Wood structures Copyright G G Schierle, press Esc to end, for next, for previous slide 1

Size: px
Start display at page:

Download "Wood structures Copyright G G Schierle, press Esc to end, for next, for previous slide 1"

Transcription

1 Wood structures Copyright G G Schierle, press Esc to end, for next, for previous slide 1

2 Wood Types: Balloon framing (rare) Platform framing Heavy timber framing Advantages: The only renewable material Warm, natural appearance Low energy required Easy to work, low cost Light weight = low seismic forces Challenges: Combustible Termite attacks Decays in variable humidity Limited height and floor area Wood structures Copyright G G Schierle, press Esc to end, for next, for previous slide 2

3 Rupture Length Rupture length is the maximum length a bar of constant cross section can be suspended without rupture under it s weight in tension (compression for concrete & masonry) Rapture length defines the efficiency of material as strength / weight ratio: R = F / γ where R = rupture length F = breaking strength γ = specific gravity (self weight) The graph data is partly based on a study of the Institute of Light weight Structures, University Stuttgart, Germany. Wood structures Copyright G G Schierle, press Esc to end, for next, for previous slide 3

4 Energy use For simple beam of Aluminum [Aluminium] Concrete [Béton] Steel [Acier] Wood [Bois] demonstrates wood requires much less energy! Wood Study by EPFL (Ecole Polytechnique Federale de Lausanne) Wood structures Copyright G G Schierle, press Esc to end, for next, for previous slide 4

5 Wood properties 1 Effect of fiber direction on shrinkage and deformation 2 Flat grain: strong patterns, large deformation 3 Vertical grain: fine patterns, small deformation 4 Plainsawing: flat grain, minimal waist 5 Quartersawing: vertical grain, some waist 6 Possible pattern: vertical grain,minimal waist 7 Possible pattern: vertical grain, minimal waist A Length shrinkage 0.2% 1 B Radial shrinkage 2.5% 1 C Tangential shrinkage 5% 1 D Center cut causes concave deformation E Vertical grain cut causes minimal distortion F Diagonal grain cut causes rhomboidal distortion. G Flat grain cut causes maximum distortion. 1 Typical softwood 20% moisture reduction Wood structures Copyright G G Schierle, press Esc to end, for next, for previous slide 5

6 Heavy timber framing Wood structures Copyright G G Schierle, press Esc to end, for next, for previous slide 6

7 Timber residence Architect: Thomas Herzog rods resist lateral load Gamble house Pasadena Architects: Green and Green Wood structures Copyright G G Schierle, press Esc to end, for next, for previous slide 7

8 Timber residence Architect: Marquies and Stoller Engineer: Eric Elsesser rods resist lateral load Wood structures Copyright G G Schierle, press Esc to end, for next, for previous slide 8

9 Heavy Timber A Joists support floor or roof deck B Planks supported by beams C Single beam require device to connect to column D Twin beams bolted to column allow pipes, etc. to pass between E Post F Cross-bracing resists lateral load Wood structures Copyright G G Schierle, press Esc to end, for next, for previous slide 9

10 Post, beam, joist framing Post / beam framing: 1,2 Flush joint Requires metal connector Ducts and pipes can t pass between beams 3,4 Twin beam / single post Simple bolted connection of twin beams to post Ducts and pipes can pass between beams 5,6 Single beam and twin post Less buckling strength than a single post Simple bolted joint of single beam to twin posts Joist framing: 1,2 Flush joists require joist hangers 3-6 Top joists Simple framing Allows ducts between joists Expose beams below ceiling Wood structures Copyright G G Schierle, press Esc to end, for next, for previous slide 10

11 Post cap and base Post cap and base are essential for seismic safety To prevent beam from slipping off the post 1 Post cap 2 Post cap alternate 3 T-post-beam connector 4 L-post-beam connector 5 Post base with u-strap 6 Post base alternate Wood structures Copyright G G Schierle, press Esc to end, for next, for previous slide 11

12 Beam anchor Beam anchors are essential for seismic safety to prevent beam from slipping off the wall 1 Steel bracket bolted to beam, anchor bolt into wall 2 Anchor bolt directly through beam into wall 3 Axon of 1 above 4 Axon of 2 above 5 Bracket with 2 anchor bolts 6 Concealed T-bracket Wood structures Copyright G G Schierle, press Esc to end, for next, for previous slide 12

13 Beam support Beam hangers are required fro flush framing 1 Beam hanger with single flange 2 Beam hanger with twin flange 3 Heavy-duty twin beam hanger 4 Heavy-duty single beam hanger 5 Concealed beam hanger 6 Angle brackets secure beam to wall plate Wood structures Copyright G G Schierle, press Esc to end, for next, for previous slide 13

14 Balloon framing Balloon framing, invented by George W Snow, was first used for St. Mary's Church, built 1833 in Chicago. Balloon framing was a pejorative term, used by critics to make fun of its light weight. Platform framing, which evolved from balloon framing, replaced it largely today. Yet less vertical shrinkage than platform framing makes balloon framing preferred for veneer walls. Studs extend two stories with blocking as fire stops. Floor joists, usually 2x12 at 16 in, rest on 1x4 ribbons. Plywood or other wall sheathing, resists lateral load. Plywood also provides floor and roof decks. Blocking of joists resist rotation and supports plywood edges to transfer shear. Joist and stud spacing may also be 12 or 24 in. Plywood and gypsum board panels 48 (4 ) wide match 2, 3, or 4 joist or stud spaces of 24, 16 or 12, respectively. A Joist at 16", alternately 12 or 24" B Blocking under plywood panel edges C Double plates overlap at corners and splices D Stud, 2x6, spaced 16", alternately 24" E Fire blocking at floor level F Ribbon, 1x4, support floor joists G Anchor bolt, 1/2 at 4 max. H Sole plate, min. 6 above soil I Concrete foundation Wood structures Copyright G G Schierle, press Esc to end, for next, for previous slide 14

15 Platform framing Platform framing, which derived from and largely replaced balloon framing tody, is widely used for low-rise residential structures, due to economy & flexibility. 2x4 16 reach from platform to platform. Double top plates overlap at corners and splices. Plywood sheathing, nailed to studs, resists lateral loads. Joists, usually 16 support plywood platforms. Blocking resists joist buckling and supports plywood panel edges to transfer shear. Plywood and gypsum board panels 48 (4 ) wide match 2, 3, or 4 joist or stud spaces of 24, 16 or 12, respectively. Maximum height allowed: 3 stories (4 with fire sprinklers) A Joists, 2x12 or 16", 24, or 12 o.c.. B Blocking C Double top plates overlap at corners and splices D Studs, 2x4, 2x6, or 16 or 24 o. c. E Bottom plates F Double plates supporting joists G Anchor bolt, 6 o. c. H Sole plate, min. 6" above soil I Concrete foundation Wood structures Copyright G G Schierle, press Esc to end, for next, for previous slide 15

16 Wall intersections Wall intersections are joined by overlapping twin top plates nailed together with two face nails. Multiple studs provide nailing surfaces for sheathing. 1 Wall corner 2 Wall intersection between studs 3 Wall intersection at studs A Double top plate B Stud C Top plates at corner joined with two 16d face nails D 1x6 let-in braces before sheathing is applied E Metal braces before sheathing is applied F Corner studs provide nailing surface for sheathing G Sole plate H Anchor bolt spaced maximum 4 ft I Blocking and shim J Double studs provide nailing surface for sheathing Wood structures Copyright G G Schierle, press Esc to end, for next, for previous slide 16

17 Wall openings Wall openings have a header supported by trimmers. Small opening headers may be twin joists. Large openings may need a beam header. Openings extending to the ceiling require joist hangers. Metal straps join header to rim joist to transfer lateral load to shear walls. 1 Conventional door and window openings 2 Window openings flush with floor or roof joists A Header, twin joist or single beam B Trimmer supports header C Four 10d nails join header to stud D Twin sill plates E Cripple studs F Header beam flush with joists G Joist hanger H Metal straps connect header to rim joist to transfer I Post lateral load to shear walls Wood structures Copyright G G Schierle, press Esc to end, for next, for previous slide 17

18 Joist bracing Bridging resists joist buckling only Blocking resists joist buckling and transfers shear at plywood panel edges. Blocking doubles allowable plywood diaphragm shear. Tongue-and-groove plywood with nails through tongue transfers shear without blocking. Floor openings usually have twin joists around edges, face-nailed with 16d nails at 6 in to transfer shear. For large openings beams are better than twin joists. 1 Bridging 2 Blocking 3 Floor opening A Bridging resists rotation of joists only B Double plate overlap C Blocking resists joist buckling transfers shear D Twin joists at floor opening E Joist hangers Wood structures Copyright G G Schierle, press Esc to end, for next, for previous slide 18

19 Joist and truss joist Standard joists of solid soft wood are most common. Yet increasing scarcity of wood and a need for longer spans prompted development of prefab joists. Various joists, made from economical scrap, provide for longer spans and consistent quality. These joists have depths of nominally 5 up to 24 in. For long spans, truss joists are used. 1 Joist of solid wood 2 Composite particle board joist with laminated flange 3 Laminated joist 4 I-joist of plywood web and laminated flanges 5 I-joist of plywood web and double flanges 6 Box joist of double plywood web and single flanges 7 Truss joist of metal web bars bolted to double flanges 8 Truss joist with bars joined by metal gusset gang-nails 9 Truss joist of twin flange bars nailed to single web bar Wood structures Copyright G G Schierle, press Esc to end, for next, for previous slide 19

20 Roof truss Roof trusses usually have bars joined by gusset plates or by bolt and split ring. Gusset plate trusses have all bars in the same plane. Split ring trusses need bars to overlap at joints. Closely spaced trusses usually support directly a deck of plywood or planks without purlins. Widely spaced trusses require purlins to support decks. 1 Truss with gusset plate joints 2 Gusset plate for nails on both sides of truss 3 Gang-nail gusset plate on both sides of truss 4 Truss with bolt and split ring joints 5 Split-ring joint A B Split ring resists shear stress Bolt ties split-ring assembly together Wood structures Copyright G G Schierle, press Esc to end, for next, for previous slide 20

21 Plywood diaphragm Plywood diaphragms nailed to joists transfer lateral load to shear walls. Blocking between joists transfers shear from panel to panel. 1-2 Continuing joints normal to load require few nails. 3-4 Continuing joints parallel to load require more nails 5-6 Continuing joints both ways require most nails 7 Case 1 axon 8 Blocking, spaced 8 ft rather than 4 ft 9 Blocking at panel edges transfers shear 10 Tongue-and-grove joint, nailed at 7" transfers shear A Assumed load direction B Joists C Blocking D Plywood panels E Nail Wood structures Copyright G G Schierle, press Esc to end, for next, for previous slide 21

22 Plywood shear wall Plywood must be nailed to wood framing to resist lateral shear of wind and seismic forces. 1. Plywood shear wall 2. Plywood shear wall with horizontal boards 3. Max. shear wall aspect ratio 1:3.5 (Los Angeles 1:2 since Northridge EQ) 4. Plywood nail spacing A Blocking transfers shear B Nail C Plywood sheathing D Hold-down resists overturning E Nail spacing at panel edges (max. 6 ) F Nail spacing at other studs (max. 12 ) Wood structures Copyright G G Schierle, press Esc to end, for next, for previous slide 22

23 Wall straps and hold-downs Wall straps splice drag struts that transfer lateral load to shear walls. They may also secure upper floor shear walls to shear walls below to resist overturning. Hold-downs tie both ends of shear walls to footing to resist overturning 1 Metal strap 1 ties shear wall to lower floor to resist overturning 2 Metal strap in drag strut transfers lateral load to shear walls 3 Twin hold-downs 1 Tie shear wall to lower floor to resist overturning 4 Hold-down 1 Ties shear wall to the foundation to resist overturning 1 Required at both ends of shear walls Wood structures Copyright G G Schierle, press Esc to end, for next, for previous slide 23

24 Metal anchors Metal anchors connect roofs and floors to shear walls. Floors and roofs typically are nailed to blocking or rim joists that rest on twin top plates. Plywood panels usually reach only the top plates and leave a gap in shear transfer from floor to floor. Metal anchors provide the missing connection. Full height plywood panels need no metal anchors. 1 Exterior wall with metal anchors 2 Interior wall with metal anchors 3 Exterior wall without need for metal anchors 4 Interior wall without need for metal anchors A Blocking (or rim joist) at exterior shear wall B Metal anchor with 12-8d nails resists 500# shear C Extend of plywood panel to top of plate only D Blocking of interior shear wall E Metal anchor F Possible shear wall above floor G Plywood panel nailed to top of blocking or rim joist provides load pass without need for metal anchors H Floor joist I Plywood nailed to top joist requires no metal anchor Wood structures Copyright G G Schierle, press Esc to end, for next, for previous slide 24

25 Joist support Beams may support floor and roof joists two ways, flush support and top support. Flush support joins beam and joist with flush top Requires joist hangers Is more labor intensive Provides narrow joist support Conceals beam within floor depth Prevents ducts and pipes to pass between joists Top support joist supported on top of beam Needs no hardware to connect Is less labor intensive to install Provides wider support Exposes the beam below the ceiling; Allows ducts and pipes to pass between joists 1 Flush support with joist hanger 2 Flush support on steel beam with wood ledger 3 Flush support with double flange joist hanger 4 Wood ledger on bottom flange of steel beam 5 Top support overlapped on wood beam 6 Top support overlapped on wood ledger of steel beam Wood structures Copyright G G Schierle, press Esc to end, for next, for previous slide 25

26 Asymmetric support Joists on only one side of beam rotate the beam. Such beams should be restraint against rotation 1 Asymmetrical joist support rotates the beam 2 Hold-down ties beam to joist to resist rotation 3 Metal strap ties beam to joist to resist rotation Wood structures Copyright G G Schierle, press Esc to end, for next, for previous slide 26

27 Fire and sound rating 1 One hour fire rated wall 2 Two-hour fire rated wall 3 One hour fire rated floor 4 Two-hour fire rated floor 5 Sound rated wall of about 60 STC 6 Sound rated floor of about 60 IIC and 60 STC A Wall studs. B Gypsum board, 5/8" (16 mm), type X (fire rated) C Gypsum board, 2 layers 5/8" type X each side D Cellular concrete, 1.5 E Plywood sub-floor, 5/8 or 3/4 F Joists. G Plywood sub floor, 1" (25 mm) H Gypsum boards, 2 layers 5/8" type X I Resilient furring channels, spaced 24" J Double studs with 1" sound gap K Glass fiber insulation L Cellular concrete, 1.5" with carpet and pad floor M Plate to transfer shear over sound gap in plywood N Sound gap in plywood to prevent sound transmission IIC = Impact Insulation Class STC = Sound Transmission Class Wood structures Copyright G G Schierle, press Esc to end, for next, for previous slide 27

28 Wall erection Plywood shear wall resists lateral wind and seismic loads Woodframe house Wood structures Copyright G G Schierle, press Esc to end, for next, for previous slide 28

29 Town homes, Beverly Hills Architect: G G Schierle Engineer: W C Minn The wood platform framing over concrete garage is common for residential buildings. CMU shear walls at garage, plywood shear walls above. The concrete slab, 12 thick for 30 span, provides required 3-hour fire rating between garage and residential units Wood structures Copyright G G Schierle, press Esc to end, for next, for previous slide 29

30 Terrace Homes, Hermosa Beach Architect: Schierle Engineer: Robert Metha Wood structures Copyright G G Schierle, press Esc to end, for next, for previous slide 30

31 Terrace Homes Hermosa Beach The design philosophy to adapt building to the site not site to building, minimized grading and retaining walls. A 14/24 ft module allows shear walls aligned vertically. Each two-story unit has two terraces for outdoor living. The terraces provide open space that allowed 33 units at a lot zoned for only 25 units by conventional planning. Wood structures Copyright G G Schierle, press Esc to end, for next, for previous slide 31

32 Terrace Homes Hermosa Beach Wood structures Copyright G G Schierle, press Esc to end, for next, for previous slide 32

33 Wood structures Copyright G G Schierle, press Esc to end, for next, for previous slide 33

34 Park City Village Wood structures Copyright G G Schierle, press Esc to end, for next, for previous slide 34

35 Wood structures Copyright G G Schierle, press Esc to end, for next, for previous slide 35

36 Wood structures Copyright G G Schierle, press Esc to end, for next, for previous slide 36

Sections & Details VOCABULARY

Sections & Details VOCABULARY 1 Sections & Details VOCABULARY 1 ROOF FRAMING DETAIL RIDGE BOARD SHEATHING SHINGLES WEB FASCIA RAFTER (chord) SOFFIT SHEATHING STUD INSULATION DOUBLE TOP PLATE CEILING JOIST 2 FOUNDATION DETAIL STUD SHEATHING

More information

3.1 General Provisions

3.1 General Provisions WOOD FRAME CONSTRUCTION MANUAL 107 3.1 General Provisions 3.1.1 Prescriptive Requirements The provisions of this Chapter establish a specific set of resistance requirements for buildings meeting the scope

More information

Sections & Details. WOOD SILL and FLOOR CONSTRUCTION NOTES

Sections & Details. WOOD SILL and FLOOR CONSTRUCTION NOTES 2 Sections & Details WOOD SILL and FLOOR CONSTRUCTION NOTES 1 Commonly Used Lumber Common LENGTHS include: 8, 10, 12, 14, 16 NOMINAL SIZES 2 x 4 2 x 6 2 x 8 2 x 10 2 x 12 ACTUAL SIZES 1 ½ x 3 ½ 1 ½ x 5

More information

Garage Design Guide. October 2018

Garage Design Guide. October 2018 Garage Design Guide October 2018 The Corporation of the Township of Hamilton 8235 Majestic Hills Drive, P.O. Box 1060, Cobourg Ontario K9A 4W5 Tel: 905-342-2810 Fax: 905-342-2818 Email: Tim Jeronimus (Chief

More information

Unit 9. Wall and Ceiling Framing

Unit 9. Wall and Ceiling Framing Unit 9 Wall and Ceiling Framing Wall construction Wall framing includes the assembly of horizontal and vertical members that make up exterior walls and interior partitions. Theses walls support the ceilings

More information

2x6. 2x8. 2x10. Size. 2-2x10 8'-5" w/ 2 NJ 7'-3" w/ 2 NJ

2x6. 2x8. 2x10. Size. 2-2x10 8'-5 w/ 2 NJ 7'-3 w/ 2 NJ 1 Rafter Size Spacing Allowable span 24" 11'-9" 24" 2x6 14'-1" 2x4 12" 15'-6" 12" 24" 14'-10" 24" 2x8 18'-2" 2x6 12" 20'-5" 12" 24" 18'-2" 24" 2x10 22'-3" 2x8 12" 25'-8" 12" 24" 21'-0" 24" 2x12 25'-9"

More information

SECTION: 15 ZONING RULE LOT AREA 6134 S.F S.F. BUILDING AREA (FOOTPRINT) LOT COVERAGE 20.2% 24.86' FRONT YARD SIDE YARD 8.

SECTION: 15 ZONING RULE LOT AREA 6134 S.F S.F. BUILDING AREA (FOOTPRINT) LOT COVERAGE 20.2% 24.86' FRONT YARD SIDE YARD 8. PROPOSED 1ST FLOOR PROPOSED 2ND FLOOR Anthony Hatziioannou Architect, P.C. EXISTING 1ST FLOOR ZONING CALCULATION JURISDICTION: TOWN OF OYSTER BAY SECTION: 15 BLOCK: 71 LOT: ZONE: RESIDENCE R1-7 PERMITTED

More information

UNDER-FLOOR PLAN SCALE: 3/16"=1'-0"

UNDER-FLOOR PLAN SCALE: 3/16=1'-0 KEY: NOTE # SEE PLAN NOTES OR DETAIL NOTES FOR CORRESPONDING # 5 8 " DIAMETER ANCHOR BOLTS X "L90" "LTP" "HORIZONTAL 5 8" DIAMETER ANCHOR BOLT" '0" INDICATES # OF ANCHOR BOLTS OR "UFP10" 1'10" "L90" "HDU5"

More information

T-BRACE / I-BRACE DETAIL WITH 2X BRACE ONLY

T-BRACE / I-BRACE DETAIL WITH 2X BRACE ONLY August 10, 2010 T-BRACE / I-BRACE DETAIL WITH 2X BRACE ONLY ST - T-BRACE 2 R MiTek Industries, Chesterfield, MO Page 1 of 1 Note: T-Bracing / I-Bracing to be used when continuous lateral bracing is impractical.

More information

FASTENERS BUILDING DEPARTMENT

FASTENERS BUILDING DEPARTMENT FASTENERS BUILDING DEPARTMENT 952-446-1660 WWW.CITYOFMINNETRISTA.COM This handout is intended only as a guide and is based in part on the 2015 Minnesota Residential Code, Minnetrista City ordinances, and

More information

Lateral Support. Decks over 24 above grade require lateral support* *Exceptions to be discussed later

Lateral Support. Decks over 24 above grade require lateral support* *Exceptions to be discussed later Lateral Support Decks over 24 above grade require lateral support* *Exceptions to be discussed later Decking Types of Decking: -2x4s & 2x6s -five quarter span rated decking boards -Wood plastic composite

More information

eb^sv=qfj_bo UNIVERSITY OF WISCONSIN - STOUT COLLEGE OF SCIENCE TECHNOLOGY ENGINEERING & MATHEMATICS Architectural Technology AEC 233

eb^sv=qfj_bo UNIVERSITY OF WISCONSIN - STOUT COLLEGE OF SCIENCE TECHNOLOGY ENGINEERING & MATHEMATICS Architectural Technology AEC 233 eb^sv=qfj_bo UNIVERSITY OF WISCONSIN - STOUT COLLEGE OF SCIENCE TECHNOLOGY ENGINEERING & MATHEMATICS Architectural Technology AEC 233 Dr. Jason E. Charalambides fkqolar`qflk Heavy timber construction consists

More information

Introducing AJSTM INSTALLATION GUIDE USA. 8 th Edition USA

Introducing AJSTM INSTALLATION GUIDE USA. 8 th Edition USA The SIMPLE FRAMING SYSTEMSM INSTALLATION GUIDE USA for Floors This Installation Guide is intended to provide general information for the designer and end-user. For further information, please refer to

More information

APPLICATION FOR A BUILDING PERMIT

APPLICATION FOR A BUILDING PERMIT APPLICATION FOR A BUILDING PERMIT City of San Jacinto 595 S. San Jacinto Ave San Jacinto CA 92583 95.487.7330 fax 95.654.9896 Must print legibly, submit (3) sets of building and plot plans. Fill out all

More information

GlasRoc Sheathing Type X

GlasRoc Sheathing Type X Wall / Fire-Rated Systems 3-5/8" (92 mm) Steel Studs ProRoc Steel Stud System 3-5/8" (92 mm) Steel Track 3-1/2" (89 mm) Glass Fiber or Mineral Wool Insulation GlasRoc Sheathing Type X UL Design U465 Cavity

More information

WOODEN BUILDINGS 6.1 INTRODUCTION 6.2 TYPICAL DAMAGE AND FAILURE OF WOODEN BUILDINGS. Chapter 6

WOODEN BUILDINGS 6.1 INTRODUCTION 6.2 TYPICAL DAMAGE AND FAILURE OF WOODEN BUILDINGS. Chapter 6 Chapter 6 WOODEN BUILDINGS 6.1 INTRODUCTION Wood has higher strength per unit weight and is, therefore, very suitable for earthquake resistant construction. But heavy cladding walls could impose high lateral

More information

Fastener Schedule. a, b, c. FASTENER Roof 3-8d (2 1 / ) / ) 3-10d. 3-10d ( ) 3-16d box nails. (3 1 2 toe nails on one side

Fastener Schedule. a, b, c. FASTENER Roof 3-8d (2 1 / ) / ) 3-10d. 3-10d ( ) 3-16d box nails. (3 1 2 toe nails on one side ITEM 1 DESCRIPTION OF BUILDING ELEMENTS Blocking between joists or rafters to top plate, toe 2 Ceiling joists to plate, toe 3 4 5 6 Ceiling joists not attached to parallel rafter, laps over partitions,

More information

SECTION R507 DECKS DECKING LEDGER BOARD BEAM. FOOTING BEAM SPAN CANTILEVER For SI: 1 inch = 25.4 mm FIGURE R507.2 DECK CONSTRUCTION

SECTION R507 DECKS DECKING LEDGER BOARD BEAM. FOOTING BEAM SPAN CANTILEVER For SI: 1 inch = 25.4 mm FIGURE R507.2 DECK CONSTRUCTION SECTION R507 DECKS R507.1 Application. The provisions of this section shall provide prescriptive requirements for the design and construction of all uncovered, wood-framed, single-span exterior decks.

More information

Glulam Connection Details

Glulam Connection Details T E C H N I C A L N O T E Glulam Connection Details Note: This version is superseded by a more current edition. Check the current edition for updated design and application recommendations. ENGINEERED

More information

3. Are component and cladding design pressures consistent with ASCE 7 for the wind speed and exposure category (ASCE 7 Fig. 6-3)?

3. Are component and cladding design pressures consistent with ASCE 7 for the wind speed and exposure category (ASCE 7 Fig. 6-3)? Mobile County Public Works Residential Plan Reviewers Checklist For Structural Requirements of Wood Framed Residences Recommendation: Permit as Noted Revise Plans and Resubmit MCPW Ref. No. Design Criteria:

More information

ROOF-CEILING CONSTRUCTION

ROOF-CEILING CONSTRUCTION CHAPTER 8 ROOF-CEILING CONSTRUCTION SECTION R801 GENERAL R801.1 Application. The provisions of this chapter shall control the design and construction of the roof-ceiling system for all buildings. R801.2

More information

nineteen Wood Construction 1 and design APPLIED ARCHITECTURAL STRUCTURES: DR. ANNE NICHOLS FALL 2016 lecture STRUCTURAL ANALYSIS AND SYSTEMS ARCH 631

nineteen Wood Construction 1 and design APPLIED ARCHITECTURAL STRUCTURES: DR. ANNE NICHOLS FALL 2016 lecture STRUCTURAL ANALYSIS AND SYSTEMS ARCH 631 APPLIED ARCHITECTURAL STRUCTURES: STRUCTURAL ANALYSIS AND SYSTEMS DR. ANNE NICHOLS FALL 2016 lecture nineteen wood construction and design Wood Construction 1 Timber Construction all-wood framing systems

More information

Featuring TJ Rim Board and TimberStrand LSL

Featuring TJ Rim Board and TimberStrand LSL #TJ-8000 SPECIFIER S GUIDE TRUS JOIST RIM BOARD Featuring TJ Rim Board and TimberStrand LSL Multiple thicknesses, grades, and products to cover all your rim board needs 1¼" Thickness matches lateral load

More information

Joshua Woodsman

Joshua Woodsman CONSTRUCTION GUIDE of one of our design Please Note This electronic document is protected by the identifier against unauthorized dissemination on the Internet. Before building any structure make sure you

More information

STRUCTURAL WOOD DETAILING IN CAD FORMAT

STRUCTURAL WOOD DETAILING IN CAD FORMAT STRUCTURAL WOOD DETAILING IN CAD FORMAT STRUCTURAL WOOD DETAILING IN CAD FORMAT K.A. ZAVAT lnm51springer Science+Business ~---Media, LLC Copyright 1993 by Springer Science+Business Media New York Originally

More information

JOIST DETAILS Plate nail, 16d (0.15" x 1 ") at 1 on-center Blocking panel: 1 1 8" TJ Rim Board, 1 1 TimberStrand SL or TJI joist Toe nail, 10d (0.11" x ") at on-center A1 CS BEAM DETAILS L1 eb stiffener

More information

TYPICAL PATIO COVERS. OWNER: ADDRESS: PHONE:

TYPICAL PATIO COVERS.  OWNER: ADDRESS: PHONE: City of Aliso Viejo Building Division 12 Journey, Suite 100 Aliso Viejo, CA 92656 (949)425-2540 Fax (949)425-3899 www.cityofalisoviejo.com TYPICAL PATIO COVERS 111 I. GENERAL Patio covers are one-story,

More information

MAT105: Floor Framing

MAT105: Floor Framing MAT105: Copyright 2007 American Forest & Paper Association, Inc. Because the common applications for wood framing are in residential construction, the details of this program will be based on the IRC which

More information

Wall and Ceiling Framing

Wall and Ceiling Framing Student Edition Developed by the Curriculum and Instructional Materials Center for the Trade and Industrial Education Division Oklahoma Department of Career and Technology Education 00-00000 TI3674 Copyright

More information

602.4, TABLE 602.4, , , , , , , , , TABLE

602.4, TABLE 602.4, , , , , , , , , TABLE 602.4, TABLE 602.4, 602.4.1, 602.4.2, 602.4.3, 602.4.4, 602.4.5, 602.4.9, 2304.11, 2304.11.1, TABLE 2304.11.1.1, 2304.11.2, 2304.11.3, 602.4.8, 602.4.8.2, 602.4.8.1, 602.4.6, 602.4.6.2, 602.4.6.1, 2304.11.4,

More information

A Shell construction

A Shell construction A Shell construction A 4/2012 Content 1 BASE AND WALL ANCHORING 1.1 Base with mortar bed 1.2 Base with sill plate 1.3 Base with raised sill plate 1.4 Concrete base (mortar bed) 1.5 Concrete base (sill

More information

ESCONDIDO FIRE DEPT TRAINING MANUAL Section Truck Module Page 1 of 9 Ventilation Overview Revised

ESCONDIDO FIRE DEPT TRAINING MANUAL Section Truck Module Page 1 of 9 Ventilation Overview Revised Truck Module Page 1 of 9 INTRODUCTION Each firefighter must have a thorough knowledge of the proper methods used to ventilate a structure. Ventilation itself does not put out fires! However, effective

More information

GLOSSARY OF TERMS SECTION 8

GLOSSARY OF TERMS SECTION 8 GLOSSARY OF TERMS SECTION 8 Anchor Bolt Angle Base Plate Bay Blocking CCB Centerline Chord Cladding Clip Closure Strip An A-307 steel bolt embedded in the concrete footing to anchor the base plate of the

More information

F I X I N G B R O C H U R E

F I X I N G B R O C H U R E F I X I N G B R O C H U R E Joist Hangers Joist Hangers on Steel Beams Fixing Masonry Hangers Speedy Joist Hangers Lateral Restraint Straps Roof Tie Down Straps Herring Bone Joist Strut Bat 'U' Nail Plate

More information

KS SERIES - VERTICAL INSTALLATION

KS SERIES - VERTICAL INSTALLATION CS-DS-01-KSV CS DISCLAIMER CS-PJ-01-KSV KS42SL EXPANDED PANEL JOINT CS-PJ-02-KSV KS42SL ENGAGED PANEL JOINT CS-PJ-03-KSV KS45SL EXPANDED PANEL JOINT CS-PJ-04-KSV KS45 FLAT ENGAGED PANEL JOINT CS-PJ-05-KSV

More information

Beam & Header Technical Guide. LP SolidStart LVL. 2900F b -2.0E. U.S. Technical Guide U.S. TECHNICAL GUIDE

Beam & Header Technical Guide. LP SolidStart LVL. 2900F b -2.0E. U.S. Technical Guide U.S. TECHNICAL GUIDE U.S. Technical Guide U.S. TECHNICAL GUIDE LP SolidStart LVL & Header Technical Guide 2900F b -2.0E Please verify availability with the LP SolidStart Engineered Wood Products distributor in your area prior

More information

Exterior Wall Fastener Schedule

Exterior Wall Fastener Schedule City of Republic Community Development Department Exterior Wall Fastener Schedule REVISION DATE: JANUARY 2017 Design and construction (2012 IRC Section R602.3): Exterior walls of wood frame construction

More information

APA Performance Rated Rim Boards

APA Performance Rated Rim Boards D a t a F i l e APA Performance Rated Rim Boards A Rim Board is the wood component that fills the space between the sill plate and bottom plate of a wall or, in second floor construction, between the top

More information

MAT106: Wall Framing. AMERICAN FOREST & PAPER ASSOCIATION American Wood Council Engineered and Traditional Wood Products

MAT106: Wall Framing. AMERICAN FOREST & PAPER ASSOCIATION American Wood Council Engineered and Traditional Wood Products MAT106: This portion of the program will address the code requirements for wall framing, although we won t address bracing in this section. The program contains a separate bracing section. 1 FASTEN PLATES

More information

Trusted ICC ES PASLODE, Evaluation. report, or as to any. ICC-ES Evaluation

Trusted ICC ES PASLODE, Evaluation. report, or as to any. ICC-ES Evaluation 0 ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.orgg Most Widely Accepted and Trusted ESR 3072 Reissued 09/2018 Revised 10/2018 This report is subject to renewal 09/2020.

More information

Acceptable Standards of Domestic Construction

Acceptable Standards of Domestic Construction Truss or Rafter Roof Batten Triple grip fastener (for roof trusses) Foil lined Insulation blanket Top plate Sprocket Brick tie Top plate strapping at 1200mm max. cts. Note: Holding down straps should be

More information

Building Science. Design Issues. Design Issues. Advanced Framing. Stack Framing Concept. Advanced Framing. Use Less Stuff Better

Building Science. Design Issues. Design Issues. Advanced Framing. Stack Framing Concept. Advanced Framing. Use Less Stuff Better SUPPLY CENTRAL RETURN WALL 1 TW3046 TW3046 TW3046 TW3046 3068 UP SUPPLY TW3046 TW3046 16Õ-2Ó * 19Õ-2Ó * 16Ó 16Ó 16Ó 16Ó Joseph Lstiburek, Ph.D., P.Eng Building Science Advanced Framing Use Less Stuff Better

More information

Deck Evaluation Checklist

Deck Evaluation Checklist Date: Reported By: Project Name/Client: Year Deck was Built: I. Stairs A. Not Applicable B. Are there any visible signs of cracks, decay or over-notching? No Yes 1. If yes, where? C. Stairway width: (Hint:

More information

Connections in CLT Assemblies

Connections in CLT Assemblies Creating forest sector solutions www.fpinnovations.ca Connections in CLT Assemblies Cross Laminated Timber Symposium Vancouver, BC February 8-9, 2011 M. Mohammad Building Systems Wood Products Division

More information

With Illustrations, Drawings & Step By Step Details. Click Here To Download 12,000 Shed Plans. 1 P a g e Download 12,000 More Shed Plans

With Illustrations, Drawings & Step By Step Details. Click Here To Download 12,000 Shed Plans. 1 P a g e Download 12,000 More Shed Plans With Illustrations, Drawings & Step By Step Details Click Here To Download 12,000 Shed Plans 1 P a g e Download 12,000 More Shed Plans Table of Contents OVERVIEW... 3 MATERIALS & CUTTING LISTS... 4 DRAWINGS,

More information

Steel Strong-Wall Shearwall Installations

Steel Strong-Wall Shearwall Installations Steel Strong-Wall Shearwall Installations Connector Training for Contractors Series Name: (800) 999-5099 www.strongtie.com Industry Terms Steel Strong-Wall Every day we work hard to earn your business,

More information

Materials. Description Quantity/Size Material Foundation Drainage material. 1.4 cu. yd. Compactible gravel

Materials. Description Quantity/Size Material Foundation Drainage material. 1.4 cu. yd. Compactible gravel This 8 12-ft. shed features a simple gable roof, double doors, and side and rear windows for natural lighting. With full-height walls and doors, there's ample room for storing large items or creating a

More information

Drywall, Wood and Truss Uplift

Drywall, Wood and Truss Uplift Drywall, Wood and Truss Uplift Drywall (gypsum board) has to: provide rigidity provide aesthetics provide fire protection not leak air Concerns Wood moves. Drywall does not move. Interesting problem. The

More information

Nailed Structural-Use Panel and Lumber Beams

Nailed Structural-Use Panel and Lumber Beams D A T A F I L E Nailed Structural-Use Panel and Lumber Beams When roof load or span requirements are too great to allow use of commonly available dimension lumber or timbers, a box beam constructed of

More information

IRC 2015 Code Compliant Wood Framed Residential Details. Incorrect Installations of Connectors with code references and remedies, discussion.

IRC 2015 Code Compliant Wood Framed Residential Details. Incorrect Installations of Connectors with code references and remedies, discussion. IRC 2015 Code Compliant Wood Framed Residential Details Incorrect Installations of Connectors with code references and remedies, discussion. You can help to avoid this, by being diligent with inspections.

More information

Building for High Wind Resistance in Light-Frame Wood Construction

Building for High Wind Resistance in Light-Frame Wood Construction Building for High Wind Resistance in Light-Frame Wood Construction DESIGN GUIDE Meeting the Challenge of High Wind Design Designing a structure to withstand the devastating forces of tornados is one of

More information

Grand Garden Chalet 6X3 Assembly Manual

Grand Garden Chalet 6X3 Assembly Manual Revision #8 November 1, 2009 Grand Garden Chalet 6X3 Assembly Manual Thank you for purchasing a Grand Garden Chalet. Please take the time to identify all the parts prior to assembly. Please use Safety

More information

Timber to Timber - Timber to Concrete - Timber to Steel

Timber to Timber - Timber to Concrete - Timber to Steel 01/2017 TIMBER CONNECTORS NOT TO BE USED IN EXTERIOR SITUATIONS Stainless Steel alternatives are available where stated Timber to Timber - Timber to Concrete - Timber to Steel MiTek manufactures and markets

More information

Best Barns USA. Assembly Book. 12'x 16' the Millcreek. Revised September 19, 2017

Best Barns USA. Assembly Book. 12'x 16' the Millcreek. Revised September 19, 2017 Assembly Book Best Barns USA Revised September 19, 2017 the Millcreek 12'x 16' Manufactured by Reynolds Building Systems, Inc 205 Arlington Drive Greenville, PA 16125 This manual is copyrighted Under the

More information

TRUS JOIST RIM BOARD. Featuring TJ Rim Board and TimberStrand LSL. Multiple thicknesses, grades, and products to cover all your rim board needs

TRUS JOIST RIM BOARD. Featuring TJ Rim Board and TimberStrand LSL. Multiple thicknesses, grades, and products to cover all your rim board needs #TJ-8000 SPECIFIER S GUIDE TRUS JOIST RIM BOARD Featuring TJ Rim Board and Multiple thicknesses, grades, and products to cover all your rim board needs 1¼" Thickness matches lateral load capacity of 2x

More information

HOW TO BUILD A 12X8 SHED

HOW TO BUILD A 12X8 SHED HOW TO BUILD A 12X8 SHED With Illustrations, Drawings & Step By Step Details Note: This is a sample plan from RyanShedPlans. All other plans in our collection goes indepth with more details, more instructions,

More information

With Illustrations, Drawings & Step By Step Details. Click Here To Download 12,000 Shed Plans. 1 P a g e H O W B U I L D S H E D.

With Illustrations, Drawings & Step By Step Details. Click Here To Download 12,000 Shed Plans. 1 P a g e H O W B U I L D S H E D. With Illustrations, Drawings & Step By Step Details Click Here To Download 12,000 Shed Plans 1 P a g e H O W B U I L D S H E D. C O M Table of Contents OVERVIEW... 3 MATERIALS & CUTTING LISTS... 4 DRAWINGS,

More information

ROOF-CEILING CONSTRUCTION

ROOF-CEILING CONSTRUCTION CHAPTER 8 ROOF-CEILING CONSTRUCTION SECTION R801 GENERAL R801.1 Application. The provisions of this chapter shall control the design and construction of the roof-ceiling system for all buildings (see Section

More information

8x8 Shed Plans and Building Guide

8x8 Shed Plans and Building Guide Page 1 Legal 2018 Zac Spade & Christopher D. Brown. All Rights Reserved For information about special discounts available for bulk purchases, sales promotions, fundraising and educational needs, contact

More information

Expressed Hardwood Structures

Expressed Hardwood Structures Expressed Hardwood Structures Introduction This guide provides ideas and design information to assist in the development of expressed native timber structures in buildings. Basic information on how to

More information

Fine Homebuilding. Cottage Shed Plans

Fine Homebuilding. Cottage Shed Plans Fine Homebuilding Cottage Shed Plans 1 Front Elevation Designed with a cottage look, this small shed has clapboard siding on the front, a double door, a ramp to allow access for motorized yard equipment,

More information

Classic Connection Conundrums

Classic Connection Conundrums Classic Connection Conundrums Commonly Overlooked Wood Engineering Design Issues Michelle Kam-Biron, P.E., S.E. S.E.C.B Senior Director, Education American Wood Council COURSE DESCRIPTION The American

More information

Samples from

Samples from ANCHOR BOLT CORNER LOCATION 1-2x4 or 1-2x6=4 1/4" 1-3/4 or 1-3x6=5 1/4" 2-2x4 or 2-2x6=5 3/4",------------2-3x4 or 2-3x6=7 3/4" 1-4x6 or 1-6x6=8 1/4" 1-4x8 or 1-6x8=1 A" 1-4x10 or 1-6x10=12" I ------1er-----

More information

WoodWORKS Channeled Plank

WoodWORKS Channeled Plank CEILING&WALL SYSTEMS Between us, ideas become reality WoodWORKS Channeled Plank Assembly and Installation Instructions 1. General 1.1 Product Description WoodWorks Channeled acoustical ceiling and wall

More information

Wood Connections. Concepts of Well Designed Connections

Wood Connections. Concepts of Well Designed Connections Wood Connections Sam Hensen, P.E. Branch Engineering Manager Concepts of Well Designed Connections Must provide sufficient capacity to transfer loads to supporting members Utilize fastener spacing which

More information

ESR-2403 Reissued October 1, 2009 This report is subject to re-examination in one year.

ESR-2403 Reissued October 1, 2009 This report is subject to re-examination in one year. ICC-ES Evaluation Report ESR-403 Reissued October, 009 This report is subject to re-examination in one year. www.icc-es.org (800) 43-6587 (56) 699-0543 A Subsidiary of the International Code Council DIVISION:

More information

ROOF-CEILING CONSTRUCTION

ROOF-CEILING CONSTRUCTION CHAPTER 8 ROOF-CEILING CONSTRUCTION SECTION R801 GENERAL R801.1 Application. The provisions of this chapter shall control the design and construction of the roof-ceiling system for all buildings. R801.2

More information

ICBO Evaluation Service, Inc Workman Mill Road, Whittier, California / 16

ICBO Evaluation Service, Inc Workman Mill Road, Whittier, California / 16 ER-5736 Reissued September 1, 2002 ICBO Evaluation Service, Inc. 5360 Workman Mill Road, Whittier, California 90601 www.icboes.org Filing Category: FASTENERS Wood Hangers and Framing Anchors USP LUMBER

More information

12x12 Shed Plans and Building Guide

12x12 Shed Plans and Building Guide Page 1 Legal 2018 Zac Spade & Christopher D. Brown. All Rights Reserved For information about special discounts available for bulk purchases, sales promotions, fundraising and educational needs, contact

More information

8x12 SpaceMaker Garden Shed Assembly Manual

8x12 SpaceMaker Garden Shed Assembly Manual 8x12 SpaceMaker Garden Shed Assembly Manual Version #6 Revised June / 2007 Thank you for purchasing a 8x12 SpaceMaker Garden Shed. Please take the time to identify all the parts prior to assembly. Safety

More information

Best Barns USA. the Brookhaven 10' x 16' Assembly Book. revised March 23, 2016

Best Barns USA. the Brookhaven 10' x 16' Assembly Book. revised March 23, 2016 Best Barns USA Assembly Book revised March 23, 2016 the Brookhaven 10' x 16' Manufactured by Reynolds Building Systems, Inc. 205 Arlington Drive Greenville, PA 16125 724-646-3775 This manual is copyrighted.

More information

VERSA-LAM BCI INSTALLATION GUIDE LIMIT STATES DESIGN CANADA

VERSA-LAM BCI INSTALLATION GUIDE LIMIT STATES DESIGN CANADA INSTALLATION GUIDE VERSA-LAM BCI LIMIT STATES DESIGN CANADA The information in this document pertains use in the CANADA ONLY, Limit States Design. Refer the appropriate Specifier Guide US for use in the

More information

Walls. Add Strength and Water Resistance When Repairing Your. Replace damaged framing members when walls are open

Walls. Add Strength and Water Resistance When Repairing Your. Replace damaged framing members when walls are open Add Strength and Water Resistance When Repairing Your Walls Any home repair or remodeling work you do presents an opportunity to make your home fare better in the next storm. Whether you are just replacing

More information

Best Barns USA Assembly Book

Best Barns USA Assembly Book Best Barns USA Assembly Book Revised September 12, 2017 the Easton 12'x 16' Manufactured by Reynolds Building Systems, Inc. 205 Arlington Drive - Greenville, PA 16125 This manual is copyrighted. Under

More information

SECTION ROUGH CARPENTRY

SECTION ROUGH CARPENTRY SECTION 06100 PART I - GENERAL 1.01 DESCRIPTION A. Scope: Work of this Section shall include all materials and installation necessary to provide Rough Carpentry as shown and detailed on the Drawings and

More information

City of Long Beach Department of Development Services Building and Safety Bureau. Wood Frame Prescriptive Provisions For Residential Construction

City of Long Beach Department of Development Services Building and Safety Bureau. Wood Frame Prescriptive Provisions For Residential Construction City of Long Beach Department of Development Services Building and Safety Bureau Wood Frame Prescriptive Provisions For Residential Construction Information Bulletin BU-010 Eff: 01-01-2011 Rev: 07-05-2017

More information

BUILDING THE BASIC SHED. Step A: Build the Foundation & Floor Frame

BUILDING THE BASIC SHED. Step A: Build the Foundation & Floor Frame BUILDING THE BASIC SHED Step A: Build the Foundation & Floor Frame 1. Excavate the building site and add a 4" layer of compactible gravel. If desired, add an extension to the base for the optional wood

More information

6x6 Shed Plans and Building Guide

6x6 Shed Plans and Building Guide Page 1 Legal 2018 Zac Spade & Christopher D. Brown. All Rights Reserved For information about special discounts available for bulk purchases, sales promotions, fundraising and educational needs, contact

More information

VERSA-LAM. An Introduction to VERSA-LAM Products

VERSA-LAM. An Introduction to VERSA-LAM Products 44 VERSA-LAM An Introduction to VERSA-LAM Products VERSA-LAM is one of the strongest and stiffest engineered wood products approved in the UK. 241 302 356 406 VERSA-LAM products are excellent as floor

More information

ESR-1254 * DELETED BY CITY OF LOS ANGELES. Reissued April 1, 2006 This report is subject to re-examination in one year.

ESR-1254 * DELETED BY CITY OF LOS ANGELES.   Reissued April 1, 2006 This report is subject to re-examination in one year. ESR-1254 Reissued April 1, 2006 This report is subject to re-examination in one year. www.icc-es.org Business/Regional Office 5360 Workman Mill Road, Whittier, California 90601 (562) 699-0543 Regional

More information

Section Downloads. Terminology Outline. Industry Standards/ Publications. American Softwood Lumber Standard ANSI/TPI 1. Section 02: Terminology

Section Downloads. Terminology Outline. Industry Standards/ Publications. American Softwood Lumber Standard ANSI/TPI 1. Section 02: Terminology Section Downloads Download & Print TTT I Sec 02 Slides TTT I Sec 02 Handouts Version 2.1 Section 02: Terminology 1 2 Terminology Outline Industry Standards/Publications Truss Terms Bracing Terms Design

More information

Description. Lesson Outcomes. Assumptions. Build a Floor. Carpenter

Description. Lesson Outcomes. Assumptions. Build a Floor. Carpenter Carpenter Description Floors are an integral part of residential construction and must be built to specifications that meet building code requirements. In this Activity Plan, students will be cutting and

More information

ROOF-CEILING CONSTRUCTION

ROOF-CEILING CONSTRUCTION CHAPTER 8 ROOF-CEILING CONSTRUCTION SECTION R801 GENERAL R801.1 Application. The provisions of this chapter shall control the design and construction of the roof-ceiling system for all buildings. R801.2

More information

Dave's Glossary of Construction Terms. by Dave Osborne (www.daveosborne.com)

Dave's Glossary of Construction Terms. by Dave Osborne (www.daveosborne.com) Dave's Glossary of Construction Terms by Dave Osborne (www.daveosborne.com) 5/4" A thickness of decking material between 1 x 6 and 2 x 6. Although it is called 5/4 x 6, it is actually 1" thick and 5 1/2"

More information

E-Z BUILD SHED BUILDING GUIDE 10' 10' 10' 12' 10' 14' 10' 16' 10' 20'

E-Z BUILD SHED BUILDING GUIDE 10' 10' 10' 12' 10' 14' 10' 16' 10' 20' E-Z BUILD SHED BUILDING GUIDE 12' 14' 16' 20' North American softwood dimensional lumber sizes: NOMINAL in in 1 4 1 6 2 4 2 6 ACTUAL in in ¾ 3½ ¾ 5½ 1½ 3½ 1½ 5½ Shown with rollup door Construct your own

More information

With Illustrations, Blueprints & Step By Step Details Brought To You By ShedPlansz.Com Click Here To Get More Shed Plans

With Illustrations, Blueprints & Step By Step Details Brought To You By ShedPlansz.Com Click Here To Get More Shed Plans 12 X 8 Shed Plans With Illustrations, Blueprints & Step By Step Details Brought To You By ShedPlansz.Com Click Here To Get More Shed Plans Blueprints And Diagrams Instructions For Building The Shed

More information

10x10 Shed Plans and Building Guide

10x10 Shed Plans and Building Guide Page 1 Legal 2018 Zac Spade & Christopher D. Brown. All Rights Reserved For information about special discounts available for bulk purchases, sales promotions, fundraising and educational needs, contact

More information

How-To-build guide Garden shed

How-To-build guide Garden shed How-To-build guide Garden shed What you can build using this guide This guide will show you how to build a re-locatable garden shed. Before you begin building Contact your local territorial authority to

More information

E-Blueprints. Children s Backyard Playhouse 8 x sq. feet main 32 sq feet porch 2 x 4 Framed Walls 6' Ceiling Height

E-Blueprints. Children s Backyard Playhouse 8 x sq. feet main 32 sq feet porch 2 x 4 Framed Walls 6' Ceiling Height SDS-CAD - Specialized Design Systems E-BLUEPRINTS C ABINS G ARAGES Children s Backyard Playhouse 8 x 10 80 sq. feet main 32 sq feet porch 2 x 4 Framed Walls 6' Ceiling Height Plan sets contain the following:

More information

Best Barns USA Assembly Book

Best Barns USA Assembly Book Best Barns USA Assembly Book Revised November 20, 2013 the Easton - R 12'x 16' Manufactured by Reynolds Building Systems, Inc. 205 Arlington Drive Greenville, PA 16125 724-646-3775 This manual is copyrighted.

More information

ROOF-CEILING CONSTRUCTION

ROOF-CEILING CONSTRUCTION CHAPTER 8 ROOF-CEILING CONSTRUCTION SECTION R801 GENERAL R801.1 Application. The provisions of this chapter shall control the design and construction of the roof-ceiling system for all buildings. R801.2

More information

Chapter 7 - Porch Framing

Chapter 7 - Porch Framing Chapter 7 - Porch Framing Contents Chapter 7 - Porch Framing... 7-1 Timing & Prerequisites... 7-2 Concrete Porches Caps (Contractor)... 7-3 Organize the Porch Framing Lumber... 7-3 Types of Porch Roofs...

More information

Carpentry/Carpenter CIP Task Grid

Carpentry/Carpenter CIP Task Grid 1 Secondary Task List 100 SAFETY/OCCUPATIONAL ORIENTATION 101 Identify and follow all basic safety practices and procedures. 102 Identify and follow all lab safety practices and procedures. 103 Identify

More information

With Illustrations, Drawings & Step By Step Details. Click Here To Download 12,000 Shed Plans. 1 P a g e Download 12,000 More Shed Plans

With Illustrations, Drawings & Step By Step Details. Click Here To Download 12,000 Shed Plans. 1 P a g e Download 12,000 More Shed Plans With Illustrations, Drawings & Step By Step Details Click Here To Download 12,000 Shed Plans 1 P a g e Download 12,000 More Shed Plans Table of Contents OVERVIEW... 3 MATERIALS & CUTTING LISTS... 4 DRAWINGS,

More information

WALL TO FABRICATED FLOOR

WALL TO FABRICATED FLOOR WALL TO FABRICATED FLOOR PERIMETER WALL IS HELD IN PLACE BY WOODEN STRIP SCREED OPTIONAL NSF COVED FLOOR IS SHOWN PARTITION WALL IS HELD IN PLACE BY WOODEN STRIP SCREED OPTIONAL NSF COVED FLOOR IS SHOWN

More information

E-Z BUILD SHED GUIDE 12' 12' 12' 16' 12' 20'

E-Z BUILD SHED GUIDE 12' 12' 12' 16' 12' 20' E-Z BUILD SHED GUIDE 12' 12' 12' 16' 12' 20' BUILD You can construct your own E-Z frame shed with the help of this step by step guide. North American softwood dimensional lumber sizes: Nominal Actual in

More information

FOR PROFESSIONAL GARAGE DOOR INSTALLERS

FOR PROFESSIONAL GARAGE DOOR INSTALLERS Composite Garage Doors Installation Instructions FOR PROFESSIONAL GARAGE DOOR INSTALLERS Tools required Screwdriver Claw Hammer Locking Pliers Power Drill Level with a 3/32" Drill Bit Utility Knife 9/16",

More information

SAMPLE INSTRUCTIONS. Best Barns USA Assembly Book. the Belmont with pocket doors. Building Size 12'x16' or 12'x20' Revised January 10, 2012

SAMPLE INSTRUCTIONS. Best Barns USA Assembly Book. the Belmont with pocket doors. Building Size 12'x16' or 12'x20' Revised January 10, 2012 Best Barns USA Assembly Book Revised January 10, 2012 SAMPLE INSTRUCTIONS the Belmont with pocket doors Building Size 12'x16' or 12'x20' Manufactured by Reynolds Building Systems, Inc. 205 Arlington Drive

More information

8 x 10 Timber-frame Garden Shed

8 x 10 Timber-frame Garden Shed 8 x 10 Timber-frame Garden Shed Includes: Step-By-Step Instructions, Complete Details & Materials Lists Timber-framing is a traditional building method that uses a simple framework of heavy timber posts

More information

A. Rough carpentry includes but is not limited to the following:

A. Rough carpentry includes but is not limited to the following: SECTION 06100 ROUGH CARPENTRY PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division-1 Specification Sections,

More information