Thanks for shopping with Improvements! 9-Section Metal Storage Cube Item #456902

Transcription

1 Thanks for shopping with Improvements! 9-Section Metal Storage Cube Item # To order, call West Chester, OH Made in China If you have questions regarding this product, call Mon.-Fri. 9:00-5:00 EST (Ohio) and ask for our product specialists, or See many more products on the Internet! 9-Section Metal Storage Cube # Current instructions at Page of 7

2 PRTS LIST:. Top/ottom Qty: 2. Divider Qty: 2 C. Side Qty: 2 D. ack Qty: E. Shelf Qty: 6 F. Hook Qty: 4 HRDWRE LIST:. olt Qty: 6 2. Wall nchor Qty: 4. Screw Qty: 4 4. Wrench Qty: Note: Read these instructions carefully before assembling. Tools required: Phillips screwdriver, to attach the unit to a wall. Find a clean, smooth area on which to work, such as a carpet, in order to avoid scratching the painted surfaces. Wait to dispose of the packing material until assembly is complete and all parts and hardware are accounted for. Two people might be required for assembly. 9-Section Metal Storage Cube # Current instructions at Page 2 of 7

3 Step : Use four olts () to attach a Divider () between the Top/ottom (). 4 Step 2: Place the ack (D) into the holes on the side of the Divider (). Slide in the second Divider () to the ack (D) and insert the prongs on the ack (D) into the holes on the side of the Divider (). D Prongs 9-Section Metal Storage Cube # Current instructions at Page of 7

4 Step : Use two olts () at the back of the unit to attach the second Divider () to the Top and ottom. 2 Step 4: Slide two Shelves (E) between the two Dividers (). Hook the Shelves to the ack (D) and insert the pegs on the Shelves (E) into the holes on the Dividers (). Use two olts () to attach the Divider () to both the Top and ottom at the front of the unit. 2 E. 9-Section Metal Storage Cube # Current instructions at Page 4 of 7

5 Step 5: Place the ack (D) into the holes on the side of the Divider (). ttach the Side to the ack (D) and insert the prongs on the Divider () into the holes of the Side (C). ttach the Side (C) to both the Top and ottom () using two olts () at the back of the unit. 2 D C Step 6: Slide two Shelves (E) between the Divider () and the Side (C). Hook the Shelves to the ack (D) and insert the pegs on the Shelves (E) into the holes on the Divider () and Side (C). Secure the Side (C) to the Top and ottom () using two olts () at the front of the unit. 2 E C 9-Section Metal Storage Cube # Current instructions at Page 5 of 7

6 Step 7: Place ack (D) into the holes on the side of the Divider (). ttach the Side (C) to the ack (D) and insert the prongs on the Divider () into the holes on the side of the Side (C). ttach the Side (C) to the Top and ottom () using two olts () at the back of the unit. 2 C D Step 8: Slide two Shelves (E) between the Divider () and the Side (C). Hook the Shelves to the ack (D) and insert the pegs on the Shelves (E) into the holes on the Divider () and Side (C). Secure the Side (C) to the Top and ottom () using two olts () at the front of the unit. 2 E 9-Section Metal Storage Cube # Current instructions at Page 6 of 7

7 Step 9: This unit can be secured to a wall or hung on a wall. Place the storage cube against the wall in the desired position. If possible it is recommended to have at least one of the Screws screwed directly into a stud. Have another person use a pencil to mark the position of the hanging holes on the wall. Remove the storage cube from the wall. Drill holes on each of the marks you have made and insert the Wall nchors (2) into the holes. Place the storage cube on the wall again and attach using four Screws (), making sure the Screws go into the Wall nchors. (Note: If screwing into a wall stud, a Wall nchor is not needed.) Use the provided hooks to hang items such as coffee cups or decorative items from the metal storage cube. 9-Section Metal Storage Cube # Current instructions at Page 7 of 7