ASME BPE 2014 DT Range of Bioprocessing Fittings
|
|
- Roxanne Phelps
- 6 years ago
- Views:
Transcription
1 SME PE 2014 DT Range of ioprocessing Fittings lchem Process Ltd offer the full range of SME PE ioprocessing Fittings in both SF1 and SF4 surface finishes. The standard provides a good manufacturing guide to the common installation problems and offers solutions and examples of what is considered to be acceptable and unacceptable for the design of modern io-pharmaceutical installations. The standard also covers process vessel design, pump and valve selection and installation. The DT fittings are designed for orbital and automatic welding procedures and include, clamp ferrules, bends, tees, reducers, instrument tees and end caps. The DT fittings are offered in accordance with the range listed in the current 2014 standard, although for continuity we have chosen to keep to the original DT references specified in the original PE standard, namely DT-7 to DT-30 as the industry is already familiar with these items. Standard DT fittings are offered to SF-1 surface finish at 0.51µM Ra Max for both tube and fittings, with SF-4 (0.38µM Ra Max) being available on special order. The welding tangents of all DT the fittings have a controlled sulphur content of between and 0.017%. This range is meant to balance with the sulphur content usually found in tube and should leads to a more even welding process. Material certification is offered to EN for all fittings and tube supplied to SME PE. Valves: range of Diaphragm Valve, Sample Valves, Radial Seat Tank ottom valves, utterfly Valves, Non-Return Valves, all Valves and Piston Valves are also available to match the surface finishes offered in the standard. Features & options: Surface finish - SF-1 (0.5µM Ra Max) & SF-4 (0.25µM Ra Max) Sizes - ¼ to 6 with specials sizes made to order Fittings - ends, Tees, Reducers and End Caps Sulphur - Controlled sulphur range between to 0.017% daptors - daptors available for special instrument pump applications Gaskets - FD & , USP Class V1, 3 and CE 1935/2004 Metric - Orbital weld fittings available to DIN32676 & DIN11865 DS SME PE Plain Weld End Page No: 1
2 Related Standards: DIN32676 Table, and C, Clamp Ferrules DIN11866 and DIN11865, Tube and Orbital Weld Fittings DIN11864 and DIN11853 FD and Clamp Gaskets 3 standard class 111 Clamp Gaskets USP Class V1 section 88 with section 87 available to order EN Material Certification Materials: 316L SS and low sulphur N-2 lloy400, C22 & C276 Duplex alloys UNS32750 & SF 2205 and Mo products and 904L, 254SMO and L6-N Titanium and plastics such as S, Polypropylene and Nylon luminium Compatibility: Where the environment is deemed aggressive to either the seal or the pipework system, please provide details of the product media and operating conditions the pressure and temperature conditions. Our technical staff will assist you with the selection of the most appropriate material for your particular application. Related Products: Clamp Ferrules, lanks and daptors Diaphragm Valves septic Sample Valves Radial Seat Tank ottom Valves Non-Return Valves utterfly Valves all Valves DS SME PE Plain Weld End Page No: 2
3 utomatic Weld end 90º - DT-7 (PE 2009) DT (PE 2014) R R Part No ¼ ⅜ ½ ¾ ½ ½ utomatic Weld end 45º - DT-8 (PE 2009) DT (PE 2014) R R Part No ¼ ⅜" ½ ¾ ½ ½ DS SME PE Plain Weld End Page No: 3
4 utomatic Weld Equal Tee - DT-9 (PE 2009) DT (PE 2014) Part No ¼ ⅜ ½ ¾ ½ ½ utomatic Weld Equal Cross - DT-9 (PE 2009) DT (PE 2014) Part No ¼ ⅜ ½ ¾ ½ ½ DS SME PE Plain Weld End Page No: 4
5 utomatic Weld Reducing Tee - DT-10 (PE 2009) DT (PE 2014) Part No ⅜ ¼ ½ ¼ ½ ⅜ ¾ ¼ ¾ ⅜ ¾ ½ ¼ ⅜ ½ ¾ ½ ½ ½ ¾ ½ ½ ¾ ½ ½ ½ ½ ¾ ½ ½ 1.½ ½ ½ ¾ ½ ½ ½ ¾ ½ ½ DS SME PE Plain Weld End Page No: 5
6 utomatic Weld Concentric Reducer - DT-11 (PE 2009) DT (PE 2014) L1 L2 Part No ⅜ ¼ ½ ¼ ½ ⅜ ¾ ¼ ¾ ⅜ ¾ ½ ¼ ⅜ ½ ¾ ½ ¼ ½ ⅜ ½ ½ ½ ¾ ½ ½ ¾ ½ ½ ½ ½ ¾ ½ ½ 1.½ ½ ½ ¾ ½ ½ ¾ ½ ½ DS SME PE Plain Weld End Page No: 6
7 utomatic Weld Eccentric Reducer - DT-11 (PE 2009) DT (PE 2014) L1 L2 Part No ⅜ ¼ ½ ¼ ½ ⅜ ¾ ¼ ¾ ⅜ ¾ ½ ¼ ⅜ ½ ¾ ½ ¼ ½ ⅜ ½ ½ ½ ¾ ½ ½ ¾ ½ ½ ½ ½ ¾ ½ ½ 1.½ ½ ½ ¾ ½ ½ ¾ ½ ½ DS SME PE Plain Weld End Page No: 7
8 utomatic Weld Return end DT-23 (PE 2009) DT (PE 2014) R R Part No ¼ N-0064 ½ N-013 ¾ N N ½ N N ½ N N N N-152 DS SME PE Plain Weld End Page No: 8
9 utomatic Weld 180 end ottom Outlet Weld - DT-23.1 (PE 09) DT (PE 2014) C D Part No C D ¾ ½ ½ ¾ ½ ½ ½ ¾ ½ ½ ¾ ½ ½ ½ ½ ¾ ½ ½ 1.½ ½ ½ ¾ ½ ½ ½ ¾ ½ ½ Please Note: Special DT-23 s are usually made to order and are a NON stock item Dimensions are guidelines and may be subject to change, please enquire to discuss your requirements before ordering. DS SME PE Plain Weld End Page No: 9
10 utomatic Weld 180 end Side Outlet Weld - DT-23.2 (PE 09) DT (PE 2014) C R C D Part No ¾ ½ ½ ¾ ½ ½ ½ ¾ ½ ½ ¾ ½ ½ ½ ½ ¾ ½ ½ 1.½ ½ ½ ¾ ½ ½ ½ ¾ ½ ½ Please Note: Special DT-23 s are usually made to order and are a NON stock item Dimensions are guidelines and may be subject to change, please enquire to discuss your requirements before ordering. DS SME PE Plain Weld End Page No: 10
11 utomatic Weld 180 end ottom Outlet Clamp - DT-23.3 (PE 09) DT (PE 2014) C D Part No C D ¾ ½ C ½ C ¾ C ½ ½ C ½ ¾ C ½ C ½ C ¾ C C ½ C ½ ½ C ½ ¾ C ½ C ½ 1.½ C ½ C ½ C ¾ C C ½ C C ½ C ½ C ¾ C C ½ C C ½ C C Please Note: Special DT-23 s are usually made to order and are NON stock item Dimensions are guidelines and may be subject to change, please enquire to discuss your requirements before ordering. DS SME PE Plain Weld End Page No: 11
12 utomatic Weld 180 end Side Outlet Clamp - DT-23.4 (PE 09) DT (PE 2014) C D Part No C ¾ ½ D ½ D ¾ D ½ ½ D ½ ¾ D ½ D ½ D ¾ D D ½ D ½ ½ D ½ ¾ D ½ D ½ 1.½ D ½ D ½ D ¾ D D ½ D D ½ D ½ D ¾ D D ½ D D ½ D D Please Note: Special DT-23 s are usually made to order and are a NON stock item Dimensions are guidelines and may be subject to change, please enquire to discuss your requirements before ordering. DS SME PE Plain Weld End Page No: 12
13 utomatic Weld End Cap - DT-30 (PE 2009) DT (PE 2014) C Part No ½ ¾ ½ ½ DS SME PE Plain Weld End Page No: 13
STEAM QUALITY TEST ELBOWS
STEAM QUALITY TEST ELBOWS V W Elbow Size V W 0.75-1.5 40mm 100mm 2 or larger 50mm 100mm Test Elbow Dimensions Nominal size Pipe outside diameter (inches/mm) Pipe wall thickness X Y A - Both ends B - All
More informationDigital inductive conductivity transmitter
Digital inductive conductivity transmitter Optimal solution for conductivity measurements in difficult fluids (polluted, dirty,...) PEEK/PPA version for CIP applications Large range of process connections
More informationSA seal Sanitary diaphragm seal type
SA seal Sanitary diaphragm seal type Design description Badotherm sanitary seals are designed for pressure, level and flow measurements in food & beverage and pharmaceutical industries where the formation
More informationQCF Unit and Assessment Specification
QCF Unit and Assessment Specification Unit title Ofqual Unit code Forming and Assembling Pipework Systems T/600/5855 SQA Unit code FT2X 60 SSC Ref Unit 82 History of changes Publication date: March 2012
More informationOPTIMASS 1000 Technical Datasheet
OPTIMASS 1000 Technical Datasheet Sensor for mass flow First choice for universal applications Best price-performance ratio A wide range of options available with no restrictions The documentation is only
More informationForming and Assembling Pipework Systems F/508/4663
Unit Title Ofqual unit reference number (code) Organisation Reference Forming and Assembling Pipework Systems F/508/4663 QU051481 Unit Level Level 2 Unit Sub Level None GLH 64 Unit Credit Value 14 Sector
More informationForming and assembling pipework systems
Unit 007 Forming and assembling pipework systems Level: 2 Credit value: 14 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to cover a
More informationPressure transmitter For sanitary applications Model SA-11
Electronic pressure measurement Pressure transmitter For sanitary applications Model SA-11 WIKA data sheet PE 81.80 for further approvals see page 8 Applications For gases, compressed air, vapour, liquids,
More informationPressure Vessel Assembly Instructions
Pressure Vessel Assembly Instructions 1) Measure aluminum tube outer diameter 2) Machine both end caps and only drill pilot holes for all hoes shown 3) Weld both end caps onto the aluminum tube and be
More informationStock Programme Scope of Supply. v
Scope of Supply v2.10 2018 Pipe: Seamless Stainless Steel ASTM A312 ASME B36.19 TP316/316L DN15 DN250 10S 160 Stainless Steel ASTM A312 ASME B36.19 TP304/304L DN15 DN200 10S 160 Low Temp ASTM A333 ASME
More informationTR2000 Piping and Valve Materials under PED. The usage of this standard based on ASME B31.3
Memo 2010-12-01 (rev. 2) To Copy From Trælnes, Hege Subject TR2000 Piping and Valve Materials under PED. The usage of this standard based on ASME B31.3 1 Introduction and objective Reference is made to
More informationNCR-80. BinMaster Price Book binmaster.com Subject to change without notice 1
NCR-80 inmaster Price ook 01-2019 binmaster.com Subject to change without notice 1 NCR-80 NCR-80 Non-contact radar continuously measures the level of powders, granules, solids, or liquids in a vessel.
More informationCombiTemp TCR6 Standard RTD temperature sensor
Main features Sensor and connection in stainless steel, ISI 6 DIN form B housing Robust design pplications Industrial applications with industrial process connection Pipe systems Heating systems Water
More informationDigital conductivity transmitter
Digital conductivity transmitter Compact version with integrated conductivity electrodes Remote version with seperated transmitter for short (15 ft.) or long (1500 ft.) distance Commissioning is easy due
More informationSight glass window Sight flow indicator
SIGHT GLASS Sight glass components allow operators to safely observe processes inside tanks, pipes, reactors and vessels. When it comes to selecting a sight glass, a wide variety of factors should be considered
More informationLEADING THE WAY IN WELLHEAD AND PIPELINE TECHNOLOGY. Wellheads Christmas Trees Gate Valves Surface Safety Valves Frac Trees Check Valves
LEADING THE WAY IN WELLHEAD AND PIPELINE TECHNOLOGY Wellheads Christmas Trees Gate Valves Surface Safety Valves Frac Trees Check Valves OUR Stream-Flo Industries Ltd. is committed to provide premium quality
More informationSIGMA Ingenieurgesellschaft mbh
Software & Engineering PROBAD PROBAD Overview PROBAD is a solution for the code-based strength calculations of pressure parts. It allows re-checking, designing or optimizing of vessel- and pipe components
More informationOperating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4
Operating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-320038 Ph.: 800-274-6848 Revision H 01/2016
More informationLengths [7] Ø.50 [13] [7] [13]
Dimensions in [ ] are in millimeters Standard (2 1 / 2 6 ) Standard (9 24 ).75 STEM.40 [10] EXTERNAL THREAD.61 [15] 1.00 [25] STEM STEM Ø.44 [11] Threaded-Stepped Shank Standard Stem Length Length (T)
More informationSIGHT GLASS. Sight glass components allow operators to safely observe processes inside tanks, pipes, reactors and vessels.
SIGHT GLASS Sight glass components allow operators to safely observe processes inside tanks, pipes, reactors and vessels. SIGHT GLASS Sight flow indicator. A sight flow indicator is used in process pipelines
More information20,00 20,00 3,00 TYP. R5,00 1,00 TYP. R3,00 TYP. 2X 4,00 THRU 1,00 TYP. 10,00 10,00 (5,00) 10,00 10,00 19,00 7,00 4,50 THRU R15,00 12,00
,00,00,00 0,0 70,00 0,00 R,00,00 TYP.,00 TYP. R,00 TYP.,00 TYP. X,00 THRU 0,00 0,00 0,00 0,00 0,00 0,00 0,00 (,00) 0,00 0,00 SETION - 9,00 0 0 7,00,0 THRU 0,0 R,00 R,00 R0,0 TYP. ETIL,00 ompetitor: Stainless
More informationHC Hydraulic Expansion Chucks
Technical Information HC Hydraulic Expansion Chucks design, function, effect, and application features, handling, and action application instructions precision tool length setting torques accessories sealed
More informationProducts catalogue (I-P Edition)
Products catalogue (I-P Edition) Products catalogue (I-P Edition) FROM QUALITY OUR NATURAL DEVELOPMENT Active in the industry of Refrigeration and Air Conditioning for fifty-five years, Castel is well-established
More informationPlanning and realising of penstocks
Penstocks Planning and realising of penstocks Being a local company with active international partners, we suppied many satisfied custumers with our products and services around the globe. Due to our employees
More informationLIMITED WARRANTY. Some products and sizes may be discontinued when stock is depleted, or may require a minimum quantity for ordering.
LIMITED WRRNTY radford, a division of Dixon Valve and oupling ompany, (herein called "radford") warrants the products described herein, and manufactured by radford to be free from defects in material and
More informationINSERTION paddle wheel flowmeter for continuous flow measurement
INSERTION paddle wheel flowmeter for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both
More informationWalk-Behind Sprayer TL-80 & TL-80SS. Parts List
November, 0 Lit. No., Rev. 00 Walk-Behind Sprayer TL-0 & TL-0SS Parts List This document is for TurfEx TL-0 and TL-0SS walk-behind sprayers beginning with serial numbers TG-000 and higher, or TH-000 and
More informationPower drill with 5/16 & 7/16 nut driver, 3/16 drill bit, framing square, tape measure and Sharpie.
2012HL Complete System Congratulations! You have just purchased a 2012HL Complete System from Hydrofarm, manufactured by American Hydroponics. This system is a small example of what big commercial growers
More informationREPUTE tube fittings are manufactured to stringent quality control program and internal standards which
Introduction: REPUTE tube fittings are manufactured to stringent quality control program and internal standards which assure the highest quality available in the industry. Two ferrule tube fittings are
More informationkyfor Your Utility Heating and Cooling
. kyfor Your Utility Heating and Cooling ky M-Series Plate Heat Exchangers Applications For your utility heating and cooling duties the industrial plate heat exchangers of Alfa Laval can be used. These
More informationFASTENERS FIRST LOOSEN WITHOUT TURNING!
FASTENERS FIRST LOOSEN WITHOUT TURNING! "Settling down" is the term ESNA laboratory people use to describe a relaxation phenomenon that occurs at room temperature under static conditions. During the first
More informationPRESSURE WASHERS Davis Road, Suite J Elgin, IL (800) Professional 2018 Price List
PRESSURE WASHERS 1150 Davis Road, Suite J Elgin, IL 60123 (800) 788-8867 info@lorchem.com www.lorchem.com Professional 2018 Price List 2018 For more information, contact Lorchem Technologies at: (800)
More informationCONSTRUCTION PRODUCT TECHNICAL CARD
CONSTRUCTION PRODUCT TECHNICAL CARD Product feature: Manufacturer: Flowmeter included ASPOL-FV Łódź, ul. Helska 39/45 www.aspol.com.pl Energeo product: SPIDER R Distributor well with multi-sectional manifolds
More informationElectromagnetic Flow Transmitter
Electromagnetic Flow Transmitter Sensor in solid state technology Working as a transmitter and/or as an On/Off controller Automatic-calibration of full scale: Teach-In Clean in place (CIP) Type can be
More informationThe transducer component converts the measured signal and displays the actual value.
Digital inductive conductivity transmitter System Integration Provides low Total Cost of Ownership PEEK/PPA version for CIP applications TEACH IN and SIMULATION Function Approval PVDF Version PEEK Version
More informationDynaPower Generation II
DynaPower Generation II Return to DYNAPOWER index Return to MAIN index GENERATION II 2.0 DYNAPOWER MODEL 2.0 VARIABLE PUMP PARTS DRAWING GENERATION II 2.0 DYNAPOWER MODEL 2.0 VARIABLE PUMP PARTS DRAWING
More informationthoroughly tried and tested! EWE Tapping Valves A single system for all types of pipes
thoroughly tried and tested! EWE Tapping Valves A single system for all types of pipes www.ewe-armaturen.de EWE Tapping Fittings high-quality products from Germany EWE tapping fittings are the product
More informationWESTERN STYLE STEEL. LATERAL COUPLER SET GALVANIZED Includes Band and Latch Assembly and Square Back Gasket
LATERAL COUPLER SET GALVANIZED Includes Band and Latch Assembly and Square Back Gasket 2" WBLCR200 3.00 lbs $ 29.48 3" WBLCR300 4.50 25.22 4" WBLCR400 6.00 41.85 *1" Outlet Standard, 3 4 " Available upon
More informationPart No. Original Part No. Original MPT No. FPT No. Description. Part No. Original Part No. Original MPT No. FPT No. Description
COUPLERS Legacy Quick Couplers Legacy Brass Couplers give Premium Performance with Economy Price. Legacy Quick Connect Couplings are machined from top grade materials to the same exacting specifications
More informationA. Compatibility: Products shall be suitable for piping service fluids, materials, working pressures, and temperatures.
SECTION 22 05 16 LOOPS FOR PLUMBING PIPING PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationOPTIFLUX 5000 Technical Datasheet
OPTIFLUX 5000 Technical Datasheet Electromagnetic flowmeter in flanged version Exceptional long-term stability and accuracy For highly aggressive and abrasive fluids Fully vacuum-resistant with high-tech
More informationMagnetic level indicators made in Australia under licence to Weka AG of Switzerland.
ABN 24 080 175 293 PO Box 212 Caringbah NSW 1495 Sydney Australia ph: +61 (0)2 9542 8977 fx: +61 (0)2 9542 7978 www.controlcomponents.com.au Magnetic level indicators made in Australia under licence to
More informationCONSTRUCTION PRODUCT TECHNICAL CARD
CONSTRUCTION PRODUCT TECHNICAL CARD Product feature: Manufacturer: Flowmeters included ASPOL-FV Łódź, Helska st.39/45 www.aspol.com.pl Energeo product: New BRADO R Distributor well with multi-sectional
More informationHigh-quality pressure transmitter For general industrial applications Model S-10
Electronic pressure measurement High-quality pressure transmitter For general industrial applications Model S-10 WIKA data sheet PE 81.01 for further approvals see page 4 Applications Machine building
More informationNote: Do not bury sulphur dioxide lines Use stainless steel pipe and fittings only where specified on project drawings.
1/7 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Liquid and High Pressure Gaseous Dry Sulphur Dioxide (Less than 100 ppm of water)
More informationLevel sensor Magnetostrictive, high-resolution measuring principle For sanitary applications, model FLM-H
Level measurement Level sensor Magnetostrictive, high-resolution measuring principle For sanitary applications, model FLM-H KSR data sheet FLM-H Applications Food and beverage industry Pharmaceutical industry
More informationMJK Expert 700 / 800 / 900 / 1100 / 2100 MJK Expert 1400 / 3400
Data Sheet MJK Expert 700 / 800 / 900 / 1100 / 2100 MJK Expert 1400 / 3400 Submersible Hydrostatic s Rugged and versatile We reserve the right to continuously improve our products and make any change in
More information4.3 Section CONDUIT INSTALLATION ACCESSORIES. Thinking of the environment. Fixing accessories Coupling accessories
CONDUIT INSTALLATION ACCESSORIES Thinking of the environment We use only fully recyclable halogen-free thermoplastics, without harmful additives. No cadmium or asbestos in the colourants either. For total
More informationIs Your Product Registered? Contact your Dealer to verify. Warranties are based on Registrations and reduced to 1 year without Registration.
Is Your Product Registered? Contact your Dealer to verify. Warranties are based on Registrations and reduced to 1 year without Registration. PARTS LIST B30L TURBO CONTENTS 1. MAIN BODY...1 ~ 2 2. GEARCASE...3
More informationElectronic Pressure Switch Type MEP
MAKING MODERN LIVING POSSIBLE Data sheet Electronic Pressure Switch Type MEP MEP 2200 and MEP 2250 versions: Dual output Output : Switch output Hysteresis % FS Time constant ms Output 2: Analogue output
More informationHygienic tube & process components
Hygienic tube & process components asme BPE ASME BPE De norm ASME BPE, or Bio Process Equipment is an integral description of all the process components for the bio-industry, including the guidelines
More informationSelf contained servo drive CLDP Technical data sheet
voith.com Self contained servo drive CLDP Technical data sheet Advantages + + High energy efficiency + + High dynamics + + Oil free power pack and piping are not necessary + + Sensors used provide the
More informationSS Band for increased durability (except 1/2 inch) 4000 PSI
COUPLERS Legacy Quick Couplers Legacy Brass Couplers give Premium Performance with Economy Price. Legacy Quick Connect Couplings are machined from top grade materials to the same exacting specifications
More informationGujarat Green Revolution Company Limited P. O. Fertilizernagar , Dist: Vadodara. Price List w.e.f. 06/02/2015
1 Non Return Valve, Low Friction a 1.5 " GM 778 No 731.60 b 2 " GM 778 No 1107.39 c 2.5 " GM 778 No 1483.17 d 3 " GM 778 No 1858.95 e 4 " CI 14846 No 2610.50 f 5 " CI 14846 No 3362.06 g 6 " CI 14846 No
More informationMODEL 1500, 2500 & 2700 MANUAL CONTROLS. Service Manual
MODEL 1500, 2500 & 2700 MANUAL CONTROLS Service Manual MODEL 1500, 2500 & 2700 MANUAL CONTROLS Manual Drive Assembly 1 11 2 6 7 9 10 8 PARTS LIST Item No. Quantity Part No. Description 1........... 1............
More informationEngineering Design & Power Training Institute
Engineering Design & Power Training Institute Recognition & Approvals Association of Power & Design Engineers (APDE) An ISO 9001: 2008 Certified Institute Courses P G Diploma in Piping Design & Details
More informationGujarat Green Revolution Company Limited P. O. Fertilizernagar , Dist: Vadodara.
1 Non Return Valve, Low Friction a 1.5 " GM 778 No 671.11 b 2 " GM 778 No 1015.83 c 2.5 " GM 778 No 1360.54 d 3 " GM 778 No 1705.26 e 4 " CI 14846 No 2394.67 f 5 " CI 14846 No 3084.09 g 6 " CI 14846 No
More informationGujarat Green Revolution Company Limited P. O. Fertilizernagar , Dist: Vadodara.
1 Non Return Valve, Low Friction a 1.5 " GM 778 No 661.04 b 2 " GM 778 No 1000.59 c 2.5 " GM 778 No 1340.13 d 3 " GM 778 No 1679.68 e 4 " CI 14846 No 2358.75 f 5 " CI 14846 No 3037.83 g 6 " CI 14846 No
More informationElectromagnetic Flow Measuring System Two-wire, loop-powered PROline promag 23 H
Technical Information TI 051D/06/en 50097004 Electromagnetic Flow Measuring System Two-wire, loop-powered PROline promag 23 H Flow measurement in hygiene, food and beverage or process applications Features
More information.1 Materials and installation for steel piping, valves and fittings for hydronic systems in building services piping..2 Related Sections.
Issued 2006/08/01 Section 15183 Hydronic Systems: Steel Page 1 of 6 PART 1 GENERAL 1.1 SUMMARY.1 Section Includes..1 Materials and installation for steel piping, valves and fittings for hydronic systems
More informationSTAUFF. Stauff-Connect Machinery & Services. Local Solutions for Individual Customers Worldwide
STAUFF Stauff-Connect Machinery & Services Local Solutions for Individual Customers Worldwide Introduction When developing pipework for any project, whether it be modest or a more signifi cant venture,
More informationOPTIFLUX 5000 Technical Datasheet
OPTIFLUX 5000 Technical Datasheet Electromagnetic flowmeter in flanged version Exceptional long-term stability and accuracy For highly aggressive and abrasive fluids Fully vacuum-resistant with high-tech
More informationSIT Group FLUE SYSTEMS
SIT Group LN PRODUCT LINE FLUE SYSTEMS Index Twin Flue System 80 2 Twin Flue System 60 8 Coaxial System 10 Flue System Kit 13 TWIN FLUE SYSTEM 80 SERIES CHARACTERISTICS Extruded aluminium tubes (alloy
More informationtubing & fittings section guide
tubing & fittings Increasing demands for purity and reliability make the correct selection of materials essential. Used in a wide range of applications and industries such as electronics, chemical processing
More informationGas-actuated combi-thermometer with Pt100 electrical output signal Model 76, stainless steel version
Mechatronic temperature measurement Gas-actuated combi-thermometer with Pt100 electrical output signal Model 76, stainless steel version WIKA data sheet TV 17.01 for further approvals see page 6 Applications
More informationHow to Order Manifold. Manifold mounting. DIN rail mounting style Direct mounting style
Plug Lead Unit Series 000 [Option] How to Order Manifold S 0 FD D Electrical entry F kit D-sub connector kit P kit Kit type Flat ribbon cable connector kit J kit Flat ribbon cable (0P) (PC Wiring System
More informationFlush pressure transmitter For viscous and solids-containing media Model S-11
Electronic pressure measurement Flush pressure transmitter For viscous and solids-containing media Model S-11 WIKA data sheet PE 81.02 Applications Machine building Hydraulic aggregates General industrial
More informationHYDRAULIC CONTROL DETAILS PARTS LIST
Always give model number, serial number and part number when ordering repair parts. HYDRAULIC CONTROL DETAILS PARTS LIST REF NO. PART NUMBER DESCRIPTION 1 101939 Hydraulic Tank 2 101940 Hydraulic Tank
More informationDX450 Red-D-Arc PARTS LIST FOR RETURN TO MAIN INDEX
Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies P-582 RETURN TO MAIN INDEX PARTS LIST FOR DX450 Red-D-Arc P-582 Index of Sub
More informationXEBEC AWARD 2008 Best Tip of the Year. How to operate XEBEC Cross-Hole Deburring Tool Alumina Fiber Rod Type with low speed lathes
AWARD 2008 Best Tip of the Year How to operate Cross-Hole Deburring Alumina Fiber Rod Type with low speed lathes When the spindle can bring up to max 4,000 rpm only, problem is solved by using the air
More informationPharma Temperature Sensor TFP-EX
SENSORS FOR AND BIO. Product Information TFP-EX Pharma Temperature Sensor TFP-EX Application/Specified Usage Temperature measurement: of liquid media in vessels and pipes suitable for applications in potentially
More informationIGC II Integrated Gas Components Substrates, Manifolds, Mounting Components, and Assembly Hardware
www.swagelok.com IGC II Integrated Gas Components Substrates, s, Mounting Components, ssembly Hardware IGC II Series. in. (. mm) c-ring modular design Compact footprint minimizes space requirements Lightweight,
More informationIn-Line Resistance Thermometers Model TR25
Electrical Temperature Measurement In-Line Resistance Thermometers Model TR25 WIKA Data Sheet TE 60.25 Applications Food and beverage industry, dairies, drink dispensers and bottling plants, breweries
More informationDigital flow ELEMENT transmitter for continuous flow measurement
ELEMENT Transmitter Digital flow ELEMENT transmitter for continuous flow measurement Type can be combined with... PN10, DN15 to DN400 fluidic process connection Programmable outputs : one or two transistor
More information2-JAW SELF-CENTERING RADIAL PNEUMATIC GRIPPER (SERIES PS)
PS 2-JAW SELF-CENTERING RADIAL PNEUMATIC GRIPPER (SERIES PS) Double-acting radial motion. The gripping force is constant throughout the entire stroke (from 0 to 90, both opening and closing). Lightweight:
More informationDiesel Pile Hammer D30-32 Part # 66508
Diesel Pile Hammer D30-32 Part # 66508 2 Diesel Pile Hammer D30-32 Part # 66508 Pos Order No Pg Description Qty 66508 Diesel Pile Hammer D30-32 cmpl 1 1 108742 4 Cylinder Lower Part cmpl 1 2 60151 Inner
More informationPaddle wheel flow controller for On/Off control
addle wheel flow controller for On/Off control Type 8032 compact Type 8032 can be combined with... Type 8032 remote Indication, monitoring, transmitting and On/Off control in one device. rogrammable outputs
More informationHow to Identify a PBM VALVE SERIES
How to Identify a PBM VALVE SERIES Series 0 (SP, DP, MP) 1. If it is a manual valve, the handle generally would be made of a cast iron or cast bronze. 2. If it is a manual valve, the stem at the very top
More informationEXPLODED VIEW OF KINNEY MODELS KC-5 & KC-8
EXPLODED VIEW OF KINNEY MODELS KC-5 & KC-8 KC-5 KC-8 Pump RPM 638 1022 Motor HP (kw) 0.33 (0.25) 0.50 (0.37) Oil Capacity, qts. (liters) 0.8 (0.76) Forced Drain w/ open suction, qts. (liters) 0.85 (0.80)
More informationProduct Catalogue. Ophthalmic Optics Spareparts. 1 Smart Smart Solutions Solutions for Professionals
Product Catalogue Ophthalmic Optics Spareparts 1 Smart Smart Solutions Solutions for Professionals for Professionals Content Content Revision and Retrofit Toro-X... 3 Spareparts Manual Polishing Machine...
More informationPrice $ $ $ Filtered compressed air, lubricated or non-lubricated
2-JAW SELF-CENTERING RADIAL PNEUMATIC GRIPPER (SERIES PS-P) Double-acting radial motion. The gripping force is constant through the entire stroke (from 0 to 90, both opening and closing). Lightweight:
More informationDigital flow ELEMENT transmitter for continuous flow measurement
Digital flow ELEMENT transmitter for continuous flow measurement Type 8036 can be combined with... DN06 to DN65 fluidic process connection Programmable outputs : one or two transistor output(s) and single
More informationINSTRUCTIONS FOR THE INSTALLATION AND THE USE OF THE PRESSURE TRANSDUCERS AND SWITCHES SERIES LP 650
INSTRUCTIONS FOR THE INSTALLATION AND THE USE OF THE PRESSURE TRANSDUCERS AND SWITCHES SERIES LP 650 Mod. S/N DS Europe Via F. Russoli, 6-20143 MILANO Tel. (02) 89.10.142 r.a - Instructions N 201296-E
More informationGeneral Information. Ball Curb Valve
General Information 1. All Jones Curb Valves are manufactured in accordance with the AWWA Standard C-800-latest revision. 1. Copper Alloy CDA No. C83600 (85-5-5-5) 2. Copper Alloy CDA No. 89520 (Low Lead)
More informationSTEEL. STEEL BAND AND LATCH COUPLER SET Press on Steel Band and Latch Mainline Sets Galvanized, includes Band and Latch.
*Western Style Available See Western Section LATERAL COUPLER SET GALVANIZED Includes Band and Latch Assembly and Round Back Gasket 2" BLCR200 3.00 lbs 3" BLCR300 4.50 4" BLCR400 6.00 *1" outlet standard,
More informationLF (Large Flange) Fittings - Adapters. (505)
LF (Large ) Fittings - dapters www.idealvac.com (505)72-007 Vacuum Fittings - dapters - olt Sets LF (Large ) ISO NW LF Specifications Max. Positive Pressure over pressure centering ring 0 psig Torque Rating
More informationAll Stainless Steel / SS Case Pressure Gauge
All Stainless Steel / SS Case Pressure Gauge 27L, 27B Series HAWK 27L and 27B series bourdon tube all stainless steel pressure gauges are designed to fulfill the requirements of high quality from various
More informationManufacturing Instructions
May 2016 Manufacturing Instructions Assembly and disassembly SN 200-6 ICS 25.020 Dimensions in mm Supersedes SN 200-6:2010-09 Table of contents Page 1 Scope... 1 2 Normative references... 1 3 Terms and
More informationUniCam Connector Critical Steps
UniCam Connector Critical Steps The UniCam connector has a fiber stub that is prepolished in the factory (Figure 1). To terminate, the field fiber must be stripped and cleaved, and must butt up against
More informationDiesel Hammer Model D19-42 Part #
Diesel Hammer Model D19-42 Part # 120491 2 Diesel Pile Hammer Part # 120941 Pos Order No. Pg Description Qty 120941 Diesel Pile Hammer D19-42 (Bauer MNR:426514) 1 160198 4 Cylinder Lower Part cmpl 1 2
More informationMineral-insulated resistance thermometers to EN
Data Sheet 90.2221 Page 1/6 Mineral-insulated resistance thermometers to EN 60 751 for temperatures from -50 (-200) to +600 C flexible sheath with shock-protected sensor as single or twin resistance thermometer
More informationAccessories for sensors
Accessories for sensors Mounting and installation Adapters for pressure sensors: Hex AF width 27 ZBM 01 Adapter female thread G1/4 male thread G1/2 B, DIN EN 837-1 Part no.: 257276 Flat seal ring Cu 6.2x17.5x2.0
More informationPlumbing Part II - Hand Pump
Plumbing Part II - Hand Pump Nelson Riedel Nelson@NelsonsLocomotive.com Initial: 7/17/03 Last Revised: 06/06/2004 The hand pump located in the tender water tank is a backup pump should the axel pump fail
More informationTHE GOOD GUIDE TO ELECTROFUSION JOINTING....Connect
THE GOOD GUIDE TO ELECTROFUSION JOINTING...Connect THE GOOD GUIDE TO ELECTROFUSION JOINTING This guide will provide basic information to enable the operative to: Equipment required: Understand the principles
More informationProcess transmitter Model UPT-20, with pressure port Model UPT-21, with flush diaphragm
Electronic pressure measurement Process transmitter Model UPT-20, with pressure port Model UPT-21, with flush diaphragm WIKA data sheet PE 86.05 Applications Process technology Machine building and plant
More informationBULLETIN E-RE-06. Sizes: 1-1/2" to 4" Absolutely Leak-tight Extremely Temperature-stable Best Surface Finish Easy Installation
BULLETIN E-RE-06 Sizes: 1-1/2" to 4" For Sizes 1/4" to 1" see Bulletin E-RE-01B, ZeroCon -Crown Absolutely Leak-tight Extremely Temperature-stable Best Surface Finish Easy Installation 1 Contents Technical
More informationCOPPER PLUMBING RANGE PRESS FIT / SWEAT FITTINGS
COPPER PLUMBING RANGE PRESS FIT / SWEAT FITTINGS PRODUCT CATALOGUE FOR PLUMBING RANGE. Index 1 Press Fittings 2-4 Pressure Bends S/R & L/R Engagement. 5 High Pressure Tees. 6 Concentric Reducers & Pressure
More informationIndumax CLS54D. Technical Information
Technical Information Indumax CLS54D Inductive conductivity sensor with hygienic design for applications in the food, beverage and pharmaceutical industries and in biotechnology Application The CLS54D
More informationFabricated Structural Steelwork. Section 8
Fabricated Structural Steelwork Section 8 INDEX DESCRIPTION FIGURE No. PAGE Pipe Shoe Welded Pipe Shoe Welded (Heavy Duty) Pipe Shoe Clamped Pipe Shoe Clamped (Heavy Duty) Inverted Tee Post Upright Tee
More informationDosimass. Technical Information. Coriolis Mass Flow Measuring System For filling applications
Technical Information Coriolis Mass Flow Measuring System For filling applications Application Suitable for use as a mass or volume flowmeter for filling applications. Liquids with the most diverse properties
More information