C PART LIST HARDWARE LIST. Tools Required For Assembly : Philips screwdriver. Thai Patent Pending Numbers

Transcription

1 Stainless Steel Top Kitchen art with Wood reakfast ar Thank you for purchasing our quality products. Please carefully check the quantity of the parts and hardware. Please also read this assembly instructions until you understand clearly how to put the parts together, then start assembling step by step. asual Attire For Today's Home PART LIST Thai Patent Pending Numbers A. Top. Side Frame L.. Middle Frame L.. Side Frame R. E. Middle Frame R. F. ack Panel G. ack Post H. Front Post I. ack Stretcher J. Front Stretcher K. Front Rail L. ase M. Gate Leg N. K. rawer O. K. rawer (For rawer N&O packed in separate carton with hardware and assembly instructions.) P. Shelf T. rush hrome Pipes Q. Side Rack U. Handle Arm V. Round Arm R. Side Rack W. oor S. ase Rack X. oor HARWARE LIST Head ap olt 14 pcs. (+1 Extra) am Lock Screw 4 pcs. (+1 Extra) Wood Screw (for aster & Gate Leg) 2 (+2 Extra) aster 2 with lock and 2 without lock 4 pcs. Hex Wrench am Lock 4 pcs. (+1 Extra) Machine Screw for 4 pcs. Adjustable Pin 8 pcs. (+2 Extra) Wood Plug 10 pcs. (+2 Extra) Tools Required For Assembly : Philips screwdriver

2 IMPORTANT o not tighten up all the screws until each part is properly assembled. You should keep Hex Wrench in the safe place as you may need to tighten up the Head ap olts in the future. Assembly Instructions 2/4 STEP 1 Attach 4 asters to the underside of the ase (L), put the 2 asters with lock in front as you first need to lock the cart from moving. (See sticker in the bottom indicating front side) L STEP 2 Attach the ack Post (G) and Front Post (H) to the Middle Frame () and (E). Attach the assembled Middle Frame () and (E) to the ase (L). H G E L J F F F STEP 3 K K K Put the Front Rail (K) in between the Middle Frame () and (E). Attach the Side Frame () to the side of the unit with Head ap olts. Slide the ack Panels (F) into place. E

3 Assembly Instructions 3/4 STEP 4 Attach the ack and Front Stretcher (I), (J) to the assembled unit with Head ap olts. Attach the Side Frame () to the other side of the unit with Head ap olts. J I STEP 5 Q T T S Attach the Side Rack (Q) to the Side Frame () with the Head ap olts. Attach the rush hrome Pipes (T) to the pre-drilled holes of Side Rack (Q). Attach the ase Rack (S) to the Side Rack (Q). T R Attach the Side Rack (R) to the Side Frame (), using Head ap olts. STEP 6 Attach the Handle Arm (U) to the Side Frame () with Head ap olts. Slide the Round Arm (V) into place. U V U M STEP 7 Attach the Gate Leg (M) at the rear and connect it to the unit with Wood Screws. Holding Gate Leg and rear frame with Wood Screw

4 Assembly Instructions 4/4 STEP 8 Turn the Top (A) upside down and put the am Lock Screws to the pre-drilled holes. A See the Arrow on top A STEP 9 Place the Top (A) on the assembled unit. P P E Place the am Locks into the holes of the Side Frames () and (). Make sure the Arrow sign on top. and tighten all the am Locks as to secure the Top with the body. Insert the Adjustable Pins into the Side Frame (), Middle Frame () and Side Frame (), Middle Frame (E) at the desired level. Place Shelf (P) into place. STEP 10 Lift hinge Assembly Assembly Attach the s to the oor (W) and (X) using the Machine Screws. Attach the oor (W) and (X) to the Side Frame () and (), slide the door lift hinges into the side frame lift hinges. See Assembly Instructions for rawers in the separate carton. Slide the rawers (N) and (O) into place. W N N N X STEP 11 O over all holes with Wood Plugs

5 rawer (N) Unit Part List N1. Front Part for each N2. ack Part for each N3. Side Part (L.) for each N4. Side Part (R.) for each N5. ase Part for each HARWARE LIST Machine Screw for 6 pcs. 1 Wood Screw / 2 (for ottom Part) 18 pcs.(+1 Extra) Wood Screw 1 (for Side Part) 24 pcs.(+1 Extra) Assembly Instructions N3 N2 (Fig)1 N1 N4 MAKE SURE ROLLER IS ON THE AK (Fig) 1 Line up Side Parts (N3) and (N4)to the Front Part (N1) and ack Part (N2). e sure to follow the Arrow sign sticker on the parts. Using a Phillip s screwdriver, insert 1 screws into each of the 4 pre-drilled holes on the side of (N3) and (N4), then tighten half way. (Fig) 2 Turn the assembled drawer over and slide the Plywood ase Part (N5) into the grooves on Side Parts (N3) and (N4). e sure to push the plywood all the way forward so it meets the Front Part (N1). (Fig)3 N3 N2 N5 N1 N4 * If you are missing any of these parts, please contact our MI ustomer Service epartment at or fax us at (Fig) 3 (Fig) 4 N3 N5 Assemble the with Machine Screw on the Front Part(N1). (Fig)2 Insert the remaining (6) 1/2 screws into the pre-drilled holes in ase Part (N5), then tighten all screws N1 (Fig)4 N4

6 rawer (O) Unit Part List HARWARE LIST O1. Front Part O3. Side Part(L.) O4. Side Part(R.) 1 Wood Screw / 2 (for ottom Part) 6 pcs.(+1 Extra) O2. ack Part O5. ase Part Machine Screw for Wood Screw 1 (for Side Part) 8 pcs.(+1 Extra) Assembly Instructions (Fig) 2 O3 O3 O2 O5 (Fig)1 O1 O1 O4 Turn the assembled drawer over and slide the Plywood ase Part (O5) into the grooves on Side Parts (O3) and (O4). e sure to push the plywood all the way forward so it meets the Front Part (O1). MAKE SURE ROLLER IS ON THE AK (Fig) 3 (Fig) 1 Line up Side Parts (O3) and (O4)to the Front Part (O1) and ack Part (O2). e sure to follow the Arrow sign sticker on the parts. Using a Phillip s screwdriver, insert 1 screws into each of the 4 pre-drilled holes on the side of (O3) and (O4), then tighten half way. O3 O5 (Fig)2 Insert the remaining (6) 1/2 screws into the pre-drilled holes in ase Part (O5), then tighten all screws O1 O4 (Fig)3 O2 O4 (Fig)4 * If you are missing any of these parts, please contact our MI ustomer Service epartment at or fax us at (Fig) 4 Assemble the with Machine Screw on the Front Part(O1).