The following are available to the student online from the Nova Scotia Government and the Government of Canada at no charge.
|
|
- Clifton Preston
- 6 years ago
- Views:
Transcription
1 Book List (Revised Sept 2016) LEVEL 1 NRC National Building Code Current Edition CARA 0800 Construction Safety 1. Alberta ILM a Safety legislation, Regulations & Policy in the Trades 2. Alberta ILM c Hazardous Materials & Fire Protection 3. Alberta ILM a Commercial & Industrial Construction Site Safety 4. Alberta ILM a Industrial Construction Site Safety 5. Alberta ILM b Climbing, Lifting, Rigging and Hoisting 6. Site Preparation NSCC Apprenticeship, Pearson Custom Library ISBN# Carpentry Forms Level 3 NCCER Pearson ISBN The following are available to the student online from the Nova Scotia Government and the Government of Canada at no charge. 8. Nova Scotia Health & Safety Act 9. Nova Scotia General Safety Regulations 10. Canada Health & Safety Regulations CARA 0801 Carpentry Tools 1. Alberta ILM a Hand Tools 2. Alberta ILM b Portable Power Tools 3. Alberta ILM c Stationary Power Tools 4. Alberta ILM d Cutters, Bits and Abrasives 5. Alberta ILM e Explosive Actuated Tools 6. Alberta ILM f Pneumatic & Fuel Powered Tools 7. Alberta ILM d Construction Equipment Safety 8. Alberta ILM bA Scaffolding Part A 9. Alberta ILM bB Scaffolding Part B The following are available to the student online from the Nova Scotia Government and the Government of Canada at no charge. 10. Nova Scotia Health & Safety Act 11. Nova Scotia General Safety Regulations 12. Canada Health & Safety Regulations CARA0802 Construction Blueprints 1. Alberta ILM c Interpretation Build Codes & Standards 2. NSCC Communications Pearson Custom Library ISBN# Understanding Construction Drawings Tom Stephenson ISBN#
2 CARA 0824 Introduction to Building Materials 1. Alberta ILM f Solid Wood Products & Wood Joinery 2. Alberta ILM g Manufactured Construction Products 3. Alberta ILM h Fasteners, Adhesives and Sealants 4. Carpentry Forms Level 3 NCCER Pearson ISBN Alberta ILM c Concrete Mix Design CARA 1827 BASIC SITE LAYOUT NSCC Basic Site Layout, Framing, Floor Wall Ceiling & Deck Framing, Stair Framing Pearson Custom Library Powell Chapter 3. ISBN# CARA 1828 BASIC FOUNDATIONS 1. Carpentry Forms Level 3 NCCER Pearson ISBN Understanding Construction Drawings Tom Stephenson ISBN# Alberta ILM eA Foundation Systems A 4. Alberta ILM eB Foundation Systems B CARA 1842 BASIC FRAMING 1. NSCC Basic Site Layout, Framing, Floor Wall Ceiling & Deck Framing, Stair Framing Pearson Custom Library Powell Chapter 3. ISBN# Understanding Construction Drawings Tom Stephenson, Chapter 7 ISBN# Alberta ILM b Building Loads & Forces 4. Alberta ILM f Floor Frame Support 5. Alberta ILM g Floor Frames
3 LEVEL 2 CARA 1821 Gable Roofs 2. Roof Framing, Pearson Custom Library, ISBN Carpenter Alberta Apprenticeship Learning Module # aA Roof Framing Systems Part A 5. Carpenter Alberta Apprenticeship Learning Module # aB Roof Framing Systems Part B 6. Carpenter Alberta Apprenticeship Learning Module # bAEngineered Truss Systems Part A 7. Carpenter Alberta Apprenticeship Learning Module # bBEngineered Truss Systems Part B CARA 1803 Equal Slope Hip Roofs 2. Roof Framing, Pearson Custom Library, ISBN , 4. Carpenter Alberta Apprenticeship Learning Module # aD Roof Framing Systems Part D 5. Carpenter Alberta Apprenticeship Learning Module # aE Roof Framing Systems - Part E CARA 1804 Equal Slope Intersecting Roofs 2. Roof Framing, Pearson Custom Library, ISBN Carpenter Alberta Apprenticeship Learning Module # aF Roof Framing Systems Part F 5. Carpenter Alberta Apprenticeship Learning Module # aG Roof Framing Systems - Part G CARA 1806 Exterior Cladding 2. Carpenter Alberta Apprenticeship Learning Module # bA Exterior Finishes Part A 3. Carpenter Alberta Apprenticeship Learning Module # bB Exterior Finishes Part B 4. Carpenter Alberta Apprenticeship Learning Module # c Commercial Exteriors 5. Carpenter Alberta Apprenticeship Learning Module # c Residential Roof Coverings 6. Carpenter Alberta Apprenticeship Learning Module # d Commercial Roofs CARA 1826 Windows and Doors 2. Carpenter Alberta Apprenticeship Learning Module # aA Windows and Doors Part A 3. Carpenter Alberta Apprenticeship Learning Module # aB Windows and Doors Part B 4. Carpenter Alberta Apprenticeship Learning Module # aCWindows and Doors Part C 5. Carpenter Alberta Apprenticeship Learning Module # b Commercial Doors and Windows 6. Doors and Door Hardware: NCCER, Pearson, ISBN
4 Level 3 CARA 1807 Floors, Walls, and Ceilings 2. Carpenter Alberta Apprenticeship Learning Module # k Flooring 3. Carpenter Alberta Apprenticeship Learning Module # g Interior Systems Calculations 4. Carpenter Alberta Apprenticeship Learning Module # aA Interior Systems and Door Frames Part A 5. Carpenter Alberta Apprenticeship Learning Module # aB Interior Systems and Door Frames Part B CARA 1809 Common Stairs 2. Carpenter Alberta Apprenticeship Learning Module # aA Single and Multi Flight Stairs Part A 3. Apprenticeship Learning Module # aB Single and Multi Flight Stairs Part B 4. Carpenter Alberta Apprenticeship Learning Module # b Housed Stairs CARA 1812 Advanced Stairs 2. Carpenter Alberta Apprenticeship Learning Module # c Winder Stairs 3. Carpenter Alberta Apprenticeship Learning Module # d Curved Stairs CARA 1811 Advanced Roofs 2. Carpenter Alberta Apprenticeship Learning Module # a Advanced Roof Framing CARA 1810 Cabinets and Millwork 2. Carpenter Alberta Apprenticeship Learning Module # h Trim Installation 3. Carpenter Alberta Apprenticeship Learning Module # j Wood Finishing 4. Carpenter Alberta Apprenticeship Learning Module # i Walls and Storage 5. Carpenter Alberta Apprenticeship Learning Module # g Cabinet Installation
5 Level 4 CARA 1814 Energy Efficient Construction 2. Carpenter Alberta Apprenticeship Learning Module # e Energy Efficient Construction 3. Carpenter Alberta Apprenticeship Learning Module # gA Energy Efficient Framing Part A 4. Carpenter Alberta Apprenticeship Learning Module # gB Energy Efficient Framing Part B 5. Carpenter Alberta Apprenticeship Learning Module # f Energy Efficient Building Design 6. Carpenter Alberta Apprenticeship Learning Module # h Insulation and Air Barriers CARA 1813 Heavy/Commercial Construction 2. Carpenter Alberta Apprenticeship Learning Module # f Construction Materials Management 3. Carpenter Alberta Apprenticeship Learning Module # e Job Scheduling 4. Carpenter Alberta Apprenticeship Learning Module # d Concrete Stairs 5. Carpenter Alberta Apprenticeship Learning Module # g Pre Stressed and Precast Concrete 6. Carpentry Forms Level 3 NCCER Pearson ISBN Advanced Roof/Wall Systems, NCCER, Pearson, ISBN CARA 1817 Renovations 2. Carpenter Alberta Apprenticeship Learning Module # aA Renovations Part A 3. Carpenter Alberta Apprenticeship Learning Module # aB Renovations Part B 4. Carpenter Alberta Apprenticeship Learning Module # b Additions 5. Carpenter Alberta Apprenticeship Learning Module # c Architectural Building Design Concepts 6. Carpenter Alberta Apprenticeship Learning Module # d Barrier Free Design and Ergonomics CARA 1815 Commercial Blueprints and Estimating 2. Carpenter Alberta Apprenticeship Learning Module #A020408aA Trade Math Part A. 3. Carpenter Alberta Apprenticeship Learning Module #A020408aB Trade Math Part B. 4. Carpenter Alberta Apprenticeship Learning Module #A020408aC Trade Math Part C. 5. Carpenter Alberta Apprenticeship Learning Module # c Industrial Project Costing 6. Carpenter Alberta Apprenticeship Learning Module # bA Drawing Interpretation Part A 7. Carpenter Alberta Apprenticeship Learning Module # f Industrial Drawing Interpretation The following modules are combined into the Jasper Blueprint which will be printed as one blueprint 18 x Carpenter Alberta Apprenticeship Learning Module Blueprint Package Part 1 Jasper Emergency Services Building #DP020407f. 9. Carpenter Alberta Apprenticeship Learning Module Blueprint Package Part 2 Jasper Emergency Services Building #DP020407g.
6 10. Carpenter Alberta Apprenticeship Learning Module Blueprint Package Part 3 Jasper Emergency Services Building #DP020407h. 11. Carpenter Alberta Apprenticeship Learning Module Blueprint Package Part 4 Jasper Emergency Services Building #DP020407i. 12. Carpenter Alberta Apprenticeship Learning Module Blueprint Package Part 5 Jasper Emergency Services Building #DP020407j. 13. Carpenter Alberta Apprenticeship Learning Module Blueprint Package Part 6 Jasper Emergency Services Building #DP020407k. 14. Carpenter Alberta Apprenticeship Learning Module Blueprint Package Part 7 Jasper Emergency Services Building #DP020407l.
Wisconsin Technical College System. Curriculum Standards & Program Design Summary CARPENTRY APPRENTICE (ABC)
Program Information Program Curriculum Standards & Program Design Summary 50-410-9 CARPENTRY APPRENTICE (ABC) Carpenters make up the largest building trades occupation in the industry and those with all-around
More informationCarpentry/Carpenter CIP Task Grid
1 Secondary Task List 100 SAFETY/OCCUPATIONAL ORIENTATION 101 Identify and follow all basic safety practices and procedures. 102 Identify and follow all lab safety practices and procedures. 103 Identify
More information& Carpentry. Building. Resources
& Carpentry Building Resources Carpentry Second Canadian Edition Floyd Vogt Michael Nauth 9780176502737 Welcome to the Second Canadian Edition of Carpentry. The 2010 National Building Code of Canada is
More informationCore Curriculum Carpentry 1 Carpentry 2 Carpentry 3
A Correlation of Core Curriculum Carpentry 1 Carpentry 3 To the Carpentry II Course Standards and Objectives to the Content Standards Resource Title: Core Curriculum: Introductory Craft Skills, Fifth Edition
More informationPassaic County Technical Institute CARPENTRY III JANUARY 2004
Passaic County Technical Institute CARPENTRY III JANUARY 2004 CARPENTRY II I. DESCRIPTION Carpentry three is a full year course will further develop skills established in the 9 th and 10 th grades. Emphasis
More informationExperienced Worker Assessment Blueprint Carpentry
Blueprint Carpentry Test Code: 0207 / Version: 01 Specific Competencies and Skills Tested in this Assessment: Hand Tools Use and maintain fastening and prying tools Use and maintain sawing and cutting
More informationAcademic Plan Building Construction 2
Academic Plan Building Construction 2 Orientation to the Trade PACING: 3 weeks Unit Number: 1 Construction lab/ shop rules. Safety Contract Tool usage procedures. 1. Describe the history of the carpentry
More informationStrands & Standards CARPENTRY 2
Strands & Standards CARPENTRY 2 COURSE DESCRIPTION This is the second in a sequence of courses that prepares individuals to layout, fabricate, erect, install, and repair wooden structures and fixtures
More informationPassaic County Technical Institute CARPENTRY II JANUARY 2004
Passaic County Technical Institute CARPENTRY II JANUARY 2004 CARPENTRY II I. DESCRIPTION Carpentry two is a full year course which is intended to introduce the student to the proper and safe use of materials,
More informationCourse Outcome Summary
Course Information: Description: Carpentry This class introduces students to basic carpentry practices, such as the use of hand and power tools, measurement, and layout practices. Skills will then be used
More informationCarpentry Level 1, 2014
A Correlation of Carpentry Level 1, Utah Core Curriculum for Resource Title: Carpentry Publisher: Pearson Education publishing as Prentice Hall ISBN: SE: 9780133403800 Media (text, software, internet,
More informationC a b i n e t m a k i n g T o o l s a n d E q u i p m e n t ( 1 1 A )
9 1 7 8 C a b i n e t m a k i n g T o o l s a n d E q u i p m e n t ( 1 1 A ) 30S/30E/30M A Cabinet and Furniture Making Course 9 1 7 8 : C a b i n e t m a k i n g T o o l s a n d E q u i p m e n t (
More informationOverview and Working Conditions of the Carpentry and Joinery Trades
Youth Explore Trades Skills Overview and Working Conditions of the Carpentry and Joinery Trades Description There are two fields of woodworking trades within the construction industry in British Columbia:
More informationStrands & Standards CONSTRUCTION TRADES FOUNDATION
Strands & Standards CONSTRUCTION TRADES FOUNDATION COURSE DESCRIPTION A course that generally prepares individuals in the following areas: basic safety, introduction to blueprint reading, introduction
More informationGrades 9 to 12 Carpentry. Manitoba Technical-Vocational Curriculum Framework of Outcomes
Grades 9 to 12 Manitoba Technical-Vocational Curriculum Framework of G r a d e s 9 t o 1 2 C a r p e n t r y Manitoba Technical-Vocational Curriculum Framework of 2013 Manitoba Education Manitoba Education
More informationC a r p e n t r y T o o l s a n d E q u i p m e n t ( 1 1 A )
9 1 8 8 C a r p e n t r y T o o l s a n d E q u i p m e n t ( 1 1 A ) 30S/30E/30M A Carpentry Course 9 1 8 8 C a r p e n t r y T o o l s a n d E q u i p m e n t ( 1 1 A ) 3 0 S / 3 0 E / 3 0 M Course
More informationCarpentry. EXAM INFORMATION Items. Points. Prerequisites. Course Length. Career Cluster EXAM BLUEPRINT. 1- Materials, Fasteners & Adhesives 10%
EXAM INFORMATION Items 73 Points 73 Prerequisites NONE Course Length DESCRIPTION This is the first in a sequence of courses that prepares individuals to layout, fabricate, erect, install, and repair wooden
More informationConstruction Trades Foundation
PRECISION EXAMS Construction Trades Foundation EXAM INFORMATION Items 65 Points 82 Prerequisites NONE Grade Level 10-12 Course Length ONE YEAR DESCRIPTION This course will focus on the foundation of construction
More informationUnit 9. Wall and Ceiling Framing
Unit 9 Wall and Ceiling Framing Wall construction Wall framing includes the assembly of horizontal and vertical members that make up exterior walls and interior partitions. Theses walls support the ceilings
More informationAssessment Blueprint
Assessment Blueprint Carpentry Basic 8326- Online Version 8327- Paper/Pencil Version Copyright 2009. All Rights Reserved. General Assessment Information Home Builders Institute Carpentry Basic General
More informationSUPPLEMENT TO THE APPLICATION FOR CARPENTER I (JOURNEYMAN)
(Carpenter I Page 1 of 11) Name SUPPLEMENT TO THE APPLICATION FOR CARPENTER I (JOURNEYMAN) TO ALL APPLICANTS: This form is used to obtain information about your knowledge, skill and ability to perform
More informationCabinetmaker Level 2
Level 2 A4 Tools and Equipment II Duration: 21 hours Theory: Practical: 14 hours 7 hours Upon completion of this unit the apprentice will demonstrate knowledge of maintaining and troubleshooting cabinetmaker
More informationF u r n i t u r e M a k i n g ( 1 2 A )
9 1 8 2 F u r n i t u r e M a k i n g ( 1 2 A ) 40S/40E/40M A Cabinet and Furniture Making Course 9 1 8 2 : F u r n i t u r e M a k i n g ( 1 2 A ) 4 0 S / 4 0 E / 4 0 M Course Description In this course,
More informationG r a d e 1 1 A F o u n d a t i o n s a n d F l o o r F r a m i n g
G r a d e 1 1 A F o u n d a t i o n s a n d F l o o r F r a m i n g G r a d e 1 1 A : F o u n d a t i o n s a n d F l o o r F r a m i n g Course Description Carpentry 11A: Foundations and Floor Framing
More informationTotal Test Questions: 65 Levels: Grades Units of Credit: 1.0
DESCRIPTION This course will focus on the foundation of construction trades. Students will learn and practice basic safety skills. They will need to understand and demonstrate basic math skills. Students
More informationF r a m i n g ( 1 1 B )
9 1 8 9 F r a m i n g ( 1 1 B ) 30S/30E/30M A Carpentry Course 9 1 8 9 F r a m i n g ( 1 1 B ) 3 0 S / 3 0 E / 3 0 M Course Description In this course, students will learn basic framing techniques. It
More informationMaterial List for Log Complete Packages
Material List for Log Complete Packages DAYLIGHT BASEMENT EXTERIOR WALLS ( If Applicable ) 2X6 Pressure Treated Sills With 6" Foam Sill Sealer 2X6 K.D. Spruce Plates And Studs 2X10 K.D. Spruce Headers
More informationWORK PROCESSES SCHEDULE CABINETMAKER O*NET/ SOC CODE: RAIS CODE: 0055
WORK PROCESSES SCHEDULE CABINETMAKER O*NET/ SOC CODE: 51-7011.0 RAIS CODE: 0055 The following schedule is an example of work experience (OJT) and training considered necessary to develop a skilled and
More informationARCHITECTURAL DESIGN II (544)
DESCRIPTION The second in a series, Architectural Design II prepares students with knowledge of residential architectural and related construction. Topics include; building materials, building codes, typical
More informationDOCUMENT LIST OF DRAWINGS, TABLES AND SCHEDULES
DOCUMENT 00 0115 LIST OF DRAWINGS, TABLES AND SCHEDULES DRAWINGS GENERAL A0.0 COVER SHEET ADDENDUM #2 revised A0.01 TITLE SHEET ADDENDUM #2 revised CIVIL C1.0 TOPO C2.0 DEMOLITION C3.0 TEMPORARY STREET
More informationThis specification describes the minimum requirements for structural steel drawings.
1/7 1.0 PURPOSE This specification describes the minimum requirements for structural steel drawings. 2.0 GENERAL As stated in specification SPEC-0800, drawings are intended to be Design drawings. Sufficient
More informationGrade Level Benchmarks and Components
Grade Level Benchmarks (GLB) describe the concepts and skills we want students to know and be able to demonstrate in each grade level and each course. Teachers will assess student academic performance
More informationSTATEWIDE CAREER/TECHNICAL EDUCATION COURSE ARTICULATION REVIEW MINUTES
STATEWIDE CAREER/TECHNICAL EDUCATION COURSE ARTICULATION REVIEW MINUTES Articulation Agreement Identifier: BUC 110 (2007-1) Identifier is the postsecondary course prefix followed by Plan-of- Instruction
More informationEntry Level Assessment Blueprint Carpentry
Entry Level Assessment Blueprint Test Code: 4115 / Version: 01 Specific Competencies and Skills Tested in this Assessment: Safety Demonstrate safe material handling practices Display comprehension of workplace/job-site
More informationEntry Level Assessment Blueprint Carpentry
Entry Level Assessment Blueprint Carpentry Test Code: 4215 / Version: 01 Specific Competencies and Skills Tested in this Assessment: Safety Demonstrate safe material handling practices Display comprehension
More informationCROCUS PLAINS BUILDING CONSTRUCTION COURSE OUTLINE. 3. Feirer & Feirer Carpentry & Building Construction
CROCUS PLAINS BUILDING CONSTRUCTION COURSE OUTLINE Course Name: Course Number: Carpentry Fundamentals BCA20S Text/Learning Resources: 1. Canada Housing and Mortgage Corporation Canadian Wood Frame Construction
More informationAssessments: 3003 Finish Carpenter 3005 Frame Carpenter. Aligned to NCCER National Standards and HBI Residential Standards & Key Requirements
Carpentry Study Guide Assessments: 3003 Finish Carpenter 3005 Frame Carpenter Aligned to NCCER National Standards and HBI Residential Standards & Key Requirements Endorsed By: Overview This study guide
More informationJob Ready Assessment Blueprint. Carpentry. Test Code: 4215 / Version: 01. Copyright All Rights Reserved.
Job Ready Assessment Blueprint Carpentry Test Code: 4215 / Version: 01 Copyright 2017. All Rights Reserved. General Assessment Information Blueprint Contents General Assessment Information Written Assessment
More informationSafety (OSHA 10 hour)
Construction Technology Core and Sustainable Construction Subject Code: 178000 Students will learn principles in basic safety (10-hr OSHA), construction math, hand and power tool are and operation, blueprint
More informationDesign Technology Architectural Design 2 The second in a sequence of courses that prepares individuals with knowledge of residential architectural
Design Technology Architectural Design 2 The second in a sequence of courses that prepares individuals with knowledge of residential architectural and related construction. This course includes instruction
More informationHIA AIR CARGO HAMILTON ADDENDUM #3. Addendum No. A03 (Architectural) o Text 1 page o SK-10a o SK-10b o SK-11
HIA AIR CARGO HAMILTON ADDENDUM # (This Addendum consists of six () pages) Cover sheet Schedule time lines for Architectural Precast, Miscellaneous Metals, Insulated Metal Panels, Roofing and Aluminum
More informationBTR 100. Blueprint Reading
BTR 100 Blueprint Reading Approved: December 3, 2010 EFFECTIVE DATE: Fall 2011 COURSE PACKAGE FORM Team Leader and Members Ken Kramer, Frank Port, Curtis Clough, Andra Goldberg Date of proposal to Curriculum
More informationBUILDING PLANS. BUILDING DEPARTMENT
BUILDING PLANS BUILDING DEPARTMENT 952-446-1660 www.cityofminnetrista.com This handout is intended only as a guide and is based in part on the 2015 Minnesota Residential Code, Minnetrista City ordinances,
More informationSecondary Wood Products Manufacturing 2015
Secondary Wood Products Manufacturing 2015 Forest Industry Sectors Tertiary Primary Secondary Forest Industry Sectors Tertiary Secondary Primary Primary Sector Sawmilling Pulp and paper Composite panel
More informationJoshua Woodsman
CONSTRUCTION GUIDE of one of our design Please Note This electronic document is protected by the identifier against unauthorized dissemination on the Internet. Before building any structure make sure you
More informationRECORD GROUP NUMBER 156
DEPARTMENT OF MENTAL HEALTH AND MENTAL RETARDATION HOSPITAL AND SCHOOL FOR THE RETARDED ARLINGTON, TENN. BLUEPRINTS, 1965 RECORD GROUP NUMBER 156 Processed by: David R. Sowell Archival Technical Services
More informationA d v a n c e d C a b i n e t r y ( 1 2 B )
9 1 8 3 A d v a n c e d C a b i n e t r y ( 1 2 B ) 40S/40E/40M A Cabinet and Furniture Making Course 9 1 8 3 : A d v a n c e d C a b i n e t r y ( 1 2 B ) 4 0 S / 4 0 E / 4 0 M Course Description This
More informationSheet Metal Worker Level 2
Level 2 Unit: B1 Welding 2 (GMAW and SMAW) Level: Two Duration: 25 hours Theory: Practical: 5 hours 20 hours Overview: Upon completion of this unit of instruction the apprentice will demonstrate knowledge
More informationBRICKLAYER TRADE REGULATION
Province of Alberta APPRENTICESHIP AND INDUSTRY TRAINING ACT BRICKLAYER TRADE REGULATION Alberta Regulation 265/2000 With amendments up to and including Alberta Regulation 119/2018 Current as of June 20,
More informationAbout 32 percent of all carpenters the largest construction trade were selfemployed.
http://www.bls.gov/oco/ocos202.htm Carpenters Nature of the Work Training, Other Qualifications, and Advancement Employment Job Outlook Projections Data Earnings OES Data Related Occupations Sources of
More informationCredentials for Career Technical Education Teachers and/or Students
s for Career Technical Education Teachers and/or Students 2012-2013 Concentration - Automotive Technology Engine National Institute for Automotive Performance* Service Excellence () Brakes* Electrical/
More informationUlltraclad Aluminium Cladding. Contents. 1.0 General Information Design Information Installation Information 7. 4.
Ulltraclad Aluminium Cladding Contents 1.0 General Information 2 2.0 Design Information 4 3.0 Installation Information 7 4.0 Maintenance 10 5.0 Health & Safety 10 1 1.0 General Information 1.1 Introduction
More informationCSI Section DMI Light Gage Structural Steel Framing Systems. Blocking Fire Rated Pre-cut (Proprietary) Furring Wall Preservative Treated
DMI Database CCF5IF9HGLPD-QB (4,88) $14,775.00 CSI Section 05400 DMI Light Gage Structural Steel Framing Systems Angle Framing Bridging Channel Flat Strapping Furring Clip Angle Soffit/Fascia/Deck Framing
More information[PDF] Modern Carpentry
[PDF] Modern Carpentry Modern Carpentry provides detailed coverage of all aspects of light frame construction, including site preparation and layout, foundations, framing and sheathing, roofing, windows
More informationBRYANT HERITAGE PLAZA 5301 Magasin Avenue Beaumont, AB
BRYANT HERITAGE PLAZA, AB RE-ISSUED FOR BUILDING PERMIT May 9, 206 L I S T O F D R A W I N G S HD ENGINEERING SERVICES LTD. D.B.K. ENGINEERING LTD. D.B.K. ENGINEERING LTD. JUBILEE ENGINEERING CONSULTANTS
More informationFraming Tech 1
Western Technical College 31410366 Framing Tech 1 Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits 3.00 Total Hours 108.00 This course introduces the
More informationDave's Glossary of Construction Terms. by Dave Osborne (www.daveosborne.com)
Dave's Glossary of Construction Terms by Dave Osborne (www.daveosborne.com) 5/4" A thickness of decking material between 1 x 6 and 2 x 6. Although it is called 5/4 x 6, it is actually 1" thick and 5 1/2"
More information*For complete material(s) information, refer to
Butler Community College Science, Technology, Engineering, and Math Division Brett Trimpe Revised Spring 2016 Implemented Fall 2016 COURSE OUTLINE Residential Design and CAD I Course Description EN 103.
More informationRevised April Unit/Standard Number. Proficiency Level Achieved: (X) Indicates Competency Achieved to Industry Proficiency Level
Secondary Task List 100 DEMONSTRATE SAFETY IN THE BUILDING AND PROPERTY MAINTENANCE PROGRAM 101 Demonstrate knowledge of general shop safety. 102 Wear appropriate personal protective clothing. 103 Wear
More informationNCCER Progress Blvd, Alachua, Florida Phone: (888)
NCCER 13614 Progress Blvd, Alachua, Florida 32615 Phone: (888) 622-3720 E-mail: info@nccer.org PIPEFITTING Competencies / Objectives Level One MODULE 08101-06 - ORIENTATION TO THE TRADE 1. Describe the
More informationBritish Columbia Carpenter Apprenticeship Program
British Columbia Carpenter Apprenticeship Program Level 3 Line H Competency H-7 Build Intersecting Roofs 7960003573 Ordering Crown Publications, Queen s Printer PO Box 9452 Stn Prov Govt 563 Superior St.
More informationFASTENERS BUILDING DEPARTMENT
FASTENERS BUILDING DEPARTMENT 952-446-1660 WWW.CITYOFMINNETRISTA.COM This handout is intended only as a guide and is based in part on the 2015 Minnesota Residential Code, Minnetrista City ordinances, and
More informationDOCUMENT SUBMITTAL REQUIREMENTS FOR A NEW MULTI-FAMILY DWELLING
INFORMATION BULLETIN / GENERAL INFORMATION REFERENCE NO.: None DOCUMENT NO. P/GI 2014-007 Previously Issued As: P/GI 2011-007 Effective: 01-01-2014 Revised: DOCUMENT SUBMITTAL REQUIREMENTS FOR A NEW MULTI-FAMILY
More informationINSTALLATION GUIDE WOOD PIVOTING CIRCLE/ OVAL
WOOD PIVOTING CIRCLE/ OVAL READ SPECIFIC INSTALLATION INSTRUCTIONS COMPLETELY BEFORE STARTING ANY INSTALLATION Failure to install and maintain our product according to these instructions will VOID any
More informationIndustrial Technology Curriculum
Industrial Technology Curriculum Written 2009-2010 Mission Statement: Industrial Technology The Mission of the Oskaloosa Community School Industrial Technology Department is to provide opportunities to
More informationARCHITECTURE CADD Course Syllabus
6111 E. Skelly Drive P. O. Box 477200 Tulsa, OK 74147-7200 ARCHITECTURE CADD Course Syllabus Course Number: TTC-0880 OHLAP Credit: Yes OCAS Code: 8903 Course Length: 120 Hours Career Cluster: Manufacturing
More informationINSTALLATION. For more information on this product or to order samples call or visit our website at builddirect.com.
Page 1 Page 2 Page 3 Page 4 Page 5 1. Door Assembly: Step A: Attach part #34 to part #35 with screws #65/67. Step B & C: Attach part# 34.35(36) to part #33 with two #70 screws. Step D: Insert door bottom
More informationBUILDING PLANS. BUILDING INSPECTIONS DEPARTMENT
BUILDING PLANS BUILDING INSPECTIONS DEPARTMENT 507-537-6773 www.ci.marshall.mn.us This handout is intended only as a guide to the subject matter covered herein and is based in part on the 2015 Minnesota
More informationCabinetmaker Level 1
Level 1 A1 Orientation 1: Structure and Scope of Cabinetmaker Duration: 7 hours 7 Hours 0 Hours This unit profiles the trade s significance, core tasks, skill requirements, job-ladders and long-term career
More informationLandmarks Preservation Commission Tacoma Economic Development Department Culture and Tourism Division
Tacoma Economic Development Department Culture and Tourism Division 747 Market Street Room 1036 Tacoma WA 98402-3793 253.591.5220 APPLICATION FOR DESIGN REVIEW FOR SINGLE FAMILY RESIDENTIAL PROPERTIES
More informationMaterial Description Qty Units Cost Total SQUARE FOOTAGE TOTAL Area 1692 sqft
Material Report for plan: Willowdale A Page 1 of 7 SQUARE FOOTAGE TOTAL Area 1692 sqft EXCAVATION & FOUNDATION EXCAVATION & BACKFILL Conc. Footing (volume) 5 m³ 122.50 612.50 Conc. Footing (length) 6"x20"
More informationIndustrial Technology Scope and Sequence Louisburg USD #416
Topic Flight Rocketry Computer graphics and digital video Technology (7) Apply principles of aerodynamics and lift to create and test a wing. Use a navigation ruler and map to determine the direction and
More informationCut Saw SP / EN-W
11-05 / EN-W Saws with angled and inclined cuts Randek s SP720 series provides reliable cut saws that are a major asset to roof truss and house producers around the world. The SP720 cut saw is effective,
More informationConstruction III Curriculum Maps
Curriculum Maps Unit 1: Shop Safety Unit 2: Shop Equipment and Tool Review Unit 3: Project I Unit 4: Building Plans and Materials Unit 5: Footings and Foundations Unit 6: Floor Framing Unit 7: Wall Framing
More informationMetro Series Sauna. installation instructions
Metro Series Sauna installation instructions Please immediately check for any hidden damage that may have occurred in shipping. If any damage is found you must notify the delivering carrier within seven
More informationDimension Below are the critical settings in AutoCAD. Other software should follow the same settings.
8.1 Drawing Standard 8.1.1 Introduction This drawing standard applies to all building drawings being prepared for the University of Calgary (UCalgary) by external consultants or vendors and internal staff
More informationHierarchy of Values. Background to Taxonomies. Taxonomy of Wood Products 2017
Background to Taxonomies Setting the Stage Most of forest land in Canada owned by Provincial governments (not the global norm) exceptions include Irving (mostly NB and Maine) and Vancouver Island in BC
More informationCarpentry. Full Time
Full Time Cabinet Maker Manufacturing Job Number: 3643 Shop Production Worker Installer Millwork Hours/Days: Monday-Friday Salary: $16.00/hr. Requirements: Los Angeles, CA Skills Requirements: Minimum
More informationSingle-Family Dwelling Submittal Requirements
Single-Family Dwelling Submittal Requirements The purpose of this guideline is to assist our customers in preparing for plan submittal. The items listed must be included before your plans can be accepted
More informationA-308 SITE 75A. Gensler 2020 K Street, Northwest Suite 200 Washington DC Telephone Facsimile
Telephone 0.7.500 //0 06-G/06-G EXTERIOR RENDERINGS A-08 0 NOTE: SIGNAGE SHOWN FOR ILLUSTRATIVE PURPOSES ONLY. STREETSCAPE DETAILS ARE SHOWN IN CONCEPT FOR ILLUSTRATIVE PURPOSES. THE FINAL DETAILS OF THE
More informationVENTED GABLE DETAIL ROOF PANEL GABLE FLASHING 24" C/C MAX. BUTYL SEALANT TAPE ROOF PURLIN FLASH AB-1, AB-2, AB-3, OR AB-4
ROOF PANEL GABLE FLASHING FASTENER @ 24" C/C MAX. ROOF PURLIN BUTYL SEALANT TAPE FLASH AB-1, AB-2, AB-3, OR AB-4 FASTENER @ EVERY MAJOR RIB OR 12" C/C MAX. F-J TRIM FABRAL ALUMINUM SOFFIT FASTENER 24"
More informationCAREER PATHWAY CARPENTRY CIP Code Pennsylvania's Targeted Industry Cluster: Architecture & Construction
CAREER PATHWAY CARPENTRY CIP Code 46.0201 Pennsylvania's Targeted Industry Cluster: Architecture & Construction Potential Careers 47-2031 Carpenters 47-3012 Helpers - Carpenters National and State Occupational
More informationRequired Documents for Commercial Permits Permit Types 1. New Structure 2. Addition 3. Remodel 4. Tenant Finish 5. Change of Tenant/Use 6.
Required Documents for Commercial Permits Permit Types 1. New Structure 2. Addition 3. Remodel 4. Tenant Finish 5. Change of Tenant/Use 6. Temporary Use 7. Decks over 30 inches 8. Re-Roof 9. Plumbing 10.
More informationCARPENTRY AND JOINERY
EXAMINATION SCHEME CARPENTRY AND JOINERY There will be three papers, Papers 1, 2 and 3, all of which must to be taken. Papers 1 and 2 will be a composite paper to be taken at one sitting. Paper 1: Paper
More informationWAYNESBORO AREA SCHOOL DISTRICT CURRICULUM INTRODUCTION TO ENGINEERING
UNIT: Classroom rules and procedures NO. OF DAYS: 2 KEY LEARNING(S): Expectations and classroom procedures UNIT : What are the expectations and classroom procedures in the CAD room 3.4.12.A3. Demonstrate
More informationADDENDUM NO. 2. Germania Club Renovation Phase 2. Saginaw County Community Mental Health Authority WILLIAM A. KIBBE & ASSOCIATES, INC.
ADDENDUM NO. 2 PROJECT: OWNER: ENGINEER / ARCHITECT: PROJECT LOCATION: Saginaw County Community Mental Health Authority Germania Club Renovation Phase 2 Saginaw County Community Mental Health Authority
More informationBest Materials LLC distributes backer rod, caulking and sealants for all types of EIFS joints and penetration sealing applications.
Best Materials LLC distributes backer rod, caulking and sealants for all types of EIFS joints and penetration sealing applications. EXTERIOR INSULATION & FINISH SYSTEM CONSTRUCTION Data Published Courtesy
More information3. Are component and cladding design pressures consistent with ASCE 7 for the wind speed and exposure category (ASCE 7 Fig. 6-3)?
Mobile County Public Works Residential Plan Reviewers Checklist For Structural Requirements of Wood Framed Residences Recommendation: Permit as Noted Revise Plans and Resubmit MCPW Ref. No. Design Criteria:
More informationSTATEWIDE CAREER/TECHNICAL EDUCATION COURSE ARTICULATION REVIEW MINUTES
STATEWIDE CAREER/TECHNICAL EDUCATION COURSE ARTICULATION REVIEW MINUTES Articulation Agreement Identifier: CAR 111 & CAR 114 (2006-1) Identifier is the postsecondary course prefix followed by Plan-of-
More informationChapter 17 - Porch Trim
Chapter 17 - Porch Trim Contents Chapter 17 - Porch Trim... 17-1 Timing & Prerequisites... 17-2 Trim on Porch Beams (Volunteer)... 17-4 Smart Trim on the Bottom of the Beam... 17-4 Smart Trim on the Inside
More informationPerkins Statewide Articulation Agreement. Documentation item: Secondary Competency Task List Coversheet
Perkins Statewide Articulation Agreement Documentation item: Secondary Task List Coversheet The Secondary School agrees to: A. Implement the approved PDE Program(s) of Study. B. Provide assessment of student
More informationHOENER ASSOCIATES INC. ARCHITECTS
HOENER ASSOCIATES INC. ARCHITECTS BRUCE D. DELL MARK REUTHER ADDENDUM NO. 1 PROJECT 15-22C RENOVATION AND SITE WORK AT: BUILDING B DDRB OF ST. CHARLES DEVELOPMENT DISABILITIES RESOURCE BOARD ST. CHARLES,
More informationWALL TO FABRICATED FLOOR
WALL TO FABRICATED FLOOR PERIMETER WALL IS HELD IN PLACE BY WOODEN STRIP SCREED OPTIONAL NSF COVED FLOOR IS SHOWN PARTITION WALL IS HELD IN PLACE BY WOODEN STRIP SCREED OPTIONAL NSF COVED FLOOR IS SHOWN
More informationCABINETMAKING. ELIGIBILITY Open to active SkillsUSA members enrolled in programs with cabinetmaking or millwork as the occupational objective.
The following rules are for the state contest only. Students/Teams that qualify for the national contest need to adhere to the rules and guidelines for that national contest. The rules can be found in
More informationNational Craft Assessment and Certification Program S P E C I F I C A T I O N S
National Craft Assessment and Certification Program S P E C I F I C A T I O N S INDUSTRIAL MAINTENANCE MECHANIC V4 MEMT32_04 Released June 2013 Focus Statement A journey-level Industrial Maintenance Mechanic
More informationQuestions. Paul Ross Wallach V7198. Published by Hearlihy P.O. Box 1747 Pittsburg, KS
Questions for Blueprint-Reading Exams Paul Ross Wallach Published by Hearlihy P.O. Box 1747 Pittsburg, KS 66762 866-622-1003 www.hearlihy.com 81861 V7198 Copyright 2007 by Hearlihy. Except for making transparencies
More informationContents OVERVIEW INTRODUCTION TO CHIEF ARCHITECT GETTING READY TO DRAW QUICK START VACATION CABIN: FLOOR PLAN. How this Book is Put Together
Contents OVERVIEW How this Book is Put Together Conventions Icon Key Files on the Website INTRODUCTION TO CHIEF ARCHITECT The Chief Architect Interface Working with the Toolbars Chief Architect s Views
More informationAssembled Patio Door Installation Guide 2-Panel Patio Door with Non-Welded Frame
Assembled Patio Door Installation Guide 2-Panel Patio Door with Non-Welded Frame americancraftsmanwindows.com American Craftsman and all other marks where denoted are trademarks of Andersen Corporation
More informationTO WHOM IT MAY CONCERN:
TO WHOM IT MAY CONCERN: A lot of questions are asked throughout the year as to when a building permit is required. This list may help identify some of the instances when a permit would be required: Permit
More information8 Ft Wide Enclosure Assembly Guide
www.rmfiberglass.com 8 Ft Wide Enclosure Assembly Guide RM Products Ltd 1-800-363-0867 www.rmfiberglass.com Table of Contents 1. Parts and Tools List page 3 2. Hardware page 4 3. Maintenance page 5 4.
More information