MANET. Technical manual for ordering and installation. Single-point fixings for interior applications

Size: px

Start display at page:

Download "MANET. Technical manual for ordering and installation. Single-point fixings for interior applications"

Neil Higgins
5 years ago
Views:

1 MNET Technical manual for ordering and installation Single-point fixings for interior applications

onsequently, flexible glass partitions and doors are becoming the preferred solution for internal spatial division.

2 DORM MNET Glass design system MNET ONEPT MNET OMPT Sets Today s approach to office design tends to be generously appointed, open-plan layouts. One of the basic underlying principles in this regard is that, in order to be effective in business, you need a clear view of everything that is happening. onsequently, flexible glass partitions and doors are becoming the preferred solution for internal spatial division. Thanks to the flexible modularity of the system, DORM MNET offers architects and specifiers a free hand in creative almost bespoke design with space, vision and light as a foundation. The basic component is the single-point fixing which is countersunk into the glass and provides for a perfectly flush finish in all applications. In addition to the countersunk version, however, the system now also offers a new alternative, i.e. whereby the single-point fixing is clamped to the glass surface. When using these mounting elements, glazing systems of 8 mm thickness as well as the usual 10 and 12 mm thicknesses are available as standard applications for sliding doors. Other glass thicknesses may also be available, and the installation of timber doors is likewise possible. Design modifications enable the free combination of various roller carrier and track rail types. Further details can be found in the relevant introductory pages. djustable angle connectors provide for reliable attachment to existing structural components or glass-to-glass combinations, with integrated pivoting and sliding door elements complimenting the system. Just as visually effective are the MNET OMPT standardised sets from the DORM MNET family. These facilitate single, fast planning of the more popular system types with 8, 10 or 12 mm glass for doors and 10 and 12 mm glass for overpanels and sidelights. The MNET OMPT sliding door sets will be delivered with roller carrier in LSSI design. Optional accessories are available for increased design variety within the individual sets. The system components come with numerous adjustment possibilities in order to ensure problem-free installation of the sliding, double action or single action doors. Wall abutment profiles/ connectors (for attaching the overpanel and sidelight screens to the existing structure) may need to be provided. 4 10/07

MNET MIENT The remarkable MNET MIENT range of hardware breathes new life into furniture creations.

Exacting in terms of its concept and engineering excellence, this hardware system is quite unique in a number of ways - not least because the stainless steel fittings are not concealed, serving

t the heart of the system is the rod - the connecting element that also functions as a support, track rail or pivot.

3 MNET MIENT The remarkable MNET MIENT range of hardware breathes new life into furniture creations. Sliding, pivoting, retention this system transforms the functional into the stylish, affording the designer almost unlimited scope for creativity. Exacting in terms of its concept and engineering excellence, this hardware system is quite unique in a number of ways - not least because the stainless steel fittings are not concealed, serving instead to accentuate exceptional furniture design. The MNET MIENT system approach is also reflected in the minimal number of basic components incorporated in the overall range. t the heart of the system is the rod - the connecting element that also functions as a support, track rail or pivot. Shelf supports and single-point fixings (flush-mounted in the glass) are further components in this kit system with its unique fitting methods, application range and modularity. MNET MIENT is the ideal aesthetic partner not only to glass surfaces but also to fine wood carcass furniture - in offices, foyers, kitchens, living rooms and bedrooms. Hardly surprising, then, that this industrial-quality product range is encountered not only in the project hardware sphere but also, increasingly, in private homes as well. Sliding Pivoting Retention ll the elements including the pull handles are available in an elegant stainless steel finish (ISI 0). In applications involving corrosive atmospheres, many fittings are also available in stainless steel ISI 16L. warded with the design prize red dot 2002 Needless to say, all DORM systems are protected by proprietary rights worldwide. We will be glad to provide you with information concerning relevant patents, e.g. PT/EP0/04299, PT/EP01/042 etc. on application. 11/06

4 DORM MNET ONEPT

5 MNET ONEPT ontent Single-point fixing 8 onnection system 10 Pivoting door system 14 Sliding door system 22 Pull handles/door knobs 4

The three-dimensional adjustability incorporated within the fitting ensures ideal compensation for structural and drilling tolerances.

6 MNET ONEPT Single-point fixing Single-point fixing series S2/ The basic component within the MNET system is the single-point fixing. Rather than cylindrical bore in the glass, this has a tapered countersunk bore for a perfect seated fit to the glass. These give a flush finish of the single-point fixing in all applications. The three-dimensional adjustability incorporated within the fitting ensures ideal compensation for structural and drilling tolerances. onstraint-free transmission of all the forces acting on the glass to the substructure is also ensured. omponents 1 lip-on cover 2 Pin internal thread onical sleeve 4 Gasket Fixing 6 djustment screw Threaded rod M8 with small head (eg DIN 6912). Length and type to suit wallplug. Wallplug on site to suit wall construction. Installation and adjustment 1 2 -dimensional adjustment perture for post-installation adjustment of screw Post-installation adjustment of ± 2 mm horizontally and vertically by rotating the oblong hole. 4 6 djustment screw allows offset from wall to be altered depending on type of fitting. Transfer the drilling points from the installation drawing to the wall. Drill anchor holes for wall plugs. Undo adjustment fastener and secure to the wall. Only lightly tighten fastener so that it can still be moved. Mount the fixing and washer and fit the glass. Undo the adjustment fastener and then secure in final position. lign single-point fixings and secure with grub screw. Fit tapered nut and clamping ring and tighten with special wrench (tightening torque 1 Nm). lip on covers. 8 11/06

7 Type and ordering information Ø 2 Ø Ø 2 Ø Ø 2 Ø Ø 2 Ø Glassthickness Glassthickness Glassthickness Glassthickness 6 adjustable adjustable adjustable not adjustable Single-point fixing, offset adjustable mm Single-point fixing, offset adjustable mm Single-point fixing, offset adjustable mm Single-point fixing, offset 6 mm not adjustable 10 mm: rt. No mm: rt. No mm: rt. No mm: rt. No mm: rt. No mm: rt. No mm: rt. No mm: rt. No mm: rt. No mm: rt. No mm: rt. No mm: rt. No mm: rt. No mm: rt. No mm: rt. No mm: rt. No mm: rt. No mm: rt. No mm: rt. No mm: rt. No /06 9

8 MNET ONEPT onnection system onnection system The system approach is very much in evidence in the case of the interconnecting components. Elements such as clamping and angle connectors of various designs and also interconnecting fasteners of various lengths can be combined in order to attach glass of different thicknesses at any required angle to the floor, to ceilings, to walls and to plinth supports. Single-point fixings flush with the glass are also used for this interconnection and glass-to-glass system. Tolerances are compensated by sloted holes in the interconnecting fasteners Ordering information 1 Pivoting glass clamp 8-12 mm rt. No Glass thickn mm rt. No Glass thickn mm rt. No Pivoting wall fixing rt. No olumn eiling/floor fixing rt. No lamping connector 8-12 mm rt. No mm 82 mm Length 2. mm rt. No mm 10 mm Length 60 mm rt. No Length 82 mm rt. No Length 10 mm rt. No /08

9 onnection system Glass/Glass onnector for double panel Ordering information glass/glass 8-12 mm glass thickness 2. mm rt. No Glass/Glass ø6 ø2 ø20 60 mm rt. No mm rt. No / 60 / 82 / 10 mm 10 mm rt. No omponents and assembly of the glass fixing see page / 60 / 82 mm Glass 4 omponents and assembly of the wall fixing 120 adjustable via oblong hole Glass 9 grub screw 10 Threaded rod M8 with small head (e.g. DIN 6912). Length and type to suit wallplug. ø dimensional adjustment 2. 8 ø 2 adjustable via oblong hole ø 6 Wall onnecting rod see page 10 Wallplug on site to suit wall construction. glass/wall 8-12 mm glass thickness 2. mm rt. No mm rt. No mm rt. No onnector for glass thickness 8-12 mm ISI 0 rt. No ISI 16L rt. No omponents 1 lip-on cover 2 onnecting bolt onical collar 4 onical sleeve Gasket 6 Pivoting clamp 7 onnecting bolt 8 to suit length 9 onnecting bolt 10 Pivoting clamp 11 Fixing plate 11/06 11

10 MNET ONEPT onnection system onnection system Ordering information with clamping disc lamping connector 8-12 mm rt. No Single-point countersunk orner connector 90 Glass/ceiling, Glass/floor connection omponents/ Installation or steel cable 1 2 ø20 ø mm (only supporting function) rt. No eiling fixing (bearing function) 8-12 mm countersunk rt. No clamping disc rt. No omponents 4 adjustable via oblong hole 1 onnecting bolt Hanging glass from the ceiling is permissible where there is other support for the glass sheet. 2-dimensional adjustment Threaded rod M8 with small head (eg DIN 6912). Length and type to suit wallplug. Grub screw Wallplug on site to suit wall construction Pivoting clamp onnecting bolt 4 Gasket Pivoting clamp 6 Fixing plate 7 olumn lip-on cover Height adjustment via grub screw Single-point fixing countersunk Single-point fixing clamping disc Fixing with cheesehead screw DIN 7984 M10 x..., or oval-head wood screw DIN 7996 M8 x... depending on ceiling fixing requirements and wallplug type (by others) 12 11/06

11 Glass preparation for single-point fixings and corner connections For ESG and VSG out of ESG. Recommended centres for fixed glazing element max. 800 ±0. max. 800 ±0. ±0. ountersunk bore for countersunk single-point fixings 90 ø ø26 ylindrical bore for clamping disc single-point fixings ø Dimension Dimension 90 Dimension ngle Wall Dimension Dimension 2. Plan view orner connectors Glass/Glass ngle Dimension orner connectors Dimensions in mm orner connectors Glass/Glass ngle / ngle 90 Length of Dimensions for 10 mm glass thickness (consider variants for other glass thicknesses). / / / 0 Length of Dimensions for 10 mm glass thickness (consider variants for other glass thicknesses). / / / 67/6 72/70 87./86 lamping connector 10 Ensure compliance with minimum glass/bore clearances as per glass manufacturer recommendations ylindrical bore Ø1 60 orner connector glass/ceiling orner connector glass/floor eiling fixing (bearing) eiling eiling KS Floor Vertically adjustment ±2. Glass preparation with a tolerance of max. ± 0. mm is recommended. 11/06 1

Single-point fixing serie S32/35

Single-point fixing serie S32/35 MNET Single-point fixing Single-point fixing serie S2/ The basic component within the MNET system is the single-point fixing a basic rather than cylindrical bore in the glass, has a tapered countersunk