 of 15 Step #1: Before setting up walls, lower adjustable leveling feet on each panel approximately 1". This will allow access to the threaded
More informationThanks for shopping with Improvements! Rolling Kitchen Storage Cart with Wood Top Item #583649
Thanks for shopping with Improvements! Rolling Kitchen Storage Cart with Wood Top Item #58349 Note: Read these instructions carefully before assembling. Tools required: Philips screwdriver (not included).
More informationVibe Buffet Assembly Instructions
ssembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. bolt bolt locking dowel long x nut x x0 screw x8 x H I J K small screw x4 V W safety strap x
More informationMS555200TX Porter Gaming/Media Console Espresso Finish Assembly Instructions
MS55500TX Porter Gaming/Media Console Espresso Finish Assembly Instructions For assistance with assembly, contact: Southern Enterprises Inc. Customer Service 1-800-6-5096 service@seidal.com www.seidal.com
More informationFlat Panel TV Cart Instruction Manual SKU: STAND-TV02D Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-tv02d
More informationTop Closure Kit Accessory for Music Library System
Assembly Instructions Top Closure Kit Accessory for Music Library System Contents Required Tools.....................................2 Installation Requirements............................2 Fasteners -
More informationHampshire Buffet Cabinet with Glass Doors
Thanks for shopping with Improvements! Hampshire Buffet Cabinet with Glass Doors Item #55919 Note: Read these instructions carefully before assembling. Tools required: Philips screwdriver (not included).
More informationThanks for shopping with Improvements! Providence Magazine End Table Item #547337
Thanks for shopping with Improvements! Providence Magazine End Table Item #547337 Note: This table can be assembled: with the Door pivoting from the right side or the left side (instructions show pivot
More informationMULTI-ACTIVITY PLAY TABLE
ASSEMBLY INSTRUCTIONS! WARNING: CHOKING HAZARD - Small parts. Not for children under 3 years.! CAUTION: Adult assembly required. C 2006 Melissa and Doug, Inc. All Rights Reserved www.melissaanddoug.com
More informationKA327700TX MARTINVILLE KITCHEN CART - White Assembly Instructions
KA327700TX MARTINVILLE KITCHEN CART - White Assembly Instructions For assistance with assembly contact: Southern Enterprises Inc. Customer Service 1-800-633-5096 service@seidal.com www.seidal.com MARTINVILLE
More informationWellesley Gift Wrap Station
Thanks for shopping with Improvements! Wellesley Gift Wrap Station Item #504054 Note: Read these instructions carefully before assembling. Tools required: Phillips screwdriver, flat screwdriver. Find a
More informationTuscany 32" x 79" Open Bookcase
Tuscany 32" x 79" Open Bookcase ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES If you have any questions regarding assembly or if you are missing parts, do not return
More informationHZ487300TX Javu 2-Drawer Storage
HZ487300TX Javu 2-Drawer Storage Assembly Instructions For assistance with assembly contact: Southern Enterprises Inc. Customer Service 1-800-633-5096 service@seidal.com www.seifurniturestore.com Page
More informationThanks for shopping with Improvements! Item #553001
Thanks for shopping with Improvements! Hampshire Wrapping Paper Hutch #00 Note: Read these instructions carefully before assembling. Tools required: Phillips screwdriver, flat screwdriver. ind a clean,
More informationMount to the Wall INSTALLATION MANUAL
Mount to the Wall 15 Locate the Wooden Studs This step applies to wooden stud wall installation only. Determine and mark the exact locations of two stud centers on the wall. Wooden studs should be spaced
More informationAssembly and Installation Guide
The Easy Hang Closet Solution SM Install Your elfa In An Instant. Enjoy The Benefits For A Lifetime. Basic Tools For elfa Assembly and Installation Level Hand or Power Drill Drill Bits 1/8", 3/8", 5/16"
More informationIMPORTANT SAFETY INSTRUCTIONS
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts that may have come loose inside the carton during shipment IMPORTANT SAFETY INSTRUCTIONS:
More informationJesse Entertainment Unit Assembly Instructions
esse ntertainment Unit ssembly nstructions Thank you for your purchase. Please follow the instructions below for correct assembly. bolt x32 dowel x16 D F small screw x16 L + R L + R locking nut x32 cam
More informationPanel & Shelf Identification
4 to 8 Aromatic Cedar Closet Model # 801 1 PLEASE READ INSTALLATION INSTRUCTIONS BEFORE ASSEMBLING Rev. C IF YOU ARE MISSING PARTS OR HAVE QUESTIONS PLEASE CONTACT: customerservice@cedargreen.net Tools
More informationThanks for shopping with Improvements! Hamper Cabinet with Drawer Item #512188
Thanks for shopping with Improvements! Hamper Cabinet with Drawer Item #512188 IMPORTANT: Since the bin pivots forward, this unit must sit on the floor for safety reasons. Other items of the same width
More informationPO#: HZ107700TX. Colorblock 5-Drawer Anywhere. Storage Cabinet Grayscale. Assembly Instructions
HZ1000TX Colorblock 5-Drawer Anywhere Storage Cabinet Grayscale Assembly Instructions For assistance with assembly contact: Southern Enterprises, Inc. customer service 1-00-633-506 service@seidal.com www.seidal.com
More informationBrooklyn Change Table & Drawer Set Assembly Instructions
Brooklyn Change Table & rawer Set ssembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. B C 12 mm x20 L + R L + R x28 W Safety Strap X Wall Screw
More informationItem # GUN, 12 PISTOL CABINET WITH STORAGE
Item # 37-0046 9-GUN, 12 PISTOL CABINET WITH STORAGE Tools Needed For Assembly: Screwdriver Drill Assembly Tips: If you are using an electric screwdriver for assembly, set it at low torque and do not over-tighten
More informationFA968800TX Manchester Fireplace Console - Brown Mahogany Assembly Instructions
FA968800TX Manchester Fireplace Console - Brown Mahogany Assembly Instructions For assistance with assembly, contact: Southern Enterprises Inc. Customer Service 1-800-633-5096 service@seidal.com www.seidal.com
More informationCopyright 2010, by Walker Edison Furniture Co., LLC. All rights reserved.
General Assembly Guidelines I. Insure that all parts and hardware are available before beginning assembly. II. III. IV. Follow each step carefully to insure the proper assembly of this product. Two people
More informationRiverside. Windhaven Queen Storage Bed Assembly Instructions
Queen Storage Bed Page 1 of 7 2 pcs. 4 pcs. 4 pcs. 4 pcs. 2 pcs. 5/0 Queen Storage Bed 50773 -- 5/0 Storage Footboard w/platform Note: The 50773 Storage Footboard can be used with the 50770 Panel Headboard
More informationASSEMBLY INSTRUCTIONS MANUAL
PAGE 1 OF 9 RECOMMENDED TOOLS FOR ASSEMBLY: ALLEN WRENCH (INCLUDED) BOX WRENCH (INCLUDED) PHILLIPS SCREW DRIVER (NOT INCLUDED) PARTS IN CARTON: ALLEN WRENCH SCREWS (20 EACH) ROUND HEAD SCREWS (8 EACH)
More informationThanks for shopping with Improvements! Serena File Cart with Charging Station Item #513376
Thanks for shopping with Improvements! Serena File Cart with Charging Station Item #513376 Note: Read these instructions carefully before assembling. Tools required: Philips screwdriver (not included).
More informationThanks for shopping with Improvements! Essex Hall Tree Item #583143
Thanks for shopping with Improvements! Essex Hall Tree Item #583143 Note: Read these instructions carefully before assembling. Tools required: Philips screwdriver (not included). Find a clean, smooth area
More informationRiverside. Harbor Hill Queen Storage Bed Assembly Instructions
Queen Storage Bed Page 1 of 7 8 pcs. 8 pcs. 1 pc. 2 pcs. 3 pcs. 3 pcs. 4 pcs. 4 pcs. 4 pcs. 1 pc. 1 pc. 8 pcs. 8 pcs. 8 pcs. 2 pcs. 8 pcs. 1 pc. 25770 -- 4/6-5/0 Panel Headboard (NOTE: the 25775 Leather
More informationKirra Buffet Assembly Instructions
Thank you for your purchase. lease follow the instructions below for correct assembly. C B dowel screw x x6 wedge x4 screw x4 bolt x locking nut x long screw x F screw slide x6 rail x N wheel x4 G slide
More informationBABY WOLF LOOM. Assembly Instructions for Knocked-Down Looms
BABY WOLF LOOM Assembly Instructions for Knocked-Down Looms BEFORE YOU BEGIN Please read through the directions before beginning to assemble your loom. Unpack the loom parts carefully. Do not throw away
More informationRiverside. Oakmont Queen Storage Bed Assembly Instructions
Queen Storage Bed Page 1 of 7 8 pcs. 8 pcs. 1 pc. 1 pc. 8 pcs. 8 pcs. 8 pcs. 8 pcs. 1 pc. 1 pc. 20270 --5/0 Sleigh Headboard 20274 --5/0-6/6 Bed Rails 20273 -- 5/0 Storage Footboard, Panels, Slats Queen
More informationWellington Wallbed 700 Series Assembly Instructions
Wellington Wallbed 700 Series Assembly Instructions 1. Read all instructions before proceeding. Not following instructions may result in personal harm or damage to the furniture. 2. 2 people are required
More informationWILSHIRE BED. Bed Assembly Instructions. Page 1of 5. LIFESTYLE SOLUTIONS The Fusion Of Function And Comfort With Style
WILSHIRE BED Bed Assembly Instructions. Shorter Canopy Rail Left & Right Head Board Posts Longer Canopy Rail Head Board Panel Metal Pin Slat Support Left & Right Foot Board Posts Slats Foot Board Panel
More informationDeck Mount Installation with Bench
Deck Mount Installation with Bench 1. Mark track with square. 2. Cut tracks with saw. 3. Drill ¼ hole (if needed.) 4. Countersink track. 5. Countersink all track 6. File all track ends. ends. 7. Lay out
More informationPRINCESS SINGLE BED WITH TRUNDLE
PRINCESS SINGLE BED WITH TRUNDLE If you have any questions regarding assembly or if you are missing parts, do not return this item to Sam s Wholesale Club Please call our customer service number and have
More informationAllegro Home Office Assembly Instructions. Tipping Restraint. Bun Foot W/ Leveler. 4 pcs.
email: info@riverside-furniture.com Allegro Home Office Assembly Instructions Components and Hardware List Page 1 of 5 Made in China Shelf Pin Wood Shelf File Rod & Clips 1/2"Wood Screw A 16 pcs. B 4 pcs.
More informationWorktop. Weight Capacity. 100 lbs. 21 Corner Worktop. 48 Worktop. Fits over 2 Cabinets. 72 Worktop. Fits over 3 Cabinets. 200 lbs. 150 lbs.
Bold.0 Warning: Excessive weight hazard! Use two or more people to move, assemble or install cabinets and locker to avoid back injury. Do not leave children unattended near cabinets. High risk of tipping
More informationRiverside. Harbor Hill King Storage Bed Assembly Instructions
King Storage Bed Page 1 of 7 8 pcs. 8 pcs. 1 pc. 2 pcs. 6 pcs. 3 pcs. 4 pcs. 4 pcs. 4 pcs. 1 pc. 1 pc. 2 pcs. 8 pcs. 8 pcs. 8 pcs. 8 pcs. 25780 -- 6/0-6/6 Panel Headboard (NOTE: the 25785 Leather Headboard
More informationBaby Grande or Grande Crank Shade with Cables and Housing Installation Instructions
Baby Grande or Grande Crank Shade with Cables and Housing Installation Instructions Tools Needed Drill 3/8 Metal Drill Bit Screwdriver (Flat & Phillips) Measuring Tape Pencil 4 Level Plumb Line ¼ Masonry
More informationVersion: 1.0 Revised: 6/8/2011. CBU Assembly Instructions Manual
CBU Assembly Instructions Manual Contents 1 General... 3 2 Package... 4 2.1 Packing order... 4 2.2 Unpacking... 5 3 Assembly of the body... 6 3.1 General... 6 3.2 Mounting base drilling chart... 8 3.3
More informationPerformance 2.0 Series
Performance. Series Warning: Excessive weight hazard! Warning: Excessive weight hazard! Use two or more people to move, assemble, or install cabinets and locker to avoid back injury. Do not leave children
More informationINS T A L L A TIO N INS T R U C TIO N S. Ceiling Mount Track System
Ceiling Mount Track System 10.26.2016 Specifications Ceiling Post: Unassembled 2-7/8 Assembled 1-11/16 7/8 7-9/16 5-7/8 3/8 2 Tubes 1/2 2-3/8 5 Parts and Tools Tools Needed Tape Measure Pencil Drill with
More informationSingle Mirror Cabinet
Single Mirror Cabinet Assembly Instructions - please keep for future reference YO886 464/3944 Dimensions Width - 35.5cm Depth - 16.5cm Height - 60cm Important Please read these instructions fully before
More informationThanks for shopping with Improvements! Wellesley Cart with Gate Leg Desk Extension Item #504992
Thanks for shopping with Improvements! Wellesley Cart with Gate Leg Desk Extension Item #504992 To order, call 1-800-642-2112 West Chester, OH 45069 Made in China PR-1015 If you have questions regarding
More informationINSTALLATION INSTRUCTIONS
HONEYCOMB & PLEATED Lift & Lock Cordless Lift Systems Standard Top Down/ Bottom Up INSTALLATION INSTRUCTIONS Revised 8/2018 Getting Started A few simple tools are required: - Measuring tape - Carpenters
More informationThanks for shopping with Improvements! Weatherby Corner Storage Cabinet Item #511676
Thanks for shopping with Improvements! Weatherby Corner Storage Cabinet Item #57 Note: Read these instructions carefully before assembling. Tools required: short Philips screwdriver (not included). Find
More informationFresenius Medical Care North America Service Bulletin
Fresenius Medical Care North America Service Bulletin Equipment: Bulletin: Subject: 2008K@Home Hemodialysis Machines 15-HOM-001 Rev A Optional Shunt Box Ferrite Core Installation (Update) 1.0 PURPOSE To
More informationMobile TV Cart Instruction Manual SKU: STAND-TV03E Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-tv03e
More informationTOOLS REQUIRED FOR ASSEMBLY. Rubber Mallet or Plastic Tip Hammer PARTS REQUIRED FOR ASSEMBLY OF SINGLE ENTRY STARTER.
TOOLS REQUIRED FOR ASSEMBLY Rubber Mallet or Plastic Tip Hammer Top Cover Support PARTS REQUIRED FOR ASSEMBLY OF SINGLE ENTRY STARTER Back Stop Divider Closed 'L' Upright Slotted Reinforcement Support
More information2 shelf bookcase. >> assembly instructions. ebony style # BK2SHLFXEB dpci # espresso style # BK2SHLFXES dpci #
2 shelf bookcase ebony style # BK2SHLFXEB dpci # 249-4-005 espresso style # BK2SHLFXES dpci # 249-4-006 midtone/cherry style # BK2SHLFXMT dpci # 249-4-007 white style # BK2SHLFXWH dpci # 249-4-0050 chestnut
More informationINSTALL INSTRUCTIONS WELCOME TO THE NEWAGE PERFORMANCE CABINETRY SERIES NEWAGE STEEL WELDED CABINETRY
NEWAGE STEEL WELDED CABINETRY WELCOME TO THE NEWAGE PERFORMANCE CABINETRY SERIES ALL CABINETS MUST BE MOUNTED TO STUDS ON A SECURE WALL, AS PER THESE INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS
More informationH2-50 Hydrogen Generator Field Update
This field update is intended to provide extra protection in the event the H2 generation cell fractures or cracks. Please add the additional parts to your H2-50 as soon as possible. Please take a digital
More informationSteele TV Stand Stock # BH
LOT NUMBER: DATE PURCHASED: / / Steele TV Stand Stock # BH46-084-899-02 ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store
More informationAeon AcousticPro UHD Series
Aeon AcousticPro UHD Series EDGE FREE Fixed Frame Sound Transparent Projection Screen User s Guide Product Description: The Aeon AcousticPro UHD Series is a fixed frame projection screen that uses Elite
More informationThanks for shopping with Improvements! Item #553027
Thanks for shopping with Improvements! Hampshire File Ottoman #55307 Note: Read these instructions carefully before assembling. Tools required: Phillips screwdriver, flat screwdriver. Find a clean, smooth
More informationHZ104100TX Black Contemporary Bar Cabinet Assembly Instructions PO#:
HZ104100TX Black Contemporary Bar Cabinet Assembly Instructions For assistance with assembly contact: Southern Enterprises, Inc. customer service 1-800-33-09 service@seidal.com www.seidal.com PO#: Page
More informationHZ1032A0TX/ HZ1032B0TX Shadowbox Wine/Bar Cabinet Assembly Instructions
HZ0A0TX/ HZ0B0TX Shadowbox Wine/Bar Cabinet Assembly Instructions For assistance with assembly contact: Southern Enterprises Inc. Customer Service -800--509 service@seidal.com www.seidal.com Due to weight,
More informationv1.0 ASSEMBLY GUIDE Mia Wide Bookcase
v1.0 ASSEMBLY GUIDE Mia Wide Bookcase Components Upon unpacking your bookcase from it s delivery box, you should have the pieces shown. Follow the steps on the next pages to assemble your new bookcase.
More informationShould you experience any missing or damaged parts, do not return to the store. Please contact us directly at
Congratulations! You have purchased a stylish piece of Crosley Furniture. We strive to provide fine furniture products, built with quality materials and hand finished details. Please carefully follow the
More information