Builders Metalwork Product Selector 2018
|
|
- Sheila Watts
- 5 years ago
- Views:
Transcription
1 Builders Metalwork Product Selector Manufacturing in the UK since 1977
2 Contents SMH Timber to Masonry Joist Hangers 4 Timber to Timber Joist Hangers 4 Angle Brackets 6 Restraint Straps 7 Timber Fixings 8 Wall Ties & Frame Cramps 10 Bead and Mesh 11 Roofing & Miscellaneous 11 Fence Post Anchors & Landscaping Accessories 12 PowaPost Metal Garden Gates 14 PowaTwist Helical System 15 Manufacturing in the UK since
3 Welcome to BPC Building Products Limited Established in 1977, BPC Building Products Limited is an independent privately owned business with over 40 years experience in the manufacture and supply of products to Builders Merchants, Distributors and Retailers across the UK and Ireland. BPC offer a range of tried and tested products that are recognised throughout the industry as being easy to use, trouble free and long lasting. Located in West Yorkshire with direct access to the M1 and other major motorway networks, we are committed to satisfying customer requirements at all times by providing a quality service both competitively and efficiently. Our quality management system meets the requirements of ISO 9001:
4 SMH Timber to Masonry Joist Hangers SMH Single Piece Masonry Hanger: Designed for building into brickwork or blockwork. As standard all hangers are manufactured from 2.0mm thick pregalvanised steel to BS EN : 2009, S280+ G275 compliant with BS EN and to the requirements of BS5268. Return and straddle type hangers are available to order. Timber to Timber Joist Hangers MINI Joist Support: Ideal for trimming around ceiling hatches and other similar light duty applications. Suitable for timber depth up to 100mm. A190 Short Leg Hanger: Lightweight hanger manufactured from 0.9mm thick galvanised steel, for timber to timber application. 190mm leg length, suitable for 100 to 150mm timber depth. 4
5 A270 Standard Leg Hanger: A lightweight galvanised joist hanger providing a strong connection and quick and easy installation. Designed with wider 50mm strap legs to enhance performance with increased nail spacing. Suitable for joist depths of 150 to 250mm. Leg length can be adjusted by wrapping over to suit joist height. Also suitable for face fixing. B340 Medium Duty Joist Hanger: Manufactured from 1.2mm thick galvanised steel. Suitable for joist depths of up to 250mm. Design features a location tab on the hanger base, designed to allow quick and accurate alignment of the hanger. B460/B610 Long Leg Joist Hangers: Manufactured pre-galvanised steel, the B460 (1.2mm thick) and B610 (1.5mm thick) offer 460mm and 610mm long legs, suitable to be either face fixed or wrapped over supporting joists. For loft conversion applications where the hanger extends below the supporting beam, a maximum drop of 75mm is recommended. MTH Multi Truss Hangers: Manufactured from 1.5mm thick galvanised steel. Bolt hole to suit M12 fixing, nail holes 4mm diameter. Produced from galvanised steel to BS EN 10346: G275 as standard. Stainless steel hangers are available to order. MTS Mono Truss Shoe: Designed for use in a mono / short span / infill truss to girder connection in a low load situation. Manufactured from 0.9mm thick galvanised steel. GTS Girder Truss Shoe: Designed to provide a structural connection between a truss and a girder truss or beam. Features a location tab allowing easy accurate alignment of the hanger. 1.2mm thick, suitable for face fix or wrap-over fixing. 5
6 Angle Brackets AB Heavy Duty Angle Bracket: A versatile reinforced bracket, 2.5mm thick x 60mm wide, available in 4 sizes: 60x40, 90x90, 150x90 and150x150mm. ABL Heavy Duty Angle Bracket: Heavy duty 2.5mm thick brackets without reinforcing gusset for flush fit application. 60mm wide, available in 5 sizes: 50x50, 60x40, 90x90, 150x90 and 150x150mm. FCP Heavy Duty Flat Connector Plate: 60mm wide x 2.5mm thick versatile connector plates available in 100, 180, 240 and 300mm lengths. AAB Adjustable Angle Bracket: A range of 30mm wide adjustable brackets, available in 50 x55, 70x55, 100 x 55 and 120 x 55mm sizes. T and L Brackets: Heavy duty galvanised brackets used for connecting timbers to make a T or L shaped joint. HDA Holding Down Angle: 30x30x2.0mm thick galvanised angle, available in 100, 200, 300 and 500mm lengths. AP Angle Plate: A versatile range of 2.5mm thick galvanised brackets and plates, suitable for nail or screw fixing, used to strengthen timber joints. Available in 40x40x20, 40x40x40, 60x60x40, 60x60x60, 80x80x80mm sizes and as a flat connector 60x200mm long. NPAB Nail Plate Angle Bracket: A light duty 0.9mm thick perforated angle with reinforced nails holes. Available in 50x50x50, 75x75x75 and 100x100x100mm sizes. 6
7 AB40 Angle Bracket: Manufactured from heavy duty 3mm thick galvanised steel, these 40mm wide brackets are available in 45x45, 90x45, 90x90mm angle sizes and as a 40x175mm flat connector. CB Corner Bracket: Zinc plated light duty corner brackets for light duty application, available in a range of widths and sizes. BRA Light Duty Angle Braces: Available in 18x18x18mm and 25x25x28mm sizes. CSP Corner Stretcher Plate: Zinc plated light duty bracket with twin slotted face for easy adjustment. CPL Corner Plate: 1mm thick corner fixing plate 82x82mm. MP Mending Plates: A range of light duty mending plates in zinc plate finish. Available as a flat plate, or T and L plate format in various sizes. Restraint Straps CE Marked and tested to BS EN 845-1:2008. Designed in accordance with The Building Regulations, BS5268 Part 3 and other building standards for vertical and horizontal restraint. Heavy duty restraint straps: Suitable for horizontal restraint applications such as tying timber roofs and floors into masonry walls. Light duty restraint straps: Can be used for vertical restraint applications such as tying down timber wall plates. 7
8 Timber Fixings TC Truss Clip: Designed to provide an inexpensive and effective method of fixing trussed rafters to wallplates as recommended in BS 5268 : Part 3. Available in 38, 44, 47 and 50mm widths. FA3 Framing Anchor: Multi - purpose fixing that can be used for connecting roof timbers, joist trimmings, studding and general timber frame construction. Slotted design allows bending on site to suit all configurations. Manufactured from 1.2mm thick galvanised steel. NP Hand Nail Plate: A cost effective method of jointing structural timbers (such as site built trusses) simply by nailing through the pre -punched holes. Plates must be fixed on both sides of the timber. The pressed dimple design adds strength and rigidity to the component whilst also assisting in the location of nails. Available in a wide range of widths and lengths. GS Glide Shoe: A purpose made galvanised metal bracket specifically designed to allow raised tie or scissor trussed rafters to achieve designed deflection, both horizontally and vertically. SP Splice Plate: An economical on-site method of butt jointing timbers of similar section. Suitable for use when replacing rotten floor joist ends, replacement of fire damaged timbers and repairing localised structural timber damage. Must be fixed in sets of 4 per joint, minimum timber thickness 50mm. 8
9 HJS Herringbone Joist Strut: A superior alternative to timber strutting, Herringbone Struts offer a cost effective method of providing necessary lateral support to floor joists as required by the Building Regulations. Fix to the top and underside of joists using the pre-punched holes. PP Pallet Plate: A multi-purpose galvanised plate manufactured from 1mm steel, used to connect timbers without the use of nails. This product must not be used to fabricate roof trusses. SPA Sole Plate Anchor: Designed for use as anchorage of timber sole plate to concrete base, but may also be used as a frame tie for fixing timber window frames. MFS Multi-Fix Strapping: An inexpensive perforated strip which can easily be cut or bent to provide a quick and reliable solution for general fixing/repair work and many other DIY jobs. Manufactured from 0.9mm thick galvanised steel. Also available from stock in Stainless Steel. Available in 20, 25 and 50mm widths in various coil lengths. SPL Safe Plate: Secured to timber studding by use of prepunched spikes, to protect plumbing and electrical wiring against random nailing. DSTC/SSTC Timber Connectors: Single and double sided toothplate connectors designed to improve the performance of bolted connections. Available in 38, 50, 63 and 75mm diameter. SHER/ST Sherardised Square Twist Nails: 30x3.75mm, supplied in either bulk boxes of 25kg (approx 10,000 pcs) or polybags of 1.25kg (approx 500 pcs). SS/ARS Annular Ring Shank Nails: 50x3mm stainless steel nails supplied in boxes of 250 pcs or polybags of 100pcs. SPW Square Plate Washers: 50x50mm zinc plated with hole to suit M12 bolt. 9
10 Wall Ties & Frame Cramps Stainless Steel Cavity Wall Ties: Type 4, Type 2 and Type 1 ties to suit all cavity wall situations. EIC Insulation Clips: A universal retaining clip designed to hold insulation in position against the inner leaf of a cavity wall. FC Frame Cramps: Safety and fishtail end frame cramp with 50mm upstand and three fixing holes available in galvanised and stainless steel. PFT Timber Frame Wall Tie: Stainless steel brick to timber wall ties to suit 50 to 100mm cavity widths suitable for use in timber frame construction, supplied with nails. UWS Universal Wall Starter Kits: A fully adjustable sliding wall tie system, designed to suit masonry walls mm wide for extension and conversion applications. 10
11 Bead and Mesh Plasterers Angle Bead: A full range of galvanised and stainless steel corner beads for all internal and external applications. BR Brickwork Reinforcement: Expanded metal available in galvanised and stainless steel in 63, 100, 175, 225 and 300mm widths x 20m coil. EML / RL Expanded Metal Lath & Rib Lath: Available in galvanised and stainless steel. SLR Bed Joint Ladder Reinforcement: Galvanised and stainless steel welded masonry ladder reinforcement for use in masonry walls, designed to help prevent cracking. Roofing & Miscellaneous ALS Aluminium Soaker Plates: Aluminium Roof Soakers, designed to protect against weather at the point where a roof meets a vertical face, such as a wall or chimney. WIBAL Wire Balloons: Galvanised wire cowl for protection against birds or leaves. Available in a full range of sizes to suit all common situations. SHI Hip Irons: Steel retaining bracket with decorative scroll design, used with traditional hipped roofs to prevent ridge tile movement. GWB Galvanised Weather Bar: 28 x 4mm edge coated weather bar supplied in any length to order. 11
12 Fence Post Anchors & Landscaping Accessories DPS Drive-In Fence Spikes: Heavy duty welded mild steel spike with powder coated finish, available to suit 50x50, 75x75 and 100x100mm fence posts. Choice of twin bolt arrangement to secure post or easygrip wedge grip system. PS1 Bolt Down Post Shoes: Twin bolt arrangement, available to suit 50x50, 75x75 and 100x100mm posts with standard square base plate (PS1) or flush fit rectangular base (FPS1). PS2 Concrete-In Shoe: Designed to be fixed into new Concrete the PS2 shoe is available to suit 75x75 and 100x100mm posts. RS Repair Spike: Used to repair broken fence posts, to suit 75x75 and 100x100posts. PEX Post Extender: A wedge grip connector that quickly and securely attaches to any 75x75 or 100x100mm post to attach a new section for example to add trellis panels. 12
13 Panel Clips and Accessories: A range of galvanised fixings for fencing and landscaping including panel clips, arris rail brackets, gravel board clips, log roll pins and gabions. Dual-Coated Angle Brackets: A comprehensive range of dual-coated galvanised & powder coated brackets suitable for garden and landscaping applications. 13
14 Metal Garden Gates Sturdy welded steel gates available in three elegant designs - Surrey, Avon and Hamble. PowaPost gates are simple to install, phosphate treated and fully finished in black gloss. 1. Avon Gate: 910H x 838W for opening 900mm 2. Surrey Gate: 1090H x 838W for opening 900mm 3. Hamble Gate: 1030H x 838W for opening 900mm
15 Helical System The PowaTwist system consists of stainless steel PowaTwist bars and PowaTwist grout, providing superb axial strength and excellent bonding characteristics when reconnecting cracked masonry. PowaTwist Helical Bars Manufactured from grade 304 austenitic stainless steel to BS EN 845-1, PowaTwist bars are designed and manufactured to provide a superb combination of axial strength and flexibility. Minimises the likelihood of further cracking when used with PowaTwist Grout, and provides a permanent repair without the need to re-build. Available in 4.5, 6, 8 and 10mm diameter, in 1000, 1500 and 3000mm lengths. PowaTwist Grout A high performance, non-shrink, non-gassing, cement based grout, suitable for injection with an applicator gun and especially formulated for use with PowaTwist bars. PowaTwist Crack-Stitching Kit A two component system consisting of stainless steel PowaTwist bars, PowaTwist grout and applicator gun with all accessories. 15
16 BPC Building Products Limited Flanshaw Way Wakefield WF2 9LP Telephone: Fax:
Catnic Pontypandy Industrial Estate Caerphilly CF83 3GL T: F: English version
www.catnic.com Care has been taken to ensure that the contents of this publication are accurate, but Tata Steel Europe Limited and its subsidiaries, which includes Tata Steel UK Limited, do not accept
More informationBuilders Metalwork Product Selector
www.catnic.com Builders Metalwork Product Selector September 2015 Care has been taken to ensure that the contents of this publication are accurate, but Tata Steel Europe Limited and its subsidiaries, which
More informationF I X I N G B R O C H U R E
F I X I N G B R O C H U R E Joist Hangers Joist Hangers on Steel Beams Fixing Masonry Hangers Speedy Joist Hangers Lateral Restraint Straps Roof Tie Down Straps Herring Bone Joist Strut Bat 'U' Nail Plate
More informationSINGLE PIECE MASONRY HANGERS
SINGE PIECE MASONRY ANGERS TECNICA DATA SEET The FM Single Piece Joist anger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm². They are
More informationTimber to Timber - Timber to Concrete - Timber to Steel
01/2017 TIMBER CONNECTORS NOT TO BE USED IN EXTERIOR SITUATIONS Stainless Steel alternatives are available where stated Timber to Timber - Timber to Concrete - Timber to Steel MiTek manufactures and markets
More informationSTRUCTURAL BRACKETS CATALOGUE
0/2 STRUCTURAL BRACKETS CATALOGUE SUPERIOR QUALITY, HOT DIP GALVANISED, HEAVY DUTY BRACKETS FOR FIXING TIMBER TO TIMBER, TIMBER TO CONCRETE, TIMBER TO STEEL The BOWMAC product range is designed to cut
More informationAcceptable Standards of Domestic Construction
Truss or Rafter Roof Batten Triple grip fastener (for roof trusses) Foil lined Insulation blanket Top plate Sprocket Brick tie Top plate strapping at 1200mm max. cts. Note: Holding down straps should be
More informationDesign Guide Pryda Connectors for Steel Framing
Pryda Connectors for Steel Framing Copyright: (c) Pryda Australia A Division of ITW Australia November 2012 November 2012 Design Guide Pryda Connectors for Steel Framing INDEX General Notes General information
More informationInstallation guide for 20/20
Introduction The following installation instructions are recommended minimum requirements for the 20/20. The designer and fixer should ensure that tiles are installed in accordance with BS 5534; The British
More informationSuperior Fencing Accessories
Superior Fencing Accessories Product Catalogue Discover our huge range of post supports, fencing and decking accessories! POST SUPPORT SYSTEMS: Fencemate post support systems are designed to help put up
More informationProduct Dimensions (mm) Overall length (including any bend) Pre Galvanised - 1.4mm thick x 36mm wide. Declared values for the TRS strap
TECO Straps TRS The Ron Sammons The Ron Sammons is lightweight to handle yet retains its structural strength so it can be used instead of a traditional Heavy Duty Strap for providing lateral restraint
More informationSTRUCTURAL BRACKETS CATALOGUE
08/2011 STRUCTURAL BRACKETS CATALOGUE SUPERIOR QUALITY, HOT DIP GALVANISED, HEAVY DUTY BRACKETS FOR FIXING TIMBER TO TIMBER, TIMBER TO CONCRETE, TIMBER TO STEEL The BOWMAC product range is designed to
More informationfencing fencing winders & strainers 110 timber connectors 111 straps & brackets 112 fence fittings 118 fencing tools 121 fence post supports 124
1 winders & strainers 110 timber connectors 111 straps & brackets 112 fence fittings 118 tools 121 fence post supports 124 109 order online at www.hinges.co.uk winders & strainers NO.423 BOLT LOCKING STRAINERS
More informationINSTALLATION GUIDE. Outback. Flat Attached BEFORE YOU START ADDITIONAL MATERIALS TOOLS REQUIRED. VERAnDAHS PATIOS CARPORTS
INSTALLATION GUIDE Outback VERAnDAHS PATIOS CARPORTS Flat Attached BEFORE YOU START It is important to check your Local Government Authority requirements before the installation of your new Stratco Outback
More informationA Shell construction
A Shell construction A 4/2012 Content 1 BASE AND WALL ANCHORING 1.1 Base with mortar bed 1.2 Base with sill plate 1.3 Base with raised sill plate 1.4 Concrete base (mortar bed) 1.5 Concrete base (sill
More informationGLOSSARY OF TERMS SECTION 8
GLOSSARY OF TERMS SECTION 8 Anchor Bolt Angle Base Plate Bay Blocking CCB Centerline Chord Cladding Clip Closure Strip An A-307 steel bolt embedded in the concrete footing to anchor the base plate of the
More informationAUXILIARY FRAMING AND ACCESSORIES
CUSTOM CABINETS & RACKS STRUT AND ACCESSO- RIES JUNCTION KITS ANGLE AND BRACE KITS SPLICE KITS BRACE KITS INSTALLATION KITS WALL ANGLE KITS RUBBER END CAPS SUPPORT INSTALLATION AND SUPPORT KITS STANCHION
More informationPryda Timber Connectors
Pryda Timber Connectors Pryda Lintel Guide Engineered Steel Wall Lintels March 2014 ESSENTIAL NOTES PRYDA PRODUCT GUIDES INTRODUCTION The information in this Product Guide is provided for use in Australia
More informationOUTBACK FLAT ATTACHED VERANDAH PATIO CARPORT - INSTALLATION GUIDE BEFORE YOU START TOOLS REQUIRED ADDITIONAL MATERIALS
BEFORE YOU START It is important to check your Local Government Authority requirements before the installation of your new Stratco Outback Flat Verandah. It is the builder s responsibility to ensure any
More informationGALVANISED STEEL POST SUPPORTS
TWO SYSTEMS... ONE END RESULT BIC GARDEN Galvanised Steel Post Supports allow the installation of fence posts in minutes without the need for digging or mixing concrete. Manufactured from heavy gauge galvanised
More informationBest Barns USA. the Brookhaven 10' x 16' Assembly Book. revised March 23, 2016
Best Barns USA Assembly Book revised March 23, 2016 the Brookhaven 10' x 16' Manufactured by Reynolds Building Systems, Inc. 205 Arlington Drive Greenville, PA 16125 724-646-3775 This manual is copyrighted.
More informationIndex Pipe Hangers and Straps
Index Pipe Hangers and Straps Fig. 1 Standard Clevis Hanger MSS-SP-69, Type 1 WW-H-171E, Type 1 Page 14 Fig. 1CI Clevis Hanger for A.W.W.A. Page 16 Fig. 81 Clevis Hanger WW-H-171E, Type 12 Page 70 Fig.
More informationTHANK YOU FOR PURCHASING FROM HERITAGE PATIOS
Installation Guide THANK YOU FOR PURCHASING FROM HERITAGE PATIOS Your purchase is engineered by nearly a half century of commercial and residential product design proudly manufactured in the USA from responsibly
More informationISSUE Erection Manual
Erection Manual The details and information in this book are for guidance of the erection of panels and flooring only. They are not site specific. Refer to the relevant panel drawings for the site, which
More informationFASTENERS BUILDING DEPARTMENT
FASTENERS BUILDING DEPARTMENT 952-446-1660 WWW.CITYOFMINNETRISTA.COM This handout is intended only as a guide and is based in part on the 2015 Minnesota Residential Code, Minnetrista City ordinances, and
More information2013 Feeney (2/14) # B. Aluminum Railing Systems
2013 Feeney (2/14) #2012-425B Aluminum Railing Systems Aluminum Railing Systems Searching For a Complete Railing System? Look No Further. DesignRail by feeney aluminum railing frame systems combine the
More informationINSTALLATION INSTRUCTIONS for TB6.2,TB7.0, TB7.8 & TB8.4
the unique loft conversion & flooring system INSTALLATION INSTRUCTIONS for TB6.2,TB7.0, TB7.8 & TB8.4 Unit 6, Devizes Trade Centre, Hopton Park, Devizes, Wiltshire, SN10 2EH t 01380 739000 e info@telebeam.co.uk
More informationSecuAnch Roof Anchor System
Height Safety Products Email: marketing@fallprotec.com SecuAnch Roof Anchor System 1 Presentation The SecuAnch lifeline is designed to be permanently installed on buildings and other structures where maintenance
More information2015 Feeney (8/15) # D. Aluminum Railing Systems
2015 Feeney (8/15) #2012-425D Aluminum Railing Systems Aluminum Railing Systems Searching For a Complete Railing System? Look No Further. DesignRail by feeney aluminum railing frame systems combine the
More informationTimber Connectors & Post Anchors. Click to start
Timber Connectors & Post Anchors Click to start Pryda Pryda has been an integral part of the building industry in Australia for over 40 years, particularly in timber truss and frame solutions with the
More informationENGINEERED BUILDING PRODUCTS. CycloneTie CT1200 CT900 CT600 CT400 CT180. mitek.com.au
ENGINEERED BUILDING PRODUTS yclonetie T1200 T900 T600 T400 T180 mitek.com.au Ti e FOR ROOF SEURITY UNDER EXTREME WIND ONDITIONS APPLIATION: ycloneties are used to secure purlins, rafters and trusses to
More informationCURVED ROOF ASSEMBLY INSTRUCTIONS ATTACHED VERANDAH. Your supplementary guide to building an ATTACHED CURVED ROOF VERANDAH or PATIO BEFORE YOU START
ROOF ATTACHED VERANDAH ASSEMBLY INSTRUCTIONS Your supplementary guide to building an ATTACHED ROOF VERANDAH or PATIO This set of instructions should be used in conjunction with the Stratco instruction
More informationPosi-Joist Installation Guide. A guide for storage, handling and installation of the MiTek Posi-Joist floor system
Posi-Joist Installation Guide A guide for storage, handling and installation of the MiTek Posi-Joist floor system Posi-Joist Installation Details A B C D F E A Masonry Wall Connection Details Blockwork
More informationSections & Details VOCABULARY
1 Sections & Details VOCABULARY 1 ROOF FRAMING DETAIL RIDGE BOARD SHEATHING SHINGLES WEB FASCIA RAFTER (chord) SOFFIT SHEATHING STUD INSULATION DOUBLE TOP PLATE CEILING JOIST 2 FOUNDATION DETAIL STUD SHEATHING
More informationPENSTOCK VALVES. Performance through Excellence
VALVES & MANUFACTURING (1988) LTD. PENSTOCK VALVES Performance through Excellence SLIDEGATES WEIR GATES STOP LOGS SLIDEGATES PRECISION FACE SEALING VALVES WEIR GATES STOP LOGS SLIDEGATES Actuation Installation
More informationHOME STRENGTHENING GUIDE HOW TO ECONOMICALLY STRENGTHEN YOUR HOUSE AGAINST EARTHQUAKES AND HURRICANES
HOME STRENGTHENING GUIDE HOW TO ECONOMICALLY STRENGTHEN YOUR HOUSE AGAINST EARTHQUAKES AND HURRICANES Grenville W Phillips II BSc, BEng, MASc, MURP, CEng, FIStructE, FCIHT, MAPM, MCSCE, MBAPE Chartered
More informationTOLL FREE:(888) FAX:(941) ASSEMBLY of ProTEC CONCRETE STRUCTURAL INSULATED PANEL
ASSEMBLY of ProTEC CONCRETE STRUCTURAL INSULATED PANEL The ProTEC panels are manufactured with grooves on all four sides to accept the steel components. This grooving applies to the regular panel whose
More informationPryda Timber Connectors Nailplates Guide
Pryda Timber Connectors September 2016 A complete guide to the design, specifications and installation of Pryda Nailplates Pryda TABLE OF CONTENTS GENERAL NOTES Useful Notes and Definitions for effective
More informationBRACING BRACING SECTION 7 SECTION 7
If we are to learn from the past, it is clear that there is generally a lack of understanding of the purpose of roof bracing and who should be responsible for it. This has led to disputes, claims and,
More informationWESTERN WIRE PRODUCTS
WESTERN WIRE PRODUCTS Celebra ng 100 years of Quality and Service 1914 2014 Thanks to our dedicated employees and customers we are celebra ng 100 years of being in business and we look forward to servicing
More information3.1 General Provisions
WOOD FRAME CONSTRUCTION MANUAL 107 3.1 General Provisions 3.1.1 Prescriptive Requirements The provisions of this Chapter establish a specific set of resistance requirements for buildings meeting the scope
More informationWAL-MART SUPERCENTER # ; Milwaukie, OR: SPECIFICATIONS. Revisions to Specification Fence
MILWAUKIE OR #3144-00 ADDENDUM #5 NARRATIVE: 11-08-12 WAL-MART SUPERCENTER #3144-00; Milwaukie, OR: SPECIFICATIONS SPECIFICATIONS Revisions to Specification 02822 Fence Spec division 02822 has been revised
More informationProducts for fixing to Steelwork and Decking
Products 8.0 Beam Clamp - Single Support 8.1 Universal Joint for any variable Angle Adjustment 8.2 Beam Clamp TCS for Header Rails 8.3 Beam Clip for Cross Support/ Dimensioning of Bolts 8.4 Beam Clip for
More informationFASTENERS & ACCESSORIES
Staples General purpose staples to suit most popular staple guns. Particularly useful for stapling external angles and PVC mouldings to timber frames. PlasterX staples are designed to fit PLASTERX Arrow
More informationtable of contents Sliding Door Accessories Page Latches & Snuggers Stay Rollers Brackets & Stops
table of contents Square Track & Accessories Pages 4-7 Square Track Options Page 4 Light Duty Track Page 4 Square Track Brackets Page 5 Square Track Accessories Page 5 Square Track Trolleys Page 6-7 Offset
More informationCopper Tubing Hangers Clevis Hangers. Copper Tubing Hangers
Copper Tubing Hangers Clevis Hangers Copper Tubing Hangers Fig. CT-69 Adjustable Swivel Rug Fig. CT-138R Fig. CT-65 Fig. CT-109 Extension Split Light Weight Adjustable Clevis Fig. CT-99 & CT-99C Split
More informationUPPER FLOORS TIMBER AND CONCRETE
UPPER FLOORS TIMBER AND CONCRETE FUNCTIONS OF AN UPPER FLOOR Functions: Support imposed loads Not deflect under load Strength and stability Provide restraint for external walls Fire resistance (30 minutes)
More informationWanco Electric & Machinery Pte Ltd. Cable Management Systems. Cable Trunking
Wanco Electric & Machinery Pte Ltd Cable Management Systems Cable Trunking About Wanco Wanco Electric and Machinery Pte Ltd is the leader in electrical construction materials. Through continued support
More informationHEAVY DUTY REINFORCEMENT
HEAVY DUTY REINFORCEMENT HEAVY DUTY REINFORCEMENT Strap Braces Corner Braces Corner Braces - Offset Leg Wide Corner Braces Square Corner Braces Mending Plates Corner Plates Bar Holders 3 4 5 6 7 8 9 10
More informationPryda Timber Connectors
Pryda Timber Connectors A complete guide to the design, specification and installation of Pryda High Capacity Products March 2012 ESSENTIAL NOTES PRYDA PRODUCT GUIDES INTRODUCTION The information in this
More informationCEILING-MOUNTED MONORAIL ANCHOR TRACK SYSTEM Assembly and Operation Instruction Manual
CEILING-MOUNTED MONORAIL ANCHOR TRACK SYSTEM Assembly and Operation Instruction Manual This manual is for various mounting types and plain and trussed track profiles. ISO 9001:2008 Registered Manual 103-0075
More informationINS A KSR INSTALLATION INSTRUCTIONS STANDARD PROCEDURE. 1. Verify Curb Installation Required Installation Tools...
INS-88.300-0A KSR INSTALLATION INSTRUCTIONS STANDARD PROCEDURE 1. Verify Curb Installation... 2 2. Required Installation Tools... 2 3. Unpacking the KSR... 3 4. Attach KSR Bottom Rail to Curb... 5 5. Attach
More informationShingle Installation Guide
Installation Guide Roof Framing Information Installation Installation Accessory Installation Estimating Data General Information Roof Framing Information It is the responsibility or roofers, building contractors
More information8x8 Shed Plans and Building Guide
Page 1 Legal 2018 Zac Spade & Christopher D. Brown. All Rights Reserved For information about special discounts available for bulk purchases, sales promotions, fundraising and educational needs, contact
More informationA. Rough carpentry includes but is not limited to the following:
SECTION 06100 ROUGH CARPENTRY PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division-1 Specification Sections,
More informationCONSERVATORY ROOF INSTALLATION GUIDE Issue
CONSERVATORY ROOF INSTALLATION GUIDE Issue 3 CONTENTS 1. Statements 2. General assemblies 3. Victorian / Edwardian roof installation 4. Jack rafter installation 5. P-shaped roof installation 6. Lean-to
More informationWood structures Copyright G G Schierle, press Esc to end, for next, for previous slide 1
Wood structures Copyright G G Schierle, 2001-02 press Esc to end, for next, for previous slide 1 Wood Types: Balloon framing (rare) Platform framing Heavy timber framing Advantages: The only renewable
More informationBest Barns USA Assembly Book Revised November 3, 2016
Best Barns USA Assembly Book Revised November 3, 2016 the Aspen II 12' x 8' Manufactured by Reynolds Building Systems, Inc. 205 Arlington Drive, Greenville, PA 16125 This manual is copyrighted. Under the
More informationEurocell conservatory roof system. Installation manual Issue 3
Eurocell conservatory roof system Installation manual Contents Statement General Assemblies Cross Sections Victorian/ Edwardian Roof Installation Jack Rafter Installation P Shape Roof Installation 15-45
More informationDowel-type fasteners. Timber Connections. Academic resources. Introduction. Deferent types of dowel-type fasteners. Version 1
Academic resources Timber Connections Dowel-type fasteners Version 1 This unit covers the following topics: Deferent types of dowel-type fasteners Introduction There are four criteria designers should
More informationGloEx Product List Assessment-Nail Selection
Item 01 Common Nail Bright Finish/HDG Flat Smooth/Ring FOR GENERAL CONSTRUCTION, CARPENTRY AND FRAMING. MADE TO CONFORM TO ASTM F1667. : Electrogalvanized option available Package s 3D 1-1/4" 14 13/64"
More informationChain, Rope & Accessories
A Perry Product Guide A range of both steel and plastic chain, including accessories. This range includes:- Steel Chain Plastic Chain Security Chain Accessories for Plastic Chain Accessories for Steel
More informationNEW equinox INSTALLATION GUIDE Issue
NEW equinox INSTALLATION GUIDE Issue 2 CONTENTS 1. Preparing the ring beam 2 2. Installing the framework 3 3. How to install structural support posts 7 4. Insulation and waterproofing 8 5. Tile application:
More informationTRADITIONAL GABLE ATTACHED PATIO AND CARPORT. Your complete guide to building an ATTACHED Outback TRADITIONAL GABLE PATIO or CARPORT
TRADITIONAL GABLE ATTACHED PATIO AND CARPORT STRATCO OUTBACK ASSEMBLY INSTRUCTIONS. Your complete guide to building an ATTACHED Outback TRADITIONAL GABLE PATIO or CARPORT BEFORE YOU START Carefully read
More informationPART MATERIALS. Section Fencing Materials. Description
PART 03000 - MATERIALS Section 03010 - Fencing Materials Description 03010.00 Scope - This section consists of the test requirements, specifications and tolerances for barbed wire, woven wire and chain
More informationNails, Fasteners, Connectors, and Framing
Nails, Fasteners, Connectors, and Framing Nails To order Nail Sizes Nail length is often referred to as d or penny. For example a 10-D nail or a 10 Penny Nail. Use the following chart for nail length reference.
More informationThe Leka System Installation Guide
Installation Guide The Leka System Installation Guide The following guide has been created to assist in the fabrication and installation of the Leka System. Please note that each roof is individual and
More informationINSTALLATION GUIDE. Outback Clearspan Gable BEFORE YOU START ADDITIONAL MATERIALS ADDITIONAL MATERIALS WITH COOLDEK ROOFING
INSTALLATION GUIDE Outback Clearspan Gable WITH COOLDEK ROOFING BEFORE YOU START It is important to check your Local Government Authority requirements before the installation of your new Stratco Outback
More informationPLASTERERS ACCESSORIES
Building industry expertise since 1889 PLASTERERS ACCESSORIES CONTENTS Welcome to this latest guide from Expamet the brand you can always rely on Expamet products are developed to ensure high levels of
More informationCorner Potting Store Assembly Instructions
Corner Potting Store Assembly Instructions English SS225E Before assembly We recommend that time is taken to read the instructions before starting assembly, then follow the easy step by step guide. The
More informationAPPENDIX FENCE GENERAL NOTES
APPENDIX FENCE GENERAL NOTES 1. Fabric: 9 gage, 2" mesh, knuckle top and bottom, placed on the outside of posts, single fabric width for the entire height. 2. All fencing to be standard galvanized finish.
More informationMethod of Build 1. Fire. Sound
Method of Build 1 General Viso Fire & Acoustic in the solid form differs from most other systems as it can be erected using 12.5mm & 15.0mm boards within the same Aluminium framework. Also hidden fix board
More informationRecommended Slating Tools
Recommended Slating Tools Product Size L Sketch of Article No. Description 60-070 Scriber 60-00 Slater s Hammer 60-00 Slater Ripper 60-080 Parallel Shears 60-0 Slate Cutter Kwiksnip Slate Guuillotine Slate
More information10x10 Shed Plans and Building Guide
Page 1 Legal 2018 Zac Spade & Christopher D. Brown. All Rights Reserved For information about special discounts available for bulk purchases, sales promotions, fundraising and educational needs, contact
More informationDowntown Rack. Custom logo option available
Custom logo option available Downtown Rack The Downtown Rack uses thick, square-tube construction that can t be cut with a pipe cutter. The extended width of the Downtown Rack makes for easy bike parking
More informationCLEARSPAN GABLE STRATCO OUTBACK ASSEMBLY INSTRUCTIONS. WITH GAZEBO END ATTACHED PATIO
CLEARSPAN GABLE WITH GAZEBO END ATTACHED PATIO STRATCO OUTBACK ASSEMBLY INSTRUCTIONS. Your supplementary guide to building an ATTACHED CLEARSPAN GABLE VERANDAH or PATIO WITH GAZEBO END This set of instructions
More informationtechnical bulletin Roofline Installation Details No.7 Fascia Installation Details Typical Eaves Details K16 Fascia & 9mm Vented Soffit
Roofline Installation Details This is intended to provide you with a brief overview of the popular products in Kestrel s Roofline range, where they can be used and the main criteria for installation. Typical
More informationSECTION MASONRY ANCHORAGE AND REINFORCEMENT. Display hidden notes to specifier. (Don't know how? Click Here)
PART 1 GENERAL 1.1 SECTION INCLUDES SECTION 04080 MASONRY ANCHORAGE AND REINFORCEMENT Display hidden notes to specifier. (Don't know how? Click Here) A. Post installed masonry anchors. B. Miscellaneous
More informationFactory Assistance: Phone: Fax: Page 1
CABLE RUNWAY ACCESSORIES Radius Drop / Stringer Drop Provides 3 bend radius Radius drop fits 6, 12 and 18 runway made from 1-1/2 x 3/8 tubing Steel construction Includes (3) cable spools, (1) bolt, (1)
More informationLE7000 Provincial Built-in (Zero Clearance) Kit Instructions.
LE7000 Provincial Built-in (Zero Clearance) Kit Instructions. LE7000 Provincial ZC Kit contains: Part No. Quantity Description Picture 503259 4 Self Threading Screw 13mm 503459 6 Self Threading Screw Timbertites
More informationConnectors for Cold-Formed Steel Curtain-Wall Construction
The expiration date of this document has been extended until 2/3/3. Introducing Connectors for Cold-Formed Steel Curtain-Wall Construction Code Listed: IAPMO ES ER-238 (800) 999-5099 www.strongtie.com
More informationContents. Technical Metal Industrial Co. L.L.C.
We, at Technical Metal Industrial Co. L.L.C. take pride in declaring the company s commitment to satisfy our customers by providing high quality products and promptly delivering them as per the agreed
More informationROOF FRAMING INFORMATION BATTEN INSTALLATION CORONA SHAKE INSTALLATION ACCESSORY INSTALLATION ESTIMATING DATA GENERAL INFORMATION
ROOF FRAMING INFORMATION BATTEN INSTALLATION CORONA SHAKE INSTALLATION ACCESSORY INSTALLATION ESTIMATING DATA GENERAL INFORMATION ROOF FRAMING INFORMATION It is the responsibility or roofers, building
More informationSECTION ROUGH CARPENTRY 1.1 DESCRIPTION OF WORK:
SECTION 061000 - ROUGH CARPENTRY 1.1 DESCRIPTION OF WORK: A. Definition: Rough carpentry includes carpent~y work not specified as part of other sections and which is generally not exposed, except as otherwise
More informationFastener Schedule. a, b, c. FASTENER Roof 3-8d (2 1 / ) / ) 3-10d. 3-10d ( ) 3-16d box nails. (3 1 2 toe nails on one side
ITEM 1 DESCRIPTION OF BUILDING ELEMENTS Blocking between joists or rafters to top plate, toe 2 Ceiling joists to plate, toe 3 4 5 6 Ceiling joists not attached to parallel rafter, laps over partitions,
More informationtechnical bulletin Roofline Installation Details No.7 Fascia Installation Details Typical Eaves Details K16 Fascia & 9mm Vented Soffit
Roofline Installation Details This is intended to provide you with a brief overview of the popular products in Kestrel s Roofline range, where they can be used and the main criteria for installation. Typical
More informationSwerve Rack CUSTOM RACKS AVAILABLE
CUSTOM RACKS AVAILABLE Swerve Rack The design of the Swerve mirrors the bike frame, thus providing superior bike support while making it easy to secure both the bike frame and wheel with a standard u-lock.
More informationStrong, lightweight composite structural I -Beam.
Strong, lightweight composite structural I -Beam. This Installation Guide has been prepared as a source of information to provide general guidance to consultants and in no way replaces the services of
More informationINTRODUCTION: Mashgoolat al wefaq trading specialized in metal trading and supplying of Expanded Metal & Plastering Accessories.
INTRODUCTION: Mashgoolat al wefaq trading specialized in metal trading and supplying of Expanded Metal & Plastering Accessories. Our range of quality products includes Block Ladders, Angle beads, Plaster
More informationDIRECT FASTENING SYSTEMS. Hilti. Outperform. Outlast.
DIRECT FASTENING SYSTEMS. Hilti. Outperform. Outlast. Powder-Actuated Tools and Fasteners DX - Light Tools DX 460-F8 Page 140 DX 460 MX Page 141 Consumables X-U, X-C, X-FS, X-HS U, X-M, X-EM Page 142 Insulation
More informationHex Head Bolt Set N - Includes lock nut. Used to connect male and female T connectors. Galvanized. 3/4" x 3-1/2". Standard Grade (f) Part #24279
a Standard Grade (3/16 ) and Commercial Grade(1/4 ) Tie Down Is designed for use with 1-1/2" thick lumber (minimum width 6"). All hardware is mounted with 3/8" carriage bolts. All male and female dock
More informationOutback Gable CLEARSPAN ATTACHED
It is important to check your Local Government Authority requirements before the installation of your new Stratco Outback Flat Verandah. It is the builderʼs responsibility to ensure any existing structure
More informationNORTH AMERICAN STEEL INNOVATIVE STORAGE SOLUTIONS OUR S T R E N G T H IS OUR PEOPLE NORTH AMERICAN RACK
NORTH AMERICAN STEEL INNOVATIVE STORAGE SOLUTIONS OUR S T R E N G T H IS OUR PEOPLE NORTH AMERICAN RACK NORTH AMERICAN RACK North American Rollformed Racking is compatible with Redirack and all major Canadian
More informationPRODUCT INFORMATION MANUAL SECTION: 16 FIXED METAL AWNINGS FIXED METAL AWNINGS
FIXED METAL AWNINGS Fixed Metal Awnings BAHAMA Maximum Width Minimum Width Minimum projection Minimum Drop TS - Truss Support Maximum Overhang Minimum Overhang Unlimited 500mm TS=1601mm PS=2847mm PS=
More informationBest Barns USA Assembly Book
Best Barns USA Assembly Book Revised September 19, 2016 the Meadowbrook-R 16' x 10' Manufactured by Reynolds Building Systems, Inc. 205 Arlington Drive Greenville, PA 16125 724-646-3775 This manual is
More informationHow-To-build guide Garden shed
How-To-build guide Garden shed What you can build using this guide This guide will show you how to build a re-locatable garden shed. Before you begin building Contact your local territorial authority to
More information17.0 Printable Pages: Documents, Forms, And Current Drawings
17.0 Printable Pages: Documents, Forms, And Current Drawings 1. Table 5.1 Specification table for L-bent... 80 2. Table 6.1 Takeoff table for L-bent... 81 3. Table 5.2 Specification table for L-bent. 82
More informationWHY YOU SHOULD USE TUFFLOOR. components
Tuffloor DESIGN GUIDE WHY YOU SHOULD USE TUFFLOOR Strong and Easily Installed Tuffloor is a steel floor framing system designed for strength and ease of installation, and is an easy and economical alternative
More informationButt Two pieces of wood meeting with flat sides adjoining usually at right angles. Some type of connector is needed to prevent movement.
Wood Connections There are basically five different types of connectors: Interlocking (carpentry joints), Dowel, Metal Connectors, Special Formed Connectors and Adhesives. I Interlocking (Carpentry Joints)
More informationB. See Division 05 Section "Pipe and Tube Railings" for metal pipe and tube railings.
SECTION 055000 - METAL FABRICATIONS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following, applicable: 1. Miscellaneous steel framing and supports. 2. Prefabricated building columns. 3. Shelf
More information