ISSUE Erection Manual

Transcription

1 Erection Manual The details and information in this book are for guidance of the erection of panels and flooring only. They are not site specific. Refer to the relevant panel drawings for the site, which should be read in conjunction with the approved Building Regulation drawings and must be adhered to and take priority over standard details. For sundry items refer to Sips Eco Panels manual.

2 Sips Eco Panels ERECTION MANUAL. CONTENTS GENERAL INFORMATION EM1 FIXINGS SHEET1 EM2 FIXINGS SHEET FOUNDATIONS AND GROUND FLOOR DETAILS EM110 GROUND FLOOR SOLEPLATE EM111 SOLEPLATE FIXING EM112 INTERNAL RESTRAINT STRAP FIXING 2.00 EXTERNAL WALL DETAILS EM210 STOCK EXTERNAL PANEL EM211 SIPS TO SIPS FIXING EM212 SIPS TO SIPS ROOF FIXING EM213 WINDOW COMPONENT AND ASSEMBLY EM214 SINGLE DOOR COMPONENTS AND ASSEMBLY EM215 EXTERNAL CORNER WALL DETAILS 5.00 ROOF DETAILS EM510 ROOF PANEL FIXING EM511 EAVES DETAILS EM512 RIDGE DETAILS EM513 TRUSS FIXING DETAILS EM514 ROOF DETAILS 1 EM515 ROOF DETAILS 2 EM516 ROOF DETAILS INTERMEDIATE FLOOR DETAILS EM310 EM311 EM312 EM313 EM314 EM315 EM316 EM317 EM318 EM319 EM320 EM321 I JOIST DETAIL 1 EM322 I JOIST DETAIL 2 EM323 I JOIST DETAIL 3 EM324 I JOIST DETAIL 4 EM325 I JOIST DETAIL 5 EM326 I JOIST DETAIL 6 DECK INSTALLATION FIRST FLOOR SOLEPLATE RIMBEAM PERPENDICULAR TO JOISTS RIMBEAM PARALLEL TO JOISTS CANTILEVER JOISTS JOIST NAILING DETAIL JOISTS PARALLEL TO NON LOADBEARING WALL LOADBEARING WALL TO FLOOR DETAIL NON LOADBEARING WALL PERPENDICULAR TO JOISTS HIGH LOAD JOIST TO JOIST CONNECTION JOIST TO JOIST CONNECTION EM327 I JOIST DETAIL 7 EM320 PARTY WALL AT FLOOR JUNCTION 4.00 INTERNAL DETAILS EM410 STOCK INTERNAL PANELS SHEET 1 EM411 STOCK INTERNAL PANELS SHEET 2 EM412 INTERNAL PANEL TO PANEL EM413 INTERNAL WALL JUNCTION EM414 PARTY WALL TO EXTERNAL WALL THIS MANUAL IS FOR GUIDANCE ONLY. IT IS NOT SITE SPECIFIC. YOU MUST REFER TO THE DRAWINGS PROVIDED WITH EACH KIT FOR DETAILS RELEVANT TO THE SITE YOU ARE WORKING ON. SHOULD A DETAIL DIFFER TO SITE DRAWINGS - SITE DRAWINGS WOULD USUALLY TAKE PREFERENCE. IF YOU HAVE ANY QUESTIONS PLEASE CONTACT OUR CONTRACTS MANAGER IN THE FIRST INSTANCE ON OR THE PROJECT MANAGER. CONTENTS

3 SCREW mm x 65mm grey phosphate at 300mm c/c for fixing flooring to joists all around the perimeter. SCREW mm x 35mm grey phosphate at 150mm c/c and 50mm in from end. TWISTNAIL 35 35mm x 4mm Square twist nails are used to fix joist hangers or truss clips. All holes to be filled. 90 NAILS 90mm x 3.1mm collated smooth galvanised nails used to fix internal studs to internal studs and 45mm bottom plates to 45mm soleplates at 600mm c/c. 63 NAILS 63mm x 3.1mm ring shank galvanised nails used to fix 45mm bottom plates to 20mm soleplate at 600mm c/c and studs to studs. 51 NAILS 51mm x 2.8mm ring shank galvanised nails used to fix top plates to top rails at 600mm c/c and studs to studs. ALSO INCLUDED IN THE PACKAGE ARE 2 ROLLS OF POLYTHENE. THESE MUST BE USED TO PROTECT MATERIAL AT ALL TIMES. EM1 FIXINGS SHEET 1

4 SST Code Size(mm) Box Qty Use ESCR8.0X x 80mm 50 For wedges and 2ply timber splines ESCR8.0X x 100mm 50 For wedges ESCR8.0X x 120mm 50 For wedges ESCR8.0X x 140mm 50 For wedges ESCR8.0X x 180mm 50 For 119mm SIPs ESCR8.0X x 200mm 50 For 144mm SIPs ESCR8.0X x 220mm 50 For 169mm SIPs ESCR8.0X x 260mm 50 For 194mm SIPs ALSO INCLUDED IN THE PACKAGE ARE 2 ROLLS OF POLYTHENE. THESE MUST BE USED TO PROTECT MATERIAL AT ALL TIMES. EM2 FIXINGS SHEET 2

5 600mm wide DPC 20mm or 45mm x 120mm width subject to width of sips panel over 300mm wide DPC 20mm or 45mm x 95mm SOLEPLATES FOR EXTERNAL WALL 90 NAILS 90mm x 3.1mm collated smooth galvanised nails used to fix internal studs to internal studs and 45mm bottom plates to 45mm soleplates at 600mm c/c. SCREW mm x 35mm grey phosphate at 150mm c/c and 50mm in from end. SOLEPLATES FOR INTERNAL WALL. LAYER FIXED TO HIGH STRENGTH BLOCKS WITH M10 x 100 NYLON FRAME FIXINGS OR THREADED MASONRY 440mm c/c. THIS DRAWING IS NOT SITE SPECIFIC. REFER TO RELEVANT DRAWINGS RELATIVE TO THE PROJECT YOU ARE WORKING ON. READ IN CONJUNCTION WITH DRAWING 4 M10 M10 Nylon frame fixings x 100mm at 440mm c/c for fixing soleplate to concrete slab. M8 M8 Nylon frame fixings x 60mm at 440mm c/c for fixing soleplate to concrete slab. EM110 GROUND FLOOR SOLEPLATE DETAILS

6 M10 M10 Nylon frame fixings x 100mm at 440mm c/c for fixing 45mm soleplate to concrete slab. M8 M8 Nylon frame fixings x 60mm at 440mm c/c for fixing 20mm soleplate to concrete slab. EXTERNAL WALL UPSTAND 7N/mm2 Dense Concrete Blocks, Density 1950kg/m3 x width of panel over, on 15mm Mortar bedding forming upstand. Concrete upstand can also be used with a GEN1 mix. D.P.C. THIS DRAWING IS NOT SITE SPECIFIC. REFER TO RELEVANT DRAWINGS PERTAINING TO THE PROJECT YOU ARE WORKING ON. TREATED SOLEPLATE F.F.L. INTERNAL UPSTAND 7N/mm2 Dense Concrete Blocks, Density 1950kg/m3 x width of panel over, on 15mm Mortar bedding forming upstand. Concrete upstand can also be used with a GEN1 mix.' INTERNAL PARTITION D.P.C. F.F.L. GROUND LEVEL MIN.150 SCREED/FLOORING INSULATION DPM CONCRETE SLAB CONCRETE SLAB SCREED/FLOORING INSULATION DPM D.P.C. D.P.C. HOLDING DOWN STRAPS Austenitic stainless steel holding down straps attached to SIP panels by 6 no. 3.35mm x 50mm stainless steel annular ring shank nails at corners, sides of openings and at 1200mm max. c/c and set into lean mix concrete where possible. Where practical, straps to be fixed to studs. Similar approved by supplier may be used. PAS 90 90mm Paslode nails used to fix internal studs to internal studs and 45mm baserail to soleplates at 600mm c/c. FIXING OF SOLEPLATES 20mm x SIP wall thickness or 95mm fixed with nylon frame fixings M8 x 60mm at 440mm centres 45mm x 95mm base rail from panel is then located centrally on soleplates and nailed with 65mm galvanised nails at 600mm centres. Rebated panel is seated over 45mm insert timber and screwed through OSB from both faces horizontally into 45mm insert timber with 3.5mm x 35mm screws at 150mm centres SCREW mm x 35mm grey phosphate at 150mm c/c and 50mm in from end. EM111 SOLEPLATE FIXINGS

7 EXTERNAL SKIN SHOWN INDICATIVE. DETAILED AND SUPPLIED BY OTHERS. DPC GROUND LEVEL MIN mm x 75mm x 10mm SQUARE WASHER - WASHER MUST BE TIGHT AGAINST VERTICAL FACE OF STRAP 7N DENSE BLOCK DPM LAPPED UNDER DPC SIP WALL PANEL ON 20mm SOLE PLATE. U/S OF SOLEPLATE MUST BE LEVEL WITH F.F.L. FFL FLOOR BUILD UP BY OTHERS FISCHER FBS 6 CONCRETE SCREW OR EQUAL AND APPROVED TO GIVE SAFE WORKING UPLIFT FORCE 3KN EM112 INTERNAL RESTRAINT STRAP

8 SCREW mm x 35mm grey phosphate at 150mm c/c and 50mm in from end. XW1912 SCREW HeadLok screws used for fixing SIP wall panels to SIP wall panels at 400mm c/c and 100mm in from end. ROOF PANELS ARE JOINED IN A SIMILAR FASHION. SPLINE IS LIKELY TO BE SOLID TIMBER. REFER TO SITE SPECIFIC DRAWINGS XW1930 Splines are a smaller form of SIP panels. They are nominally 99mm wide x (subject to wall thickness) and positioned as shown to join SIP panels to each other. XW1960 EM210 STOCK EXTERNAL PANELS

9 SPLINES AND RAILS FITTED INTO 45mm DEEP REBATES AROUND EDGE OF PANELS AND SCREWED AT 150mm c/c. TOP PLATE SHOULD LAPS BE NECESSARY UPPER LAYERS SHOULD BE LAPPED HORIZONTALLY OVER LOWER LAYERS BY AT LEAST 100mm AND STAGGERED. THE SHEETS SHOULD BE LAPPED AT LEAST 150mm VERTICALLY. SCREW mm x 35mm grey phosphate at 150mm c/c and 50mm in from end. BOTTOM PLATE SIP PANEL SIP PANEL SIP PANEL SPLINE SIP PANEL FIXING PROCEDURE GLIDEVALE PROTECT TF200 THERMAL REFLECTIVE BREATHER MEMBRANE IS FITTED TO ALL WALLS AND RUBEROID - PRO BREATHER MEMBRANE TO ROOFS ON COMPLETION OF THE FRAME ERECTION. IT SHOULD BE FITTED STRICTLY IN ACCORDANCE WITH MANUFACTURER'S INSTRUCTIONS. BELOW IS A BRIEF INSTALLATION GUIDE. THE GLIDEVALE MEMBRANE SHOULD BE FITTED WITH THE SILVER SIDE FACING OUT AND IN SUCH A WAY AS TO SHED WATER AWAY FROM THE SHEATHING AND BELOW THE LOWEST TIMBER. UPPER LAYERS SHOULD BE LAPPED HORIZONTALLY OVER LOWER LAYERS BY AT LEAST 100mm AND STAGGERED. THE SHEETS SHOULD BE LAPPED AT LEAST 150mm VERTICALLY. NAILS SHOULD BE GALVANISED, SHERADIZED OR AUSTENITIC STAINLESS STEEL, PHOSPHOR BRONZE OR SILICON BRONZE AND STAPLES SHOULD BE OF AUSTENITIC STAINLESS STEEL. TO PREVENT DAMAGE BY WIND, FIXINGS SHOULD BE AT REGULAR INTERVALS OF NOT MORE THAN 500mm c/c. IT IS ESSENTIAL THAT THE LOWEST TIMBERS IN THE WALL ARE PROTECTED BY THE BREATHABLE MEMBRANE. IF GAPS ARE EVIDENT IN ROOF PANELS THESE SHOULD BE FILLED WITH INTUMESCENT FOAM PROVIDED. EM211 SIP TO SIP PANEL FIXING

10 45 45mm x EPS WIDTH x 2 TIMBER SPLINES JOINING 2 PANELS TOGETHER. FIXED AS SHOWN BELOW. TIMBER SPLINES PROJECT BEYOND PANEL AND CUT PLUMB ON SITE BY OTHERS TO FORM EAVES OVERHANG x 80mm WASHERHEAD SCREW SIMPSON STRONG TIE CODE ESCR8.0x80 OR 6.0mm x 95mm 600mm c/c (BOTH SIDES - STAGGERED). 35mm x 3.5mm grey phosphate at 150mm c/c and 50mm in from end. 50 C L THIS DETAIL IS USED IF 90mm SPLINES ARE NOT PROVIDED mm x 90mm SMOOTH GALVANISED NAILS AT 300mm c/c (ONE SIDE). EM212 SIP TO SIP ROOF PANEL FIXING

11 TOP RAIL SIP PANELS LINTEL ELEVATION BOTTOM RAIL PLAN ON LINTEL SCREW mm x 35mm grey phosphate at 150mm c/c and 50mm in from end. ELEVATION EM213 TYPICAL WINDOW COMPONENTS AND ASSEMBLY NOTE: COMPONENTS WILL BE DELIVERED TO SITE + TIED TOGETHER, FOR ASSEMBLY ON SITE.

12 TOP RAIL SIP PANELS LINTEL SCREW 35 35MM X 3.5MM WOODSCREWS FOR FIXING PANELS TO SPLINES AND TOP AND BOTTOM PLATES AT 150MM C/C AND 50MM IN FROM END ELEVATION BOTTOM RAIL PLAN THE INNER TIMBER ON BOTH SIDES IS TO BE LEFT ON SITE AND NOT FIXED. THIS IS FOR CLIENT'S USE IF TIMBER DOOR FRAMES ARE USED. THEY ARE OMITTED IF upvc DOOR FRAME IS USED. THEY ARE NOT SUPPLIED FOR OTHER DOORS. SCREW mm x 35mm grey phosphate at 150mm c/c and 50mm in from end. ELEVATION EM214 TYPICAL EXTERNAL SINGLE DOOR COMPONENTS AND ARRANGEMENT NOTE: COMPONENTS WILL BE DELIVERED TO SITE + TIED TOGETHER, FOR ASSEMBLY ON SITE.

13 BRICKWORK SCREW HeadLok screws used for fixing SIP wall panels to SIP wall panels at 400MM c/c and 100mm in from end. OR Simpson Strong Tie washer head screw Code: ESCR8.0x160 SIP PANEL EXTERNAL CORNER BRICKWORK SIP PANEL INTERNAL PARTITION T JUNCTION - SIP / INTERNAL PARTITION EM215 EXTERNAL WALL DETAILS

14 Class D4 adhesive glue is supplied to fix the flooring to the joists and the same glue to apply to the joints so that it foams up and deems it watertight for a limited period. Glue is supplied to fix boards to joists PAS 51 51mm Paslode nails used to fix top plates to top rails at 600mm c/c. SCREW mm x 65mm grey phosphate at 300mm c/c for fixing flooring to joists all around the perimeter. IF FLOOR JOISTS HAVE KNOCKOUT HOLES FOR SERVICES. ENSURE JOISTS ARE ALL POSITIONED SO THAT HOLES LINE THROUGH. The tongued-and-groove flooring panels should be laid on top of the joists with the longest edges at right angles. Short end joints should be staggered by approximately half a board in a brick bond pattern with these ends falling on the centre line of the joist. If they overhang, additional timber supports or noggings should be provided. Although long edges need no intermediate support between joists, support noggings should be fixed at floor perimeters where unsupported edges abut a wall. Laying should start with a single row of panels parallel to the longest wall allowing for a suitably-sized expansion gap (minimum 12 mm) between the wall and edge of the panel. The second row should start with a half panel ensuring the brick bond pattern. A liberal application of Adhesive should be made to the groove and shoulder of the tongue of the profile joint to the edges of each panel to ensure that the entire joint is bonded, once the panels are butted tightly together. Any extruded residues should be left until dry and removed by brushing/scraping. Panels should be fixed to the joists and noggings using screws shown above or 10 gauge annular ring-shank nails of length 2.5 times the thickness of the panel. Nails should be spaced 25mm from each long edge with two more equidistant, between. Nails and screws should be hammered flush with the surface of the panel. Where nailing could damage ceilings or joists, panels should be fixed using countersunk screws in pre-drilled holes. Sealing All perimeter and exposed edges of the boards should be sealed by coating by brush with the Adhesive. Nail and screw heads may be protected by applying a thin covering of the Adhesive. A liberal bead of Adhesive (minimum 5mm diameter) should be made to the top of the joists. The boards should be positioned and mechanically-fixed to alternate joists. The tongue-and-groove joints should be bonded using Adhesive. EM310 DECK INSTALLATION

15 PAS 300mm c/c INTO RIM BEAM FIRST FLOOR SIP PANELS SIT ONTO FLOORING 1ST FLOOR JOIST 35 SCREWS AT 150mm c/c SCREW mm x 65mm grey phosphate at 300mm c/c for fixing flooring to joists all around the perimeter. SCREW mm x 35mm grey phosphate at 150mm c/c and 50mm in from end. PAS 90 90mm Paslode nails used to fix SIP panel base rail to floor deck at 600mm c/c. 1ST FLOOR LOAD BEARING INT PANELS SIT ONTO 20mm x 95mm PLATE ON FLOORING PAS 51 51mm Paslode nails used to fix internal soleplates to floor deck at 600mm c/c. 1ST FLOOR NON LOAD BEARING INT PANELS SIT ONTO 20mm x 95mm PLATE ON FLOORING 90mm nails at 600mm centres 51mm nails at 600mm centres Double joist FLOOR ZONE 95mm x 38mm min noggin at 600mm centres Headbinders nailed to panels at 300mm centres Double joist or nogging nailed to headbinder at 600mm centres EM311 FIRST FLOOR SOLEPLATE DETAIL

16 PAS 90 90mm Paslode nails used to fix rimboards to joists and joists to plate SCREW mm x 65mm grey phosphate at 300mm c/c for fixing flooring to joists all around the perimeter. Load bearing wall. Kerto or joist can be used as blocking. Fix Kerto rimboard to each joist, using one nail per flange. If double rimboard is used fix one to the joists and then fix second rim beam to former rim. beam. 38mm x 50mm Batten to give additional bearing to decking if required. Minimum bearing of 45mm. EM312 RIMBEAM PERPENDICULAR TO JOISTS

17 PAS 90 90mm Paslode nails used to fix rimboards to joists and joists to plate SCREW mm x 65mm grey phosphate at 300mm c/c for fixing flooring to joists all around the perimeter. A 50mm x 50mm plasterboard batten Ensure header joist rimboard is tied to floor zone by decking. Where decking expansion gap is required alternative support is required C B Refer to relevant details for party walls EM313 RIMBEAM PARALLEL TO JOISTS

18 PAS 90 90mm Paslode nails used to fix rimboards to joists and joists to plate. SCREW mm x 65mm grey phosphate at 300mm c/c for fixing flooring to joists all around the perimeter. Kerto blocking. Kerto Q closure panel attached to ends of joists. EM314 CANTILEVERED JOISTS

19 PAS 90 90mm Paslode nails used to fix rimboards to joists and joists to plate. SCREW mm x 65mm grey phosphate at 300mm c/c for fixing flooring to joists all around the perimeter. Weyroc flooring - flooring system adhesive glue is supplied to fix the flooring to the joists and the same glue to apply to the joints so that it foams up and deems it watertight for a limited period. Caberboard flooring- PU glue is supplied to fix boards to joists & the tape supplied must be applied across the joints after glueing the joints with PVA glue. 22mm CHIPBOARD 45mm RIMBOARD HEADBINDER JOIST 90MM PASLODE NAILS JOIST TWICE NAILED TO HEADBINDER RIMBOARD TWICE NAILED TO JOIST END RIMBOARD SKEW NAILED TO HEADBINDER AT 300mm c/c Nail each side of joist. Ensure at least 40mm from end to avoid splitting. EM315 JOIST NAILING DETAIL

20 PAS 90 90mm Paslode nails used to fix internal studs to internal studs and soleplates to soleplates at 600mm c/c. PAS 51 51mm Paslode nails used to fix top plates to top rails at 600mm c/c and studs to studs BOTTOM RAIL LOCATOR PLATE IF SPECIFIED FLOOR DECKING JOIST NOGGING OR BLOCKING ACCORDING TO CALCULATED DEFLECTION NOGGING HEAD BINDER TOP RAIL EM316 JOIST PARALLEL TO NON LOADBEARING WALL

21 PAS 90 90mm Paslode nails used to fix internal studs to internal studs and soleplates to soleplates at 600mm c/c. PAS 51 51mm Paslode nails used to fix top plates to top rails at 600mm c/c and studs to studs BOTTOM RAIL LOCATOR PLATE IF SPECIFIED FLOOR DECKING SPAN I-BEAM HEAD BINDER TOP RAIL FLOOR JOISTS MAY HAVE KNOCKOUT HOLES FOR SERVICES. ENSURE JOISTS ARE ALL POSITIONED SO THAT HOLES LINE THROUGH. EM317 LOADBEARING WALL TO FLOOR DETAIL

22 PAS 90 90mm Paslode nails used to fix rimboards to joists and joists to plate. SCREW mm x 65mm grey phosphate at 300mm c/c for fixing flooring to joists all around the perimeter. G1 Finnjoist detail reference Floor Decking Non Loadbearing wall. FLOOR JOISTS HAVE KNOCKOUT HOLES FOR SERVICES. ENSURE JOISTS ARE ALL POSITIONED SO THAT HOLES LINE THROUGH. EM318 NON LOADBEARING WALL PERPENDICULAR TO JOISTS

23 PAS 90 90mm Paslode nails used to fix rimboards to joists and joists to plate. SCREW mm x 65mm grey phosphate at 300mm c/c for fixing flooring to joists all around the perimeter. G3 Finnjoist detail reference Web stiffener if required by hanger Kerto or I-Joist Trimmer Kerto Face mount or Top mounted hanger Face mount or Top mounted hanger FLOOR JOISTS HAVE KNOCKOUT HOLES FOR SERVICES. ENSURE JOISTS ARE ALL POSITIONED SO THAT HOLES LINE THROUGH. EM319 HIGH LOAD JOIST TO JOIST CONNECTION

24 PAS 90 90mm Paslode nails used to fix rimboards to joists and joists to plate. SCREW mm x 65mm grey phosphate at 300mm c/c for fixing flooring to joists all around the perimeter. G6 Finnjoist detail reference Install Backer Blocks tight to top flange on both sides of Finnjoist. Attach with 10 no. clenched where possible. Backer Block to be a minimum of 250mm wide. Face mount or Top mounted hanger FLOOR JOISTS HAVE KNOCKOUT HOLES FOR SERVICES. ENSURE JOISTS ARE ALL POSITIONED SO THAT HOLES LINE THROUGH. EM320 I JOIST TO I JOIST CONNECTION

25 PAS 90 90mm Paslode nails used to fix rimboards to joists and joists to plate. SCREW mm x 65mm grey phosphate at 300mm c/c for fixing flooring to joists all around the perimeter. TF1b Finnjoist detail reference Load bearing wall. Kerto or Finnjoist can be used as blocking. Fix Kerto rimboard to each Finnjoist, using one nail per flange. If double rimboard is used fix one to the joists and then fix second rim beam to former rim beam. 38mm x 50mm Batten to give additional bearing to decking if required. Minimum bearing of 45mm. FLOOR JOISTS HAVE KNOCKOUT HOLES FOR SERVICES. ENSURE JOISTS ARE ALL POSITIONED SO THAT HOLES LINE THROUGH. EM321 I JOIST DETAIL 1

26 PAS 90 90mm Paslode nails used to fix rimboards to joists and joists to plate. SCREW mm x 65mm grey phosphate at 300mm c/c for fixing flooring to joists all around the perimeter. TF2a Finnjoist detail reference A Infill with mineral wool insulation before fitting joists. 50mm x 50mm plasterboard batten Ensure header joist rimboard is tied to floor zone by decking. Where decking expansion gap is required alternative support is required. C B Refer to relevant details for party walls. FLOOR JOISTS HAVE KNOCKOUT HOLES FOR SERVICES. ENSURE JOISTS ARE ALL POSITIONED SO THAT HOLES LINE THROUGH. EM322 I JOIST DETAIL 2

27 PAS 90 90mm Paslode nails used to fix rimboards to joists and joists to plate. SCREW mm x 65mm grey phosphate at 300mm c/c for fixing flooring to joists all around the perimeter. TF3 Finnjoist detail reference Finnjoist or Kerto blocking. Web stiffener or side reinforcement may be required on each side of Finnjoist. Kerto Q closure panel attached to ends of joists. FLOOR JOISTS HAVE KNOCKOUT HOLES FOR SERVICES. ENSURE JOISTS ARE ALL POSITIONED SO THAT HOLES LINE THROUGH. EM323 I JOIST DETAIL 3

28 PAS 90 90mm Paslode nails used to fix rimboards to joists and joists to plate. SCREW mm x 65mm grey phosphate at 300mm c/c for fixing flooring to joists all around the perimeter. Weyroc flooring - flooring system adhesive glue is supplied to fix the flooring to the joists and the same glue to apply to the joints so that it foams up and deems it watertight for a limited period. Caberboard flooring- PU glue is supplied to fix boards to joists & the tape supplied must be applied across the joints after glueing the joints with PVA glue. 22mm CHIPBOARD 45mm RIMBOARD HEADBINDER JOIST 90mm PASLODE NAILS JOIST TWICE NAILED TO HEADBINDER RIMBOARD TWICE NAILED TO JOIST END RIMBOARD SKEW NAILED TO HEADBINDER AT 300mm c/c. Nail each side of joist. Ensure at least 40mm from end to avoid splitting. FLOOR JOISTS HAVE KNOCKOUT HOLES FOR SERVICES. ENSURE JOISTS ARE ALL POSITIONED SO THAT HOLES LINE THROUGH. EM324 I JOIST DETAIL 4

29 PAS 90 90mm Paslode nails used to fix rimboards to joists and joists to plate. SCREW mm x 65mm grey phosphate at 300mm c/c for fixing flooring to joists all around the perimeter. G1 Finnjoist detail reference Floor Decking. Non Loadbearing wall. FLOOR JOISTS HAVE KNOCKOUT HOLES FOR SERVICES. ENSURE JOISTS ARE ALL POSITIONED SO THAT HOLES LINE THROUGH. EM325 I JOIST DETAIL 5

30 PAS 90 90mm Paslode nails used to fix rimboards to joists and joists to plate. SCREW mm x 65mm grey phosphate at 300mm c/c for fixing flooring to joists all around the perimeter. G3 Finnjoist detail reference Web stiffener if required by hanger Kerto or I-Joist Trimmer Kerto Face mount or Top mounted hanger Face mount or Top mounted hanger FLOOR JOISTS HAVE KNOCKOUT HOLES FOR SERVICES. ENSURE JOISTS ARE ALL POSITIONED SO THAT HOLES LINE THROUGH. EM326 I JOIST DETAIL 6

31 PAS 90 90mm Paslode nails used to fix rimboards to joists and joists to plate. SCREW x 65mm grey phosphate at 300c/c for fixing flooring to joists all around the perimeter. G4 Finnjoist detail reference Kerto or I-Joist Trimmer Face fix hanger fitted with web stiffeners and fully nailed to improve uplift capacity if required in heavy duty loading FLOOR JOISTS HAVE KNOCKOUT HOLES FOR SERVICES. ENSURE JOISTS ARE ALL POSITIONED SO THAT HOLES LINE THROUGH. EM327 I JOIST DETAIL 7

32 PAS 90 90mm Paslode nails used to fix internal studs to internal studs and soleplates to soleplates at 600mm c/c. PAS 51 51mm Paslode nails used to fix top plates to top rails at 600mm c/c. JOIST HANGER ENSURE FRAME IS SET OUT TO PROVIDE A MINIMUM 50mm CAVITY BETWEEN PLY FACES. THIS DETAIL SHOWS TIMBER FRAME ERECTION ONLY. REFER TO ROBUST DETAILS MANUAL FOR SOUND RESISTANCE DETAILS. EM328 PARTY WALL AT FLOOR JUNCTION

33 PAS 90 90mm Paslode nails used to fix rimboards to joists and joists to plate. SCREW mm x 65mm grey phosphate at 300mm c/c for fixing flooring to joists all around the perimeter. JOISTS FLOORING PERPENDICULAR DETAIL A EM329 METAL WEB JOISTS PERPENDICULAR 1

34 PAS 90 90mm Paslode nails used to fix rimboards to joists and joists to plate. SCREW mm x 65mm grey phosphate at 300mm c/c for fixing flooring to joists all around the perimeter. JOISTS FLOORING PERPENDICULAR DETAIL B EM330 METAL WEB JOISTS PERPENDICULAR 2

35 PAS 90 90mm Paslode nails used to fix rimboards to joists and joists to plate. SCREW mm x 65mm grey phosphate at 300mm c/c for fixing flooring to joists all around the perimeter. JOISTS FLOORING PERPENDICULAR DETAIL C EM331 METAL WEB JOISTS PERPENDICULAR 3

36 PAS 90 90mm Paslode nails used to fix rimboards to joists and joists to plate. SCREW mm x 65mm grey phosphate at 300mm c/c for fixing flooring to joists all around the perimeter. JOISTS FLOORING PARALLEL DETAIL A EM332 METAL WEB JOISTS PARALLEL TO RIM 1

37 PAS 90 90mm Paslode nails used to fix rimboards to joists and joists to plate. SCREW mm x 65mm grey phosphate at 300mm c/c for fixing flooring to joists all around the perimeter. JOISTS FLOORING PARALLEL DETAIL B EM333 METAL WEB JOISTS PARALLEL TO RIM 2

38 NOTE: WHEN REFERRING TO THE LAYOUT PLAN FOR INSTALLATION - INTERNAL PANELS HAVE BEEN VIEWED FROM BELOW AND RIGHT HAND SIDE. TF1912 PAS 90 90mm Paslode nails used to fix internal studs to internal studs and soleplates to soleplates at 600mm c/c. PAS 51 51mm Paslode nails used to fix top plates to top rails at 600mm c/c and studs to studs. TF1960 TF1930 EM410 STOCK INTERNAL PANELS SHEET 1

39 2 PLY 195 x 45mm 2 PLY 195 x 45mm TFD905 TFD830 2 PLY 195 x 45mm NOTE: WHEN REFERRING TO THE LAYOUT PLAN FOR INSTALLATION - INTERNAL PANELS HAVE BEEN VIEWED FROM BELOW AND RIGHT HAND SIDE. PAS 90 90mm Paslode nails used to fix internal studs to internal studs and soleplates to soleplates at 600mm c/c. TFD1235 PAS 51 51mm Paslode nails used to fix top plates to top rails at 600mm c/c and studs to studs. EM411 STOCK INTERNAL PANELS SHEET 2

40 PAS 51 51mm Paslode nails used to fix top plates to top rails at 600mm c/c and studs to studs PAS 90 90mm Paslode nails used to fix internal studs to internal studs and soleplates to soleplates at 600mm c/c. PAS 90 90mm Paslode nails used to fix internal studs to internal studs and soleplates to soleplates at 600mm c/c. FOR SITE SPECIFIC NAIL FIXING SCHEDULE REFER TO STRUCTURAL CALCULATIONS OR PANEL DRAWINGS. EM412 INTERNAL PANEL TO PANEL

41 PLASTERBOARD NOGGINGS STUD PAS 90 90mm Paslode nails used to fix internal studs to internal studs and soleplates to soleplates at 600mm c/c. WALL TO WALL JUNCTION PAS 51 51mm Paslode nails used to fix top plates to top rails at 600mm c/c and studs to studs. SCREW HeadLok screws used for fixing stud clusters together at 600mm c/c OR Simpson Strong Tie washer head screw Code: ESCR8.0x80 STUD STUD CLUSTER 4 WALL JUNCTION EM413 INTERNAL WALL JUNCTIONS

42 MIN. 50 BRICKWORK SIP PANEL PARTY WALL MIN. 50 CAVITY TO BE MAINTAINED. EM414 INTERNAL PARTY WALL TO EXTERNAL JUNCTION

43 ROOF PANEL FIXED DOWN WITH HEADLOK SCREW 250 AT 400mm c/c. PAS 51 51mm Paslode nails at 600mm c/c used to fix plasterboard wedges. PAS 90 90mm Paslode nails. SCREW mm x 6mm HeadLok screws used for fixing roof panels to wall panels. Fixed at 400mm c/c and 100mm in from end. OR Simpson Strong Tie washer head screw Code: ESCR8.0x260. EM510 ROOF PANEL FIXING

44 ROOF PANEL FIXED DOWN WITH HEADLOK SCREW 250 AT 400mm c/c. TIMBER WEDGE FIXED WITH HEADLOK SCREWS 100 AT 400mm c/c. 20mm HEADBINDER FIXED HEADLOK SCREWS 100 AT 400mm c/c. SIP WALL TYPICAL EAVES (NO CEILING) ROOF PANEL FIXED DOWN WITH HEADLOK SCREW 250 AT 400mm c/c. IF PARTITION IS FITTED WITH FRAME BY ERECTORS A 400mm STRIP OF VCL MUST BE FITTED BEFORE THE PARTITION IS CONNECTED. ROOF PANEL FIXED DOWN WITH HEADLOK SCREW 250 AT 400mm c/c. TIMBER WEDGE FIXED WITH HEADLOK SCREWS 100 AT 400mm c/c. TIMBER WEDGE FIXED WITH HEADLOK SCREWS 100 AT 400mm c/c. 20mm x 95mm HEADBINDER FIXED HEADLOK SCREWS 100 AT 400mm c/c. 45mm x 95mm PARTITION. PAS 51 51mm Paslode nails used to fix top plates to top rails at 600mm c/c. TYPICAL EAVES (ATTIC ROOM) PAS 90 90mm Paslode nails. SCREW mm x 6 HeadLok screws used for fixing roof panels to wall panels. Fixed at 400mm c/c and 100mm in from end. OR Simpson Strong Tie washer head screw Code: ESCR8.0x260 EM511 EAVES DETAILS

45 ROOF PANEL FIXED DOWN WITH HEADLOK SCREW 250 AT 400mm c/c. TIMBER WEDGE FIXED WITH HEADLOK SCREW 250 AT 400mm c/c ALTERNATELY AND IN PAIRS AT EACH BUTT JOINT. TIMBER WEDGE FIXED WITH HEADLOK SCREW 100 AT 400mm c/c 45mm x 120mm CEILING JOISTS ON MIDI HANGERS ONTO WEDGE. TIMBER WEDGE SECURED WITH HEADLOK SCREW 250 AT 400mm c/c RIDGE BEAM FIXED CENTRALLY WITH HEADLOK SCREWS 150 AT 600mm c/c FIXED FROM ALTERNATE SIDES. FIXING OF RIDGE BEAM & LOOSE CEILING ROOF PANEL FIXED DOWN WITH HEADLOK SCREW 250 AT 400mm c/c. ROOF PANEL FIXED DOWN WITH HEADLOK SCREW 100 AT 400mm c/c. RIDGE BEAM FIXED CENTRALLY WITH HEADLOK SCREWS 150 AT 600mm c/c FIXED FROM ALTERNATE SIDES RIDGE DETAIL- 45 DEG ROOF PITCH SCREW mm x 6 HeadLok screws used for fixing roof panels to wall panels. Fixed at 400mm c/c and 100mm in from end. OR Simpson Strong Tie washer head screw Code: ESCR8.0x260 SCREW 95 95mm HeadLok screws used for fixing roof timber 2 ply splines together at 600mm c/c. OR Simpson Strong Tie washer head screw Code: ESCR8.0x80 SCREW mm HeadLok screws used ALL HOLES FILLED WITH SQUARE TWIST NAILS for fixing SIP wall panels to SIP wall panels at 400mm c/c and 100mm in from end. OR Simpson Strong Tie washer head screw Code: ESCR8.0x160 TWISTNAIL 35 35mm x 4mm Square twist nails are used to fix joist hangers or truss clips. All holes to be filled. EM512 RIDGE DETAILS

46 TA1/HTA1 framing anchor 2 per connection. NAIL x 3.75 square twisted sheradised nails to every hole for fixing anchor or truss clip to truss Wallplate SIP wall panel Ensure cripple studs are positioned under multiple trusses at least the width of the girder or multiple truss where required TC Cullen truss clip. 2 per connection. FIXING MULTIPLE TRUSSES TO WALLPLATES SIP wall panel Single trusses are checked for bearing under point load formula 9.2 of the certificate. Therefore cripple studs may be required under single trusses. Refer to site specific panel drawings. FIXING SINGLE PLY TRUSSES TO WALLPLATES EM513 TRUSS FIXING DETAILS

47 HEADLOK SCREWS TO SUIT TWISTNAIL 35 35mm x 4mm Square twist nails are used to fix joist hangers or truss clips. All holes to be filled. SIP - ROOF TO SUIT VERGE DETAIL GABLE LADDER FIXED USING PAS90 NAILS TO TRUSS AND SPANDREL TOP 300mm c/c. GABLE LADDER 45mm x 95mm LADDER. SCREW mm x 6 HeadLok screws used for fixing roof panels to wall panels. Fixed at 400mm c/c and 100mm in from end. OR Simpson Strong Tie washer head screw Code: ESCR8.0x260 ROOF TRUSS 25mm x 100mm TRUSS STABILITY BRACES TWICE NAILED TO RUNNER & EACH TRUSS. PAS 90 90mm Paslode nails. 45mm x 95mm RUNNER SCREWED TO SIP KIT AT 300mm c/c. 45mm x 95mm NOGGINS AT 600mm c/c. NAILED TO TRUSS & TIMBER RUNNER. DETAIL AT SPANDREL PANELS PAS 51 51mm Paslode nails used to fix top plates to top rails at 600mm c/c. EM514 ROOF DETAILS 1 SPANDREL AND VERGE

48 ROOF PANEL FIXED DOWN WITH HEADLOK SCREW 250 AT 400mm c/c. ROOF PANEL FIXED DOWN WITH HEADLOK SCREW 250 AT 400mm c/c. TIMBER WEDGE FIXED WITH HEADLOK SCREWS 100 AT 400mm c/c. DOUBLE JOIST PLASTERBOARD SUPPORT WEDGE FIXED WITH PAS 51 NAILS AT 600mm c/c. TYPICAL EAVES (LOW EAVES FOR ATTIC STORAGE ROOM) 3 No. PAS90 NAILS FROM EACH SIDE. PAS 51 NAILS AT 600mm c/c TO FIX HEADBINDER. FIXING OF RIDGE BEAM TO INTERNAL PARTITIONS SCREW mm x 6 HeadLok screws used for fixing roof panels to wall panels. Fixed at 400mm c/c and 100mm in from end. OR Simpson Strong Tie washer head screw Code: ESCR8.0x260 PAS 51 51mm Paslode nails used to fix top plates to top rails at 600mm c/c. PAS 90 90mm Paslode nails EM515 ROOF DETAILS 2 RIDGE AND EAVES

49 ROOF PANELS FIXED DOWN TO WEDGES WITH HEADLOK SCREWS AT 400mm c/c. SIP ROOF PANEL TIMBER PACKER CEILING 400mm c/c EAVES FILLET PAS 90 90mm Paslode nails. PAS 51 51mm Paslode nails at 600mm c/c used to fix plasterboard wedges. TIMBER WEDGES FIXED USING HEADLOK SCREWS AT 400mm c/c. SCREW mm x 6 HeadLok screws used for fixing roof panels to wall panels. Fixed at 400mm c/c and 100mm in from end. OR Simpson Strong Tie washer head screw Code: ESCR8.0x260 SCREW 95 95mm HeadLok screws used for fixing roof timber 2 ply splines together at 600mm c/c. OR Simpson Strong Tie washer head screw Code: ESCR8.0x80 EM516 ROOF DETAILS 3 CEILING FIXING