COPPER PLUMBING RANGE PRESS FIT / SWEAT FITTINGS
|
|
|
- Randolf Bailey
- 5 years ago
- Views:
Transcription
1 COPPER PLUMBING RANGE PRESS FIT / SWEAT FITTINGS
2 PRODUCT CATALOGUE FOR PLUMBING RANGE. Index 1 Press Fittings 2-4 Pressure Bends S/R & L/R Engagement. 5 High Pressure Tees. 6 Concentric Reducers & Pressure Connectors 7 Eccentric Reducers & End Caps... 8 Non Pressure Bends (plain & with inspection opening) 9 Pan Collars, Brazing Bushes & Cap & Liners. 10 Junction Bends, Junction Adaptors & Expansion Joints 11 Technical Information
3 CARRINGTON PRESS FITTINGS MANUFACTURED TO COMPLY WITH AUSTRALIAN STANDARDS AS3688 Press Equal Tee (101) TPF TPF TPF TPF TPF TPF Press Reducing Tee (102) RTPF RTPF RTPF RTPF RTPF RTPF RTPF RTPF RTPF RTPF RTPF RTPF W27RTPF W27RTPF W26RTPF Press 90 Elbow (Female-Female) (302) SRPF SRPF SRPF SRPF SRPF SRPF Press Reducing Coupling (501) RPCPF RPCPF RPCPF RPCPF RPCPF RPCPF RPCPF RPCPF RPCPF RPCPF RPCPF RPCPF 2.
4 CARRINGTON PRESS FITTINGS MANUFACTURED TO COMPLY WITH AUSTRALIAN STANDARDS AS3688 Press Coupling With Stop (502) PCPF PCPF PCPF PCPF PCPF PCPF Press Repair Coupling (No Stop) (506) SSPF SSPF SSPF SSPF SSPF SSPF Press 45 Elbow (Female-Female) SRPF SRPF SRPF SRPF SRPF SRPF Press 90 Elbow (Male-Female) MFPF MFPF MFPF MFPF MFPF MFPF Press Reducing Coupling (503) (Male-Female) PRPF PRPF PRPF PRPF PRPF PRPF 3.
5 CARRINGTONS PRESS FITTINGS MANUFACTURED TO COMPLY WITH AUSTRALIAN STANDARDS AS3688 Press Cap CPF CPF CPF CPF CPF CPF Press 45 Elbow (male-female) MFPF MFPF MFPF MFPF MFPF MFPF 11.
6 PRESSURE BENDS L/R & S/R ENGAGEMENT MANUFACTURED TO COMPLY WITH AUSTRALIAN STANDARDS AS3688 LARGE BORE FITTINGS (SHORT ENGAGEMENT) Description 90 Elbow S/R 10CL 10CL F & F SR 15CL 15CL F & F SR 18CL 18CL F & F SR 20CL 20CL F & F SR 25CL 25CL F & F SR 45 Elbow S/R 15Cl 15CL F & F SR 18CL 18CL F & F SR 20CL 20CL F & F SR 25CL 25CL F & F SR 90 Elbow L/R 15CL 15CL F & F LR 18CL 18CL F & F LR 20CL 20CL F & F LR 25CL 25CL F & F LR 90 Reduced bends 20CL 15CL F & F RB 20CL 18CL F & F RB 25CL 15CL F & F RB 25CL 20CL F & F RB Description End 1 End 2 Type Part No 90 Elbow (1D) DN-32 DN-32 F & F SR DN-40 DN-40 F & F SR DN-50 DN-50 F & F SR DN-65 DN-65 F & F SR DN-80 DN-80 F & F SR DN-100 DN-100 F & F SR 45 Elbow (1D) DN-32 DN-32 F & F SR DN-40 DN-40 F & F SR DN-50 DN-50 F & F SR DN-65 DN-65 F & F SR DN-80 DN-80 F & F SR DN-100 DN-100 F & F SR 90 Elbow (1.5D) DN-32 DN-32 F & F LR DN-40 DN-40 F & F LR DN-50 DN-50 F & F LR DN-65 DN-65 F & F LR DN-80 DN-80 F & F LR DN-100 DN-100 F & F LR DN-125 DN-125 F & F LR DN-150 DN-150 F & F LR DN-200 DN-200 F & F LR 45 Elbow (1.5D) DN-32 DN-32 F & F LR DN-40 DN-40 F & F LR DN-50 DN-50 F & F LR DN-65 DN-65 F & F LR DN-80 DN-80 F & F LR DN-100 DN-100 F & F LR DN-125 DN-125 F & F LR DN-150 DN-150 F & F LR DN-200 DN-200 F & F LR 5.
7 CARRINGTON HIGH PRESSURE TEE S MANUFACTURED TO COMPLY WITH AUSTRALIAN STANDARDS AS3688 DISCRIPTION END 1 END 2 END 3 TYPE PART No DN-10 DN-10 DN-10 No TEE EQUAL TEES DN-15 DN-15 DN-15 No TEE DN-18 DN-18 DN-18 No TEE DN-20 DN-20 DN-20 No TEE DN-25 DN-25 DN-25 No TEE DN-32 DN-32 DN-32 No TEE DN-40 DN-40 DN-40 No TEE DN-50 DN-50 DN-50 No TEE DN-65 DN-65 DN-65 No TEE DN-80 DN-80 DN-80 No TEE DN-100 DN-100 DN-100 No TEE DN-125 DN-125 DN-125 No TEE DN-150 DN-150 DN-150 No TEE DN-200 DN-200 DN-200 No TEE DN-15 DN-15 DN-10 No REDTEE REDUCING TEES DN-18 DN-18 DN-15 No REDTEE DN-20 DN-20 DN-15 No REDTEE DN-20 DN-20 DN-18 No REDTEE DN-25 DN-25 DN-15 No REDTEE DN-25 DN-25 DN-20 No REDTEE DN-32 DN-32 DN-15 No REDTEE DN-32 DN-32 DN-20 No REDTEE DN-32 DN-32 DN-25 No REDTEE DN-40 DN-40 DN-20 No REDTEE DN-40 DN-40 DN-25 No REDTEE DN-40 DN-40 DN-32 No REDTEE DN-50 DN-50 DN-20 No REDTEE DN-50 DN-50 DN-25 No REDTEE DN-50 DN-50 DN-32 No REDTEE DN-50 DN-50 DN-40 No REDTEE DN-65 DN-65 DN-40 No REDTEE DN-65 DN-65 DN-50 No REDTEE DN-80 DN-80 DN-50 No REDTEE DN-80 DN-80 DN-65 No REDTEE DN-100 DN-100 DN-50 No REDTEE DN-100 DN-100 DN-65 No REDTEE DN-100 DN-100 DN-80 No REDTEE DN-125 DN-125 DN-100 No REDTEE DN-150 DN-150 DN-100 No REDTEE DN-20 DN-15 DN-20 No W26RT DN-25 DN-15 DN-25 No W26RT DN-25 DN-20 DN-25 No W26RT DN-20 DN-15 DN-15 No W27RT DN-25 DN-20 DN-20 No W27RT DN-15 DN-15 DN-20 No REDTEE 6.
8 PRESSURE CONNECTORS & REDUCERS. MANUFACTURED TO COMPLY WITH AUSTRALIAN STANDARDS AS3688 DISCRIPTION END-1 END-2 TYPE PART No STRAIGHT CONNECTORS DN15 DN15 F & F PC DN18 DN18 F & F PC DN20 DN20 F & F PC DN25 DN25 F & F PC DN32 DN32 F & F PC DN40 DN40 F & F PC DN50 DN50 F & F PC DN65 DN65 F & F PC DN80 DN80 F & F PC DN100 DN100 F & F PC DN125 DN125 F & F PC DN150 DN150 F & F PC DN200 DN200 F & F PC REDUCING CONNECTORS DN15 DN10 F & F RPC DN18 DN15 F & F RPC DN20 DN15 F & F RPC DN20 DN18 F & F RPC DN25 DN15 F & F RPC DN25 DN20 F & F RPC DN32 DN20 F & F RPC DN32 DN25 F & F RPC CONCENTRIC REDUCERS DN15 DN10 M & F PR DN18 DN15 M & F PR DN20 DN15 M & F PR DN20 DN18 M & F PR DN25 DN15 M & F PR DN25 DN20 M & F PR DN32 DN15 M & F PR DN32 DN20 M & F PR DN32 DN25 M & F PR DN40 DN20 M & F PR DN40 DN25 M & F PR DN40 DN32 M & F PR DN50 DN20 M & F PR DN50 DN25 M & F PR DN50 DN32 M & F PR DN50 DN40 M & F PR DN65 DN32 M & F PR DN65 DN40 M & F PR DN65 DN50 M & F PR DN80 DN40 M & F PR DN80 DN50 M & F PR DN80 DN65 M & F PR DN100 DN50 M & F PR DN100 DN65 M & F PR DN100 DN80 M & F PR DN125 DN80 M & F PR DN125 DN100 M & F PR DN150 DN80 M & F PR DN150 DN100 M & F PR DN150 DN125 M & F PR DN200 DN125 M & F PR DN200 DN150 M & F PR DN250 DN200 M & F PR 7.
9 CARRINGTON ECCENTRIC REDUCERS MANUFACTURED TO COMPLY WITH AUSTRALIAN STANDARDS AS3688 SIZE END-2 TYPE PART No DN-40 DN-32 M & F ER DN-50 DN-32 M & F ER DN-50 DN-40 M & F ER DN-65 DN-50 M & F ER DN-80 DN-50 M & F ER DN-80 DN-65 M & F ER DN-100 DN-50 M & F ER DN-100 DN-65 M & F ER DN-100 DN-80 M & F ER DN-125 DN-80 M & F ER DN-125 DN-100 M & F ER DN-150 DN- 80 M & F ER DN-150 DN-100 M & F ER DN-150 DN-125 M & F ER DN-200 DN-150 M & F ER CARRINGTON COPPER CAPS SIZE DN-15 DN-20 DN-25 DN-32 DN-40 DN-50 DN-65 DN-80 DN-100 DN-150 DN-200 Part No 0127CAP 0190CAP 0254CAP 0318CAP 0381CAP 0508CAP 0635CAP 0762CAP 1016CAP 1524CAP 2032CAP 8.
10 CARRINGTON NON PRESSURE BENDS INSPECTION OPENING BENDS DISCRIPTION END-1 END-2 TYPE PART No COPPER DN-32 DN-32 F & F P DN-40 DN-40 F & F P 85 DEGREE DN-50 DN-50 F & F P ELBOW DN-65 DN-65 F & F P DN-80 DN-80 F & F P DN-100 DN-100 F & F P 85 DEGREE ELBOW + INSPECTION OPENINGS 45 DEGREE ELBOWS + INSPECTION OPENINGS 45 DEGREE ELBOWS DN-32 DN-32 F & F IO DN-40 DN-40 F & F IO DN-50 DN-50 F & F IO DN-65 DN-65 F & F IO DN-80 DN-80 F & F IO DN-100 DN-100 F & F IO DN-32 DN-32 F & F IO DN-40 DN-40 F & F IO DN-50 DN-50 F & F IO DN-65 DN-65 F & F IO DN-80 DN-80 F & F IO DN-100 DN-100 F & F IO DN-32 DN-32 F & F P DN-40 DN-40 F & F P DN-50 DN-50 F & F P DN-65 DN-65 F & F P DN-80 DN-80 F & F P DN-100 DN-100 F & F P 9.
11 CARRINGTON BRAZING BUSHES BRAZING BUSHES SIZE Part No (M) Part No (F) DN MI FI DN MI FI DN MI FI DN MI FI DN MI FI DN MI FI DN MI FI CARRINGTON CAP & LINERS CAP & LINERS Plain or Reducing SIZE SIZE Part No DN-32 DN CL DN-40 DN CL DN-50 DN CL DN-50 DN CL CARRINGTON PAN COLLARS-RUBBERS-CLIP PAN COLLARS RUBBERS CLIPS Type Bare Complete Male 1016MPCO 1016MPCC Female 1016FPCO 1016FMCC Rubber Seal 1016PANRUB - Stainless Steel Clip 1016PANCLIP - 10.
12 CARRINGTONS NON PRESSURE FITTINGS JUNCTION BENDS SIZE DN-32 DN-40 DN-50 DN-65 DN-80 DN-100 Part No JB JB JB JB JB JB INVERTED JUNCTION BEND SIZE DN-32 DN-40 DN-50 DN-65 DN-80 DN-100 Part No IJB IJB IJB IJB IJB IJB SWEEP JUNCTION ADAPTER SIZE Part No DN SJA DN SJA DN SJA DN SJA DN SJA DN SJA EXPANSION JOINT SIZE DN-50 DN-65 DN-80 DN-100 Part No EJ EJ EJ EJ 11.
13 Tube manufactured to AS Safe working pressure table (ref Crane Enfield Metals) TYPE A TYPE B TYPE C TYPE D NOMINAL SIZE ACTUAL SIZE SAFE WORKING WEIGHT PRESSURE (KPA) METRIC IMPERIAL UP TO 50 C KG PER MTR DN x 0.91 ¼ x 20g DN x /16 x 20g DN x /8 x 19g DN x 1.02 ½ x 19g DN x /8 x 18g DN x 1.42 ¾ x 17g DN x x 16g DN x /4 x 16g DN x /2 x 16g DN x x 16g DN x /2 x 16g DN x x 14g DN x /2 x 14g DN x x 14g DN x x 14g DN x x 12g DN x x 12g DN x 0.71 ¼ x 22g DN x /16 x 22g DN x /8 x 20g DN x 0.91 ½ x 20g DN x /8 x 19g DN x 1.02 ¾ x 19g DN x x 18g DN x /4 x 18g DN x /2 x 18g DN x x 18g DN x /2 x 18g DN x x 16g DN x /2 x 16g DN x x 16g DN x x 16g DN x x 14g DN x x 14g DN x /8 x 22g DN x 0.71 ½ x 22g DN x /8 x 20g DN x 0.91 ¾ x 20g DN x x 20g DN x /4 x 20g DN x /2 x 20g DN x x 20g DN x /2 x 20g DN x x 18g DN x /2 x 18g DN x x 18g DN x x 17g DN x x 16g
14 ADMINISTRATION AND MANUFACTURING Melbourne Road P.O Box 266 Riverstone NSW Australia 2765 Phone: Warehouse Phone: Fax: WEBSITE CARRINGTON PRODUCTS ABN
4.3 Section CONDUIT INSTALLATION ACCESSORIES. Thinking of the environment. Fixing accessories Coupling accessories
CONDUIT INSTALLATION ACCESSORIES Thinking of the environment We use only fully recyclable halogen-free thermoplastics, without harmful additives. No cadmium or asbestos in the colourants either. For total
tubing & fittings section guide
tubing & fittings Increasing demands for purity and reliability make the correct selection of materials essential. Used in a wide range of applications and industries such as electronics, chemical processing
Products catalogue (I-P Edition)
Products catalogue (I-P Edition) Products catalogue (I-P Edition) FROM QUALITY OUR NATURAL DEVELOPMENT Active in the industry of Refrigeration and Air Conditioning for fifty-five years, Castel is well-established
CARBON STEEL BUTTWELD FITTINGS STD & XH Carbon Steel Buttweld Pipe Fitting List Prices (SBW-0118)
CARBON STEEL BUTTWELD FITTINGS STD & XH Carbon Steel Buttweld Pipe Fitting List Prices (SBW-0118) Manufacturing Facility is ISO9001:2000 Fittings Pressure Tested & Straightness Tested Dimensions Conform
Stock Programme Scope of Supply. v
Scope of Supply v2.10 2018 Pipe: Seamless Stainless Steel ASTM A312 ASME B36.19 TP316/316L DN15 DN250 10S 160 Stainless Steel ASTM A312 ASME B36.19 TP304/304L DN15 DN200 10S 160 Low Temp ASTM A333 ASME
International Tube & Conduit Company Ltd. BRITISH STANDARD STEEL CONDUITS & FITTINGS
International Tube & Conduit Company Ltd. BRITISH STANDARD STEEL CONDUITS & FITTINGS 1 ABOUT THE COMPANY VISION STATEMENT We strive to exceed our customers expectations through leading edge technologies
Gas-actuated combi-thermometer with Pt100 electrical output signal Model 76, stainless steel version
Mechatronic temperature measurement Gas-actuated combi-thermometer with Pt100 electrical output signal Model 76, stainless steel version WIKA data sheet TV 17.01 for further approvals see page 6 Applications
SOCKET & NIPPLE. Quality products for a quality environment BSP THREADED FITTINGS - PP. Code K12. Socket - equal Injection moulded.
BSP THREADED FITTINGS - PP SOCKET & NIPPLE Code K12 Socket - equal 1/2 to 3 Material: PP black Socket - reduced 1/2 up to 4 in various increments Material: PP black Nipple - equal 1/2 to 4 Material: PP
Copper Tube L AIR CONDITIONING & REFRIGERATION COPPER TUBE AS/NZS 1571 ASTM B280 BSEN
Copper Tube L AIR CONDITIONING & REFRIGERATION COPPER TUBE AS/NZS 1571 ASTM B280 BSEN 12735 www.kembla.com.au Copper Tube L MM Kembla has been providing our customers with the highest quality and most
MIG/MAG Welding Torch ABIMIG 645 W liquid-cooled
MIG/MAG Welding Torch ABIMIG 645 W liquid-cooled C E R DIN EN ISO 9001 Q M T - I F S I Y E T S D E M ABICOR BINZEL. The right welding torch for every job! BINZEL air cooled welding torches incorporate
Forming and Assembling Pipework Systems F/508/4663
Unit Title Ofqual unit reference number (code) Organisation Reference Forming and Assembling Pipework Systems F/508/4663 QU051481 Unit Level Level 2 Unit Sub Level None GLH 64 Unit Credit Value 14 Sector
Hydraulic Adapters STEEL PIPE ADAPTERS NPTF DRY SEAL PIPE ASSEMBLY INSTRUCTIONS. Steel Pipe Adapters. Steel Pipe Adapters. Hydraulic.
CONFORMANCE SAE J54 for hex nipples, expanders, elbows, tees and crosses SAE J54, J50 and J5 for bushing and plugs. Temperature Range -65 0 F to +400 0 F MATERIALS - SAE L4 carbon steel plated zinc with
Brass Compression Fittings
15 Brass Compression Fittings Product Applications For use with potable water, instrumentation, hydraulic and pneumatic systems. Designed to be used with aluminum, copper and plastic tubing. Not recommended
Forming and assembling pipework systems
Unit 007 Forming and assembling pipework systems Level: 2 Credit value: 14 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to cover a
SECTION EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING
SECTION 230516 - EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
REPUTE tube fittings are manufactured to stringent quality control program and internal standards which
Introduction: REPUTE tube fittings are manufactured to stringent quality control program and internal standards which assure the highest quality available in the industry. Two ferrule tube fittings are
The One Stop Shop for Automotive Plumbing
BQAP-0110 INNOVATIVE SOLUTIONS FOR AUTOMOTIVE PLUMBING The One Stop Shop for Automotive Plumbing Lab Tested - Tuff! AUTOMOTIVE PLUMBING Catalog www.brakequip.com Copyright 2010 $1.50 USA BRAKEQUIP Tube
WIRE MESH CABLE TRAY
2014 WIRE MESH CABLE TRAY INSTALLATION GUIDE (CABLE BASKET) WIRE MESH CABLE TRAY (CABLE BASKET) PRODUCT INFORMATION - MAIN UNIT TECHNICAL PARAMETERS Materials Surface Finishing Thickness of coating Application
QCF Unit and Assessment Specification
QCF Unit and Assessment Specification Unit title Ofqual Unit code Forming and Assembling Pipework Systems T/600/5855 SQA Unit code FT2X 60 SSC Ref Unit 82 History of changes Publication date: March 2012
Ltd.) is India s leading manufacturer of PVC-U Pipes & Fittings. Our pipes & fittings are available in a vast range of sizes.
+91-8042952415 Finolex Pipes & Fittings (Unit Of Finolex Industries Limited) https://www.indiamart.com/finolex-pipes-fittings/ Finolex Pipes & Fittings (Unit Of Finolex Industries Ltd.) is India s leading
FITTINGS. Pneufit C composite and Pneufit M fittings Metric Ø 3 to 16 mm O/D tube
Ø 3 to 16 mm Releasable stainless-steel grab-ring to grip nylon or polyurethane (8 or 9 durometer). Nickel plated brass components. Pre-applied thread sealant on all taper threads and recessed captive
NEWLONG. r PORTABLE FILLED BAG CLOSING MACHINE NEWLONG MACHINE WORKS, LTD.
NEWLONG r PORTABLE FILLED BAG CLOSING MACHINE * NEWLONG MACHINE WORKS, LTD. () THREAD TENSION AND COVER PARTS 0 () THREAD TENSION AND COVER PARTS Ref. No. Part No. Description Q ty Remarks 5 6 7 8 9 0
Thread and Connector Identification
How to Use this Section This section is intended as an aid to identifying the most popular threads on hydraulic hose couplings and adaptors, and hydraulic equipment. BSP, Metric, American and Japanese
RECTANGULAR TRAY. AIM: To prepare a Rectangular tray of given dimensions (l = 120 mm, b = 80 mm, h=24 mm) using a galvanized iron sheet.
RECTANGULAR TRAY AIM: To prepare a Rectangular tray of given dimensions (l = 120 mm, b = 80 mm, h=24 mm) using a galvanized iron sheet. MATERIAL REQUIRED: galvanized iron sheet of 180 mm x 140 mm TOOLS
MIG/MAG Fume Extraction Torch RAB Plus 240 D liquid-cooled. New, lighter, more flexible... BINZEL. The right welding torch for every job!
MIG/MAG Fume Extraction Torch RAB Plus 240 D liquid-cooled New, lighter, more flexible... C E R DIN EN ISO 9001 Q M T - I F S I Y E T S D E M BINZEL. The right welding torch for every job! BINZEL liquid-cooled
Brazing Fittings. Cover. An introduction to the range and applications KM BSS BOSS Brazing Fitting Brochure_V8.indd 1
Brazing Fittings Cover An introduction to the range and applications 81513 KM BSS BOSS Brazing Fitting Brochure_V8.indd 1 15/12/2014 16:04 Contents Introduction Introduction 3 Performance and equipotential
AS/NZS :2011. Gate valves for waterworks purposes AS/NZS :2011. Part 2: Resilient seated. Australian/New Zealand Standard
Incorporating Amendment No. 1 Australian/New Zealand Standard Gate valves for waterworks purposes Part 2: Resilient seated This joint Australian/New Zealand standard was prepared by joint Technical Committee
Durapipe ABS Jointing Guide
Durapipe ABS Jointing Guide Solvent cement welding offers a simple and quick means of constructing high integrity, leak-free joints. The solvent cement operates by chemically softening the joint surfaces.
The Trade Fittings Product Guide
The Trade Fittings Product Guide 6/7 Empire Centre Watford Herts WD24 4YH 01923 233330 www.brandsofwatford.co.uk Introduction Welcome to the new edition of our Fittings Product Guide. This edition gives
CONDUIT, FITTINGS & SADDLES
CONDUIT, FITTINGS & SADDLES GC Conduit & Fittings...244 SS Fittings... 251 150 Series Conduit & Fittings...252 Galvanised Flexible Conduit & Fittings...253 Galvanised & Stainless Steel Saddles... 257 P:
Essex County College - West Essex Campus Addition And Renovations dlb # / SECTION EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING
SECTION 230516 - EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING PART I - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
Pipe & Fittings - PVC / Copper / Black
Section 9 Pipe & Fittings - PVC / Copper / Black INDEX PVC PVC - SDR 21 PIPE. 9-2 PVC - Pressure Fittings 9-2 PVC - Pressure Traps... 9-3 PVC - DWV SCH 40 Pipe.. 9-3 PVC - DWV SCH 40 Fittings.. 9-3 PVC
Piper GI Conduits. Heavy Gauge Welded GI Conduit, threaded
Piper GI Conduits Piper GI Conduits from Eurotube is a range of Conduits manufactured from high grade galvanized steel. The products are available in class 4 hot dipped galvanized, black enameled and class
PARTS LIST FOR MODEL 7000 SERIES - 17/46
ITEM PARTS LIST FOR MODEL 7000 SERIES - 17/46 1 Rotor 3 Housing 1 4 End Plate 6 Drive End Cover 1 7 Free End Cover 1 8 Timing Gear Set 1 9 Bearing, Drive End 10 Bearing, Free End 1 Lip Seal, Viton 4 13
THE CASCADE & SLINGER FUNSLIDES
THE CASCADE & SLINGER FUNSLIDES ASSEMBLY AND INSTALLATION INSTRUCTIONS * * C A U T I O N * * S.R. SMITH CASCADE TM & SLINGER TM FUNSLIDES TM ARE MANUFACTURED FOR INSTALLATION AND USE ON RESIDENTIAL INGROUND
For Frequencies up to 110 GHz. RPC-1.00 Connectors TEST & MEASUREMENT
For Frequencies up to 110 GHz RPC-1.00 Connectors TEST & MEASUREMENT degs Bending test of RPC-1.00 cable assembly, standard length Bending Test 90 @ R = 1 inch Difference of phase (before-after bending)
METRIC/IMPERIAL INSTALLATION INSTRUCTIONS
METRIC/IMPERIAL INSTALLATION INSTRUCTIONS 1. Cut the Pipe Square Cut the pipe square. There is no need to prepare the pipe end. Chamfering or lubrication is not required. 2. Insert Liner in MDPE pipe With
General Information. Ball Curb Valve
General Information 1. All Jones Curb Valves are manufactured in accordance with the AWWA Standard C-800-latest revision. 1. Copper Alloy CDA No. C83600 (85-5-5-5) 2. Copper Alloy CDA No. 89520 (Low Lead)
PLUMBING AND GAS PRODUCTS
BARCLAY ENGINEERING LTD PRODUCTION SPECIALISTS OF BRASSWARE,ALUMINIUM &STAINLESS STEEL 14-1 HORLOR STREET NAENAE P.O. BOX 3501 NAENAE LOWER HUTT 5041 NEW ZEALAND Phone: Fa: (04) 3 500 (04) 3 505 www.barclayengineering.co.nz
MIG/MAG Welding Torch MB 26 KD air-cooled
MIG/MAG Welding Torch MB 26 KD air-cooled C E R DIN EN ISO 9001 Q M T - I F S I Y E T S D E M BINZEL. The right welding torch for every job! BINZEL air cooled welding torches incorporate the high quality
For VNA Test Applications. Test Port Adaptors TEST & MEASUREMENT
For VNA Test Applications Test Port Adaptors TEST & MEASUREMENT Test Port Adaptors for VNA Applications Rosenberger offers a wide range of ruggedized test port adaptors for VNA (Vector Network Analyzer)
FLARE COMPRESSION CPVC IRON PIPE HOSE BARB GARDEN HOSE DRAIN/SHUT-OFF COCKS NEEDLE & HUMIDIFIER VALVES
Brass Fittings Innovative solutions delivered Better engineering, better selection, better results FLARE COMPRESSION CPVC IRON PIPE HOSE BARB GARDEN HOSE DRAIN/SHUT-OFF COCKS NEEDLE & HUMIDIFIER VALVES
5.1 MUELLER CORPORATION VALVES. MUELLER 300 Ball Type Corporation Valves
MUELLER CORPORATION VALVES 5.1 Shaded area indicates changes Rev. 4-14 Machine inserted corporation stops were developed by Hieronymus Mueller in conjunction with his development of the drilling and tapping
Unisource Uni-Loops For Seismic & Thermal Pipe Motion
Unisource Uni-Loops For eismic & Thermal Pipe Motion pecified by consulting engineers and building owners and installed by contractors throughout the world for many years, Unisource Uni-Loops solve the
Gujarat Green Revolution Company Limited P. O. Fertilizernagar , Dist: Vadodara.
1 Non Return Valve, Low Friction a 1.5 " GM 778 No 661.04 b 2 " GM 778 No 1000.59 c 2.5 " GM 778 No 1340.13 d 3 " GM 778 No 1679.68 e 4 " CI 14846 No 2358.75 f 5 " CI 14846 No 3037.83 g 6 " CI 14846 No
M-5 PRO CORE BORE PARTS LIST DRILLING MACHINE. (March 2017) Part #
M- PRO CORE BORE DRILLING MACHINE PARTS LIST (March 07) Part #809 Table of Contents Description Page No. Carriage Assembly....... - Combo Base Assembly....... - 7 Anchor Base Assembly........8 Anchor
Plumbing Part II - Hand Pump
Plumbing Part II - Hand Pump Nelson Riedel Nelson@NelsonsLocomotive.com Initial: 7/17/03 Last Revised: 06/06/2004 The hand pump located in the tender water tank is a backup pump should the axel pump fail
Resistance Thermometers Model Series TR7X0, Sheathed Design
Electrical Temperature Measurement Resistance Thermometers Model Series TR7X0, Sheathed Design WIKA Data Sheet TE 60.40 Applications T Suitable for all industrial and laboratory applications Special Features
FLARELESS SEPARABLE FITTING
FLARELESS SEPARABLE FITTING DESIGN CONCEPT: The concept of Flareless provides positive sealing and a high degree of sealing reliability for repeated usage. The configuration of Flareless joint consists
Union coupling, copper x female thread. Cone joint
Union coupling, copper x female thread. Cone joint N69F Union coupling Size Pattern No. Pack 1 Qty Pack 2 Qty Code Barcode Price ( ) ex VAT test 15mm x 1/2" N69F 10 100 84842D 5022050269638 3589.48 22mm
KMS305W. ManuFlo Page 1 MANU ELECTRONICS PTY LTD Flow Measurement Products. Electromagnetic Wafer Flowmeters with S300 display
Electromagnetic Wafer Flowmeters with S300 display for corrosive chemicals/acids & slurries (sizes: 2.5mm to 100mm) 0BFEATURES: For aggressive chemicals, slurries, oxides, grouts & dosing applications
PROTEM Tube and pipe beveling ID CLAMPING BEVELING MACHINES FOR TUBES, PIPES AND BOILER TUBES
PROTEM Tube and pipe beveling ID CLAMPING BEVELING MACHINES FOR TUBES, PIPES AND BOILER TUBES US-40 PRACTICAL TOOLS INC. P.O. Box 233 Aurora, ON L4G 3H3, Canada Phone: 905-727-0014 / 888-847-8880 Fax:
HYDRAULIC CONTROL DETAILS PARTS LIST
Always give model number, serial number and part number when ordering repair parts. HYDRAULIC CONTROL DETAILS PARTS LIST REF NO. PART NUMBER DESCRIPTION 1 101939 Hydraulic Tank 2 101940 Hydraulic Tank
MIG/MAG Welding Torch ABIMIG 401 WT / ABIMIG 501 WT liquid-cooled, with divided liner
MIG/MAG Welding Torch ABIMIG 401 WT / ABIMIG 501 WT liquid-cooled, with divided liner C E R DIN EN ISO 9001 Q M T - I F S I Y E T S D E M BINZEL. The welding torch for every job! BINZEL liquid cooled welding
Fitting C.O. Adapter
ABS-DWV Fittings ABS/DWV Service Weight Pipe Schedule 30 Single step solvent cementing procedures no primer required. Excellent solvent cementing characteristics. Black. 84/Ctn. x h Hub Sanitary 0321612
Click here to download the full catalogue. moddex systems
Click here to download the full catalogue moddex systems 3 Robust and durable protection for workers across mezzanines, service platforms and hazardous roof service areas. 2 Moddex Group. All rights reserved.
Australian Standard. Precast reinforced concrete box culverts. Part 1: Small culverts (not exceeding 1200 mm width and 900 mm depth) AS 1597.
AS 1597.1 1974 Australian Standard Precast reinforced concrete box culverts Part 1: Small culverts (not exceeding 1200 mm width and 900 mm depth) The following industrial and governmental organizations
Vinidexair THE BLUE AIR PRESSURE PIPING SYSTEM
Vinidexair THE BLUE AIR PRESSURE PIPING SYSTEM Vinidexair - the blue air pressure piping system Compressed air should be handled with respect. Now there is a poly pipe designed specifically to handle compressed
FITTINGS & GAUGES 20,000 PSI
PRESSURE GAUGE Features 4" high visibility face with laminated safety glass dial cover Accurate within +/- 0.5% of full scale range Stainless steel case and internals Heavy-duty movement Glycerine-filled
WESTERN STYLE STEEL. LATERAL COUPLER SET GALVANIZED Includes Band and Latch Assembly and Square Back Gasket
LATERAL COUPLER SET GALVANIZED Includes Band and Latch Assembly and Square Back Gasket 2" WBLCR200 3.00 lbs $ 29.48 3" WBLCR300 4.50 25.22 4" WBLCR400 6.00 41.85 *1" Outlet Standard, 3 4 " Available upon
PureFlow PEX Crimp Zero Lead Fittings for Use with Viega PureFlow Tubing. Potable Water. Other
Project: Engineer: Contractor: Submitted By: Potable Water Other 1 of 10 Technical Data Materials: Fittings... Eco Brass or Polymer Crimp Rings... Copper (black) MANABLOC Manifolds... Polysulfone (plastic)
Operating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4
Operating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-320038 Ph.: 800-274-6848 Revision H 01/2016
ICC INDUSTRIAL CHIMNEY COMPANY INC. ST-JEROME, QUÉBEC, CANADA, J7Y 4B7 TEL: (450) FAX: (450)
ICC INDUSTRIAL CHIMNEY COMPANY INC. ST-JEROME, QUÉBEC, CANADA, J7Y 4B7 TEL: (450) 565-6336 FAX: (450)565-6519 www.icc-rsf.com INSTALLATION AND OPERATION INSTRUCTIONS "Model VIP" CHIMNEY TYPE: FACTORY BUILT
DETAIL SPECIFICATION SHEET FITTINGS - INSTALLATION OF FLARED TUBE, STRAIGHT, THREADED CONNECTORS, DESIGN STANDARD FOR
INCH-POUND MS21344A 4 October 2016 SUPERSEDING MS21344 17 August 1971 DETAIL SPECIFICATION SHEET FITTINGS - INSTALLATION OF FLARED TUBE, STRAIGHT, THREADED CONNECTORS, DESIGN STANDARD FOR This specification
content Introduction Some good reasons to use SMARTr products Reducers, Plugs Conduit Reducer Stopping Plug
CONTENT 1 2 Introduction Some good reasons to use SMARTr products G.I. CONDUITS SMARTr BS4568 : PT1 : 1970 Class 4, IEC 61386-21 : 2004 IEC60614-2 - 1 : 1993, BS EN 50086-2 -1 : 1996 SMARTr BS4568 : PT1
HBK INTERNATIONAL AN ISO 9001 : 2015 CERTIFIED COMPANY
HBK INTERNATIONAL AN ISO 9001 : 2015 CERTIFIED COMPANY Who We Are By ge ng enormous success in the Domes c Market under the firm name "M/s Nyals Brass Products", today we are one of the compe ve players
A. Compatibility: Products shall be suitable for piping service fluids, materials, working pressures, and temperatures.
SECTION 22 05 16 LOOPS FOR PLUMBING PIPING PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
MODEL D DIESEL PILE HAMMER
AMERICAN PILEDRIVING EQUIPMENT, INC. MODEL D125-42 DIESEL PILE HAMMER SPARE PARTS BOOK Corporate Office 7032 S. 196th Street Kent, WA, USA 98032 Tel: 1-800-248-8498 Tel: 1-253-872-0141 Fax: 1-253-872-8710
ASME BPE 2014 DT Range of Bioprocessing Fittings
SME PE 2014 DT Range of ioprocessing Fittings lchem Process Ltd offer the full range of SME PE ioprocessing Fittings in both SF1 and SF4 surface finishes. The standard provides a good manufacturing guide
HYDRAULIC STEEL BRAKE LINES
36 B9 MISCELANEOUS HYDRAULIC STEEL BRAKE LINES DOMESTIC CAR AND TRUCK STANDARD INVERTED FLARE BOTH ENDS HYDRAULI STEEL BRAKE LINE B9-HL3008 3/16" 8" 10 B9-HL3012 3/16" 12" 10 B9-HL3020 3/16" 20" 10 B9-HL3030
Gujarat Green Revolution Company Limited P. O. Fertilizernagar , Dist: Vadodara. Price List w.e.f. 06/02/2015
1 Non Return Valve, Low Friction a 1.5 " GM 778 No 731.60 b 2 " GM 778 No 1107.39 c 2.5 " GM 778 No 1483.17 d 3 " GM 778 No 1858.95 e 4 " CI 14846 No 2610.50 f 5 " CI 14846 No 3362.06 g 6 " CI 14846 No
THE ROGUE TM FUNSLIDE TM
THE ROGUE TM FUNSLIDE TM ASSEMBLY AND INSTALLATION INSTRUCTIONS * * C A U T I O N * * S.R. SMITH ROGUE TM FUNSLIDES TM ARE MANUFACTURED FOR INSTALLATION AND USE ON RESIDENTIAL INGROUND POOLS ONLY. ROGUE
TYPE "B" GAS VENT. Do not connect gas vent to a solid or liquid fuelled appliance or any appliance requiring a chimney.
TYPE "B" GAS VENT SD (sizes 3", 4", 5", 6", 7") INSTALLATION INSTRUCTIONS Type "B" Gas Vents are strictly for interior or enclosed exterior use or exterior use above a roof line. Read vent and appliance
Gujarat Green Revolution Company Limited P. O. Fertilizernagar , Dist: Vadodara.
1 Non Return Valve, Low Friction a 1.5 " GM 778 No 671.11 b 2 " GM 778 No 1015.83 c 2.5 " GM 778 No 1360.54 d 3 " GM 778 No 1705.26 e 4 " CI 14846 No 2394.67 f 5 " CI 14846 No 3084.09 g 6 " CI 14846 No
Measuring Pipes and Pipe Fittings
Measuring Pipes and Pipe Fittings by Larry Johnston When you repair or modify home plumbing, knowing the kind and size of pipe you need can save you time and trouble not to mention trips to the hardware
RG Connector (Molded Mating Extension Cable Required) A H B G. MS Connector (Mating Connector: P/N ; MS3116F-12-10S or Extension Cable)
T E M P O S O N I C S L S E R I E S INSTALLATION A N A L O G O U T P U T 550570 B W I R I N G - A N A L O G O U T P U T S RG Connector: (Voltage or Current Output) 1 Gray 0 to 10 Vdc, 4 to 20 ma, or 0
MEFA mounting accessories
MEFA mounting accessories Mounting accessories Base plates Page 5/2 Double holder Page 5/4 Height-adjustable suspensions Page 5/5 Pendular bolt joints Page 5/6 Trapeze hanger Page 5/7 Threaded hooks, distance
SECTION CABLE TRAYS FOR COMMUNICATIONS SYSTEMS
SECTION 270536 - CABLE TRAYS FOR COMMUNICATIONS SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
INSTALLATION GUIDELINES
STYLE No. DSXS20 with 8 Shower Head and Metal Cross Handles STYLE No. DSXS2C System with Metal Cross Handles STYLE No. DSXS30 with 8 Shower Head, Metal Lever and Cross Handle STYLE No. DSXS3C System with
THE OZIPOLE Mk II A Portable Multiband Dipole Bob VK5AFZ
THE OZIPOLE Mk II A Portable Multiband Dipole Bob VKAFZ Many amateurs might be familiar with the Ozipole, a small portable loaded dipole for the m to m bands. It was designed by Peter VKEVB and supplied
Ford Water Meter Couplings & Accessories
Section H 2/2001 Ford Water Meter Couplings & Accessories The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260/563-3171 FAX: 1-800-826-3487 Overseas
HC Hydraulic Expansion Chucks
Technical Information HC Hydraulic Expansion Chucks design, function, effect, and application features, handling, and action application instructions precision tool length setting torques accessories sealed
IF YOU DON T SEE IT HERE
www.smithfast.com Drills & Taps & Bits Screws Cotter Drilling Bolts / Hex Capscrews Lag Carraige Hitch Grade 8 Machine Grade Elevator 5 Sheet Spring Metal Roll Grade Eye 2 Square Taper Head set A325 Hex
pricelist Potable Piping System Radiant Piping System PEX-0908 BOW SUPERPEX Made with TempRite Resin SEPTEMBER 2008 Page 1
SEPTEMBER 2008 Page 1 Potable Piping System is designed with three distinct layers for ultimate protection. The middle layer provides chlorine resistance as well as UV light exposure resistance plus the
240 Owner s Manual & Parts Book
0 Owner s Manual & Parts Book Purchase Date Serial Number Model Number Tractor Model Dealer PN: 3-188 Serial #:083-88, 0, 07-... Date --0 Contents Description Page To The Owner, Maintenance Safety Precautions
Operating Instructions For Lockformer Button Punch Flanger
Capacity: 20 to 28 Gauge Galvanize Operating Instructions For Lockformer Button Punch Flanger To satisfactorily form the 90º button punch flange on light gauge materials, it was necessary to form the metal
The world s largest producer of copper product
The world s largest producer of copper product SPK proudly and exclusively represents Hailiang NZS3501 copper tubes and fittings in NZ. Hailiang is the world s largest manufacturer of copper products with
PIPING NOMENCLATURE. Header Branch connection Valve Flange Expansion joint Expansion loop Pipe support Reducer Elbow
PIPING COMPONENTS Piping components are mechanical elements suitable for joining or assembly into pressure-tight fluid containing piping systems. Components include pipe, tubing, fittings, flanges, gaskets,
Repair Parts Sheet A UNIT OF APPLIED POWER INC. Electric PumpsPER2321/PER2341/4003 L-833 REV. O 05/98 PC For Date Codes Beginning With "O"
Repair Parts Sheet A UNIT OF APPLIED POWER INC. L-833 REV. O 05/98 PC 5240 Electric PumpsPER2321/PER2341/4003 For Date Codes Beginning With "O" Figure 1 - Parts List 1 1 Nameplate 2 Y697003 4 Pop Rivet
INLINE flowmeter for continuous flow measurement
INLINE flowmeter for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both PNP and NPN) Connection
the solution for your octagonal ducts
C the solution for your octagonal ducts C P3ductal smart8: fast, insulated and economical Where to use P3ductal smart8 The new smart8 solution for octagonal ducts is efficient, economical and ideal for
STAUFF. Stauff-Connect Machinery & Services. Local Solutions for Individual Customers Worldwide
STAUFF Stauff-Connect Machinery & Services Local Solutions for Individual Customers Worldwide Introduction When developing pipework for any project, whether it be modest or a more signifi cant venture,
PIPE/CONDUIT SUPPORTS
PIPE/CONDUIT SUPPORTS Pipe/Conduit Clamps...102-105 Unicushion... 106 Pipe & Tubing (Cush-A-Clamp ) Clamps...107-110 Pipe Hangers... 111 Pipe Rollers...111-112 Pipe Brackets... 113 Reference Tables...114-120
STONE EXTREME /29/2013 PART NUMBER
STONE EXTREME 700 PART NUMBER 005 STONEKOR LLC -800-6-059 customerservice@stonekor.com www.stonekor.com 9 0 6 0 6 5 0 8 6 5 7 STONE EXTREME 700 5 5 7 7 6 0 MACHINE: 005 5 5 8 7 8 9 0 9 STONEKOR LLC -800-6-059
ASSORTMENTS BRONZECLASSWB Above assortment with one #99901 Cabinet, 17 extra dividers, all drawers pre-labeld inside and out.
ASSORTMENTS 34 s BRONZECLASS Body Shop Fastener Starter 71 of the most popular items - Over 1700 pieces. Fasteners Only - No Bins Box Qty. 1 Inside of drawer BRONZECLASSWB Above assortment with one #99901
NT 45/1 Tact. Tact system (Auto Filter Clean System) Power outlet
The is a handy and strong wet/dry vacuum cleaner for commercial applications. It is equipped with the innovative and patented auto filter cleaning system TACT. The NT 45/1 Tact provides full accessory
OptiLine 45 Floor boxes
OptiLine 45 Floor outlet boxes P89490 Type Colour Dimensions A/B/C (mm) Qty per pack Ref. No. Floor outlet box including mounting frames for Altira, trim frame with four quick-fix devices and lid with
Certificate of Conformity
Certificate Holder: ABB Automation Products GmbH Schillerstrasse 72 D-32425 Minden GERMANY Electrical Apparatus: Type of Protection: 2600T Pressure Transmitter Models 265../267../269.. Communication protocol:
1. General Repair Methods
28 Van Trailer Harness System REPAIR HARNESS REPAIR METHODS SECTION OBJECTIVES 1. General Repair Methods 2. Splicing New Wire 3. Stripping & Crimping Basics 4. Sealing New Wire 1. General Repair Methods
gabotherm Skirting Board Systems gabotherm Comfort (Heating Skirting Board) 58 Comfort E (Heating and Electric Skirting Board) 59
Skirting Board Systems Comfort (Heating Skirting Board) 58 Comfort E (Heating and Electric Skirting Board) 59 Pipes / Fastenings 60 Connection Units 61 55 Skirting Board Systems: Comfort Comfort (Heating