A A A

Size: px

Start display at page:

Download "A A A"

Eugene Tucker
5 years ago
Views:

1 Hatsan Escort GA Akita Adjustable A A A Four Position Adjustable Scorpion Recoil Pad Adjustable Soft Touch Padded Cheekrest

ATI is not responsible for damage to property, injury, or death resulting from improper installation, misuse or modification of products.

2 Hatsan Escort GA Akita Adjustable [] M8 x.5 x 40mm Socket Head Cap Screw [] 5/6 Lock Washer [] 8mm Washer Phillips Head Screwdriver Wrench Set Allen Set! Warning: When handling a firearm, always follow the proper handling procedures at all times. Failure to follow these procedures could result in serious damage, injury, or death. ATI is not responsible for damage to property, injury, or death resulting from improper installation, misuse or modification of products. If you are not comfortable completing any of the following steps, or do not have the proper tools enlist the help of your local gunsmith. ATI is not responsible for components that are damaged due to improper installation. A Removal Point the shotgun in a safe direction and place the saftey in the "on" position. Next pull back on the slide, and carefully inspect the chamber to be sure the shotgun is unloaded. Remove the existing recoil pad from your stock by unscrewing the two phillips head screws in the rear of the pad as seen in Figure. Next, use a long flat head screwdriver or appropriate socket with extension as seen in Figure A to remove the stock bolt from the inside of the opening in the rear of the stock as seen in Figure B

3 Hatsan Escort GA Akita Adjustable B Akita Installation Using a phillips head screwdriver unscrew and remove the recoil pad from the rear of the ATI stock as seen in Figure. Using a phillips head screwdriver unscrew and remove the screw from the rear of the lever housing as seen in Figure

Hatsan Escort GA Akita Adjustable B Akita Installation -Continued 3 Next, remove the

buttstock from the grip slide as seen in Figure 3B. 3A 3B 4 Using the supplied M8 x.

lock washer and insert the bolt into the grip as seen in Figure 4.

4 Hatsan Escort GA Akita Adjustable B Akita Installation -Continued 3 Next, remove the lever assembly from the bottom of the stock as seen in Figure 3A, and remove the buttstock from the grip slide as seen in Figure 3B. 3A 3B 4 Using the supplied M8 x.5 x 40mm Socket Head Cap Screw slide the () 8mm washers on the bolt and then the 5/6 lock washer and insert the bolt into the grip as seen in Figure Align the Akita and bolt to the Hatsan Adapter. Begin to thread the bolt into the receiver as seen in Figure

Hatsan Escort GA Akita Adjustable B Akita Installation -Continued 6 With the Akita, bolt, and adapter aligned correctly, use an allen driver to tighten and

6 7 Slide the rear proportion of the buttstock on to the grip slide to the fully closed position as seen in Figure 7A, and insert the lever assembly into the

5 Hatsan Escort GA Akita Adjustable B Akita Installation -Continued 6 With the Akita, bolt, and adapter aligned correctly, use an allen driver to tighten and secure the stock to the Escort Shotgun as seen in Figure 6. Note: Do not over tighten. 6 7 Slide the rear proportion of the buttstock on to the grip slide to the fully closed position as seen in Figure 7A, and insert the lever assembly into the bottom of the stock as seen in Figure 7B. You can now reinstall the rear lever housing screw you removed earlier. 7A 7B 8 Next, reinstall the recoil pad to the back of the stock using a phillips head screw driver as seen in Figure

Hatsan Escort GA Akita Adjustable B Akita Installation -Continued 9 Adjust the cheek rest by removing the screw cover and the small set screw as seen in Figure 9.

6 Hatsan Escort GA Akita Adjustable B Akita Installation -Continued 9 Adjust the cheek rest by removing the screw cover and the small set screw as seen in Figure 9. The cheek rest slides back toward the recoil pad and can then be moved up or down. Slide it back into place at the desired height and reinstall the set screw and cover. Note: Snap in cheekrest plugs are used on the camo version, use a small screwdriver or similar tool to pop out the plug. # #

B B B

B B B Winchester SXP Gauge Tactlite Six Position Adjustable Shotgun Stock with Scorpion Recoil System B..0.00 B..0.00 B..0.00 Removable/Adjustable Tactical Cheekrests X Scorpion Recoil Pad Dual Sided QD Attachment