2014 Lancer Systems all rights reserved

Size: px
Start display at page:

Download "2014 Lancer Systems all rights reserved"

Transcription

1 2014 Lancer Systems all rights reserved

2 PROPRIETARY NOTICE: This contains Lancer Systems confidential, proprietary and/or competition sensitive data. ITAR NOTICE: Warning This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C. Sec. 2751, et. Seq.) or the Export Administration Act of 1979 as amended, Title 50 U.S.C. App et, seq. Violations of these export laws are subject to severe criminal penalties. Disseminate in Accordance with provisions of DOD Directive Lancer Systems is AS9100C:2009 ISO9001:2008 CERTIFIED Page 2

3 Table of Contents Safety Rules.. 4 Fixed Butt Stock... Description. 5 Rifle length stock replacement Collapsible stock replacement Page 3

4 Safety Rules Cardinal Rules of Firearms Safety 1. Treat every firearm as if it were loaded until positively ascertained otherwise by you 2. Never point a firearm at anything or anybody that you do not intend to shoot, or in a direction where an unintentional discharge may do harm 3. Never place your finger into the trigger guard until ready and justified to fire 4. Be sure of your threat, backstop and beyond Rendering a Firearm Safe 1. Always point a firearm in the safest direction (MUZZLE AWARENESS) 2. Safety ON (if applicable) 3. Magazine removed (or cylinder open, unload cylinder) 4. Bolt, slide or cocking lever locked to the rear 5. Visually and physically inspect the chamber NOTE: Wear eye protection during disassembly and reassembly of your firearm. Page 4

5 Fixed Stock Installation Fixed Butt Stock CARBON FIBER STOCK Description: The Lancer Carbon Fiber Stock (LCS) is a lightweight fixed stock for 5.56mm and 7.62mm AR style rifles that uses a fixed rifle length buffer tube (not included). Applying our expertise in advanced materials and product design, we ve combined high strength carbon-fiber and impact resistant injection molded polymer components to create a robust, lightweight buttstock. The carbon-fiber tube has a custom profile that provides strength and a comfortable cheek weld. The butt plate and front collar are injection molded from a specially formulated impact resistant polymer. PART NUMBER DESCRIPTION LENGTH WEIGHT LCS-A1-R Carbon Fixed Stock - A1 Length oz LCS-A2-R Carbon Fixed Stock - A2 Length oz Page 5

6 Tool Box: If your rifle already has a rifle stock, buffer, buffer tube and buffer spring, all you will need is a: Flat blade screw driver AR lower receiver vise block If your rifle/carbine has a mil-spec collapsible stock you will need to purchase separately a rifle buffer, buffer tube and buffer spring. Page 6

7 Rifle length stock disassembly 1. Conduct a clearing procedure to ensure the rifle is clear, safe and empty. 2. Field strip the rifle. Separate the upper and lower receivers and place the lower receiver on a lower receiver vice block 3. Using a flat blade screw driver, remove the top screw of the butt stock located on the rear of the stock plate. CAUTION 4. Slide off the stock and spacer ensuring not to lose the take-down pin detent and spring which will appear on the lower right side of the lower receiver as the stock is withdrawn. Page 7

8 Fixed stock assembly 1. Assemble the three parts of the fixed stock into one piece. 2. Slide the assemblage over the buffer tube. CAUTION 3. Align the front piece of the stock with the rear of the lower receiver and put pressure on the rear takedown detent spring. Be careful not to bend or crush the spring. 4. Seat the stock assemblage against the lower receiver and hold in place. Page 8

9 5. Insert retaining screw then tighten. Fixed stock is assembled Function check of the stock: Try to twist the stock Try to pull the stock off the lower receiver Pull out the rear take-down pin to the right and ensure it is locked in by the detent Attach the upper receiver to the lower Assemble all components of the rifle Remove the rifle from the vice block Rifle is ready for field testing Page 9

10 Collapsible mil spec carbine stock replacement If your rifle/carbine has a mil spec collapsible stock you will need to purchase separately a rifle buffer, buffer tube and buffer spring. Parts required before you begin. Tool Box: 1/8 inch, broad pin punches front pivot pin, buffer detent, takedown pin Screw driver, flat blade, long shank (grip screw) Buffer tube retaining castle nut spanner wrench AR lower receiver vise block Torque wrench AR barrel nut wrench Page 10

11 Collapsible stock disassembly 1. Conduct a clearing procedure to ensure the rifle is clear, safe and empty. 2. Field strip the rifle, separate the upper receiver from the lower and place the lower receiver on a vice block. 3. While pulling down on the lock release lever, pull the butt stock to the rear and remove it from the buffer tube. 4. Depress the buffer retaining plunger (with your finger, thumb or punch) and remove the buffer and spring from the buffer tube. Page 11

12 5. Hold the hammer down and pull the buffer and buffer spring completely out of the buffer tube. 6. Using a spanner wrench, loosen the buffer tube locking nut. 7. Holding the receiver endplate,(which encloses the rear assembly pin helical spring and detent) carefully back off the buffer tube locking nut. (NOTE: this helical spring and detent holds the rear assembly pin into the receiver) 8. Slowly relieve pressure on the receiver endplate, which will release the spring tension on the rear assembly pin spring and detent. Be careful not to lose the spring or detent. Page 12

13 9. Carefully rotate the receiver endplate counterclockwise just enough to expose the rear assembly pin spring. 10. Remove the rear assembly pin spring and detent from the receiver. 11. Remove the rear assembly pin. Page 13

14 12. While maintaining pressure on the buffer retaining plunger, unscrew the buffer tube from the receiver. 13. Remove the buffer retaining plunger and spring from the receiver. Collapsible stock assembly has been removed from the lower receiver. Page 14

15 Fixed stock assembly 1. Begin to thread the rifle length buffer tube onto the lower receiver. 2. Insert buffer detent and spring 3. Holding down the detent, continue to thread the buffer tube onto the lower receiver. 4. Hand tighten the buffer tube against the lower receiver. Page 15

16 5. Using the buffer tube castle nut spanner wrench, tighten the buffer tube. NOTE: An AR barrel nut wrench attached to a torque wrench may be used to torque the tube to ft lbs. 6. Insert the rear take-down pin and then insert the rear take-down pin detent and spring. 7. Slide the three-part fixed stock assemblage over the buffer tube. 8. Align stock with the rear of the lower receiver and against the detent spring. Page 16

17 9. Seat the stock against the lower receiver ensuring the detent spring is not bent or crushed and hold in place. 10. Insert the retaining screw and hand tighten. 11. Tighten with a flat blade screw driver. Fixed stock is assembled Function check of the stock: Try to twist the stock Try to pull the stock off the lower receiver Pull out the rear take-down pin to the right and ensure it is locked in by the detent Attach the upper receiver to the lower Assemble all components of the rifle Remove the rifle from the vice block Rifle is ready for field testing Page 17

M14 MODULAR CHASSIS SYSTEM (MOD 1) INSTRUCTION MANUAL. West Springfield, MA Phone: (866) FAX: (413)

M14 MODULAR CHASSIS SYSTEM (MOD 1) INSTRUCTION MANUAL.   West Springfield, MA Phone: (866) FAX: (413) M14 MODULAR CHASSIS SYSTEM (MOD 1) INSTRUCTION MANUAL Troy Industries, Inc. WWW.TROYIND.COM West Springfield, MA 01089 Phone: (866) 788-6412 FAX: (413) 383-0339 Thank You M14/M1A MODULAR CHASSIS SYSTEM

More information

M14 MODULAR CHASSIS SYSTEM (MOD 1) INSTRUCTION MANUAL. West Springfield, MA Phone: (866) FAX: (413)

M14 MODULAR CHASSIS SYSTEM (MOD 1) INSTRUCTION MANUAL.  West Springfield, MA Phone: (866) FAX: (413) M14 MODULAR CHASSIS SYSTEM (MOD 1) INSTRUCTION MANUAL Troy Industries, Inc. WWW.TROYIND.COM West Springfield, MA 01089 Phone: (866) 788-6412 FAX: (413) 383-0339 Thank You M14/M1A MODULAR CHASSIS SYSTEM

More information

AR15 SUPER SLIM AND ULTRA SLIM FREE FLOAT RAIL SYSTEMS

AR15 SUPER SLIM AND ULTRA SLIM FREE FLOAT RAIL SYSTEMS MUM066011803 AR15 SUPER SLIM AND ULTRA SLIM FREE FLOAT RAIL SYSTEMS Proudly Designed and Made in USA Super Lightweight, Flush Fitting, and Continuous with Flat Top AR15 Upper Receiver Features Integral

More information

AR-15 Armorer s Essentials Kit. Product # Instructions # Revision: B

AR-15 Armorer s Essentials Kit. Product # Instructions # Revision: B AR-15 Armorer s Essentials Kit Product #156111 Instructions #1025769 Revision: B 1 INDEX 3 AR-15 Adjustable Receiver Link 3 Pivot Pin and Roll Pin Installation Tool 4 Mag well Vise Block 7 Upper Vise Block

More information

AR MODEL 308 SUPERSLIM FREE FLOAT RAIL SYSTEM

AR MODEL 308 SUPERSLIM FREE FLOAT RAIL SYSTEM MUM049011501 AR MODEL 308 SUPERSLIM FREE FLOAT RAIL SYSTEM Item No.: MTU020SSKA / MTU020SSKB / MTU020SSKC / MTU026SSKA / MTU026SSKB / MTU026SSKC & All Color Versions Proudly Designed and Manufactured in

More information

AR-15 Lower Receiver Assembly Instructions

AR-15 Lower Receiver Assembly Instructions AR-15 Lower Receiver Assembly Instructions Tools There are a few tools that make it easier to put together these kits, but none of them are necessary. Minimum requirements include a hammer and punch to

More information

1) Place the magazine cut-off in the center position between off and on (as shown in figure 1). 2) Remove the bolt.

1) Place the magazine cut-off in the center position between off and on (as shown in figure 1). 2) Remove the bolt. 1) Place the magazine cut-off in the center position between off and on (as shown in figure 1). 2) Remove the bolt. 3) Unscrew upper band screw. 4) Remove the upper band screw. 5) Loosen the stacking swivel

More information

Arisaka Type 38 Rifle Disassembly and Reassembly

Arisaka Type 38 Rifle Disassembly and Reassembly Page 1 of 27 Arisaka Type 38 Rifle Disassembly and Reassembly Disassembly Instructions 1) Open the bolt as show in figure 1. Page 2 of 27 2) Open the bolt release. 3) Remove the bolt. 4) Remove the bolt/receiver

More information

AXIOM Rifle Stock. Owner s Manual. Installation Instructions

AXIOM Rifle Stock. Owner s Manual. Installation Instructions AXIOM Rifle Stock Owner s Manual Page 1 Installation Instructions ATTENTION: Read and follow all instructions and warnings prior to installation and/or firing a Axiom equipped firearm. Take extra time

More information

QB78 CO 2 Pellet Rifle

QB78 CO 2 Pellet Rifle QB78 CO 2 Pellet Rifle Maintenance Instructions Text and photos by George Fox Lang The Chinese QB78 pellet rifle is one of the nicest and most popular CO 2 rifles ever produced. Here are the long-wanted

More information

RTI TECHNOLOGIES, INC.

RTI TECHNOLOGIES, INC. RTI TECHNOLOGIES, INC. BRC500 & BRC550 Arbor/Spindle Mechanism Adjustment & Service Technical Instructions The arbor/spindle mechanism of the BRC500/550 is designed to be robust for long life. Occasionally

More information

A A A

A A A Hatsan Escort GA Akita Adjustable A..0.03 A..0.03 A..30.03 3 Four Position Adjustable Scorpion Recoil Pad Adjustable Soft Touch Padded Cheekrest 3 70.0795.0 Hatsan Escort GA Akita Adjustable [] M8 x.5

More information

B B B

B B B Stock with Scorpion Recoil Pad B..0.0 B..0.0 B..0.0 Removable/Adjustable Tactical Cheekrests X Scorpion Recoil Pad Dual Sided QD Attachment Point Six Position Adjustable Stock Slim Line Rear Aluminum Receiver

More information

How to: Disassemble and Reassemble the M1 Garand.

How to: Disassemble and Reassemble the M1 Garand. Yugo M-48 M1 Garand Russian Mosin Nagant Swiss Schmidt Rubin Swedish Mauser German Mauser 98k Finnish Nagant Nagant Carbines How to: Disassemble and Reassemble the M1 Garand. So, you just purchased a surplus

More information

MIL-STD B (SH) UPDATE

MIL-STD B (SH) UPDATE MIL-STD-2042-5B (SH) UPDATE Method 5A1 Insert Equipment and materials (to be added to table 5A1-I) Pliers 3.2.2.2 Cable and fiber preparation for Fiber Systems International backshells. Step 1: Ensure

More information

Maintenance & Parts list for:

Maintenance & Parts list for: Maintenance & Parts list for: Industrial gun GB 2 Juni 2017 This Maintenance & Parts list for industrial gun is prepared by : Winchester Europe Service V. Parbst & Søn as a comprehensive maintenance guide

More information

Regulator installation guide Air Arms S4xx/S5xx

Regulator installation guide Air Arms S4xx/S5xx Welcome to Huma-Air. We design and manufacture brand- and model specific precision regulators for PCP air rifles. By using only the highest quality materials such as aircraft grade aluminum, aluminumbronze,

More information

M*CARBO Winchester Model 70 Trigger Spring Kit Download or Print Instructions Contact: Page 1

M*CARBO Winchester Model 70 Trigger Spring Kit Download or Print Instructions Contact: Page 1 Download or Print Instructions Contact: help@mcarbo.com Page 1 Step 1: Clear your Firearm - Remove the magazine, check the chamber, bolt face and magazine well. Step 2: Gather Parts and Tools Needed Step

More information

DO35 MAINTENANCE INSTRUCTIONS

DO35 MAINTENANCE INSTRUCTIONS CUSTOMER INFORMATION SHEET NO. 038 DO35 MAINTENANCE INSTRUCTIONS (DO35 V3 LAUNCHED PRODUCTION JUNE 2017) Table of Contents 1.0 Replacing Spindle Bushes V3... 22 2.0 Replacing Locking Mechanism V3... 6

More information

HOW TO TUNE A QB SERIES CO2 AIRGUN FOR NOOBS.

HOW TO TUNE A QB SERIES CO2 AIRGUN FOR NOOBS. THE UK CHINESE AIRGUN FORUM PRESENTS... HOW TO TUNE A QB SERIES CO2 AIRGUN FOR NOOBS. DISCLAIMER: THE FOLLOWING GUIDE WILL IMPROVE THE PERFORMANCE AND SMOOTHNESS OF THESE AIRGUNS, IT IS ESSENTIAL THAT

More information

Installation Instructions for FC2 & FC15 Forward Controls for the Super Magna

Installation Instructions for FC2 & FC15 Forward Controls for the Super Magna Installation Instructions for FC2 & FC15 Forward Controls for the Super Magna It is highly recommended that you use a thread lock compound such as Loctite brand on all threads to keep them from vibrating

More information

REPAIR INSTRUCTIONS. Cat. No Cat. No MILWAUKEE ELECTRIC TOOL CORPORATION. SDS Max Demolition Hammer. SDS Max Rotary Hammer

REPAIR INSTRUCTIONS. Cat. No Cat. No MILWAUKEE ELECTRIC TOOL CORPORATION. SDS Max Demolition Hammer. SDS Max Rotary Hammer Cat. No. 9-0 SDS Max Demolition Hammer Cat. No. -0 SDS Max Rotary Hammer MILWAUKEE ELECTRIC TOOL CORPORATION W. LISBON ROAD BROOKFIELD, WISCONSIN 00-0 8-9-0 d 000 8-9-0 d Special Tools Require Forcing

More information

B B B

B B B Winchester SXP Gauge Tactlite Six Position Adjustable Shotgun Stock with Scorpion Recoil System B..0.00 B..0.00 B..0.00 Removable/Adjustable Tactical Cheekrests X Scorpion Recoil Pad Dual Sided QD Attachment

More information

OD1505 MAINTENANCE OF THE M249 MACHINEGUN

OD1505 MAINTENANCE OF THE M249 MACHINEGUN SUBCOURSE OD1505 EDITION 7 MAINTENANCE OF THE M249 MACHINEGUN US ARMY TANK TURRET REPAIRER CORRESPONDENCE COURSE MOS/SKILL LEVEL: 45K30 MAINTENANCE OF THE M249 MACHINEGUN SUBCOURSE NO. OD1505 US Army

More information

Page 1. SureMotion Quick-Start Guide: LARSACC_QS 1st Edition - Revision A 03/15/16. Standard Steel Bolt/Screw Torque Specifications

Page 1. SureMotion Quick-Start Guide: LARSACC_QS 1st Edition - Revision A 03/15/16. Standard Steel Bolt/Screw Torque Specifications R K C T I Repair Kit Product Compatibility Repair Kit # Linear Actuator Assembly # LARSACC-013 LARSACC-014 LARSD2-08T12BP2C (12-in travel) LARSD2-08T24BP2C (24-in travel) C P I R K 1 ea Ball Screw with

More information

OPERATIONAL MANUAL V1.0. Removing/Replacing Blades

OPERATIONAL MANUAL V1.0. Removing/Replacing Blades OPERATIONAL MANUAL V1.0 BLUEROCK WS-212 Wire Stripper Removing/Replacing Blades CAUTION!! IMPORTANT!! DANGER!! WARNING!! DISCONNECT MACHINE FROM POWER BEFORE PROCEEDING!! Estimated Completion Time: 90

More information

Specifications: Hole Sizes: Selector Pin Hole: 3/8 (0.375 ) Trigger Pin Hole: 5/32 (0.156 ) Hammer Pin Holes: 5/32 (0.156 )

Specifications: Hole Sizes: Selector Pin Hole: 3/8 (0.375 ) Trigger Pin Hole: 5/32 (0.156 ) Hammer Pin Holes: 5/32 (0.156 ) 80% Arms AR-15 Jig manual Thank you for purchasing our AR- 15 jig. This precision self- aligning jig will allow you to finish your 80% Arms and other 80% lowers using only a drill press and a few common

More information

Ringblaster Mark IV Maintenance Guide. Version 1.5

Ringblaster Mark IV Maintenance Guide. Version 1.5 Ringblaster Mark IV Maintenance Guide Version 1.5 WARNING Winchester Industrial Equipment and Loads must be properly stored, handled and maintained for safe and proper function. Mishandling or failure

More information

JARVIS. Model Brisket Scissor EQUIPMENT... TABLE OF

JARVIS. Model Brisket Scissor EQUIPMENT... TABLE OF Model 423-17 Brisket Scissor EQUIPMENT SELECTION... Ordering No. TABLE OF CONTENTS... Page Model 423--17... 4037003 Air Filter / Regulator / Lubricator 3022003 Air Hose Assembly... 3059018 Balancer...

More information

Mechanical Frappe Press

Mechanical Frappe Press Mechanical Frappe Press Operation Manual CONTENTS OPERATIONAL INSTRUCTIONS PRECAUTIONS PART NAMES INCLUDED ITEMS BASIC OPERATION MAINTENANCE REPLACEMENT PARTS Thank you for using The Frapptastic Five Mechanical

More information

H8508 Impact Wrench SERVICE MANUAL. Model (Serial Code FWN) Model (Serial Code FWP)

H8508 Impact Wrench SERVICE MANUAL. Model (Serial Code FWN) Model (Serial Code FWP) SERVICE MANUAL H8508 Impact Wrench Model 48755 (Serial Code FWN) Model 48760 (Serial Code FWP) Read and understand all of the instructions and safety information in this manual before operating or servicing

More information

Cut-True 16M Manual Paper Cutter

Cut-True 16M Manual Paper Cutter Cut-True 16M Manual Paper Cutter 2/2013 OPERATOR MANUAL FIRST EDITION TABLE OF CONTENTS TOPIC PAGE Specifications 1 Safety Guidelines 1 Assembly 2 Overview 3 Description of Equipment Parts 3-4 Operation

More information

OTECO INC. MODEL ,000 PSI 4-1/16 PORT DM GATE VALVE MAINTENANCE MANUAL

OTECO INC. MODEL ,000 PSI 4-1/16 PORT DM GATE VALVE MAINTENANCE MANUAL Page 1 of 7 OTECO INC. MODEL 45 4 5,000 PSI 4-1/16 PORT DM GATE VALVE MAINTENANCE MANUAL Page 2 of 7 TABLE OF CONTENTS 1. Assembly Blowout 2. Repair Kit Contents & Technical Specifications 3. Disassembly

More information

HDL(M)6 Nut/Screw Assembly

HDL(M)6 Nut/Screw Assembly HDL(M)6 Nut/Screw Assembly Remove, repair, and reassemble the nut and screw assembly in your HDL series double lock vise. In these instructions when we refer to the front of the vise or nut/screw assembly,

More information

Maintenance Information

Maintenance Information 16601023 Edition 2 January 2014 Air Impact Wrench 2705P1 Maintenance Information Save These Instructions Product Safety Information WARNING Failure to observe the following warnings, and to avoid these

More information

Table of Content. Sayl Disassembly for Recycling

Table of Content. Sayl Disassembly for Recycling Y Sayl Disassembly for Recycling Table of Content 1. Work Chair Disassembly... 2 2. Side Chair Disassembly...17 3. Work Stool Footring Disassembly... 22 1 Y Sayl Disassembly for Recycling Work Chair Disassembly

More information

Practical Scrap Metal Small Arms Vol.10 By Professor Parabellum

Practical Scrap Metal Small Arms Vol.10 By Professor Parabellum Practical Scrap Metal Small Arms Vol.10 By Professor Parabellum Introduction The 9mm submachine gun design described here is extremely basic and can be put together using very limited tools and materials.

More information

White Quail Auto Trap

White Quail Auto Trap White Quail Auto Trap WARNING SAFETY, STORAGE & USE IF THE MAIN SPRING IS ATTACHED AND THE TRAP ARM IS IN THE 6 O CLOCK POSITION, THE TRAP IS ARMED AND EXTREME CAUTION IS REQUIRED. TO DISARM, TURN THE

More information

Rhino Packing Gland Tool

Rhino Packing Gland Tool Instruction Sheet P/N Rhino Packing Gland Tool 1. Description See Figure 1. The Rhino packing gland tool is used to remove the packing gland from Rhino bulk unloader pumps. The tool consists of two components,

More information

Power Train Lift Max. Capacity: 1,250 lbs.

Power Train Lift Max. Capacity: 1,250 lbs. 655 EISENHOWER DRIVE OWATONNA, MN 55060 USA PHONE: (507) 455-7000 TECH. SERV.: (800) 533-6127 FAX: (800) 955-8329 ORDER ENTRY: (800) 533-6127 FAX: (800) 283-8665 INTERNATIONAL SALES: (507) 455-7223 FAX:

More information

General Safety and Maintenance Manual 3 H.P HORIZONTAL GRINDERS. and Thread RPM T1-5/8-11 X 1.9. Lever. Lever. Handle

General Safety and Maintenance Manual 3 H.P HORIZONTAL GRINDERS. and Thread RPM T1-5/8-11 X 1.9. Lever. Lever. Handle HENRY TOOLS Industrial Airtools at Work General Safety and Maintenance Manual 3 H.P HORIZONTAL GRINDERS 3 H.P HORIZONTAL GRINDERS Capacity: -6 Inch (150 mm) or 8 Inch (200 mm) Type 1 Wheels -Any Type 16,

More information

STEINBERGER TRANSTREM (TYPE 2) TECHNICAL DOCUMENT

STEINBERGER TRANSTREM (TYPE 2) TECHNICAL DOCUMENT STEINBERGER TRANSTREM (TYPE 2) TECHNICAL DOCUMENT These instructions apply to newer style TransTrems only (non-threaded ball type or modified threaded ball type). For purposes of discussion, these TransTrems

More information

VIPER 4 TOOL SERVICE MANUAL

VIPER 4 TOOL SERVICE MANUAL VIPER 4 TOOL SERVICE MANUAL 11.14.2014 INTRODUCTION 1 The Model VIPER 4 troubleshooting/service manual has been developed to assist ITW CCNA field sales and distributor field/service personnel in servicing

More information

Service Manual. Chipper/Shredder - CS4210 and CS4265 IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY

Service Manual. Chipper/Shredder - CS4210 and CS4265 IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY Service Manual Chipper/Shredder - CS4210 and CS4265 IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY This Service Manual is not a substitute for the Operator s Manual. You must read, understand

More information

DYNATRAC BALL JOINT REBUILD INSTRUCTIONS V4.0

DYNATRAC BALL JOINT REBUILD INSTRUCTIONS V4.0 DYNATRAC PRODUCTS 2007-2016 4X4 JEEP JK HEAVY DUTY BALL JOINT JP44-2X3050-C DYNATRAC BALL JOINT REBUILD INSTRUCTIONS V4.0 WARNING: Improper use or installation of this product can cause major failures

More information

1. Turn off or disconnect power to unit (machine). 2. Push IN the release bar on the quick change base plate. Locking latch will pivot downward.

1. Turn off or disconnect power to unit (machine). 2. Push IN the release bar on the quick change base plate. Locking latch will pivot downward. Figure 1 Miniature Quick Change Applicators, of the end feed type, are designed to crimp end feed strip terminals to prestripped wires. Each applicator is set up to accept the strip form of certain specific

More information

CARBINE BOLT ASSEMBLY AND DISASSEMBLY WITHOUT THE BOLT TOOL

CARBINE BOLT ASSEMBLY AND DISASSEMBLY WITHOUT THE BOLT TOOL March 2016, page 1 of 7 CARBINE BOLT ASSEMBLY AND DISASSEMBLY WITHOUT THE BOLT TOOL The below article was scanned from the Army magazine, The Ordnance Sergeant, dated March 1945. Thanks to John Spangler

More information

CALIBURN ASSEMBLY INSTRUCTIONS

CALIBURN ASSEMBLY INSTRUCTIONS CALIBURN ASSEMBLY INSTRUCTIONS The Caliburn is a Mag-Fed Pump-Action Homemade Nerf Blaster design released as a Public Domain license file set by Captain Slug (http://www.captainslug.com). You are welcome

More information

PROSTEER BALL JOINT REBUILD INSTRUCTIONS V1.0

PROSTEER BALL JOINT REBUILD INSTRUCTIONS V1.0 DYNATRAC PRODUCTS 2003-2010 4X4 DODGE 2500/3500 HEAVY DUTY BALL JOINT PROSTEER BALL JOINT REBUILD INSTRUCTIONS V1.0 WARNING: Improper use or installation of this product can cause major failures that could

More information

ELECTRIC TOOL CORPORATION

ELECTRIC TOOL CORPORATION Cat. No. -0 / Hex Demolition Hammer Cat. No. 0-0 Spline Rotary Hammer MILWAUKEE ELECTRIC TOOL CORPORATION W. LISBON ROAD BROOKFIELD, WISCONSIN 00-0 -9-00 d 000 -9-00 d SpecialTools Require Forcing discs

More information

MUELLER. Improved, Centurion Series, Modern Improved, and 107. Fire Hydrants. Inserting Extention Sections. Reliable Connections

MUELLER. Improved, Centurion Series, Modern Improved, and 107. Fire Hydrants. Inserting Extention Sections. Reliable Connections insertion Instructions manual MUELLER Improved, Centurion Series, Modern Improved, and 107 table of contents PAGE Centurion Series Fire Hydrant Adding an Extention 2-3 Improved Fire Hydrant Inserting Extention

More information

General Safety and Maintenance Manual

General Safety and Maintenance Manual General Safety and Maintenance Manual 3 H.P HORIZONTAL GRINDERS CAPACITY -6 Inch (150 mm) or 8 Inch (200 mm) Type 1 Wheels -Any Type 16, 17, 17R, 18 or 18R Cone Wheels w/ 5/8-11 Mounting 3 H.P HORIZONTAL

More information

1904, 1904Pg, 1904PgSB, and 1906SB High Capacity Ratchet Knockout Drivers

1904, 1904Pg, 1904PgSB, and 1906SB High Capacity Ratchet Knockout Drivers INSTRUCTION MANUAL 1904, 1904Pg, 1904PgSB, and 1906SB High Capacity Ratchet Knockout Drivers Read and understand all of the instructions and safety information in this manual before operating or servicing

More information

Replacement of Pitch Link Retainer and Service Improvement of the Pitch Control System. Effectivity: Helicopters manufactured prior to January, 1981

Replacement of Pitch Link Retainer and Service Improvement of the Pitch Control System. Effectivity: Helicopters manufactured prior to January, 1981 Page 1 of 12 Date: December 2, 1981 Subject: Models: Replacement of Pitch Link Retainer and Service Improvement of the Pitch Control System F-28C and 280C Effectivity: Helicopters manufactured prior to

More information

Assembly, Use and Care Instructions

Assembly, Use and Care Instructions Assembly, Use and Care Instructions Product #336677 Instruction #1068318 Rev. F Thank you for purchasing a Caldwell Lead Sled DFT 2. The Lead Sled DFT 2 comes to you partially assembled. It will require

More information

General Safety and Maintenance Manual

General Safety and Maintenance Manual General Safety and Maintenance Manual 4 H.P HORIZONTAL GRINDERS CAPACITY -6 Inch (150 mm) or 8 Inch (200 mm) Type 1 Wheels -Any Type 16, 17, 17R, 18 or 18R Cone Wheels w/ 5/8-11 Mounting 65H Series 4 H.P

More information

DYNATRAC BALL JOINT REBUILD INSTRUCTIONS V5.0

DYNATRAC BALL JOINT REBUILD INSTRUCTIONS V5.0 DYNATRAC PRODUCTS 2007-2018 JEEP JK HEAVY DUTY BALL JOINT JP44-2X3050-C DYNATRAC BALL JOINT REBUILD INSTRUCTIONS V5.0 WARNING: Improper use or installation of this product can cause major failures that

More information

PORTABLE PULL TESTER

PORTABLE PULL TESTER 2425 West Vineyard Avenue, Escondido, California 92029-222 Phone: (800) 284-4460 Fax: (760) 746-4295 PORTABLE CABLE TERMINAL PULL TESTER AT520CT (Revised July 2003) AT520CT Portable Cable Terminal Pull

More information

Footprint Mobile Assembly Instructions

Footprint Mobile Assembly Instructions Footprint Mobile Assembly Instructions 1998754 Revision -1 Complete Series Master Packet If you have any questions concerning these instructions, please call Kimball Office Customer Service. 20 Kimball

More information

RIVAL CALIBURN ASSEMBLY

RIVAL CALIBURN ASSEMBLY RIVAL CALIBURN ASSEMBLY 08/02/18 The RIVAL Caliburn is a Mag-Fed Pump-Action Homemade Nerf Blaster design released as a Public Domain license file set by Captain Slug (http://www.captainslug.com). You

More information

LPK1550 Hydraulic Crimping Tool 15-ton

LPK1550 Hydraulic Crimping Tool 15-ton SERVICE MANUAL LPK1550 Hydraulic Crimping Tool 15-ton Serial Code FYF Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register

More information

BUILDING A GHOST GLOCK. Prepper Mike

BUILDING A GHOST GLOCK. Prepper Mike BUILDING A GHOST GLOCK Prepper Mike WHAT IS A GHOST GLOCK? Ghost guns are guns that don t need to be registered Ghost guns are built by the owner based on not more than 80% complete lowers Ghost guns are

More information

MUELLER. Improved, Centurion Series, Modern Improved, and 107. Fire Hydrants. Inserting Extension Sections. Reliable Connections

MUELLER. Improved, Centurion Series, Modern Improved, and 107. Fire Hydrants. Inserting Extension Sections. Reliable Connections insertion Instructions manual MUELLER Improved, Centurion Series, Modern Improved, and 107 table of contents PAGE Centurion Series Fire Hydrant Adding an Extension 2-3 Improved Fire Hydrant Inserting Extension

More information

Repair Instructions. Replacing a La Z Time Mechanism Side Subassembly. Remove the Back(s): Remove the Mechanism Assembly: CAUTION.

Repair Instructions. Replacing a La Z Time Mechanism Side Subassembly. Remove the Back(s): Remove the Mechanism Assembly: CAUTION. Replacing a La Z Time Mechanism Side Subassembly Tools Required: Slotted Screwdriver Power Driver 8" Driver Extension Ruler Note: Extension springs are not typically used on non-chaise standard width styles,

More information

w w w. h d o n l i n e s h o p. d e AUTOMATIC COMPRESSION RELEASE TOOL GENERAL INSTALLATION -J04654 REV Kit Number Models

w w w. h d o n l i n e s h o p. d e AUTOMATIC COMPRESSION RELEASE TOOL GENERAL INSTALLATION -J04654 REV Kit Number Models -J05 REV. 008-0- GENERAL Kit Number 98-08 Models AUTOMATIC COMPRESSION RELEASE TOOL For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com

More information

BACKSAVER VERSION 1.5 Hammer Drill Attachment

BACKSAVER VERSION 1.5 Hammer Drill Attachment User Manual BACKSAVER VERSION 1.5 Hammer Drill Attachment Table of Contents Product Display..1 Instructions...2-7 Product Use..8 Disclaimer and Warranty.9 1 Attaching Backsaver Version 1.5 to Dewalt Hammer

More information

SINCE 1922 P UBLICATION N O

SINCE 1922 P UBLICATION N O SINCE 1922 GARED SPORTS MICRO-Z SET-UP INSTRUCTIONS VERY IMPORTANT! READ INSTRUCTIONS CAREFULLY AND FOLLOW STEP BY STEP SET-UP PROCEDURE P UBLICATION N O. 5 5 1 7 5 2 9 1 6 Recommended tools and accessories.

More information

RULTRACT RETRACTOR CABLE REPLACEMENT INSTRUCTIONS. Rultract, Inc. is the ONLY authorized service center in the U.S.A.

RULTRACT RETRACTOR CABLE REPLACEMENT INSTRUCTIONS. Rultract, Inc. is the ONLY authorized service center in the U.S.A. RULTRACT RETRACTOR CABLE REPLACEMENT INSTRUCTIONS Rultract, Inc. is the ONLY authorized service center in the U.S.A. When your Rultract instrument needs repair or service, contact Rultract Inc. or Rultract

More information

CarvLock HDLM6 Manual Machinable Jaw Vise

CarvLock HDLM6 Manual Machinable Jaw Vise CarvLock HDLM6 Manual Machinable Jaw Vise Instructions KURT MANUFACTURING INDUSTRIAL PRODUCTS DIVISION 1325 QUINCY STREET NE MINNEAPOLIS, MN. 55413 TOLL FREE: (800) 328-2565 TEL: (763) 572-4424 FAX: (612)

More information

pneumatic c-ring tool

pneumatic c-ring tool pneumatic c-ring tool hc5 HC5 WARNINGS! Always read tool manual before operating tool. Always wear safety glasses when operating or while in the area where a tool is being used. When test cycling tool

More information

MODELS 49 RA 49 RAZ 49 RAC

MODELS 49 RA 49 RAZ 49 RAC General Safety and Maintenance Manual MODEL grinder featuring a rear exhaust. Model Number Exhaust Direction REAR Throttle Type (L) Lever or (K) Safety Lever Speed 12000 to 14000 R.P.M (13500rpm is standard)

More information

PM-01 Bolter 9mm Luger Carbine

PM-01 Bolter 9mm Luger Carbine PM-01 Bolter 9mm Luger Carbine Disgned by Petr Malik For Educational Purposes Only! I m not responsible, in any shape or form, for the acts of others. For those who do not know, the PM-01 (Petr Malik-gun

More information

8690 Series. Ratchet Type Cutters 8690FH 8690FSK 8690CK 8690CS 8690TN. Service Manual P /01/2012

8690 Series. Ratchet Type Cutters 8690FH 8690FSK 8690CK 8690CS 8690TN. Service Manual P /01/2012 Service Manual P18690 11/01/01 8690FH 8690FSK 8690CK 8690CS 8690TN 8690 Series Ratchet Type Cutters For additional product information visit our website at http://www.apextoolgroup.com P18690 11/01/01

More information

LG400 Operating Instructions

LG400 Operating Instructions Preface: Dear Sports Marksman/Markswoman, Thank you for choosing one of our products. The new LG400 product series combines the latest innovations with time-tested technology. This is a sports rifle of

More information

CALIBURN ASSEMBLY INSTRUCTIONS

CALIBURN ASSEMBLY INSTRUCTIONS CALIBURN ASSEMBLY INSTRUCTIONS The Caliburn is a Mag-Fed Pump-Action Homemade Nerf Blaster design released as a Public Domain license file set by Captain Slug (http://www.captainslug.com). You are welcome

More information

YALE FIGURE 500 & 500R CLOSURE OPERATION AND MAINTENANCE INSTRUCTIONS

YALE FIGURE 500 & 500R CLOSURE OPERATION AND MAINTENANCE INSTRUCTIONS YALE FIGURE 500 & 500R CLOSURE OPERATION AND MAINTENANCE INSTRUCTIONS IMPORTANT INFORMATION Note To Supervisor: Please share this information with your employees and make sure they have received training

More information

By Professor Parabellum

By Professor Parabellum By Professor Parabellum Introduction The following lightweight and highly compact machine pistol design is quick to manufacture and contains a low number of components. It's minimalist layout incorporates

More information

CALIBURN ASSEMBLY INSTRUCTIONS

CALIBURN ASSEMBLY INSTRUCTIONS CALIBURN ASSEMBLY INSTRUCTIONS The Caliburn is a Mag-Fed Pump-Action Homemade Nerf Blaster design released as a Public Domain license file set by Captain Slug (http://www.captainslug.com). You are welcome

More information

MODEL SK61732 COMPRESSOR SERVICE KIT

MODEL SK61732 COMPRESSOR SERVICE KIT MODEL SK61732 COMPRESSOR SERVICE KIT For use on 607 and 617 Model Compressors with.32 Stroke WARNING: Unplug the compressor before beginning disassembly. CAUTION: Improper assembly or use of damaged parts

More information

Page 1. SureMotion Quick-Start Guide: LACPACC_QS 1st Edition - Revision A 03/15/16

Page 1. SureMotion Quick-Start Guide: LACPACC_QS 1st Edition - Revision A 03/15/16 R K C T I Repair Kit Product Compatibility Repair Kit # Linear Actuator Assembly # LACPACC-002 LACPACC-003 LACP-16TxxLP5 (0.5-in lead screw pitch) LACP-16TxxL1 (1-in lead screw pitch) C P I R K 4 ea Flanged

More information

PNEUMATIC C-RING TOOLS SC73462 SAFETY INSTRUCTIONS. WARNINGS Always read tool manual before operating.

PNEUMATIC C-RING TOOLS SC73462 SAFETY INSTRUCTIONS. WARNINGS Always read tool manual before operating. PNEUMATIC C-RING TOOLS SC73462 SAFETY INSTRUCTIONS WARNINGS Always read tool manual before operating. Always wear safety glasses while operating or while in the vicinity of a tool in operation. For testing,

More information

JVice Care and Maintenance Thanks for purchasing a Jvice. If properly looked after your Jvice will give a lifetime of tying pleasure.

JVice Care and Maintenance Thanks for purchasing a Jvice. If properly looked after your Jvice will give a lifetime of tying pleasure. JVice Care and Maintenance Thanks for purchasing a Jvice. If properly looked after your Jvice will give a lifetime of tying pleasure. Although it is manufactured from highest quality materials any metal

More information

Standard External Cutters. Manual E525

Standard External Cutters. Manual E525 Standard External Cutters Manual E525 CONTENTS Logan Standard External Cutters Overview... 2 Uses... 2 Construction... 2 Spring Dog Assembly... 2 Ratchet Pawl Assembly... 2 Slip Assembly... 5 Tool Illustrations...

More information

Fisher 667 Diaphragm Actuators Size 80 and 100

Fisher 667 Diaphragm Actuators Size 80 and 100 Instruction Manual 667 Size 80 and 100 Actuators Fisher 667 Diaphragm Actuators Size 80 and 100 Contents Introduction... 1 Scope of Manual... 1 Description... 2 Specifications... 2 Maximum Pressure Limitations...

More information

GENUINE PARTS INSTALLATION INSTRUCTIONS

GENUINE PARTS INSTALLATION INSTRUCTIONS GENUINE PARTS INSTALLATION INSTRUCTIONS DESCRIPTION: APPLICATION: PART NUMBER: Fifth Wheel Adapter Titan 999T5 W4198 KIT CONTENTS: Item Qty. Part Description Service Part Number A 1 Fifth Wheel Adapter

More information

MORTISE LOCK INSTALLATION INSTRUCTIONS

MORTISE LOCK INSTALLATION INSTRUCTIONS MORTISE LOCK INSTALLATION INSTRUCTIONS INSPIRE TM ROSELESS DESIGNER TRIM FM 340 Rev. 10/18 TABLE OF CONTENTS: DOOR PREPARATION 1 ML2000 LOCK HANDING 2 FULL WORKING TRIM (STD) 3 HALF WORKING TRIM (M30)

More information

Technical Information

Technical Information SPRING CYLINDER DISASSEMBLY The purpose of this document is to provide the service technician a fundamental understanding of the rammer foot disassembly procedure. It is recommended only authorized service

More information

Chin Strap, Sealed Pull Pins and Swing Catch for Fiberglass Helmets. Contents

Chin Strap, Sealed Pull Pins and Swing Catch for Fiberglass Helmets. Contents Chin Strap Chin Strap, Sealed Pull Pins and Swing Catch for Fiberglass Helmets Contents BTM-1 1.1 Chin Strap BTM-4 1.2.3.1 Preparation BTM-1 1.1.1 Chin Strap Removal BTM-4 1.2.3.2 Disassembly BTM-1 BTM-2

More information

EP-60 END OF CAR JUNCTION BOX KIT and ASSEMBLY AND INSTALLATION INSTRUCTIONS

EP-60 END OF CAR JUNCTION BOX KIT and ASSEMBLY AND INSTALLATION INSTRUCTIONS EP-60 END OF CAR JUNCTION BOX KIT 786282 and 786438 ASSEMBLY AND INSTALLATION INSTRUCTIONS Figure 1 EP-60 End of Car Junction Box Kit Item No. Qty. Description P/N Kit No. 786282 Kit No. 786438 1 2 Screw,

More information

Fisher 667 Diaphragm Actuator Sizes 30/30i 76/76i and 87

Fisher 667 Diaphragm Actuator Sizes 30/30i 76/76i and 87 Instruction Manual 667 Actuator (Size 30/30i - 76/76i and 87) Fisher 667 Diaphragm Actuator Sizes 30/30i 76/76i and 87 Contents Introduction... 1 Scope of Manual... 1 Description... 2 Specifications...

More information

SAFETY INSTRUCTIONS. WARNINGS Always read tool manual before operating.

SAFETY INSTRUCTIONS. WARNINGS Always read tool manual before operating. SAFETY INSTRUCTIONS WARNINGS Always read tool manual before operating. Always wear safety glasses while operating or while in the vicinity of a tool in operation. For testing, always cycle tool away from

More information

CALIBURN ASSEMBLY INSTRUCTIONS

CALIBURN ASSEMBLY INSTRUCTIONS CALIBURN ASSEMBLY INSTRUCTIONS The Caliburn is a Mag-Fed Pump-Action Homemade Nerf Blaster design released as a Public Domain license file set by Captain Slug (http://www.captainslug.com). You are welcome

More information

Due to possible damage in shipping, the vertical stop assembly has been removed from this machine.

Due to possible damage in shipping, the vertical stop assembly has been removed from this machine. Due to possible damage in shipping, the vertical stop assembly has been removed from this machine. To assemble, insert the threaded rod through the shroud opening in the top of the machine. Start the four

More information

STANDARD AND PREMIUM AR-15/M16/M4 ARMORER S KIT # /

STANDARD AND PREMIUM AR-15/M16/M4 ARMORER S KIT # / STANDARD AND PREMIUM AR-15/M16/M4 ARMORER S KIT #080-001-291/080-001-292 Congratulations! Your new Armorer s Kit contains the most comprehensive group of repair and maintenance tools ever offered to the

More information

SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27B

SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12 DUAL BEVEL COMPOUND MITER SAW B27B PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS = Part number change from previous service

More information

Assembly Instructions

Assembly Instructions page 1 Serious personal-injury to the operator or bystanders, as well as damage to equipment or property, can occur, if all safety and assembly instructions, provided with this product, are not followed.

More information

Thank you for considering "cutting edge technology."

Thank you for considering cutting edge technology. Thank you for considering "cutting edge technology." Most woodworkers know that a shear cut is far better than a straight cut. They also know that a staggered cut is much better than just a single straight

More information

MUELLER GAS. DH-5/EH-5 Drilling. Reliable Connections. DH-5 Drilling Machine General Information 2. EH-5 Drilling Machine General Information 3

MUELLER GAS. DH-5/EH-5 Drilling. Reliable Connections. DH-5 Drilling Machine General Information 2. EH-5 Drilling Machine General Information 3 operating Instructions manual MUELLER GAS TAble of contents PAGE DH-5 Drilling Machine General Information 2 DH-5/EH-5 Drilling EH-5 Drilling Machine General Information 3 Operating Instructions 4-5 DH-5

More information

COMMON WRENCHES INTRODUCTION

COMMON WRENCHES INTRODUCTION COMMON WRENCHES INTRODUCTION A wrench is a hand tool used to provide grip and mechanical advantage in applying torque to turn objects usually nuts and bolts. Wrenches allow us to use less force to rotate

More information

R-EVO MANUAL. English

R-EVO MANUAL. English R-EVO MANUAL English 1 ENGLISH VERSION Adjusting the holster for your revolver With versatility, refined design, high quality, elegance and resistance - R-EVO, the new GR Holster for revolvers, supplies

More information