Edition 01/2013. General Catalog
|
|
- Chad Atkinson
- 5 years ago
- Views:
Transcription
1 Edition 01/2013 General Catalog
2 2Directory
3 3 Directory page 4-23 page page page page ZeroPoint Clamping System Clamping Rail System SL 120 Clamping Rail System SL 080 Dividing Head Automation Directory
4 4Zeropoint Clamping System ZeroPoint Reducing set-up times - Increase The universal
5 5 Clamping System ZeroPoint Clamping System in productivity construction-kit for production
6 6Zeropoint Clamping System Zeropoint Clamping System Field of application ZeroClamp is applicable in all divisions of production Base Units for turning operation are balanced Special clamping cones free of play for low-vibration run
7 Zeropoint Clamping System Field of application Milling, Turning, Eroding, Measuring, Grinding or Presetting 7 ZeroPoint Clamping System Eroding process: no functional problems caused of fluid medium Measuring prodcess: always the defined ZeroPoint
8 8Zeropoint Clamping System ZeroPoint Clamping System Clamping Pot Only 6 bar compressed air required to unfasten the clamping studs locking via spring accumulator 25 kn retention force (clamping pot 120), not self-locking Low-maintenance, sealed system without hydraulic oil: no leckage and intensive to swarf Process reliability due to easiest use. Centical clamping free of play in a hardened steel cone Radial spring embadded in NBR Clamping pot body All components made of stainless steel or corrosion resistant steel Wear-free technology a air hose and clamping plates provides for the required clamping force Locking unit Air connection for releasing Clamping pot cover
9 ZeroPoint Clamping System The functional principle Funktional principle clamping pot ZeroPoint Clamping System Pallet is simply placed on the open ZeroClamp clamping pot. There is no risk of jamming. The spring elements keep the locking unit (clamping wedges) open due to the air pressure (6 bar) in the air hose ZeroClamp positions the workpiece to the planar support faces with a retention force of 25 kn (with 2,5 µm repeat accuracy) by bleeding the air hose functional video look at
10 10 Zeropoint Clamping System ZeroPoint Clamping System 2,5 µm repeat accuracy The absolut zeropoint: Compensation of thermal extensions always to central axis bore-hole gauge errors of up to ± 0.1mm can be compensated Special clamping cones free of play for low-vibration run No use fo sword studs or loos studs Absolut zeropoint due to thermal compensations towards zeropoint and rotational axis Precision cone on insertion, the resilently sprung taper of the socket is slightly widened to the flat faces HSK Principle Traditional systems use either a cylindrical seat or a rigid cone for centering. A cylindrical seat always requires some amount of play (i.e. 25 H5 holder / 25 h5 bolt). Play in such a combination may be as large as 18µm. In a conical fit the cone must be shaped with great care. Otherwise the stage will protrude immediately (if the bolts are too large), or else the play will be the same as in a cylindrical system. The function of the ZeroClamp zero point clamping system resembles that of a hollow cone shank. In the latter system, the thin-walled cone is deformed as it is drawn in until its plane fits the contours of the seat. In principle, a zero point clamping system works in a similar way: While the cone is being drawn in, the seat ring will be widened minimally. Within the stage or the workpiece in contact with the plane seat, there can be no play.
11 ZeroPoint Clamping System Unique Features 11 Unique Features ZeroClamp Patent-registered Design, simple layout. Extremely few and simple components allow a very high reliability. Even chips will not harm the functional principle. Competitior Systems Complex mechanics using ball cages, pistons, valves, etc. When contaminated with chips risk of blockage and/or malfunction. ZeroPoint Clamping System Highest precision due to the hollow shank taper principle (HSK). When retracting the clamping bolt, the elastic part of the taper ring of the chuck will be slightly expanded thus providing a perfect and highly accurate fit and a repeatability < 3 µm. Normally a joining fit is required (e.g. 32 mm h5/h5 for bolts and mountings). In this particular case the minimum backlash is 0 µm whereas the maximum is 22 µm. How can standard repeatabilities of < 5µm be achieved? Thermo Stability Thermal impacts and/or micrometrical deviations are compensated by the hollow shank taper (HSK) principle. The taper rings always compensate the errors to the center of the clamping position. (E.g. on a rotary table the center of a pallet always remain in the machine center line). Only one type of clamping bolt required. Logistically simple manageability as one only type of bolt shall be screwed into the pin bore. Fixed system with 3 different types of bolts. Thermal impacts and/or micrometrical deviations shall cause asymmetrical offsets originating from the zero bolt. (On a rotary table, the center of a pallet shall be pushed away from the machine center line). Generally three different types of bolts (zero bolt, floating or sword bolt, free bolt). Logistically complicated. It needs to be documented for each fixture, which bolt will have to be mounted at which place and in which angular position. High risk of errors! No self-locking. In case of a crash, the fixture or the clamping device can give way thus possibly saving the machine spindle. In the case of a damage to the energy supply, forcing screws will allow the removal of the fixture. No tilitng Layout and design will prevent any tilting of the clamping bolts. Easy joining and removal even in inclined positions or large offset of the center of gravity. Pneumatic System with low installation height Clamping via spring assembly, unclamping by means of compressed air. Patented design for very high holding strengths even with standard air-pressures. In case of a crash self-locking systems will cause the worst damages possible. In the case of a damage to the energy supply, in most cases the fixture will have to be destroyed in order to be able to remove the pallet. Partially joining and removal must be effected in precisely defined and parallel positions as, mostly, cylindrical or tapered clamping bolts having a minimal tapering are used. Particularly the removal of highly asymmetric, heavy components will be problematic. Hydraulic systems with disadvantages determined by the system: pump, duct, collision, leakage, bleeding, etc. Partially higher installation heights compared to pneumatic systems. for further information go to
12 12 Zeropoint Clamping System Base Units Standard Base Units Standard dimensions (clamping pot Ø 120) Order-No.: Order-No.: designation dimensions in mm pitch S pots Base Unit Cover plate Base Unit Standard 2-times 416 x Base Unit Standard 4-times 366 x Base Unit Standard 6-times 366 x Base Unit Standard 8-times 366 x Base Units Standard clamping pot 120 (Pitch S 200 mm in X and Y, height 44 mm.) The base units are equipped with counterbores for hexagon socket M12 or M16. All bores for T-slot pitches of 63, 100, 125 mm. Additional centre bore 25 H7 in every base unit to include a centering set, as well as two externally arranged bores 25 H7 for allignment sets for positioning in the guide groove. Notes: Accessories such as clamping studs, alignment sets nd connection pieces are not included in the delivery. Please order additionally. Cover Plates for Base Units The cover plates are made of 1 mm stainless steel l to cover the base units. (Surface protection + bore cover.) When ordering together with a base unit, the cover plates will be mounted.
13 Base Units (Standard) Machine Types specific Base Units machine type specific (clamping pot Ø 120) 13 ZeroPoint Clamping System Order-No.: Order-No.: designation dimensions in mm pitch S pots Base Unit Cover Plate Base Unit DMU 50 evo Ø 500 x Base Unit DMU 50 Ø 630 x Base Unit DMU 70 evo Ø 700 x Base Unit DMC 635 V 560 x Base Unit DMC 1035 V 1000 x Base Unit DMU 80 P Ø 900 x Base Unit Hermle C 600 U Ø Base Unit Hermle C 40 U Ø Base Unit Mazak Variaxis 500 Ø 500 x Base Unit Mazak Variaxis 630 Ø 630 x Base Units machine type specific clamping pot 120 The base units are equipped with counterbores for hexagon socket M12 or M16. All bores for T-slot pitches of 63, 100, 125 mm. Additional centre bore 25 H7 in every base unit to include a centering set, as well as two externally arranged bores 25 H7 for allignment sets for positioning in the guide groove. Notes: Accessories such as clamping studs, alignment sets nd connection pieces are not included in the delivery. Please order additionally. Cover Plates for Base Units The cover plates are made of 1 mm stainless steel l to cover the base units. (Surface protection + bore cover.) When ordering together with a base unit, the cover plates will be mounted.
14 14 Tombstones for horizontal BAZ pallet size 500 x 500 Zeropoint Clamping System Order-No.: Base Unit 6-times for adapting the tombstones dimensions A B C pitch S pitch S in mm (4x) 200 (2x) The base units are equipped with counterbores for hexagon socket M16. All bores for T-slot pitches of 100 mm. Damit wird sie am Maschinentisch verschraubt. Additional centre bore 25 H7 in the base unit to include a centering set, as well as two externally arranged bores 25 H7 for allignment sets for positioning in the guide groove. Tombstone 12-times A B H pitch S dimensions in mm Clamping pots individually switchable per side with indexing equipement. base plate 500 x 500 x 50 mm Tombstone will be positioned on base unit order-no.: Order-No.: Tombstone 12-times A B H pitch S dimensions in mm Clamping pots individually switchable per side with indexing equipement. base plate 500 x 500 x 50 mm Tombstone will be positioned on base unit order-no.: Order-No.: Cover Palte for Base Unit 6-times Order-No.: dimensions in mm A B Fixing screws are included in the delivery! When ordering together with the base unit, the cover plate will be mounted.
15 Consoles Standard programm Note: clamping bolts und clutch nipple G 1/4 included in delivery! (Order-No / / with clutch nipple G 1/8 ) Console 1-times with round blank (steel) on bottom side dimensions in mm A B H pitch S pots Order-No.: bolts/pcs / / / / / / / ZeroPoint Clamping System Console 2-times with round blank (steel) on bottom side dimensions in mm A B H pitch S pitch S pots Order-No.: pots bolts/pcs / / / / / / / / / / 4 2 Console 2-times with round blank (steel) on bottom side dimensions in mm A B H pitch S pitch S pots Order-No.: pots bolts/pcs / / / / / / 4 2
16 16 Zeropoint Clamping System Consoles Standard programm Console 3-times with round blank (steel) on bottom side dimensions in mm A B H pitch S pitch S pots Order-No.: pots bolts/pcs / / / 3 3 Angular Consloe 2-times with round blank (steel) on bottom side dimensions in mm A / C B H pitch S pitch S pots Order-No.: pots bolts/pcs / 2 2 Component-System
17 Accessories 17 Operation, positioning, attachment ZeroPoint Clamping System Standard-Connection-bloc (for Base Units) Specification: With 2 connection threads G 1/4 to connect loosening and exhaust pipe Order-No.: Comfort-Connection-bloc (for Base Units) Specification: With 1 connection thread G 1/4 to connect compressed air The connection block has a manual valve for releasing, locking and blowing out. Order-No.: Order-No.: Comfort-Connection-block 5A (Typ S) (for Base Units) zur frontseitigen Befestigung Specification: With 1 connection thread G 1/8 to connect compressed air The connection block has a manual valve for releasing, locking and blowing out.
18 18 Accessories Zeropoint Clamping System Quick-release-coupling 1/4 To ensure a trouble-free function of the system, please use only our couplings. Order-No.: Quick-release-coupling 1/8 To ensure a trouble-free function of the system, please use only our couplings. Order-No.: Alignment-Set Size 10/40 12/40 14/40 14/50 16/40 18/40 22/40 Order-No.: Size = Slot width B / clamping thickness S For parallel alignment in the T-slots. Centering-Set size 30/10 32/10 50/10 50/20 Order-No.: Größe = Centering- A / Centering height B For centrical alignment in the centre bore. For base units with mm thickness. Foot pedal switch Specification: Pneumatic foot switch, recommended for horizontal clamping systems Order-No.: 10306
19 Accessories 19 Order-No.: Pallet Cube dimensions lenght width height Specification: high-tensile aluminium (AlMg4.5Mn) anodised incl. 2 centering pins - with 1 bore for clamping stud on bottom side. ZeroPoint Clamping System SK 40 Adaption suitable for pot size height H bores for clamping bolts Order-No.: on request Suitable for: Application: clamping pots 090 / 120 / 138 mm with indexation Can be used horizontally and vertically. Clamping of workpieces via an SK40 (DIN 69871) tool arbor (such as ER, OZ etc. ). Clamping studs are bolted through the adapter from below to secure the arbor. Especially suitable for small, delicate or round workpieces.
20 20 Zeropoint Clamping System Clamping pots Clamping bolts Clamping pot 90 Version no Indexing bore with Indexing bore Retention force 12,5 kn 12,5 kn Order-No.: Clamping bolts with internal thread, incl. appropriate threaded pin (for clamping pot 090) Size 12M10 14M12 Fitting 12k6 14k6 Thread M10 M12 Order-No: Clamping pot 120 Version no Indexing bore with Indexing bore retention force 25,0 kn 25,0 kn Order-No.: Clamping bolts with internal thread, incl. appropriate threaded pin (for clamping pot 120) Size 12M10 16M8 16M10 18M12 18M16 Fitting 12k6 16k6 16k6 18k6 18k6 Thread M10 M8 M10 M12 M16 Order-No: Clamping pot 138 Version no Indexing bore with Indexing bore Retention force 40,0 kn 40,0 kn Order-No.: Clamping bolts with internal thread, incl. appropriate threaded pin (for clamping pot 138) Size 12M10 18M12 18M16 25M16 Fitting 12k6 18k6 18k6 25k6 Thread M10 M12 M16 M16 Order-No:
21 Clamping pots Clamping bolts Clamping pot 190 Version no Indexing bore with Indexing bore Retention force 60,0 kn 60,0 kn Order-No.: ZeroPoint Clamping System Clamping bolts with internal thread, incl. appropriate threaded pin (for clamping pot 190) Size 12M10 18M16 30M24 Fitting 12k6 18k6 30k6 thread M10 M16 M24 Order-No: Closure bolt Size Order-Nr.: With O-ring, to protect unused clamping points against dirt and swarf.
22 22 Application Examples Zeropoint Clamping System Console on Base Unit 4-side machining on horizontal machining centre Base Unit with Tombstone 48-times Machining a monocast part on Horizontal machining centre Base Unit on a Measuring maschine Base Unit with 2 Consoles Machining on vertical machining centre Clamping device on Tombstone Machining on horizontal machining centre Reducing the set-up time ca. 80% Base Unit with Consoles Machining plates on vertical machining centre
23 Application Examples 23 ZeroPoint Clamping System Base Unit with Consoles Heavy machine cutting Horizontal BAZ Base Unit with Clamping Rails 1. setting on Horizontal machining centre Base Unit on a Measuring maschine Tombstone with clamping ralils Clamping on Horizontal machining centre SK 40 Adaption on tombstone machining on horizontal machining centre Consoles on Base Unit with clamping rails 1. setting on Horizontal machining centre
24 24 Clamping Rail System SL 120 The modular Clamping Rail System SL 120 Clamping with highest flexibility!!!
25 25 Clamping Rail System SL 120
26 26 Clamping Rail System SL 120 The modular Clamping Rail System SL 120 Compact, modular structural form Clamping forces up to 40 kn Conventional and Gripclamping possilble Pairing accuracy 0,03 mm Due to exact serration rails continuously coupleable High precision, ground and hardened functional surfaces fastening bores M16 for ZeroClamp Zeropoint-System Pitch S 200 mm and grid angles / pallets (R100 mm) Easy clamping using a torque wrench. Simple adjustement quick changing jaws ruler for quick positioning jaws on upper surface
27 The modular Clamping Rail System SL 120 Starter-Set SL 120 Order-No.: Clamping Rail System SL for 1. setting (raw material) form-closed clamping with grip inserts and for 2. setting (machined workpieces) included in delivery: 1 x Clamping rail SL 120 (Length 600 mm) 1 x Fixed Jaw x Parallel jaw x Base Jaw Grip (with pendular function) + 1 x Base Jaw Grip (fixed) + 2 x facing jaws HM-coated Field of application Starter-Set 1. setting (raw material) form-closed clamping with grip inserts 2. clamping machined workpieces High retention force caused of HM-coating (friction)
28 28 Clamping Rail System SL 120 Product Range Clamping Rail System SL 120 Lenght in mm Order-No.: on request Parallel Clamping Jaw 120 jaw width 120 mm threads for adapting top and facing jaws jaw reverse side usable as fixed jaw Pull Down Jaw 120 jaw width 120 mm threads for adapting facing jaws jaw reverse side usable as fixed jaw Order-No.: Order-No.: Fixed Jaw 120 jaw width 120 mm threads for adapting top and facing jaws Cross Connector 120 jaw width 120 mm For adaption the clamping rail 90 with variable Pitch S positioning the jaws with exact serration Order-No.: Order-No.: Basisbacke Pendelfunktion jaw with 120 mm for adapting grip inserts for clamping raw material Basisbacke fest jaw with 120 mm for adapting grip inserts adapted on parallel clamping jaw Order-No.: Order-No.: Grip Insert for clamping raw parts form closed insertable into jaws and Grip height in mm 1,8 3,8 Order-No.: Clamping Insert HM-coated surface clamping of machined workpieces insertable into jaws und Height in mm 5,5 Order-No.: 21099
29 Product Range Clamping Rail System SL 120 Grip Facing Jaw 120 jaw width 120 mm for clamping raw surfaces HM-coated Facing Jaw 120 jaw width 120 mm for clamping parallel surfaces for a better frictional connection 29 Clamping Rail System SL 120 Order-No.: Order-No.: Top Jaw Steel geared jaw width 090 mm for clamping raw parts Step Jaw, fixed jaw witdth 120 mm for a higher clamping width use magnetic strip fo clamping jaw Order-No Order-No.: Order-No.: Order-No.: Base Jaw 5 AXIS (pair) jaw width 25 mm For 5-axis machining of small parts Grip Facing Jaw please order separate Grip Facing Jaw (pair) jaw width 25 mm für Base Jaw 5-AXIS (15339) attachement for Grip clamping Grip height in mm 3,3 4,8 Order-No.: Order-No.: Clamping Pot Adaption 120 for adaption the clamping pot 120 for applications with a variable Pitch S positioning the jaws with exact serration Worpiece Stop magnetic Position repeatable no interfering edges during producing Side Clamps (Set) for securing the clamping rail on the machine table Set consits on 6 pieces Order-No.: Order-No.: 19296
30 30 Clamping Rail System SL 120 Product Range Clamping Rail System SL 120 Base Jaw for Soft Jaws for adaption of soft jaws Order-No.: Top Jaw ALU for Base Jaw jaw width 120 mm for self-producing individual jaws Top Jaw Steel for Base Jaw jaw width 120 mm for self-producing individual jaws Order-No.: Order-No.: Top Jaw ALU 1/2 for Base Jaw jaw width 120 mm for self-producing individual jaws Top Jaw Steel 1/2 for Base Jaw jaw width 120 mm for self-producing individual jaws Order-No.: Order-No.: Facing Jaw ALU for Parallel Jaw jaw width 120 mm for self-producing individual jaws Facing Jaw Steel for Parallel Jaw jaw width 120 mm for self-producing individual jaws Order-No.: Order-No.: Magnetic Strips width 120 mm magnetic fixation and positioning Size = width / height 120/10 120/20 120/30 120/38 Order-No.:
31 Clamping Widths Clamping Rail System SL Order-No.: Order-No.: Clamping Rail System SL 120 Clamping Rail length Clamping width A 0-90 mm mm mm + Order-No.: Order-No.: Clamping Rail length Clamping width A 0-90 mm mm mm Order-No.: adapted on jaws Order-No.: Clamping Rail length Clamping width A mm mm mm with screw M8 x Artikel-Nr.: Artikel-Nr.: adapted on jaws Order-No.: Clamping Rail length Clamping width A mm mm mm
32 32 Clamping Widths Clamping Rail System SL 120 Clamping Rail System SL Order-No.: Order-No.: adapted on jaws Order-No.: Clamping Rail length Clamping width A mm mm Clamping width A (round material) > Ø 30 mm > Ø 30 mm > Ø 30 mm + Order-No.: Order-No.: Clamping Rail length Clamping width A (Step side) mm mm mm Order-No.: Note: Clamping widths reduced by use of facing jaws! Order-No.: Order-No.: Order-No.: Order-No.: Variable adjustment of Clamping Rails Note: Positioning withserration 2 mm! Order-No.: Clamping Rail length pitch A (clamping rails) mm mm mm
33 Application Examples 33 Clamping Rail System SL 120 Clamping Rail SL setting on rotating table Clamping Rail SL setting Grip clamping raw material Clamping Rail SL setting on Horizontal BAZ Clamping Rail SL setting on Horizontal BAZ
34 34 Clamping Rail System SL 80 The modular Clamping Rail System SL 08
35 35 0 Clamping Rail System SL 80
36 36 Clamping Rail System SL 80 The modular Clamping Rail System SL 80 Compact, modular structural form Clamping forces up to 24 kn Conventional and Gripclamping possilble Pairing accuracy 0,03 mm Due to exact serration rails continuously coupleable High precision, ground and hardened functional surfaces fastening bores M10 for ZeroClamp Zeropoint-System Pitch S 200 mm and grid angles / pallets (R 40/50 mm) Easy clamping using a torque wrench. torque (Nm) 6,0 12,0 17,5 25 clamping force (kn) Simple adjustement quick changing jaws ruler for quick positioning jaws on upper surface
37 The modular Clamping Rail System SL 80 Spannschiene SL 080 Positioning jaws with serration 2 mm Fixation jaw with side clamps fastening bores for adapting clamping bolts 12M10 37 Clamping Rail System SL 80 Length 260 mm incl. 2 support plates (Clamping on 1 pot) Length in mm Order-No.:
38 38 Clamping Rail System SL 80 Product Range Clamping Rail System SL 80 Pull-down Jaw 26 jaw width 26 mm threads for adapting facing jaws Order-No.: Pull-down Jaw 26 DUO jaw width 26 mm for clamping 2 workpieces threads for adapting facing jaws Order-No.: Pull-down Jaw 40 / 80 jaw width 26 mm threads for adapting facing jaws Order-No.: / Parallel Jaw 48 jaw width 48 mm threads for adapting facing jaws Order-No.: Parallel Jaw 80 jaw width 80 mm threads for adapting facing jaws Order-No.: 14536
39 Product Range Clamping Rail System SL 80 Fixed Jaw 26 jaw width 26 mm threads for adapting facing jaws 39 Clamping Rail System SL 80 Order-No.: Fixed Jaw 48 jaw width 48 mm threads for adapting facing jaws Order-No.: Fixed Jaw 80 jaw width 80 mm threads for adapting facing jaws Order-No.: Impress Jaw 80P jaw width 80 mm for clamping raw parts form-closed Order-No.: Base Jaw 80 jaw width 80 mm for adapting soft jaws Order-No.: 14131
40 40 Clamping Rail System SL 80 Product Range Clamping Rail System SL 80 Top Jaw ALU 80 jaw witdh 80 mm for self producing individual jaws Order-No.: Top Jaw Steel 80 jaw witdh 80 mm for self producing individual jaws Order-No.: Facing Jaw ALU 48 jaw witdh 58 mm facing jaw for parallel jaw for self producing individual jaws Order-No.: Facing Jaw ALU 80 jaw witdh 90 mm facing jaw for parallel jaw for self producing individual jaws Order-No.: Facing Jaw Steel 48 jaw witdh 58 mm facing jaw for parallel jaw for self producing individual jaws Order-No.: 14584
41 Product Range Clamping Rail System SL 80 Facing Jaw Steel 80 jaw witdh 90 mm facing jaw for parallel jaw for self producing individual jaws 41 Clamping Rail System SL 80 Order-No.: Grip-Facing Jaw 26 / 48 jaw width 26 / 48 mm facing jaw with grip inserts HM-Facing Jaw 26 / 48 jaw width 26 / 48 mm facing jaw carbide coated Size P 48 N F Grip-facing jaw Order-No.: Carbide coated jaw Order-No.: P = Vorsatzbacke einsetzbar auf Parallelspannbacke 48 N F = Vorsatzbacke einsetzbar auf Niederzubacke und Festbacke Carbide Coated-Facing Jaw 80 jaw width 80 mm for clamping parallel surfaces for a better frictional connection Order-No.: Grip facing jaw 80 jaw witdth 80 mm for clamping raw surfaces Order-No.: Facing Jaw serrated jaw width 80 mm for Parallel Jwa 80 and Fixed Jaw 80 for clamping raw parts Order-No.: 17010
42 42 Clamping Rail System SL 80 Product Range Clamping Rail System SL 80 Magnetic strips width 74 mm magnetic fixation and positioning Size = width / height 74/10 74/15 74/20 74/25 74/30 Order-No.: Magnetic strips width 94 mm magnetic fixation side positioning Size = width / height 94/10 94/15 Order-No.: Cross Connector 80 jaw width 080 mm For adaption the clamping rail 90 with variable Pitch S positioning the jaws with exact serration 2 mm Order-No.: 15421
43 Product Range Clamping Rail System SL 80 Workpiece Stop fixed 43 Clamping Rail System SL 80 Order-No.: Workpiece Stop adjustable Order-No.: Workpiece Stop magnetic Order-Nr.: 14116
44 44 Application Examples Clamping Rail System SL 80 2 Clamping rails on grid-plate Machining a monocast part on Horizontal machining centre 2 Clamping rails on a tombstone Machining a monocast part on Horizontal machining centre 2 Clamping rails on a tombstone Machining a monocast part on Horizontal machining centre Clamping Rails on a base unit Machning round parts on a vertical machining centre 4 Clamping rails on a tombstone Machining on Horizontal machining centre 2 Clamping rails on a tombstone Machining a monocast part on Horizontal machining centre
45 Application Examples 45 Clamping Rail System SL 80 Clamping Rails on dividing head Multipart clamping with a fourth Axis on Vertical machining centre Clamping Rails on Base Unit Clamping of complex parts 2 clamping rails on a base unit Machning plates on a vertical machining centre Clamping rail on a base unit Multipart clamping on Vertical machining centre Clamping Rails on Tombstone Clamping of complex parts Clamping rail on a base unit Multipart clamping on Vertical machining centre
46 46 The mechanical Dividing Head Dividing Head
47 47 Dividing Head
48 48 Dividing Head Dividing Head Dividing Head Dividing manually or using the machine spindle Positive interlocking, mechanical Clamping force 1000 Nm Division 144 x 2,5 Little weight (approx. 30kg), easy handling Fast changeover time using the zeropoint system Order-No.: 13030
49 Dividing Head 49 For extension as fourth axis for 3-axis machines. Changeover time < 20 min. Higher productivity in multi-side machining. No additional drive required. Maintenance an vibration free. External setting-up of the clamping beams. Component clamping using clamping beams or directly on the dividing head. Dividing Head air connection coupling G1/4 on backside mechanical drive Indexing 144 x 2,5 clamping pot 120 mm with indexation Supplied with clamping studs on bottom side Function: Lateral movement to one of 12 possible positions. Travel in Z - by 8 mm. This riggers the indexation. Required positioning accuracy ± 0,5 mm in X, Y, Z. Move in a circular path with R=25 mm in the XY-plane. For this, 30 at the input equals 2,5 at the outout. Rotation can be in either sense. Travel in Z + by 8 mm to index the dividing spindle again.
50 50 Dividing Head Product Range Thrust bearing for dividing head Dividing Head Bearing to adjust the clamping blocks High support moment Supplied with clamping studs Order-No.: Clamping Rail SL 120 with double sided serration complete jaw programm usable minor pivoting radius delivery including adapter Order-No.: Clamping block (unmachined) Size = Block length mm Order-No.: Connection geometry unmachined Supplied with: Locating pin and shaft for thrust bearing. Clamping block (machined) Size = Block length mm Order-No.: Connection geometry machined for double-sided taking of clamping rails Supplied with: Locating pin and shaft for thrust bearing. Clamping block ( Spanntöpfen 120 mm) Size = Block length mm 600 special versions Order-No.: on request with 6 integral clamping pots 120 mm with Indexation Supplied with: Locating pin and shaft for thrust bearing.
51 Application Examples 51 Dividing Head withsk 40 Adaption additional axis on Horizontal BAZ (5-side machining in one setting) Dividing Head Dividing Head with clamping block Fourth axis on Vertical BAZ Dividing Head with clamping rail fourth axis on Vertical BAZ with Clamping rail system SL 80 (Machining of 28 workpieces)
52 52 Automation and Monitoring Automation and Monitoring Controll-Units for monitoring Control-units are available for a manual or an automated application. The following functions can be controlled or monitored. - status monitoring locked / unlocked - status monitoring planned assets - blow-out function (cleaning function) - link to machine control unit (only automated version) - sealing air (only automated version)
53 Automation and Monitoring 53 Automation and Monitoring Control-System and Automation For automation several functions are controllable or usable for monitoring. Sensor technology (digital / analog) is arbitrary. The following functions are controllable: - status monitoring locked / unlocked - status monitoring planned assets - blow-out function (cleaning function) - link to machine control unit
54
55
56 All rights for Design, Photos and Texts with the publlisher ZeroClamp GmbH. Subject to alterations without prior notice! Printed in Germany. ZeroClamp GmbH Wadlhausen 14 D Icking Tel: +49 (0) Fax: +49 (0) info@zeroclamp.com
5-axis clamping system compact
5-axis clamping system compact 395 5-axis clamping system compact Function We are setting standards with the new KIPP 5-axis clamping system compact in this field. The system was specifically designed
More informationModular Clamping Rail System SL120 & SL080
Original Installation and Operating Instructions Modular Clamping Rail System SL120 & SL080 Copyright ZEROCLAMP Modular Clamping Rail System Installation and Operating Instructions. These operating instructions
More informationZeroClamp. machine tool components
ZeroClamp machine tool components Even at a low $80 dollar hourly rate, every minute the spindle isn t turning is costing you more than $1 dollar... The tailor-made solution How do you increase machine
More informationZero Point Clamping System. ZERO lock BALL lock
Zero Point Clamping System ZERO lock BALL lock kap3 kap 263 Technical information regarding ZERO lock Zero Point Clamping System Application The modularly designed, flexible ZERO lock Zero-Point Clamping
More informationClamping devices 521
Clamping devices 521 522 Product overview Clamping devices Adjustable straps K0001 Hook clamps K0012 Goose-neck straps with long slot K0002 Page 526 Hook Clamps with collar K0013 Page 535 Equipped clamps
More informationSTAMPING TECHNOLOGY - CLAMPING RAW PARTS
simple. gripping. future. 5-Axis 66 Makro Grip Stamping Unit 72 Stamping Unit for the workbench 73 Stamping Unit on trolley 76 Stamping Unit Accessories 77 Stamping Jaws 78 Makro Grip 5-Axis-Vices 82 5-Axis
More informationWM en. Zero point clamping system SPEEDY airtec 1
SPEEDY airtec 1 GO! Maximum productivity Using the zero point clamping system SPEEDY classic you will increase your productivity to a maximum. Adjustment and checking processes are no longer necessary
More informationWM en. Zero point clamping system system 3000
Zero point clamping system system 3000 unique push-on very strong automatic monitoring flush mounted SPEEDY and spigot handling without interfering contour 50kN retention force suitable for automation
More informationExample workpieces: - Gearbox casing. Example format: - Diameter 800 mm
RADIAL CHUCKS SAV 260.99-RSF 3 + 3 JAW CHUCKS - 3 + 3 jaw chuck with two independently actuated clamping circles - Easily adaptable from centred to balanced operation - Jaw stroke 15 mm (Stroke per jaw)
More informationPrecision Chucks for Improved Accuracy and Increased Productivity
Precision Workholding Technology Precision Chucks for Improved Accuracy and Increased Productivity Precision Air Chucks (Self Contained Design) MicroCentric Precision Air Chucks feature a patented open
More informationTOOL CLAMPING SYSTEMS
TOOL CLAMPING SYSTEMS 2017 NEW RÖHM eshop First B2B eshop of the clamping technology industry Buy RÖHM products online 24/7 Order as a guest customer without registration Intuitive search and filter function
More informationModular clamping and positioning system for milling machines and machine tool. flexible
Modular clamping and positioning system for milling machines and machine tool flexible Titan 125 Everything under control The new Allmatic TITAN 125 high pressure vice combines virtually all the features
More informationVice novelties Clamping technology for NC machining. driven by technology
Vice novelties Clamping technology for NC machining http://www.roehm.biz/schraubstockneuheiten driven by technology RKE NC-Compact vices The new NC-compact vice RKE: optimized design with proven quality.
More information5-AXIS MACHINING SCS QUINTUS WWW. WORKHOLDINGSOLUTIONSGROUP. COM
WORKHOLDING SOLUTIONS FOR -AXIS MACHINING SCS MC QUINTUS ONE system / MANY solutions WWW. WORKHOLDINGSOLUTIONSGROUP. COM MCCLAMPING S YSTEM for -axis machining MC + Quintus... MC Clamping System Free access
More informationQUICK, FLEXIBLE AND COPLANAR
EASY-CLAMPING BASE BENEFITS» quick adaption» modular clamping system for various combinations» use with standard clamping systems Easy-clamping base M Easy-clamping base L Easy-clamping base XL QUICK,
More informationno mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable
More informationIDEAL FOR 5-AXIS MACHINING
IDEAL FOR 5-AXIS MACHINING Without additional foundations or special jaws, the RZM centric vice holds the workpiece securely and does this with a minimal interference contour. The clamping spindle is located
More informationAir precision chucks APC
Air precision chucks APC MicroCentric GmbH Berblingerstr. 16 71254 Ditzingen / Germany Tel.: +49 (0)7156 17819-0 Fax: +49 (0)7156 17819-20 E-Mail: info@microcentric.de www.microcentric.de Products in this
More informationCLAMPING TECHNOLOGY Individual special clamping tools
CLAMPING TECHNOLOGY Individual special clamping tools 1 QUALITY SINCE 1958 Know-how, the highest quality and first class engineering. We see ourselves as a system supplier and offer our customers a full
More informationbcprecision Devices, Inc. HYDRAULIC ARBORS AND CHUCKS
UNEQUALED WORK HOLDING ACCURACY for: grinding; balancing; inspection; boring; facing; reaming; drilling; turning; shaving; hobbing and honing b SQUARENESS r CONCENTRICITY f PARALLELISM e ROUNDNESS v ALIGNMENT
More informationMarch weeks. surcharge for
March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not
More information5-Axis Machine Tools from SMW-AUTOBLOK
5-Axis Machine Tools from SMW-AUTOBLOK 5-Axis Machine Tools ensures the following advantages: Ideal suitable for OP 10 use ST5-2G also suitable for OP 20 use Jaws with SinterGrip clamping inserts for clamping
More informationPATENT EP COMPENSATING CHUCKS OVEKA & KA
PATENT EP1 190 815 COMPENSATING CHUCKS OVEKA & KA COMPENSATING CHUCKS For centric cylindrical, orbital pin or form grinding of complex shaft-type components, the workpiece is generally ground between centers.
More information50, ,000 18,800 8,000. CODE 04 ER (ER ) UPC Chuck/W ITS Central Chuck. CODE 04 ER (ER ) UPC Pallet For Alignment
CODE 04 ER-007826 (ER-017777) UPC Pallet For Alignment CODE 04 ER-007823 (ER-016092) UPC Chuck/W ITS Central Chuck Application To align angular position and to determine the center of UPC chucks. Please
More informationNEW DURO-TA XT KEY BAR CHUCK. The flexible lightweight for large and small workpieces
NEW DURO-TA XT KEY BAR CHUCK The flexible lightweight for large and small workpieces DURO-TA XT KEY BAR CHUCK To meet the requirements of turning and milling machines for flexibility, workpiece accessibility
More informationCLAMPING SYSTEM 9000 MODULAR ZERO POINT CLAMPING SYSTEM FOR PALLETS, WORKPIECES AND FIXTURES R E F E R E N C E S Y S T E M S
R E F E R E N C E S Y S T E M S CLAMPING SYSTEM 9000 Modular Zero-Point Fixturing for Pallets, Workpieces and Fixtures MODULAR ZERO POINT CLAMPING SYSTEM FOR PALLETS, WORKPIECES AND FIXTURES FIXTURING
More informationOverview Grinding Applications
GRINDING 14E Overview Grinding Applications SRG Workpieces High precision grinding Steady Rests Grinding diameter Ø 20-85 mm Camshafts Crankshafts Shafts Chapter 1 Fine adjustment of the grinding center
More informationPRODUCTION VISES. Vises. Bock Quick Change Fixturing. 5-Axis Production Vises
Vises Introduction to Design... 74 75 VMC/HMC Solutions...76 77 Ball Lock Mounting System...78 79 Production Vises 4" (100 mm) Production Vises... 80 81 6" (150 mm) Production Vises...82 83 Self Centering
More informationHigh Precision Air Chucks
Precision Workholding Solutions High Precision Air Chucks www..com Improve productivity and lower the cost of secondary machining operations..... through high concentricity. Holding close concentricity
More informationIDEAL FOR 5-AXIS MACHINING
IDEAL FOR 5-AXIS MACHINING Without additional foundations or special jaws, the RZM centric vice holds the workpiece securely and does this with a minimal interference contour. The clamping spindle is located
More informationHigh Precision Diaphragm Chucks
Precision Workholding Technology High Precision Diaphragm Chucks Unique Diaphragm Chuck Design MicroCentric Improving the quality and efficiency of secondary machining operations.... through high workpiece
More informationClamping bolts Eccentrical cams clamping units
2.3 Shaft Clamping bolts Eccentrical cams clamping units 2.9 2.8 2.7 2.6 2.5 2.4 2.3 2.2 2.1 2.3 Clamping bolts, Eccentrical cams, Shaft clamping units Page 641 2.3 Clamping bolts, Eccentrical cams, Shaft
More informationPull-down clamps. No Low height clamping jaws, model Bulle
Pull-down clamps The wedge action of clamping jaws is the characteristic feature of these pull down clamps. It causes the pull down effect, which presses the workpiece against both, stop and machine table.
More information. Dimensions of the Machine Spindle Heads in Compliance with DIN The most recent editions of the DIN standards are binding.
Clamping technology. Dimensions of the Machine Spindle Heads in Compliance with DIN The most recent editions of the DIN standards are binding. DIN 55026 Taper sizes 4 and above with drive tang. Spindle
More informationKTM-16/20 TECHNICAL DATA
TECHNICAL DATA Table Diameter : 1,600mm Max. Turning Diameter : 2,000mm Max. Turning Height : 1,750mm Table Indexing Degree : 0.001mm CNC Controller : FANUC 18i-TB ** Bed The bed has symmetrical structure
More informationOPERATING INSTRUCTIONS 5-AXIS CLAMPING SYSTEM + ACCESSORIES
OPERATING INSTRUCTIONS 5-AXIS CLAMPING SYSTEM + ACCESSORIES 1 Contents 1. Introduction 2. Safety instructions and precautions 3 Operating the clamp 3.1 Clamp set up 3.2 Sequence for clamp set up 3.3 Adjusting
More informationThe new generation with system accessories. Made in Europe!
1 The new generation with system accessories. Made in Europe! Of cast iron, wide-legged prismatic guide. For vibration-free work even at high loads. Rear flange for mounting the mill/drill head PF 230.
More informationInstallation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602
596 597 Installation Tools Pipe Cutters for steel and cast iron pipes 598 Pipe Cutters / Pipe Deburring Reamer for stainless steel pipes 600 Pipe Cutters / Pipe Deburring Reamer / Calibrating Tool for
More informationKesel Clamping Systems
Kesel Clamping Systems CLAMPING SYSTEMS Kesel ARNO Kesel CNC Kesel NCA Kesel Bull Kesel ZS Kesel Syncroline Kesel USS Kesel Tradition and modernity A strong company, a strong group We have been at home
More informationThe new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
More informationSave Set-up Time... and More!
System Bock Save Set-up Time... and More! Bock Locator Plates The foundation for quick change workholding efficiency. The Bock Locator Plate is a hard coated aluminium subplate with precision bored and
More informationTHe BeST OF THe BeST OF NeW. NeW. NeW. empowered. by precision. empowered precision. empowered. A selection of our most popular products
THe BeST OF 2018 A selection of our most popular products THe BeST OF 2017 selection of of our our most most popular popular products products AA selection To view the complete complete range range visit
More informationCentering Clamping Fixture
Original Installation and Operating Instructions Centering Clamping Fixture 120-22424 Copyright ZEROCLAMP Centering Clamping Fixture 22424 Installation and Operating Instructions. These operating instructions
More informationEnsat driving tools...
nsat driving tools... On this page, you can configure the optimum tool for your application. A configuration is provided in the following as an illustrative example. The article number is composed of two
More informationinnovations 2013 More than 100 innovations in the fields of: - Cassette buffer magazines - Zero-Point Clamping Systems - Hydraulic Clamping System
innovations 2013 CLAMPING. SCREWING. LOCKING. More than 100 innovations in the fields of: - Cassette buffer magazines - Zero-Point Clamping Systems - Hydraulic Clamping System - Grippers - and much more...
More informationFace Drivers with appropriate changable parts and accessories
8 NEIDLEIN-SPANNZEUGE GmbH www.neidlein.de 9 Face Drivers with appropriate changable parts and accessories FSB FFB FSP FFBR FDNC FOR TURNING AND HARD TURNING WITH DRIVE PINS Face Drivers FSB / SB 10 Face
More informationadaptivemechanical adaptive
Mechanical clamping elements mechanical 6 Content Product group 6 Sliding clamp, mechanical 6.2210 Clamping block, mechanical 6.2212 High-pressure spindle, mechanical with integral wedge system 6.2270
More informationCompatibility overview of accessories for milling machines
Compatibility overview of accessories for milling machines Accessories Item No. BF16 BF20/L MB4 F40E BF30 MT3 BF30 ISo30 BF46 ISO40 BF46 MT4 MF1 MT 50 MT2BV MF2 MF4 MT100 MT 200 MT 8 MX 3 MX 4 MT8 Copy
More informationOIL AND GAS. Clamping technology for crude oil and natural gas industries
OIL AND GAS Clamping technology for crude oil and natural gas industries CRUDE OIL AND NATURAL GAS - THE ENERGY OF TODAY RÖHM is the specialist for clamping technology with a wide product range, unrivaled
More informationTechnical features. Positive Taper Lock System for manual tool clamping. Technical features:
clamping set Technical features The RÖHM- was specially designed for the positive taper lock clamping taking particulary into account the necessity of manual clamping. Technical features: strong design
More informationROEMHELD Group Program Summary
ROEMHELD Group Program Summary PRODUCTS FOR PRODUCTIVITY Workholding elements Hydraulic cylinders Workholding systems Machine vises Zero point clamping systems Clamping power units Hydraulic components
More informationCORDIPAR. Universal Length Measuring Instruments. From our range. KORDT GmbH & Co. KG Preyerstraße D Eschweiler / GERMANY
From our range External Thread Measuring Gauges from 2-996 nominal diameter Internal Thread Measuring Gauges from - 1026 nominal diameter Thread Depth Gauges to check thread depth of bores Thread Setting
More informationVario Tec jaws Page 128. Vario Tec accessories Page 129. Super Vario vice Page 132. Grip Fix. Makro Grip. Quick Point. Quick Tower.
124 jaws Page 128 accessories Page 129 Quick Point Super Vario vice Page 132 Clean Tec Quick Tower Automation Makro Grip Grip Fix A system for all common vices How does it work? The pins are blown out
More informationROOP LAL Unit-6 Lathe (Turning) Mechanical Engineering Department
Notes: Lathe (Turning) Basic Mechanical Engineering (Part B) 1 Introduction: In previous Lecture 2, we have seen that with the help of forging and casting processes, we can manufacture machine parts of
More informationKesel Clamping Systems
Kesel Clamping Systems CLAMPING SYSTEMS Kesel ARNO Kesel CNC Kesel NCA Kesel Bull Kesel ZS Kesel Syncroline Kesel USS Kesel A strong company, a strong group Kesel Managing Director Martin K. Klug The people
More informationOperating instruction for the quick-change tap holders type:
type: KSN 0 KSN 1 KSN 3 KSN 4 KSN 5 Date of edition: 01.02.2008 Stage of alteration: 1 Please keep this for future use! Contents: 1 Application range, safety instructions and technical data... 3 1.1 Application
More informationThe new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
More informationPATENT EP Compensating Chuck Retractable OVEKAV / OVARZV
PATENT EP1 190 815 Compensating Chuck Retractable OVEKAV / OVARZV COMPENSATING CHUCK - RETRACTABLE The OVEKAV / OVARZV retractable compensating chucks made by SwissChuck are unique! These chucking systems
More informationWM / Zero point mounting system SPEEDY metec
WM-020-294 / 04.2008 Zero point mounting system SPEEDY metec 2 Informations SPEEDY metec 1 / 2 / 3 Content and overview of order no. SPEEDY metec 1 Page Order no. SPEEDY metec 1 4 2000 001 Insertion nipple
More information» Modular clamping elements for optical or optical/tactical measurement» For high-precision edge measurements in reflected and transmitted light
» Modular clamping elements for optical or optical/tactical measurement» For highprecision edge measurements in reflected and transmitted light» Toothed rails as workpiece stops or for fastening clamping
More informationUnlocking the full potential of your machines
215 EROWA ITS chuck - simple, practical, good 216 EROWA ITS chuck simple, practical, good s Handling Manual Loading facility Robot Milling / turning Function Drilling / milling Experience shows that precision
More informationCompatibility overview of accessories for milling machines
Compatibility overview of accessories for milling machines Accessories Item No. BF16 BF20/L MB4 F40E BF30 MT3 Copy and planing cutter head MT 2 3350212 BF30 BF46 BF46 ISo30 ISO40 MT4 MF1 MT 50 MT2BV Mf2
More informationCLAMPING TECHNOLOGY SPECIAL SOLUTIONS
CLAMPING TECHNOLOGY SPECIAL SOLUTIONS BESPOKE SPECIAL SOLUTIONS You define the task and we develop and implement the solution! Special clamping chucks are tailor-made products. They are adapted to your
More informationProduct Overview. for perfect connections
Product Overview for perfect connections TOOL HOLDERS FOR DRILLING, TAPPING & REAMING Smart solutions for high quality clamping systems in tapping applications Tapping solution range from M1 M200 Quick
More informationHEICO FASTENING SYSTEMS. Simple Fast Reliable HEICO-TEC TENSION NUT
HEICO FASTENING SYSTEMS Simple Fast Reliable HEICO-TEC TENSION NUT WWW.HEICO-TEC.COM HEICO-TEC TENSION NUT SIMPLE FAST RELIABLE For a secure joint with a HEICO-TEC tension nut, no electric, hydraulic,
More informationZero-Point Clamping Systems.
www.halder.com Halder Zero-point Clamping Systems Coupling elements for clamping and at the same time centring jigs and fixtures, developed as a quick-change system for shortening set-up times. Referenced
More informationSTEVENS SUBPLATES. STEVENS ENGINEERING, INC. TOLL-FREE WEB FAX
STEVENS SUBPLATES Spacing of hole patterns on Stevens accessories is identical to the pattern on Stevens Subplates. Insertion of the pull dowels thru bushed holes in the accessory into corresponding bushed
More informationPF 3000 Face Milling Cutter
Perfection in machining PF 3000 Face Milling Cutter UHRIN YOUR WORLD-WIDE PARTNER ADVANTAES axially adjustable inserts standard tool Ø 63 250 available ex-stock reduced spindle loading thanks to light
More informationGF Machining Solutions. System 3R palletizing systems with Spreitzer clamping solutions
GF Machining Solutions System 3R palletizing systems with Spreitzer clamping solutions Workpiece clamping solutions to increase productivity The advantages of a palletable workpiece clamping solution //
More informationTools for Clamping between Centers process oriented for turning, hard turning, grinding and milling
www.neidlein.de Tools for Clamping between Centers process oriented for turning, hard turning, grinding and milling Process oriented clamping solutions with maximum torque transmission and supreme accuracy
More informationTHE FUTURE RIGHT NOW PRECISION lathes, drilling- and milling machines
THE FUTURE RIGHT NOW PRECISION lathes, drilling- and milling machines turning milling drilling WABECO lathes > D2000 D2400 D3000 precise lead screw lathe in-house design and production the classics - tried
More informationINSTRUCTIONS FOR USE A1 & A2 KNURLING TOOLS
INSTRUCTIONS FOR USE A1 & A2 KNURLING TOOLS Contents CONTENTS 1. General... 2 1.1 Introduction... 2 1.2 Tool Construction... 3 2. A1-Tools... 5 2.1 Technical Data... 5 2.2 Overview: Main Components...
More informationThe Ensat self-tapping threaded
The nsat self-tapping threaded insert nsat is a self-tapping threaded insert with external and internal threads,cutting slots or cutting bores. A continuous process of further development has brought about
More informationTurning and Lathe Basics
Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of lathe principles and be able to identify the basic tools and techniques
More informationAlways a step ahead... because zero point clamping has an origin!
Always a step ahead...... because zero point clamping has an origin! COMPACT RELIABLE FLEXIBLE STARK zero point clamping systems INNOVATIONS & SOLUTIONS www.stark-inc.com Zero point-based flexibility due
More informationFace Drivers FSP / FSPB
4 Face Drivers FSP / FSPB NEIDLEIN-SPANNZEUGE GmbH Face Drivers FSP / FSPB with drive disk and movable center pin The entire surface of the workpiece can be tooled and finished by clamping with a maximum
More informationMACHINE TOOL ACCESSORIES
VERTICAL 5-C COLLET VISE SERIES 344: VERTICAL 3-C COLLET VISE SERIES 344: : 2-1/2 x 7-3/4 Height: 4 Small movement of lever opens or closes collet. 2030000 CAM OPERATED 5-C HORIZONTAL/VERTICAL COLLET FIXTURE
More informationWM en. Zero point clamping system SPEEDY hydratec 1
Zero point clamping system SPEEDY hydratec 1 GO! Maximum productivity Using the zero point clamping system SPEEDY hydratec you will increase your production times to a maximum. This clamping element stands
More informationMachine tooling technology. Zero point clamping system SPN THE KNOW-HOW FACTORY.
Machine tooling technology Zero point clamping system SPN THE KNOW-HOW FACTORY www.zimmer-group.com ORDER INFORMATION ZERO POINT CLAMPING SYSTEM SPN STRUCTURE OF THE ORDER NUMBER ORDER NUMBER SAMPLE SP
More informationSPIETH Locknuts. Series MSW. Works Standard SN 04.03
SPIETH Locknuts Series MSW Works Standard SN 0.03 SPIETH Locknuts Series MSW SPIETH locknuts offer a range of technical benefits, qualified by their special system and production. Under high levels of
More informationWorld leader in live tools, angle heads, and multi-spindle drill heads
World leader in live tools, angle heads, and multi-spindle drill heads heimatec GmbH headquarters-germany The Way to Success Heimatec is an international manufacturing company headquartered in Renchen,
More informationNEWS Part. N /0 MINITEC NEWS
NEWS 2009 Part. N 95.0423/0 MINITEC NEWS 2009 1 TABLE OF CONTENT INTRODUCTION CONTENTS 3 END CAP Z WITH HAMMER TAPS 3 END CAP 45X45 VA 4 ANGLE 25 GD-Z 4 ANGLE 45X90 GD-Z 5 ANGLE 90 GD-Z 5 HINGE 19 S 6
More informationCatalogue NE 0506 FIXTURING SYSTEM. Modular Zero-Point Fixturing for Pallets, Workpieces and Fixtures
Catalogue NE 0506 FIXTURING SYSTEM Modular Zero-Point Fixturing for Pallets, Workpieces and Fixtures Modular Zero Point Fixturing System 9000 Changes in Seconds Constant zero point without realignment
More informationIndustrial Drill Chucks with Key. For Stationary Machines and Portable Drilling Machines. Diameter (mm)
Drilling Industrial Drill Chucks with Key For Stationary Machines and Portable Drilling Machines Specifically designed for stationary drilling, turning, milling and wood working machines The one-piece
More informationAlufix Basic Sets offer a variety of application possibilities based on the quantity of components (from 19 to over 440) and their composition
ALUFIX BASIC SETS 2 ALUFIX BASIC-SETS Alufix Basic Sets offer a variety of application possibilities based on the quantity of components (from 19 to over 440) and their composition ALUFIX BASIC-SETS Note:
More information. Dimensions of Machine Spindle Heads in Compliance with DIN The most recent editions of the DIN standards are binding
ß Clamping tools. Dimensions of Machine Spindle Heads in Compliance with DIN The most recent editions of the DIN standards are binding DIN 5506 Taper sizes 4 and above with driver. Spindle No. of holes
More informationPRODUC TION VISES. Vises. 5-Axis Production Vises
Introduction to Design...104 105 VMC/HMC Solutions...106 107 Ball Lock Mounting System...108 109 Production Vises 4" (100 mm) Production Vises...110 112 6" (150 mm) Production Vises...113 115 Short 6"
More informationDIATEST TUV. Please read carefully and keep it. It is worthwhile. DIN EN ISO 9001 : 2000 Reg.-Nr
DIATEST OPERATING INSTRUCTIONS and examples for application Split-ball probes Floating holders Checking stands Accessories Precision bore gauges range 0.47 41.1 mm 0.0185 1.62 Please read carefully and
More informationEfficient workholding. Collet Chucks Mandrels Collets
TM Efficient workholding ollet hucks Mandrels ollets Index ollet huck Index of Klamp Products ollet hucks Q & Series Page 3 Quick hange ollet hucks QRL Series Page 4-7 Short Series ollet hucks RS Series
More information3D SENSORS 2-in-1 3-AXIS EDGE FINDER & MEASURING INSTRUMENT.
3D SENSORS 2-in-1 3-AXIS EDGE FINDER & MEASURING INSTRUMENT www.haimer-usa.com HAIMER Sensors Benefits 1. No math needed Zero on the indicator = Zero on the machine control The sensor is pre-calibrated
More informationACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS
ACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS SKODA LIVE CENTERS SKODA & STM HEAVY DUTY LIVE CENTERS - CSN 243324 Features The rotating spindle is extended right through the tapered shank Two
More informationPUNCHING DRILLING HEBEN LIFTING CUTTING DEBURRING
PUNCHING DRILLING LIFTING CUTTING DEBURRING www.alfra.de E-EN E ALFRA Edge-Milling and Deburring Devices Overview KFV KFH 150 Page 7 78 2520 25100 Prism mounting L = 150 / W = 20/40 End mill Ø 45 or straight
More informationTURNING BORING TURNING:
TURNING BORING TURNING: FACING: Machining external cylindrical and conical surfaces. Work spins and the single cutting tool does the cutting. Done in Lathe. Single point tool, longitudinal feed. Single
More informationNEW RÖHM VICE NOVELTIES. RKE-M and RZM (size 92)
NEW RÖHM VICE NOVELTIES RKE-M and RZM (size 92) NC-COMPACT-VICE RKE-M MANUALLY OPERATED APPLICATION Particularly suitable for use on machining centers and palletisers. TYPE Clamping system mechanical without
More informationSTAMPING TECHNOLOGY - CLAMPING RAW PARTS
simple. gripping. future. 5-Axis 66 Makro Grip Stamping Unit 72 Stamping Unit for the workbench 73 Stamping Unit on trolley 76 Stamping Unit Accessories 77 Stamping Jaws 78 Makro Grip 5-Axis-Vices 82 5-Axis
More informationLathes. CADD SPHERE Place for innovation Introduction
Lathes Introduction Lathe is one of the most versatile and widely used machine tools all over the world. It is commonly known as the mother of all other machine tool. The main function of a lathe is to
More informationTHE MOST IMPORTANT FACTS ABOUT SUPPORT BLOCKS
THE MOST IMPORTANT FACTS ABOUT SUPPORT BLOCKS > Material: High quality tempering steel resp. castings. > Machining: All support blocks shown, have machined base- and contact faces. The serrated elements
More informationLightweight HSC milling cutter for a perfect surface finish. flycutter - system eco
Lightweight HSC milling cutter for a perfect surface finish flycutter - system eco 2 milling FlyCutter - System Eco mapal FlyCutter - System Eco The FlyCutter series represent a new dimension in face milling
More informationDBF Machining Centers DBF 630 / 800
DBF Machining Centers DBF 630 / 800 2 DBF Machining Centers Turning / drilling / milling The Horizontal Machining Centers HEC 500 / 630 / 800 Athletic can be used as all-round machining centers in a versatile
More informationScrewdriver Function Module for the automatic Screw-Assembly
Screwdriving Technology Automation Air Motors Air Tools Screwdriver Function Module for the automatic Screw-Assembly n wide product variety for all applications n maximum ease of integration n service
More information