SLOANE WHITE / COBALT / CRIMSON LEANING DESK

Transcription

1 SLONE WHITE / OLT / RIMSON LENING ESK SSEMLY HRWRE Missing hardware? Please call for replacements. 2 - large bolts 6 - small bolts 10 - wood dowels 8 - spring washers 8 - flat washers 20 - small screws 2 - connecting plates 2 - desktop brackets MOUNTING HRWRE Thank you for purchasing the Sloane White / obalt / rimson Leaning esk. This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. s you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product. 1 - wall screw 1 - anchor screw TOOLS REQUIRE allen wrench (included) phillips head screwdriver drill and 1/4"drill bit 2 - wall fittings 1 - wall strap 1 - plastic anchor OMPONENTS OX 1 OMPONENTS OX desktop 2 - shelves 1 - top 1 - left 1 - right 1 Insert 4 wood dowels into top as shown. Made in Vietnam - r04 Page 1 of 4 ustomer Service Latest instructions available at

2 SLONE WHITE / OLT / RIMSON LENING ESK desktop 2 ) Insert 3 wood dowels into right as shown. wood dowel shelves ) Fit dowels of top into right. Secure top with 1 large bolt, 1 spring washer, and 1 flat washer as shown, using an allen wrench. ) Position right with 2 shelves (in descending depths) and 1 desktop as shown. Place the shortest depth shelf at the top of the s, and desktop at the bottom. large bolt spring washer flat washer top ) Insert 1 small bolt, 1 spring washer, and 1 flat washer through each shelf and desktop side. Secure each screw with an allen wrench. small bolt spring washer right flat washer left top 3 ) Insert 3 wood dowels into left as shown. ) Fit dowels of top into left. Secure top with 1 large bolt, 1 spring washer, and 1 flat washer as shown, using an allen wrench. ) Position left with 2 shelves and a desktop as shown. ) Insert 1 small bolt, 1 spring washer, and 1 flat washer through each shelf and desktop side. Secure each screw with an allen wrench. 4 ttach 2 right/left desktop brackets to the bottom of desktop and s as shown with 8 small screws per bracket. Secure with a screwdriver. Position unit. ssembly is now complete. Made in Vietnam - r04 Page 2 of 4 ustomer Service Latest instructions available at

3 SLONE WHITE / OLT / RIMSON LENING ESK wall fitting & wall screw F wall strap plastic anchor anchor screw SFETY MOUNTING SSEMLY For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. ) ttach 1 wall fitting to top of shelving unit as shown, using 1 wall screw. ) etermine the final location of shelving unit. Mark position on the wall, approximately 2" below the bracket mounted to the back of the unit. ) rill a hole in the wall stud. If the wall stud is not available, drill a hole in the wall that is slightly smaller in diameter than the anchor. Gently tap the plastic anchor until the flange of the anchor is flush with the wall. ) ttach the wall fitting to the wall by inserting 1 anchor screw through the wall fitting and into the plastic anchor in the wall. E) Place the unit so the wall fitting on the back edge is aligned with the wall fitting on wall. F) Lace one end of the wall strap through both fittings, and into the other end of the strap. G) Pull the strap tightly until secure. NOTE: If you are unsure about your wall type or what mounting method you should use, consult a qualified professional or your local hardware store. LENING N RE lean surfaces with a dry or damp soft cloth. o not use abrasive cleaners. Mounting assembly is now complete. Made in Vietnam - r04 ustomer Service Latest instructions available at Page 3 of 4

4 SLONE WHITE / OLT / RIMSON LENING ESK MULTIPLE LENING SHELVES/ESK SSEMLY If you purchased multiple leaning items, it is suggested that every two or more item be secured together. s shown, connect every 2 units with 2 connecting plates. ttach each plate with 2 small screws using a screwdriver. Repeat steps for each additional leaning unit item. Made in Vietnam - r04 Page 4 of 4 ustomer Service Latest instructions available at

5 SLONE WHITE / OLT / RIMSON LENING OOKSE SSEMLY HRWRE 4 - large bolts 10 - small bolts 18 - wood dowels 14 - spring washers 14 - flat washers 4 - small screws 2 - connecting plates Missing hardware? Please call for replacements. MOUNTING HRWRE Thank you for purchasing the Sloane White / obalt / rimson Leaning ookcase. This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. s you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product. 1 - wall screw 1 - anchor screw TOOLS REQUIRE allen wrench (included) phillips head screwdriver drill and 1/4"drill bit 2 - wall fittings 1 - wall strap 1 - plastic anchor OMPONENTS OX bottom top 1 - top bottom 5 - shelves OMPONENTS OX right 1 - left OTTOM NOTE: ottom is indicated as shown. 1 Insert 8 wood dowels into top and bottom s as shown. Made in Vietnam - r04 ustomer Service Page 1 of 4

6 SLONE WHITE / OLT / RIMSON LENING OOKSE bottom 2 ) Insert 5 wood dowels into right as shown. wood dowel ) Fit dowels of top and bottom s into right. Secure each with 1 large bolt, 1 spring washer, and 1 flat washer as shown, using an allen wrench. top ) Position right with 5 shelves (in descending depths) as shown. Place the shortest depth shelf at the top of the s, and the longest depth at the bottom. large bolt spring washer flat washer ) Insert 1 small bolt, 1 spring washer, and 1 flat washer through each shelf side. Secure each bolt with an allen wrench. small bolt right spring washer flat washer 3 ) Insert 5 wood dowels into left as shown. left ) Fit dowels of top and bottom s into left. Secure each with 1 large bolt, 1 spring washer, and 1 flat washer as shown, using an allen wrench. bottom ) Position left with 5 shelves as shown. shelves top ) Insert 1 small bolt, 1 spring washer, and 1 flat washer through each shelf side. Secure each bolt with an allen wrench. ssembly is now complete. LENING N RE lean surfaces with a dry or damp soft cloth. o not use abrasive cleaners. Made in Vietnam - r04 ustomer Service Page 2 of 4

7 SLONE WHITE / OLT / RIMSON LENING OOKSE wall fitting & wall screw F wall strap plastic anchor anchor screw SFETY MOUNTING SSEMLY For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. ) ttach 1 wall fitting to top of shelving unit as shown, using 1 wall screw. ) etermine the final location of shelving unit. Mark position on the wall, approximately 2" below the bracket mounted to the back of the unit. ) rill a hole in the wall stud. If the wall stud is not available, drill a hole in the wall that is slightly smaller in diameter than the anchor. Gently tap the plastic anchor until the flange of the anchor is flush with the wall. ) ttach the wall fitting to the wall by inserting 1 anchor screw through the wall fitting and into the plastic anchor in the wall. E) Place the unit so the wall fitting on the back edge is aligned with the wall fitting on wall. F) Lace one end of the wall strap through both fittings, and into the other end of the strap. G) Pull the strap tightly until secure. NOTE: If you are unsure about your wall type or what mounting method you should use, consult a qualified professional or your local hardware store. Mounting assembly is now complete. Made in Vietnam - r04 ustomer Service Page 3 of 4

8 SLONE WHITE / OLT / RIMSON LENING OOKSE MULTIPLE LENING SHELVES/ESK SSEMLY If you purchased multiple leaning items, it is suggested that every two or more item be secured together. s shown, connect every 2 units with 2 connecting plates. ttach each plate with 2 small screws using a screwdriver. Repeat steps for each additional leaning unit item. Made in Vietnam - r04 ustomer Service Page 4 of 4