WALL STANDARD STA-POLE STA-POLE INNOVATIVE VERSATILE SUSTAINABLE ATTACHES DIRECTLY TO WALL STAND OFF APPLICATION CONTINUOUS REAR SHELF APPLICATION
|
|
- Henry Jordan
- 5 years ago
- Views:
Transcription
1 WALL STANDARD ATTACHES DIRECTLY TO WALL STAND OFF APPLICATION CONTINUOUS REAR SHELF APPLICATION INNOVATIVE VERSATILE SUSTAINABLE PATENT PROTECTED / MADE IN THE USA
2 WALL STANDARD ATTACHES DIRECTLY TO WALL 1 SATIN ALUMINUM STANDARD / ARMS WOOD LIP SHELVES WOOD LAY- ON SHELVES FINSIHED WOOD FASCIA GLASS + ALUMINUM SHELVES WHITE POWDERCOAT STANDARDS/ARMS ALUMINUM + GLASS SHELVES PAINTED FASCIA ALUMINUM + GLASS SHELVES ALUMINUM FASCIA 6 WOOD LIP + ALUMNUM SHELVES BAMBOO LAY-ON + WOOD LIP SHELVES WOOD LIP + GLASS SHELVES WOOD FASCIA WALL STANDARD 2. ARM BRACKET 3. WOOD FASCIA (OPTIONAL) 4. METAL FASCIA (OPTIONAL) 5. SHELF SURFACES 6. STORAGE OPTIONS ATTACH DIRECTLY TO WALL PRE-DRILLED IN SPECIFIED LENGTHS VARIETY OF LENGTHS ATTACH TO EITHER OR BOTH SIDES OF STANDARD ROTATE TRAP SCREW/PLATE FOR CONNECTION AVAILABLE FINISHED OR PAINTABLE APPLY NEOPRENE STRIPS TO BACK SURFACE PLACE IN CENTER OF CHANNEL TAP INTO PLACE TO SECURE POSITION IN CENTER CHANNEL SNAP INTO PLACE SEE PAGE 4+5 FOR OPTIONS ARM MAY BE INSERTED THRU BACK PANEL CNC CUT ¼ DEEP TO FLUSH ARM BRACKET TO INSIDE SIDE PANEL. ALLOWS CASES TO BUILD LEFT TO RIGHT PATENT PROTECTED / MADE IN THE USA
3 WALL STANDARD ATTACHES DIRECTLY TO WALL (2) 84 WALL STANDARDS (7) 60 WALL STANDARDS (2) INTERNAL CASE CONNECTOR BRACKETS (42) ARM BRACKETS (1) TWO DOOR CASE UNIT (2) 2 LIP ALUMINUM LIGHTING SHELF (4) INTERNAL CASE CONNECTOR BRACKETS (7) DESK SUPPORTS 4 5 MADE IN THE USA No longer do you need to begin at point zero... Just simply adjust and add on to your existing solution. 21C-Systems offers modular wood selves and displays for homes, businesses, retail stores, hospitality and institutional environments. These easily adjustable shelves compliment traditional, transitional, contemporary, and mid century modern environments. The 21C shelving system provides storage and space management solutions. Our product is completely re-configurable. Need a new desk surface, storage or additional shelving, simply add it onto your existing 21C solution. The user is not limited to one face material either... the offering of materials to use as shelving, storage, and desk surfaces is vast. Should you need to change finishes and materials within your solution simply specify your new design needs and we will ship to you the required components to dress your walls as needed. PATENTED DESIGN ALUMINUM SHELF W/ END CAP GLASS LAY ON SHELF WOOD LAY ON SHELF WOOD LIP SHELF 2 FRONT LIP ALUMINUM SHELF LAMINATE LAY ON SHELF 2.25 WOOD LIP SHELF GLASS SHELF SHOWN w/ 2.25 WOOD STANDARD SHOWN w/ METAL FASCIA STANDARD SHOWN w/o FASCIA STANDARD SHOWN w/o FASCIA STANDARD SHOWN w/ WOOD FASCIA STANDARD SHOWN w/ METAL FASCIA STANDARD SHOWN w/ PAINTED WOOD STANDARD SHOWN w/ WOOD FASCIA LIP SHELF STRIP FASCIA FOR LONG SHELF LENGTHS SIMPLY STANDARD SHOWN w/o FASCIA ADD AN ARM ON EACH SIDE OF THE STANDARD AND PLACE THE SHELVES PATENT PROTECTED / MADE IN THE USA END TO END
4 STA- POLE THE SYSTEM OFFERS A NEW DIMENSION TO THE ALREADY FLEXIBLE AND ADAPTABLE 21C-SYSTEM OF PRODUCTS. ADD SHELVES OR CASES AT ANY LOCATION. ADJUSTABLE FLEXIBLE AND BEAUTIFUL. IS SHIPPED W/ 2 LEVELER CUT TO LENGTH ANGLE BRACKETS SUPPORT EITHER SHELVES OR CASE PIECES AND MAY BE INSERTED AT ANY POINT. COMBINE THE MATERIALS IN THE SHELVES AND CASES OR USE THE SAME. WE ARE PROUD OF OUR WORK AND WORK EVERYDAY TO BRING MORE EXCITING OPTIONS TO YOU. MADE IN THE USA. PATENT PENDING TOP TIE BAR VARIETY OF LENGTHS ATTACHES TO TOP OF FOR WALL CONNECTION WALL CONNECTOR ATTACHES TO WALL STAND OFF APPLICATION CEILING CONNECTOR ATTACHES TO TOP OF FOR CONNECTION TO CEILING ATTACHMENT TO BLOCKING IS REQUIRED 6 7 BOTTOM TIE BAR TIES THE LOWER PORTION OF THE TO WALL L SHELF BRACKET ATTACHES TO EITHER SIDE OF USED FOR SHELF OR CASE APPLICATION AS SHOWN: SATIN ALUMINUM STANDARDS AND ARM BRACKETS. ALUMINUM SHELVES WITH 5/8 AND 2.5 FACES; GLASS AND WOOD SHELVES. DRAWER UNITS PATENT PENDING / MADE IN THE USA
5 STA- POLE THE REAR CONTINUOUS SELF DESIGN OFFERS THE ABILITY TO RUN EXTENDED LENGHTS OF SHELVES BEHIND THE. IS SHIPPED W/ 2 LEVELER CUT TO LENGTH SLIDING DOOR USE THE EXTENDED TOP TIE BAR TO ALLOW FOR THE DOOR TO SLIDE BEHIND YOUR LIBRARY WALL. OUR SYSTEM ALLOWS FOR THE CREATIVE MIND TO HAVE FUN AND IN THE END HAVE A SOLUTION WHICH WORKS. CONTINUOUS REAR SHELF APPLICATION MADE IN THE USA. PATENT PENDING TOP TIE BAR VARIETY OF LENGTHS ATTACHES TO TOP OF FOR WALL CONNECTION WALL CONNECTOR ATTACHES TO WALL CEILING CONNECTOR ATTACHES TO TOP OF FOR CONNECTION TO CEILING ATTACHMENT TO BLOCKING IS REQUIRED 8 9 BOTTOM TIE BAR TIES THE LOWER PORTION OF THE TO WALL CONTINUOUS REAR ARM BRACKET ATTACHES TO EITHER SIDE OF CONTINUOUS REAR SHELF BEHIND POLE AS SHOWN: SATIN ALUMINUM STANDARDS WITH CONTINUOUS REAR SHELF ARMS; ALUMINUM, WOOD AND GLASS SHELVES. PATENT PENDING / MADE IN THE USA
6 WALL STANDARD + WALL STANDARD + MADE IN THE USA INNOVATIVE VERSITILE SUSTAINABLE OUR GREATEST STORY IS OUR POSITIVE IMPACT ON THE ENVIRONMENT. NO LONGER IS THERE A NEED FOR A TYPICAL BUILT-IN SOLUTIONS. ELEMENTS MAY BE ADDED AND / OR ADJUSTED TO ADAPT TO EVOLVING NEEDS WITHIN THE SAME ENVIROMENT. SIMPLY ADD A DESK SURFACE, STORAGE UNIT OR ADDITIONAL SHELVING. THE 21C SYSTEM IS A PRECISION DESIGNED ADJUSTABLE SOLUTION FOR APPLICATION IN VIRTUALLY ANY ENVIRONMENT. WALL STANDARD + AS SHOWN. WALL STANDARD WORK STATIONS ARE 10 SEPARATED WITH STORAGE UNITS 11 LOCATED ON THE SYSTEM. ALUMINUM,WOOD LAMINATE AND GLASS SHELVING MAY EASILY MIX IN SAME SOLUTION. ADD AN ALUMINUM OR WOOD FASCIA STRIP TO THE WALL STANDARD WALL STANDARD TO CONCEAL THE WALL ATTACHMENT ANCHORS IN THE CENTER CHANNEL. CUSTOM MATERIALS AND SIZES ARE OFFERED. SURFACE MATERIALS: WOOD / GLASS / ALUMINUM SURFACE MATERIALS: LAMINATE / GLASS / ALUMINUM D A S PATENT PROTECTED PATENT PENDING / MADE IN THE USA
7 INSTITUTIONAL LIBRARY OFFICE DISPLAY CORPORATE OFFICES 2107 CHESTER RIDGE DRIVE SUITE 103 HIGH POINT NC MAILING ADDRESS POST OFFICE BOX 5106 HIGH POINT NC SHIPPING ADDRESS 1414 BETHEL DRIVE HIGH POINT NC CONTACT T SALES@21C-SYSTEMS.COM Product Design by MM Reynolds Photography and Brochure Design by
21 C SHELVING SYSTEMS 21 C Shelving Systems consist of innovative products that provide visually appealing shelving and storage to any area. This syst
21 C SHELVING SYSTEMS 21 C SHELVING SYSTEMS 21 C Shelving Systems consist of innovative products that provide visually appealing shelving and storage to any area. This system is available in two unique
More informationInstallation Manual for Metal Emperor Lockers
P a g e 1 Table of Contents Page General Notes and Tools Required 2-3 Assemble Shelves with Coat Hooks/Coat Rods 4 Fastening Chart 5 Knock Down Locker Assembly (Banks of Three) 6-12 Appendix A: Dress End
More informationExtra Wide Designer Lockers Series Installation Instructions
Extra Wide Designer Lockers 20000 Series Thank you for selecting the 20000 Series Extra Wide Designer Lockers. We are confident that the quality and construction of the lockers will prove to be a good
More informationcompile system INSTALLATION GUIDE Updated January 2019
INSTALLATION GUIDE Updated January 09 compile system Table of Contents Panels 0 Quick Connect Clips 0 Lock Clips 0 Panel Trims 0 Privacy Glass 0 Post Base Covers 04 Electrical 04 Power Distribution Harness
More informationAssembly Instructions Above Worksurface Riser Shelf Systems and Back / End Stops
Assembly Instructions Above Riser Shelf Systems and Back / End Stops Back Stops and End Stops Adjustable Riser Shelves Instrument Riser Shelves Stationary Riser Shelves IMPORTANT PLEASE READ THESE INSTRUCTIONS
More informationL & T Open Shelf Filing System
L & T Open Shelf Filing System Contemporary Styling Shelf covers shelf supports for a clean contemporary look. Sleek, Attractive Appearance With no exposed holes on uprights. Easy Assembly Shelf supports
More informationRevised
Indentify Non-powered panels and separate from Powered panels. Non-powered panel shown at left.. Powered panel shown at left has powerway mounted at factory. Also separate panels by surface type, width
More informationInsolroll Clutch Operated Shades Installation Instructions Installation Instructions
All clutch operated shades are shipped fully assembled and ready for installation. Mounting screws are not provided. Screws for chain guide installation to meet the child safety standards are provided.
More informationWorkbench Instructions for Assembly
Workbench Instructions for Assembly FlexWorks is a trademark of Lista International Corporation. Making Workspace Work is a trademark of Lista International Corporation. Document Number: MD002A3 Print
More informationNEXUS SERIES CABINETS
NEXUS SERIES CABINETS STANDARD BASE ASSEMBLY INSTRUCTIONS Also applies to: Galaxy Series, Nexus Series, Ridgeline Series, Statesman Series, and Waterford Series FOR YOUR INFORMATION: These assembly instructions
More informatione Shelving Technical Manual
e Shelving Technical Manual v.9.17 Components Components 0.375 (10mm) 0.718 (18mm) wall standard 1.25 (32mm) 1.25 (32mm) shelf bracket 0.312 (8mm) fascia (optional) Finish Options Anodized Powder Coat
More informationMODEL No: GSS3030G. Model No:...GSS3030G Overall Size (W x D X H*) x 3000 x 2100mm Roof Type:...Gable *Minimum Wall Height
1. SAFETY INSTRUCTIONS INSTRUCTIONS FOR: GALVANIZED STEEL SHED GREEN 3 x 3 x 2.1m MODEL No: GSS3030G Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used
More informationCROWN IMPERIAL ASSEMBLY INSTRUCTIONS
CROWN IMPERIAL ASSEMBLY INSTRUCTIONS Standard Drawer Box Page 1 of 14 Standard Drawer Box Parts Parts Supplied B C D A E F G Page 2 of 14 Part Letter Part Name Quantity 300-600 Deep Pan A Base Panel 1
More informationBefore Assembling the Storage Wall
Chapter 1 Assembling the Lista Storage Wall Lista provides two types of standard Storage Walls: B251 and B255. The design, construction, assembly, and quality are identical for both types, however, B251
More informationPLM CABINET AND MTL LIGHT INSTRUCTIONS
Robern 701 N. Wilson Ave. Bristol, PA 19007 800.877.2376 PLM CABINET AND MTL LIGHT INSTRUCTIONS General Notes 1. Unpack the cabinet. Check the box thoroughly for all hardware and loose parts as follows:
More informationAssembly Instructions
RoomScape Furniture System March 2013 - Bed Styles bed deck board bed deck board top cap top cap base glide middle side rail frame frame stacking device frame middle lower reinforcement side rail Single
More informationINSTRUCTIONS FOR: GALVANIZED STEEL SHED 3 x 3 x 2.1mtr. MODEL No: GSS3030
INSTRUCTIONS FOR: GALVANIZED STEEL SHED 3 x 3 x 2.1mtr MODEL No: GSS3030 Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions
More informationAngled Side Flush with Panel Face
Identify and sort panels by like sizes, fabrics, surface type (tackable vs hard), and NON- POWERED vs POW- ERED. Non-powered panels ship without a powerway. Powered panels include a powerway. See below.
More information2x Bottom Bracket. 1x Rail Support STEP 1 STEP 2
Level Railing Top Rail Bottom Rail Aluminum Baluster 2x Bottom Bracket 1x Rail Support Kit Includes: 1 - Top Rail (with Baluster Connectors installed) 1 - Bottom Rail (with Baluster Connectors installed)
More informationWorkbench Instructions for Assembly
Workbench Instructions for Assembly Technical Electronic Workstations and Industrial Workbenches Includes: Cabinets Privacy Panels Stringers Bottom Shelves Table of Contents Tools Required for Assembly...
More informationTOOLS REQUIRED Metal Wood Wood and Metal Screws. #16 Drill #12-24 Tap. 1/8 Drill
DEVICES COVERED IN THIS DOCUMENT: 4700S Surface Vertical Rod Device 4700SF Fire Exit Surface Vertical Rod Device TOOLS REQUIRED Metal Wood Wood and Metal Screws Sex Bolts #7 Drill ¼ -20 Tap #16 Drill #12-24
More informationOXYGEN INSTALLATION. Revision date
12345 1 Hardware List 12345 Flat head wood screw #9 x 7/8 long with #2 Phillips drive, silver Used to attach surfaces and end panels Hex set screw ½-13 x 2 long with 1/4 hex drive, black Used on Legs Hex
More informationBlackout Instructions. 4 R-Series Fascia Installation Outside Mount
Blackout Instructions 4 R-Series Fascia Installation Outside Mount 1 Components Needed page 3 Tools Needed page 4 System Diagram page 5 Instructions Step 1: Install Brackets. Page 6 Step 2: Mount Back
More informationLED Omni Wand System A Simple Fixture That Is Multi-Functional
Ultra Bright Dimmable Versatile 1-800-631-8375 www.outwater.com Slim Outwater Plastics Industries, Inc. Packs A Bright Punch In A Small Profile Introducing... LED Omni Wand System A Simple Fixture That
More informationFor installation assistance, contact SARGENT at DOORS SHOWN HERE SWING IN FOR ILLUSTRATION PURPOSES ONLY.
SARGENT Installation Instructions for LP8600 x LR8600 & 12-LP8600 x 12-LR8600 Series Low Profile Panic and Fire Exit Devices on Double Egress & Double Doors or LS8600 & 12-LS8600 Low Profile Exit Device
More informationTIP FOR GETTING STARTED
Tip for getting started TIP FOR GETTING STARTED Be careful not to drill into any electrical wires, ductwork, plumbing or other damagable components. If you have any questions on the locations of these
More informationHampshire Buffet Cabinet with Glass Doors
Thanks for shopping with Improvements! Hampshire Buffet Cabinet with Glass Doors Item #55919 Note: Read these instructions carefully before assembling. Tools required: Philips screwdriver (not included).
More informationFlexFrame - Storage Components and Skins
FlexFrame - Storage Components and Skins 1/4 Square Drive Ball-Point Hex-Bit Socket 1/8 Short Hex, 1-1/2 Overall Length McMaster Part # 54075A44 Table of Contents Topic Page Storage Components 2 General
More informationKwik-Lock. Installation Instructions. Attention Dealers: Please give this owners manual to the customer when the product is delivered.
Serving the Truck & Trailer Industry Since 1944 Installation Instructions Attention Dealers: Please give this owners manual to the customer when the product is delivered. Call 800-535-9545 www.aeroindustries.com
More informationWORKSURFACE ASSEMBLY
WORKSURFACE ASSEMBLY Notes: Worksurfaces should be installed last. This provides easy access to Core/Walls. For Double Sided configurations, repeat the following sequences for the opposite side of the
More informationL182 - Installation Sheet Modular Wine Rack ( Wall Mount )
Modular Wine Rack ( Wall Mount ) 1A 1B 2B 2A Cross Bar Options: 1A 2A 1B 2B Modular Wine Rack ( Wall Mount ) Parts Rail LED arm modules Wine bottle cross bars Rail cover Setscrew cover 1) Drill holes and
More informationSystem 3000 specifications
System 3000 specifications Scope: Materials: Type of Bookstack: This specification covers delivery and installation of steel library shelving of the bracket type. Height, depth and accessories shall be
More informationINSTALLATION AND CARE INSTRUCTIONS
INSTALLATION AND CARE INSTRUCTIONS Vertical Applications Honeycomb Shades 52 C8-10-3401 Rev 2/14 CONTENTS Introduction...2 Before You Begin...3 Vertical Application Parts Overview...4 Materials Required...5
More informationSection 9: Finishing Touches - Other Decor Units
Section 9: Finishing Touches - Other Decor Units Butler Sink Units Important: This unit is designed to be used with either This unit is always used between other units. Level the units. Fix together and
More informationHZ104100TX Black Contemporary Bar Cabinet Assembly Instructions PO#:
HZ104100TX Black Contemporary Bar Cabinet Assembly Instructions For assistance with assembly contact: Southern Enterprises, Inc. customer service 1-800-33-09 service@seidal.com www.seidal.com PO#: Page
More informationAssembly Instructions
Selling Station Assembly Instructions View from above without top A B C D Rounded finished corners on A & D Square unfinished 3-sides on B & C Selling Station Components (2) 2' x 6' Side s Have a channel
More informationCDAS CDAS39 SHELF UNIT
BY CDAS CDAS39 SHELF UNIT 0708 IMPORTANT! Assembly may require the assistance of another person. Before you begin assembly: READ THE DIRECTIONS all the way through one time. This will speed up the process
More informationInstallation And Care Instructions. Vertical Honeycomb Shades
Installation And Care Instructions Vertical Honeycomb Shades Rev 5/2013 Table Of Contents Getting Started... 3 Parts Overview... 4 Materials Required... 5 Tools Required... 6 Outside Mount Installation...
More informationSetup. The Faraday Cage is available in two types of configurations. Cage for mounting to a full perimeter enclosure on series tables.
Faraday CageSetup, 2017 Setup The Faraday Cage is available in two types of configurations. Cage for mounting to a full perimeter enclosure on 63-500 series tables. Cage with a base plate for use on a
More informationi-puc Merchandising & Display System Creative Display Solutions
i-puc Creative Display Solutions i-puc Discreet in appearance and amazingly versatile in application, this cleverly engineered display program provides a distinctive innovation in puck based merchandising
More informationDisplay-Top Apothecary Cabinet. Assembly Instructions. Page 1
Display-Top Apothecary Cabinet Assembly Instructions Page 1 Display-Top Apothecary Cabinet Parts List Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean,
More informationMirage Installation Manual
Mirage Installation Manual General Information This installation manual provides necessary information for the safe installation of the Mirage product. WARNING: Failure to follow the instructions in this
More informationVersion 1.0. Forbes Credenza File Cabinet.
Version 1.0 Forbes Credenza File Cabinet www.fantasticfurniture.com.au Enjoy Your purchase from Australia s Best Value Furniture Store www.fantasticfurniture.com.au PAGE 2 Assembly checklist Read through
More informationSection 1. Kitchen installation. Base cabinets
Section 1 Kitchen installation Base cabinets Pre-build - Cabinet leg... page 16 Pre-build - Alternative cabinet leg... page 18 Pre-build - Cabinets.... page 19 Pre-build - Corner base cabinet centre upright
More informationTransition Range Installation, Care & Adjustment Instructions
Introduction The following instructions will enable you to complete the final assembly and adjustment of your new furniture. Hardware Box Each of the cabinets contains a Hardware box that contains all
More information96 (Standard Length)
Setbacks 96 (Standard Length) Bike Files may be lined up end to end to fill the available space. A 36 aisle should be left between the ends of bikes in racks facing one another. 36 aisle 50 Installation
More informationInstallation Instructions
by Plato Woodwork Installation Instructions Plato Woodwork, Inc. 200 Third Street SW P.O. Box 98 Plato, MN 55370 www.platowoodwork.com 800.328.5924 SECTION GUIDE GETTING STARTED PAGE # Installation Methods...
More informationTAMBOUR DOOR SYSTEMS. Construction Automotive Industry
TAMBOUR DOOR SYSTEMS C3 Installation instructions www.rehau.com Construction Automotive Industry C3 Parts Overview 8 1 Slats 2 Handle 6 7 3 Handle gliders 4 Track cover 5 1 9 5 Track base 6 End caps 4
More informationCABINETRY Assembly Instructions
www.hdicabinetry.com Assembly Instructions TABLE OF CONTENTS Category Page(s) Section 1: Framed Series Base Cabinet Instructions Wall Cabinet Instructions Easy Reach Cabinet Instructions 1.01-1.04 1.05-1.06
More informationHZ8864A0TX / HZ8864B0TX. Metal/Glass Sliding-Door Display Cabinet. Assembly Instructions PO: Each shelf supports up to lb.
HZ8864A0TX / HZ8864B0TX Metal/Glass Sliding-Door Display Cabinet Assembly Instructions For assistance with assembly, contact: Southern Enterprises Inc. Customer Service: 1-800-633-5096 service@seidal.com
More informationBathroom Installation Guide
Bathroom Installation Guide Please read instructions carefully and check products before starting. Products should be fitted/installed by an experienced and competent fitter, failure to do so may invalidate
More information4Post and 2Post Rails for Dell PowerEdge R810
4Post and 2Post Rails for Dell PowerEdge R810 Patent(s) Pending 4Post Page 2 2Post Center Page 4 2Post Flush Page 6 Installation Instructions Kit P/N: 109-1737 109-1841 Kit Contents Kit Contents: (1) Right
More informationLevel Railing. Installation Guide. v2.5 W W W. S O L U T I O N S A L U M I N U M. C O M
Level Railing Installation Guide Top Rail Bottom Rail Aluminum Baluster 2x Bottom Bracket 1x Rail Support #909915 Kit Includes: 1 - Top Rail (with Baluster Connectors installed) 1 - Bottom Rail (with Baluster
More informationORTOP Modular Robot v3.0 Arm Assembly
Base Plate Assembly Parts Needed: Arm Assembly BAG 1 2 Socket Head Cap Screw, 1-1/4" 2 Socket Head Cap Screw, 1/2" 2 Button Head Cap Screw, 3/8" 6 Nuts 1 Gear Hub Spacer 1 Flat Building Plate 1 Single
More informationQ-DESIGNS BY Q-RAILING. Q-designs by Q-railing
Q-DESIGNS BY Q-RAILING CONTENT 2 Q-DESIGNS BY Q-RAILING WE DESIGN RAILING SYSTEMS Q-HANDRAIL Q-LINE SQUARE LINE QUICKRAIL EASY GLASS TOP EASY GLASS EVOLUTION PROJECTS What can you expect from Q-railing?
More informationwww.hafeleindia.com www.hafeleindia.com Silver Gold Rose Gold Graphite Dark Bronze PROFIN : ONE RANGE. MANY SOLUTIONS. 2. Stack Modular Shelving Pg. 23-32 3. Rail Door Profiles Pg. 33-41 1. Gola Profiles
More informationROBERN PLM 3 DOOR BATH CABINET INSTRUCTIONS GENERAL NOTES FOR MODELS PLM3030 & 3630
ROBERN PLM 3 DOOR BATH CABINET INSTRUCTIONS GENERAL NOTES FOR S & 3630 1. UNPACK THE CABINET. CHECK THE BOX THOROUGHLY FOR ALL HARDWARE AND LOOSE PARTS PACKED AS FOLLOWS: A. CABINET B. HARDWARE BAG C.
More informationMANUAL e130. Wallstation
MANUAL 07.29.13 e130 Wallstation The Enovate Medical e130 Wallstation was designed to set a new standard in quality. Enovate Medical s goal is to provide a wallstation that is ready for years of use,
More informationDesign Manufacture Installation
Design Manufacture Installation Counters... Curved reception counter wood grain carcass and a laminated worktop. Curved reception counter laminated wood grain carcass and a raised glass worktop. Curved
More informationINSTALLATION INSTRUCTIONS KK-K9-F14-K K9 KIT FOR FORD EXPEDITION
INSTALLATION INSTRUCTIONS KK-K9-F14-K-32 32 K9 KIT FOR 2003-2016 FORD EXPEDITION TOOLS REQUIRED: Power Drill Drill Bit Set Standard & Metric Socket Sets Phillips Screw Driver Open End Wrench Set Wire Cutters
More informationTransit Connect Full/Half Installation Instructions
GATHER THESE TOOLS FOR ASSEMBLY & INSTALLATION 7/16 wrench, T45 Torx socket, 7/16 socket, 3/8 drive ratchet - 3/8 socket One 1/8 square end driver bit provided - Electric drill/driver/18v cordless One
More informationROS-APT Caucus Plinth Table with Trough Note: Details apply, however the actual configuration of your table may vary from what is depicted here.
ROS-APT Caucus Plinth Table with Trough Note: Details apply, however the actual configuration of your table may vary from what is depicted here. Parts List - Tables Tops, Top Insert Panels and Base panels
More informationFollow these steps to assemble your Hiddenbed 1 Construct the 3 main parts 2 Assemble them together 3 Add a mattress. YOUR HIDDENBED IS READY! 2
Mounting Instructions Item No.: 271.97.300 Hiddenbed Furniture parts supplied by the customer Follow these steps to assemble your Hiddenbed 1 Construct the 3 main parts 2 Assemble them together 3 Add a
More informationPantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or oth
88 5076 691 Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occurring to the parts. We have taken great
More informationOffice Partitions WARNING. Assembly Instructions. Customer Service A S S E M B LY HARDWARE H1 H2 H3 H4 H5 H8 H9 H10 H11 H12
Customer Service 1-800-645-2986 Assembly Instructions WARNING In order to prevent structural failure, instability, t i p - o v e r, and/or serious injury, please follow i n s t ructions care f u l l y.
More informationNimbus Home Office by
Nimbus Home Office by Nimbus Home Office Furniture A range of modular and freestanding pieces to provide a flexible solution to your home office needs. Made from European oak and selected oak veneers,
More informationMast Solutions Document/Installation Manual
Mast Solutions Document/Installation Manual The Mast family from Veritas is the perfect answer to movable and stationery partitions and room dividers, and hinged doors. This system is extremely versatile
More informationInstallation Instructions For TruLine 1.6A 24VDC
2014 Pure Lighting. All Rights Reserved. Installation Instructions For TruLine 1.6A 24VDC INS# 902-TL1.6A-07 1718 W. Fullerton Ave Chicago, IL 60614 Tel: 773-770-1195 Fax: 773-935-5613 www.purelighting.com
More informationMobileTrak5 Installation Instructions
MobileTrak5 Installation Instructions PLEASE OPEN ALL BOXES & CHECK TO MAKE SURE YOU HAVE ALL PIECES REQUIRED READ ALL INSTRUCTIONS BEFORE STARTING Tools Required for Assembly 7/16, 1/2 Wrench Phillips
More informationWK9 WORKTOP KIT Assembly Guide
WK9 WORKTOP KIT Assembly Guide Tools and supplies needed for assembly: Cordless drill with #2 Phillips bit 5/16" drill bit #2 Phillips screwdriver Bubble level Sharp felt tip marker 3/8" and 7/16" wrenches
More informationS H E L V I N G. More Value. More Options. More Quality ... A N D I T A S S E M B L E S I N A S N A P!
A U R O R A Q U I K - L O K S H E L V I N G More Value More Options More Quality...... A N D I T A S S E M B L E S I N A S N A P! M O R E S T O R A G E, M O R E S P A C E Versatile Aurora Shelving for
More informationTour Worksurfaces and Supports
R Tour Worksurfaces and Supports Table of Contents Topic Page COLUMN SUPPT SUPPT FRAME TIE BRACKET TO COUNTER Worksurface to Shelf Attachment 2 Worksurface to Counter Attachment Bracket 3 Worksurface Tied
More informationInstallation Instructions Edge Storage System
Installation Instructions Edge Storage System IMPORTANT: Product is packed on pallets by individual bank. Do not mix components from different pallets together. Use the Specific Part List to determine
More informationLinear Hook- on Worksurfaces
Linear Hook- on Worksurfaces Linear Hook-On Worksurfaces come in three depths and seven lengths. Different worksurfaces have different reqirements for installation that are outlined below. 27 inch deep
More informationapplication guide WORKSURFACE SUPPORTS WORKSURFACE SUPPORT BASICS PLANNING WITH WORKSURFACE BRACKETS... 43
application guide STRUCTURE FRAME BASICS.................................. 18 PLANNING WITH FRAMES.......................... 19 VERTICAL SUPPORT BASICS........................ 20 INTERMEDIATE HORIZONTAL
More informationPrivacy Wall Glass Selections - Polished Edge Slider Door
Privacy Wall Glass Selections - Polished Edge Slider Door 3/6" HEX BIT PUTTY KNIFE #2 ACR BIT SUCTION CUP HOLDERS DOOR LEAF: Satin Tempered Clear Tempered LOCTITE 425 SIDE LIGHT ETCHED GLASS STYLES: Satin
More informationDeck Mount Installation with Bench
Deck Mount Installation with Bench 1. Mark track with square. 2. Cut tracks with saw. 3. Drill ¼ hole (if needed.) 4. Countersink track. 5. Countersink all track 6. File all track ends. ends. 7. Lay out
More informationspine desks UNDERSTANDING SPINE DESKS SPINE DESK BASICS MODESTY PANEL & GABLE BASICS PLANNING WITH SPINE DESKS...
UNDERSTANDING SPINE DESKS........................ 66 SPINE DESK BASICS................................. 70 65 MODESTY PANEL & GABLE BASICS...................... 75 65 PLANNING WITH SPINE DESKS.........................
More informationSentinel Series Cigar Humidor End Tables
Sentinel Series Cigar Humidor End Tables Assembly Instructions Models: Sentinel 500, 1000 and 1500 Style: Contemporary SENTINEL ASSEMBLY INSTRUCTIONS Congratulations! You have purchased a superior cigar
More informationInstallation Guidelines
Page 1 Tools You ll Need 4 ft. Carpenter s level Chalk line (to mark U channel locations) Cordless drill/nut driver Caulking gun Chop saw with a metal cutting blade on it (required to make accurate and
More informationC. Side Panel 1 pc. B. Side Panel. 1 pc. J2. Shelf. 4 pcs. Adjustable Pin 24 pcs. (+1 extra) M3.5x16 Wood Screw 20 pcs. (+1 extra) 2 pcs.
IMPORTANT 20 05180 0307 Hutch Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly
More informationINSTALLATION AND CUSTOMER CARE INFORMATION FOR SC FREESTANDING STERILIZATION CENTERS
INSTALLATION AND CUSTOMER CARE INFORMATION FOR SC144-200 FREESTANDING STERILIZATION CENTERS General Information: Many Artizan Design Free-standing Sterilization Centers are custom designed and built to
More informationED1300/1300F SERIES CONCEALED VERTICAL ROD DEVICE INSTALLATION INSTRUCTIONS
ED1300/1300F SERIES CONCEALED VERTICAL ROD DEVICE INSTALLATION INSTRUCTIONS Ver.2 1300 SERIES CONCEALED VERTICAL ROD DEVICE Top Strike Latch Screws Strike Screws Release Plunger Top Latch Plunger Screws
More informationTop Closure Kit Accessory for Music Library System
Assembly Instructions Top Closure Kit Accessory for Music Library System Contents Required Tools.....................................2 Installation Requirements............................2 Fasteners -
More informationINSTALLATION INSTRUCTIONS GT1006E TALL CABINET, RESIN WALL MOUNT
INSTALLATION INSTRUCTIONS GT1006E TALL CABINET, RESIN WALL MOUNT CARTON CONTENTS PART 1 - CABINET ASSEMBLY QUANTITY DESCRIPTION CARTON #1 1 CABINET COMPONENTS PART 2 - WALL MOUNTING QUANTITY DESCRIPTION
More informationParts Included: Tools Required: Canvas Office Landscape Interiors Off Module 90 Connector Kit Installation and Disassembly for Recycling Instructions
Y Parts Included: Canvas Office Landscape Interiors Off Module 90 Connector Kit Installation and Disassembly for Recycling Instructions FT127.A N Shim A Light Seal B Foam Light Seal C G H Double-Face Tape
More informationHow To Measure Your Finished Opening
3000 Series Bifold Doors How To Measure Your Finished Opening MEASURE FROM RIGHT TO LEFT 2 PLACES (WIDTH) MEASURE FROM TOP TO BOTTOM 2 PLACES (HEIGHT) Tools Required for Assembly: Tools Needed: Phillips
More informationINSTALLATION. For more information on this product or to order samples call or visit our website at builddirect.com.
Page 1 Page 2 Page 3 Page 4 Page 5 1. Door Assembly: Step A: Attach part #34 to part #35 with screws #65/67. Step B & C: Attach part# 34.35(36) to part #33 with two #70 screws. Step D: Insert door bottom
More informationMH60/MH72 DESK HUTCH IMPORTANT!
MH60/M2 DESK HUTCH IMPORTANT! Assembly may require the assistance of another person. Before you begin assembly: READ THE DIRECTIONS all the way through one time. This will speed up the process and help
More informationGE Monogram. Installation. Instructions. 27" Built-In Ovens. Models ZEK757WW ZEK757BW ZEK737WW ZEK737BW
GE Monogram Installation Instructions 27" Models ZEK757WW ZEK757BW ZEK737WW ZEK737BW CAUTION WARNING Before you begin Read these instructions completely and carefully. IMPORTANT: Save these instructions
More informationModels Royal Oak and Royal Maple
Installation Instructions Models Royal Oak and Royal Maple DESIGNERS MANUFACTURERS 21 Avenue Hall Valencia, CA 9 (1) 27-77 FAX: (1) 27-4907 or visit our website at: www.cwdoor.com ILLUSTRATED PARTS BREAKDOWN
More informationWalk-in Configurations
Walk-in Configurations Includes Wall-to-Open, Corners, and Corner Rounder Bars INSTALLATION INSTRUCTIONS Tools needed: Tape measure, level, pencil, #2 Phillips head screw driver or power drill with a 6"
More informationMounting Brackets for 8450 Drawer Slides KV Front Bracket 20 $1.30 KV P Rear Bracket 20 $5.20
Mounts bottom or side 1/2 clearance plus 1/32 0 lb. load with model Almond finish Integrated soft-close mechanism 32mm hole pattern with direct access mounting Lever disconnect for easy drawer removal
More informationA - Assembly Hardware Kit. Tools Needed: Phillips Screwdriver. G - Swiveling Bracket x 2 N - Upper Cover Panel x 1. F - Vertical Column x 1
(A4) 1/4-20 5mm Screw (x4) () 5/16-18 x 48mm Screw (x8) (A10) Neoprene Strip (x4) (A7) Leveler lide (x4) () 5/16-18 0mm Screw (x10) (A1) 4mm Allen Whrench (x1) (B1) M5 5mm Machine Screw (x4) (B2) M6 5mm
More informationOctagon Vinyl Gazebo Assembly Instructions For 10 & 12 Models
Octagon Vinyl Gazebo Assembly Instructions For 10 & 12 Models Toll Free: 866.768.8465 Hours: 9-5 Monday-Friday EST www.homeplacestructures.com Package ships as shown revised 04/29/09 Vinyl Gazebo Assembly
More informationOn the Right Track. Installation Guide
On the Right Track Installation Guide Table of Contents General Introduction Introduction...1 Local Building Codes...1 Tools Required...1 Additional Assistance...1 Parts Glossary Components...2 Track...5
More informationPreference Collection 5580 Treatment Console INSTALLATION GUIDE
Preference Collection 5580 Treatment Console INSTALLATION GUIDE 0 WARNING Failure to install the 5580 as described in this installation guide may cause the unit to collapse, resulting in serious injury
More informationASSEMBLY INSTRUCTIONS. enook Pro
ASSEMBLY INSTRUCTIONS enook Pro Product enook Pro for Monitors, 36w Part# EPM3616zz/xx Anthro Corporation 10450 SW Manhasset Dr. Tualatin, OR 97062 Toll-free: 800.325.3841 Fax: 800.325.0045 email: sales@anthro.com
More informationTrack Rack. * Track Racks are not lockable
The Track Rack s unique staggered, sliding hook design creates the greatest parking efficiency while still providing easy access to any particular bike. When adding or removing a bike to the rack, simply
More informationINSTALLATION AND CUSTOMER CARE INFORMATION FOR SC FREESTANDING STERILIZATION CENTERS
INSTALLATION AND CUSTOMER CARE INFORMATION FOR SC120-200 FREESTANDING STERILIZATION CENTERS General Information: Many Artizan Design Free-standing Sterilization Centers are custom designed and built to
More information