Abrasives, Additives and Compound. for processing in vibratory finishing equipment. Consumables
|
|
- Monica Dawson
- 5 years ago
- Views:
Transcription
1 Deburring - Rounding - Grinding - Smoothing - Polishing Abrsives, Additives nd Compound for processing in vibrtory finishing equipment
2 Cermic (KE)- nd plstic bonded (KS) medi re defined by their shpe, grinding effect, grinding pttern nd size. Mteril/Form Cermic: D Tringle Grinding Effect 00 polishing Grinding Pttern smooth 0 Grinding Medi DS DSE KU DZ DZS Z ZS Tringle Angle Cut Tringle Angle Cut extreme Bll Dreizck Dreizck Schrägschnitt Angle Cut smoothing finest grinding fine grinding grinding Plstic: KE Cone strong grinding P TS Pyrmid ultr strong grinding PA Prboloid b 90 extremly strong grinding rough 9 Order exmple: KE-D /25 (KE = mteril; D = shpe; 46 = grinding effect; 5 = grinding pttern; 25/25 = size in mm)
3 Cermic Medi D Tringle 2/2 to 25/25 DS Tringle Angle Cut* 4/4 to 25/25 DSE Tringle Angle Cut extreme** 2/2 to 6/6 KU Bll 1 to 25 DZ 2/2 to 10/10 DZS Angle Cut* 4/4 to 15/18 Z Cylinder 1,5/5 bis 15/30 ZS Cylinder Angle Cut* 1,5/5 bis 15/30 Cermic Medi Further dimensions nd qulities on request *Angle Cut **Angle Cut 50-70
4 Plstic Medi KE Cone 6 to 50 P Pyrmid 5 to 50 Plstic Medi TS 20 to 50 PA Prboloid 20 to 50 Further dimensions nd qulities on request
5 Stinless Steel Medi (wet process) - polishing nd smoothing effect - vrious shpes MS-KU Bll 2 bis 5 MS-SAT Stellite 3/5 MS-NAD Needle 0,3; 0,5; 1,5 Stinless Steel Medi Wooden Polishing Medi (dry process) - polishing nd smoothing effect - vrious shpes HT Trpeze 4-12 HW Cube 4-16 Wooden Polishing Medi
6 Grnulte for Dry Polishing Nutshell Grnulte WN-P WN-S WN-U* Grnultion polishing grinding not impregnted Very corse 30 (4-6 mm) (4-6 mm) corse 50 (2,4-4 mm) 50 (2,4-4 mm) 50 (2,4-4 mm) Less corse 100 (1,7-2,4 mm) 100 (1,7-2,4 mm) 100 (1,7-2,4 mm) Grnulte Medium corse Less fine Fine Very fine 200 (1,3-1,7 mm) 300 (0,8-1 mm) 400 (0,4-0,8 mm) 500 (0,2-0,4 mm) 200 (1,3-1,7 mm) 300 (0,8-1 mm) 400 (0,4-0,8 mm) 500 (0,2-0,4 mm) 200 (1,3-1,7 mm) 300 (0,8-1 mm) 400 (0,4-0,8 mm) 500 (0,2-0,4 mm) Mize Grnulte MAS Grnultion impregnted not impregnted -- 1,7-2,2 mm Corse -- 1,1-1,6 mm -- 0,8-1,8 mm Medium 0,4-0,8 mm 0,4-0,8 mm Fine 0,2-0,4 mm 0,2-0,4 mm * Impregntion with grinding or polishing pste necessry before use
7 Plstic Grnulte Cermic Grnulte White Corundum GUU 0,25 to 0,5 mm GU 0,5 to 5,8 mm ZO 0,210 to 0,420 mm Grnulte Additives Anti dhesion blls Prevent sticking nd pcking of extremely flt nd thin workpieces Degresing compound Flocculnt Defomer Polishing pste, Brillince crem For oil- nd greseless pieces during processing in mss finishing mchines Orgnic splitting gents for supportive/enhnced wter purifiction of oil-contminted wste wter Silicone nd silicone-free defomer for queous systems. Excellent long term effect in fully synthetic KSS s well s in emulsions without negtive effects on emulsion stbility For high-qulity surfces nd corrosion protection in conjunction with nut shell grnulte nd wooden polishing medi Additives Adhesive-/shining oil Grinding pste Appliction in conjunction with grnulte nd polishing powder for enhnced substrte dhesion; relubriction of dry grnulte Roughening of lredy smoothened brsives, increse of grinding efficiency Further dimensions nd qulities on request
8 Bsiclly, ny compound cn be used for ny metl. For metls sensitive to rust, plese observe the corrosion protection. The prticulrly good suitbility nd properties of the individul compounds re indicted. Grinding Compound VF VF VF grinding / deburring / smoothing produces homogeneous surfce, suitble for circultion grinding / deburring / smoothing brightening effect, not suitble for circultion grinding / deburring / smoothing temporry corrosion protection, suitble for circultion PH-Vlue (1-%ige Lösung) Brss, Copper 7,1 Light Metl, Non- 3,6 Ferrous Metl, Stinless Steel Steel, Iron 10 Grinding Compound / Polishing Compound Compound VF VF VF grinding / smoothing / polishing brightening effect, temporry corrosion protection, not suitble for circultion Light Metl, Non- Ferrous Metl, Stinless Steel Plstic grinding / smoothing / polishing All Metls (Steel 8,8 low brightening effect, hrdly ny colour chnge of limited suitbility) the workpieces, suitble for high-gloss polishing of luminium, silver nd gold, conditionl corrosion protection, Aluminium, Slver nd Gold suitble for circultion grinding / smoothing / polishing All Metls 9,7 brightening effect, suitble for high gloss polishing (especilly for copper, stinless steel nd brss), recommendtion: mixture from 2%, high temporry corrosion protection, suitble for circultion 7,8 Polishing Compound VF VF smoothing / polishing / high-gloss polishing no brightening effect, no colour chnge of the workpieces, recommendtion: mixture from 2%, not suitble for circultion smoothing / polishing / mirror finishing brightening effect, recommendtion: mixture from 3%, temporry corrosion protection, suitble for circultion All Metls (except Steel) All Metls, especilly for Gold nd Silver 3,6 7,5 Subject to technicl chnges Avtec GmbH Erik-Numnn-Str Sindelfingen Tel info@vtec.de
Media for mass-finishing-processes
Media for mass-finishing-processes Dierk Telljohann Dipl.-Ing- (FH-D) OTEC Präzisionsfinish GmbH Dieselstrasse 8-12 75334 Straubenhardt www.otec.de Table of content: - Chips - Grinding- and polishing-granules
More information400 = finer in can = finest in can = ultra-fine in can = micro-fine in can 120
434 Specil Lpping Compounds For fine brsive, lpping nd fitting work, nd for ll other types of grinding to shpe. Cn be thinned or removed with oil, petroleum, petrol, etc. 434 Grit Grit size Content 434
More informationWHERE WE LIVE, QUALITY HAS A LONG TRADITION SIMPLY BRILLIANT HIGH-TECH JEWELRY POLISHING ECO MINI SERIES ECO MAXI SERIES. Precision finish demands
Precision finish demands WHERE WE LIVE, QUALITY HAS A LONG TRADITION Precision finish demands SIMPLY BRILLIANT HIGH-TECH JEWELRY POLISHING Founded in 1996, OTEC has quickly established itself as the market
More information''Violet'' drill series.
0. Updte B00G NEW SIZES VA-PDS VA-PDM VIOLET SERIES, HIGH PRECISION DRILLS VA-PDS VA-PDM VA-PDS-SUS VA-PDM-SUS A new stndrd for high precision drills! ''Violet'' drill series. Stble, long life Consistent
More informationTOOLS NEWS CRN ENDMILL FOR COPPER ELECTRODE
TOOLS NEWS CN ENDMILL FO COPPE ELECTODE 007. Updte B00G Series expnsion, Corner dius type now included! A gret vriety of products. Totl sizes of 0 in 7 series. Copper Electrode End Mill Series CN Series
More informationInnovative plate solutions for flexographic printing. nyloflex printing plates
Innovtive plte solutions for flexogrphic printing nyloflex printing pltes nyloflex Printing Pltes Unique nd comprehensive expertise in flexogrphic printing Printing pltes from Flint Group to meet every
More informationPERFECT SURFACES WORLDWIDE
A WELCOME FROM THE TECHNOLOGY LEADER in mass finishing Proverbial ingenuity, coupled with German efficiency and a love of perfection, are the best qualifications for developing successful ways of creating
More informationDIN ANSI Shark Line Material specific application taps. New products 2017
DIN ANSI Shrk Line Mteril specific ppliction tps New products 2017 SHARK LINE SHARK INTRODUCTION Dormer brnd mteril specific ppliction-bsed rnges DIN ANSI Shrk Tps fer high performnce nd process security.
More informationGrinding and polishing discs COMBIDISC Corundum A Abrasive disc holders
. Grinding and polishing tools //.9. Emery and fleece tools Grinding and polishing discs COMBIDISC Corundum A Abrasive disc holders Abrasive discs COMBIDISC corundum A Dimensions Grit size Recommended
More informationGrinding with style. -Abrasive web belts for fine grinding metal
A b r a s i v e s Grinding with style. -Abrasive web belts for fine grinding metal All s well that ends well -Abrasiv 3 benefits of webrax abrasive web belts 1. The backing Our abrasive web belts are manufactured
More informationDIN/ANSI Shark Line Material Specific Application Taps. New Products 2017
DIN/ANSI Shrk Line Mteril Specific Appliction Tps New Products 2017 SHARK INTRODUCTION Dormer brnd mteril specific ppliction-bsed rnges DIN ANSI Shrk Tps fer high performnce nd process security. Shrk Line
More informationUpdate B158J New Chip Breaker Inserts for Turning Expanded Inserts
2009.4 Updte B158J Expnded s New Chip Breker s for Turning Breker Offers the best performnce for utomotive prts pplictions! ysmooth chip control even t vried depths of cut, feeds nd cutting speeds! New
More informationSAMPLING S Y S T E M S. w w w. s a m p l i n g. c o m. Label Solutions. Labels for Production and Quality Control use
w w w. s m p l i n g. c o m Lbel Solutions 2017 Lbels for Production nd use SYSTEMS Which type lbel is right for me? Smpling Systems fer two types stndrd lbel bcking: Ultr Ahesive Lbels PhrmLbels 1. Ultr
More informationTubing Spacers. Backing Plate. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a a. a a. a a
Grnd Slm Instlltion Instructions TACO Metls Inc., 98 NE 179th Street Mimi, Florid 33162 hndyhnk@tcomrine.com tcomrine.com This Box Contins: 1- Port side Grnd Slm 1- Strbord side Grnd Slm 4-5/16 x 1 stinless
More informationDISC FINISHING MACHINES
Application Processing of small parts Larger parts (from approx. 50 g weight can also be processed individually) Thanks to high rotational speed and high relative speeds, reduction of processing times
More informationThe worlds smallest ball nose.* 1 Ultra high precision type.* 2. R0.02mm, a world first! * 1. Expansion. ULTRA HIGH PRECISION [±0.
Expnsion Mircle high precision bll nose end mills B08E The worlds smllest bll nose. Ultr high precision type. 0.0mm, world first! 0.0mm ) According to survey by Mitsubishi Mterils Kobe Tools. ) VCPSB-P
More informationO N T H E C U T T I N G E D G E O F T E C H N O L O G Y
A B R A S I V E P R O D U C T S C A T A L O G U E O N T H E C U T T I N G E D G E O F T E C H N O L O G Y Founded in 1981, Grinding Techniques (Pty) Ltd. is the largest privately owned abrasive manufacturer
More informationEDM Polishing Stones General Purpose Stones Detail Stones Industrial Abrasives
EDM Polishing Stones General Purpose Stones Detail Stones Industrial Abrasives Our commitment to our customers is set in stone. About Us For nearly forty years BORIDE Engineered Abrasives has developed
More informationTECHNICAL BULLETIN BELT FINISHING WITH MICRO-MESH
TECHNICAL BULLETIN BELT FINISHING WITH MICRO-MESH MICRO-MESH finishing belts provide desired surface qualities and economic benefits to many types of finishing operations, and are available in a range
More informationPOLY-PTX PROFESSIONAL
8 POLY-PTX 500 + PROFESSIONAL The original professional machine for hard permanent use from the global market leader and inventor of the longitudinal grinder. A multi-function grinder for high quality
More informationSPX Offers low cutting resistance for heavy machining & deep shoulder milling
Shell type ddition! 010. Updte B111G Indexble End ill for Deep Shoulder illing Offers low cutting resistnce for hevy mchining & deep shoulder milling y Wvy cutting edge geometry breker breks the chips
More informationCopyright 2001 Society of Manufacturing Engineers. FUNDAMENTAL MANUFACTURING PROCESSES Deburring Processes NARRATION (VO):
FUNDAMENTAL MANUFACTURING PROCESSES Deburring Processes SCENE 1. CG: Mass Finishing white text centered on black SCENE 2. CG, SUPER: Mass Finishing tape 584, 01:18:55-01:19:20 mass finishing tape 588,
More informationSurface Finishes. For woods metals and plastics
Surface Finishes For woods metals and plastics Reasons for Surface Finishes Some kind of surface finish is always necessary for the following reasons Resistance to decay (Stopping the material from rotting
More informationINTRODUCTION TO GRINDING PROCESS
GRINDING PART 2 Grinding Grinding is a material removal process accomplished by abrasive particles that are contained in a bonded grinding wheel rotating at very high surface speeds. The rotating grinding
More informationHorticulture Supplies & Services Private Limited
New Models 2017 Horticulture Supplies & Services Private Limited 1 Index Synthetic Pearl Sea Finish 03 Aluminium & Stainless Steel Planter Models 08 Metal Stands 11 2 Synthetic Pearl Sea Shell Finish Pearl
More informationStudy Guide # Vectors in R 2 and R 3. (a) v = a, b, c = a i + b j + c k; vector addition and subtraction geometrically using parallelograms
Study Guide # 1 MA 26100 - Fll 2018 1. Vectors in R 2 nd R 3 () v =, b, c = i + b j + c k; vector ddition nd subtrction geometriclly using prllelogrms spnned by u nd v; length or mgnitude of v =, b, c,
More informationGranite Surface Plate
Granite Parallel Master Granite Tri-Square Master Granite V-Block Master Granite Four Face Square Master Granite Straight Edge Master Granite Surface Plate Granite Surface Plate For layout of workpieces
More informationExample. Check that the Jacobian of the transformation to spherical coordinates is
lss, given on Feb 3, 2, for Mth 3, Winter 2 Recll tht the fctor which ppers in chnge of vrible formul when integrting is the Jcobin, which is the determinnt of mtrix of first order prtil derivtives. Exmple.
More informationAdvised RPM 50x100x19 AC AM AF AVF x100x19 AC AM AF AVF x110x19 AC AM AF AVF
KEY WAY FLAP brushes FOR METAL WORKING COATED ABRASIVE KWF KWF with flexible coated abrasive flaps for rust removal, welding marks, oxidations and masking of metal surfaces. 2988 corundum cloth easily
More informationIntroduction. Unitized abrasive materials. Context
Unitized Introduction With its slogan Time saving abrasives Cibo is constantly striving to save our customers time and money. The range of unitized abrasive materials fits in perfectly with this strategy.
More informationHOW TO STAY COMPETITIVE DUE TO OPTIMIZED SURFACE FINISHING
POLISHING UP ON FINISHING HOW TO STAY COMPETITIVE DUE TO OPTIMIZED SURFACE FINISHING 1. THE COMPANY...3 2. INTRODUCTION...3 3. FINISHING MEDIA...5 3.1. Quality (roughness) of media and its effects...5
More informationMSRS90. Notched Inserts Reduce Cutting Forces When Entering the Workpiece Stable Machining without Chattering
90 Notched Inserts Reduce Cutting Forces When ntering the Workpiece tle Mchining without Chttering mooth Chip vcution Prevents Frcturing Cused y Biting Chips MGACOAT NANO For xtended Tool Life igh Mchining
More informationMulti-purpose scissors Blades made of stainless steel, handle made of impact-proof plastics. Use For right-hand and left-hand use.
73001-73002 Specil steel. Jeweller's shers 73001 Stright hndles. 73002 With hndle rings. 73001 73002 Overll length Cutting edge 73001 73002 180 Stright, with screw 101 101 73007 Specil sheet metl shers
More informationBurnishing machine TRINOXFLEX Set. BSE Set
Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 Burnishing machine TRINOXFLEX Set BSE 4-3 00 Set 433.438 Power input 400 watt Power output 880 watt Max. tool Ø 25 Tool width 00 Tool
More informationTHE STUDY OF INFLUENCE CORE MATERIALS ON TECHNOLOGICAL PROPERTIES OF UNIVERSAL BENTONITE MOULDING MATERIALS. Matej BEZNÁK, Vladimír HANZEN, Ján VRABEC
THE STUDY OF INFLUENCE CORE MATERIALS ON TECHNOLOGICAL PROPERTIES OF UNIVERSAL BENTONITE MOULDING MATERIALS Mtej BEZNÁK, Vldimír HANZEN, Ján VRABEC Authors: Mtej Beznák, Assoc. Prof. PhD., Vldimír Hnzen,
More informationFor results that shine.
METAL For results that shine. New FEIN products for machining stainless steel surfaces New FEIN stainless steel products durability as standard. Need to remove dirt, tarnishing, scratches or welded seams?
More informationDRAG FINISHING UNITS DF SERIES
DRAG FINISHING UNITS DF SERIES PERFECT SURFACES WORLDWIDE 2 THE DRAG FINISHING PROCESS OTEC: WE MAKE THE DIFFERENCE Polishing, deburring, rounding or smoothing: We build drag finishing systems to finish
More informationArray chip resistors size ARC241/ARC242 ARV241/ARV242
Arry chip resistors FEATURES 4 0603 sized resistors in one 1206-sized pckge Reduced reel exchnge time Low ssembly costs Reduced PCB re Reduced size of finl equipment Higher component nd equipment relibility.
More informationDESIGN FOR POLISHING AND PLATING
DESIGN FOR POLISHING AND PLATING Polishing and plating are generally considered to be a part of finishing process. Polishing processes Conventional polishing In conventional polishing, surface irregularities
More informationSpecial Brushes for Metals, Wood and Hard Plastics
Pneumatic Surface Finisher Save time sanding and polishing. 4 wide face is ideal for finishing stainless steel, metals, wood and synthetics. PNEUMATIC SURFACE FINISHER / ACCESSORIES / SPECIAL BRUSHES The
More informationNEW from kwb. All-rounder/multi-tool accessories. suitable accessories for sawing, milling, grating, scraping, grinding
NEW from kwb. All-rounder/multi-tool accessories suitable accessories for sawing, milling, grating, scraping, grinding CRV plunge-cut saw blade for wood Cuts wood up to 28 mm (10 mm), 48 mm (22 mm, 34
More informationTechnical Data Sheet ACRYLIC FILLER 4:1 Acrylic filler with anti-corrosion additives RELATED PRODUCTS. Acrylic and polyurethane thinner
Acrylic filler with anti-corrosion additives RELATED PRODUCTS Acrylic filler hardener Acrylic and polyurethane thinner PROPERTIES A product designed and dedicated for renovation of classic cars Universal
More information7-1
Tube Cleaning Brushes Fitting Cleaning Brushes available with wire or plastic handle Fitting Cleaning Brushes clean the inside of fittings faster. For plumbing or refrigeration applications. Carbon steel
More informationWHERE WE LIVE, QUALITY HAS A LONG TRADITION DRAG FINISHING UNITS SF SERIES. Precision finish demands. Precision finish demands
Precision finish demands WHERE WE LIVE, QUALITY HAS A LONG TRADITION Precision finish demands DRAG FINISHING UNITS DF SERIES Founded in 1996, OTEC has quickly estab lished itself as the market s technology
More informationPERFECT SURFACES WORLDWIDE
A WELCOME FROM THE TECHNOLOGY LEADER in mass finishing Proverbial ingenuity, coupled with German efficiency and a love of perfection, are the best qualifications for developing successful ways of creating
More informationKIESOW DR. BRINKMANN GRINDING POLISHING
KIESOW DR. BRINKMANN GRINDING POLISHING BEAUTIFUL SURFACES Since the establishment of our company in 1921 we have been developing and producing high-performance polishing agents in solid and liquid form
More informationProduct Overview. Electric Pneumatic Hydraulic. Concrete and Masonry Dust Collection Systems Hot Work Zone Tools
Electric Pneumatic Hydraulic Product Overview Metalworking Surface Finishing Surface Preparation Concrete and Masonry Dust Collection Systems Hot Work Zone Tools www.csunitec.com Metalworking In the shop
More informationReliable solutions with optimised performance
Reliable solutions with optimised performance 3M innovation provides quality you can count on in a full line of premium engineered abrasives and convenient all-purpose abrasive products for use in stock
More information6043 DESIGN AND TECHNOLOGY
www.onlineexamhelp.com www.onlineexamhelp.com CAMBRIDGE INTERNATIONAL EXAMINATIONS GCE Ordinary Level MARK SCHEME for the October/November 2013 series 6043 DESIGN AND TECHNOLOGY 6043/01 Paper 1, maximum
More informationAPPLICATION MANUAL. application manual >> ARMA-CHEK R. application manual
APPLICATION MANUAL R ppliction mnul >> ARMA-CHEK R ppliction mnul R R APPLICATION MANUAL 1 GENERAL 3» Working with Arm-Chek R 3» Tools for instlling Arm-Chek R 3» Correct use of Armflex dhesive 4» Applying
More informationASSEMBLY INSTRUCTIONS 5PC Storage Dining Set
ASSEMLY INSTRUTIONS 5P Storge Dining Set Sers Stock # 56170 VL Stock #07-2204 U S T O M E R S E R V I E I N F O R M AT I O N Victory Lnd Group, Inc 1350 Munger Rd rtlett, IL 60103 WE: http://www.victorylndgroup.com
More informationCreating shining results: Perfect surfaces in 3 steps.
Creating shining results: Perfect surfaces in 3 steps. www.rhodius-abrasives.com Step 1 Conditioning Your tool: Combination of abrasive cloth and non-woven Remove last scratches from surfaces, for example
More informationUnit 3. Engineering. Section 11. Engineering Processes LO3. AC3.1 AC3.2
Engineering Unit 3 Section 11 Engineering Processes LO3. AC3.1 AC3.2 Joining Materials Joints between materials can be temporary or permanent. Joints can be formed with adhesives, frame joints, brazed
More informationFinishing Process. By Prof.A.Chandrashekhar
Finishing Process By Prof.A.Chandrashekhar Introduction Finishing process are different from other manufacturing processes. The distinction between the finishing processes and other manufacturing processes
More informationAnti-Surge Thick Film Chip Resistors Rtings ERJP3 (63) (63) ERJP6 ERJP8 (26) ERJP4 (2) Power Rting (3) t 7 C (W) Element Voltge () Mximum Overlod Volt
Anti-Surge Thick Film Chip Resistors Anti-Surge Thick Film Chip Re sis tors 63, 85, 26, 2 : ERJ P3, PA3, P6, P8, P4 Fetures ESD surge chrcteristics superior to stndrd metl fi lm resistors High relibility
More informationECO Series EF Series. Perfect surfaces. Perfect surfaces. Worldwide.
Perfect surfaces. Perfect surfaces. Worldwide. Worldwide. THE COMPANY Founded in 1996, OTEC has quickly established itself in the market with new machine concepts, innovations and advancements. For each
More informationNew Milling Series. Metric type is added for all line up!! Tough edge GT chip breaker MSE45-SF MTE90-SF. Wiper insert is added for MSE45-SF type.
New Milling eries Metric type is dded for ll line up!! Octgonl MOF mill MOF ough edge G chip reker sy edge djustment M45F qure Insert~90 houlders New MO90 Wiper insert is dded for M45F type. sy edge djustment
More informationNEW COATINGS FOR THE FUNCTIONALIZATION OF ENAMELLED SURFACES
NEW COATINGS FOR THE FUNCTIONALIZATION OF ENAMELLED SURFACES Giovanni Baldi Ce.Ri.Col. e-mail: baldig@colorobbia.it Andrea Cioni Ce.Ri.Col. e-mail: cionia@colorobbia.it Valentina Dami Ce.Ri.Col. e-mail:
More informationEnhanced performance compression solutions
Enhnced performnce compression solutions Fittings Introduction Pegler Yorkshire hs upgrded the Kuterlite K900 rnge to Kuterlite K900-PRO As prt of our continuous improvement nd development progrmme we
More informationHigh-quality, water-dilutable satin gloss enamel on the basis of a modified alkyd technology.
Product Data Sheet High-quality, water-dilutable satin gloss enamel on the basis of a modified alkyd technology. ralstoncolour.com /picto Excellent outdoor resistance Excellent flow and optimal hiding
More informationWe can supply the following Types of Tap with All STANDARD s like ISO, BS, DIN, JIS, ANSI etc. Spiral Point. Right & Left Hand Slow helix 0 0
TAP MANUFACTURING MIRANDA Ground Tps will be supplied in M, M5, M Grde of HSS. Tps of di 7. & below will be supplied with externl (mle) center on both side or chmfer t Shnk side. And di nd bove will be
More informationIonizer. Series IZS31. RoHS
Ionizer Series IZS3 3 types of the sensors re vilble. Autoblnce sensor [High-precision type] Adjusts ion blnce ner the workpiece to reduce ny disturbnce interference! Autoblnce sensor [Body-mounting type]
More informationPTX Grinding Wheels for Coarse and Fine Finishing
PTX Grinding Wheels for Coarse and Fine Finishing PTX abrasives from CS Unitec are made according to high quality standards. A unique production process guarantees high concentricity and thus vibration-free
More informationSaw, Files, Grinders and Brushes
ß 7005-7008 0 Overall length approx. 295, working length approx. 15, trim height approx. 25. 7005 Smooth, hardened cast steel wire, 0,35 Ø. Wire scratch brushes 7007 Brass wire, fine, 0,15 Ø, crimped.
More informationNew Product Update & Parts Information
Update & Parts NEW Range Liquid Accessories Range Vapormatic is pleased to introduce a new liquid accessories range to replace existing s. The NEW range is manufactured in the UK, to ISO 9001 standard.
More informationBetter Soldering (A COOPER Tools Reprint) Overview Solder and Flux Base Material
Better Soldering (A COOPER Tools Reprint) Purpose We hope this short manual will help explain the basics of Soldering. The emphasis will be on the care and use of equipment. Overview Soldering is accomplished
More informationPUTTIES
CATALOGUE PUTTIES - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - FILLERS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9 CLEAR COATS - - - - - - - - - - -
More informationFibratex Convolute Wheels
Clean and Finish Convolute Wheels Soft, conformable Open-mesh Consistent finish Reduced loading An open-mesh product for cleaning and finishing operations. These wheels are: used with light/moderate pressure
More informationSoldering Basics. Purpose We hope this short manual will help explain the basics of Soldering. The emphasis will be on the care and use of equipment.
Soldering Basics Purpose We hope this short manual will help explain the basics of Soldering. The emphasis will be on the care and use of equipment. Overview Soldering is accomplished by quickly heating
More informationAbrasives. Abrasives OUTLETS NATIONWIDE
OUTLETS NTIONWIDE 18 comprehensive range of abrasive products manufactured to the World Safety Standard (OS) & EN Specification to ensure product performance, durability & consistency. 20-22 23 23-24 24
More informationAPPLICATION Pad printing inks for printing of non-treated polypropylene (PP) for applications not requiring high resistances.
Product Data Sheet Pad Printing Ink TP/PP & TP/PP-A Solvent Based Pad Printing Ink Range, 1-Component APPLICATION Pad printing inks for printing of non-treated polypropylene (PP) for applications not requiring
More informationAnti-Surge Thick Film Chip Resistors
Anti-Surge Thick Film Chip Resistors Anti-Surge Thick Film Chip Re sis tors Type: ER PA, P3, PA3, P, P8, P4 Fetures ESD surge chrcteristics superior to stndrd metl fi lm resistors High relibility Metl
More informationUltrasonic Level Measurement DU 60 Z and DU 61 Z Sensors
Technicl Informtion TI 9F//en Ultrsonic Level Mesurement DU 6 Z nd DU 6 Z Sensors Modulr design, corrosion-resistnt Approved for explosion hzrdous res DU 6 Z Mesuring rnge pprox. m DU 6 Z Mesuring rnge
More informationTraditional Grinding & Polishing
Traditional Grinding & Polishing Grinding Wheels 3.2 Discs 3.4 Polishing & Buffing Powders 3.5 Felt Buffers 3.7 SECTION 3 Grinding Wheels RADIAC / NATIONAL SILICON CARBIDE WHEELS A high quality, made in
More informationPOWER TOOL ACCESSORIES
POWER TOOL ACCESSORIES SUPER PREMIUM CHALLENGER SEGMENTED SAW 100% hot press Anti clog bond system High premium treated diamonds Effortless fast cutting Segmented 105 1.8 X 8 20 Super Hard Granite and
More informationVector Calculus. 1 Line Integrals
Vector lculus 1 Line Integrls Mss problem. Find the mss M of very thin wire whose liner density function (the mss per unit length) is known. We model the wire by smooth curve between two points P nd Q
More informationLarge Commercial Trunking
Lrge Commercil Trunking 3.2 CONTENTS Lrge Commercil SIGNO BK - PVC-U...................3.7 Trunking 110x70 to 220x70mm SIGNO BA - Aluminium............... 3.13 110x70 to 220x70mm SIGNO BS - Steel...................
More informationSome cases of contact dermatitis in dentists and surgeons from use of methylmethacrylate monomer have been reported (1). It is advisable to wear glove
Technical Note: Prosthetic Applications of Methylmethacrylate Acrylic Plastic Scott Hornbeak, C.P.O., B.S. Richard J. Boryk, C.P., B.A. Timothy B. Staats, M.A.C.P. Methylmethacrylate, or acrylic, is a
More informationCold curing adhesive K-X280
Instructions for use English Cold curing adhesive K-X280 A4048-1.0 en English 1 Safety instructions... 3 2 General information... 3 2.1 Scope of delivery for K-X280... 3 2.2 Accessories required for installation...
More informationElastic bonded abrasives
Elastic bonded abrasives ARTIFEX Dr. Lohmann GmbH & Co. KG Feldstrasse 8 DE 24568 Kaltenkirchen, Germany Phone: +49 (0) 4191 935-0 info@artifex-abrasives.de www.artifex-abrasives.de introduction Ceramic
More informationSurface Roughness. There are three reasons:
It is often erroneously thought that the surface of commutators or slip rings should be brilliant and polished to ensure an optimal performance of carbon brushes. Quite the reverse! Apart from low load
More informationModule Resource Manual. Marking Out Techniques MEC078 SAMPLE
Module Resource Manual Marking Out Techniques MEC078 This 1 st edition published in November 2002 by Manufacturing and Engineering Division NSW TAFE Commission PO Box 218 Bankstown NSW 2200 This work is
More informationTOOLS NEWS B216B. High Feed Finish Milling Cutter FMAX. Feed Maximum (FMAX) Milling cutter for ultra efficient and accurate finishing.
TOOLS NEWS B216B Feed Maximum () Milling cutter for ultra efficient and accurate finishing. By CG image Ultra high efficiency machining The ultra fi ne pitch design is ideal for high effi ciency machining
More informationAbrasive products for the automotive industry
Genuine STARCKE. Since 1829. Abrasive products for the automotive industry www.starcke.de Genuine Starcke. Since 1829. AUTOMOTIVE EXPERTISE Your partner throughout the manufacturing process 1. Stamping
More informationMFAH. Minimizes Burrs for High Quality Machining Results. Low Cutting Force Design
igh fficiency Milling Cutter for Finishing Aluminum MFA igh fficiency Milling Cutter for Finishing Aluminum MFA NW CG Imge Low Cutting Force Minimizes Burrs nd Chipping for igh Qulity Mchining Results
More informationBurr analysis in microgrooving
Int J dv Mnuf Technol (1) 5:569 577 OI 1.17/s17-1-516-7 ORIGINL RTICLE Burr nlysis in microgrooving uy Le & Jong-Min Lee & Su-Jin Kim & ong-yoon Lee & Seok-Woo Lee Received: 3 July 9 /ccepted: 4 Jnury
More informationMultichem Sp. z o.o.
Product Info Table of Contents Aqua 2G Waterborne base coat....4 JetBlack Special coat 1K....34 Sachet WAX (NEW) Fine compound Wax 4....58 2-001 (NEW) Aqua eco binder....6 CP 582 Bumper Acrylic lacquer
More informationBRUSHES WITH SHANK 60 61
60 6 Wheel Brushes with Shank Knot Wheel Brushes with Shank Ø 6 mm D A H Z R RPM Pack. STH 0. 0.0 STH 0.0 0.00 ROH 0.0 0.00 mm inch mm inch mm inch max. Art.-No. Art.-No. Art.-No. 7 9 /8 /8 8,000 0 7.98.
More informationFMAX. Feed Maximum (FMAX) milling cutter for ultra efficient and accurate finishing. TOOLS NEWS. High Feed Finish Milling Cutter for Aluminum Alloys
High Feed Finish Milling Cutter for s TOOLS NEWS 2017.4 Update B216G FMAX Item Expansion Feed Maximum (FMAX) milling cutter for ultra efficient and accurate finishing. By CG image High Feed Finish Milling
More informationProduct handbook. Drilling & Threading. The perfect thread
roduct hndbook Drilling & Threding _ Wlter Titex & Wlter rototyp The perfect thred COTETS 2 Appliction exmples 2 Longitudinl member mchining 4 Ger mchining 6 roduct informtion 6 Wlter Titex X treme lus
More informationGrinding and polishing stones. Overview. 2. Grinding and polishing tools
. Grinding and polishing tools Grinding and polishing tools Overview 0 0 8 Diamond compound polishing system joke Magic Lapping polishing and grinding compounds Felts and cloths Lapping tools Polishing
More informationMetal 3in1. Applied directly to rust A smooth gloss anti-rust enamel paint for metal surfaces
Applied directly to rust A smooth gloss anti-rust enamel paint for metal surfaces It prevents humidity from penetrating, providing long-lasting rust protection Highly resistant to ultraviolet radiation,
More informationUnit PO0205K Knowledge of Applying Fillers and Foundation Materials
Assessment Requirements Unit PO0205K Knowledge of Applying Fillers and Foundation Materials Content: The types of substrates likely to be found in vehicle refinishing a. List types of substrate to include:
More informationSandpaper Product Guide. Premium Automotive Aftermarket Quality Complete Selection of Hand & Power Sanding Accessories Excellent Value
Sandpaper Product Guide Premium Automotive Aftermarket Quality Complete Selection of Hand & Power Sanding Accessories Excellent Value Index Introduction to Abrasives Abrasive Components... 3 Sandpaper
More informationspecial line perfect line evolution line
Flap discs 3 61 Product lines For craftsmen or industrial use - three precisely coordinated product lines offer the right flap disc for every user and every application. All discs comply with the relevant
More informationCOLOUR SHADES - OVERVIEW
Product Data Sheet Pad Printing Ink TP 218/GL Solvent Based Pad Printing Ink Range, 2-Component APPLICATION Pad printing inks for printing on glass, ceramics, duroplastics, metals as well as chromium and
More informationNUMERALS
NUMERALS 0161 796 7268 sales@uapcorporate.com 1 Introduction Prided on product excellence and innovation; UAP Limited, have an unrivalled reputation for the products we supply and the service we provide.
More informationGolden angels in an elegant design
Golden angels in an elegant design The magic of advent these modern-looking, golden-gowned angels are simply perfect for giving your home a festive Christmas feel. Made using the clay-like FIMOair basic
More informationOperation Manual. Addendum. Embroidery Machine. Product Code: 884-T13
Emroidery Mchine Opertion Mnul Addendum Product Code: 884-T13 Be sure to red this document efore using the mchine. We recommend tht you keep this document nery for future reference. ABOUT THIS MANUAL ABOUT
More informationSBN K-TIP cbn Sintered Compacts
PCBN SBN K-TIP cbn Sinered Compcs SHOWA DENKO K.K. TM PCBN SBN K-TIP TM cbn Sinered Compcs SBN K-TIP is morphologiclly feured in h cbn grins consiue he skeleon wih specil binders filling voids nd creing
More information