Thanks for shopping with Improvements! Providence Shoe/Boot Bench Item #457353

Transcription

1 Thanks for shopping with Improvements! Providence Shoe/Boot Bench Item # Note: Read these instructions carefully before assembling. It will help you become familiar with the parts and construction. Tools required: Phillips screwdriver, flat screwdriver. Wait to dispose of the packing material until assembly is complete and all parts and hardware are accounted for. Sometimes a hardware bag can be tricky to find, though they are usually taped to a part. Two people might be required for assembly. To order, call West Chester, OH Made in China HY-0415 If you have questions regarding this product, call Mon.-Fri. 9:00-5:00 EST (Ohio) and ask for our product specialists, or productspecialist@improvementscatalog.com See many more products on the Internet! Providence Shoe/Boot Bench # Current instructions at Page 1 of 6

2 Assembly Tips Find a clean, smooth area on which to work, such as a carpet, in order to avoid scratching the parts. Lay out all parts and hardware on the floor or on a table in the order of their number or letter. This will familiarize you with the parts and also help you find a part easier when you re ready to assemble it. Usually there is a small sticker on the part with the designating letter or number that matches the letter or number in the instructions. If that sticker is missing, look at the drawing in the instruction parts list, and try to recognize the part by its shape or characteristics like holes or grooves. We have provided both text and a drawing in each step, so using both will help the most. Each step assembles only a few parts, so just take it one step at a time. To use flip connectors (since the tab is small, a screwdriver might be helpful to flip it) To use Dowels - 1. Add glue (about ¼ full) in the hole(s) of each board to be joined. 2. Insert the Dowel(s) and join boards. 3. Wipe excess glue with a damp paper towel. To use Cam Locks - 1. Insert Cam Bolt until snug 2. Set boards together 3. Insert Cam Lock 4. Turn Cam Lock clockwise (half a turn) Do not overtighten Note arrow direction If it won t turn halfway, back out the Cam Bolt ½ turn and try Cam Lock again. To use Sliding Fasteners - Providence Shoe/Boot Bench # Current instructions at Page 2 of 6

3 Parts List (1) Base Qty: 1 (2) Left Side Qty: 1 (3) Right Side Qty: 1 (4) Back Qty: 1 (5) Horizontal Divider Qty: 2 (6) Vertical Divider Qty: 2 (7) Top Shelf Qty: 2 (8) Left Cubby Side Qty: 1 (9) Left Center Divider Qty: 1 (10) Right Center Divider Qty: 1 (11) Right Cubby Side Qty: 1 (12) Top Qty: 1 (13) Adjustable Shelf Qty: 1 Hardware List (A) Shelf Support Qty: 4 (B) Glue Qty: 1 (C) Bolt Qty: 4 (D) Dowel Qty: 2 Providence Shoe/Boot Bench # Current instructions at Page 3 of 6

4 To assemble Step 1 Insert Dowels (D) with Glue (B) to the two holes in the Base (1) and use the flip connectors to attach the Left Side (2) and Right Side (3) to the Base. Step 2 Insert Dowels with Glue to the three holes at the back of the Base, and use the slide connectors to secure the Back (4) to the Sides. Providence Shoe/Boot Bench # Current instructions at Page 4 of 6

5 Step 3 Fit the Horizontal Divider (5) together with the Vertical Divider (6). Fit the groove of the Top Shelf (7) on the Vertical Divider (6). Hold these pieces (5,6,&7) together while placing them against the Left Side (2). Insert a Dowel with Glue in the bottom of the Left Cubby Side (8), and set it in the holes in the Base as shown. The sides of the Top Shelf and the Horizontal Divider will fit into the slots of the Left Side Cubby. Insert one Bolt (C) through the Back and into the Left Side Cubby. Turn the flip connectors of the Left Side Cubby to secure it to the Base. 8 This hole must face the back 2 In a similar way, use the Right Cubby Side (11) to construct the cubbies on the right side. Providence Shoe/Boot Bench # Current instructions at Page 5 of 6

6 Step 4 Insert Dowels with Glue in the bottom of the Left Center Divider (9) and the Right Center Divider (10). Use the flip connectors to secure these Dividers to the Base. Use two Bolts (C) through the Back and into the Dividers. Step 5 Add Glue to the dowel holes in the Top (12), and set the Top on the unit. Turn the flip connectors to secure the Top. It might help to start with the flip connectors at one end, and progress toward the other end. Add the Shelf Pins (A) and the Adjustable Shelf (13) to the Center Dividers Providence Shoe/Boot Bench # Current instructions at Page 6 of 6