KEEP BOX AND PACKING MATERIAL UNTIL TABLE HAS BEEN COMPLETELY ASSEMBLED. ALL DAMAGE MUST BE REPORTED TO DMI WITHIN TEN DAYS OF RECEIPT.

Transcription

1 Congratulations on the purchase of your new DMI Sports soccer table. Our products are designed and manufactured to give you years of game playing enjoyment. KEEP BOX AND PACKING MATERIAL UNTIL TABLE HAS BEEN COMPLETELY ASSEMBLED. ALL DAMAGE MUST BE REPORTED TO DMI WITHIN TEN DAYS OF RECEIPT. If you have any problems with your new product, PLEASE DO NOT RETURN IT TO THE STORE. Please contact us: FAX: Please have your model number when inquiring about parts. Or write to: DMI Sports Customer Service 300 Virgina Drive, Suite 0 Fort Washington PA, 903 Please visit our web site at: When contacting DMI Sports, please provide your model number and item number (if applicable) if requesting a replacement part. Item numbers can be found inside this owners manual. HT600 Your Model Number Your model number is also located on the original carton. These instructions are also available online at: DMI Sports -- For Customer Service Call

2 IMPORTANT! Please Keep Your Instructions! (You will need your Model number should you need to contact us.) Before attempting assembly, please read through this instruction book to familiarize yourself with all the parts and assembly steps. We recommend that two adults assemble this table. Please refer to the Parts Identifier on the following page and be sure that all parts have been included. Although extremely rare, occasionally a part may be missing. If you are missing a part, or if you have any questions, please call our customer service department at Mon-Fri between the hours of 9:00am and 5:00pm E.S.T; or you can reach us at: Do not return the game to the store. Please contact us first at: or on our website at: TWO ADULTS ARE REQUIRED TO ASSEMBLE THIS HOCKEY TABLE DMI Sports -- For Customer Service Call

3 P P PARTS IDENTIFIER P3 P P5 Piece P7 P8 P9 H H H3 H H5 Side Panel With On/Off Slot Piece H7 H0 H 3/6 Console Bolt F*-3/ Leg Screw 56 Pieces H H3 H H5 5/6 *-3/ Leg Bolt H6 P0 P P P3 P Wrench Piece P5 P7 P8 P9 Tools required for assembly: Allen wrench - included Switch Box And Control Plug Piece U Bracket Piece Screw driver, electric screw driver preferred - not included Level recommended - not included DMI Sports -3- For Customer Service Call

4 STEP. ATTACH APRONS Aprons secure to the table frame with H and H3 brackets. P H H H5 H3 H H H H H P H P9 H3 H5 P H5 P P Note: Please leave the main frame face down in the carton that it ships in until the aprons and legs are attached. All images are shown up-side-down as the table should be assembled. Please DO NOT step or lean on frame of table while assembling the table. DMI Sports -- For Customer Service Call

5 STEP. ATTACH APRON CORNER BRACKETS AND GOAL BOX Apron corner brackets (P8) slide into place to brace four aprons together. P8 P P STEP 3. LEG ASSEMBLY H3 H H P5 P P8 P3 H0 H0 P5 P P3 After four sides are attached to each other the leg base, P8, is attached with screws (H3). DMI Sports -5- For Customer Service Call

6 STEP. ATTACH LEG SUPPORT PANELS & LEGS Attach legs to frame of the table. Do not tighten until the leg support panels are attached to each leg. Once support panels are attached to legs with metal plates (P) legs can be to the frame. P0 P7 H P0 P P0 H P7 H P0 H7 STEP 6. ATTACH CONSOLE Wire the console to each goal and then plug the power cord in to test that scoring matches P the console can be secured with screws H7. STEP 5. TURN TABLE OVER Turning table over with the assistance of at least one adult (minimum adults), gradually lift and turn your new hockey table over. Do not rest the weight of the table frame on just two legs as you are turning table right-side-up. DMI Sports -6- For Customer Service Call

7 STEP:6 Attach the On/Off Switch (P7) to the Side Apron (P9) using Screws (). Insert the adapter () into the Plug Box and secure using the U Bracket (P9) and two screws (). Insert the Blower Motor plug into the Plug Box. P7 Power Plug P9 Plug Box Blower Plug STEP:7 Connect goal sensor wires, console wire, adapter wire and rail light wires to junction box as shown. P Lighting Lighting Junction Box Goal Sensor Wire Goal Sensor Wire Lighting DMI Sports -7- For Customer Service Call

8 PARTS RE-ORDER FORM DATE: NAME: ADDRESS: CITY: REF P P P3 P P5 P7 P8 H H H3 H H5 H7 H0 H H H3 H H5 H6 P0 P P P3 P P5 QTY HT600 Hockey Table STATE: PHONE: ZIP CODE: PART# DESCRIPTION UNIT PRICE P9 RPHT600-SPANEL Side PanelWith on/off slot RPHT600-BOLT8 RPHT600-WASHR9 RPHT600-SCREW RPHT600-BOLT.5 RPHT600-HEXNUT RPHT600-WASHR RPHT600-BOLT3/6 RPHT600-SCREW5 RPHT600-SCREW RPHT600-SCREWF RPHT600-SCREW5/6 / *8MM Bolt / *9MM Washer F* Screw 5/6 * -/ Bolt 5/6 Hex Nut 5/6 * 9MM Washer 3/6 Bolt T * 5MM Screw T * MM Screw F* -3/ Leg Screw 5/6 * -3/ Leg Bolt RPHT600-UBRACKET U Plastic Bracket 3.00 RPHT600-LBRACKET L Plastic Bracket RPHT600-LEGPLATE Metal Leg Plate.00 RPHT600 -ALLENKEY Allen Key.00 RPHT600 -WRENCH Wrench.00 RPHT600-SPANEL RPHT600-EPANEL RPHT600-LLEG RPHT600-RLEG RPHT600-MLEGA RPHT600-MLEGB RPHT600-LEGPANEL RPHT600-LEGBASE RPHT600-LEGLEV RPHT600-CONSOLE RPHT600-GOALBOX RPHT-PUSHER RPHT-FELT RPHT-PUCK RPHT600-ADAPTER Side Panel End Panel Left Leg Panel Right Leg Panel Middle Leg Panel-A Middle Leg Panel-B Leg End Panel Leg Base Leg Leveler Console Goal Box Deluxe Power Pusher Hockey felt Puck Adapter P7 RPHT600-SWITCH Switch Box And Control Plug 5.00 P8 P9 P0 P RPHT600-CORNER RPHT600-UBRACKET RPHT600-Lighting Box RPHT600-Sensor Wire Apron Corner U Bracket Lighting Junction Box Goal Sensor Wire Send this form along with your check or money order payable to: DMI SPORTS 300 Virginia Drive, Suite 0 Fort Washington, PA TOTAL AMOUNT SHIPPING AND HANDLNG: Up to $.00 add $.00 for S&H Over $.00 add $8.00 for S&H Subtotal: PA Residents Add 6% State Sales Tax: Shipping and Handling Charges: TOTAL: