STEEL. STEEL BAND AND LATCH COUPLER SET Press on Steel Band and Latch Mainline Sets Galvanized, includes Band and Latch.
|
|
|
- Noah Lyons
- 5 years ago
- Views:
Transcription
1 *Western Style Available See Western Section LATERAL COUPLER SET GALVANIZED Includes Band and Latch Assembly and Round Back Gasket 2" BLCR lbs 3" BLCR " BLCR *1" outlet standard, 3/4" available upon request. STEEL BAND AND LATCH COUPLER SET Press on Steel Band and Latch Mainline Sets Galvanized, includes Band and Latch. Size Wt. Designation With Pan Designation 2" 3.00 lbs BLS200 BLSP200 3" 4.50 BLS300 BLSP300 4" 5.25 BLS400 BLSP400 5" 6.00 BLS500 BLSP500 6" 7.50 BLS600 BLSP600 7" BLS700 8" BLS800 STEEL BAND AND LATCH Coupler Only With Gasket Galvanized STEEL BAND AND LATCH Press In Male Only 2" S lbs 3" S " S " S " S " S " S " BLSM lbs 3" BLSM " BLSM " BLSM " BLSM PG 1
2 STEEL BAND AND LATCH UNIVERSAL VALVE T SET Press on Steel Universal Valve Sets with Stabilizer Foot includes press in T, gasket and Band Latch 3" x 3" BLSUVT lbs 4" x 4" BLSUVT " x 4" BLSUVT " x 4" BLSUVT " x 4" BLSUVT " x 4" BLSUVT *for other sizes contact factory STEEL BAND & LATCH IN-LINE VALVE T SET 3" x 3" BLSUVT-L lbs 4" x 4" BLSUVT-L " x 4" BLSUVT-L " x 4" BLSUVT-L " x 4" BLSUVT-L " x 4" BLSUVT-L Connects to band and latch mainline for side take-off BAND AND LATCH FIELD TEE (Line Tee) 2" BLSFT lbs 3" BLSFT " BLSFT " BLSFT " BLSFT " BLSFT " BLSFT BAND AND LATCH END TEE 90º take-off both directions - end of line 2" BLSET lbs 3" BLSET " BLSET " BLSET " BLSET " BLSET " BLSET PG 2
3 45 degree elbow for band and latch lines 45 DEGREE STEEL BAND AND LATCH ELBOW 2" BLSFE lbs 3" BLSFE " BLSFE " BLSFE " BLSFE " BLSFE " BLSFE degree elbow for band and latch lines 90 DEGREE STEEL BAND AND LATCH ELBOW 2" BLSFE lbs 3" BLSFE " BLSFE " BLSFE " BLSFE " BLSFE " BLSFE BAND AND LATCH REDUCER 2" x 3" BLSR lbs 3" x 4" BLSR " x 5" BLSR " x 6" BLSR " x 6" BLSR " x 7" BLSR Increasers also available - contact factory 6" x 8" BLSR " x 8" BLSR End Plug for band & latch lines. BAND AND LATCH END PLUGS 2" BLSEP lbs 3" BLSEP " BLSEP " BLSEP " BLSEP " BLSEP " BLSEP PG 3
4 RING LOCK MAINLINE COUPLER SET, GALVANIZED Includes press in female, male, gasket and clamp. 3" SRL lbs 4" SRL " SRL " SRL " SRL " SRL " SRL " SRL Hold bands recommended RING LOCK FEMALE COUPLER (GALVANIZED) Press in female, includes gasket 3" SRL-F lbs 4" SRL-F " SRL-F " SRL-F " SRL-F " SRL-F " SRL-F " SRL-F Press in male coupler * Wide Ring Male Available RING LOCK MALE COUPLER (GALVANIZED) 3" SRL-M lbs 4" SRL-M " SRL-M " SRL-M " SRL-M " SRL-M " SRL-M " SRL-M PG 4
5 Press in valve T, male press in end gasket and clamp. STEEL UNIVERSAL VALVE TEE Size Designation W t. 3" x 3" SRLUVT lbs 4" x 4" SRLUVT " x 4" SRLUVT " x 4" SRLUVT " x 4" SRLUVT " x 4" SRLUVT " x 4" SRLUVT " x 4" SRLUVT UNIVERSAL RING LOCK IN LINE VALVE TEE Size Designation W t. 4" x 4" SRLUVT-L lbs 5" x 4" SRLUVT-L " x 4" SRLUVT-L " x 4" SRLUVT-L " x 4" SRLUVT-L " x 4" SRLUVT-L " x 4" SRLUVT-L *Hold band recommended. FITS STEEL ONLY FITS STEEL ONLY HIGH PRESSURE RING LOCK CLAMP Box Qty 3" HPRLC lbs 300 4" HPRLC " HPRLC " HPRLC " HPRLC " HPRLC " HPRLC " HPRLC 1000S " HPRLC " HPRLC 1200S Steel Item # SHB-4 SHB-5 SHB-6 SHB-8 SHB-10 SHB-12 HOLD BANDS Alum. Wt. per 100 Wt. per 100 Item # Alum. Steel Size HB-300 3" HB lbs lbs 4" HB " HB " HB " HB " " PG 5
6 Couples to mainline for side outlet take off. Gaskets included Galvanized, 90 degree take off both directions STEEL RING LOCK FIELD T 3" SRLFT lbs 4" SRLFT " SRLFT " SRLFT " SRLFT " SRLFT " SRLFT " SRLFT RING LOCK END T Size Designation W t. 3" SRLET lbs 4" SRLET " SRLET " SRLET " SRLET " SRLET " SRLET " SRLET STEEL RING LOCK FITTINGS 45 DEGREE ELBOW 3" SRLFE lbs 4" SRLFE " SRLFE " SRLFE " SRLFE " SRLFE " SRLFE " SRLFE STEEL RING LOCK FITTINGS 90 DEGREE ELBOW 3" SRLFE lbs 4" SRLFE " SRLFE " SRLFE " SRLFE " SRLFE " SRLFE " SRLFE PG 6
7 INCREASERS AND OTHER SIZES ALSO AVAILABLE. CONTACT FACTORY. Female end caps available. Example: SRLFEP 600 R-LOCK REDUCER 4" x 3" SRLR lbs 6" x 3" SRLR " x 4" SRLR " x 6" SRLR " x 6" SRLR " x 7" SRLR " x 8" SRLR " x 8" SRLR " x 10" SRLR " x 8" SRLR " x 10" SRLR " x 12" SRLR R-LOCK END PLUG 3" SRLEP lbs 4" SRLEP " SRLEP " SRLEP " SRLEP " SRLEP " SRLEP " SRLEP Steel knob style available for female hose. Reducing hose adaptors availablecall factory. Band & Latch Male* 2" BLSHM lbs 3" BLSHM " BLSHM " BLSHM " BLSHM " BLSHM Female 2" BLSHF lbs 3" BLSHF " BLSHF " BLSHF " BLSHF " BLSHF STEEL HOSE ENDS RAISED BEAD Ringlock Male 3" SRLHM lbs 4" SRLHM " SRLHM " SRLHM " SRLHM " SRLHM " SRLHM Female 3" SRLHF lbs 4" SRLHF " SRLHF " SRLHF " SRLHF " SRLHF " SRLHF PG 7
8 Connects pump to ringlock mainline *Available with flange add "FL" to PN R-LOCK DISCHARGE ADAPTOR 4" x 4" SRLDA lbs 4" x 5" SRLDA " x 6" SRLDA " x 5" SRLDA " x 6" SRLDA " x 8" SRLDA " x 6" SRLDA " x 8" SRLDA " x 10" SRLDA " x 8" SRLDA " x 10" SRLDA BAND AND LATCH DISCHARGE ADAPTOR (Steel Nipple) *Available with flange add "FL" to PN. Other sizes available upon request. 2" x 3" BLSDA lbs 3" x 3" BLSDA " x 4" BLSDA " x 4" BLSDA " x 5" BLSDA " x 6" BLSDA " x 7" BLSDA " x 5" BLSDA " x 6" BLSDA " x 7" BLSDA " x 8" BLSDA " x 6" BLSDA " x 7" BLSDA " x 8" BLSDA SUCTION ADAPTOR STEEL* 3" x 3" SSA lbs 3" x 4" SSA " x 4" SSA " x 5" SSA " x 6" SSA " x 7" SSA Connects pump to suction line *Add 3/4" or 1" fipt *Other sizes available upon request. *Available with flange add "FL" to PN 5" x 5" SSA " x 6" SSA " x 7" SSA " x 8" SSA " x 6" SSA " x 7" SSA " x 8" SSA " x 8" SSA PG 8
9 *Specify gauge after part number EX: SCB ga *Hook Boss couples Available - Call *Specify gauge after part number EX: SCB M ga STEEL STEEL STARTER COUPLERS BLACK GALVANIZED SIZE PART # 14ga 12ga 10ga PART# 14ga 12ga 10ga 2" WSCB 200 WSCG 200 3" WSCB 300 WSCG 300 4" WSCB 400 WSCG 400 5" WSCB 500 WSCG 500 6" WSCB 600 WSCG 600 7" WSCB 700 WSCG 700 8" WSCB 800 WSCG " WSCB 1000 WSCG " WSCB 1200 WSCG 1200 STEEL STARTER COUPLERS--MALE BLACK GALVANIZED SIZE PART# 14ga 12ga 10ga PART# 14ga 12ga 10ga 3" WSCB M 300 WSCG M 300 4" WSCB M 400 WSCG M 400 5" WSCB M 500 WSCG M 500 6" WSCB M 600 WSCG M 600 7" WSCB M 700 WSCG M 700 8" WSCB M 800 WSCG M " WSCB M 1000 WSCG M " WSCB M 1200 WSCG M 1200 STEEL STARTER DEEP AND EXTRA DEEP PUNCH Deep Punch Starter Coupler SIZE WT DEPTH OAL PART # 3" 1.8 LBS 6" 9.25" SCB 300 D 4" 2.6 6" 9.25" SCB 400 D 5" 3.4 6" 9.25" SCB 500 D 6" 3.6 6" 9.25" SCB 600 D 7" 5.6 6" 9.25" SCB 700 D 8" 6.6 6" 9.25" SCB 800 D 10" 8.4 6" 9.25" SCB 1000 D 12" " 9.25" SCB 1200 D Extra Deep Punch Starter Coupler SIZE WT DEPTH OAL PART # 4" 3.0 LBS 7.50" 11.00" SCB 400 ED 5" " 11.00" SCB 500 ED 6" " 12.00" SCB 600 ED 8" " 15.25" SCB 800 ED 10" " 15.25" SCB 1000 ED 12" " 15.25" SCB 1200 ED PG 9
10 STEEL UNIVERSAL VALVE STUB 3" UVS-S lbs 4" UVS-S " UVS-S " UVS-S " UVS-S STEEL LUG-TYPE VALVE STUB 3" UVS-SL lbs 4" UVS-SL " UVS-SL " UVS-SL STEEL VALVE STUB W/FIPT Second number designates thread size. Designation Wt lbs UVS-STF3002 UVS-STF UVS-STF UVS-STF UVS-STF UVS-STF UVS-STF STEEL VALVE STUB W/MIPT Second number designates thread size. Designation Wt. UVS-STM lbs UVS-STM UVS-STM UVS-STM UVS-STM UVS-STM UVS-STM PG 10
11 Idaho Foot Style STEEL CIRCLE LOCK SURGE PLUG Size Wt. Designation 4" 7.2 lbs SRL-SP400 5" 7.8 SRL-SP500 6" 8.6 SRL-SP600 7" 9.0 SRL-SP700 8" 11.7 SRL-SP800 10" 12.7 SRL-SP1000 *85 psi standard PRESS-IN CENTER OUTLET Presses into aluminum tubing sections to provide sprinkler outlet. Designation Wt. PCR300 B 3.50 lbs PCR400 B 4.00 Reinforcing bridge standard Standard length is 7" on 3", 4" & 5". Also available in 10" length. *For long length add "L" to Part #. STEEL REPAIR SLEEVE Designation Wt. SRS lbs SRS SRS SRS SRS SRS SRS STEEL HOSE REPAIR FITTING Features two hose beads welded back to back - galvanized 2" HRC lbs 3" HRC " HRC " HRC lbs 6" HRC " HRC " HRC PG 11
12 SUVEO STEEL UNIVERSAL VALVE OPENERS Steel Elbow Opener Outlet adapts to either hook or ringlock style pipe. 3/4" FIPT outlet available upon request. Available with Ames ABC outlet. Size Wt. Designation 3" x 2" 8.0 lbs SUVEO302 3" x 3" 8.5 SUVEO303 4" x 3" 10.0 SUVEO403 4" x 4" 11.0 SUVEO404 5" x 4" 13.0 SUVEO504 5" x 5" 13.0 SUVEO505 6" x 4" 14.0 SUVEO604 6" x 5" 14.5 SUVEO605 6" x 6" 15.0 SUVEO606 8" x 6" 20.0 SUVEO806 8" x 8" 23.0 SUVEO808 SUVEO-T Steel Tee Opener Outlet adapts to either hook or ringlock style pipe. 3/4" FIPT outlet available upon request. Available with Ames ABC outlet. Size Wt. Designation 3" x 2" x 2" 9.0 lbs SUVEO-T322 3" x 3" x 3" 10.0 SUVEO-T333 4" x 3" x 3" 13.0 SUVEO-T433 4" x 4" x 4" 14.0 SUVEO-T444 5" x 4" x 4" 15.0 SUVEO-T544 5" x 5" x 5" 16.0 SUVEO-T555 6" x 4" x 4" 17.0 SUVEO-T644 6" x 5" x 5" 18.0 SUVEO-T655 6" x 6" x 6" 18.0 SUVEO-T666 8" x 6" x 6" 20.0 SUVEO-T866 8" x 8" x 8" 23.0 SUVEO-T888 Steel Gun Stand Opener Size Wt. Designation 3" x 3" FIPT 8.5 lbs SUVEO-GS303 4" x 3" FIPT 10.0 SUVEO-GS403 SUVEO-GS PG 12
13 Band and Latch BL-Z-4 4" BL-Z-5 5" BL-Z-6 6" BL-Z-7 7" BL-Z-8 8" Steel Z Drop Galvanized Ringlock Z drops available in sizes other than shown above. Call factory. SRL-Z-4 4" SRL-Z-5 5" SRL-Z-6 6" SRL-Z-7 7" SRL-Z-8 8" SRL-Z-10 10" SRL-Z-12 12" FULL BAND AND LATCH (including Nut, Bolt and Ferrule) Uses Pierce type hook. Size Wt. Designation 2" 1.0 lbs PBL 200 3" 1.0 PBL 300 4" 1.5 PBL 400 5" 2.0 PBL 500 6" 2.5 PBL 600 7" 3.0 PBL 700 8" 3.0 PBL " 3.5 PBL 1000 (B) OUTSIDE LATCH Pierce type hook (A) FULL BAND ONLY Size Wt. Designation 2" 0.5 lbs B 200 3" 0.5 B 300 4" 0.8 B 400 5" 1.5 B 500 6" 1.5 B 600 7" 2.0 B 700 8" 2.5 B " 3.0 B 1000 (C) LATCH FERRULE Ferrule A-5/16" PG 13
*Western Style Available See Western Section LATERAL COUPLER SET GALVANIZED Includes Band and Latch Assembly and Round Back Gasket
*Western Style Available See Western Section LATERAL COUPLER SET GALVANIZED Includes Band and Latch Assembly and Round Back Gasket 2" BLCR200 3.00 lbs $ 25.55 3" BLCR300 4.50 21.85 4" BLCR400 6.00 36.27
WESTERN STYLE STEEL. LATERAL COUPLER SET GALVANIZED Includes Band and Latch Assembly and Square Back Gasket
LATERAL COUPLER SET GALVANIZED Includes Band and Latch Assembly and Square Back Gasket 2" WBLCR200 3.00 lbs $ 29.48 3" WBLCR300 4.50 25.22 4" WBLCR400 6.00 41.85 *1" Outlet Standard, 3 4 " Available upon
PARTS LIST FOR MODEL 7000 SERIES - 17/46
ITEM PARTS LIST FOR MODEL 7000 SERIES - 17/46 1 Rotor 3 Housing 1 4 End Plate 6 Drive End Cover 1 7 Free End Cover 1 8 Timing Gear Set 1 9 Bearing, Drive End 10 Bearing, Free End 1 Lip Seal, Viton 4 13
Diesel Hammer Model D19-42 Part #
Diesel Hammer Model D19-42 Part # 120491 2 Diesel Pile Hammer Part # 120941 Pos Order No. Pg Description Qty 120941 Diesel Pile Hammer D19-42 (Bauer MNR:426514) 1 160198 4 Cylinder Lower Part cmpl 1 2
8" PIVOT. Model 8000 Pivot - Prior to Feb 2002
" PIVOT Model 000 Pivot - Prior to Feb 00 " Pivot Table of Contents Description Rev. # Pg. # Overall Assembled View... 0-0... Legs & Braces... 0-0... Ladder... 0-0... Collector Ring "J" Tube... 0-0...
Diesel Pile Hammer D30-32 Part # 66508
Diesel Pile Hammer D30-32 Part # 66508 2 Diesel Pile Hammer D30-32 Part # 66508 Pos Order No Pg Description Qty 66508 Diesel Pile Hammer D30-32 cmpl 1 1 108742 4 Cylinder Lower Part cmpl 1 2 60151 Inner
SOCKET & NIPPLE. Quality products for a quality environment BSP THREADED FITTINGS - PP. Code K12. Socket - equal Injection moulded.
BSP THREADED FITTINGS - PP SOCKET & NIPPLE Code K12 Socket - equal 1/2 to 3 Material: PP black Socket - reduced 1/2 up to 4 in various increments Material: PP black Nipple - equal 1/2 to 4 Material: PP
MODEL D DIESEL PILE HAMMER
AMERICAN PILEDRIVING EQUIPMENT, INC. MODEL D125-42 DIESEL PILE HAMMER SPARE PARTS BOOK Corporate Office 7032 S. 196th Street Kent, WA, USA 98032 Tel: 1-800-248-8498 Tel: 1-253-872-0141 Fax: 1-253-872-8710
New Product Release: October 2014 Boone Racks
New Product Release: October 2014 Boone Racks Double Fido Fountain Mounting: Surface NOTE: THESE ROUGH-IN DIMENSIONS MAY VARY ½: (13 mm) PLUS OR MINUS NOTE: All dimensions subject to manufacturing variance
FITTINGS & GAUGES 20,000 PSI
PRESSURE GAUGE Features 4" high visibility face with laminated safety glass dial cover Accurate within +/- 0.5% of full scale range Stainless steel case and internals Heavy-duty movement Glycerine-filled
tubing & fittings section guide
tubing & fittings Increasing demands for purity and reliability make the correct selection of materials essential. Used in a wide range of applications and industries such as electronics, chemical processing
Main Components. Pipe and Bolt Threading Machine 300/300A. Early Style. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.
Pipe and Bolt Threading Machine 00/00A Main Components Early Style 0 0 * 0 0 0 For Information on Cutters, Die Heads and Reamers SEE INDEX Ref. 0 0 Catalog 0 00 00 0 0 0 00 0 0 0 0 0 0 0 00 0 00 00 00
Brass Compression Fittings
15 Brass Compression Fittings Product Applications For use with potable water, instrumentation, hydraulic and pneumatic systems. Designed to be used with aluminum, copper and plastic tubing. Not recommended
HYDRO SHUG GRIP COUPLER SETS HYDRO HARDMENDER SETS
HYDRO SHUG GRIP COUPLER SETS Part Number HCSP4 HCSP4.5 HCSP5 HCSP55 HCS6S HCS6 HCS7 HCS8 HCS10 HCS12 Description 4" Complete Coupler Set 4.5" Complete Coupler Set 5" Complete Coupler Set 5.5" Complete
POTATO TECHNOLOGY ROOTCROP TECHNOLOGY VEGETABLE TECHNOLOGY IRRIGATION TECHNOLOGY PARTS & SUPPORT 2016 EDITION
POTATO TECHNOLOGY ROOTCROP TECHNOLOGY VEGETABLE TECHNOLOGY IRRIGATION TECHNOLOGY PARTS & SUPPORT 2016 EDITION GRIMME IRRIGATION CONTENTS Hook & Latch Systems... 04 Aluminium Fittings... 04 Galvanised
GP ONE SPLIT DECK 9/4/2012 COPYRIGHT 6/10/10 ALL RIGHTS RESERVED
GP ONE SPLIT DECK PAGE G & P ONE GRINER SPLIT DECK SUB ASSEMBLY PARTS BREAK DOWN 4 2 24 20 2 6 0 36 24 7 27 2 2 25 3 32 2 24 28 24 8 7 24 5 2 25 2 20 2 4 3 2 34 5 26 22 2 27 35 22 3 30 6 9 29 8 29 2 9
EXPLODED VIEW OF KINNEY MODELS KC-5 & KC-8
EXPLODED VIEW OF KINNEY MODELS KC-5 & KC-8 KC-5 KC-8 Pump RPM 638 1022 Motor HP (kw) 0.33 (0.25) 0.50 (0.37) Oil Capacity, qts. (liters) 0.8 (0.76) Forced Drain w/ open suction, qts. (liters) 0.85 (0.80)
SS Band for increased durability (except 1/2 inch) 4000 PSI
COUPLERS Legacy Quick Couplers Legacy Brass Couplers give Premium Performance with Economy Price. Legacy Quick Connect Couplings are machined from top grade materials to the same exacting specifications
BX62R Chipper Parts Manual. Prior to S/N 162R00282
Prior to S/N 162R00282 Foreword EMB Mfg. has prepared this parts manual to assist customers in ordering quality OEM replacement parts. Proper and regular service and replacing old, worn or broken parts
Model No: TC10. Parts Information: Tyre Changer - Automatic
Page 1 of 11 1 TC10.01 BODY 2 TC10.02 COLUMN 3 TC10.03 HORIZONTAL ARM ASS'Y 4 TC10.04 WASHER 5 TC10.05 RUBBER FOOT 6 TC10.06 COVER 7 TC10.07 SCREW M14x42 8 TC10.08 PRESS COVER 9 TC10.09 STOP-UP 10 TC10.10
Gujarat Green Revolution Company Limited P. O. Fertilizernagar , Dist: Vadodara.
1 Non Return Valve, Low Friction a 1.5 " GM 778 No 661.04 b 2 " GM 778 No 1000.59 c 2.5 " GM 778 No 1340.13 d 3 " GM 778 No 1679.68 e 4 " CI 14846 No 2358.75 f 5 " CI 14846 No 3037.83 g 6 " CI 14846 No
M-5 PRO CORE BORE PARTS LIST DRILLING MACHINE. (March 2017) Part #
M- PRO CORE BORE DRILLING MACHINE PARTS LIST (March 07) Part #809 Table of Contents Description Page No. Carriage Assembly....... - Combo Base Assembly....... - 7 Anchor Base Assembly........8 Anchor
PRESSURE WASHERS Davis Road, Suite J Elgin, IL (800) Professional 2018 Price List
PRESSURE WASHERS 1150 Davis Road, Suite J Elgin, IL 60123 (800) 788-8867 info@lorchem.com www.lorchem.com Professional 2018 Price List 2018 For more information, contact Lorchem Technologies at: (800)
Lockformer / 16 Gauge Speednotch
Lockformer / 16 Gauge Speednotch INSTALLATION PRELIMINARY: After uncrating, locate unit, with or without base skid, to area of operation. Unbind foot switch cord and cylinder hoses and remove gauge pin
Universal Pipe Cutter (UPC) Replacement Parts Booklet
Universal Pipe Cutter Universal Pipe Cutter (UPC) Booklet Table of Contents Drawing Number U U U U U U U U8 U9 U0 U Description UPC Front View UPC Pneumatic Rear View UPC Hydraulic Rear View UPC Mainframe
APPLICATION CHART. Tractor Model * Wood Splitter HOME TRACTORS ATTACHMENTS INDEX
R Ingersoll HOME WOOD SPLITTER J31, K31 AHSHD, HSHD, J32, K32, J32 J34, K34, L34 AHSWD, HSWD, K36 Parts Catalog 8-2052 NOTE: This Catalog replaces Catalog 8-2051 TRACTORS ATTACHMENTS INDEX PAINT GENERAL
Piper GI Conduits. Heavy Gauge Welded GI Conduit, threaded
Piper GI Conduits Piper GI Conduits from Eurotube is a range of Conduits manufactured from high grade galvanized steel. The products are available in class 4 hot dipped galvanized, black enameled and class
Gujarat Green Revolution Company Limited P. O. Fertilizernagar , Dist: Vadodara. Price List w.e.f. 06/02/2015
1 Non Return Valve, Low Friction a 1.5 " GM 778 No 731.60 b 2 " GM 778 No 1107.39 c 2.5 " GM 778 No 1483.17 d 3 " GM 778 No 1858.95 e 4 " CI 14846 No 2610.50 f 5 " CI 14846 No 3362.06 g 6 " CI 14846 No
PARTS LIST MS 2892-D
PARTS LIST MS 89-D 8--00 8-0-000 KNIFE BRACE (TOP) 8--00 RIGHT KNIVE (UHMW) 8--00 LEFT KNIFE (UHMW) 8-0-00 KNIFE BRACE (UNDER) NC0-8-0 0 FLAT HEAD SOCKET CAP SCREW STAINLESS /8- X " LG NC0-9-00 0 LOCK
Gujarat Green Revolution Company Limited P. O. Fertilizernagar , Dist: Vadodara.
1 Non Return Valve, Low Friction a 1.5 " GM 778 No 671.11 b 2 " GM 778 No 1015.83 c 2.5 " GM 778 No 1360.54 d 3 " GM 778 No 1705.26 e 4 " CI 14846 No 2394.67 f 5 " CI 14846 No 3084.09 g 6 " CI 14846 No
HYDRAULIC CONTROL DETAILS PARTS LIST
Always give model number, serial number and part number when ordering repair parts. HYDRAULIC CONTROL DETAILS PARTS LIST REF NO. PART NUMBER DESCRIPTION 1 101939 Hydraulic Tank 2 101940 Hydraulic Tank
FASTENERS FIRST LOOSEN WITHOUT TURNING!
FASTENERS FIRST LOOSEN WITHOUT TURNING! "Settling down" is the term ESNA laboratory people use to describe a relaxation phenomenon that occurs at room temperature under static conditions. During the first
535A. Main Components. Pipe and Bolt Threading Machine. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.
Pipe and Bolt Threading Machine A Main Components 0 Screw, Button Head /" - 0 x /" () Washer, Flat /" ()" Top Cover 0 Base Bottom Cover Screw, Pan Head # - x " () Carriage Assembly 0 Front Support Bar
Plumbing Part II - Hand Pump
Plumbing Part II - Hand Pump Nelson Riedel Nelson@NelsonsLocomotive.com Initial: 7/17/03 Last Revised: 06/06/2004 The hand pump located in the tender water tank is a backup pump should the axel pump fail
Operating, Servicing, and Safety Manual Model # 100 Standard Hydraulic Tubing Notcher Model #100-U Heavy Duty Hydraulic Tubing Notcher
Operating, Servicing, and Safety Manual Model # 100 Standard Hydraulic Tubing Notcher Model #100-U Heavy Duty Hydraulic Tubing Notcher Model # 100 Standard Model #100-U Heavy Duty CAUTION: Read and Understand
PIPING NOMENCLATURE. Header Branch connection Valve Flange Expansion joint Expansion loop Pipe support Reducer Elbow
PIPING COMPONENTS Piping components are mechanical elements suitable for joining or assembly into pressure-tight fluid containing piping systems. Components include pipe, tubing, fittings, flanges, gaskets,
18000 HDL FOUR POST LIFT LB CAPACITY INSTALLATION AND OWNER'S MANUAL
18000 HDL FOUR POST LIFT 18000 LB CAPACITY INSTALLATION AND OWNER'S MANUAL WARNING! Do not raise a vehicle unless the front stops are in place, the parking brake is set, and the wheels are chocked. Stay
535-Manual. Main Components. Pipe and Bolt Threading Machine. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.
Pipe and Bolt Threading Machine -Manual Main Components 0 Screw, Button Head /" - 0 x /" () Washer, Flat /" ()" Top Cover 0 0 Cutter Assembly Stop Pin 0 Pin Reamer Assembly Carriage Assembly 0 Stop Screw
240 Owner s Manual & Parts Book
0 Owner s Manual & Parts Book Purchase Date Serial Number Model Number Tractor Model Dealer PN: 3-188 Serial #:083-88, 0, 07-... Date --0 Contents Description Page To The Owner, Maintenance Safety Precautions
Fitting C.O. Adapter
ABS-DWV Fittings ABS/DWV Service Weight Pipe Schedule 30 Single step solvent cementing procedures no primer required. Excellent solvent cementing characteristics. Black. 84/Ctn. x h Hub Sanitary 0321612
W1265V, W1265B, W1265CV PARTS DIAGRAM
Trail Warrior Quick Split -Ton Log Splitters Parts Breakdown W65V, W65B, W65CV PARTS DIAGRAM 37 3 30 37 5 5b 37 34 4 36 4 44 3 6 3 0 4 3 6 35 38 5 9 46 3 40 38 35 40 43 43 4 40 39 7 6 8 9 7 6 35 49 63
Main Drive Components
Pipe and Bolt Threading Machine Main Drive Components 0 0 Rear Centering Head Centering Jaw Set Spiral Pins () 00 Centering Scroll Retaining Ring 0 Rear Bearing 0 Oil Ball Valve () # - x / Screw Motor
Part No. Original Part No. Original MPT No. FPT No. Description. Part No. Original Part No. Original MPT No. FPT No. Description
COUPLERS Legacy Quick Couplers Legacy Brass Couplers give Premium Performance with Economy Price. Legacy Quick Connect Couplings are machined from top grade materials to the same exacting specifications
D300K 3+3 SE KUBOTA PARTS LIST FOR RETURN TO MAIN INDEX
Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies P-737 P-737 RETURN TO MAIN INDEX PARTS LIST FOR P-737-A P-737-A ILLUSTRATION
PARTS MANUAL Rev A
PARTS MANUAL 4000394 Table of Contents Part Index for Trailer --------------------------------------------- 2 Trailer Figure ----------------------------------------------------- 6 Trailer Figure 2 -----------------------------------------------------
STONE EXTREME /29/2013 PART NUMBER
STONE EXTREME 700 PART NUMBER 005 STONEKOR LLC -800-6-059 customerservice@stonekor.com www.stonekor.com 9 0 6 0 6 5 0 8 6 5 7 STONE EXTREME 700 5 5 7 7 6 0 MACHINE: 005 5 5 8 7 8 9 0 9 STONEKOR LLC -800-6-059
Assmann Corporation of America TANK INSTALLATION AND USE GUIDELINES FOR BULK STORAGE TANKS
Assmann Corporation of America TANK INSTALLATION AND USE GUIDELINES FOR BULK STORAGE TANKS General Information Assmann polyethylene storage tanks are manufactured to give you the toughest, most reliable
Beaded Hose Barbs 4601 (430292) 4603 (430392) 2 2 Pg. 83. Pg. 86 Beaded Hose Barb x MB 1-HS 2-MB. Pg. 85 Beaded Hose Barb x MB 1-HS 2-MB
Pressure Connections takes great pride in each fitting we sell. Standard material for our is steel with a RoHs compliant 96-hour salt spray finish that exceeds the SAE 72-hour salt spray requirement. For
International Tube & Conduit Company Ltd. BRITISH STANDARD STEEL CONDUITS & FITTINGS
International Tube & Conduit Company Ltd. BRITISH STANDARD STEEL CONDUITS & FITTINGS 1 ABOUT THE COMPANY VISION STATEMENT We strive to exceed our customers expectations through leading edge technologies
Operating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4
Operating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-320038 Ph.: 800-274-6848 Revision H 01/2016
MODELS 920LS-922LS SERIES
THE MODELS 90LS-9LS SERIES HYDRAULIC LOG SPLITTER EXPLODED VIEWS WITH PART NUMBERS CONGRATULATIONS! You are now the proud owner of a BARRETO log splitter. The following pages have detailed views of your
This specification describes the minimum requirements for service water piping systems (ie: cooling water, process water, etc.), located on surface.
SPEC-3500 1/9 1.0 PURPOSE This specification describes the minimum requirements for service water piping systems (ie: cooling water, process water, etc.), located on surface. Note: This specification does
COUPLERS, FITTINGS & FILTERS
Quick Couplers Precision brass design Unrestricted free flow 4000 PSI Brass Couplers, designed for 4000 PSI and extended durability. Affordable and rugged all in one. 826169 1/4" FNPT 826176 3/8" FNPT
1822-I. Spindle Assembly. Pipe and Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* * *
-I Pipe and Bolt Threading Machine Spindle Assembly * * * 0 * * * 0 * * 0* * * Rear Cover * Screw () * Washer () Top Cover w/clips (Includes,, ) * J Clip () Front Cover * Screw () Pivot Rod Support ()
1. Fasten press to bench or work surface using the mounting holes provided (Item 3).
INSTRUCTIONS AND PARTS LIST FOR Models 1-202, 1-204, 1-210, and 1-220 Air Arbor Presses WARNING LABELS To the left is the safety Alert symbol. When you see these safety alert symbols on your press, be
SERVICE INSTRUCTIONS Model 9670 Lubricant Pump
TM TM SERVICE INSTRUCTIONS Model 9670 Lubricant Pump 9670 DESCRIPTION Model 9670 Lubricant Pump is designed to pump light to heavy oils directly from the original container. This design features a 10:1
CLASSIC 300D Kubota PARTS LIST FOR RETURN TO MAIN INDEX
Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies P-498 P-498 RETURN TO MAIN INDEX PARTS LIST FOR CLASSIC 300D Kubota P-498-A P-498-A
8' HYDRAULIC HOSE & ADAPTER DISPLAY Page 1 of 6 rev032318
800.459.8423 Page 1 of 6 rev032318 4ft Section 4ft Section A5 A40 A50 A60 A70 A83 A40 A50 E30 A19 A40 A15 A15 A40 A50 A85 B90 B110 B120 C130 C140 C150 C160 E210 B60 D90 D100 D110 D130 A50 A60 A70 B80 B88
BP Brine Pro Brine Maker. Parts List. This Parts List is for BP-2000 brine makers with serial numbers beginning with and higher.
November, 0 Lit. No., Rev. 0 BP-000 Brine Pro Brine Maker Parts List This Parts List is for BP-000 brine makers with serial numbers beginning with 00 and higher. A DIVISION OF DOUGLAS DYNAMICS, LLC FRAME
Fitting C.O. Adapter
ABS-DWV Fittings ABS/DWV Service Weight Pipe Schedule 30 Single step solvent cementing procedures no primer required. Excellent solvent cementing characteristics. Black. 84/Ctn. h x h x h Hub Sanitary
CATALOG OF REPLACEMENT PARTS GAS CONVECTION STEAMERS MODELS
CATALOG OF REPLACEMENT PARTS GAS CONVECTION STEAMERS MODELS VSX5G VSX5GC VSX7GC VSX10GC ML-114946 ML-114947 ML-114948 ML-114949 For additional information on Vulcan-Hart or to locate an authorized parts
WX630 Trailer Log Splitter Parts Manual. Starting with S/N & After
WX630 Trailer Log Splitter Parts Manual Starting with S/N 3000 & After Foreword EMB Mfg. has prepared this parts manual to assist customers in ordering quality OEM replacement parts. Proper and regular
HYDRAULIC STEEL BRAKE LINES
36 B9 MISCELANEOUS HYDRAULIC STEEL BRAKE LINES DOMESTIC CAR AND TRUCK STANDARD INVERTED FLARE BOTH ENDS HYDRAULI STEEL BRAKE LINE B9-HL3008 3/16" 8" 10 B9-HL3012 3/16" 12" 10 B9-HL3020 3/16" 20" 10 B9-HL3030
NELSON STUD WELDING ACCESSORY SPECIFICATION: Stud Weld Gun Imperial Dimension Chucks
Type 1 4 #2 Morse Taper Mounting NELSON STUD WELDING ACCESSORY SPECIFICATION: Stud Weld Gun s Below is a list of standard imperial chucks for use in welding Nelson studs. The chucks are listed with both
ASSORTMENTS BRONZECLASSWB Above assortment with one #99901 Cabinet, 17 extra dividers, all drawers pre-labeld inside and out.
ASSORTMENTS 34 s BRONZECLASS Body Shop Fastener Starter 71 of the most popular items - Over 1700 pieces. Fasteners Only - No Bins Box Qty. 1 Inside of drawer BRONZECLASSWB Above assortment with one #99901
Air Hose Products.
Air Hose Products 1.1 Bulk Red Air Hose 1.2 Jackhammer Hose Assemblies 1.3 Air Tool Hose Assemblies 1.4 Hot Air Blower Hose 1.5 Yellow Wire Braid Air Hose Assemblies and Fittings 1.6 Air Hose Fittings
IF YOU DON T SEE IT HERE
www.smithfast.com Drills & Taps & Bits Screws Cotter Drilling Bolts / Hex Capscrews Lag Carraige Hitch Grade 8 Machine Grade Elevator 5 Sheet Spring Metal Roll Grade Eye 2 Square Taper Head set A325 Hex
MetFit MECHANICAL FITTINGS
MECHANICAL FITTINGS ENGINEERED FOR DEPENDABILITY HOW THEY WORK & WHY THEY ARE DIFFERENT CONSISTENT, REPEATABLE INSTALLATION Simple one-step squeezing motion COMPENSATES FOR COLD FLOW Ring maintains continuous
DIAMOND MODEL CC1300-XL P R O D U C T S CONCRETE SAW PARTS LIST. March Part#:
DIAMOND P R O D U C T S CONCRETE SAW PARTS LIST MODEL CC1300-XL March 2007 Part#: 1800666 Intentionally Blank Table of Contents Description Page No. Frame Group....4-7 Engine Group 9 Horsepower Gas. 8
CONCRETE SAW PARTS LIST
CONCRETE SAW PARTS LIST MODEL CC00XL ELECTRIC & HYDRAULIC UNITS August, 0 Part # 0 Table of Contents Common Parts.. Front Axle Assembly... Rear Axle Assembly... Transmission Assembly... Blade Shaft Assembly
TRAILER MOUNTED PUMP MODEL B20 ILLUSTRATED PART MANUAL
TRAILER MOUNTED PUMP MODEL ILLUSTRATED PART MANUAL GROUP 00 FIGURE 00 PAGE 01 MODEL HP SHOWN: STANDARD HOPPER WITH DUAL SHIFT SWING CYLINDERS REED TRAILER MOUNTED CONCRETE PUMP MODEL ILLUSTRATED MANUAL
This specification describes the minimum requirements for piping systems for the following service:
201/01/13 1/ 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Service Air Design Conditions Operating Conditions Blast Air (see Note 1)
MEFA mounting accessories
MEFA mounting accessories Mounting accessories Base plates Page 5/2 Double holder Page 5/4 Height-adjustable suspensions Page 5/5 Pendular bolt joints Page 5/6 Trapeze hanger Page 5/7 Threaded hooks, distance
Hose Accessories. "Air King" 4 - Lug Quick-Acting Couplings. Hose End. Female N.P.T. End
"Air King" 4 - Lug Quick-Acting 1¼" 1½" AM16 AM AM6 AB16~ AB~ AB6 End Rubber Washers for 4-Lug AWR14 Fits all sizes 1¼" 1½" AM18 AM3 AM8 AB18~ AB3 AB8 Rated to 1 PSI Female N.P.T. End "Boss" clamps recommended
00278 R1 AXLE, FOR 1-1/8" FREE WHEEL HUBS
00 ACTUATOR VALVE, O-RING PORTS 00 C-CLIP, /" 00 SPRING, VALVE SPOOL RETURN 00 COLLAR, / ID 00 WASHER, / USS, ZINC 00 HH CAP SCREW, /- NC X -/ G ZINC 0 FITTING, 0-- 00 O-RING, - FITTING 000-BO RELIEF VALVE,
Printed from MediaCat
Illustration A Crankcase, Crankshaft Illustration A Crankcase, Crankshaft Ref.Nr. Item code Quantity Description 1 1111 020 2116 1 Crankcase 2-7 2 9371 470 3120 2 Cylindrical pin 6x20 3 9022 341 1010 10
Is Your Product Registered? Contact your Dealer to verify. Warranties are based on Registrations and reduced to 1 year without Registration.
Is Your Product Registered? Contact your Dealer to verify. Warranties are based on Registrations and reduced to 1 year without Registration. PARTS LIST B30L TURBO CONTENTS 1. MAIN BODY...1 ~ 2 2. GEARCASE...3
ROCK DRILLS Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A.
S Website: www.apt-tools.com e-mail: info@apt-tools.com TDS-1027 Rev A S TOOL MAINTENANCE & REPAIR INFORMATION FIELD OPERATION: Before use: 1. Fill the reservoir with air tool oil or 10W equivalent for
GRACO AIRPRO AIR SPRAY GUN
GRACO AIRPRO AIR SPRAY GUN PART NUMBERS AND SCHEMATICS GUIDE Company Profile Since 1944, Marco has developed a strong tradition of providing innovative and reliable products and services to the surface
FLARE COMPRESSION CPVC IRON PIPE HOSE BARB GARDEN HOSE DRAIN/SHUT-OFF COCKS NEEDLE & HUMIDIFIER VALVES
Brass Fittings Innovative solutions delivered Better engineering, better selection, better results FLARE COMPRESSION CPVC IRON PIPE HOSE BARB GARDEN HOSE DRAIN/SHUT-OFF COCKS NEEDLE & HUMIDIFIER VALVES
LABOR/REPAIR CHARGES & POLY NIPPLES
Page 164 LABOR/REPAIR CHARGES & POLY NIPPLES Welding (per inch) (Steel or Aluminum) Weld/Inch 1.10/inch Weld Around (Steel or Aluminum) WA2 WA3 WA4 WA5 WA6 WA8 WA10 WA12 2" 3" 4" 5" 6" 8" 10" 12" $ 11.00
content Introduction Some good reasons to use SMARTr products Reducers, Plugs Conduit Reducer Stopping Plug
CONTENT 1 2 Introduction Some good reasons to use SMARTr products G.I. CONDUITS SMARTr BS4568 : PT1 : 1970 Class 4, IEC 61386-21 : 2004 IEC60614-2 - 1 : 1993, BS EN 50086-2 -1 : 1996 SMARTr BS4568 : PT1
FLARE COMPRESSION CPVC IRON PIPE HOSE BARB GARDEN HOSE DRAIN/SHUT-OFF COCKS NEEDLE & HUMIDIFIER VALVES
Brass Fittings Innovative solutions delivered Better engineering, better selection, better results FLARE COMPRESSION CPVC IRON PIPE HOSE BARB GARDEN HOSE DRAIN/SHUT-OFF COCKS NEEDLE & HUMIDIFIER VALVES
M-1 CORE RIG PARTS LIST. July 6, Part #
M- CORE RIG PARTS LIST July, 0 Part # 800 Table of Contents Pictorial Page Index Angle Complete Combination Stand without Motor... Pictorial Page Index Standard Complete Anchor Stand without Motor...
00238 R4 BODY, BOLT ON TORQUE TUBE PRODUCT LINE: 916/18 DATE: 12/4/06
0 0 SH CAP SCREW, /-0 NC X / G PLAIN 00 NUT, NYLOCK, /-0 NC ZINC 00 HH CAP SCREW, /- NC X G ZINC 0 O-RING, -N0, -/ OD X / SECTION 00 WHEEL DRIVE MOTOR WITH KEY 0 00 GEAR, WHEEL DRIVE MOTOR 0 WASHER, /
JARVIS. Model25CL-4,5,6 Hock Cutter and Loin Dropper. 25CL--5 Front Legs and Horns. 25CL--4 Hind Legs and Horns. 25CL--6 Loins
Model25CL-4,5,6 Hock Cutter and Loin Dropper 25CL--4 Hind Legs and Horns 25CL--5 Front Legs and Horns 25CL--6 Loins EQUIPMENT SELECTION... Ordering No. TABLE OF CONTENTS... Page 25CL--4... 4025007 25CL--5...
FRAME. Pull Type Rigid Frame, Lift Rotate INNER HITCH
Pull Type Rigid Frame, Lift Rotate INNER HITCH The hitch length can be adjusted in 15" increments to accommodate the tractor tire options (single or dual tires) being used and attachments installed on
DIAMOND CONCRETE SAW PARTS LIST MODEL CC1113-XL P R O D U C T S. June Part #
DIAMOND P R O D U C T S CONCRETE SAW PARTS LIST MODEL CC1113-XL June 013 Part #10 TABLE OF CONTENTS Description Page No. Saw Assembly (Normal Cut).... - Saw Assembly (Up-Cut)...... - Gas Engine Assembly......
Bolts Carriage Elevator Eye Hex Shoulder Specials Square Head Step. Drills, Taps, & Bits. Hex Capscrews Grade 8 Grade 5 Grade 2 A325 A490 Specials
AU-VE-CO Bolts Carriage Elevator Eye Hex Shoulder Specials Square Head Step Concrete Anchoring Adhesives Anchor Bolts Drop Ins Wedge Pins Cotter Dowel Hitch Spring Roll Taper Pipe Fittings Power Coil EZ
B50 PARTS TRAILER MOUNTED PUMP MODEL B50 ILLUSTRATED PART MANUAL
TRAILER MOUNTED PUMP MODEL ILLUSTRATED PART MANUAL GROUP 00 FIGURE 00 PAGE 01 REED TRAILER MOUNTED CONCRETE PUMP 05 MODEL ILLUSTRATED MANUAL CONTAINS THE FOLLOWING GROUPS AND FIGURES: GROUP 00 HOW TO USE
WRANGLER 2730 DB & 3330 DB
PARTS LIST WRANGLER 2730 DB & 3330 DB WITH SIDEKICK CHEMICAL DISPENSER WITHOUT SIDEKICK CHEMICAL DISPENSER RECOVERY TANK ASSEMBLY ITEM PART NO. DESCRIPTION QTY 101 3392051 TOP PLATE 1 102 9120500 10-24
Castle Frame Assembly Table AT-8. Diagnostics Manual. Castle, Inc. Petaluma, CA
Castle Frame Assembly Table AT-8 Diagnostics Manual Castle, Inc. Petaluma, CA 800-282-8338 Solutions Index Adjusting the Tabletop.. 8.01 Adjusting the Fence... 8.02 Aligning the Arm... 8.10 Adjusting Bracket..
767, 777, DC-10, L-1011, MD-11 Tow Bar Equipment Manual
514 MECKLEM LANE, ELLWOOD CITY, PENNSYLVANIA 16117 www.hallindustries.com E-mail: service@hallindustries.com 767, 777, DC-10, L-1011, MD-11 Tow Bar Equipment Manual Use This Manual for 1. Operating Procedures
SECTION EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING
SECTION 230516 - EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
Magnetic level indicators made in Australia under licence to Weka AG of Switzerland.
ABN 24 080 175 293 PO Box 212 Caringbah NSW 1495 Sydney Australia ph: +61 (0)2 9542 8977 fx: +61 (0)2 9542 7978 www.controlcomponents.com.au Magnetic level indicators made in Australia under licence to
STEEL BLASTER CABINET FLOOR MODEL
STEEL BLASTER CABINET FLOOR MODEL 39170 ASSEMBLY & OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web Site at www.harborfreight.com Copyright 1998 by Harbor Freight Tools.
Products catalogue (I-P Edition)
Products catalogue (I-P Edition) Products catalogue (I-P Edition) FROM QUALITY OUR NATURAL DEVELOPMENT Active in the industry of Refrigeration and Air Conditioning for fifty-five years, Castel is well-established
Wire Feeder Welders (125, 140, 180 Models)
Index of Sub Assemblies Index of Sub Assemblies Index of Sub Assemblies Index of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration
READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G0503 ***IMPORTANT UPDATE*** For Machines Mfd. Since 11/06 and Owner's Manual Revised 05/11 For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
Note: Do not bury sulphur dioxide lines Use stainless steel pipe and fittings only where specified on project drawings.
1/7 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Liquid and High Pressure Gaseous Dry Sulphur Dioxide (Less than 100 ppm of water)