Sliding Door System Terra M ST.1062.TM. Premium Edition
|
|
- Ariel Haynes
- 6 years ago
- Views:
Transcription
1 Sliding Door System Terra M ST.1062.TM
2 Sliding Door System TERRA M ST.1062.TM 2 3
3 Sliding Door System TERRA M ST.1062.TM Terra M is perfect for installations without a load-bearing ceiling. The roller is positioned centrally beneath the glass door, held in place by two stainless steel half-shells. This roller element has two faces: one side underlines the technical aspect, while the other hides its workings beneath a smooth surface. The runner rail can be bolted or glued to the floor or set into a recessed channel (variation). Door weight max. 155 kg Standard finish is decorative satin stainless steel. Partly polished, completely polished or PVD coated finishing (copper, gold or black) is available on request. Feel free to contact us, if you want to learn more about the Terra M system. Terra M glass groove: Floor rail measurements: Optional: recessed floor rail at least 100 mm For Terra systems with the rails flush-mounted to the floor, the floor rollers are supplied suitably tailored! 4 5
4 Sliding Door System TERRA M ST.1062.TM 6 7
5 Sliding Door System TERRA M ST.1062.TM 8 9
6 Sliding Door System TERRA M ST.1062.TM 10 11
7 Sliding Door System TERRA M ST.1062.TM - Picture displays the backside of the wheel with concealed screws (scenario for a floor recessed rail)
8 Sliding Door System TERRA M ST.1062.TM 14 15
9 R8 GUIDE PROFILE FOR TERRA SYSTEMS, ONE-PART ONE-PART GUIDE PROFILE INSTALLATION OPTIONS Variant 1: Standard ceiling fastener Variant 2: Standard wall fastener MWE guide profiles are always made of stainless steel! The profiles can be adjusted to glass thicknesses on an individual basis Profile ends can be closed with a welded lid of stainless steel, thus providing a clean end The surface finish is provided to a quality of grain 600 (jewellery quality) (mirror finish possible) If installation is onto a wall or glass, the holes on the guide profile are covered with clip lids. Fastening with angle (in the scope of supply): no visible screws from the front! ST.4040.TE Wall / ceiling guide profile, one-part The guide profile is divided from a length of 3 metres! One-part guide profile One-part guide profile Wall fastener for one-part guide profile Glass fastener for one-part guide profile Stopper for one-part guide profile Variant 3: ST.2100.TE wall fastener Variant 4: ST.2176.TE.S glass fastener Delivery includes clip lid ST.2100.TE Incl. distance spacer sleeve, wall distance in accordance with customer information ST.2176.TE.S ST.3060.TE Glass fastening with spacer sleeves Different glass spacer sleeves to compensate for e.g. skirting boards or frames in 5 mm steps available. Give base measurement / wall distance when ordering! Wall angle for one-part guide profile Lid for one-part guide profile Mirror-finished surfaces ST.2100.TE wall fastener with spacer sleeves Different wall spacer sleeves to compensate for e.g. skirting boards or frames in 5 mm steps available. Give base measurement / wall distance when ordering! For a closed front side (welded) Mirror finished as part of manufacture ST.2100.TE.W ST.4060.TE Price: 45 % surcharge per component / system One-part guide profile One-part guide profile 16 17
10 TWO-PARTS GUIDE PROFILE FOR TERRA SYSTEMS WITH MWE SOFT STOP TECHNOLOGY GUIDE PROFILE INSTALLATION OPTIONS, TWO-PARTS WITH MWE SOFT STOP TECHNOLOGY Variant 1: Standard ceiling fastener Variant 2: Standard wall fastener MWE guide profiles are always made of stainless steel! The profiles can be adjusted to glass thicknesses on an individual basis Profile ends are closed with a welded lid as standard, thus providing a clean end The surface finish is provided to a quality of grain 600 (jewellery quality) (mirror finish possible) Advantage of a two-piece guide profile: no visible screws from the front! Advantage of a two-piece guide profile: no visible screws from the front! ST.4053 Wall / ceiling guide profile, two-parts, for MWE soft stop technology R8 Door Türblattbreite leaf width // The guide profile is divided from a length of 3 metres! Two-parts guide profile Two-parts guide profile MWE soft stop technology for Terra systems Variant 3: ST.2100.TE.S wall fastener Variant 4: ST.2176.TE.S glass fastener MWE standard: The delivery of the two-part guide profiles takes place with the lids welded for closed front sides. Caution: Max. door leaf weight 75 kg ST.3660 Incl. fasteners, dampers, catches and grid plates Glass fastener for two-parts guide profile Wall fastener for two-parts guide profile Caution: Please indicate if closed front sides are not necessary (e.g. niche area) Mirror-finished surfaces ST.2100.TE.S wall fastener with spacer sleeves Different wall spacer sleeves to compensate for e.g. skirting boards or frames in 5 mm steps available. Give base measurement / wall distance when ordering! Glass fastening with spacer sleeves Different glass spacer sleeves to compensate for e.g. skirting boards or frames in 5 mm steps available. Give base measurement / wall distance when ordering! If the wall distance cannot be compensated for, it can be installed onto glass without a distance spacer. Advantage: small gap dimensions! Incl. distance spacer sleeve, glass distance in accordance with customer information Inc. rosette, spacer sleeve, screw and wall plug, wall distance in accordance with customer information Mirror finished as part of manufacture ST.2176.TE.S ST.2100.TE.S Price: 45 % surcharge per component / system Two-parts guide profile Two-parts guide profile 18 19
11 FLOOR RAILS FOR TERRA SYSTEMS U-CHANNELS SEAMLESS RAIL CONNECTORS FOR TERRA RAILS ST.2000.TE Floor rails for Terra sliding door systems ST.2025.TE/.K Seamless rail connector for Terra floor rails ST.2025.TE 7 25 If the rail is glued in, seamless rail connector has no screw hole, please indicate, item number ST.2025.TE.K Installation with screws or KK.4070 glue For the sliding door systems: Terra, Terra H, Terra M and Terra M XL For the sliding door systems: Terra, Terra H, Terra M and Terra M XL Floor rails for Terra Akzent sliding door systems Seamless rail connector for Terra Akzent floor rail 4 14 Rail is glued in! Seamless rail connector is glued in! View of the seamless rail connector from below Installation with KK.4070 glue Floor recessed rails Seamless connector for floor recessed rails ST.2025.TE.K 25 ST.2000.TA ST.2025.TA 14 ST.2008.TE ST.2028.TE Rail is glued in! View of the seamless rail connector from below Installation with KK.4070 glue For the sliding door systems: Terra (ST.1060.TE) and Terra Akzent (ST.1064.TA) U-channels made from stainless steel Item Item number KK.4070 Construction glue for Terra floor rails U-channel 15 x 15 x 15 x 1.5 mm delivery length 3 m U-channel 18 x 15 x 18 x 1.5 mm delivery length 3 m U-channel 20 x 20 x 20 x 2 mm delivery length 3 m U-channel 30 x 20 x 30 x 2 mm delivery length 3 m U-channel 40 x 22 x 40 x 2 mm delivery length 3 m Cuts to measurement / mitre ST.4015.UE ST.4018.UE ST.4020.UE ST.4030.UE ST.4040.UE Clamping profile, particularly high stability Content 85 ml, for approx. 2 6 metres floor rail (depending on floor composition) 20 21
12 MANUFACTORY MWE stands for high quality and great attention to detail. Our philosophy and mission is to provide products that keep up with the spirit of the time. We keep meeting the highest requirements in terms of design, quality and functionality. Top MWE technology combined with excellent customer relationship management results in Quality built on passion! Click here to browse through our catalogues and magazines: Doors Ladders Showers Door pulls 22 23
Sliding Door System Terra ST.1060.TE
Sliding Door System Terra ST.1060.TE BASIC SYSTEMS SLIDING SCHIEBETÜRSYSTEM DOOR SYSTEM PROTEC TERRA Sliding Door System TERRA ST.1060.TE 2 3 BASIC SYSTEMS SLIDING DOOR SYSTEM TERRA Sliding Door System
More informationSliding Door System Terra Akzent ST.1064.TA. Premium Edition
Sliding Door System Terra Akzent ST.1064.TA PREMIUM SYSTEMS SLIDING DOOR SYSTEM TERRA AKZENT Sliding Door System TERRA AKZENT ST.1064.TA 2 3 PREMIUM SYSTEMS SLIDING DOOR SYSTEM TERRA AKZENT Sliding Door
More informationSliding Door System Terra M XL ST.1063.TXL. Door leaf weight. up to 400 kg! Premium Edition
Sliding Door System Terra M XL ST.1063.TXL Door leaf weight up to 400 kg! Sliding Door System TERRA M XL ST.1063.TXL - Door leaf weight up to 400 kg! 2 3 Picture shows mirror-finished version Sliding Door
More informationGEZE SLIDING DOOR SYSTEMS
GEZE Perlan 140 Multi-faceted uses with individual accessories The discrete design supports every required room effect and makes the sliding door system with its accessories a guarantee for elegant and
More informationSilent Aluflex 80 Sliding door system: A wealth of options for peoples who want the best
Silent Aluflex 80 Sliding door system: A wealth of options for peoples who want the best Escape the mundane and discover something special: Unusual inspirations and surprising solutions for your space
More informationInterior Equipment/Shop Fittings
Interior Equipment/ Contents Room and Frontwall Systems DIFLEX Adjusting foot for raised floors Hook-in profile Hook-in profile Eilox SHOPTEC Shopfitting system Wall channel Bracket Column Accessories
More informationSINGLE TRACK BYPASS (patent pending) barn door hardware
SINGLE TRACK BYPASS (patent pending) barn door hardware Installation Manual What is included in your kit: Part number Part name Quantity 1 Inner door hanger 2 2 Outer door hanger 2 3 5/16 x 1.5 lag bolts
More informationBAKA Protect Serie 2000 / Protect. BAKA Protect Series 2000 / The adjustable hinge system for timber entrance doors
Protect Serie 2000 / 4000 Protect BAKA Protect Series 2000 / 4000 The adjustable hinge system for timber entrance doors index BAKA Protect 2D BAKA Protect 2010 2D two-dimensionally adjustable up to 120
More informationPrivacy Wall Glass Selections - Polished Edge Slider Door
Privacy Wall Glass Selections - Polished Edge Slider Door 3/6" HEX BIT PUTTY KNIFE #2 ACR BIT SUCTION CUP HOLDERS DOOR LEAF: Satin Tempered Clear Tempered LOCTITE 425 SIDE LIGHT ETCHED GLASS STYLES: Satin
More informationHardware Fitting Accessories Bolts
Lever action flush bolt With slide Width: 19 mm Stroke (a): 25 mm 1 Flush bolt 1 Set of fastening material With lever arm Width: 19 mm Stroke (a): 18 mm 1 Flush bolt 1 Set of fastening material Stainless
More informationTable and Furniture Base Fittings Plinth Adjusting Fittings
Adjusting screw with M8 or M thread Rigid, for glide inserts, steel thread Finish/Colour: Black, thread galvanized Version: With acceptance Ø30 mm Thread M8 650.22.381 M 650.22.382 Packing: 1 or 0 pcs.
More informationSpecialist Furniture Range
Specialist Furniture Range Featuring; Harley Dementia Furniture INDI STRUCT High Dependency Solutions INDI STRUCT Living INDI STRUCT Bedroom High Dependency Beds Harley Dementia Bedroom Range The tops
More informationwww.hafeleindia.com www.hafeleindia.com INTRODUCTION Intuitive furniture is the need of the hour. In times like these where every extra square meter is considered as good as gold, installing versatile
More informationHARDWARE and PRODUCT SPECIFICATIONS ANTIMICROBIAL CASEWORK
HARDWARE and PRODUCT SPECIFICATIONS ANTIMICROBIAL CASEWORK HARDWARE SPECIFICATION KEY 1. DOOR/DRAWER PULLS 2. HINGES 3. DRAWER SLIDES 3A. DRAWER SLIDES 3B. FILE DRAWER SLIDES 4. LOCKS 4A. DRAWER LOCKS
More informationLocks and Catches Catches and Furniture Bolts
Magnetic catch with low noise closure Material: Plastic housing Version: with closed surface and internal magnet, magnets no viewable : Press fixing Pull 0. kg, for drilling hole Ø8 mm white 26.01.701
More informationPortofino Installation Guide
vjul16 (for 17 or 24 mm Surface Wall Profiles) DO NOT ASSEMBLE WITHOUT FULLY READING THESE INSTRUCTIONS Page 2 Thank you for purchasing this Portofino shower enclosure. Please study these instructions
More informationComposition of kit SC3140 SC3110 SC3100 SC3140 SC3120. KF-SC31-R0_EN PAGE 2 of 15. max mm. max. 100 kg. 10 mm
Composition of kit SC3140 SC3100 SC3140 SC3120 max. 100 kg 10 mm max. 2700 mm KF-SC31-R0_EN PAGE 2 of 15 important information KF-SC31-R0_EN PAGE 3 of 15 DIAGRAM OF WALL OPENING AND CROSS-SECTION Lv LG
More informationTechnical product descriptions WORKTOPS STANDARD SLIM LINE. 1. Material thickness 38 mm. 2. Core/substrate material Chipboard
Technical product descriptions WORKTOPS I STANDARD 1. 38 mm 2. Chipboard 3. Surface material Laminate (CPL, HPL) 4. Laminate thickness 0,6-0,8 mm 5. Surface structure Wood pore or relief, matt, gloss 6.
More informationTechnical Product Description
Worktops 5. Thickness material structure Front edge Bottom face coating 40 mm, 50 mm Laminate according to standard: EN 438 Wood pore or relief, matt or gloss 2 x Radius 3 mm, 6 mm or 8 mm depending on
More informationNEWS Part. N /0 MINITEC NEWS
NEWS 2009 Part. N 95.0423/0 MINITEC NEWS 2009 1 TABLE OF CONTENT INTRODUCTION CONTENTS 3 END CAP Z WITH HAMMER TAPS 3 END CAP 45X45 VA 4 ANGLE 25 GD-Z 4 ANGLE 45X90 GD-Z 5 ANGLE 90 GD-Z 5 HINGE 19 S 6
More informationSliding Door Hardware-Glass Bottom Rolling System
Sliding Door Hardware-Glass Silent Aluflex 0 Maximum door weight: 0 kg ( lbs.) Maximum internal height:,500 mm (9 / ) Mullions are recommended for doors taller than 000 mm ( 3/ ) Door width: 500 500 mm
More informationSelection BASIC LINE BASIC LINE PLUS VARIO LINE SERIES TUBE LINE STEEL LINE
PLUS 30 for cable carriers Support trays page 304 PLUS Guide channels page 305 RCC Rail Cable Carrier page 309 ECC Emergency Cable Carrier page 30 Strain relief devices page 3 Assembly profile bars page
More informationHawko LED Flex & Accessories Installation Instructions
LED Flex & Profiles Hawko LED Flex & Accessories Installation Instructions Contents Installation of IP20 LED Flex 4 Installation of IP67 LED Flex 6 Mounting Channel Installation 8 Mounting Clip Installation
More informationSCI-FAB Product Specifications. Casework Section 1. Part 1 General
SCI-FAB Product Specifications Casework Section 1 Part 1 General 1.1 SCOPE OF WORK Includes all factory fabricated stainless steel casework as required by the project drawings. 1.2 TYPICAL INCLUSIONS A.
More informationCHICKEN COOP & CHICKEN RUN. Tools required for assembly (not included)
CHICKEN COOP & CHICKEN RUN ASSEMBLY MANUAL SKU# 6839 Tools required for assembly (not included) Distributed by: TRACTOR SUPPLY COMPANY 0 VIRGINIA WAY, BRENTWOOD, TN 3707 For customer support, call: -888-376-960
More informationDeauville Installation Guide
vjul16 (for 17 or 24 mm Surface Wall Profiles) DO NOT ASSEMBLE WITHOUT FULLY READING THESE INSTRUCTIONS Page 2 Thank you for purchasing this Deauville shower enclosure. Please study these instructions
More informationFig. 2 DORMA-Glas Stand/Issue 02/03 Seite/Page 1/7
FSW Installation instructions Track rail 75 x 72 mm 1. Ceiling substructure and installation of the track rail (Fig. 1): The track rail must be bolted over its entire length (including the stacking track
More informationInstallation Instructions
Supafold Slide Aside System Three Fold Room Divider Installation Instructions Distinctive Doors Ltd Supafold Slide Aside Internal Folding System IMPORTANT: Before proceeding with the installation, and
More informationFolding Concepta 25. Flush when closed, completely open. Hardware for bi-folding cabinet pocket doors up to 25 kg (55 lbs.) per door.
Flush when closed, completely open. Hardware for bi-folding cabinet pocket doors up to 25 kg (55 lbs.) per door. Description Flush cabinet fronts open fully end to end with HAWA-Folding Concepta 25. Two
More informationPocket Door Kit PD1 / PD2 Installation Instructions. Kit Contents.
Pocket Door Kit PD1 / PD2 Installation Instructions Kit Contents. 1, Create Rough Opening In Stud Wall Construct rough opening ensuring all sides are square and level. Rough opening should be; Height =
More informationSliding Door Systems : 08
Sliding Door Systems : 08 : 02 Our Philosophy Exclusive design, but at the same time maximum functionality of our products are key to what we do, to ensure that we create a lasting impression with you
More informationMuto Premium Recessed Mount. XL150/80/120 Fixed Panel ONLY - Ceiling mount. Installation instructions
Muto Premium Recessed Mount XL150/80/120 Fixed Panel ONLY - Ceiling mount Installation instructions 936036 05-2018 EN Table of Contents Table of contents 1 Technical specifications 3 1.1 Overview 3 1.1.1
More informationSection 3: Understanding Your Shop Drawings Reading Shop Drawing Abbreviations 60" O.A. stands for the overall dimension from the back wall to the front face of achieve your 60" overall you will set the
More informationACCESSORIES. Wooden Dowels. Fasteners. Miscellaneous. Shelf Supports
ACCESSORIES ACCESSORIES Fasteners PMI has a variety of Fasteners and Connectors for any application. Euro-Bolts, Spiral Cam Connectors, Screws and Sleeves - we have your solution! Shelf Supports Assorted
More informationMIRAGE-X / BELLA. Shower Door Installation Instructions
MIRAGE-X / BELLA Shower Door Installation Instructions IMPORTANT DreamLine reserves the right to alter, modify or redesign products at any time without prior notice. For the latest up-to-date technical
More informationTECTUS. The completely concealed hinge system
TECTUS The completely concealed hinge system It s still design even if there s nothing to be seen! TECTUS This Latin word for concealed signifies SIMONSWERK s newly developed, completely hidden hinge system.
More informationStandoffs FISSO. Display with Elegance
Standoffs FISSO Display with Elegance Table of Contents Fisso Ghost... 1 Fisso Klipser... 2 Fisso Cubix... 3 Fisso Steel... 4 Fisso Punto... 5 Fisso Micro Alu... 6 Fisso Mix Alu 13mm... 7 Fisso Mix Alu
More informationJ; ('& ): J; )'& ): J; +'& ): J; +(+ ): J;,)& ): 9WXb[ i[j J;9JKI <_n_d] <P%' '& <_n_d] IP 7ii[cXbo 7Z`kijc[dj 9WbYkbWj_ed \ehckbwi
INdex ZERTIFIZIERT 4 INTERIOR DOOR SIMONSWERK TECTUS TE 210 3D for unrebated and rebated, flush-faced quality doors Hinge up to 40 kg Technical Data Load capacity Length (leaf/frame) Width (leaf/frame)
More informationSLIDING DOOR SYSTEM_ S42 PRODUCT LIST. System description Accessories
SLIDING DOOR SYSTEM_ S42 PRODUCT LIST System description Accessories 1 SLIDING DOOR SYSTEM_ S42 1.0_ System description_ page 03 2.0_ Profiles_ page 04 3.0_ System description S1600 fixed panels_ page
More informationPLANE Line PL 901 BASIC
Single Wing T 90 (El2 90-SaC5) Fire Resistant Steel Door PLANE Line PL 901 Plane Optic Fire Protection T90 (El2 90-SaC5) in accordance with DIN EN 1634-1 * Smoke Control RS (S 200) in accordance with DIN
More informationThe Festival Assembly Instructions
The Festival Assembly Instructions Toll Free: 866.768.8465 Hours: 9-5 Monday-Friday EST www.homeplacestructures.com Package ships as shown CONTACT INFORMATION: HomePlace Structures 301 Commerce Drive New
More informationTop Mount Ultra Modern Hanger
Top Mount Ultra Modern Hanger ASSEMBLY INSTRUCTIONS TOP MOUNT ULTRA MODERN HANGER Recommended Tools Level Tape Measure Pencil Drill with 1/8, and 1/4, Drill Bits and Phillips Bit Socket Wrench with 9/16
More informationTECTUS. The completely concealed hinge system
The completely concealed hinge system index te 210 3d up to 40 kg 4 te 310 3d up to 60 kg 5 te 510 3d up to 100 kg 6 TE 525 3D up to 100 kg 7 te 630 3d up to 200 kg 8 Cable set TECTUS Accessories 9 Fixing
More informationSLIDING DOOR SYSTEM_ S34 PRODUCT LIST. System description Accessories
SLIDING DOOR SYSTEM_ S34 PRODUCT LIST System description Accessories SLIDING DOOR SYSTEM_ S34 1.0_ System description_ page 03 2.0_ Profiles_ page 04 3.0_ Profile finishes_ page 08 4.0_ Panels_ page 09
More informationPortofino Case2 Installation Guide
Portofino Case2 Installation Guide vjun16 (for 17 or 24 mm Surface Wall Profile) DO NOT ASSEMBLE WITHOUT FULLY READING THESE INSTRUCTIONS Page 2 Thank you for purchasing this Portofino Case 2 shower enclosure.
More informationInterior Equipment, Shop Fittings
Interior Equipment, Häfele, the brand you can trust. The innovator of functionality. Contents Room and Frontwall Systems DIFLEX Adjusting foot for raised floors Hook-in profile Eilox SHOPTEC Shopfitting
More informationINSTALLATION INSTRUCTIONS PRAVOL DURA-SHIELD COMPOSITE DECK RAILINGS
INSTALLATION INSTRUCTIONS PRAVOL DURA-SHIELD COMPOSITE DECK RAILINGS Important: Read all sections before you start Prior to installing railing, please consult local zoning laws in regards to load requirements
More informationProduct overview. Fasteners. new article extended article. Fasteners. Fasteners adjustable. with spring clip K0043. heavy-duty version K0052.
49 430 Product overview with spring clip K0043 heavy-duty version K005 with a pulling latch K0044 Page 43 Page 441 with a pulling latch K0045 Page 433 screw-on holes visible K0046 Page 434 screw-on holes
More informationIMPORTANT: Read all sections before you start
1 IMPORTANT: Read all sections before you start For the most up to date information please visit our website @ www.newtechwood.com Prior to installing the railing, please consult local zoning laws in regards
More informationDeauville Installation Guide
vjul16 (for Recessed Wall Profiles) DO NOT ASSEMBLE WITHOUT FULLY READING THESE INSTRUCTIONS Page 2 Thank you for purchasing this Deauville shower enclosure. Please study these instructions carefully before
More informationDirect Importers of the Finest Exotic Hardwood Decking, Lumber, & Flooring
Direct Importers of the Finest Exotic Hardwood Decking, Lumber, & Flooring These Instructions can be found online at: http://www.advantagelumber.com/how-to/buildwoodstoragebox.html Material List 72 FEET
More informationStaples to bottom of cabinets for protection in shop Size: 1-1/2'' L x 5/8'' x 9/16'' Natural finish Plastic Item # Size Finish Material Case Qty.
Edge Protector Staples to bottom of cabinets for protection in shop Size: 1-1/2'' L x 5/8'' x 9/16'' Natural finish Plastic Size Finish Material Case PX91000N* 1-[½]"L x [⅝]" x [ 9 / 16]" Natural Plastic
More informationMerlin / Prima. Patch Fittings. Patch Fittings. Merlin & Prima Series
/ Prima Patch Fittings & Prima Series / Prima In the field of architectural fittings for glass doors, provides high quality and total design flexibility for ease of installation, safety, security and functionality.
More informationSTATE WHEN ORDERING HI =...
STATE WHEN ORDERING HI =... mm Surface treatment of outer walls and night closing doors Stainless steel cladding Special anodized... RAL... Special powder coating...... Surface treatment of door leaves
More informationSLIDING DOOR SYSTEM_ S42 PRODUCT LIST. System description Accessories
SLIDING DOOR SYSTEM_ S42 PRODUCT LIST System description Accessories 1 SLIDING DOOR SYSTEM_ S42 1.0_ System description_ page 03 2.0_ Profiles_ page 04 3.0_ System description S1600 fixed panels_ page
More informationArt and Picture Hanging Rail Systems SYSTEMS. Display with Elegance
Art and Picture Hanging Rail Systems SYSTEMS Display with Elegance Table of Contents Classic Rail +..... 1 Click Rail...... 4 Top Rail...... 8 Info Rail...... 10 Deco Rail...... 12 Wires and Hooks...................
More informationXL-GC03 Sliding Door Lock Installation Manual PAT XL-GC06 Sliding Door Hanger Installation Manual XL-GC08 Sliding Door Lock Guide Installation Manual
XL-GC0 Sliding Door Lock Installation Manual PAT XL-GC0 Sliding Door Hanger Installation Manual XL-GC0 Sliding Door Lock Guide Installation Manual Read all instructions carefully before installation. Before
More informationbriousa.com where ideas unfold Brio Single Run Top hung straight sliding architectural systems for panels up to 350kg (770lbs)
where ideas unfold briousa.com Brio Single Run Top hung straight sliding architectural systems for panels up to 350kg (770lbs) Brio where ideas unfold Watch your adventurous architectural ideas unfold
More informationInstallation Instruction
Installation Step 1 Cut Upper Guide and Lower Tracks to opening size Step 2 Mount Upper Track to soffit or ceiling. Use appropriate mounting hardware for your field conditions. NOTE: The Lower Track is
More informationPORCH COMPANY PVC PANEL AND DECKORATOR RAILING
PORCH COMPANY PVC PANEL AND DECKORATOR RAILING Installation Instructions +1-615-730-8067 porchstore@porchco.com www.porch-store.com Assumption: Your deck is built, your decking is down and your 4x4 core
More informationRAILINGSYSTEMS PLANNING MANUAL EFFICIENCY DECIDES
RAILINGSYSTEMS PLANNING MANUAL EFFICIENCY DECIDES THE SYSTEM The system that can even be without any load-bearing handrail... * With general technical approval (AbP) and certified type structural properties!
More informationFOLDING DOOR SYSTEMS: ASSEMBLY AND INSTALLATION/INSTRUCTION FOLDING DOOR SYSTEM S300 BI-FOLD (S34) V2018.1
FOLDING DOOR SSTEMS: ASSEMBL AND INSTALLATION/INSTRUCTION FOLDING DOOR SSTEM S00 BI-FOLD (S4) V2018.1 1 GENERAL INFORMATION / TOOLS General information and tools_ page 0 Contents_ page 04 Detail drawings_
More informationInstallation instructions Sliding door fittings Antra I for glass doors
Set sliding door fittings Antra I Installation instructions for glass doors 3/8" * * SW 5 Set Antra I USU46-800DB USU46-00DB USU46-300DB USU46-540DB Beyerle US..., ABP-Beyerle, it s subsidiaries and agents
More informationContour Hanger ASSEMBLY INSTRUCTIONS
Contour Hanger ASSEMBLY INSTRUCTIONS CONTOUR HANGER Recommended Tools Drill with 1/8, 1/4, and 3/8 Drill Bits, 1-1/8 Forstner Bit or 1-1/8 Spade Bit, and Phillips Bit 9/16 and 5/8 Combination Wrench Socket
More informationLift-off hinge. Rising hinge. Standard hinge. Heavy duty hinge. Parliament hinge. Spring hinge. Double action spring hinge. Concealed mortise hinge
Door Hinges Contents Butt hinges Lift-off hinge Rising hinge Standard hinge Heavy duty hinge Parliament hinge Spring hinge Double action spring hinge Concealed hinges Concealed mortise hinge Pivot door
More informationBARN DOOR HARDWARE KIT
INSTALLATION GUIDE Main Components x1 Rail x5 Wall Spacer x2 Anti-jump Block x2 Bent Strap x1 Right Stopper x1 Left Stopper x5 5/16 (8mm x 60mm) Carriage Bolt x5 5/16 (8mm x25mm) Anchor x5 5/16 (8mm x
More informationMaterial Packing Brown Grey Pine Black White
RTA Connectors Minifix Zinc alloy For housing: 12 or 18 Bolt hole: Ø 7 or 8, depending on choice of connecting bolt Drilling distance B: Distance from centre of Minifix housing to shelf front edge (24
More informationMANET. Technical manual for ordering and installation. Single-point fixings for interior applications
MNET Technical manual for ordering and installation Single-point fixings for interior applications DORM MNET Glass design system MNET ONEPT MNET OMPT Sets Today s approach to office design tends to be
More informationINSTALLATION GUIDE. 1. Overview. 2. Measuring. 3. Tools & fixings you will need B C. Opening Width. Opening Height
INSTALLATION GUIDE Please take a few minutes to read through this guide before getting started. 1. Overview A Typical Sliding Wardrobe Door Layout A Frame - Top Liner (optional) B Top Track C Frame - Strike
More informationSLIDING GATES BRUNDLE
SLIDING GATES BRUNDLE 32 BRUNDLE TOOTHED GATE RACK & ACCESSORIES TO BE WELDED TO GATE. GALVANISED OR SELF COLOUR IN ROLLED STEEL FOR GATES UP TO 1800KG Rack 22 x 22 H Art L H T L T Self Colour Self Colour
More informationSide and rear window, assembly overview
64-7 Side and rear window, assembly overview 1 - Side/rear window Removing Unbroken Page 64-9 Broken Page 64-11 Installing Page 64-13 Curing time Page 64-21 Re-sealing Page 64-25 2 - PUR adhesive sealant
More informationTWIG Hanger ASSEMBLY INSTRUCTIONS
TWIG Hanger ASSEMBLY INSTRUCTIONS TWIG HANGER Recommended Tools Drill with 1/8, 1/4, and 3/8 Drill Bits, 1-1/8 Forstner Bit or 1-1/8 Spade Bit, and Phillips Bit 9/16 and 5/8 Combination Wrench Socket Wrench
More informationInstallation Instruction
Installation Step 1 Cut Upper Guide and Lower Tracks to opening size Step 2 Mount Upper Track to soffit or ceiling. Use appropriate mounting hardware for your field conditions. NOTE: The Lower Track is
More informationBarn Door & Hardware Installation Guide
Barn Door & Hardware Guide INTRODUCTION Thank you for purchasing our hardware. Our barn door and hardware will add a stunning accent to your living environment and maximize its space. This manual covers
More informationCoburn Interior Sliding Systems. Coburn COBURN SLIDING SYSTEMS
Coburn Interior Sliding Systems Coburn COBURN SLIDING SYSTEMS Interior Sliding Door Gears FOR CUPBOARDS, WARDROBES, INTERIOR SLIDING AND FOLDING DOORS A comprehensive range of top hung and bottom rolling
More informationSLIDING SYSTEMS. Product catalog 2017
SLIDING SYSTEMS Product catalog 2017 Grafipro Oy Product catalog 2017 Table of contents: 3 Areas of use 4 C rails C-30 is a company specialising in aluminium and plastic composite materials. Our expertise
More informationTransition Range Installation, Care & Adjustment Instructions
Introduction The following instructions will enable you to complete the final assembly and adjustment of your new furniture. Hardware Box Each of the cabinets contains a Hardware box that contains all
More informationMUTO COMFORT DORMOTION XL 150/80 L 80
MUTO COMFORT DORMOTION XL 150/80 L 80 Installation instructions - Wall mount with DORMOTION ( ) TABLE OF CONTENTS Closer overall Overview Intended use Wall requirements and fittings Safety instructions
More informationSpoked GARRICK HANGER
Spoked GARRICK HANGER ASSEMBLY INSTRUCTIONS SPOKED GARRICK HANGER Recommended Tools Drill with 1/8 and 1/4 Drill Bits, 1-1/8 Forstner Bit or 1-1/8 Spade Bit, and Phillips Bit 9/16 and 5/8 Combination Wrench
More informationTE 526 3D Manufactured of solid stainless steel for flush commercial doors
1 TE 526 3D Manufactured of solid stainless steel for flush commercial doors Technical Details load capacity 264 lbs overall length 6.102 " width (door) 1.024 " width (frame) 1.024 " router bit Ø 3/4 "
More informationPivot-Door Downdraft Cabinet Plans
Pivot-Door Downdraft Cabinet Plans Finished Cabinet Closed Open Exploded View Introduction This simple downdraft-style dust collection cabinet is a great way to keep your shop cleaner and keep your router
More informationACME 50 Application Guide
ACME 50 Application Guide p1 CONTENTS Features & Benefits... 2 Product Images... 3-8 TRIM AND CONNECTORS Trim & Connector Diagram.... 9 Partition Profile Section... 10 Adjustability.... 11 Ceiling & Floor
More informationConnector Technology, Shelf Supports Connection Fittings
MODULAR Connection fitting for recess mounting Finish: Burnished : For recess mounting The plate should allways be installed so that the supporting plate butts against the end of the recess. For rapid
More informationMOVENTO. The Evolution of Motion
The Evolution of Motion is the latest advancement in concealed runner technology. It brings together all of the features, innovations and benefits that Blum has developed since first manufacturing drawer
More informationHow to Install Custom Real Wood and Faux Wood Blinds
Before you begin your installation: READ ALL INSTALLATION INSTRUCTIONS! Make sure that you have all tools and hardware needed for installation. Check the installation surface (wall, ceiling, or window
More informationEcoGlide Sliding Door System
SOLUTIONS FOR TRADE EcoGlide Sliding Door System November 2017 SOLUTIONS FOR TRADE CONTENTS Page 4 Page 5 Page 6-20 2100 Series Floor Guided Sliding Door System 3100 Series Wall Guided Sliding Door System
More informationATTRACTION drawer. Twin-walled seel drawer. Complete. 50 Kilos resistance. indamatic. Range of concealed runners up to. self closing and soft closing.
F U R N I T U R E F I T T I N G S M A N U F A C T U R E R Twin-walled seel drawer. Complete Range of concealed runners up to 50 Kilos resistance. indamatic self closing and soft closing. Double wall 405
More informationINSTALLATION INSTRUCTIONS SIDE BAR FORD ESCAPE & MAZDA TRIBUTE PART #
INSTALLATION INSTRUCTIONS SIDE BAR 2008-2010 FORD ESCAPE & MAZDA TRIBUTE PART # 50136 50137 PARTS LIST: 1 Driver/Left Sidebar 2 10-1.50mm x 35mm Bolt Plate 1 Passenger/Right Sidebar 2 10-1.50mm x 30mm
More informationBEYOND. Accessories 132. General information 102. Safety-related information 157. Short pivoting rod 104. Continuous pivoting rod 106
BEYOND General information 102 Short pivoting rod 104 Accessories 12 Safety-related information 157 Continuous pivoting rod 106 Glass preparation 108 100 DORMA DORMA 101 BEYOND GENERAL INFORMATION SYSTEMATIC
More informationSign Holder I Mirror Clamp Distance Holder I Shelf Support
Sign Holder I irror Clamp : Distance Holder I Shelf Support : 02 Content Glass holder with flat head, mirror clamp round or angular, distance holder till diameter 55 mm, shelf supports. irror clamp S50
More informationAUTO STABILIZING AND LEVELLING SYSTEM
Installation Manual Make sure the caravan is parked in a safe place. Make sure the caravan brake is on. Remove all 4 corner steady legs from the caravan. Remove the corner steady legs by removing the 3
More informationINSTALLATION INSTRUCTIONS
STRIP DOORS AIR DOORS INSTALLATION INSTRUCTIONS BULK PVC FILM STRIP SHEET PANEL SCREENS, CURTAINS and ENCLOSURES MEGA-PRO SWINGING DOORS DOCK ACCESSORIES IMPORTANT Carefully examine the carton(s) for damage.
More informationWSS-Sliding Door Systems - SPRINT. Flexible and exclusive. Varied solutions for single and double leaf all-glass doors.
- SPRINT Flexible and exclusive. Varied solutions for single and double leaf all-glass doors. Limited partnership, based in DE-42579 Heiligenhaus, Local court Wuppertal, HRA 20804 Personal liable partner:
More informationOrganisational Kitchen Fittings Kitchen Cabinet Accessories
Kitchen waste bin systems Single waste bin, capacity 1 litres Carcase width: Min. 400 mm For door mounting: For left and right hand use Installation: Screw fixing to side panel Housing: Steel, plastic
More informationRouter Table. Construction
Router Table A router table is an invaluable tool. The problem, however, is that ready-built router tables are usually relatively expensive and too narrow for many projects. This router table provides
More informationICU TRACKLESS SLIDING DOOR
Interior View 0 Installation Instructions Tools Required: Screwdrivers Small Straight (Flat Blade) - for Terminal Block wiring # Phillips (Crosspoint) - for various #8, #0, and #4 screws Wrenches / Sockets
More informationCable Railing Kit Application Guide
Cable Railing Kit Application Guide January 2019 Nationwide Industries 10333 Windhorst Rd. Tampa, FL 33619 813.988.2628 Fax: 813.988.3465 Photo courtesy of FabWorx Framework You Will Need for Cable Railing
More informationStag Hanger ASSEMBLY INSTRUCTIONS
Stag Hanger ASSEMBLY INSTRUCTIONS STAG HANGER Recommended Tools Drill with 1/8, 1/4, and 3/8 Drill Bits, 1-1/8 Forstner Bit or 1-1/8 Spade Bit, and Phillips Bit 9/16 and 5/8 Combination Wrench Socket Wrench
More informationClick Here to Go Back
Click Here to Go Back Fig. -94 Fig. -97 CC42D 10. Remove the cap screw securing the gear shift stopper plate pin retainer; then remove the retainer. Fig. -95 CC45D 12. Remove the link arm and account for
More informationDublin Stalls Installation Instructions
Dublin Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 9/13/17 Part Identification Round Track Bracket (4) (Not Painted) Round
More information