MADE IN MONTANA, USA. No. 12. Print is available on pg. 9. (406) csharpsarms.com

Size: px
Start display at page:

Download "MADE IN MONTANA, USA. No. 12. Print is available on pg. 9. (406) csharpsarms.com"

Transcription

1 MADE IN MONTANA, USA No. 12 Print is available on pg. 9 (406) csharpsarms.com info@csharpsarms.com

2 1874 SHARPS HARTFORD sporting rifle RIFLE DESCRIPTION: Shown with 30" No. 1 Heavy Barrel, with Hartford Collar Blade Front, and Buckhorn Rear Sights 2,195* Available with 26, 28 or 30 Tapered Octagon Barrel, Double Set Triggers, Drilled and Tapped for Optional Tang Sights. Hartford semi crescent Military & Sporting Smooth Steel butt plate and silver nose cap, straight grain American walnut with oil finish, Length of pull approx. 14. metal finish; Receiver group & Butt plate color case hardened. Barrel Blued. Overall length: 47 inches (with 30 barrel, shown). Approximate weight: 10.5 lbs. 30" No 1 Heavy Octagon Barrel with Hartford Collar SHARPS BRIDGEPORT sporting rifle RIFLE DESCRIPTION: Shown with No. 1 Heavy Barrel and Blade & Buckhorn Sight Available with 26, 28 or 30 Standard Tapered Octagon Barrel, Double Set Triggers, Drilled and Tapped for Optional Tang Sight. Butt Stock is Straight Grip, Bridgeport Checkered Steel Butt Plate, Length of pull is 14 approximately. Forend: Schnabel Style. Wood: Straight Grain Walnut. Metal Finish: Receiver & Butt Plate Color Case Hardened. Barrel: Blued. Overall length: 47 inches (with 30 barrel, shown). Approximate weight: 10.5 lbs. 1,995* Bridgeport Pistol Grip with cheek rest 2 * Note: Federal Excise Tax, State and Local Taxes and Shipping not included in above prices.

3 1874 Carbine Hunters Rifle 1,925* Net Rifle Cost RIFLE DESCRIPTION: Cal 38-55, & straight, & Barrel length 22, 24 & 26, tapered round military style with sporting Full Buckhorn & Silver Blade Front Sights Semi Cresent Military Style Steel Buttplate slender forend, color cased receiver. Blued Barrel & Double Set Triggers, drilled & tapped for Tang Sight. Also Available with single Trigger & Small Lever SHARPS semi custom classic hartford sporting rifle CALIBERS: Shown with 30 Standard Barrel, and optional Blade & Buckhorn sights , 40-65, Straight or Bottleneck, & (Larger chamberings are not recommended on this stock configuration) 2,595* RIFLE DESCRIPTION: Available with 26, 28 or 30 Tapered octagon barrel, double set triggers or single trigger with small lever, drilled and tapped for optional tang sight. Hartford style crescent butt with toe plate (in steel or brass) cheekrest with accent line and silver nose cap. Straight grain American walnut with oil finish, Length of pull approx. 14. metal finish; Receiver group & butt plate color case hardened. Barrel Blued. Overall length: 47 inches (with 30 barrel, shown). Approximate weight: 10.5 lbs. For options, accessories and ordering information, see Prefix. Showing left side Cheek Rest and Brass Butt 3

4 1875 sharps sporting Rifle STANDARD RIFLE DESCRIPTION: Shown with 30 Barrel, Buckhorn Rear Sight, and Blade Front Sight Set. Receiver with Round Crown, available with 28 or 30 Standard Tapered Octagon Barrel, Single Trigger, Drilled and Tapped for Optional Tang Sight. Butt Stock is Straight Grip, Bridgeport Checkered Steel Butt Plate. Length of pull is 14 approximately. Forend: Schnabel Style. Wood: Premium Straight Grain Oil Finished American Walnut. Metal Finish: Receiver Group & Butt Plate Color Case Hardened. Barrel: Blued. Overall length: 47 inches. Approximate weight: 9 lbs., 4 oz. 1,475* Optional 1875 Model Pistol Grip and Cheek Rest Butt Stock 1875 sharps classic Rifle CLASSIC RIFLE DESCRIPTION: Shown with 30 Barrel, Buckhorn Rear Sight, and Blade Front Sight Set. 1,775* Receiver with Octagon Top, available with 26", 28", or 30" Standard Tapered Octagon Barrel, Single Trigger, Drilled and Tapped for Optional Tang Sight. Butt Stock is Straight Grip with Crescent Butt and Toe Plate. Length of pull is 14" approximately. Forend: Hartford Style with Silver Nosecap. Wood: Premium Straight Grain Oil Finished American Walnut. Metal Finish: Receiver Group & Butt Plate Color Case Hardened. Barrel: Blued. Overall length: inches. Approximate weight: 9 lbs., 8 oz. 4 * Note: Federal Excise Tax, State and Local Taxes and Shipping not included in above prices.

5 Model 1875 Target & Sporting Rifle RIFLE DESCRIPTION: Shown with optional Deluxe Mid-Range Tang Sight, Globe w/spirit Level Front Sight, and 30 Heavy Round Barrel 1,425* Net Rifle Cost Calibers 38-55, 40-65, Straight or Bottleneck, & Barrel, 30 Heavy tapered round, American walnut w/pistol Grip & Sharps Old Reliable black butt plate color cased receiver group drilled & tapped for Sharps Tang sight. Barrel with blued finish. Single trigger. Approx rifle weight 11 lbs highwall and lowwall sporting Rifle STANDARD RIFLE DESCRIPTION: 1,875* Receiver with Octagon Top, available with 26, 28 or 30 Tapered Full Octagon Barrel, Single Trigger, Drilled and Tapped for Optional Tang Sight. Butt Stock is Straight Grip, Bridgeport Checkered Steel Butt Plate, Length of pull is 14 approximately. Forend: Schnabel Style. Wood: Premium Straight Grain Oil Finished American Walnut. Metal Finish: Receiver Group & Butt Plate Color Case Hardened. Barrel: Blued. French Grey Receiver available. Overall length: 47 inches. Approximate weight: 9 lbs., 4 oz highwall and lowwall classic Rifle CLASSIC RIFLE DESCRIPTION: Shown with optional French Grey Receiver, Barrel Sights, and Pistol Grip Buttstock. Highwall shown. 1,975* Same as above Standard Rifle except for Crescent Butt with Cheek Rest and Silver Inlay in Forend Tip. Above rifle shown with pistol grip, French grey receiver and blade and buckhorn sights. Pistol grip with silver inlay and cheek rest is available on the 5 classic model for an additional 165.

6 1885 lowwall schuetzen rifle 2,875* STANDARD SCHUETZEN DESCRIPTION: Receiver may be octagon or round top depending on barrel. Color cased receiver group and Schuetzen butt plate with bottom tang. Barrel blued with matte finish adjustable palm rest. Standard length of pull is 14, barrel length 24, 26, 28, 30. Full tapered octagon. Standard wood is straight grain American Walnut, and pistol grip. Cal.22 L.R., 22 Hornet, WCF, SS (Shown with optional part octagon barrel, French grey receiver group & butt plate.) 1885 highwall schuetzen rifle 2,875* STANDARD SCHUETZEN DESCRIPTION: Receiver may be octagon or round top depending on barrel. Color cased receiver group and Schuetzen butt plate with bottom tang. Barrel blued with matte finish adjustable palm rest. Standard length of pull is 14, barrel length 24, 26, 28, 30. Full tapered octagon. Standard wood is straight grain American Walnut and pistol grip. Cal W., 32-40, 38-55, SS new york schuetzen rifle 2,945* STANDARD SCHUETZEN DESCRIPTION: 6 Color cased receiver group with brass New York Schuetzen butt plate. Straight grain American Walnut with pistol grip, schabel forearm with adjustable palm rest. Standard weight, full tapered, octagon barrel in 24, 26, 28, and 30 lengths. Rifle shown with fancy checkered wood, 30 part octagon barrel, French grey receiver with deluxe mid range tang sight and globe with apps and spirit level front.

7 hepburn barreled actions + 25 SHIPPING & INSURANCE 1,025 WITH SINGLE SET TRIGGER + 25 SHIPPING & INSURANCE Highwall Lowwall 1, ,250 1,550 1,195 1,370 WITH SINGLE SET TRIGGER + 25 SHIPPING & INSURANCE + 25 SHIPPING & INSURANCE + 25 SHIPPING & INSURANCE Model 1874 Sharps available in either Pistol Grip or Straight Grip/Double- Set Triggers please specify. Receiver is supplied polished, assembled, in the white. Also available with single trigger and small lever. The 1874 receiver frames and all internal parts are machined from solid steel, plate, bars and rod, in accordance with original dimensions and modern machining practices. Receiver frame is heat-treated 8620 steel and intended for use with original rimmed cartridges. Model 1875 Sharps available in either Pistol Grip or Straight Grip/Single Trigger please specify. Receiver is supplied polished, assembled, in the white. The 1875 receiver frame is 8620 steel investment cast by Ruger, Pine Tree Casting, Top Quality. All internal parts are machined from solid steel and heat treated. The 1875 is intended for use with original rimmed cartridges. Model 1885 Highwall or Lowwall available in either Pistol Grip or Straight Grip/Single Trigger please specify. Receiver is supplied polished, assembled, in the white. The 1885 receiver frames and all internal parts are machined from solid steel, plate, bars and rod, in accordance with original dimensions and modern machining practices. Receiver frame is heat-treated 8620 steel and intended for use with original rimmed cartridges. Model 1877 Sharps available with single trigger in either straight grip or pistol grip-please specify. Receiver is supplied polished, assembled and in the white. The 1877 receiver frames and internal parts are machined from solid steel, plate, bars and rod, in accordance with original dimensions and modern machining practices. Receiver frame is heat-treated 8620 steel and intended for use with original rimmed cartridges. Model 1879 Remington Hepburn available in pistol grip with double set triggers only. Receiver is supplied polished, assembled and in the white. The 1879 receiver frames and all internal parts are machined from solid steel, plate, bars and rod, in accordance with original dimensions and modern machining practices. Receiver frame is heat-treated 8620 steel and intended for use with original rimmed cartridges. Barreled actions are also available. Barrels are available in calibers 17 thru 50; in 26" to 34" lengths; in Octagon, Part Octagon and Round shapes; and in both Standard Weight or the No. 1 7 Heavy Barrel models.

8 THE BOSS GUN Custom New Model 1874 Standard BOSS GUN The above rifle features Grade I Engraving, XXX Fancy Walnut, 34 No. 1 Heavy Tapered Octagon Barrel, Deluxe Long-Range Tang Sight, Buckhorn Rear Barrel Sight, Globe with Post Front Sight and Hartford Nose Cap. 4,995* BOSS GUN FEATURES: Smooth Steel Shotgun Butt, Straight Grip, Cheek Rest with Accent Line, Hartford Forend, 34 No. 1 Heavy Tapered Octagon Barrel, Deluxe Long Range Tang Sight, Buckhorn and Globe w/post Barrel Sights. BARRELS: For the BOSS GUN the No. 1 Heavy Tapered Octagon is standard. However, the standard weight barrel is available at no extra cost. Approximate weights Standard Barrelled Rifles: 30 at 93 4 lbs., 32 at101 4 lbs, 34 at lbs.; No. 1 Heavy with Hartford Collar: 30 at 12 lbs., 32 at lbs., 34 at lbs. Full Tapered Octagon is standard. Optional Part Octagon to Round Tapered Barrel is available at 75 extra. (Half Octagon is approximately 11 Octagon and the balance Tapered Round.) SIGHTS: Globe with Post in front and Rocky Mountain Buckhorn Rear Barrel Sights, Deluxe Long Range Tang Sight with Windage Adjustment. Other sights available at additional cost. Grade II: Buttplate Engraving Detail RECEIVER: With Double Set Triggers and Straight Grip. Pistol Grip configurations are available if desired. HAND ENGRAVING: Grade I: Right Side with S-Banner with BOSS GUN on raised receiver flat; Left Side with Oval for customer initials (maximum of three [3] initials), plus Accent Engraving on lockplate and receiver. Grade II: Same as Grade I except for additional engraving on all receiver group parts at 325 extra. Grade III: at 795 extra. METAL FINISH: Receiver group and Butt Plate are French Grey standard, Color Case Hardened Receiver and Butt Plate also available on request; Barrel and Sights hand-polished, high lustre blued. WOOD: American Walnut XXX Fancy standard. Presentation grade available at 300 extra. BUTTSTOCK: Hartford Style Heavy Butt, Straight Grip, Cheek Rest with Accent Line (for right handed shooter); available without cheek rest on request. Custom Shop Detail Fit and Finish. Wood is Hand Rubbed to a Satin Finish. CHECKERING: Full Pattern available at 350 extra. FOREND: Hartford Style with Cast German Silver Nose Cap. 8 * Note: Federal Excise Tax, State and Local Taxes and Shipping not included in above prices.

9 heavy hartfod long range sporting & target rifle 7,950* RIFLE DESCRIPTION: This C. Sharps Arms Custom 1874 Sharps with double set triggers features a presentation grade of walnut with pistol grip, smooth scalloped bottom with ebony inlay, full pattern hand checkering, forend ebony nose cap. The barrel is a 34 No. 1 heavy part-octagon with a Hartford collar at receiver, fitted with a C. Sharps windgauge front globe sight w/spirit level and interchangeable apertures. The tang sight is a C. Sharps Deluxe Long Range with vernier scale and windage adjustment on the staff. (Sights manufactured by C. Sharps Arms) Finish: The action group and buttplate w/grade IV engraving are carbonized and then stripped to French grey. The wood is a full fill satin finish. Rifle weight as described is approximately 12.5 lbs. Net Rifle Cost Grade II: Buttplate Engraving Detail Western Artist ralph heinz prints Historically Accurate Last Of Their Kind The Scout & Tenderfoot The Hide Hunter Each detailed and historically accurate print measures 16 x 20. Each print is 15. Please add 7 postage. 9

10 custom 1877 sharps target rifle 2,590* RIFLE DESCRIPTION: Available with 30 tapered octagon barrel, single trigger, drilled and tapped for optional 1877 tang sights. Straight grain American walnut pistol grip buttstock with black checkered buttplate and for-end with schnabel tip. Case colored deceiver group and blued barrel. Rifle shown with checkered presentation wood with ebony nose cap, french grey receiver group, heavy round barrel with Rigby flat and long range sights. j.p. lower style 1877 rifle 2,440* RIFLE DESCRIPTION: Available with 26, 28 or 30 tapered octagon barrel, single trigger, drilled and tapped for optional tang sights. Straight grain American walnut straight grip buttstock with checkered steel buttplate and forend with lower style schnabel tip. Color cased receiver group and blued barrel. Rifle shown with extra fancy checkered walnut stock, blade and buckhorn sights and hook & eye sling swivels. I picked up my rifle today at the local post office, and I am very impressed. What a beautiful gun. I can hardly wait to get it to the range and try it out. The wood to metal fit and action are flawless. Thanks guys at C. Sharps for making Christmas in July. - Ketil Nilsen, Norway 10 * Note: Federal Excise Tax, State and Local Taxes and Shipping not included in above prices.

11 presentation grade model 1877 sharps cased long range rifle Price on request. Tang Engraving THE PRESENTATION CASED RIFLES, with reserved serial numbers to are Custom and individually built one at a time by master craftsmen and artists. They are in long-range calibers 44 & 45, with cases of 70 to 100 gr. (2 1/10 to 2 6/10 ). Barrels, 32 or 34, are cut-rifled & hand lapped tapered round with the traditional Rigby flat, machined as an integral part of the barrel, finished to a high grade satin finish, engraved & accented with gold inlay & wire, and fitted with the windguage globe w/ apertures & spirit level. RECEIVERS are machined from hot-rolled 8620 steel and are thoroughly inspected and heat-treated. After carborizing, they are stepped back to a French Grey to accent the engraving. Note: our Presentation Engraved & inlaid with gold wire, as shown; initials or monograms may be added. The model 1877 is fitted with the traditional single trigger and long-range vernier tang sight. OUR WALNUT STOCKS are Presentation grade black and English (also called French) walnut, air-dried, with a full fill satin finish. The Presentation case of the finest quality oak and leather is in itself a classic, fitted to each rifle; also included are 2 custom turnscrews, one cleaning rod, one dust mop & oil bottle. The brass fittings include an engraved brass plate for personalizing with initials or monogram, as well as serial number. Please contact us for additional information. Price on request. Right Side Left Side Top View Bottom View 11

12 1879 hepburn midrange target & sporting rifle 3,100* RIFLE DESCRIPTION: 30 tapered octagon standard weight barrel, pistol grip, schnabel forend, accent panels at receiver, double set triggers, color-cased receiver and smooth or checkered steel butt plate. Rifle shown with semi-fancy wood, soule mid range tang sight and globe with apps and spirit level front sight forearm with ebony nose cap. the 1885 highwall custom engraved rifles This C. Sharps Arms Custom Engraved Grade III Classic 1885 Sporting rifle w/ single set trigger features a 28 standard weight tapered part octagon barrel (No. 3 Winchester), C.S.A. sights. 6,250* Net Rifle Cost RIFLE DESCRIPTION: Custom Grade 1885 Highwalls are available in both the classic or sporting rifle styles. Custom target rifles are produced with the sporting rifle variations of barrel length & sight combinations to suit the particular style or range of target shooting to be done. BARRELS: The standard weight barrel is the same as the original No. 3 Highwall barrel, up to 30 long. Our No. 1 heavy is the same as the original No. 4 Highwall barrel up to 34 long. Both are available in part octagon. Bottom View SIGHTS: All sights are optional; refer to sight page. RECEIVERS: The standard receiver is the thick wall with octagon crown. The thick wall with round crown is available on request on custom rifles. WOOD: XXX Fancy American walnut, crescent butt plate, pistol grip with ebony inlay, cheek rest with accent line, forend w/ ebony inlay and hand-checkered. HAND-ENGRAVED GRADE III is a traditional Highwall pattern (other game animals could replace the bear) as shown. This pattern would include 3 initials on the lever for a personal touch: will also include some accent engraving on the crescent butt plate. FINISH: Full fill satin finish on the stocks. Barrels are hand polished to a satin finish. Action group and butt plate are French grey Grade II Engraving Right Side 1885 Grade II Engraving Left Side 1885 Grade III Engraving Right Side 1885 Grade III Engraving Left Side

13 Grade I: Right side engraving detail Grade I: Left side engraving detail Grade II: Right side engraving detail Grade II: Left side engraving detail Grade III: Right side engraving detail Grade III: Left side engraving detail Grade III: Top view engraving detail Grade III: Bottom view engraving detail Grade IV: Right side engraving detail Grade IV: Left side engraving detail Grade IV: Top view engraving detail Grade IV: Bottom view engraving detail

14 soule style tang sights & hadley style adjustable eyecup Soule Style Mid- Range Vernier Tang Sight (shown with Sharps base) SOULE STYLE MID- RANGE VERNIER TANG SIGHT M.O.A. Windage left & right of center, elevation to approx. 800 meters. Deluxe eyecup 11/8 diameter with.040 hole. SOULE STYLE LONG- RANGE VERNIER TANG SIGHT 440 Soule Style Long-Range Vernier Tang Sight (shown with Winchester base) Hadley Style Adjustable EyeCup Soule Sight is available for 1874 & 1875 Sharps, 1879 Hepburn and also the 1885 Highwall (Please specify). Add 45 if you want the Hadley Adjustable Eye Cup installed instead of the fixed eyecup. 24 M.O.A. Windage left & right of center, elevation to approx meters. Deluxe eyecup 11/8 diameter with.040 hole. HADLEY STYLE ADJUSTABLE EYE CUP 60 Aperture Holes from.03 to.078, 11/4 diameter thread size In many areas, gun purchases for sure, value received is at least partly percieved. That begs the question: Did I get 5,000 worth of rifle for my 5,000? Absolutely, and when I m able I ll order another. I think that I spoke with at least 3 different persons at times I called your company and to the last, everyone was more than courteous and they cared. Couple that with a faultless product and everyone wins. I hope that you feel the same. It must be a good feeling to know that your rifles are in a league of their own. Thank you to all of your team. - Dr. Mark Poston 14 * Note: Federal Excise Tax, State and Local Taxes and Shipping not included in above prices.

15 SHARPS TANG SIGHTS: MODEL 1 For Sharps with traditional center-to-center mounting screws. Item# Description Retail (10-006) Standard Mid Range Tang with Windage (10-008) Deluxe Mid Range Tang with Windage (10-036) Soule Mid Range (10-012) Standard Long Range Tang with Windage (10-014) Deluxe Long Range Tang with Windage (10-038) Soule Long Range (10-020) Marbles Tang Sight (10-018) Sporting Buckhorn Rear Barrel Sight...95 WINCHESTER TANG SIGHTS: MODEL 2 For High Walls with center-to-center mounting screws. Item# Description Retail (10-007) Standard Mid Range Tang with Windage (10-009) Deluxe Mid Range Tang with Windage (10-037) Soule Mid Range (10-013) Standard Long Range Tang with Windage (10-015) Deluxe Long Range Tang with Windage (10-039) Soule Long Range (10-021) Marbles Tang Sight (10-019) Sporting Buckhorn Rear Barrel Sight (NEW) (For all rifles with 3/8 Dovetail...95 FRONT SIGHTS Item# Description Retail (10-023) Blade Front, 7/ (10-024) Blade Front, 3/ (10-001) Globe w/.025 Post, 7/16 # ( ) Globe w/.050 Post, 7/16 # ( ) Globe w/.025 Post, 3/8 # ( ) Globe w/.050 Post, 3/8 # (10-002) Globe w/post & Ball, 7/16 # ( ) Globe w/post & Ball, 3/8 # (10-003) Globe w/apertures, 7/16 # ( ) Globe w/apertures, 3/8 # (10-004) Globe w/apertures & Spirit Level, 7/ ( ) Globe w/apertures & Spirit Level, 3/ (10-005) Windgauge w/apertures & Spirit Level, 7/ (10-003a) Aperture Set (each) ( S) Spirit Level (each) EYECUPS & CONVERSION UNITS Item# Description Retail (10-028) Standard Eyecup, 7/8 B (.046) (10-029) Standard Eyecup, 7/8 C (.052) (10-030) Standard Eyecup, 7/8 D (.063) (10-032) Deluxe Eyecup, 1-1/8 B (.046) (10-033) Deluxe Eyecup, 1-1/8 C (.052) (10-034) Deluxe Eyecup, 1-1/8 D (.063) (10-035) Hadley Adjustable Eyecup 1-1/ ( ) Knurled Takedown Pivot Screw ( C) Deluxe (conversion) Elevator & Windage Assembly (w/knurled Takedown Screw)

16 classic sights for sharps, hepburn & winchesters Soule Style Tang Sights Long & Mid Range Tang Sights Standard & Deluxe Mid & Long Range (Windage Adjustable) Item # Item # Item # Item # Item # Item # Item # Mid Range model 24 M.O.A. Windage left & right of center, elevation to approx. 800 meters. Deluxe eyecup 11/8 diameter with.040 hole. Long Range model 24 M.O.A. Windage left & right of center, elevation to approx meters. Deluxe eyecup 11/8 diameter with.040 hole. Standard Mid & Long Range models feature windage with calibrated slide bar (7/8 eyecup locks windage travel), elevation lock nut on elevator screw. Deluxe Mid & Long Range models are screw adjustable for windage with calibration on top of the elevator body, elevation lock screw on left side, a large 1-1/8 eyecup (gives positive locked windage), and a knurled take-down screw for easy installation or removal of sight staff. Mid Range elevation to approximately 700 yds.; Long Range 1200 yds. NOTE: Soule Sight is available for 1874 & 1875 Sharps and also the 1885 Highwall (please specify). Add if you want the Hadley Adjustable EyeCup installed instead of the fixed eyecup. HADLEY STYLE ADJUSTABLE EYECUP Item # With 8 Aperture Holes from.03 to.078, 11/4 diameter thread size APERTURE SIGHTS (Aperture Set Included) APERTURE SET Sporting Buckhorn Rear Barrel Sight Item # (2-1/10 Long) SHARPS SIGHTS DELUXE ELEVATOR WINDAGE ASSEMBLY Item # C (Conversion) Front Blade Sight Item # or Item # SPIRIT LEVEL Item # GLOBE FRONT SIGHTS W/POST 16 Item # Item # Item # Item # a Post Only # or # (.025 ) Post Only # or # (.050 ) Post & Ball # or # Available in 7/16 #1 or 3/8 #2 models.

17 optional features available BARRELS (ALL MODELS) PART OCT No. 1 Heavy 70 No. 1½ Heavy 140 No. 1¾ Heavy 210 No. 2 Heavy 280 No. 3 Heavy 350 Not available on 1875 Hartford Collar on No. 1, 1½, 1¾ Heavy No. 1 No. 2 No Special Order - No Extra Cost Special Order - No Extra Cost Standard on Rifle No No. 5½ 140 Build your own custom rifle at csharpsarms.com WOOD UPGRADES SF 100 F 200 XF 350 XXF 525 XXXF 600 Presentation & Exhibition POR Checkering 350 Satin Finish 200 ADDITIONAL UPGRADES New Freund 40 Style Saddle Ring Hook and Eye 75 Sling Swivels Longer or Shorter Than Standard 75 Length of Pull Drill and Tap for Customers Scope 75 Blocks Re-Barrel (Plus 250 Cost of Barrel) Ebony Pistol Grip 200 Inlay with Scallop Available on 1877 Target & 1874 Hartford Long Range Accent Panels on 200 Forend Available on 1874 & 1877 models only Rigby Flat 300 ADDITIONAL UPGRADES Pistol Grip 80 Not available on 1874 Hartford Sporting & Classic Rifles Cheek Rest 55 Not available on 1874 Hartford Sporting, 1875 & 1877 Target Rifles Heavy Hartford 85 Buttstock Heavy Hartford 185 LR Pistol Grip Heavy Hartford LR Pistol Grip w/ 235 Accent Line Hartford Nose Cap 170 Ebony Nose Cap 170 Ebony Inlays, each (1885 Model) Silver Inlays, each (1885 Model) French Grey 155 Satin Polish Barrel 250 High Polish Barrel Single Set Trigger 1875 Single Set Trigger 1875 Single Set Trigger Retro-Fit

18 rifle & cartridge availability table 1. Check all item entries over carefully before placing your order. 2. When you receive confirmation on your rifle order, please check all item entries over carefully. If there is an error, please call us immediately error will be corrected at no charge. Your first change after that will also be done at NO CHARGE. All changes done to your invoice after this will have a 50 CHARGE PER INVOICE. 3. A Deposit of is required on all rifle orders, except for 50% on custom orders. *NOTE: RIFLE BARRELS ARE IN LIMITED SUPPLY. *NOTE: FEDERAL EXCISE TAX, STATE AND LOCAL TAXES AND SHIPPING NOT INCLUDED IN RIFLE PRICES. Prices are subject to change unless payment in full is received at time of order. A deposit does not secure the current price as shown on the date your order is placed. ALL state, local and federal taxes are the responsibility of the purchaser at the time of delivery. Purchasing contracts may be canceled without penalty at any time by either party prior to sellers notification to customer of completion of ordered product: NOTICE OF RIFLE COMPLETION. (Item prices shown are subject to change without notice). Cartridge 1874 HARTFORD 1874 BRIDGEPORT 1875 CARBINE 1875 SPORT 1875 CLASSIC HEPBURN 1885 HIGHWALL 1885 LOWALL 22 LR NO NO NO YES YES NO YES YES 22 Win. Mag. NO NO NO YES YES NO YES YES 22 Hornet NO NO NO YES YES NO YES YES 22 Bee NO NO NO YES YES NO YES YES 219 Zipper NO NO NO YES YES NO YES YES NO NO NO YES YES NO YES YES 25-35, 225W NO NO NO YES YES NO YES NO 30-40K NO NO YES YES YES NO YES NO NO NO YES YES YES NO YES NO Win. YES YES YES YES YES YES YES NO WCF NO NO YES YES YES NO YES YES Win. YES YES YES YES YES YES YES NO 375 Win. NO NO YES YES YES NO YES NO 405 Win. YES YES YES YES YES NO YES NO 18

19 rifle & cartridge availability table Cartridge 1874 HARTFORD 1874 BRIDGEPORT 1875 CARBINE 1875 SPORT 1875 CLASSIC HEPBURN 1885 HIGHWALL 1885 LOWALL BN YES YES YES YES YES YES YES YES SS YES YES YES YES YES YES YES YES Target YES YES YES YES YES YES YES NO / 10 BN YES YES YES YES YES YES YES NO / 4 BN YES YES YES YES YES YES YES NO / 2 SS YES YES YES YES YES YES YES NO / 8 BN YES YES NO YES YES YES YES NO / 4 BS YES YES NO YES YES YES YES NO 444 Marlin NO NO YES YES YES NO YES NO / 4 BN YES YES YES YES YES YES YES NO / 8 BN YES YES NO YES YES YES YES NO / 10 Rem. YES YES YES YES YES YES YES NO / 10 Rem. YES YES NO YES YES YES YES NO / 10 Rem. YES YES NO YES YES YES YES NO WCF, 45 COLT YES YES YES YES YES NO YES YES / 10 SS YES YES YES YES YES YES YES NO / 10 SS YES YES YES YES YES YES YES NO / 10 SS YES YES NO YES YES YES YES NO / 8 SS YES YES NO YES YES YES YES NO / 4 SS YES YES NO YES YES YES YES NO GOV.T YES YES YES YES YES YES NO NO / 2 SS YES* YES* YES* YES* YES YES NO NO / 4 SS YES* YES* YES* YES* YES YES NO NO * = Standard Chambering but No. 1 Heavy Barrel Required 19

20 The American Sharps Shooter To subscribe to our free quarterly online magazine, The American Sharps Shooter, Print is available on pg For additional information or to place an order info@csharpsarms.com csharpsarms.com p: (406) f: (406)

PRICE LIST. Finland. Delivery program No. 70 Valid from

PRICE LIST. Finland. Delivery program No. 70 Valid from PRICE LIST Finland Delivery program No. 70 Valid from 30.10.2014 PLEASE NOTE Customer price list for new guns and accessories. Prices are in Euro including 24 % VAT. Delivery program No. 70 Valid from

More information

SPECIFICATIONS. The WM-6XL Long Wm. Malcolm Telescopic Riflescope Instruction Manual WARNING:

SPECIFICATIONS. The WM-6XL Long Wm. Malcolm Telescopic Riflescope Instruction Manual WARNING: The WM-6XL Long Wm. Malcolm Telescopic Riflescope Instruction Manual SPECIFICATIONS Power: 6X Objective: 17mm Length: 30 in. Weight: 1.85 lb. (29.60 oz.) Eye relief: approx. 4.5 in. Reticle: Fine Crosshair

More information

AXIOM Rifle Stock. Owner s Manual. Installation Instructions

AXIOM Rifle Stock. Owner s Manual. Installation Instructions AXIOM Rifle Stock Owner s Manual Page 1 Installation Instructions ATTENTION: Read and follow all instructions and warnings prior to installation and/or firing a Axiom equipped firearm. Take extra time

More information

Photo by Mark Buchanan, Big Bore Productions PRECISION RIFLE ACTIONS AND COMPONENTS

Photo by Mark Buchanan, Big Bore Productions PRECISION RIFLE ACTIONS AND COMPONENTS Photo by Mark Buchanan, Big Bore Productions PRECISION RIFLE ACTIONS AND COMPONENTS Modern M98 Actions Made with Certified Alloy Steel Billets CNC Machined Hand Finished Case Hardened Hand Lapped Hand

More information

WESTERN PISTOL.22 CALIBER SINGLE SHOT. Entire pamphlet Copyrighted by JACO Designs 1972

WESTERN PISTOL.22 CALIBER SINGLE SHOT. Entire pamphlet Copyrighted by JACO Designs 1972 WESTERN PISTOL.22 CALIBER SINGLE SHOT Entire pamphlet Copyrighted by JACO Designs 1972 This pamphlet contains the plans and instructions necessary to construct the Western pistol. This pistol breaks open

More information

** Any pricing you are curious about but don't see, please contact us for specifics.**

** Any pricing you are curious about but don't see, please contact us for specifics.** Pricing Service Pricing/Labor Rates: Download our complete Price Guide. ** Any pricing you are curious about but don't see, please contact us for specifics.** ** Custom package prices are a guideline,

More information

Ghost In The Ring Ghost Night Book 1

Ghost In The Ring Ghost Night Book 1 We have made it easy for you to find a PDF Ebooks without any digging. And by having access to our ebooks online or by storing it on your computer, you have convenient answers with ghost in the ring ghost

More information

2014 Lancer Systems all rights reserved

2014 Lancer Systems all rights reserved 2014 Lancer Systems all rights reserved PROPRIETARY NOTICE: This contains Lancer Systems confidential, proprietary and/or competition sensitive data. ITAR NOTICE: Warning This document contains technical

More information

Gun Parts Catalog. This sneak preview of your study material has been prepared in advance of the book's actual online release.

Gun Parts Catalog. This sneak preview of your study material has been prepared in advance of the book's actual online release. Gun Parts Catalog This sneak preview of your study material has been prepared in advance of the book's actual online release. 1 Gun Parts Catalog INTRODUCTION Some gunsmiths say that reblueing a firearm

More information

ORIGINAL AMERICAN 180 PARTS and SERVICE

ORIGINAL AMERICAN 180 PARTS and SERVICE AMERICAN SAR 180/275 E & L Manufacturing is the SOLE SOURCE and MANUFACTURER for new AMERICAN SAR 180 Rifles, Parts and ACCESSORIES Semi-Automatic American 180/275 $1,250.00 TRANSPARENT DRUMS - FIT ALL

More information

USER MANUAL MUZZLE CROWN. CONTACT: Dave Manson Precision Reamers Phone: Fax:

USER MANUAL MUZZLE CROWN. CONTACT: Dave Manson Precision Reamers Phone: Fax: USER MANUAL MUZZLE CROWN REFACING TOOLKIT CONTACT: Dave Manson Precision Reamers Phone: 810-953-0732 Fax: 810-953-0735 E-mail: david@mansonreamers.com Patent Number: US 6,758,005 B2 INTRODUCTION Muzzle

More information

272 - CASED PAIR OF JOSEPH MANTON HALF STOCKED PERCUSSION DUELLING PISTOLS:

272 - CASED PAIR OF JOSEPH MANTON HALF STOCKED PERCUSSION DUELLING PISTOLS: Lot 272 - CASED PAIR OF JOSEPH MANTON HALF STOCKED PERCUSSION DUELLING PISTOLS: 30 bores; 10 oct barrels; g. bores; std sights; borderline & foliate engraved locks inscribed JOSEPH MANTON LONDON; fitted

More information

Practical Scrap Metal Small Arms Vol.10 By Professor Parabellum

Practical Scrap Metal Small Arms Vol.10 By Professor Parabellum Practical Scrap Metal Small Arms Vol.10 By Professor Parabellum Introduction The 9mm submachine gun design described here is extremely basic and can be put together using very limited tools and materials.

More information

M14 MODULAR CHASSIS SYSTEM (MOD 1) INSTRUCTION MANUAL. West Springfield, MA Phone: (866) FAX: (413)

M14 MODULAR CHASSIS SYSTEM (MOD 1) INSTRUCTION MANUAL.   West Springfield, MA Phone: (866) FAX: (413) M14 MODULAR CHASSIS SYSTEM (MOD 1) INSTRUCTION MANUAL Troy Industries, Inc. WWW.TROYIND.COM West Springfield, MA 01089 Phone: (866) 788-6412 FAX: (413) 383-0339 Thank You M14/M1A MODULAR CHASSIS SYSTEM

More information

M14 MODULAR CHASSIS SYSTEM (MOD 1) INSTRUCTION MANUAL. West Springfield, MA Phone: (866) FAX: (413)

M14 MODULAR CHASSIS SYSTEM (MOD 1) INSTRUCTION MANUAL.  West Springfield, MA Phone: (866) FAX: (413) M14 MODULAR CHASSIS SYSTEM (MOD 1) INSTRUCTION MANUAL Troy Industries, Inc. WWW.TROYIND.COM West Springfield, MA 01089 Phone: (866) 788-6412 FAX: (413) 383-0339 Thank You M14/M1A MODULAR CHASSIS SYSTEM

More information

METRIC / IMPERIAL MINI-MAG LEVEL

METRIC / IMPERIAL MINI-MAG LEVEL Digital Mini-Mag Level 570 Series Measuring range 360 (4 x 90 ) Embedded magnets on three sides Resolution 0.05 Accuracy +/- 0.2 Standard 9V battery Dimensions: L60mm x H60mm x W35mm METRIC / IMPERIAL

More information

MACHINE TOOL ACCESSORIES

MACHINE TOOL ACCESSORIES VERTICAL 5-C COLLET VISE SERIES 344: VERTICAL 3-C COLLET VISE SERIES 344: : 2-1/2 x 7-3/4 Height: 4 Small movement of lever opens or closes collet. 2030000 CAM OPERATED 5-C HORIZONTAL/VERTICAL COLLET FIXTURE

More information

AR-15 Armorer s Essentials Kit. Product # Instructions # Revision: B

AR-15 Armorer s Essentials Kit. Product # Instructions # Revision: B AR-15 Armorer s Essentials Kit Product #156111 Instructions #1025769 Revision: B 1 INDEX 3 AR-15 Adjustable Receiver Link 3 Pivot Pin and Roll Pin Installation Tool 4 Mag well Vise Block 7 Upper Vise Block

More information

Starrett Year End Sale! Electronic Caliper 799A Series. Best Buys on Starrett Products

Starrett Year End Sale! Electronic Caliper 799A Series. Best Buys on Starrett Products JW DONCHIN CO. Starrett Year End Sale! Electronic Caliper 799A Series No. 799A 6/150 List Price $125.00 SALE PRICE $100.00 Best Buys on Starrett Products Electronic Caliper - No. 799A Series Electronic

More information

Arisaka Type 38 Rifle Disassembly and Reassembly

Arisaka Type 38 Rifle Disassembly and Reassembly Page 1 of 27 Arisaka Type 38 Rifle Disassembly and Reassembly Disassembly Instructions 1) Open the bolt as show in figure 1. Page 2 of 27 2) Open the bolt release. 3) Remove the bolt. 4) Remove the bolt/receiver

More information

WHO WE ARE. Established in 1967, we continue to deliver excellence across all our markets and are committed to ongoing investment in Australia.

WHO WE ARE. Established in 1967, we continue to deliver excellence across all our markets and are committed to ongoing investment in Australia. PRODUCT CATALOGUE WHO WE ARE Winchester Australia Limited is an independently-managed Australian entity. In addition to being a manufacturer of ammunition, we are also a wholesale distributor of ammunition,

More information

Maintenance & Parts list for:

Maintenance & Parts list for: Maintenance & Parts list for: Industrial gun GB 2 Juni 2017 This Maintenance & Parts list for industrial gun is prepared by : Winchester Europe Service V. Parbst & Søn as a comprehensive maintenance guide

More information

The Box Tube MAC-11 The Ultimate DIY Machine Pistol Practical Scrap Metal Small Arms Vol.II By Professor Parabellum Plans on pages 15 to 20

The Box Tube MAC-11 The Ultimate DIY Machine Pistol Practical Scrap Metal Small Arms Vol.II By Professor Parabellum Plans on pages 15 to 20 The Box Tube MAC-11 The Ultimate DIY Machine Pistol Practical Scrap Metal Small Arms Vol.II By Professor Parabellum Plans on pages 15 to 20 Introduction The machine pistol described here is perhaps the

More information

Nick Harvey Reviews The Aussie-made Lithgow Crossover LA101 Rimfire

Nick Harvey Reviews The Aussie-made Lithgow Crossover LA101 Rimfire http://www.sportingshootermag.com.au/news/nick-harvey-reviews-the-aussie-made-lithgow-crossover-la101-rimfire Nick Harvey Reviews The Aussie-made Lithgow Crossover LA101 Rimfire By Nick Harvey 12 November

More information

MINI-LATHE QUICK CHANGE TOOL POST

MINI-LATHE QUICK CHANGE TOOL POST MINI-LATHE QUICK CHANGE TOOL POST Cutting and assembly details Machinists should familiarize themselves with the contents of this section before jumping in to the drawings. Many details are described here

More information

B B B

B B B Winchester SXP Gauge Tactlite Six Position Adjustable Shotgun Stock with Scorpion Recoil System B..0.00 B..0.00 B..0.00 Removable/Adjustable Tactical Cheekrests X Scorpion Recoil Pad Dual Sided QD Attachment

More information

Marble Arms Front Sight Part Numbers Gun Sight Specifications Installation & Maintenance Instructions

Marble Arms Front Sight Part Numbers Gun Sight Specifications Installation & Maintenance Instructions Marble Arms Front Sight Part Numbers Gun Sight Specifications Installation & Maintenance Instructions Marble Arms Front Sight Chart Sight Height Sight Width Description Color 1/16 Bead Mfg# 3/32 Bead Mfg#.260.340

More information

Mounting Brackets for 8450 Drawer Slides KV Front Bracket 20 $1.30 KV P Rear Bracket 20 $5.20

Mounting Brackets for 8450 Drawer Slides KV Front Bracket 20 $1.30 KV P Rear Bracket 20 $5.20 Mounts bottom or side 1/2 clearance plus 1/32 0 lb. load with model Almond finish Integrated soft-close mechanism 32mm hole pattern with direct access mounting Lever disconnect for easy drawer removal

More information

THE KENTUCKY RIFLE. by Dr. Harmon C. Leonard

THE KENTUCKY RIFLE. by Dr. Harmon C. Leonard THE KENTUCKY RIFLE by Dr. Harmon C. Leonard The Kenturky Rifle should probably be more appropriately named the First American Rifle, since it was not always rifled and rarely produced or used in Kentucky.

More information

FOR BIS USE ONLY Doc. No. PG 28(1144) August 2008

FOR BIS USE ONLY Doc. No. PG 28(1144) August 2008 FOR BIS USE ONLY Doc. No. PG 28(1144) August 2008 PRELIMINARY DRAFT AMENDMENT NO.2 AUGUST 2008 TO IS 13136 : 1991 ARMS AND AMMUNITION RIFLE AIR RIFLE SPRING OPERATED SPECIFICATION [ Pag12,Annex A ] Substitute

More information

GRAND PIANO HARDWARE AND ACCESSORIES

GRAND PIANO HARDWARE AND ACCESSORIES GRAND PIANO HARDWARE AND ACCESSORIES LID SUPPORT CUP No. 938 - Solid brass. Each No. 938N - Nickel plated. Each GRAND RAIL PROP NUTS Slotted grand rail prop nuts for replacement. Solid Brass. No. 925 -

More information

Photographs A-1 through A-5: Plain/Common Rifle, Deep River, Guilford County, North Carolina. Maple Stock,.44 caliber.

Photographs A-1 through A-5: Plain/Common Rifle, Deep River, Guilford County, North Carolina. Maple Stock,.44 caliber. Photographs A-1 through A-5: Plain/Common Rifle, Deep River, Guilford County, North Carolina. Maple Stock,.44 caliber. Reprinted from the American Society of Arms Collectors Bulletin 73:26-31 Additional

More information

PM-01 Bolter 9mm Luger Carbine

PM-01 Bolter 9mm Luger Carbine PM-01 Bolter 9mm Luger Carbine Disgned by Petr Malik For Educational Purposes Only! I m not responsible, in any shape or form, for the acts of others. For those who do not know, the PM-01 (Petr Malik-gun

More information

CONTENTS. 12 Instinct L 14 Instinct Sporting AL 18 Fenice 20 Franchi Gear 22 Parts and Accessories 23 Price List

CONTENTS. 12 Instinct L 14 Instinct Sporting AL 18 Fenice 20 Franchi Gear 22 Parts and Accessories 23 Price List CONTENTS 2 Franchi History 3 Franchi Technology 4 Intensity 6 Affinity 7 Affinity Compact 8 Affinity Sporting 10 Instinct SL 12 Instinct L 14 Instinct Sporting 16 48 AL 18 Fenice 20 Franchi Gear 22 Parts

More information

STEEL RULE. Stock TRY SQUARE

STEEL RULE. Stock TRY SQUARE FITTING INTRODUCTION Fitting consists of a handwork involved in fitting together components usually performed at a bench equipped with a vice and hand tools. The matting components have a close relation

More information

FITTING INTRODUCTION:

FITTING INTRODUCTION: FITTING INTRODUCTION: Machine tools are capable of producing work at a faster rate, but there are occasions when components are processed at the bench. Sometimes it becomes necessary to replace or repair

More information

Assembly, Use and Care Instructions

Assembly, Use and Care Instructions Assembly, Use and Care Instructions Product #336677 Instruction #1068318 Rev. F Thank you for purchasing a Caldwell Lead Sled DFT 2. The Lead Sled DFT 2 comes to you partially assembled. It will require

More information

interested in antique airguns several years ago. Hank is an expert on the history, design and

interested in antique airguns several years ago. Hank is an expert on the history, design and 1. Lukens Double Neck Hammer (DNH) rifle This rifle was made by clockmaker and gunsmith Isaiah Lukens of Philadelphia. Found in 1 the Virginia Military Institute Museum, it is a.32 caliber, muzzle loader

More information

Hello. & Welcome. tools to trust

Hello. & Welcome. tools to trust www.grozusa.com Whilst every effort has been made to ensure accuracy of information given in this catalogue at the time of going to print, Dec 2012, our policy of continyous improvement determines the

More information

HAND TOOLS. Carpenters Square. Basic Combination Set 520 Series

HAND TOOLS. Carpenters Square. Basic Combination Set 520 Series Carpenters Square Steel base and ergonomic design for ease of use Allows positive location and clamping Offers fixed angles: 45, 90 With mini carbide scriber and level vial Squareness within 0.2mm / 300mm

More information

QB78 CO 2 Pellet Rifle

QB78 CO 2 Pellet Rifle QB78 CO 2 Pellet Rifle Maintenance Instructions Text and photos by George Fox Lang The Chinese QB78 pellet rifle is one of the nicest and most popular CO 2 rifles ever produced. Here are the long-wanted

More information

and ps is ready to help!

and ps is ready to help! these m14 rifles have real stopping power. I m impressed. yeah, they re good all right, but I m not sure how we re supposed to take care of the m14. ah 1961, a good year for the m14. we don t have a tm,

More information

Portable Platform Scale

Portable Platform Scale Installation Manual Portable Platform Scale BPP1000 Series BPP2000 Series 1990-2015 by Fairbanks Scales, Inc. All rights reserved 50699 Revision 5 08/2015 Disclaimer Every effort has been made to provide

More information

LEG CURL IP-S1315 INSTALLATION INSTRUCTIONS

LEG CURL IP-S1315 INSTALLATION INSTRUCTIONS LEG CURL IP-S35 INSTALLATION INSTRUCTIONS Copyright 2009. Star Trac by Unisen, Inc. All rights reserved, including those to reproduce this book or parts thereof in any form without first obtaining written

More information

BUILDING A GHOST GLOCK. Prepper Mike

BUILDING A GHOST GLOCK. Prepper Mike BUILDING A GHOST GLOCK Prepper Mike WHAT IS A GHOST GLOCK? Ghost guns are guns that don t need to be registered Ghost guns are built by the owner based on not more than 80% complete lowers Ghost guns are

More information

Modular Gazebo Kit Series GardenHouse 12

Modular Gazebo Kit Series GardenHouse 12 Octagonal CUPOLA screened with louvers and light fixture Modular Gazebo Kit Series GardenHouse 12 with DOUBLE-TIERED Roof Lumber: Western Red CEDAR #1 (Cabinet) Shingles: 5X / 16" long / 1/2" thick or

More information

75 GUNS ESTATE AUCTION

75 GUNS ESTATE AUCTION 75 GUNS ESTATE AUCTION (No sales tax, buyer s fee, or FFL paperwork) 411 E Walnut, Salina, KS Sunday, April 28, 2019 at Noon Open for viewing at 11:00 am AUCTIONEER S NOTE: 2 owners, we will sell through

More information

Installation Instructions

Installation Instructions Supafold Slide Aside System Three Fold Room Divider Installation Instructions Distinctive Doors Ltd Supafold Slide Aside Internal Folding System IMPORTANT: Before proceeding with the installation, and

More information

LG400 Operating Instructions

LG400 Operating Instructions Preface: Dear Sports Marksman/Markswoman, Thank you for choosing one of our products. The new LG400 product series combines the latest innovations with time-tested technology. This is a sports rifle of

More information

HAND TOOLS. Moore & Wright Engineers Squares. For more information visit Features. WORKSHOP SQUARES: Grade B DIMENSIONS TABLE (MM)

HAND TOOLS. Moore & Wright Engineers Squares. For more information visit   Features. WORKSHOP SQUARES: Grade B DIMENSIONS TABLE (MM) Moore & Wright Engineers Squares Precision ground blade and stock Blind rivetted construction Hardened and tempered blades 3" & 4" available in Retail Packs 4006 WORKSHOP SQUARES: Grade B Blade Length

More information

Fastener Basics. Common Fastener Types. Fastener Materials. Grade / Class and Fastener Strength

Fastener Basics. Common Fastener Types. Fastener Materials. Grade / Class and Fastener Strength Fastener Basics Common Fastener Types Fastener Grade (US) or Class (metric) refers to the mechanical properties of the fastener material. Generally, a higher number indicates a stronger, more hardened

More information

1) Place the magazine cut-off in the center position between off and on (as shown in figure 1). 2) Remove the bolt.

1) Place the magazine cut-off in the center position between off and on (as shown in figure 1). 2) Remove the bolt. 1) Place the magazine cut-off in the center position between off and on (as shown in figure 1). 2) Remove the bolt. 3) Unscrew upper band screw. 4) Remove the upper band screw. 5) Loosen the stacking swivel

More information

REVERSE DRAW CROSSBOW ASSEMBLY MANUAL

REVERSE DRAW CROSSBOW ASSEMBLY MANUAL REVERSE DRAW CROSSBOW ASSEMBLY MANUAL FOR ALL REVERSE DRAW CROSSBOW MODELS MANUFACTURED BY TENPOINT CROSSBOW TECHNOLOGIES HORTON CROSSBOW INNOVATIONS WICKED RIDGE CROSSBOWS TO REDUCE YOUR RISK OF SERIOUS

More information

Remington 2014 Parts Price List

Remington 2014 Parts Price List Remington 204 Parts Price List )FFL 5)RARC )Factory Remington 204 Parts Price List F9745 V-3 AUTO SAFETY ACTUATING ROD F9735 V- AUTO SAFETY ACTUATOR F97822 V-2 AUTO SAFETY ACTUATOR PIN V- BARREL SELECTOR

More information

Bevel-Up Jack Rabbet Plane

Bevel-Up Jack Rabbet Plane Bevel-Up Jack Rabbet Plane U.S. Pat. Nos. 7,603,783 & 7,117,602 The Veritas Bevel-Up Jack Rabbet Plane is predominantly used for large-scale rabbets, as well as raised panel work anywhere you need to make

More information

Metrology (0) PROMO 13.1E. Resolution:.0005" (0.01mm).0005" (0.01mm) Grads

Metrology (0) PROMO 13.1E. Resolution:.0005 (0.01mm).0005 (0.01mm) Grads Metrology PROMO 13.1E Automatic off after 5 minutes with no loss of position Accuracy meets DIN862 Resolution:.0005" (0.01mm).0005" (0.01mm) Grads Call 00 44 (0)1835 863501 today IP67 Electronic Calipers

More information

A A A

A A A Hatsan Escort GA Akita Adjustable A..0.03 A..0.03 A..30.03 3 Four Position Adjustable Scorpion Recoil Pad Adjustable Soft Touch Padded Cheekrest 3 70.0795.0 Hatsan Escort GA Akita Adjustable [] M8 x.5

More information

GUNSMITHING. TEL NO: G UNSM I T H I N G

GUNSMITHING.   TEL NO: G UNSM I T H I N G GUNSMITHING WWW.INYATHI.NET TEL NO: 012 808 9911 info@inyathi.net G UNSM I T H I N G BERSERk The material is a 15% fiberglass reinforced Durethan. The composite stock will be made in one size, black colour

More information

Jewellery in a concrete look made out of FIMOair light

Jewellery in a concrete look made out of FIMOair light Jewellery in a concrete look made out of FIMOair light Urban lifestyle design Concrete is a highly popular material at the moment for furniture, home deco accessories and jewellery. Casting concrete yourself

More information

SOUTH BEND 10 HEAVY LATHE CROSS FEED SCREW REBUILD

SOUTH BEND 10 HEAVY LATHE CROSS FEED SCREW REBUILD The oldest piece of machinery that I have is a South Bend 10 inch heavy lathe. It has become somewhat of a project piece at times having come without a thread dial indicator and a rear cover for the cross

More information

Allen & Allen Company

Allen & Allen Company Sliding Door Hardware 71-222 Assembly Single Door Sets up to 100 lbs./door Adjustable, top mount, for door thickness 3/" and up. Included in 71-222 Hardware Set: 7001 Track, two No. 7000 carriers, two

More information

Bench Rest Reloading Dies

Bench Rest Reloading Dies Bench Rest Reloading Dies Individual Dies Bench Rest Reloading Die s Reloader Experience Level Full Length Sizes the case neck, shoulder and body, deprimes and expands the case neck. Used with any rifle

More information

How to Make a Hat Bending Jig

How to Make a Hat Bending Jig How to Make a Hat Bending Jig MATERIALS One 2" x 8" x 11" long (Base Block) exact measurements are 7 ½" x 1 ½" x 11" (Pine is OK to use, I have used scrap Walnut for my benders) Four pieces of Oak 1" x

More information

Legacy Upgraded Junior Gentlemen s Pen Kit

Legacy Upgraded Junior Gentlemen s Pen Kit Description: The Upgraded Junior Gentlemen s model is a classic style pen which is easy to turn and uses a Roller Ball Refill which is highly desirable among pen enthusiasts The Upgraded Junior Gentlemen

More information

ARIZ NA www.arizonamodels.com Lewis.30 cal MACHINE GUN KIT Assembly Directions- All Scales Reprinted with the permission of Air Age Publications Inc. Lewis Gun Arrangements use for option variations and

More information

MODEL T " HELICAL CUTTERHEAD INSTALLATION INSTRUCTIONS

MODEL T  HELICAL CUTTERHEAD INSTALLATION INSTRUCTIONS MODEL T27696 12" HELICAL CUTTERHEAD INSTALLATION INSTRUCTIONS For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Introduction The Model T27696 indexable

More information

Precision Universal Bevel Protractor, Set

Precision Universal Bevel Protractor, Set ß 37006 Protractors Measuring and laying-out tools, gauges 0 With 0-180 scale and locking screw. Standard steel, chrome-plated, scale dazzle-free and with matt-chromed finish. 37006 Arc Length of 37006...

More information

Workshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP

Workshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP Workshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP Workshop Workshop Index 282 Adjustable Reamers 287 Air Tools Die Grinder Kit 286 Carbide Burs Double Cut 285 Countersinks 292

More information

INSTRUCTIONS FOR REFINISHING A UBERTI STOCK.

INSTRUCTIONS FOR REFINISHING A UBERTI STOCK. INSTRUCTIONS FOR REFINISHING A UBERTI STOCK. I have been refinishing gunstocks for 30 years on and off. Over the past several years I have done quite a few Uberti rifles and handgun grips to get the red

More information

Miter Plane. U.S. Pat. Nos. 7,603,783 and 7,117,602

Miter Plane. U.S. Pat. Nos. 7,603,783 and 7,117,602 Miter Plane U.S. Pat. Nos. 7,603,783 and 7,117,602 The Veritas Miter Plane is essentially a large block plane that can be used for end-grain work, such as chamfers, trimming and fitting moldings, as well

More information

ASSIGNMENT 4. Textbook Assignment: The point, edge, face, heel, and tang are the five parts of which of the following tools?

ASSIGNMENT 4. Textbook Assignment: The point, edge, face, heel, and tang are the five parts of which of the following tools? ASSIGNMENT 4 Textbook Assignment: "Files," "Grinders and Sharpening Stones," "Scrapers," "Awls," "Bolt and Cable Cutters," "Glass Cutters," "Knives,' 'Pipe Cutting and Threading Tools," "Tube Cutting and

More information

Dates of Manufacture Units Produced Caliber Capacity Standard finish Cost Factory Customization Options

Dates of Manufacture Units Produced Caliber Capacity Standard finish Cost Factory Customization Options Dates of Manufacture Units Produced Caliber Capacity Standard finish Cost Factory Customization Options.22 Short 30c. per 100 rds 40c. per 100 rds.30 Long 70c. per 100 rds 60c. per 100 rds.38 Short 85c.

More information

I 640 West. c Offi. pany Phone. c ~ g CHICAGO 6. Ill. M h:tjryant OMPOUND RING BAR SUPPORT. GilBERT C DEarbom ~.

I 640 West. c Offi. pany Phone. c ~ g CHICAGO 6. Ill. M h:tjryant OMPOUND RING BAR SUPPORT. GilBERT C DEarbom ~. ll / - M h:tjryant c Offi I 640 West g CHICAGO 6. Ill pany Phone. c ~ GilBERT C DEarbom 2-5566 ~. OMPOUND TIL~:~ BORING, ~~: F:o~~:YH~~~ DRILLING ':~~~N~:E~~7:NE RECTANGULAR TAB ~~~;:E~:~z:T~~L TABLEe

More information

FULLER CHISELS CUTTING TOOLS

FULLER CHISELS CUTTING TOOLS CUTTING TOOLS Back FULLER CHISELS From the standard Wood Chisel to our top-of-the-line Woodworker s Chisel, FULLER offers the perfect combination of variety and quality in its chisel line-up. Finely honed

More information

VACUSEAL MODEL 300 & 400

VACUSEAL MODEL 300 & 400 VACUSEAL MODEL 300 & 400 G L HOT TUB PRODUCTS 2 Toelles Road, Suite 13 Wallingford, CT 06492 860-469-2580 www.hottubproducts.com J G F H H K E D C I A P B 10 9 8 7 6 5 4 3 2 1 0 0 1 Figure 1 2 3 4 SPAS

More information

ADJUSTING AJACK M41B SCOPE

ADJUSTING AJACK M41B SCOPE ADJUSTING AJACK M41B SCOPE I was a bonehead, and managed to delete the previous post on this subject while trying to move it, so here it is again, but this time with pics! All of the elevation adjustments

More information

Mobile Weapons Storage System Specifications

Mobile Weapons Storage System Specifications Mobile Weapons Storage System Specifications Whatever your weapon storage needs, Hi-Density s customized Weapons Storage System will be designed to fit your unique specifications. We recognize that security

More information

Bevels & Gauges. Measuring & Marking T-SLIDE BEVEL PLASTIC HANDLE T-SLIDE BEVEL - ABS HANDLE SLIDING BEVEL INDICATOR BEVEL PROTRACTOR

Bevels & Gauges. Measuring & Marking T-SLIDE BEVEL PLASTIC HANDLE T-SLIDE BEVEL - ABS HANDLE SLIDING BEVEL INDICATOR BEVEL PROTRACTOR T-SLIDE BEVEL - ABS HANDLE For determining existing angles or transferring angles onto a workpiece Slotted hardened steel blade allows the user to accommodate a wide range of different size work pieces

More information

Fastener Basics. Common Fastener Types. Fastener Materials. Grade / Class and Fastener Strength

Fastener Basics. Common Fastener Types. Fastener Materials. Grade / Class and Fastener Strength Fastener Basics Common Fastener Types Fastener Grade (US) or Class (metric) refers to the mechanical properties of the fastener material. Generally, a higher number indicates a stronger, more hardened

More information

A Pictorial of David Dawes AA400 HFT Thumbhole Stock in the Making

A Pictorial of David Dawes AA400 HFT Thumbhole Stock in the Making DRAFT Version A Pictorial of David Dawes AA400 HFT Thumbhole Stock in the Making Part 1 and finally Part 2 as well Updated: February 2008 By James Mitchell (a.k.a. mitchejc) Note: Building rifle stocks

More information

OPERATING INSTRUCTIONS MODULGRAV. Tel. +49 (0) Fax +49 (0) homepage:

OPERATING INSTRUCTIONS MODULGRAV. Tel. +49 (0) Fax +49 (0) homepage: OPERATING INSTRUCTIONS MODULGRAV Kolpingstraße -7 D-784 Singen / Htwl. Postfach 80 D-784 Singen / Htwl. Tel. +49 (0) 77 88-0 Fax +49 (0) 77 88 66 e-mail: info@elma-ultrasonic.com homepage: www.elma-ultrasonic.com

More information

Looking for a small band saw? The Ellis 1100 band saw might be just what you are looking for.

Looking for a small band saw? The Ellis 1100 band saw might be just what you are looking for. 1100 MITRE BAND SAW Looking for a small band saw? The Ellis 1100 band saw might be just what you are looking for. This portable band saw moves easily to the job site. Use it as horizontal or vertical saw.

More information

XEROX PHASER 3600 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS

XEROX PHASER 3600 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS XEROX PHASER 3600 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS XEROX PHASER 3600 TONER CARTRIDGE REMANUFACTURING THE XEROX PHASER 3600 TONER CARTRIDGE By Mike Josiah and the Technical Staff at UniNet The

More information

STAR TOOL SUPPLY / GRAND TOOL SUPPLY

STAR TOOL SUPPLY / GRAND TOOL SUPPLY Made of hardened and tempered tool steel with ground points. es have knurled grip. Set consists of 1 each of 5 punches in plastic pouch. Point Size Length 1/16 3 3040004 5/64 4 3040005 3/32 4 3040006 9/64

More information

***** TJ's CUSTOM WORK PACKAGES *****

***** TJ's CUSTOM WORK PACKAGES ***** TJ's Custom Gunworks JANUARY 2012 Price Guide WWW.TJSCUSTOMGUNWORKS.COM (page 1) ***** TJ's CUSTOM WORK PACKAGES ***** SIG SAUER: LEVEL ONE DELUXE $399 INCLUDES: A FULL DELUXE ACTION & TRIGGER JOB, SMOOTHING

More information

Instructions For PRECISION FIT STOCK. Welcome To The New World Of Shooting! Expect To Win!

Instructions For PRECISION FIT STOCK. Welcome To The New World Of Shooting! Expect To Win! Instructions For PRECISION FIT STOCK Welcome To The New World Of Shooting! Expect To Win! TABLE OF CONTENTS 1. Measure your existing stock and record your data below 2. Remove existing stock 3. Install

More information

CALIPERS, DIVIDERS AND TRAMMELS

CALIPERS, DIVIDERS AND TRAMMELS J.W. DONCHIN CO. 4841-43 W. Chicago Ave. Chicago, IL 60651-3224 Ph: 773-261-2182 Fax: 773-261-2867 Sales@jwdonchin.com www.jwdonchin,com CALIPERS, DIVIDERS 353 Introduction 354 Toolmakers' Spring-Type

More information

Bullnose Plane 05P42.01

Bullnose Plane 05P42.01 Bullnose Plane 05P42.01 Patent Pending The Veritas Bullnose Plane, perfect for cleaning up machine-cut joints, will be one of the most useful hand joinery tools you ll ever own. Designed for maximum versatility,

More information

B & M HARDWARE. Timely Hardware. Builders Hardware House Restoration Hardware Furniture & Cabinet Hardware. Classic, Traditional & Vintage Styles

B & M HARDWARE. Timely Hardware. Builders Hardware House Restoration Hardware Furniture & Cabinet Hardware. Classic, Traditional & Vintage Styles Vol. 14 $12.00 B & HARDWARE Timely Hardware Builders Hardware House Restoration Hardware Furniture & Cabinet Hardware Classic, Traditional & Vintage Styles B & Hardware 4125 Avenida de la Plata Oceanside

More information

1. The Lathe. 1.1 Introduction. 1.2 Main parts of a lathe

1. The Lathe. 1.1 Introduction. 1.2 Main parts of a lathe 1. The Lathe 1.1 Introduction Lathe is considered as one of the oldest machine tools and is widely used in industries. It is called as mother of machine tools. It is said that the first screw cutting lathe

More information

Make your railing view friendly with the original stainless steel cable infill for wood, metal, and composite-sleeved wood railing.

Make your railing view friendly with the original stainless steel cable infill for wood, metal, and composite-sleeved wood railing. Make your railing view friendly with the original stainless steel cable infill for wood, metal, and composite-sleeved wood railing. 1 Feeney makes it easy The CableRail cable infill system is slender,

More information

CALIBURN ASSEMBLY INSTRUCTIONS

CALIBURN ASSEMBLY INSTRUCTIONS CALIBURN ASSEMBLY INSTRUCTIONS The Caliburn is a Mag-Fed Pump-Action Homemade Nerf Blaster design released as a Public Domain license file set by Captain Slug (http://www.captainslug.com). You are welcome

More information

15 Industrial Tools. Recognized by Professionals. Work Together. Scribing Needle. Replacement of Scribing Needle. Features. Use A B

15 Industrial Tools. Recognized by Professionals. Work Together. Scribing Needle. Replacement of Scribing Needle. Features. Use A B Industrial Tools Recognized by Professionals Work Together With battery : Sleeve package Card Box Clear package Scribing Needle 74444 74468 78638 78646 7864 7860 7444 74469 Retracts needle by turning body

More information

The Lyra Double Double Mounting System Manual

The Lyra Double Double Mounting System Manual The Lyra Double Double Mounting System Manual The Lyra DDMS is a device for quickly connecting two cylinders together. It is specifically designed for connecting a finder scope to a larger telescope without

More information

Honda Gold Wing GL1800 Floorboards Installation Instructions #GL18020

Honda Gold Wing GL1800 Floorboards Installation Instructions #GL18020 Honda Gold Wing GL1800 Floorboards Installation Instructions #GL18020 1. Place the motorcycle on its centerstand. Remove the left and right stock foot pegs and mounts (four Allen screws, 6mm wrench size).

More information

Quality Normal steel chrome-plated, Scale glare-free matt-chrome-plated. Quality Normal steel chrome-plated, Scale glare-free matt chrome-plated.

Quality Normal steel chrome-plated, Scale glare-free matt-chrome-plated. Quality Normal steel chrome-plated, Scale glare-free matt chrome-plated. 37006 Bevel protractors 0 - With degree graduation 0-180 and locking screw Normal steel chrome-plated, Scale glare-free matt-chrome-plated. 37006 Measuring/ Arc Ø Blade length 37006 80 120 101 120 150

More information

Measuring and Laying-Out Tools, Testing Instruments

Measuring and Laying-Out Tools, Testing Instruments ß 7006 0 With 0-180 scale and locking screw. Protractors Measuring and Laying-Out Tools, Testing Instruments Standard steel, chrome-plated, scale dazzle-free and with matt-chrome finish. 7006 Arc Ø Blade

More information

By Professor Parabellum

By Professor Parabellum By Professor Parabellum Introduction The following lightweight and highly compact machine pistol design is quick to manufacture and contains a low number of components. It's minimalist layout incorporates

More information

BE1151 Precision Priming Press Instructions

BE1151 Precision Priming Press Instructions BE1151 Precision Priming Press Instructions Tech Support: (360) 676-3299 Email: service@bullets.com Web: www.bullets.com Shell Holder Not Included. Introduction The Model BE1151 is designed to be the ultimate

More information