PRICE LIST. Finland. Delivery program No. 70 Valid from

Transcription

1 PRICE LIST Finland Delivery program No. 70 Valid from

2 PLEASE NOTE Customer price list for new guns and accessories. Prices are in Euro including 24 % VAT. Delivery program No. 70 Valid from As we continuously work to improve our product line, we ask for your understanding that features and technical information may vary slightly on the final product. Goods remain property of Krieghoff until full payment has been received. We reserve the right to make any changes to price, design, technical aspects, color and/or accessories supplied with any of the products described in this price list. Purchaser must possess a valid firearm permit. Our general terms and conditions apply to all orders ( The place of jurisdiction for both parties is Ulm. All information supplied is without guarantee. All rights reserved. H. Krieghoff GmbH Hunting and Sporting Arms Boschstrasse Ulm Germany Phone: +49 (0) 7 31 / Fax: +49 (0) 7 31 / info@krieghoff.de KRIEGHOFF IMPORTER

3 CONTENTS I. Krieghoff Optima Drilling, double rifle drilling and Big Five double rifle 2 drilling II. Krieghoff Ultra Over & under rifle/shotgun combination, over & under double 8 rifle and Bergstutzen III. Krieghoff Classic Side-by-side double rifle and Big Five side-by-side double rifle, 13 side-by-side rifle/shotgun combination and side-by-side shotgun IV. Krieghoff Hubertus Single shot rifle 18 V. Krieghoff Semprio In-Line repeater 22 VI. Krieghoff Trumpf Drilling and double rifle drilling 26 VII. Competition shotguns K-80 over & under shotgun 31 K-20 over & under shotgun 34 KX-6 single barrel shotgun 34 VIII. Krieghoff Essencia Side-by-side sidelock shotgun 40 Single shot sidelock rifle 41 Big Five side-by-side sidelock double rifle 42 IX. Engravings Hunting guns 43 Semprio 46 Competition shotguns 47 X. Various Service and options 55 Appendix 58 XI. Memo 61 1

4 OPTIMA KRIEGHOFF OPTIMA Krieghoff Optima Drilling shown with additional options Engraving: Large game scene with leaf arabesques Optima standard configuration: Set trigger integrated in the front trigger Universal Trigger System Combi-Cocking Device Steel trigger guard Front plate for pivot bridge mount 1 Steel shot proofed depending on choke size and material of the receiver Quick detachable sling swivels Nickel plated receiver finish Ornamental line engraving borders receiver Hinge screws, top latch, screws and pins are blued Standard wood Right-handed stock with Bavarian-style cheekpiece 1 and Schnabel forearm Supplied in Krieghoff GunPack Optima 12 and 20 drilling thermo stable Action available in steel or duraluminium; standard barrel length: 55 cm (22"); standard stock length: 37 cm (14.5"), incl. 15 mm (0.6") rubber recoil pad in black ,00 Optima 20 drilling with 1-2 special trigger system Features same action as Optima drilling, without the need for a barrel selector. Further information on this exceptional version can be found in the Krieghoff Hunting Gun Catalog ,00 Optima 20 double rifle drilling Steel receiver; standard barrel length: 55 cm (22"); standard stock length: 37 cm (14.5"), incl. 15 mm (0.6") rubber recoil pad in black ,00 Optima 20 double rifle drilling with 1-2 special trigger system Features same action as Optima double rifle drilling, without the need for a barrel selector. Further information on this exceptional version can be found in the Krieghoff Hunting Gun Catalog ,00 Optima 20 Big Five double rifle drilling 2 Steel receiver; standard barrel length: 60 cm (24"); traditionally soldered; standard stock length: 38 cm (15"), incl. 15 mm (0.6") rubber recoil pad in black; steel trigger base plate and heavy stock bolt for weight and balance optimization; open sight featuring wide V-shape middle sight, ball shaped front bead and Big Five stock contour ,00 1 Except for Optima Big Five. 2 Custom made. 2

5 Optima 12 and 20 Drilling traditionally soldered Action available in steel or duraluminium; standard barrel length: 60 cm (24"); standard stock length: 37 cm (14.5"), incl. 15 mm (0.6") rubber recoil pad in black ,00 OPTIMA CALIBRES AND GAUGES Rimless cartridges require the installation of a spring-loaded extractor claw. Extra cost regarding this feature can be found under category additional equipment. Optima 12 and 20 drilling thermo stable Rifle calibres: 6.5x57R, 6.5x65R, 7x57R, 7x65R,.308 Win.,.30 06,.30R Blaser, 8x57IRS, 8x75RS, 9.3x74R Shotgun calibres: 12/70, 12/76 1, 20/76 Choke: 1/2 3/4 Optima 20 double rifle drilling Rifle calibres: 7x57R, 7x65R,.308 Win.,.30 06,.30R Blaser, 8x57IRS, 8x75RS, 9.3x74R Shotgun calibres: 20/76 Choke: 3/4 Optima 20 Big Five double rifle drilling Rifle calibres:.375 Flanged,.450/.400 N.E.,.500/.416 N.E. (3 1/4"),.470 N.E. Shotgun calibres: 20/76 Choke: 3/4 Optima 12 and 20 drilling traditionally soldered Rifle calibres: 6.5x57R, 6.5x65R, 7x57R, 7x65R,.308 Win.,.30 06,.30R Blaser, 8x57IRS, 8x75RS, 9.3x74R Shotgun calibres: 12/70, 12/76 1, 20/76 Choke: 1/2 3/4 Custom calibres and gauges Further calibres and gauges on request. from 1.174,00 ADDITIONAL EQUIPMENT Spring loaded extractor claws, per barrel For rimless cartridges Automatic set trigger release, per set trigger Not in combination with single trigger and Krieghoff 1-2 trigger Second set trigger installed in the rear trigger Krieghoff 1-2 trigger Different barrel length 60 cm (24") for thermostable model Optima drilling 55 cm (22") for traditionally soldered Optima drilling Single combination trigger featuring set trigger device, non selective Fixed firing sequence: right barrel left barrel or bottom barrel top barrel. Because of the fixed firing sequence, this feature is not recommended for models with selective barrels, e. g. drillings with insert barrels. Single triggers are generally available up to calibre.375, but not in combination with the automatic set trigger release. 163,00 117,00 526,00 681,00 526,00 526,00 526,00 1 Steel receiver only. 3

6 OPTIMA Cosmetic sideribs for models thermo stable For optimum and aesthetic reasons, the side rib is best fitted after scope mounting and sighting-in and we strongly recommend that this process is carried out at the factory. Not available for Optima 12 featuring 60 cm (24") barrel length. 331,00 Krieghoff see through sight For Optima 12 and 20 drilling thermo stable and Optima 20 double rifle drilling 2-way flip sight For Optima double rifle drilling. Wide U-shaped middle sight for shotshell and slug use. Fine U-shaped sight for rifle use. BreaKO recoil reducer Fitting included (weight: 350 g/12.3 oz, diameter: 22.5 mm, length: 100 mm) Folding and express sights Express sights with two folding leaves for Optima Big Five double rifle drilling Express sights with two folding leaves for Optima Big Five double rifle drilling; Sighting-in distances and vertical gold lines inlaid into both fixed and folding leaves. Shotgun barrels sighted-in with slugs according to Langenhagener Norm : 1 Models thermo stable: One barrel on Optima 12 and 20 thermo stable Both barrels on Optima 12 and 20 thermo stable Traditional soldered models: One barrel on drilling and double rifle drilling model Optima Both barrels on Optima drilling 292,00 95,00 209,00 619, ,00 158,00 368,00 313,00 626,00 ENGRAVINGS A display of our engraving motifs as well as custom engravings can be found on page 43. SCOPE MOUNTS All models are equipped with a compact short rib for maximum strength and durability, and are prepared for the pivot bridge mount In our view the best and most aesthetically pleasing mount for this type of gun. Optima 12 and 20 drilling thermo stable Pivot bridge mount Optima 20 double rifle drilling Pivot bridge mount Tip-off mount for red dot sight Optima 20 Big Five double rifle drilling Pivot bridge mount Fitting a base plate for Optima Big Five For pivot bridge mount 787, ,00 724, ,00 no extra charge 1 Not available in conjunction with screw-in chokes. Please pay attention to the instructions about scope mounts on page 61. 4

7 INTERCHANGEABLE BARREL SETS OPTIMA Interchangeable barrel sets together with the complete forend wood assembly in standard grade wood. Barrel fitting, proof testing and sighting-in are included. Interchangeable drilling barrel, thermo stable 1 Interchangeable double rifle drilling barrel, traditionally soldered (only Optima 20) Interchangeable double rifle drilling barrel Big Five, traditionally soldered (only Optima 20) Interchangeable drilling barrel, traditionally soldered 3.725, , , ,00 FLUSH FITTING BRILEY CHOKE INSTALLATION Flush at the barrel muzzle. Available in 12 and 20 gauge in the following constrictions: Cylinder (Cyl), Skeet (Sk), 1/4 (IC), 1/4 1/2 (LM), 1/2 (M), 3/4 (IM), 3/4 1/1 (LF), 1/1 (F), Super-1/1 (XF) Fitting of chokes, per barrel Briley screw-in choke, suitable for lead or steel shot (12 and 20 gauge) Choke wrench Speed wrench for quick choke changes (12 and 20 gauge) Special grease for choke Container for three chokes Container for five chokes 137,00 93,00 34,00 116,00 29,00 20,00 21,00 STOCKS & WOODWORK A custom fit stock is almost entirely hand made with only minimal pre-machining. Atypical stock dimensions and longer stock lengths generally require a custom fit stock. Further information on request. Wood upgrade Category 001 Category 002 Category 003 Category 004 Exclusive wood categories as stock blanks (hand-crafted) Due to the high cost of raw materials, wood grades higher than 004 require a hand made stock. Category C1 Category C2 Category C3 Right-handed stock (hand-crafted) Standard dimensions Special dimensions, made to customer s specifications Left-handed stock (hand-crafted) Left-handed stocks are always hand-crafted, to be able to offer all stock configurations also to left-handed shooters. Standard dimensions Special dimensions, made to customer s specifications 328,00 784, , , , , ,00 712, ,00 712, ,00 1 The gauge of the interchangeable barrel has to be the same as the gauge of the original barrel. 5

8 OPTIMA Forearm (hand-crafted) Standard dimensions Special dimensions, made to customer s specifications, beavertail or semi-beavertail forearm 187,00 432,00 Rubber recoil pad With leather cover; black or brown; 15, 20 or 25 mm; fitting included Stock magazine with hinged cover plate Ornamental line engraving borders receiver included. Other engravings upon request. 311, ,00 EXCLUSIVE OPTIONS Façon Exclusive The final shape and finish of the action body and furniture is individually created by the use of hand tools. Hand-polished stock-finish Fine checkering instead of standard checkering 1 Skip checkering instead of standard checkering 1 Full carving on grip and forearm 1 Full carving with leaf arabesques, English arabesques, enhanced English arabesques or oak leaves. Fish scale checkering instead of standard checkering on grip and forearm 1 Checkering with carved border on grip and forearm 1 Checkering surrounded by leaf arabesques, English arabesques, enhanced English arabesques or oak leaves. Ebony or rosewood endpiece on grip and forearm ,00 918,00 135,00 91, , , ,00 538,00 SURFACE FINISH Models featuring steel receivers in combination with steel base plates, can optionally be blued or nitrated. Blued surface finish Nitrated surface finish Complete nickel finish of all external parts PH-ProCoating (corrosion resistant Ilaflon-Coating for barrel and receiver) no extra charge 466,00 192,00 306,00 MONOGRAMS & LOCKS Monograms can be engraved into a separate steel plate, which is fitted into the pistol grip of the rear stock. Optionally, the monogram can be integrated into the trigger guard. Monogram plate, finished the same as the receiver Inletting into pistol grip cap Steel pistol grip cap 1 117,00 393,00 1 Only available in conjunction with hand-crafted stock. 6

9 Monograms Two letters engraved Two letters engraved in relief style Two letters in silver Two letters in gold 217,00 313,00 515,00 707,00 OPTIMA Locks Internal lock parts nickel plated Internal lock parts gold plated, triggers not included Trigger gold plated (for guns with only one trigger or single trigger option) Double triggers gold plated 352,00 805,00 143,00 200,00 KRIEGHOFF INSERT BARREL KS 1 The insert barrel KS can be sighted-in without removing it from the carrier barrel as adjustment is done at the muzzle of the insert barrel. The listed prices include fitting, proof testing and sighting-in. Drillings featuring light weight receivers, made from Duraluminium can only be equipped with.22 Hornet and 6x70R calibres and only if the lock up of the gun is in good condition. The exception here makes our Optima 20 drilling dural which features a specially designed lock up system, which is also suitable for larger calibres such as.222 Rem, 5.6x50R Mag. and 5.6x52R. The Optima drilling 12/76 (3") and 20/76 (3") in steel version fits all insert barrel calibres up to 9.3x74R. Gauge Hornet,.222 Rem., 5.6x50R Mag., 5.6x52R Savage, 6x70R, 6.5x57R, 7x57R, 7x65R,.30R Blaser, 8x57IRS, 8x75RS.308 Win.,.30 06, 9.3x74R Gauge Hornet,.222 Rem., 5.6x50R Mag., 5.6x52R Savage, 6x70R 6.5x57R, 7x57R, 7x65R,.30R Blaser, 8x57IRS, 8x75RS.308 Win.,.30 06, 9.3x74R EL 22 and EL , , , , ,00 price on request 1 The Krieghoff Insert Barrel KS is not suitable for barrels equipped with Briley chokes. 7

10 KRIEGHOFF ULTRA ULTRA Krieghoff Ultra Over & under double rifle shown with additional options Engraving: Large game scene with oak leaves Ultra standard configuration: Set trigger integrated in the front trigger Universal Trigger System Combi-Cocking Device Steel trigger guard Front plate for pivot bridge mount Steel shot proofed depending on choke size and material of the receiver Quick detachable sling swivels Nickel plated receiver finish Ornamental line engraving borders receiver Hinge screws, top latch, screws and pins are blued Standard wood Right-handed stock with Bavarian-style cheekpiece and Schnabel forearm Supplied in Krieghoff GunPack Ultra 20 over & under rifle/shotgun combination thermo stable Action available in steel or duraluminium; standard barrel length: 55 cm (22"); standard stock length: 37 cm (14.5") incl. 15 mm (0.6") rubber recoil pad in black ,00 Ultra 20 over & under double rifle thermo stable Steel receiver; standard barrel length: 60 cm (24"), or 55 cm (22") optionally; standard stock length: 37 cm (14.5") incl. 15 mm (0.6") rubber recoil pad in black ,00 Ultra 20 Bergstutzen thermo stable 1 Steel receiver; standard barrel length: 60 cm (24"), or 55 cm (22") optionally; standard stock length: 37 cm (14.5") incl. 15 mm (0.6") rubber recoil pad in black ,00 Ultra 20 over & under rifle/shotgun combination traditionally soldered Action available in steel or duraluminium; standard barrel length: 63.5 cm (25") or 60 cm (24") optionally; standard stock length: 37 cm (14.5") incl. 15 mm (0.6") rubber recoil pad in black ,00 CALIBRES AND GAUGES Rimless cartridges require the installation of a spring-loaded extractor claw. Extra cost regarding this feature can be found under category additional equipment. Ultra 20 over & under rifle/shotgun combination thermo stable Rifle calibres: 6.5x57R, 6.5x65R, 7x57R, 7x65R,.308 Win.,.30 06,.30R Blaser, 8x57IRS, 8x75RS, 9.3x74R Shotgun calibres: 20/76 1 Available on request. 8

11 Ultra 20 over & under double rifle thermo stable Same calibres in both barrels. Rifle calibres: 7x57R, 7x65R,.308 Win.,.30 06,.30R Blaser, 8x57IRS, 8x75RS, 9.3x74R Ultra 20 Bergstutzen thermo stable Rifle calibre bottom barrel:.22 Ho.,.222 Rem.,.243 Win., 5.6x50R Mag, 5.6x52R, 6.5x57R, 6.5x65R Rifle calibre top barrel: 7x57R, 7x65R,.308 Win.,.30 06,.30R Blaser, 8x57IRS, 8x75RS, 9.3x74R ULTRA Ultra 20 over & under rifle/shotgun combination traditionally soldered Rifle calibres: 6.5x57R, 6.5x65R, 7x57R, 7x65R,.308 Win.,.30 06,.30R Blaser, 8x57IRS, 8x75RS, 9.3x74R Shotgun calibres: 20/76 Custom calibres and gauges Further calibres and gauges on request. from 1.174,00 ADDITIONAL EQUIPMENT Spring loaded extractor claws, per barrel For rimless cartridges Automatic set trigger release, per set trigger Not in combination with single trigger and Krieghoff 1-2 trigger Second set trigger installed in the rear trigger Krieghoff 1-2 trigger Different barrel length 55 cm (22") for thermostable model Ultra over & under double rifle and Bergstutzen 60 cm (24") for thermostable model Ultra over & under rifle/shotgun combination Single combination trigger featuring set trigger device, non selective Fixed firing sequence: bottom barrel top barrel. Because of the fixed firing sequence, this feature is not recommended for models with selective barrels, e. g. over & under rifles and Bergstutzen. Not available in combination with the automatic set trigger release. Krieghoff see through sight For Ultra 20 over & under double rifle thermo stable 2-way flip sight For Ultra over & under rifle/shotgun combination. Wide U-shaped middle sight for shotshell and slug use. Fine U-shaped sight for rifle use. Cosmetic sideribs for models thermo stable For optimum and aesthetic reasons, the side rib is best fitted after scope mounting and sighting-in and we strongly recommend that this process is carried out at the factory. BreaKO recoil reducer Fitting included (weight: 350 g/12.3 oz, diameter: 22.5 mm, length: 100 mm) 163,00 117,00 526,00 681,00 no extra charge 526,00 526,00 292,00 95,00 331,00 209,00 9

12 Shotgun barrels sighted-in with slugs according to Langenhagener Norm : 1 Models thermo stable: One barrel on Ultra 20 over & under rifle/shotgun combination Traditional soldered models: One barrel on Ultra 20 over & under rifle/shotgun combination 158,00 313,00 ULTRA ENGRAVINGS A display of our engraving motifs as well as custom engravings can be found on page 43. SCOPE MOUNTS All models are equipped with a compact short rib for maximum strength and durability, and are prepared for the pivot bridge mount In our view the best and most aesthetically pleasing mount for this type of gun. Ultra 20 over & under rifle/shotgun combination thermo stable and over & under rifle/shotgun combination traditionally soldered Pivot bridge mount Ultra 20 over & under double rifle thermo stable Pivot bridge mount Pivot bridge ring mount for driven hunt scopes 2 Tip-off mount for red dot sight Ultra 20 Bergstutzen thermo stable Pivot bridge mount 787,00 931, ,00 724,00 931,00 INTERCHANGEABLE BARREL SETS Interchangeable barrel sets together with the complete forend wood assembly in standard grade wood. Barrel fitting, proof testing and sighting-in are included. Interchangeable over & under rifle/shotgun combination barrel, thermo stable Interchangeable over & under double rifle, thermo stable Interchangeable Bergstutzen barrel, thermo stable Interchangeable over & under rifle/shotgun combination barrel, traditionally soldered 2.085, , , ,00 FLUSH FITTING BRILEY CHOKE INSTALLATION Flush at the barrel muzzle. Available in 20 gauge in the following constrictions: Cylinder (Cyl), Skeet (Sk), 1/4 (IC), 1/4 1/2 (LM), 1/2 (M), 3/4 (IM), 3/4 1/1 (LF), 1/1 (F), Super-1/1 (XF) Fitting of chokes, per barrel Briley screw-in choke, suitable for lead or steel shot Choke wrench Speed wrench for quick choke changes Special grease for choke Container for three chokes Container for five chokes 137,00 93,00 34,00 116,00 29,00 20,00 21,00 1 Please pay attention to the instructions about scope mounts on page Designated driven hunt scopes are scopes on which the objective diameter is the same as the middle tube diameter. This kind of scopes can be mounted with the same distance in between the two mount bases as the regular pivot rail mount. 10

13 STOCKS & WOODWORK A custom fit stock is almost entirely hand made with only minimal pre-machining. Atypical stock dimensions and longer stock lengths generally require a custom fit stock. Further information on request. Wood upgrade Category 001 Category 002 Category 003 Category ,00 784, , ,00 ULTRA Exclusive wood categories as stock blanks (hand-crafted) Due to the high cost of raw materials, wood grades higher than 004 require a hand made stock. Category C1 Category C2 Category C3 Right-handed stock (hand-crafted) Standard dimensions Special dimensions, made to customer s specifications Left-handed stock (hand-crafted) Left-handed stocks are always hand-crafted, to be able to offer all stock configurations also to left-handed shooters. Standard dimensions Special dimensions, made to customer s specifications Forearm (hand-crafted) Standard dimensions Special dimensions, made to customer s specifications, beavertail or semi-beavertail forearm Rubber recoil pad With leather cover; black or brown; 15, 20 or 25 mm; fitting included Stock magazine with hinged cover plate Ornamental line engraving borders receiver included. Other engravings upon request , , ,00 712, ,00 712, ,00 187,00 432,00 311, ,00 EXCLUSIVE OPTIONS Façon Exclusive The final shape and finish of the action body and furniture is individually created by the use of hand tools. Hand-polished stock-finish Fine checkering instead of standard checkering 1 Skip checkering instead of standard checkering 1 Full carving on grip and forearm 1 Full carving with leaf arabesques, English arabesques, enhanced English arabesques or oak leaves ,00 918,00 135,00 91, ,00 1 Only available in conjunction with hand-crafted stock. 11

14 Fish scale checkering instead of standard checkering on grip and forearm 1 Checkering with carved border on grip and forearm 1 Checkering surrounded by leaf arabesques, English arabesques, enhanced English arabesques or oak leaves , ,00 ULTRA Ebony or rosewood endpiece on grip and forearm 1 538,00 SURFACE FINISH Models featuring steel receivers in combination with steel base plates, can optionally be blued or nitrated. Blued surface finish Nitrated surface finish Complete nickel finish of all external parts PH-ProCoating (corrosion resistant Ilaflon-Coating for barrel and receiver) no extra charge 466,00 192,00 306,00 MONOGRAMS & LOCKS Monograms can be engraved into a separate steel plate, which is fitted into the pistol grip of the rear stock. Optionally, the monogram can be integrated into the trigger guard. Monogram plate, finished the same as the receiver Inletting into pistol grip cap Steel pistol grip cap 1 Monograms Two letters engraved Two letters engraved in relief style Two letters in silver Two letters in gold Locks Internal lock parts nickel plated Internal lock parts gold plated, triggers not included Trigger gold plated (for guns with only one trigger or single trigger option) Double triggers gold plated 117,00 393,00 217,00 313,00 515,00 707,00 352,00 805,00 143,00 200,00 KRIEGHOFF INSERT BARREL KS 2 The insert barrel KS can be sighted-in, without deinstalling it from the carrier barrel. All adjustment is done at the muzzle of the insert barrel. The listed prices already include fitting, state certified proof and sighting-in. Over & under rifle/shotgun combination featuring light weight receivers, made from Duraluminium can only be equipped with 6x70R calibres and only, if the lock up of the gun is in good condition. Gauge Hornet,.222 Rem., 5.6x50R Mag., 5.6x52R Savage, 6x70R 6.5x57R, 7x57R, 7x65R,.30R Blaser, 8x57IRS, 8x75RS.308 Win.,.30 06, 9.3x74R EL 22 and EL , , ,00 price on request 1 Only available in conjunction with hand-crafted stock. 2 The Krieghoff Insert Barrel KS is not suitable for barrels equipped with Briley chokes. 12

15 KRIEGHOFF CLASSIC Krieghoff Classic Double Rifle Big Five shown with additional options and custom engraving Classic standard configuration: Set trigger integrated in the front trigger 1 Steel receiver Universal Trigger System Combi-Cocking Device Steel trigger plate and Steel trigger guard Front plate for pivot bridge mount 1 Quick detachable sling swivels Nickel plated receiver finish Ornamental line engraving borders receiver Hinge screws, top latch, screws and pins are blued Standard wood Right-handed stock with Bavarian-style cheekpiece 1 and Schnabel forearm Supplied in Krieghoff GunPack CLASSIC Classic double rifle Standard barrel length: 60 cm (24"); standard stock length: 37 cm (14.5") incl. 15 mm (0.6") rubber recoil pad in black ,00 Classic Big Five double rifle Standard barrel length: 60 cm (24"); standard stock length: 38 cm (15"); articulated front trigger without set trigger device; special weighted stock-bolt for optimum weight and balance; V-Shaped rear sight with bead front sight; right-handed Big Five stock incl. Old English rubber recoil pad in black ,00 Classic side-by-side shotgun Standard barrel length: 71 cm (28"); standard stock length: 37 cm (14.5") incl. 15 mm (0.6") rubber recoil pad in black; Steel shot proofed depending on choke size ,00 Classic side-by-side rifle/shotgun combination 2 Standard barrel length: 60 cm (24"); standard stock length: 37 cm (14.5") incl. 15 mm (0.6") rubber recoil pad in black. Steel shot proofed depending on choke size 8.365,00 CALIBRES AND GAUGES Rimless cartridges require the installation of a spring-loaded extractor claw. Extra cost regarding this feature can be found under category additional equipment. Classic Double rifle Rifle calibres: 7x57R, 7x65R,.308 Win.,.30 06,.30R Blaser, 8x57IRS, 8x75RS, 9.3x74R 1 Except for Classic Big Five. 2 Custom made. 13

16 Classic Big Five double rifle Rifle calibres:.375 Flanged Mag. N.E.,.375 H&H Mag.,.450/.400 N.E.,.500/.416 N.E. (3 ¼"),.470 N.E.,.500 N.E. (3") Classic side-by-side shotgun Shotgun calibres: 20/76 Classic side-by-side rifle/shotgun combination Shotgun calibres: 20/76 Rifle calibres: on request CLASSIC Custom calibres and gauges Further calibres and gauges on request. ADDITIONAL EQUIPMENT from 1.174,00 Intelligent Ejector System (IES) Fitting only possible for new guns. Spring loaded extractor claws, per barrel For rimless cartridges Automatic set trigger release, per set trigger Not in combination with single trigger and Krieghoff 1-2 trigger Second set trigger installed in the rear trigger Krieghoff 1-2 trigger Different barrel length 55 cm (22") for Classic double rifle (barrel length not available for Classic Big Five double rifle) Single combination trigger featuring set trigger device, non selective Fixed firing sequence: right barrel left barrel. Because of the fixed firing sequence, this feature is not recommended for models with selective barrels, e. g. side-by-side rifle/shotgun combination. Single triggers are generally available up to calibre.375, but not in combination with the automatic set trigger release. Krieghoff see through sight For Classic double rifle and Classic Big Five double rifle Folding and express sights Express sights with two folding leaves for Classic Big Five double rifle Express sights with two folding leaves for Classic Big Five double rifle; Sighting-in distances and vertical gold lines inlaid into both fixed and folding leaves. BreaKO recoil reducer Fitting included (weight: 350 g/12.3 oz, diameter: 22.5 mm, length: 100 mm) 1.570,00 163,00 117,00 526,00 681,00 526,00 526,00 292,00 619, ,00 209,00 Shotgun barrels sighted-in with slugs according to Langenhagener Norm : 1 Traditional soldered models: One barrel on Classic side-by-side shotgun or rifle/shotgun combination Both barrels on Classic side-by-side shotgun 158,00 368,00 1 Please pay attention to the instructions about scope mounts on page

17 ENGRAVINGS A display of our engraving motifs as well as custom engravings can be found on page 43. SCOPE MOUNTS All models are equipped with a compact short rib for maximum strength and durability, and are prepared for the pivot bridge mount In our view the best and most aesthetically pleasing mount for this type of gun. Classic Double rifle Pivot bridge mount Pivot bridge ring mount for driven hunt scopes 1 Tip-off mount for red dot sight 1.087, ,00 724,00 CLASSIC Classic Big Five double rifle Pivot bridge mount Pivot bridge ring mount for driven hunt scopes 1 Fitting a base plate for pivot bridge mount For Classic side-by-side double rifle For Classic side-by-side shotgun and Big Five side-by-side double rifle 1.403, ,00 no extra charge 225,00 INTERCHANGEABLE BARREL SETS Interchangeable barrel sets together with the complete forend wood assembly in standard grade wood. Barrel fitting, proof testing and sighting-in are included. Interchangeable double rifle barrel Interchangeable Big Five double rifle barrel Interchangeable side-by-side shotgun barrel (gauge 20/76 only) Interchangeable side-by-side rifle/shotgun combination barrel (gauge 20/76 only) Additional charge for interchangeable barrel with ejectors , , , ,00 556,00 FLUSH FITTING BRILEY CHOKE INSTALLATION Flush at the barrel muzzle. Available in 20 gauge in the following constrictions: Cylinder (Cyl), Skeet (Sk), 1/4 (IC), 1/4 1/2 (LM), 1/2 (M), 3/4 (IM), 3/4 1/1 (LF), 1/1 (F), Super-1/1 (XF) Fitting of chokes, per barrel Briley screw-in choke, suitable for lead or steel shot Choke wrench Speed wrench for quick choke changes Special grease for choke Container for three chokes Container for five chokes 137,00 93,00 34,00 116,00 29,00 20,00 21,00 1 Designated driven hunt scopes are scopes on which the objective diameter is the same as the middle tube diameter. This kind of scopes can be mounted with the same distance in between the two mount bases as the regular pivot rail mount. 2 Only in conjunction with an prepared receiver for ejectors. 15

18 STOCKS & WOODWORK A custom fit stock is almost entirely hand made with only minimal pre-machining. Atypical stock dimensions and longer stock lengths generally require a custom fit stock. Further information on request. Wood upgrade Category 001 Category 002 Category 003 Category ,00 784, , ,00 CLASSIC Exclusive wood categories as stock blanks (hand-crafted) Due to the high cost of raw materials, wood grades higher than 004 require a hand made stock. Category C1 Category C2 Category C , , ,00 Right-handed stock (hand-crafted) Standard dimensions Special dimensions, made to customer s specifications Left-handed stock (hand-crafted) Left-handed stocks are always hand-crafted, to be able to offer all stock configurations also to left-handed shooters. Standard dimensions Special dimensions, made to customer s specifications Forearm (hand-crafted) Standard dimensions Special dimensions, made to customer s specifications, beavertail or semi-beavertail forearm Rubber recoil pad With leather cover; black or brown; 15, 20 or 25 mm; fitting included Stock magazine with hinged cover plate Ornamental line engraving borders receiver included. Other engravings upon request. 712, ,00 712, ,00 187,00 432,00 311, ,00 EXCLUSIVE OPTIONS Façon Exclusive The final shape and finish of the action body and furniture is individually created by the use of hand tools. Imperial design Extended top tang, extended steel trigger guard, steel pistol grip cap, engraved serial number into the trigger guard extension and Rigby-style cheekpiece. Hand-polished stock-finish Fine checkering instead of standard checkering 1 Skip checkering instead of standard checkering , ,00 918,00 135,00 91,00 1 Only available in conjunction with hand-crafted stock. 16

19 Full carving on grip and forearm 1 Full carving with leaf arabesques, English arabesques, enhanced English arabesques or oak leaves. Fish scale checkering instead of standard checkering on grip and forearm 1 Checkering with carved border on grip and forearm 1 Checkering surrounded by leaf arabesques, English arabesques, enhanced English arabesques or oak leaves. Ebony or rosewood endpiece on grip and forearm , , ,00 538,00 SURFACE FINISH Models featuring steel receivers in combination with steel base plates, can optionally be blued or nitrated. CLASSIC Blued surface finish Nitrated surface finish Complete nickel finish of all external parts PH-ProCoating (corrosion resistant Ilaflon-Coating for barrel and receiver) no extra charge 466,00 192,00 306,00 MONOGRAMS & LOCKS Monograms can be engraved into a separate steel plate, which is fitted into the pistol grip of the rear stock. Optionally, the monogram can be integrated into the trigger guard. Monogram plate, finished the same as the receiver Inletting into pistol grip cap Steel pistol grip cap 1 117,00 393,00 Monograms Two letters engraved Two letters engraved in relief style Two letters in silver Two letters in gold 217,00 313,00 515,00 707,00 Locks Internal lock parts nickel plated Internal lock parts gold plated, triggers not included Trigger gold plated (for guns with only one trigger or single trigger option) Double triggers gold plated 352,00 805,00 143,00 200,00 1 Only available in conjunction with hand-crafted stock. 17

20 KRIEGHOFF HUBERTUS Krieghoff Hubertus Single shot rifle shown with additional options Engraving: Fine English with roses & bouquet HUBERTUS Hubertus standard configuration: Set trigger integrated in the front trigger Universal Trigger System Combi-Cocking Device Steel trigger guard Front plate for pivot bridge mount Quick detachable sling swivels Nickel plated receiver finish Ornamental line engraving borders receiver Hinge screws, top latch, screws and pins are blued Standard wood Right-handed stock with Bavarian-style cheekpiece and Schnabel forearm Supplied in Krieghoff GunPack Hubertus single shot rifle Standard barrel length: 60 cm (24") or 55 cm (22") optionally; standard stock length: 37 cm (14.5") incl. 15 mm (0.6") rubber recoil pad in black. Standard calibre Action available in steel or duraluminium. Magnum calibre Action available in steel only , ,00 Hubertus single shot rifle with octagonal barrel Action available in steel or duraluminium; sling swivel base is milled directly onto the barrel ,00 CALIBRES AND GAUGES Rimless cartridges require the installation of a spring-loaded extractor claw. Extra cost regarding this feature can be found under category additional equipment. Hubertus single shot rifle Standard calibre:.222 Rem., Rem., 5.6x50R Mag., 5.6x52R,.243 Win. 1, 6x62R Frères 1,.270 Win., 6.5x57R, 6.5x65R, 7x57R, 7x65R,.308 Win. 1, ,.30R Blaser 1, 8x57IRS, 8x75RS, 9.3x74R Magnum calibre: 1 7mm Rem. Mag., 300 Win. Mag. Hubertus single shot rifle with octagonal barrel 6.5x57R, 6.5x65R, 7x57R, 7x65R,.308 Win. 1, ,.30R Blaser 1 Custom calibres and gauges Further calibres and gauges on request. from 1.174,00 1 For those calibres only steel action available. 18

21 ADDITIONAL EQUIPMENT Spring loaded extractor claws, per barrel For rimless cartridges Automatic set trigger release Different barrel length 55 cm (22") for Krieghoff Hubertus single shot rifle Krieghoff see through sight BreaKO recoil reducer Fitting included (weight: 350 g/12.3 oz, diameter: 22.5 mm, length: 100 mm) 163,00 117,00 no extra charge 292,00 209,00 ENGRAVINGS A display of our engraving motifs as well as custom engravings can be found on page 43. SCOPE MOUNTS HUBERTUS All models are equipped with a compact short rib for maximum strength and durability, and are prepared for the pivot bridge mount In our view the best and most aesthetically pleasing mount for this type of gun. Pivot bridge mount 742,00 INTERCHANGEABLE BARREL SETS Interchangeable barrel sets together with the complete forend wood assembly in standard grade wood. Barrel fitting, proof testing and sighting-in are included. Interchangeable barrel in standard calibre Interchangeable barrel in magnum calibre (steel action only) Interchangeable octagonal barrel in standard calibre Interchangeable shotgun barrel gauge 28/ , , , ,00 STOCKS & WOODWORK A custom fit stock is almost entirely hand made with only minimal pre-machining. Atypical stock dimensions and longer stock lengths generally require a custom fit stock. Further information on request. Wood upgrade Category 001 Category 002 Category 003 Category 004 Exclusive wood categories as stock blanks (hand-crafted) Due to the high cost of raw materials, wood grades higher than 004 require a hand made stock. Category C1 Category C2 Category C3 328,00 784, , , , , ,00 19

22 Right-handed stock (hand-crafted) Standard dimensions Special dimensions, made to customer s specifications Left-handed stock (hand-crafted) Left-handed stocks are always hand-crafted, to be able to offer all stock configurations also to left-handed shooters. Standard dimensions Special dimensions, made to customer s specifications Forearm (hand-crafted) Standard dimensions Special dimensions, made to customer s specifications, beavertail or semi-beavertail forearm Rubber recoil pad With leather cover; black or brown; 15, 20 or 25 mm; fitting included 712, ,00 712, ,00 187,00 432,00 311,00 HUBERTUS Stock magazine with hinged cover plate Ornamental line engraving borders receiver included. Other engravings upon request. EXCLUSIVE OPTIONS 1.014,00 Façon Exclusive The final shape and finish of the action body and furniture is individually created by the use of hand tools. Hand-polished stock-finish Fine checkering instead of standard checkering 1 Skip checkering instead of standard checkering 1 Full carving on grip and forearm 1 Full carving with leaf arabesques, English arabesques, enhanced English arabesques or oak leaves. Fish scale checkering instead of standard checkering on grip and forearm 1 Checkering with carved border on grip and forearm 1 Checkering surrounded by leaf arabesques, English arabesques, enhanced English arabesques or oak leaves. Ebony or rosewood endpiece on grip and forearm ,00 918,00 135,00 91, , , ,00 538,00 SURFACE FINISH Models featuring steel receivers in combination with steel base plates, can optionally be blued or nitrated. Blued surface finish Nitrated surface finish Complete nickel finish of all external parts PH-ProCoating (corrosion resistant Ilaflon-Coating for barrel and receiver) no extra charge 466,00 192,00 306,00 1 Only available in conjunction with hand-crafted stock. 20

23 MONOGRAMS & LOCKS Monograms can be engraved into a separate steel plate, which is fitted into the pistol grip of the rear stock. Optionally, the monogram can be integrated into the trigger guard. Monogram plate, finished the same as the receiver Inletting into pistol grip cap Steel pistol grip cap 1 Monograms Two letters engraved Two letters engraved in relief style Two letters in silver Two letters in gold 117,00 393,00 217,00 313,00 515,00 707,00 Locks Internal lock parts nickel plated Internal lock parts gold plated, triggers not included Trigger gold plated 352,00 805,00 143,00 HUBERTUS 1 Only available in conjunction with hand-crafted stock. 21

24 KRIEGHOFF SEMPRIO Semprio standard configuration: Krieghoff In-Line action Set trigger integrated Universal Trigger System Combi-Cocking Device Click-and-Go sling swivels Take down Prepared for pivot bridge mount (Krieghoff Pro Mount) Black anodized action finish Standard wood in oil finish Supplied in Semprio GunPack SEMPRIO Krieghoff Semprio In-Line repeater Models: black anodized finish Camouflage stock finish Blaze Orange (Fig. above) Thumb hole stock with Camouflage stock finish Forest Green (Fig. below) Semprio In-Line repeater in standard calibres Standard barrel length: 55 cm (22"); magazine capacity: 4+1; standard stock length 37 cm (14.5"), incl. 15 mm (0.6") black rubber recoil pad in black; right-handed stock with Semprio cheekpiece; Krieghoff see through sight with fluorescent beads ,00 Semprio In-Line repeater in magnum calibres Standard barrel length: 63 cm (25"); magazine capacity: 3+1; standard stock length 37 cm (14.5") incl. 15 mm (0.6") black rubber recoil pad in black; right-handed stock with Semprio cheekpiece; Krieghoff see through sight with fluorescent beads ,00 Krieghoff Semprio Big Five In-Line repeater shown with additional options Model: black anodized finish Semprio Big Five In-Line Repeater Standard barrel length: 55 cm (22"); magazine capacity: 3+1; standard stock length 37 cm (14.5") incl. traditional rubber recoil pad in red; Big Five stock with German style Safari cheek piece; PH-ProCoating (corrosion resistant Ilaflon-Coating for barrel and receiver); express sight with two folding blades; full banded Safari contour barrel provides stable base for brass bead front sight and front sling swivel; Holland & Holland folding sight ,00 22

25 CALIBRES AND GAUGES Semprio In-Line repeater in standard calibres Rifle calibres:.223 Rem.,.243 Win., 6.5x55 SE,.270 Win., 7x64,.308 Win.,.30 06, 8x57IS, 9.3x62 Semprio In-Line repeater in magnum calibres Rifle calibres: 7mm Rem. Mag.,.300 Win. Mag.,.375 Ruger 1 Semprio Big Five In-Line repeater 2 Rifle calibres:.458 Win. Mag. Custom calibres and gauges Further calibres and gauges on request. from 1.174,00 ADDITIONAL EQUIPMENT Semprio In-Line Repeater Nickel plated action frame Compact version with additional sling swivels on the side of forend and buttstock BreaKO recoil reducer Barrel porting (recoil and muzzle jump is reduced up to 35 %) Muzzle threading, depends on calibre (M14x1 or M15x1) 3 PH-ProCoating (corrosion resistant Ilaflon-Coating for barrel and receiver) Fluted barrel improves the temperature management of the barrel, incl. PH-ProCoating Semprio Big Five In-Line Repeater Nickel plated action frame BreaKO recoil reducer no extra charge 471,00 209,00 381,00 279,00 306,00 962,00 no extra charge 209,00 SEMPRIO AIMZONIC SILENCER Due to significant reduction in muzzle noise by up to 26 db, the noise hazard is significantly reduced for the hunter, thereby also reducing the sound and the noise pollution in the vicinity Front mounted models aimzonic Compact Max. calibre: 5.7 mm, 6.7 mm, 7.7 mm, 8.6 mm, 9.3 mm Threading: ½"x20 UNF, ½"x28 UNEF, M13x1, M14x1, M15x1, M18x1 328,00 aimzonic Predator Max. calibre: 5.7 mm, 6.7 mm, 7.7 mm, 8.6 mm, 9.5 mm Threading: ½"x20 UNF, ½"x28 UNEF, M13x1, M14x1, M15x1, M18x1 360,00 Over barrel models aimzonic Cyclone Compact Max. calibre: 5.7 mm, 6.7 mm, 7.7 mm, 8.6 mm, 9.3 mm Threading: ½"x20 UNF, ½"x28 UNEF, M13x1, M14x1, M15x1, M18x1 404,00 1 Only available in standard barrel length 55 cm (22") Ruger and.416 Ruger on request. 3 Please find the extra charge for the thread cover bushing on page

26 aimzonic Cyclone Predator Max. calibre: 5.7 mm, 6.7 mm, 7.7 mm, 8.6 mm, 9.5 mm Threading: ½"x20 UNF, ½"x28 UNEF, M13x1, M14x1, M15x1, M18x1 437,00 aimzonic Triton 42 Max. calibre: 5.7 mm, 6.7 mm, 7.7 mm, 8.6 mm, 9.5 mm Threading: ½"x20 UNF, ½"x28 UNEF, M13x1, M14x1, M15x1, M18x1 404,00 aimzonic Triton 50 Max. calibre: 5.7 mm, 6.7 mm, 7.7 mm, 8.6 mm, 9.5 mm Threading: ½"x20 UNF, ½"x28 UNEF, M13x1, M14x1, M15x1, M18x1 437,00 Additional equipment aimzonic thread cover bushing Threading: ½"x20 UNF, ½"x28 UNEF, M13x1, M14x1, M15x1, M18x1 Krieghoff thread cover bushing Individual fitted to the outer contour of the barrel Threading: M14x1, M15x1 33,00 111,00 SEMPRIO ENGRAVINGS A display of our engraving motifs as well as custom engravings can be found on page 43. SCOPE MOUNTS Fitting and sighting-in is already included. Krieghoff Semprio ProMount Tip-off mounts for scopes with rail Tip-off mounts for scopes without rail (ring mount) Tip-off mounts for red dot sight 642,00 688,00 724,00 INTERCHANGEABLE BARRELS & ACCESSORIES Interchangeable barrels As a complete assembly, including wood forearm, magazine frame, but without magazine and bolt head. Interchangeable barrel for standard calibre Interchangeable barrel for magnum calibre Extra magazines Calibre group 1:.270 Win.,.30 06, 7x64, 8x57JS, 6.5x55 SE Calibre group 2:.308 Win.,.243 Win. Calibre group 3: 9.3x62 Calibre group 4:.300 Win. Mag., 7mm Rem. Mag.,.375 Ruger,.416 Ruger 1,.458 Win. Mag. Calibre group 5:.223 Rem , ,00 86,00 86,00 86,00 86,00 86,00 1 Only available for the US market. 24

27 Bolt heads Standard calibre, for calibre groups 1, 2 and 3 Magnum calibre, for calibre group 4 Small calibre, for calibre group 5 196,00 196,00 196,00 STOCKS & WOODWORK A custom fit stock is almost entirely hand made with only minimal pre-machining. Atypical stock dimensions and longer stock lengths generally require a custom fit stock. Further information on request. Stock Oil finish; straight comb; stock length 37 cm (14.5") which already includes the standard 15 mm (0.6") black rubber recoil pad. Standard wood grade or T-Wood optionally, alternative camouflage finish in Blaze Orange or Forest Green. Stock without cheekpiece Right-handed stock with Semprio cheekpiece Left-handed stock with Semprio cheekpiece Thumb hole stock 1 Oil finish; straight comb; stock length 37 cm (14.5") which already includes the standard 15 mm (0.6") black rubber recoil pad; wood category ; alternative camouflage finish in Blaze Orange or Forest Green. Thumb hole stock with Semprio cheekpiece, right-handed Thumb hole stock with Semprio cheekpiece, left-handed no extra charge no extra charge 228,00 456,00 456,00 Manual made stocks Stock hand-crafted Forearm hand-crafted 1.037,00 432,00 SEMPRIO Alternative stock finish 1 T-Wood (walnut wood optically improved) 3 Camouflage finish in Blaze Orange or Forest Green Wood upgrade Category 001 Category 002 Category 003 Category 004 Exclusive wood categories as stock blanks 4 Due to the high cost of raw materials, wood grades higher than 004 require a hand made stock. Category C1 Category C2 Category C3 Monogram plate, finished the same as the receiver Inletting into pistol grip cap Steel pistol grip cap 4 no extra charge no extra charge 328,00 784, , , , , ,00 117,00 393,00 1 Except for Semprio Big Five. 2 Only wood category 001 available other categories on request. 3 Not available for hand-crafted stock. 4 Only available in conjunction with hand-crafted stock. 25

28 KRIEGHOFF TRUMPF Krieghoff Trumpf Double rifle drilling shown with additional options and Ornamental line engraving borders receiver Trumpf standard configuration: Classic three lock drilling Separate manual cocking device for rifle barrel Set trigger integrated in the front trigger Universal Trigger System Steel trigger guard Front plate for pivot bridge mount Steel shot proofed depending on choke size and material of the receiver Quick detachable sling swivels Nickel plated receiver finish Ornamental line engraving borders receiver Hinge screws, top latch, screws and pins are blued Standard wood Right-handed stock with Bavarian-style cheekpiece and Schnabel forearm Supplied in Krieghoff GunPack Trumpf 12 and 20 drilling thermo stable Action available in steel or duraluminium; standard barrel length: 55 cm (22"); standard stock length: 37 cm (14.5") incl. 15 mm (0.6") rubber recoil pad in black ,00 TRUMPF Trumpf 20 double rifle drilling Steel receiver; standard barrel length: 55 cm (22"); standard stock length: 37 cm (14.5") incl. 15 mm (0.6") rubber recoil pad in black. Trumpf 12 and 20 drilling traditionally soldered Action available in steel or duraluminium; standard barrel length: 60 cm (24"); standard stock length: 37 cm (14.5") incl. 15 mm (0.6") rubber recoil pad in black , ,00 CALIBRES AND GAUGES Rimless cartridges require the installation of a spring-loaded extractor claw. Extra cost regarding this feature can be found under category additional equipment. Trumpf 12 and 20 drilling thermo stable and drilling traditionally soldered Rifle calibres: 6.5x57R, 6.5x65R, 7x57R, 7x65R,.308 Win.,.30 06,.30R Blaser, 8x57IRS, 8x75RS, 9.3x74R Shotgun calibres: 12/70, 12/76 (steel action only), 20/76 Choke: 1/2 3/4 Trumpf 20 double rifle drilling Rifle calibres: 7x57R, 7x65R,.308 Win.,.30 06,.30R Blaser, 8x57IRS, 8x75RS, 9.3x74R Shotgun calibres: 20/76 Choke: 3/4 Custom calibres and gauges Further calibres and gauges on request ,00 26

29 ADDITIONAL EQUIPMENT Spring loaded extractor claws, per barrel For rimless cartridges Second set trigger installed in the rear trigger Different barrel length 60 cm (24") for thermo stable model Trumpf drilling 55 cm (22") for traditionally soldered model Trumpf drilling Cosmetic sideribs for models thermo stable The cosmetic siderib (available in different heights) is generally fitted after the rifle is sighted-in. For aesthetic, optical reasons, we strongly recommend that the scope mounting and sighting-in process is carried out at the factory. Not available for Trumpf 12 featuring 60 cm (24") barrel length. Krieghoff see through sight For Trumpf double rifle drilling 2-way flip sight For Trumpf drilling. Wide U-shaped middle sight for shotshell and slug use. Fine U-shaped sight for rifle use. BreaKO recoil reducer Fitting included (weight: 350 g/12.3 oz, diameter: 22.5 mm, length: 100 mm) 163,00 526,00 526,00 526,00 331,00 292,00 95,00 209,00 Shotgun barrels sighted-in with slugs according to Langenhagener Norm : 1 Models thermo stable: One barrel on Trumpf 12 and 20 thermo stable Both barrels on Trumpf 12 and 20 thermo stable Traditional soldered models: One barrel on Trumpf drilling, double rifle drilling Both barrels on Trumpf drilling ENGRAVINGS 158,00 368,00 313,00 626,00 TRUMPF A display of our engraving motifs as well as custom engravings can be found on page 43. SCOPE MOUNTS All models are equipped with a compact short rib for maximum strength and durability, and are prepared for the pivot bridge mount In our view the best and most aesthetically pleasing mount for this type of gun. Trumpf 12 and 20 drilling thermo stable Pivot bridge mount Trumpf 20 double rifle drilling Pivot bridge mount Tip-off mount for red dot sight 787, ,00 724,00 1 Please pay attention to the instructions about scope mounts on page

30 INTERCHANGEABLE BARREL SETS Interchangeable barrel sets together with the complete forend wood assembly in standard grade wood. Barrel fitting, proof testing and sighting-in are included. Interchangeable drilling barrel, thermo stable 1 Interchangeable double rifle barrel, traditionally soldered (only Trumpf 20) Interchangeable drilling barrel, traditionally soldered 3.725, , ,00 FLUSH FITTING BRILEY CHOKE INSTALLATION Flush at the barrel muzzle. Available in 12 and 20 gauge in the following constrictions: Cylinder (Cyl), Skeet (Sk), 1/4 (IC), 1/4 1/2 (LM), 1/2 (M), 3/4 (IM), 3/4 1/1 (LF), 1/1 (F), Super-1/1 (XF) Fitting of chokes, per barrel Briley screw-in choke, suitable for lead or steel shot Choke wrench Speed wrench for quick choke changes Special grease for choke Container for three chokes Container for five chokes 137,00 93,00 34,00 116,00 29,00 20,00 21,00 STOCKS & WOODWORK A custom fit stock is almost entirely hand made with only minimal pre-machining. Atypical stock dimensions and longer stock lengths generally require a custom fit stock. Further information on request. TRUMPF Wood upgrade Category 001 Category 002 Category 003 Category ,00 784, , ,00 Exclusive wood categories as stock blanks (hand-crafted) Due to the high cost of raw materials, wood grades higher than 004 require a hand made stock. Category C1 Category C2 Category C3 Right-handed stock (hand-crafted) Standard dimensions Special dimensions, made to customer s specifications Left-handed stock (hand-crafted) Left-handed stocks are always hand-crafted, to be able to offer all stock configurations also to left-handed shooters. Standard dimensions Special dimensions, made to customer s specifications 2.971, , ,00 712, ,00 712, ,00 1 The gauge of the interchangeable barrel has to be the same as the gauge of the original barrel. 28

31 Forearm (hand-crafted) Standard dimensions Special dimensions, made to customer s specifications, beavertail or semi-beavertail forearm Rubber recoil pad With leather cover; black or brown; 15, 20 or 25 mm; fitting included Stock magazine with hinged cover plate Ornamental line engraving borders receiver included. Other engravings upon request. 187,00 432,00 311, ,00 EXCLUSIVE OPTIONS Façon Exclusive The final shape and finish of the action body and furniture is individually created by the use of hand tools. Hand-polished stock-finish Fine checkering instead of standard checkering 1 Skip checkering instead of standard checkering 1 Full carving on grip and forearm 1 Full carving with leaf arabesques, English arabesques, enhanced English arabesques or oak leaves. Fish scale checkering instead of standard checkering on grip and forearm ,00 918,00 135,00 91, , ,00 Checkering with carved border on grip and forearm 1 Checkering surrounded by leaf arabesques, English arabesques, enhanced English arabesques or oak leaves. Ebony or rosewood endpiece on grip and forearm ,00 538,00 TRUMPF SURFACE FINISH Models featuring steel receivers in combination with steel base plates, can optionally be blued or nitrated. Blued surface finish Nitrated surface finish Complete nickel finish of all external parts PH-ProCoating (corrosion resistant Ilaflon-Coating for barrel and receiver) no extra charge 466,00 192,00 306,00 MONOGRAMS & LOCKS Monograms can be engraved into a separate steel plate, which is fitted into the pistol grip of the rear stock. Optionally, the monogram can be integrated into the trigger guard. Monogram plate, finished the same as the receiver Inletting into pistol grip cap Steel pistol grip cap 1 117,00 393,00 1 Only available in conjunction with hand-crafted stock. 29

32 Monograms Two letters engraved Two letters engraved in relief style Two letters in silver Two letters in gold Locks Internal lock parts nickel plated Internal lock parts gold plated, triggers not included Trigger gold plated (for guns with only one trigger) Double triggers gold plated 217,00 313,00 515,00 707,00 352,00 805,00 143,00 200,00 KRIEGHOFF INSERT BARREL KS 1 The insert barrel KS can be sighted-in without removing it from the carrier barrel as adjustment is done at the muzzle of the insert barrel. The listed prices include fitting, proof testing and sighting-in. Drillings featuring light weight receivers, made from Duraluminium can only be equipped with.22 Hornet and 6x70R calibres and only if the lock up of the gun is in good condition. Gauge Hornet,.222 Rem., 5.6x50R Mag., 5.6x52R Savage, 6x70R, 6.5x57R, 7x57R, 7x65R,.30R Blaser, 8x57IRS, 8x75RS.308 Win.,.30 06, 9.3x74R Gauge Hornet,.222 Rem., 5.6x50R Mag., 5.6x52R Savage, 6x70R 6.5x57R, 7x57R, 7x65R,.30R Blaser, 8x57IRS, 8x75RS.308 Win.,.30 06, 9.3x74R EL 22 and EL , , , , ,00 price on request TRUMPF 1 The Krieghoff Insert Barrel KS is not suitable for barrels equipped with Briley chokes. 30

33 KRIEGHOFF K-80, K-20 AND KX-6 KRIEGHOFF K-80 WITH FIXED CHOKES K-80 standard configuration with fixed chokes: Nickel plated steel action Hinge screws, top latch, screws and pins are blued Selectable, mechanical single trigger Length adjustable trigger blade Light scroll engraving pattern Adjustable comb Standard wood Stock finish: epoxy Supplied in a gun case Please find optional Briley screw-in chokes can be found under category Service on page 55. K-80 Sporting shown with additional options and custom engraving K-80 Sporting Trap Skeet Barrel length: 76 (30") or 81 cm (32"); free-floated barrel set; various stocks for Sporting/International Skeet or Trap, featuring Monte Carlo or straight style; forearm styles can be individually selected ,00 K-80 Parcours shown with additional options and custom engraving K-80 Parcours Barrel length: 71 1 (28"), 76 (30") or 81 cm (32"); full length soldered barrel set; Parcours stock, right-handed; fixed comb; Parcours forearm ,00 SPORT Optionally available with non-adjustable comb and oil finish. 1 Only available with Briley chokes. 31

34 KRIEGHOFF K-80 WITH SCREW-IN CHOKES K-80 standard configuration with screw-in chokes: Free-floated barrel set Extended factory screw-in chokes, incl. five steel choke tubes and choke wrench Nickel plated steel action Hinge screws, top latch, screws and pins are blued Selectable, mechanical single trigger Length adjustable trigger blade Light scroll engraving pattern Adjustable comb Standard wood Stock finish: epoxy Supplied in a gun case K-80 Trap shown with additional options and engraving option Super Scroll K-80 Trap Barrel length: 76 (30") or 81 cm (32"); soldered rib: 12 mm taper step; Monte Carlo style Trap stock with Trap forearm ,00 K-80 ProTrap shown with additional options and engraving option Heritage Game I SPORT K-80 ProTrap Barrel length: 76 (30") or 81 cm (32"); adjustable rib: 10 mm tapered (12 mm with chamfer); highest selectable shot pattern: 70/30; ProTrap stock with Trap forearm ,00 K-80 Trap Special shown with additional options and adjustable butt plate as well as engraving option Vintage Scroll K-80 Trap Special Barrel length: 76 (30") or 81 cm (32"); adjustable rib: Trap Special 10 mm tapered (12 mm with chamfer); highest selectable shot pattern: 100 % (optionally Pro rib featuring 120 % high pattern); Trap Special Rollover right-handed stock with Trap forearm ,00 32

35 K-80 Double Trap Special shown with additional options and blued engraving option Gold Standard K-80 Double Trap Special Barrel length: 76 (30") or 81 cm (32"); adjustable rib: Double Trap Special 10 mm tapered (12 mm with chamfer); highest selectable shot pattern: 100 %; Trap Special right-handed stock, including an additional higher comb in black (see picture above); Trap forearm ,00 K-80 Sporting shown with additional options and custom engraving K-80 Sporting Barrel length: 71 (28"), 76 (30") or 81 cm (32"); soldered rib: 10 mm taper flat; Sporting stock with Schnabel forearm ,00 SPORT K-80 ProSporter shown with additional options and engraving option Renaissance K-80 ProSporter Barrel length: 76 (30") or 81 cm (32"); adjustable rib: 10 mm tapered (12 mm with chamfer); Pro Sporter stock with Schnabel forearm stock ,00 33

36 KRIEGHOFF K-20 K-20 standard configuration: Free-floated barrel set Extended factory screw-in chokes, incl. five steel choke tubes and choke wrench Nickel plated steel action Hinge screws, top latch, screws and pins are blued Selectable, mechanical single trigger Length adjustable trigger blade Light scroll engraving pattern Standard wood Stock finish: epoxy Supplied in a gun case K-20 Sporting and Hunting Gun shown with additional options and engraving option Parcours Special K-20 Sporting and Hunting Gun Barrel length: 76 (30") or 81 cm (32"); soldered rib: 10 mm taper flat, soldered; non-adjustable Sporting stock with Schnabel forearm ,00 K-20 ProSporter shown with additional options and custom engraving K-20 ProSporter Barrel length: 76 (30") and 81 cm (32"); 10 mm tapered (12 mm with chamfer); adjustable ProSporter right-handed stock with Schnabel forearm ,00 SPORT KRIEGHOFF KX-6 KX-6 standard configuration: Black nitro carbonized action finish Extended factory screw-in chokes, incl. three choke tubes and choke wrench; Length adjustable trigger blade T-Wood (walnut wood optically improved) Supplied in a gun case KX-6 Single Barrel Shotgun in standard configuration KX-6 Single barrel shotgun Barrel length: 86 cm (34"); adjustable rib 12 mm taper flat; right-handed Monte Carlo Trap stock with adjustable comb and Trap forearm ,00 34

37 STANDARD GAUGES K-80 12/76 (3"), 20/76 (3"), 28/76 (3"), chambers are chrome plated.410/76 (3"), chambers are not chrome plated K-20 20/76 (3"), 28/76 (3"), chambers are chrome plated.410/76 (3"), chambers are not chrome plated KX-6 12/76 (3"), chambers are chrome plated ADDITIONAL EQUIPMENT Krieghoff Balance System Barrel weight for K-80, gauge 12, per item The barrel could be provided with up to three additional 40g weights underneath the forend, thus making an increase of 120 g at the front end possible. Stock weight for K-80 The buttstock can be equipped with a special stock bolt, which is 40 g heavier than a standard stock bolt, and can accept up to three additional 30 g weights. Thus, making buttstock up to 130 g heavier. Price for stock screw including on extra weight Price for further extra weights, per item Adjustable butt plate For K-80 and KX-6 Length of pull adjustment option For K-80 and KX-6 Length of pull can be easily adjusted with the addition of optional pre-fitted 6.4 mm (1/4") spacers. Only in conjunction with adjustable butt plate. Price per item. Barrel porting For gauge 12 recoil and muzzle jump is reduced. Price per barrel. Matched Pair arms Upcharge of 10% with any order of a matching pair. 86,00 106,00 46,00 518,00 24,00 269,00 +10% ENGRAVINGS SPORT A display of our engraving motifs as well as custom engravings can be found on page 43. SURFACE FINISH Blued action and forend iron, including all external metal parts Complete nickel finish of all external metal parts Nitrate surface treatment of action and forend iron, including all external metal parts no extra charge 127,00 458,00 35

38 INTERCHANGEABLE BARRELS Please find a table of the interchangeable barrel options on page 39. Standard version without forearm. Interchangeable barrel K-80 with fixed chokes K-80 Sporting/Skeet Free-floated barrel set; barrel length: 76 (30") or 81 cm (32") K-80 Trap Free-floated barrel set; barrel length: 76 (30") or 81 cm (32") K-80 Parcours Full length soldered barrel set; barrel length: 71 1 (28"), 76 (30") or 81 cm (32") Forend hanger for adapting free-floated barrel sets optional available K-80 Trap Special/ProSporter/ProTrap Interchangeable barrel K-80 with screw-in chokes Free-floated barrel set; extended factory screw-in chokes, including two choke tubes and choke wrench K-80 Trap Rib: 12 mm taper step, soldered; barrel length: 76 (30") or 81 cm (32") K-80 ProTrap Rib: 10 mm taper flat, adjustable; barrel length: 76 (30") or 81 cm (32") K-80 Trap Special Rib: Trap Special 10 mm taper flat, adjustable; highest selectable shot pattern: 100 % (alternative Pro rib with 120 % high pattern); barrel length: 76 (30") or 81 cm (32") K-80 Double Trap Special 2 Rib: Double Trap Special 10 mm taper flat, adjustable; barrel length: 76 (30") or 81 cm (32") K-80 Sporting/Skeet Gauge: 12/76, 20/76 3, 28/76 3,.410/76 3 ; Rib: 10 mm taper flat, soldered; barrel length: 71 (28"), 76 (30") or 81 cm (32") K-80 ProSporter Gauge: 12/76, 20/76, 28/76,.410/76; Rib: 10 mm taper flat, adjustable; barrel length: 76 (30") or 81 cm (32") K-80 Unsingle/Topsingle Rib: 12 mm taper step, adjustable; barrel length: 86 cm (34") 3.643, , ,00 price on request 4.158, , , , , , ,00 SPORT Interchangeable barrel K-20 with screw-in chokes Free-floated barrel set; extended factory screw-in chokes, including two choke tubes and choke wrench K-20 Sporting Gauge: 20/76, 28/76,.410/76; Rib: 10 mm taper flat, soldered; barrel length: 71 (28"), 76 (30") or 81 cm (32") K-20 ProSporter Gauge: 20/76, 28/76,.410/76; Rib: 10 mm taper flat, adjustable; barrel length: 76 (30") or 81 cm (32") 4.158, ,00 CHOKE TUBES Factory screw-in chokes, 12, 20, 28 and.410 gauge It is not possible to retrofit factory choke tubes to fixed choke barrels. See Briley option below. Available in the following constrictions: Cylinder (00), Skeet (0), 1/4 (1), 1/4 1/2 (1+), 1/2 (2), 1/2 3/4 (2+), 3/4 (3), 1/1 (4), Super-1/1 (5). Super full choke tubes only available for 12 gauge. 95,00 1 Only available with Briley chokes. 2 When using this barrel you may need a higher comb. Price on request cm (28") barrel length on request. 36

39 Flush fitted screw-in chokes by Briley, 12 and 20 gauge Subsequent fitting of Briley chokes possible for shotgun barrels with fixed chokes, also for barrels from other brands. Technical requirements will be checked carefully by our master gunsmiths before fitting. Price per barrel. Briley screw-in chokes Available in the following constrictions: Cylinder (00), Skeet (0), 1/4 (1), 1/4 1/2 (1+), 1/2 (2), 3/4 (3), 3/4 1/1 (LF), 1/1 (4), Super-1/1 (XF) One inch extended, non-ported Briley choke tubes are available on request. Titanium screw-in chokes, 12 and 20 gauge For all guns featuring factory screw-in chokes. Available in the following constrictions: Cylinder (00), Skeet (0), 1/4 (1), 1/4 1/2 (1+), 1/2 (2), 1/2 3/4 (2+), 3/4 (3), 1/1 (4), Super-1/1 (5) Titanium screw-in chokest Titanium screw-in chokes in gold Accessories Choke wrench Speed wrench for quick choke changes (12 and 20 gauge) Special grease for chokes Container for three chokes Container for five chokes 137,00 93,00 153,00 204,00 34,00 116,00 29,00 20,00 21,00 TITANIUM OPTIONS Upcharge for titanium option instead of the standard configuration made of steel. Titanium options Titanium trigger (including trigger group) Titanium front hanger Five titanium screw-in chokes of the standard configuration Titanium options in gold Titanium trigger (including trigger group), in gold Titanium front hanger, in gold Five titanium screw-in chokes of the standard configuration, in gold 106,00 51,00 297,00 269,00 150,00 548,00 STOCKS & WOODWORK A custom fit stock is almost entirely hand made with only minimal pre-machining. Atypical stock dimensions and longer stock lengths generally require a custom fit stock. Further information on request. SPORT Wood Upgrade Category 001 Category 002 Category 003 Category 004 Exclusive wood categories as stock blanks (hand-crafted) Due to the high cost of raw materials, wood grades higher than 004 require a hand made stock. Category C1 Category C2 Category C3 437,00 988, , , , , ,00 37

40 Stock in oil or epoxy finish 1 Standard dimensions Special dimensions, made to customer s specifications Special dimensions, custom made stock with ergonomic grip and finger grooves Stock with adjustable comb and oil or epoxy finish 1 Standard dimensions Special dimensions, made to customer s specifications Special dimensions, custom made stock with ergonomic grip and finger grooves Forearm in oil or epoxy finish 1 Standard dimensions Special dimensions, made to customer s specifications Interchangeable stocks with adjustable comb and epoxy finish Trap Monte Carlo, ProTrap oder International Skeet/Sporting stock, model K-80 ProSporter stock, model K-80 or K-20 Trap Special Rollover stock, model K-80 Interchangeable stocks with non-adjustable comb and epoxy finish Sporting and Hunting Gun, model K-80 or K-20 Interchangeable forearm (forend iron not included) in oil or epoxy finish Trap or Skeet, model K-80 Schnabel forearm, model K-80 or K-20 Parcours forearm, model K-80 Additional charge for left-handed stocks K-80 Sporting, Parcours, ProSporter, Trap Special and Double Trap Special K-20 ProSporter KX-6 712, , , , , ,00 187,00 432, , , , ,00 194,00 194,00 194,00 329,00 329,00 329,00 MONOGRAMS & LOCKS Monograms can be engraved into a separate steel plate, which is fitted into the pistol grip of the rear stock. Optionally, the monogram can be integrated into the top latch or the trigger guard. SPORT Monogram plate, finished the same as the receiver 1 Inletting into pistol grip cap Steel pistol grip cap Monograms Two letters engraved Two letters engraved in relief style Two letters in silver Two letters in gold 134,00 390,00 246,00 355,00 580,00 794,00 Locks Internal lock parts nickel plated Internal lock parts gold plated, trigger not included Trigger gold plated (including trigger group) Titanium trigger (including trigger group), in gold 403,00 910,00 163,00 269,00 1 Only available in conjunction with hand-crafted stock. 38

41 THE K-80 MATRIX CALIBRE 12 CALIBRE 20 CALIBRE 28 CALIBRE.410 RIB CHOKE-TYP Barrel length Barrel length Barrel length Barrel length Width in mm Fixed chokes Screw-in chokes 71 cm 28" 76 cm 30" 81 cm 32" 71 cm 28" 76 cm 30" 81 cm 32" 71 cm 28" 76 cm 30" 81 cm 32" 71 cm 28" 76 cm 30" 81 cm 32" /2 3/4 MOD-IMOD 3/4 4/4 IMOD-FULL Sk Sk Skeet opening Krieghoff Steel Krieghoff Titanium 1 Briley ThinWall 1 Sporting/Skeet ProSporter 3 Trap 2 ProTrap 3 Trap Special 3 Double Trap Special 3 Sporting Parcours 4 Trap 2 Skeet Standardv version (no extra charge) Optional Not available Only available in calibre 12 and 20 Tapered step rib 12 8 mm tapered rib with chamfer Only available with Briley chokes Other barrel and rib models on request. SPORT FIXED CHOKES SCREW-IN CHOKES 39

42 KRIEGHOFF ESSENCIA Essencia side-by-side shotgun standard configuration: Round-bodied steel receiver Color case-hardened finish Sidelocks Choice of straight-grip or Prince-of-Wales Purdey-style third fastener pistol grip stock Double barrel-hook lock-up Wood category 003 Ejectors Traditional Tru-Oil finish Fine English scroll engraving with gold accented inlays Supplied in an exclusive leather hard case Krieghoff Essencia Sidelock side-by-side shotgun Essencia 12 side-by-side shotgun Gauge: 12/70; Barrel length: 71 cm (28"), 76 cm (30") ,00 Essencia 20 side-by-side shotgun Gauge: 20/76; barrel length: 68 cm (27"), 71 cm (28"), 76 cm (30") Gauge: 16/70; barrel length: 71 cm (28") Gauge: 16/70; barrel length: 76 cm (30") Gauge: 28/76; barrel length: 71 cm (28"), 76 cm (30") , , , ,00 Essencia 28 side-by-side shotgun Gauge: 28/76; barrel length: 71 cm (28"), 76 cm (30") Gauge:.410/76; barrel length: 71 cm (28") , ,00 ADDITIONAL EQUIPMENT Nitrated surface finish Optional single trigger no extra charge 1.291,00 ESSENCIA Interchangeable barrels for 20 gauge frame 20 gauge barrel; without forearm 16 gauge barrel; barrel length: 71 cm (28") including forearm 16 gauge barrel; barrel length: 76 cm (30") including forearm 28 gauge barrel; with forearm Interchangeable barrels for 28 gauge frame 28 gauge barrel; without forearm.410/76 gauge barrel; barrel length: 71 cm (28") including forearm 9.852, , , , , ,00 Matched Pair arms Upcharge of 10% with any order of a matching pair. +10% 40

43 Essencia side-by-side shotgun standard configuration: Round-bodied steel receiver Fine English scroll engraving with gold Sidelocks accented inlays Double barrel-hook lock-up Stock with cheeckpiece Barrel length: 60 cm (24") Wood category 003 Octagonal barrel Traditional Tru-Oil finish Color case-hardened finish Supplied in an exclusive leather hard case Krieghoff Essencia Sidelock single shot rifle Essencia single shot rifle ,00 CALIBRES AND GAUGES Available in the following constrictions:.243 Win., 6.5x57R, 6.5x65R,.270 Win., 7x57R, 7x65R,.308 Win.,.30 06,.30R Blaser, 8x57IRS, 8x75RS, 9.3x74R ADDITIONAL EQUIPMENT Nitrated surface finish Ejector Fluted octagonal barrel Full length stock ( Stutzen ) Interchangeable barrel without forearm no extra charge 4.815, , , ,00 Matched Pair arms Upcharge of 10% with any order of a matching pair. +10% ESSENCIA 41

44 Essencia side-by-side Big Five double rifle standard configuration: Round-bodied steel receiver Fine English scroll engraving with gold Sidelocks accented inlays Double barrel-hook lock-up Color case-hardened finish Barrel length: 63.5 cm (25") Traditional style Express stock with Purdey-style third fastener cheekpiece and pistol grip Double trigger Wood category 003 Manual safety Traditional Tru-Oil finish Automatic Holland & Holland style ejector Supplied in an exclusive leather hard case Krieghoff Essencia Sidelock Big Five double rifle Essencia Big Five double rifle ,00 CALIBRES AND GAUGES Available in the following constrictions:.450/.400 N.E.,.500/.416 N.E.,.470 N.E.,.500 N.E. ADDITIONAL EQUIPMENT Nitrated surface finish Interchangeable barrel with forearm Matched Pair arms Upcharge of 10% with any order of a matching pair. no extra charge ,00 +10% ESSENCIA 42

45 ENGRAVING OPTIONS The engraving patterns listed below are just a small sampling of the wood categories and engraving combinations most frequently requested. In line with our philosophy of quality, all our engravings are worked into the material of the action itself and never on attached plates. The wood grade and surface finish of the metal parts can be chosen freely. Together with the engraving patterns listed below, we just give you a recommendation of a certain wood grade in combination with a specific metal part surface treatment, which compliments the appearance of the gun. The corresponding extra cost for wood upgrades and metal part treatments, you will find under category stocks & woodwork and surface finish. HUNTING GUNS ENGRAVING OPTIONS Standard Ornamental line engraving borders receiver. Receiver nickel plated. Top lever, trigger guard, hinge pin and forearm latch blued. no extra charge Small arabesques Hand engraved arabesque pattern on both sides. Receiver nickel plated. Top lever, trigger guard, hinge pin and forearm latch blued. 564,00 Safari Scroll Full covering ornamental engraving. Receiver nickel plated. We recommend wood category ,00 Small game scene with leaf arabesques Detailed game scene surrounded by leaf arabesque engraving. Motif for the game engraving each side can be chosen freely. Receiver nickel plated. Top lever, trigger guard, hinge pin and forearm latch blued. We recommend wood category ,00 ENGRAVINGS 43

46 Big Game Detailed game scene African Game. Motif for the game engraving each side can be chosen freely. We recommend wood category 002 combined with a nickeled finish of all external metal parts ,00 Small game scene with oak leaves Detailed game scene surrounded by oak leaf engraving. Motif for the game engraving each side can be chosen freely. We recommend wood category 002 combined with a nickeled finish of all external metal part 1.224,00 Large game scene with leaf arabesques Elaborate engraving featuring two animals surrounded by leaf arabesques, as well as an engraved trigger guard. Scenes for the game engravings can be chosen freely. We recommend wood category 002 combined with a nickeled finish of all external metal parts ,00 Large game scene with oak leaves Elaborate engraving featuring two animals surrounded by oak leaves, as well as an engraved trigger guard. Scenes for the game engravings can be chosen freely. We recommend wood category 003 combined with a nickeled finish of all external metal parts ,00 ENGRAVINGS Full oak leaves Luxurious, overall covering featuring deep engraved oak leaves each side, as well as an engraved trigger guard. We recommend wood category 003 combined with a nickeled finish of all external metal parts ,00 Fine English with roses & bouquet Comprehensive overall covering featuring fine English arabesques with rose & bouquet, as well as an engraved trigger guard. We recommend wood category 003 combined with a nickeled finish of all external metal parts ,00 44

47 HUNTING GUNS ENGRAVING OPTIONS WITH SIDE PLATES The necessary side plates 1 for S -style engraving patterns are included in the price shown. Small English scroll Modest arabesque engraving per side, as well as on the trigger guard. We recommend wood category 002 combined with a nickeled finish of all external metal parts ,00 Small game scene with leaf arabesques Medallion of one deep engraved animal per side, surrounded by distinctive leave arabesques in combination with an engraved trigger guard. Scenes for the game engravings each side can be chosen freely. We recommend wood category 003 combined with a nickeled finish of all external metal parts ,00 Large game scene with leaf arabesques Elaborate engraving featuring three animals surrounded by leaf arabesques each side, in combination with an engraved trigger guard. Scenes for the game engravings can be chosen freely. We recommend wood category 003 combined with a nickeled finish of all external metal parts ,00 Large game scene with English arabesques Elaborate engraving featuring three animals surrounded by English arabesques each side, in combination with an engraved trigger guard. Scenes for the game engravings can be chosen freely. We recommend wood category 003 combined with a nickeled finish of all external metal parts ,00 Imperial Fine English arabesques in medallion-style, featuring Krieghoff lettering as a banderole. We recommend wood category 004 combined with nitrate receiver finish ,00 Gold Imperial Same design including golden Krieghoff lettering as a banderole ,00 Large game scene with oak leaves Elaborate engraving featuring three animals surrounded by oak leaves each side, in combination with an engraved trigger guard. Scenes for the game engravings can be chosen freely. We recommend wood category 004 combined with a nickeled finish of all external metal parts ,00 ENGRAVINGS 1 Steel receiver only 45

48 SEMPRIO ENGRAVING OPTIONS Standard black Black anodized action finish without engraving. We recommend standard wood category. no extra charge Standard nickel finish Nickel plated action finish without engraving. We recommend standard wood category. no extra charge Small arabesques Finely engraved arabesques on both sides combined with a nickel finish. We recommend wood category ,00 Large game scene with leaf arabesques Elaborate engraving featuring two animals each side surrounded by leaf arabesques, as well as an engraved trigger guard. Motifs: red deer and wild boars. Nickel plated action finish. We recommend wood category ,00 Interchangeable action frame Action frame in standard, featuring nickel plated or black anodized action finish Action frame with small arabesque engraving, combined with a nickel finish Action frame with large game scene with leaf arabesques engraving, combined with a nickel finish 210,00 438,00 781,00 ENGRAVINGS 46

49 COMPETITION SHOTGUNS ENGRAVING OPTIONS Standard Light scroll engraving pattern. Nickel finish top latch, screws and pins are blued. We recommend standard wood category. no extra charge Vintage Scroll Modest ornamental engraving with nickel finish. Optional finishes include nitride or blued. We recommend wood category ,00 Vintage Game I Modest ornamental engraving featuring wildfowl scenes with two motifs per side. We recommend wood category 003 combined with nitrate receiver finish. 434,00 Celtic Spacious Celtic ornament. We recommend wood category 001 combined with nickel finish. 844,00 Sovereign Scroll Completely covering acanthus leaves. We recommend wood category 004 combined with nitrate receiver finish ,00 Rausch Scroll Wide curled leaf ornaments. We recommend wood category 001 combined with nickel finish ,00 ENGRAVINGS 47

50 Gold Standard Standard engraving with gold border line. Krieghoff emblem and lettering on the underside of the receiver inlaid in gold. We recommend wood category 002 combined with blued surface finish ,00 K-80 Logo Silver K-80 logo along with border line on both sides, as well as Krieghoff emblem and lettering on the underside of the receiver all inlaid in silver. We recommend wood category 003 combined with blued surface finish ,00 Parcours Special Relief engraving featuring wildfowl scenes. Three different styles of engraving patterns are available. We recommend wood category 003 combined with nickel finish ,00 Super Scroll Completely covering ornamental engraving. We recommend wood category 002 combined with nickel finish ,00 ENGRAVINGS K-80 Logo Gold K-80 logo along with border line on both sides, as well as Krieghoff emblem and lettering on the underside of the receiver all inlaid in gold. We recommend wood category 003 combined with blued surface finish ,00 Uplander Completely covering fine English arabesques. Medallion-style game scene. Motifs: ruffed grouse and woodcock. We recommend wood category 003 combined with nitrate receiver finish ,00 48

51 Plantation Completely covering fine English arabesques. Medallion-style game scene. Motifs: partridge and pigeon. We recommend wood category 003 combined with nitrate receiver finish ,00 Plantation Scroll Completely covering fine English arabesques. We recommend wood category 003 combined with nickel finish ,00 Suhl Scroll Diamond-shaped ornamental engraving featuring leaf arabesques. We recommend wood category 003 combined with nickel finish ,00 Bavaria Royale Game scene with two motifs per side engraved in medallion-style, bordered by leaf arabesques. We recommend wood category 003 combined with nickel finish ,00 Gold Celtic Spacious Celtic ornamental engraving inlaid in gold. We recommend wood category 004 combined with nitrate receiver finish ,00 Gold Super Scroll Completely covering ornamental engraving. Border line as well as Krieghoff emblem and lettering on the underside of the receiver inlaid in gold. Broken target in gold on top latch. We recommend wood category 003 combined with nitrate receiver finish ,00 ENGRAVINGS 49

52 Victorian Scroll Fine English arabesques in shape of large scrolls. We recommend wood category 003 combined with nitrate receiver finish ,00 Gold Plantation Scroll Completely covering engraving with fine English arabesques. Border line as well as Krieghoff emblem and lettering on the underside of the receiver inlaid in gold. We recommend wood category 004 combined with nitrate receiver finish ,00 Gold Uplander Completely covering fine English arabesques. Medallion-style game scene. Motifs: ruffed grouse and woodcock inlaid in gold. Border line as well as Krieghoff emblem and lettering on the underside of the receiver inlaid in gold. We recommend wood category 004 combined with nitrate receiver finish ,00 Gold Plantation Completely covering fine English arabesques. Medallion-style game scene. Motifs: partridge and pigeon inlaid in gold. Border line as well as Krieghoff emblem and lettering on the underside of the receiver inlaid in gold. We recommend wood category 004 combined with nitrate receiver finish ,00 ENGRAVINGS Vintage Game II Modest ornamental engraving featuring wildfowl scenes. Two motifs per side inlaid in gold. Border line as well as Krieghoff emblem and lettering on the underside of the receiver inlaid in gold. We recommend wood category 003 combined with nitrate receiver finish ,00 Heritage Scroll Fine English arabesques with a modest banderole and a gold border line. Krieghoff emblem and lettering on the underside of the receiver inlaid in gold. We recommend wood category 004 combined with nitrate receiver finish ,00 50

53 Asprey Scroll Completely covering large acanthus leaves. We recommend wood category 004 combined with nitrate receiver finish ,00 Gold Victorian Scroll Fine English arabesques in shape of large scrolls. Border line as well as Krieghoff emblem and lettering on the underside of the receiver inlaid in gold. We recommend wood category 004 combined with nitrate receiver finish ,00 Bavaria Suhl Ornamental engraving with mystical faces. Medallion-style hunting scenes with three motifs per side. We recommend wood category 004 combined with nitrate receiver finish ,00 Bavaria Suhl Mystic Ornamental engraving with mystical faces. We recommend wood category 004 combined with nitrate receiver finish ,00 Gold Bavaria Royale Game scene with two animals inlaid in gold, engraved in medallion-style and surrounded by leaf arabesques. Border line as well as Krieghoff emblem and lettering on the underside of the receiver inlaid in gold. We recommend wood category 004 combined with nitrate receiver finish ,00 Highland Game I Flowing thistle leaf ornamentals featuring wildfowl scenes. Three motifs per side. We recommend wood category 003 combined with nitrate receiver finish ,00 ENGRAVINGS 51

54 Highland Game II Flowing floral ornamentals featuring wildfowl scenes. Three motifs per side. We recommend wood category 003 combined with nitrate receiver finish ,00 Monarch Full covering leaf arabesques with gold border line. We recommend wood category 004 combined with nitrate receiver finish ,00 Waterfowl Medallion Completely covering acanthus leaves. Waterscape with mallards and northern pintails engraved in medallion-style and surrounded by leaf arabesques. We recommend wood category 004 combined with nitrate receiver finish ,00 Renaissance Completely covering floral ornamentation, accented by gold details. Gold inlaid lettering on the underside of the receiver. We recommend wood category 004 combined with nitrate receiver finish ,00 ENGRAVINGS Gold Highland Game I Flowing thistle leaf ornamentals featuring wildfowl scenes, accented by gold details. Three motifs per side. Border line as well as Krieghoff emblem and lettering on the underside of the receiver inlaid in gold. We recommend wood category 004 combined with nitrate receiver finish ,00 Gold Highland Game II Flowing floral ornamentals featuring wildfowl scenes, accented by gold details. Three motifs per side. Border line as well as Krieghoff emblem and lettering on the underside of the receiver inlaid in gold. We recommend wood category 004 combined with nitrate receiver finish ,00 52

55 San Remo Wildfowl in flight or hunting scene featuring leaf arabesques. We recommend wood category 004 combined with nitrate receiver finish ,00 Heritage Game I Wildfowl surrounded by fine English Arabesques. Three motifs per side. Border line as well as Krieghoff emblem and lettering on the underside of the receiver inlaid in gold. We recommend wood category 003 combined with nitrate receiver finish ,00 Vintage Game III Modest ornamental engraving with gold accents and wildfowl scenes. Three animals in gold per side. Krieghoff emblem and lettering on the underside of the receiver inlaid in gold. We recommend wood category 004 combined with nitrate receiver finish ,00 Crown Grade Wildfowl or hunting scenes, expressed in gold relief. The medallion-style engraving is completely framed by leaf arabesques. Two motifs per side. Border line as well as Krieghoff emblem and lettering on the underside of the receiver inlaid in gold. Golden crown on top lever. We recommend wood category 004 combined with nitrate receiver finish ,00 Heritage Game II Gold inlaid medallion of wildfowl scene, framed by fine English arabesques. Three motifs per side. Border line as well as Krieghoff emblem and lettering on the underside of the receiver inlaid in gold. We recommend wood category 004 combined with nitrate receiver finish ,00 Gold Heritage Game Medallion of wildfowl scene, framed by fine English arabesques. Three motifs per side in gold. Border line as well as Krieghoff emblem and lettering on the underside of the receiver inlaid in gold. We recommend wood category 004 combined with nitrate receiver finish ,00 ENGRAVINGS 53

56 CUSTOM ENGRAVINGS For years, engravers have artfully applied the finishing touch to guns, lending them a unique character and an expression of their worth. Initial sketches stemming from a dialogue with the gun owner are used to produce a harmonious design encompassing motif, style and material. Krieghoff engravers have a comprehensive repertoire: from deep relief to the very finest Bulino style and from classic hunting scenes to the multifaceted ornamentations of various eras. From precious metal inlays to surface finishing there are no limits to their creative imagination. Using their experience, finesse and talent, our engravers create fine works of art that reflect both the passion and personality of the owner and the value and quality of an exquisite gun. Our master engravers are able to realize virtually any special engraving requirement including the most intricate custom engravings. For a proposal send us your request! Price for plain, unengraved side plates 1 Engraving and wood upgrades are not included. 616,00 Custom Engraving I Deep engraved, full covering leaf arabesques with ornamentic. Custom Engraving II Relief-style engraved hunting scene, covered in oak and thistle leaf with fine detailed elegant gold surrounding line. ENGRAVINGS Custom Engraving III Deep relief-style engraved wild boar scene with oak leaves, surrounded by fine English arabesques. Custom Engraving IV Four different golds yellow, white, green and red create the background for the Bulino style horses. Accents applied in enamel. A display of pictures, regarding further custom engravings, you will find under: 1 Steel receiver only 54

57 VARIOUS SERVICE Fitting of choke tubes, altering fixed chokes into screw-in chokes for all brands: We offer the installation of thin-walled Briley choke tubes into shotgun barrels, also for other brands. Technical requirements will be checked carefully by our master gunsmiths before fitting. After the fitting the gun has to be re-proofed by the Proofhouse. Fitting of chokes per barrel for over & unders or drillings Fitting of one choke into a single barrel shotgun Service charge for C. I. P. barrel proof Service charge for C. I. P. barrel proof (steel shot) 137,00 214,00 53,00 60,00 Flush mount Briley choke tubes for gauges 12, 16 and 20 Available in the following constrictions: Cylinder (CYL), Skeet (SK), 1/4 (IC), 1/4 1/2 (LM), 1/2 (MOD), 3/4 (IMOD), 3/4 1/1 (LF), 1/1 (F) and Super-1/1 (XF) Chokes accessories Choke wrench Speed wrench for quick choke changes (12 and 20 gauge) Special grease for chokes Container for three chokes Container for five chokes One inch extended, non-ported Briley choke tubes Adjustable butt plate for K-80 and KX-6, including fitting of the aluminium base plate 93,00 34,00 116,00 29,00 20,00 21,00 price on request 518,00 GUN CASES A display of pictures, regarding gun cases, can be found on page 58. Exclusive leather case line in Alba leather-style High-quality, brown leather gun case, made of precious Alba leather. The case comes with a leather handle, and two revolving leather straps. Additionally the corners of the case are reinforced with hand-stiched Alba leather patches for maximum durability. Two combination locks. The case interior is made of blue felt. An individual custom-fit for the particular gun will be accomplished at the Krieghoff factory. Price including modification services. For hunting guns, up to a barrel length of 63.5 cm (25"), including scope Weight: ca. 4.7 kg For hunting guns, up to a barrel length of 63.5 cm (25"), including two scopes and one extra barrel Weight: ca. 5.5 kg For over & under shotguns, up to a barrel length of 81 cm (32") Weight: ca. 3.9 kg 1.371, , ,00 55 VARIOUS

58 Aluminum gun case High quality aluminum gun case, with stylish panels bearing the Krieghoff logo on the exterior, and bordeaux red interior lining with the Krieghoff logo embroidered. Especially safe due to two key and one combination lock. With separate compartments for scope, ammunition and accessories. An individual custom-fit for the particular gun will be accomplished at the Krieghoff factory. Price including modification services. For hunting guns, up to a barrel length of 63,5 cm (25"), including scope Weight: ca. 6.7 kg For hunting guns, up to a barrel length of 63,5 cm (25"), including two scopes and one extra barrel Weight: ca. 7.4 kg For over & under shotguns, up to a barrel length of 86 cm (34") Weight: ca. 6.4 kg For over & under shotguns, up to a barrel length of 86 cm (34"), including one extra barrel Weight: ca. 8.0 kg 888, ,00 888, ,00 Krieghoff GunPack This hard-top gun case is made out of black, shock resistant ABS plastic material assembled by ultrasonic welding and the addition of ABS at the fluid state. A Krieghoff lettering in gold is on the upper left of the outer front and inner top part. The inside is made out of velvet-like, blue cloth. It is pre-formed to exactly fit your hunting gun, a scope, and accessories or ammunition. Four hook-and-loop fasteners additionally secure the content. Four pushable catches avoid unwanted opening. Krieghoff GunPack for Hunting Guns Barrel length: max. 74 cm (29") Weight: ca. 2.6 kg Krieghoff GunPack for Semprio Barrel length: max. 79 cm (31") Weight: ca. 2.6 kg 51,00 51,00 Krieghoff gun case premium edition A high class hard-top gun case is made out of shock resistant ABS plastic material assembled by ultrasonic welding and the addition of ABS at the fluid state. Brown leather applications guide the edges and Krieghoff is printed in gold on the front. The inner is made of velvet-like cloth. The bottom part is pre-formed and offers space for the receiver-stock-unit, securable by hook-and-loop fastener, as well as accessories. The upper part is pre-formed for two barrels. The divider pad can be attached to the upper part with two hook-and-loop fasteners securing barrels and extras. Your gun is safe with three independent settable combination locks from unauthorized access. Krieghoff gun case for hunting guns premium edition Including one extra barrel. Suitable for all Krieghoff huntings guns except for the Krieghoff Ultra. Color: green/blue Barrel length: max. 87 cm (34") Weight: ca. 2.8 kg Krieghoff gun case for Semprio premium edition Including two scopes and one extra barrel Color: green/blue Barrel length: max. 87 cm (34") Weight: ca. 4.2 kg Krieghoff gun case for K-80 premium edition Including one extra barrel Color: blue/red Barrel length: max. 87 cm (34") Weight: ca. 3.4 kg 282,00 318,00 295,00 VARIOUS 56

59 SHOOTING VESTS A display of pictures, regarding shooting vests, can be found on page 58. Krieghoff London shooting vest left and right-handed Available without mesh back. 160,00 VARIOUS Krieghoff neopren gun strap The elastic neopren material allows for highest wearing comfort and offers optimal protection against the strap sliding of the shoulder. With Krieghoff emblem embossed. Standard version Exclusive version with leather top Gun care Gun Glide, gun crease, 50 g tube Special grease for chokes 48,00 64,00 13,00 29,00 KRIEGHOFF O N L I N E S H O P Additional accessories like hats, shirts, books, DVDs etc. you will find under: 57 VARIOUS

60 APPENDIX Alba leather case Aluminium gun case Krieghoff GunPack Krieghoff gun case premium edition Shooting Vest London Krieghoff see through sight for hunting guns Barrel porting for Semprio Fluted barrel for Semprio VARIOUS 58

61 Compact version with additional sling swivels on the side of forend and buttstock Krieghoff see through sight for Semprio Muzzle threading with and without individually adapted thread cover bushing Semprio Pro Mount Factory chokes (black),optional titanium chokes (polished) and optional titanium chokes in gold Barrel porting for K-80 Krieghoff Balance System barrel weights Krieghoff Balance System stock weights 59 VARIOUS

62 Custom made stock with ergonomic grip and finger grooves as well as an adjustable butt plate Length of pull adjustment Monogram in gold on the trigger guard Stock magazine with custom engraving Inletting into pistol grip cap with custom engraving Steel pistol grip cap with custom engraving Broken target in gold on top latch. Imperial design extended steel trigger guard VA R IOUS 60