Industrial Technology Curriculum
|
|
- Marion Reynolds
- 5 years ago
- Views:
Transcription
1 Industrial Technology Curriculum Written
2 Mission Statement: Industrial Technology The Mission of the Oskaloosa Community School Industrial Technology Department is to provide opportunities to develop and enhance the knowledge and hands-on skills needed to succeed in the technology workplace and to foster a desire for lifelong learning. s Middle School Problem Solving Problem Solving students will utilize the design process to participate in a variety of hands- on projects. Design Concepts Design Concepts students will use a variety of drafting techniques to develop and construct projects. Construction Technology Construction Technology students will apply basic construction principles to real- life, hands- on projects. Material Processing Material Processing students will demonstrate the use and purpose of many techniques used in manufacturing today. High School Mechanical Drawing Mechanical Drawing students will familiarize themselves with the common drafting instruments in a variety of areas of drafting along with an introduction to AutoCAD. Machine Drawing Machine Drawing students will acquire a working knowledge of AutoCAD in 2D and 3D modeling formats. Architectural Drafting Architectural Drafting students will complete a full set of house plans of his or her choice and construct a scale model house of those plans. Drafting 1 Drafting 1 students will utilize elementary drafting principles used by drafters everywhere.
3 Construction Technology I Construction Technology I students will apply the construction practices of safety, concrete, masonry, metals, woods, plastics, framing, thermal and moisture protection, doors and windows, finishes, electrical, plumbing, and HVAC through the construction of an out of classroom project. Wood Technology Wood Technology students will explore the basic concepts of Industrial Technology including woodworking machine safety and operation through the demonstration of skills acquired throughout the class. Cabinet Making Cabinet Making students will construct projects using advanced methods of designing, planning, jointing, cutting, and assembling furniture and cabinets. Construction Technology II Construction Technology II students will further their training of the trades and explore the management of a construction jobsite. Company Management Company Management students will explore the basic principles of manufacturing and apply knowledge to create a company to manufacture and market a product. Introduction to CAD Introduction to CAD students, with the information learned in Drafting 1, will expand their knowledge of the drafting community through AutoCAD. Material Processing Material Processing students will explore the manufacturing and processing of a variety of materials.
4 Problem Solving Problem Solving students will utilize the design process to participate in a variety of hands-on projects. IT.PS.01: Students will demonstrate their ability to measure. IT.PS Students will identify all increments of a standard inch down to 1/16 th. IT.PS Students will demonstrate their ability to read measurements and then draw those measurements. IT.PS Students will estimate object dimensions and then find the actual dimensions. IT.PS.02: Students will demonstrate basic design techniques by creating a variety of drawings. IT.PS Students will demonstrate proper use and maintenance of basic drafting IT.PS Students will explain the importance of doing sketching exercises to begin bringing ideas to fruition. IT.PS Students will develop the skills necessary to begin thinking three dimensionally. IT.PS Students will observe and duplicate drawings being demonstrated. IT.PS.03: Students will apply the basic design process by completing a variety of classroom projects. IT.PS Students will explain the importance of planning. IT.PS Students will participate in team building and team processes. IT.PS Students will demonstrate the design process. IT.PS Students will create and evaluate several projects. IT.PS Students will participate in hands- on activities to demonstrate understanding of basic design processes.
5 Design Concepts Design Concepts students will use a variety of drafting techniques to develop and construct projects. IT.DC.01: Students will demonstrate their ability to measure. IT.DC Students will identify all increments of a standard inch down to 1/16 th. Students will demonstrate their ability to read measurements and then draw those measurements. IT.DC Students will estimate object dimensions and then find the actual dimensions. IT.DC Students will demonstrate their ability to make scale conversions. IT.DC.02: Students will demonstrate basic design techniques by creating a variety of drawings. IT.DC Students will demonstrate proper use and maintenance of basic drafting IT.DC Students will explain the importance of doing sketching exercises to begin bringing ideas to fruition. IT.DC Students will develop the skills necessary to draw in 3- D. IT.DC Students will observe and duplicate drawings being. IT.DC.03: Students will apply the basic design process by completing a variety of classroom projects. IT.DC Students will explain the importance of planning. IT.DC Students will participate in team building and team processes. IT.DC Students will demonstrate the design process. IT.DC Students will participate in hands- on activities to demonstrate their understanding of basic design processes.
6 Construction Technology Construction Technology students will apply basic construction principles to real-life, hands-on projects. IT.CT.01: Students will demonstrate their ability to measure with accuracy within 1/16 th of an inch. IT.CT Students will identify all increments of a standard inch down to 1/16 th. IT.CT Students will demonstrate their ability to use a tape measure. IT.CT Students will estimate object dimensions and then find the actual dimension. IT.CT Students will demonstrate their ability to duplicate measurement for layout purposes. IT.CT Students will demonstrate their understanding of measurement by completing a building project. IT.CT.02: Students will demonstrate their knowledge and ability to use safe shop and workplace practices. IT.CT Students will use tools correctly and safely. IT.CT Students will monitor safe work practices. IT.CT Students will explain reasons for tool safety and demonstrate safety in workplace practices. IT.CT.03: Students will apply methods used to complete the carpentry for a construction project. IT.CT Students will demonstrate their ability to layout and construct a floor system. IT.CT Students will demonstrate their ability to layout and assemble walls. IT.CT Students will design and assemble trusses using a jig.
7 Material Processing Materials and Processes students will demonstrate the use and purpose of many techniques used in manufacturing today. IT.MP.01: Students will demonstrate the proper processes and procedures used to produce a specified metal and wood product. IT.MP The student will measure, calculate and layout precision patterns. IT.MP The student will demonstrate proper care and storage of lab tools. IT.MP The student will identify and maintain hand- tools for a specific job. IT.MP The student will interpret and use prints, charts, diagrams, tables and graphs. IT.MP The student will demonstrate material forming processes. IT.MP.02: Students will demonstrate the proper procedures of forming and pouring a concrete molding. IT.MP Students will measure, calculate and blend raw materials. IT.MP The student will demonstrate proper care and storage of lab tools. IT.MP The student will demonstrate material forming processes. IT.MP.03: Students will demonstrate the proper procedures to produce an engraving plate. IT.MP Students will measure parts using precision measurement tools. IT.MP Students will measure, calculate and layout precision patterns. IT.MP Student will demonstrate ability to set- up and operate engraver. IT.MP.04: Students will demonstrate the proper procedures in the woodworking process. IT.MP The student will measure, calculate and layout precision patterns. IT.MP The student will demonstrate proper care and storage of lab tools. IT.MP The student will identify and maintain hand- tools. IT.MP The student will interpret and use prints, charts, diagrams, tables and graphs. IT.MP The student will produce a functional woodworking project.
8 Mechanical Drawing Mechanical Drafting students will familiarize themselves with the common drafting instruments in a variety of areas of drafting along with an introduction to AutoCAD. IT.Mech.01 Students will determine which careers related either directly or indirectly to drafting are of interest. IT.Mech Students will display knowledge of careers related to the drafting field. IT.Mech.02 Students will acquire the knowledge of proper use of pencil type, hardness, and techniques used for various lines in sketching. IT.Mech The student will identify and draw the various line types. IT.Mech The student will demonstrate correct freehand lettering techniques. IT.Mech The student will prepare drawings/designs using appropriate media IT.Mech The student will produce sketches proportionately with good line quality. IT.Mech.03 The student will explain and demonstrate how drafting instruments used in making a drawing. IT.Mech The student will use and maintain basic drafting equipment and machines. IT.Mech The student will identify and draw the various line types. IT.Mech The student will prepare drawings/designs using appropriate media. IT.Mech.04 The student will demonstrate the proper procedures using geometry to draw several polygons. IT.Mech The student will use and maintain basic drafting equipment and machines. IT.Mech The student will perform basic geometric constructions. IT.Mech The student will construct geometric shapes (e.g., pentagon,hexagon,octagon). IT.Mech The students will solve mathematical problems related to drafting (e.g., conversions of units) IT.Mech.05 The student will demonstrate the proper procedures for adding dimensions to a finished drawing. IT.Mech The student will apply basic dimensioning techniques. IT.Mech The students will solve mathematical problems related to drafting
9 IT.Mech.06 The student will explain how Isometric drawings differ from other types of drafting. IT.Mech The student will demonstrate how to reproduce drawings (e.g., IT.Mech The student will read and interpret a variety of drawings. IT.Mech.07 Students will acquire and exhibit the ability to use basic AutoCAD operation. IT.Mech The student will demonstrate basic CAD Operations. IT.Mech The student will demonstrate proper care and maintenance of CAD Equipment and software. IT.Mech The student will demonstrate proficiency in creating two- dimensional CAD drawings IT.Mech The student will demonstrate correct lettering techniques IT.Mech.08 Student will explain how Oblique drafting differs from Isometric Drafting, and what advantages does it have over Isometric drawing. IT.Mech The student will read and interpret a variety of drawings IT.Mech The student will prepare drawings/designs using appropriate media IT.Mech The student will construct axonometric, oblique and one and two point perspective drawings. IT.Mech The student will demonstrate proficiency in creating two- dimensional CAD drawings IT.Mech.09 How and why are section views vital when describing an object. IT.Mech Students will demonstrate basic CAD operations. IT.Mech Students will demonstrate basic care and maintenance of CAD Equipment and software IT.Mech Students will demonstrate Proficiency in creating two- dimensional CAD drawings IT.Mech.10 Students will construct development drawings and explain how is it used in the real world. IT.Mech The student will demonstrate basic CAD operations IT.Mech The student will demonstrate basic care and maintenance of CAD Equipment and software. IT.Mech The student will demonstrate proficiency in creating two- dimensional CAD drawings
10 IT.Mech.11. Students will demonstrate reasons to use a perspective drawing instead of an Isometric Drawing. IT.Mech Students will demonstrate basic CAD operations IT.Mech Students will demonstrate basic care and maintenance of CAD Equipment and software IT.Mech Students will demonstrate Proficiency in creating two- dimensional CAD drawings IT.Mech Students will demonstrate how to prepare drawings/designs using appropriate media. IT.Mech Students will demonstrate various lettering techniques(freehand or CAD) IT.Mech.12 Students will acquire the necessary skills to operate PlasmaCAM software and how it relates to AutoCAD. IT.Mech The students will prepare drawings/designs using appropriate media. IT.Mech The students will identify common manufacturing and construction materials
11 Machine Drawing Machine Drawing students will acquire a working knowledge of AutoCAD in 2D and 3D modeling formats. IT.Mach.01 Students will determine which careers related either directly or indirectly to drafting are of interest to the student. IT.Mach Students will display knowledge of careers related to the drafting field. IT.Mach.02 Students will acquire the knowledge and ability to draft interior and exterior thread representations. IT.Mach The student will demonstrate proper care and maintenance of CAD IT.Mach The student will demonstrate how to reproduce drawings (e.g., IT.Mach The student will read and interpret a variety of drawings. IT.Mach The student will demonstrate proficiency in creating two- dimensional CAD drawings IT.Mach.03 The student will produce working drawings using the proper views of an object and conform to the style and accepted practices of drafting conventions. IT.Mach The student will demonstrate proper care and maintenance of CAD IT.Mach The student will demonstrate how to reproduce drawings (e.g., IT.Mach The student will read and interpret a variety of drawings. IT.Mach The student will demonstrate proficiency in creating two- dimensional CAD drawings IT.Mach.04 The student will produce exploded assembly drawings using isometric or another pictorial method which shows how an object with many parts are assembled. IT.Mach The student will demonstrate proper care and maintenance of CAD IT.Mach The student will demonstrate how to reproduce drawings (e.g., IT.Mach The student will read and interpret a variety of drawings. IT.Mach The student will demonstrate proficiency in constructing exploded and orthographic assembly drawings.
12 IT.Mach.05 The student will determine when a sectioned drawing is required and which view would be the best to be sectioned. IT.Mach The student will demonstrate proper care and maintenance of CAD IT.Mach The student will demonstrate how to reproduce drawings (e.g., IT.Mach The student will read and interpret a variety of drawings. IT.Mach The student will demonstrate proficiency in constructing exploded and orthographic assembly drawings. IT.Mach The student will construct basic sectional views. IT.Mach.06 The student will be able to compute, draft, and use a conversion chart from metric to English units. IT.Mach The student will demonstrate proper care and maintenance of CAD IT.Mach The student will demonstrate how to reproduce drawings (e.g., IT.Mach The student will read and interpret a variety of drawings. IT.Mach The student will solve mathematical problems related to drafting. IT.Mach.07 Students will be able to decide when an auxiliary view is needed and determine which view should have the auxiliary and from what angle it should be drawn. IT.Mach The student will demonstrate proper care and maintenance of CAD IT.Mach The student will demonstrate how to reproduce drawings (e.g., IT.Mach The student will read and interpret a variety of drawings. IT.Mach The student will solve mathematical problems related to drafting. IT.Mach.08 Student will produce development drawings known by many other names, such as stretch-outs, layouts, sheet metal drafting. IT.Mach The student will demonstrate proper care and maintenance of CAD IT.Mach The student will demonstrate how to reproduce drawings (e.g., IT.Mach The student will read and interpret a variety of drawings. IT.Mach The student will solve mathematical problems related to drafting. IT.Mach.09 Students will produce perspective drawings showing objects from a one-point or two-point perspective show more than one surface at a time. IT.Mach The student will demonstrate proper care and maintenance of CAD IT.Mach The student will demonstrate how to reproduce drawings (e.g., IT.Mach The student will read and interpret a variety of drawings.
13 IT.Mach.10 Students will be able to explain what a cam and follower are and give definitions of the common associated terms. IT.Mach The student will demonstrate proper care and maintenance of CAD IT.Mach The student will demonstrate how to reproduce drawings (e.g., IT.Mach The student will read and interpret a variety of drawings. IT.Mach The student will solve mathematical problems related to drafting. IT.Mach.11 Students will demonstrate reasons to use a perspective drawing instead of an Isometric drawing. IT.Mach Students will demonstrate basic CAD operations IT.Mach Students will demonstrate basic care and maintenance of CAD Equipment and software IT.Mach Students will demonstrate Proficiency in creating two- dimensional CAD drawings IT.Mach Students will demonstrate how to prepare drawings/designs using appropriate media. IT.Mach Students will demonstrate various lettering techniques (freehand or CAD) IT.Mach.12 Students will acquire the necessary skills to operate Plasma CAM software and how it relates to AutoCAD. IT.Mach Students will prepare drawings/designs using appropriate media. IT.Mach Students will identify common manufacturing and construction materials.
14 Architectural Drafting Architectural Drafting students will complete a full set of house plans of his or her choice and construct a scale model house of those plans. IT.Arch.01 Students will display knowledge of the legal aspects and terminology associated with purchasing a house, and various architectural housing styles. IT.Arch The student will interpret drafting references and standards. IT.Arch The student will develop framing plans IT.Arch The student will develop, construct and dimension a residential floor plan layout. IT.Arch The student will produce foundation/ basement plans. IT.Arch.02 Students will identify and produce a cross-section of the belowgrade parts of a house such as footings, foundation wall, drain tile, crawl space or basement, reinforcing rod, termite shield, sill, sill plate. IT.Arch The student will use and maintain basic drafting equipment and machines. IT.Arch The student will identify and draw the various line types. IT.Arch The student will prepare drawings/designs using appropriate media. IT.Arch.03 Students will produce a skeleton view of a corner of a house which includes a door and window. IT.Arch The student will demonstrate proper care and maintenance of CAD IT.Arch The student will identify and draw the various line types. IT.Arch The student will demonstrate proficiency in creating two- dimensional CAD drawings. IT.Arch.04 Students will identify and produce a main floor plan of a house of his/her preference. IT.Arch The student will demonstrate proper care and maintenance of CAD IT.Arch The student will identify and draw the various line type
15 IT.Arch.05 The student will demonstrate the proper procedures for producing additional plans for a second level or basement. IT.Arch The student will demonstrate proper care and maintenance of CAD IT.Arch The student will demonstrate how to reproduce drawings (e.g., IT.Arch The student will read and interpret a variety of drawings. IT.Arch The student will demonstrate proficiency in creating two- dimensional CAD drawings IT.Arch The student will construct an architectural presentation drawing with site plan, floor plans, building elevations and wall sections. IT.Arch.06 Students will produce a set of elevation drawings of the exterior of their previously selected house. IT.Arch The student will demonstrate proper care and maintenance of CAD IT.Arch The student will demonstrate how to reproduce drawings (e.g., IT.Arch The student will read and interpret a variety of drawings. IT.Arch The student will demonstrate proficiency in creating two- dimensional CAD drawings IT.Arch The student will construct an architectural presentation drawing with site plan, floor plans, building elevations and wall sections. IT.Arch.07 Students will produce a plot plan (bird's eye view) of the lot and the way the house sets on it. IT.Arch The student will demonstrate proper care and maintenance of CAD IT.Arch The student will demonstrate how to reproduce drawings (e.g., IT.Arch The student will read and interpret a variety of drawings. IT.Arch The student will demonstrate proficiency in creating two- dimensional CAD drawings IT.Arch The student will construct an architectural presentation drawing with site plan, floor plans, building elevations and wall sections.
16 IT.Arch.08 Student will be able to produce a two-point perspective of the exterior of their previously selected house. When finished, the house will look as realistic as possible. IT.Arch The student will demonstrate proper care and maintenance of CAD IT.Arch The student will demonstrate how to reproduce drawings (e.g., IT.Arch The student will read and interpret a variety of drawings. IT.Arch The student will demonstrate proficiency in creating two- dimensional CAD drawings IT.Arch The student will construct an architectural presentation drawing with site plan, floor plans, building elevations and wall sections. IT.Arch.09 Students will select an interior room of their previously selected house and produce a one-point perspective of that room. After the room is drawn the student must render or shade it. IT.Arch The student will demonstrate proper care and maintenance of CAD IT.Arch The student will demonstrate how to reproduce drawings (e.g., IT.Arch The student will read and interpret a variety of drawings. IT.Arch The student will demonstrate proficiency in creating two- dimensional CAD drawings IT.Arch The student will construct an architectural presentation drawing with site plan, floor plans, building elevations and wall sections. IT.Arch Students will determine which careers related either directly or indirectly to drafting are of interest. IT.Arch Students will display knowledge of careers related to the drafting field.
17 Drafting 1 Drafting 1 students will utilize elementary drafting principles used by drafters everywhere. IT.D1.01 Students will determine which careers related either directly or indirectly to drafting are of interest to the student IT.D Students will display knowledge of careers related to the drafting field. IT.D1.02 Students will acquire the knowledge of proper use of pencil type, hardness, and techniques used for various lines in sketching IT.D The student will identify and draw the various line types. IT.D The student will demonstrate correct freehand lettering techniques. IT.D The student will prepare drawings/designs using appropriate media IT.D The student will produce sketches proportionately with good line quality. IT.D1.03 The student will explain and demonstrate how drafting instruments used in making a drawing. IT.D The student will use and maintain basic drafting equipment and machines. IT.D The student will identify and draw the various line types. IT.D The student will prepare drawings/designs using appropriate media. IT.D1.04 The student will demonstrate the proper use of drafting instruments are in the making of a one-view drawing. IT.D The students will demonstrate proper use and maintain basic drafting equipment and machines. IT.D The students will identify and draw the various line types. IT.D The students will produce drawings/designs using appropriate media. IT.D The students will read and interpret a variety of drawings. IT.D1.05 Students will produce isometric drawings and demonstrate how are the drawn. IT.D The students will demonstrate proper use and maintain basic drafting equipment and machines. IT.D The students will identify and draw the various line types. IT.D The student will demonstrate correct lettering techniques. IT.D The students will produce drawings/designs using appropriate media. IT.D The students will apply basic dimensioning techniques. IT.D The student will solve mathematical problems related to drafting.
18 IT.D The students will read and interpret a variety of drawings IT.D1.06 Students will produce orthographic drawings and how are the drawn. IT.D The students will produce orthographic views and transfer features. IT.D The students will apply basic dimensioning techniques. IT.D The students will solve mathematical problems related to drafting. IT.D The students will read and interpret a variety of drawings. IT.D1.07 Students will demonstrate the basic functions and commands of Auto-CAD IT.D The students will demonstrate basic CAD operations. IT.D The students will demonstrate proper care and maintenance of CAD equipment and software.
19 Introduction to CAD Introduction to CAD students, with the information learned in Drafting 1, will expand their knowledge of the drafting community through AutoCAD. IT.Cad.01 Students will acquire and exhibit the ability to use basic AutoCAD operation. IT.Cad The student will demonstrate basic CAD Operations. IT.Cad The student will demonstrate proper care and maintenance of CAD Equipment and Software. IT.Cad.02 Students will produce two-dimensional drawings using the basic functions of AutoCAD. IT.Cad The student will demonstrate basic CAD Operations. IT.Cad The student will demonstrate proper care and maintenance of CAD Equipment and software. IT.Cad The student will demonstrate proficiency in creating two- dimensional CAD drawings. IT.Cad.03 Students will produce 3-dimensional drawings using the 3D functions of AutoCAD. IT.Cad The student will demonstrate basic CAD Operations. IT.Cad The student will demonstrate proper care and maintenance of CAD Equipment and software. IT.Cad The student will demonstrate proficiency in creating three- dimensional CAD drawings.
20 Material Processes Material Processes students will explore the manufacturing and processing of a variety of materials. IT.MP.01 Students will acquire and exhibit the ability to use basic AutoCAD operation. IT.MP The student will demonstrate basic CAD Operations. IT.MP The student will demonstrate proper care and maintenance of CAD Equipment and software. IT.MP.02 Students will produce two-dimensional drawings using the basic functions of AutoCAD. IT.MP The student will demonstrate basic CAD Operations IT.MP The student will demonstrate proper care and maintenance of CAD Equipment and software. IT.MP The student will demonstrate proficiency in creating two- dimensional CAD drawings. IT.MP.03 Students will produce 3-dimensional drawings using the 3D functions of AutoCAD. IT.MP The student will demonstrate basic CAD Operations. IT.MP The student will demonstrate proper care and maintenance of CAD Equipment and software. IT.MP The student will demonstrate proficiency in creating three- dimensional CAD drawings.
21 Construction Technology I Construction Technology I students will apply the construction practices of safety, concrete, masonry, metals, woods, plastics, framing, thermal and moisture protection, doors and windows, finishes, electrical, plumbing, and HVAC through the construction of an out of classroom project. IT.CT.01 Students will demonstrate the basic safety and safety operating procedures necessary for a construction project. IT.CT Students will comply with shop and equipment safety rules. IT.CT Students will inspect workplaces for safe working environment and report unsafe conditions. IT.CT Students will correct safety hazards. IT.CT Students will clean and maintain work area and leave in safe condition. IT.CT Students will implement and comply with OSHA job site safety rules. IT.CT.02 Students will demonstrate the process and activities that must be completed to prepare a site for construction. IT.CT Students will establish elevation reference points from benchmark. IT.CT Students will establish footing grades. IT.CT Students will locate and square corners. IT.CT Students will install batter boards. IT.CT Students will set grade stakes. IT.CT Students will lay out a building using transit. IT.CT.03 Students will demonstrate the process and activities and apply methods that are used to complete the concrete for a construction project. IT.CT Students will explain all components of preparing foundations and footings. IT.CT Students will build forms for concrete including the erection of wall forms to include anchor bolts, bulkheads and key- way on appropriate footing. IT.CT Students will pour, screed and finish concrete. IT.CT Students will strip and clean forms. IT.CT Students will demonstrate appropriate handling and placing techniques. IT.CT.04 Students will construct and apply methods that are used to complete the carpentry for a construction project. IT.CT Students will identify parts of a stair and compute rise, run, and headroom.
22 IT.CT Students will rough in wall, roof, and floor systems. IT.CT Students will install prefab truss and rafter roof system. IT.CT Students will lay out structural members on center. IT.CT.05 Students will install the components that that are needed for thermal and moisture protection. IT.CT Students will identify the sidewall and ceiling insulation, vapor barriers, ventilation and air infiltration. IT.CT Students will identify types of roofing systems including common standards associated with roofing (i.e., flashing, penetrations, and installation). IT.CT Students will install insulation. IT.CT Students will observe appropriate waterproofing and drainage procedures. IT.CT.06 Students will apply the basic techniques for plumbing, electrical, and mechanical systems. IT.CT Students will splice wire correctly. IT.CT Students will wire and diagram the following switching arrangements: 3- way switching; single pole switching; and duplex receptacle. IT.CT Students will identify and explain ground fault protection. IT.CT Students will identify types and sizes of wire. IT.CT Students will observe the installation and connection of an electrical service entrance and breaker box. IT.CT Students will explain the difference between the components and operation of the following HVAC systems: steam, hot water, forced air and unit ventilation, air conditioning, and solar systems. IT.CT Students will explain the installation of water faucet and water closet replacement. IT.CT Students will identify the plumbing system in a structure (i.e., ventilation, sewer, potable water, etc.). IT.CT.07 Students will carry out the methods used to put the final touches on a construction project. IT.CT Students will observe appropriate mortar mixing techniques, layout, and bonding of masonry walls. IT.CT Students will measure and cut flashing, siding, soffit, and trim. IT.CT Students will miter and install molding trim. IT.CT Students will install cabinetry and casework. IT.CT Students will install pre- hung door and precased window. IT.CT Students will demonstrate appropriate techniques for installing and finishing drywall. IT.CT Students will identify various floor- covering options.
23 Wood Technology Wood Technology students will explore the basic concepts of Industrial Technology including woodworking machine safety and operation through the demonstration of skills acquired throughout the class. IT.WT.01 Students will apply the basic safety and operating procedures necessary for a construction project. IT.WT Students will comply with shop and equipment safety rules. IT.WT Students will inspect workplaces for safe working environment and report unsafe conditions. IT.WT Students will correct safety hazards. IT.WT Students will clean and maintain work area and leave in safe condition. IT.WT Students will implement and comply with OSHA job site safety rules. IT.WT.02 Students will apply the basic background knowledge required for entry into the construction industry. IT.WT Students will cut material to specified dimensions and shape. IT.WT Students will install and remove fasteners properly. IT.WT Students will measure and compute using fractions and decimals. IT.WT.03 Students will demonstrate the basic sequence of procedures necessary for a construction project. IT.WT Students will receive, inspect, inventory, stack, and properly store equipment, materials, and supplies on- site. IT.WT Students will interpret a materials list. IT.WT Students will compute the quantity of commonly used materials. IT.WT Students will identify parts and materials.
24 Cabinet Making Cabinet Making students will construct projects using advanced methods of designing, planning, jointing, cutting, and assembling furniture and cabinets. IT.CM.01 Students will apply the basic safety and operating procedures necessary for a construction project. IT.CM Comply with shop and equipment safety rules. IT.CM Inspect workplaces for safe working environment and report unsafe conditions. IT.CM Correct safety hazards. IT.CM Clean and maintain work area and leave in safe condition. IT.CM Implement and comply with OSHA job site safety rules. IT.CM.02 Students will apply the basic background knowledge required for entry into the construction industry. IT.CM Cut material to specified dimensions and shape. IT.CM Install and remove fasteners properly. IT.CM Measure and compute using fractions and decimals. IT.CM.03 Students will demonstrate the basic sequence of procedures necessary for a construction project. IT.CM Receive, inspect, inventory, stack, and properly store equipment, materials, and supplies on- site. IT.CM Interpret a materials list. IT.CM Compute the quantity of commonly used materials. IT.CM Identify parts and materials.
25 Construction Technology II Construction Technology II students will further their training of the trades and explore the management of a construction jobsite. IT.CT.01 Students will demonstrate the basic safety and safety operating procedures necessary for a construction project. IT.CT Students will comply with shop and equipment safety rules. IT.CT Students will inspect workplaces for safe working environment and report unsafe conditions. IT.CT Students will correct safety hazards. IT.CT Students will clean and maintain work area and leave in safe condition. IT.CT Students will implement and comply with OSHA job site safety rules. IT.CT.02 Students will demonstrate the process and activities that must be completed to prepare a site for construction. IT.CT Students will establish elevation reference points from benchmark. IT.CT Students will establish footing grades. IT.CT Students will locate and square corners. IT.CT Students will install batter boards. IT.CT Students will set grade stakes. IT.CT Students will lay out a building using transit. IT.CT.03 Students will demonstrate the process and activities and apply methods that are used to complete the concrete for a construction project. IT.CT Students will explain all components of preparing foundations and footings. IT.CT Students will build forms for concrete including the erection of wall forms to include anchor bolts, bulkheads and key- way on appropriate footing. IT.CT Students will pour, screed and finish concrete. IT.CT Students will strip and clean forms. IT.CT Students will demonstrate appropriate handling and placing techniques. IT.CT.04 Students will construct and apply methods that are used to complete the carpentry for a construction project. IT.CT Students will identify parts of a stair and compute rise, run, and headroom. IT.CT Students will rough in wall, roof, and floor systems. IT.CT Students will install prefab truss and rafter roof system. IT.CT Students will lay out structural members on center.
26 IT.CT.05 Students will install the components that that are needed for thermal and moisture protection. IT.CT Students will identify the sidewall and ceiling insulation, vapor barriers, ventilation and air infiltration. IT.CT Students will identify types of roofing systems including common standards associated with roofing (i.e., flashing, penetrations, and installation). IT.CT Students will install insulation. IT.CT Students will observe appropriate waterproofing and drainage procedures. IT.CT.06 Students will apply the basic techniques for plumbing, electrical, and mechanical systems. IT.CT Students will splice wire correctly. IT.CT Students will wire and diagram the following switching arrangements: 3- way switching; single pole switching; and duplex receptacle. IT.CT Students will identify and explain ground fault protection. IT.CT Students will identify types and sizes of wire. IT.CT Students will observe the installation and connection of an electrical service entrance and breaker box. IT.CT Students will explain the difference between the components and operation of the following HVAC systems: steam, hot water, forced air and unit ventilation, air conditioning, and solar systems. IT.CT Students will explain the installation of water faucet and water closet replacement. IT.CT Students will identify the plumbing system in a structure (i.e., ventilation, sewer, potable water, etc.). IT.CT.07 Students will carry out the methods used to put the final touches on a construction project. IT.CT Students will observe appropriate mortar mixing techniques, layout, and bonding of masonry walls. IT.CT Students will measure and cut flashing, siding, soffit, and trim. IT.CT Students will miter and install molding trim. IT.CT Students will install cabinetry and casework. IT.CT Students will install pre- hung door and precased window. IT.CT Students will demonstrate appropriate techniques for installing and finishing drywall. IT.CT Students will identify various floor- covering options.
27 Company Management Company Management students will explore the basic principles of manufacturing and apply knowledge to create a company to manufacture and market a product.
Grade Level Benchmarks and Components
Grade Level Benchmarks (GLB) describe the concepts and skills we want students to know and be able to demonstrate in each grade level and each course. Teachers will assess student academic performance
More informationCarpentry/Carpenter CIP Task Grid
1 Secondary Task List 100 SAFETY/OCCUPATIONAL ORIENTATION 101 Identify and follow all basic safety practices and procedures. 102 Identify and follow all lab safety practices and procedures. 103 Identify
More informationCore Curriculum Carpentry 1 Carpentry 2 Carpentry 3
A Correlation of Core Curriculum Carpentry 1 Carpentry 3 To the Carpentry II Course Standards and Objectives to the Content Standards Resource Title: Core Curriculum: Introductory Craft Skills, Fifth Edition
More informationContent Map For Career & Technology
Content Strand: Applied Academics CT-DD1-1 CT-DD2-1 CT-DD3-1 CT-DD4-1 Use math concepts in Use math concepts in Use math concepts in Use math concepts in design and engineering design and engineering design
More informationStrands & Standards CARPENTRY 2
Strands & Standards CARPENTRY 2 COURSE DESCRIPTION This is the second in a sequence of courses that prepares individuals to layout, fabricate, erect, install, and repair wooden structures and fixtures
More informationCarpentry. EXAM INFORMATION Items. Points. Prerequisites. Course Length. Career Cluster EXAM BLUEPRINT. 1- Materials, Fasteners & Adhesives 10%
EXAM INFORMATION Items 73 Points 73 Prerequisites NONE Course Length DESCRIPTION This is the first in a sequence of courses that prepares individuals to layout, fabricate, erect, install, and repair wooden
More informationARCHITECTURE CADD Course Syllabus
6111 E. Skelly Drive P. O. Box 477200 Tulsa, OK 74147-7200 ARCHITECTURE CADD Course Syllabus Course Number: TTC-0880 OHLAP Credit: Yes OCAS Code: 8903 Course Length: 120 Hours Career Cluster: Manufacturing
More informationExperienced Worker Assessment Blueprint Carpentry
Blueprint Carpentry Test Code: 0207 / Version: 01 Specific Competencies and Skills Tested in this Assessment: Hand Tools Use and maintain fastening and prying tools Use and maintain sawing and cutting
More informationAcademic Plan Building Construction 2
Academic Plan Building Construction 2 Orientation to the Trade PACING: 3 weeks Unit Number: 1 Construction lab/ shop rules. Safety Contract Tool usage procedures. 1. Describe the history of the carpentry
More informationArchitectural Drafting
Measuring What Matters in Job Ready Assessment Blueprint Architectural Drafting Test Code: 4004 / Version: 01 Copyright 2012 General Assessment Information Blueprint Contents General Assessment Information
More informationEntry Level Assessment Blueprint Carpentry
Entry Level Assessment Blueprint Test Code: 4115 / Version: 01 Specific Competencies and Skills Tested in this Assessment: Safety Demonstrate safe material handling practices Display comprehension of workplace/job-site
More informationEntry Level Assessment Blueprint Carpentry
Entry Level Assessment Blueprint Carpentry Test Code: 4215 / Version: 01 Specific Competencies and Skills Tested in this Assessment: Safety Demonstrate safe material handling practices Display comprehension
More informationWAYNESBORO AREA SCHOOL DISTRICT CURRICULUM INTRODUCTION TO ENGINEERING
UNIT: Classroom rules and procedures NO. OF DAYS: 2 KEY LEARNING(S): Expectations and classroom procedures UNIT : What are the expectations and classroom procedures in the CAD room 3.4.12.A3. Demonstrate
More informationClass Title Description Credit Hours Contact Hours Lecture Hours Lab Hours ESU NOTE
2 3 4 AIT 1010 Construction Measurements and Calculations Course covers fundamental measuring and calculation skills essential to the skilled craftsperson working in the construction industry. Provides
More informationFraming Tech 1
Western Technical College 31410366 Framing Tech 1 Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits 3.00 Total Hours 108.00 This course introduces the
More informationDesign Technology Architectural Design 2 The second in a sequence of courses that prepares individuals with knowledge of residential architectural
Design Technology Architectural Design 2 The second in a sequence of courses that prepares individuals with knowledge of residential architectural and related construction. This course includes instruction
More informationRelated Drafting. (Construction related trades)
(Construction related trades) I. Course Description Related Drafting This course is broken up into 36 weeks. The main goal of this course is to introduce construction related trades the necessary skills
More informationARCHITECTURAL DESIGN II (544)
DESCRIPTION The second in a series, Architectural Design II prepares students with knowledge of residential architectural and related construction. Topics include; building materials, building codes, typical
More informationPassaic County Technical Institute CARPENTRY II JANUARY 2004
Passaic County Technical Institute CARPENTRY II JANUARY 2004 CARPENTRY II I. DESCRIPTION Carpentry two is a full year course which is intended to introduce the student to the proper and safe use of materials,
More informationConstruction III Curriculum Maps
Curriculum Maps Unit 1: Shop Safety Unit 2: Shop Equipment and Tool Review Unit 3: Project I Unit 4: Building Plans and Materials Unit 5: Footings and Foundations Unit 6: Floor Framing Unit 7: Wall Framing
More informationTechnology Education Department
Department Technology Education The technology education curriculum is designed to provide a balanced mix of theoretical and practical knowledge with an abundant amount of hands-on activities included
More informationSafety (OSHA 10 hour)
Construction Technology Core and Sustainable Construction Subject Code: 178000 Students will learn principles in basic safety (10-hr OSHA), construction math, hand and power tool are and operation, blueprint
More informationCarpentry Level 1, 2014
A Correlation of Carpentry Level 1, Utah Core Curriculum for Resource Title: Carpentry Publisher: Pearson Education publishing as Prentice Hall ISBN: SE: 9780133403800 Media (text, software, internet,
More informationPassaic County Technical Institute CARPENTRY III JANUARY 2004
Passaic County Technical Institute CARPENTRY III JANUARY 2004 CARPENTRY II I. DESCRIPTION Carpentry three is a full year course will further develop skills established in the 9 th and 10 th grades. Emphasis
More informationJob Ready Assessment Blueprint. Carpentry. Test Code: 4215 / Version: 01. Copyright All Rights Reserved.
Job Ready Assessment Blueprint Carpentry Test Code: 4215 / Version: 01 Copyright 2017. All Rights Reserved. General Assessment Information Blueprint Contents General Assessment Information Written Assessment
More informationAssessment Blueprint
Assessment Blueprint Carpentry Basic 8326- Online Version 8327- Paper/Pencil Version Copyright 2009. All Rights Reserved. General Assessment Information Home Builders Institute Carpentry Basic General
More informationEntry Level Assessment Blueprint Architectural Drafting
Entry Level Assessment Blueprint Architectural Drafting Test Code: 4004 / Version: 01 Specific Competencies and Skills Tested in this Assessment: Preparing to Draw Identify drafting tools, materials, and
More informationStrengthened Technical-Vocational Education Program COURSE DESIGN
COURSE DESIGN COURSE TITLE : DRAFTING TECHNOLOGY NOMINAL DURATION : 1200 HOURS QUALIFICATION LEVEL : NC II COURSE DESCRIPTION : This course is designed to enhance the knowledge, skills, and positive attitudes
More informationReavis High School Curriculum Snapshot/Cover Page for Computer Aided Design (CAD)
Reavis High School Curriculum Snapshot/Cover Page for Computer Aided Design (CAD) Unit 1: Introduction In this unit, students will identify components of a Computer Aided Design (CAD) system and how to
More informationCOURSE OUTLINE. Course Number Course Title Credits. Co- or Pre-requisite BCT110 Construction Materials & Methods
COURSE OUTLINE Course Number Course Title Credits BCT101 Construction Graphics 3 Hours: 2 Lecture 2 Studio/Lab, Co- or Pre-requisite BCT110 Construction Materials & Methods Implementation sem/year Fall
More informationIntroduction to Drafting Design
Introduction to Drafting Design Unit: 1 Content Standard(s) and Orientation 1. Relate the importance of drafting design technology in today s technological work force. Learning Objective(s) and Essential
More informationPrintreading for Residential Construction
Printreading for Residential Construction Chapter 1 1. What are the five types of working drawings? Plot plans, floor plans, elevations, sections, and details 2. What information is typically available
More information& Carpentry. Building. Resources
& Carpentry Building Resources Carpentry Second Canadian Edition Floyd Vogt Michael Nauth 9780176502737 Welcome to the Second Canadian Edition of Carpentry. The 2010 National Building Code of Canada is
More informationBUILDING PLANS. BUILDING INSPECTIONS DEPARTMENT
BUILDING PLANS BUILDING INSPECTIONS DEPARTMENT 507-537-6773 www.ci.marshall.mn.us This handout is intended only as a guide to the subject matter covered herein and is based in part on the 2015 Minnesota
More informationTECHNICAL DESIGN I (540)
DESCRIPTION The first assessment in a series, Technical Design I prepares students to develop technical knowledge and skills required to plan and prepare scale pictorial interpretations of engineering
More informationDrafting/CAD. 234 Drafting/CAD. Faculty and Offices. Certificates and Degrees Awarded. Certificate of Achievement Requirements: Drafting/CAD
234 Drafting/CAD Drafting/CAD The 21st century is witnessing a rapid growth in science, engineering and technology. This will require society to read, write and draw the language of technology drafting.
More informationAdvanced Computer Aided Design COURSE OUTLINE
Advanced Computer Aided Design COURSE OUTLINE 1. Course Title: Advanced Computer Aided Design 2. CBEDS Title: Computer Aided Drafting/Design 3. CBEDS Number: 5705 4. Job Titles: Framers Construction Inspectors
More informationINDUSTRIAL TECHNOLOGY
INDUSTRIAL TECHNOLOGY INDUSTRIAL TECHNOLOGY COURSES CAN BE USED AS ELECTIVE CREDITS CONTENT MISSION STATEMENT: The content area of Industrial Technology education provides a foundation for all students
More informationQuestions. Paul Ross Wallach V7198. Published by Hearlihy P.O. Box 1747 Pittsburg, KS
Questions for Blueprint-Reading Exams Paul Ross Wallach Published by Hearlihy P.O. Box 1747 Pittsburg, KS 66762 866-622-1003 www.hearlihy.com 81861 V7198 Copyright 2007 by Hearlihy. Except for making transparencies
More informationTechnology Education Grades Drafting I
Technology Education Grades 9-12 Drafting I 46 Grade Level: 9, 10, 11, 12 Technology Education, Grades 9-12 Drafting I Prerequisite: None Drafting I is an elective course which provides students the opportunity
More informationTest Code: 8294 / Version 1
Pennsylvania Customized Assessment Blueprint Test Code: 8294 / Version 1 Copyright 2014. All Rights Reserved. General Assessment Information Blueprint Contents General Assessment Information Written Assessment
More informationARCHITECTURAL DESIGN (542)
DESCRIPTION This is the first assessment in a sequence, Architectural Design I prepares students with knowledge of residential architectural and related construction. Topics include; architectural blueprint
More informationUnified School District of De Pere Tech. Ed. And Engineering Intro to Construction
Tech. Ed. And Engineering Intro to Construction A. Students will understand that technology is an extension of human capability. B. Students will recognize that systems are made up of individual components
More informationDrafting/CAD. 230 Drafting/CAD. Faculty and Offices. Certificates and Degrees Awarded. Certificate of Achievement Requirements: Drafting/CAD
230 Drafting/CAD Drafting/CAD The 21st century is witnessing a rapid growth in science, engineering and technology. This will require society to read, write and draw the language of technology drafting.
More informationCredentials for Career Technical Education Teachers and/or Students
s for Career Technical Education Teachers and/or Students 2012-2013 Concentration - Automotive Technology Engine National Institute for Automotive Performance* Service Excellence () Brakes* Electrical/
More informationSections & Details VOCABULARY
1 Sections & Details VOCABULARY 1 ROOF FRAMING DETAIL RIDGE BOARD SHEATHING SHINGLES WEB FASCIA RAFTER (chord) SOFFIT SHEATHING STUD INSULATION DOUBLE TOP PLATE CEILING JOIST 2 FOUNDATION DETAIL STUD SHEATHING
More informationStrands & Standards CONSTRUCTION TRADES FOUNDATION
Strands & Standards CONSTRUCTION TRADES FOUNDATION COURSE DESCRIPTION A course that generally prepares individuals in the following areas: basic safety, introduction to blueprint reading, introduction
More informationBuilding/Property Maintenance CIP Task Grid Secondary Competency Task List
Secondary Task List 100 DEMONSTRATE SAFETY IN THE BUILDING AND PROPERTY MAINTENANCE PROGRAM 101 Demonstrate knowledge of general shop safety. 102 Wear appropriate personal protective clothing. 103 Wear
More informationBUILDING PLANS. BUILDING DEPARTMENT
BUILDING PLANS BUILDING DEPARTMENT 952-446-1660 www.cityofminnetrista.com This handout is intended only as a guide and is based in part on the 2015 Minnesota Residential Code, Minnetrista City ordinances,
More informationCOURSE OF STUDY UNIT PLANNING GUIDE ARCHITECTURE G RADE LEVEL: CREDITS CURT BANICKI 1 F ULL YEAR MICHAEL WEBER, ASST. PRINCIPAL JULY 2018
COURSE OF STUDY UNIT PLANNING GUIDE FOR: ARCHITECTURE G RADE LEVEL: 11 12 5 CREDITS CURT BANICKI 1 F ULL YEAR PREPARED BY: MICHAEL WEBER, ASST. PRINCIPAL ENGINEERING/TECHNOLOGY SUPERVISOR JULY 2018 DUMONT
More informationBTR 100. Blueprint Reading
BTR 100 Blueprint Reading Approved: December 3, 2010 EFFECTIVE DATE: Fall 2011 COURSE PACKAGE FORM Team Leader and Members Ken Kramer, Frank Port, Curtis Clough, Andra Goldberg Date of proposal to Curriculum
More informationCAD Mechanical Design I
EXAM INFORMATION Items 58 Points 85 Prerequisites NONE Course Length ONE SEMESTER Career Cluster ARCHITECTURE AND CONSTRUCTION MANUFACTURING SCIENCE, TECHNOLOGY, ENGINEERING AND MATHEMATICS Performance
More informationITT Technical Institute. DT1110 Introduction to Drafting and Design Technology Onsite and Online Course SYLLABUS
ITT Technical Institute DT1110 Introduction to Drafting and Design Technology Onsite and Online Course SYLLABUS Credit hours: 4.5 Contact/Instructional hours: 56 (34 Theory Hours, 22 Lab Hours) Prerequisite(s)
More informationConstruction Trades Foundation
PRECISION EXAMS Construction Trades Foundation EXAM INFORMATION Items 65 Points 82 Prerequisites NONE Grade Level 10-12 Course Length ONE YEAR DESCRIPTION This course will focus on the foundation of construction
More informationDrafting. Drafting and Design Technician
Drafting and Design Technician Program Description This program is designed to provide students with entry level skills in the fields of mechanical, electrical, civil and architectural drafting and/or
More informationComputer Aided Design I
Black Horse Pike Regional School District 580 Erial Road, Blackwood, NJ 08012 Computer Aided Design I COURSE OF STUDY Technology Department Written by: Ken Whalen, Steve Arena and Vince Mannino Date: May
More informationFlorida Department of Education CURRICULUM FRAMEWORK
Florida Department of Education CURRICULUM FRAMEWORK July 2001 Program Title: Occupational Area: Blueprint Reading and Estimation Industrial Education PSAV Program Numbers I469919 CIP Number 0646.999901
More informationRevised April Unit/Standard Number. Proficiency Level Achieved: (X) Indicates Competency Achieved to Industry Proficiency Level
Secondary Task List 100 DEMONSTRATE SAFETY IN THE BUILDING AND PROPERTY MAINTENANCE PROGRAM 101 Demonstrate knowledge of general shop safety. 102 Wear appropriate personal protective clothing. 103 Wear
More informationPROGRAM OUTLINE BASIC DRAFTING TECHNOLOGY
BASIC DRAFTING TECHNOLOGY The mission of the Basic Drafting Technology Program at Crowley's Ridge Technical Institute is to provide the training necessary for students to be competitive in the workforce
More informationWisconsin Technical College System. Curriculum Standards & Program Design Summary CARPENTRY APPRENTICE (ABC)
Program Information Program Curriculum Standards & Program Design Summary 50-410-9 CARPENTRY APPRENTICE (ABC) Carpenters make up the largest building trades occupation in the industry and those with all-around
More informationOFFICE OF CURRICULUM & INSTRUCTION DRAFTING I. Grades Credits: 5
OFFICE OF CURRICULUM & INSTRUCTION DRAFTING I Grades 9-12 Credits: 5 ABSTRACT Drafting I offers the student an excellant foundation in drafting with hands- on experience in the development of individual
More informationDRAFT MECHANICAL DRAWING
Industrial Technology History of Drafting 9-12 Curriculum Standard One: The student will understand, classify, and be familiar with historical events, from cave writings to computer aided drafting systems,
More informationIndustrial Technology Scope and Sequence Louisburg USD #416
Topic Flight Rocketry Computer graphics and digital video Technology (7) Apply principles of aerodynamics and lift to create and test a wing. Use a navigation ruler and map to determine the direction and
More informationContent Area: Mathematics Course: CAD Grade Level: R14 The Seven Cs of Learning. 2-3 weeks. 3-4 weeks. 3-4weeks
Content Area: Mathematics Course: CAD Grade Level: 10-12 R14 The Seven Cs of Learning Collaboration Character Communication Citizenship Critical Thinking Creativity Curiosity Unit Titles The development
More information1. Name the horizontal member that rests on the foundation wall to support other wood members.
Student Name: Teacher: Date: District: Rowan Assessment: 9_12 T and I IC62 - Drafting - Architr II Test 1 Description: Unit C - Floorplans - Test 3 (ALL) Form: 501 1. Name the horizontal member that rests
More informationCourse Title: Mechanical Drawing Topic/Concept: Views Of Objects Time Allotment: 3 6 Weeks Unit Sequence: 1 Major Concepts to be learned:
Course Title: Mechanical Drawing Topic/Concept: Views Of Objects Time Allotment: 3 6 Weeks Unit Sequence: 1 1. Sketching skills 2. Orthographic projection 3. Visualization of views 4. Location of lines
More informationHS Home Maintenance Technology Education
Course Description A study of repairs that are commonly undertaken by the average homeowner. Hands on learning experiences may include dry wall, ceramic tile, house wiring, plumbing repairs, basic automotive
More informationChapter 8. Technical Drawings
Chapter 8 Technical Drawing Technical Drawings Multiview drawings Also called three-view drawings Simple objects take three views Front, top, one side Title block Identifies who did the design Gives date,
More informationTotal Test Questions: 65 Levels: Grades Units of Credit: 1.0
DESCRIPTION This course will focus on the foundation of construction trades. Students will learn and practice basic safety skills. They will need to understand and demonstrate basic math skills. Students
More informationComputer Aided Drafting and Design Competence
POLYTECH High School Class of 2012 Student: Instructors: Carlton Norris, Robert Bogdziewicz Instructor Signature: Date: Student Signagure: Date: Competency Based Education objectives rating: 1= Was introduced
More informationSheet Metal Worker Level 2
Level 2 Unit: B1 Welding 2 (GMAW and SMAW) Level: Two Duration: 25 hours Theory: Practical: 5 hours 20 hours Overview: Upon completion of this unit of instruction the apprentice will demonstrate knowledge
More informationMaterial Description Qty Units Cost Total SQUARE FOOTAGE TOTAL Area 1692 sqft
Material Report for plan: Willowdale A Page 1 of 7 SQUARE FOOTAGE TOTAL Area 1692 sqft EXCAVATION & FOUNDATION EXCAVATION & BACKFILL Conc. Footing (volume) 5 m³ 122.50 612.50 Conc. Footing (length) 6"x20"
More informationIntroduction to Site Layout Annotated Instructor s Guide. Module PREREQUISITES MODULE OVERVIEW OBJECTIVES PERFORMANCE TASKS
Introduction to Site Layout Annotated Instructor s Guide Module 78101-04 MODULE OVERVIEW This module provides an overview of the site layout trade and related tasks. The use of the builder s level and
More informationEL DORADO UNION HIGH SCHOOL DISTRICT Educational Services. Course of Study Information Page
Course of Study Information Page Course Title: Engineering Design and Architecture I (#0517)(Formerly Drafting 1 #0510) Rationale: This course in Engineering Design will introduce students to the fundamentals
More informationTECHNICAL GUIDE BEONSTONE PANELIZED STONE SIDING
TECHNICAL GUIDE BEONSTONE PANELIZED STONE SIDING TABLE OF CONTENTS This installation guide provides detailed step-by-step instructions for do-it-yourself projects. We invite you to read it carefully and
More informationKankakee Community College
Kankakee Community College Course prefix and number: DRFT 2414 Course title: Architectural Drafting with Revit Credit hours: 4 Lecture hours: 2 Lab hours: 4 Semester: Spring 2013 Catalog description: Prerequisite:
More informationCOURSE TITLE: ENGINEERING DRAWING 2 GRADES LENGTH: FULL YEAR SCHOOLS: RUTHERFORD HIGH SCHOOL RUTHERFORD, NEW JERSEY DATE:
COURSE TITLE: ENGINEERING DRAWING 2 GRADES 10-12 LENGTH: FULL YEAR SCHOOLS: RUTHERFORD HIGH SCHOOL RUTHERFORD, NEW JERSEY DATE: SPRING 2015 Engineering Drawing 2-2 Rutherford High School Rutherford, NJ
More informationSTATEWIDE CAREER/TECHNICAL EDUCATION COURSE ARTICULATION REVIEW MINUTES
STATEWIDE CAREER/TECHNICAL EDUCATION COURSE ARTICULATION REVIEW MINUTES Articulation Agreement Identifier: CAR 111 & CAR 114 (2006-1) Identifier is the postsecondary course prefix followed by Plan-of-
More informationBAA ADVANCED JOINERY FRAMEWORK 12
BAA ADVANCED JOINERY FRAMEWORK 12 DISTRICT NAME: Coquitlam DISTRICT NUMBER: SD#43 DEVELOPED BY: Dave Jones DATE DEVELOPED: April 20, 2006 SCHOOL NAME: Dr. Charles Best PRINCIPAL S NAME: Brian Fichter BOARD/AUTHORITY
More informationPROGRAMMING SCHEMATIC DESIGN DESIGN DEVELOPMENT CONSTRUCTION DOCUMENTS. room) Scalable bubble diagrams schedules describing programmatic
GENERAL SITE PROGRAMMING SCHEMATIC DESIGN DESIGN DEVELOPMENT CONSTRUCTION DOCUMENTS Scope of work narrative Building code review Description of construction Documentation on drawings as List of applicable
More informationResidential Construction Student Work Book
Residential Construction Student Work Book Names: Contents Residential Construction Student Work Book... 1 Window and Door Framing... 4 Module Overview... 4 Theory of Wall Framing... 5 Labeling and Defining
More informationCONSTRUCTION / HOUSING
CONSTRUCTION / HOUSING - PRINCE EDWARD ISLAND APPLIED MATHEMATICS 80A Table of Contents Construction/ Housing Reading a Tape Measure (Imperial)... - Using a Carpenter s Square... -5 Checking for Squareness
More informationACT-IED-1. Students will identify the disciplines related to engineering drawing and design professions.
PROGRAM CONCENTRATION: CAREER PATHWAY: COURSE TITLE: Architecture, Construction, Communications & Transportation Engineering Drawing & Design Introduction to Engineering Drawing and Design Introduction
More informationJoshua Woodsman
CONSTRUCTION GUIDE of one of our design Please Note This electronic document is protected by the identifier against unauthorized dissemination on the Internet. Before building any structure make sure you
More informationDrafting & Design Technology
131 Location: Library Tower - 2nd Floor Program Information Every new structure or machine starts out as the idea of a designer or an engineer. It is only through the knowledge and ability of highly skilled
More informationCSI Section DMI Light Gage Structural Steel Framing Systems. Blocking Fire Rated Pre-cut (Proprietary) Furring Wall Preservative Treated
DMI Database CCF5IF9HGLPD-QB (4,88) $14,775.00 CSI Section 05400 DMI Light Gage Structural Steel Framing Systems Angle Framing Bridging Channel Flat Strapping Furring Clip Angle Soffit/Fascia/Deck Framing
More informationSheet Metal Worker A Guide to Course Content
Sheet Metal Worker A Guide to Course Content Sheet Metal Workers use metal of 10 gauge or lighter to make and repair products and buildings. Training Requirements: To graduate from each level of the apprenticeship
More informationDOCUMENT SUBMITTAL REQUIREMENTS FOR A NEW MULTI-FAMILY DWELLING
INFORMATION BULLETIN / GENERAL INFORMATION REFERENCE NO.: None DOCUMENT NO. P/GI 2014-007 Previously Issued As: P/GI 2011-007 Effective: 01-01-2014 Revised: DOCUMENT SUBMITTAL REQUIREMENTS FOR A NEW MULTI-FAMILY
More informationLESSON 1: UNDERSTANDING CONSTRUCTION DRAWINGS
LESSON 1: UNDERSTANDING CONSTRUCTION DRAWINGS INTRODUCTION In this lesson, you ll learn about the different types of drawings used in the construction industry, and how to read floor plans, section drawings,
More information1 Exam Prep Carpentry and Building Construction Manual, 2010 Edition Tabs and Highlights
1 Exam Prep Carpentry and Building Construction Manual, 2010 Edition Tabs and Highlights These 1 Exam Prep Tabs are based on the Carpentry and Building Construction Book, 2010 Edition. Each 1 Exam Prep
More informationCOURSE TITLE: Architectural Drafting LENGTH: Full Year Grades DEPARTMENT: Technology Education Barbara O Donnell, Supervisor SCHOOL:
COURSE TITLE: Architectural Drafting LENGTH: Full Year Grades 11-12 DEPARTMENT: Technology Education Barbara O Donnell, Supervisor SCHOOL: Rutherford High School DATE: Spring 2005 Architectural Drafting
More informationOrthographic Drawing (Architectural Board Drafting)
Design and Drafting Description In this activity, the teacher will introduce orthographic projection, in which a multi-view drawing shows how the sides of an object are related to each another. Students
More informationSingle-Family Dwelling Submittal Requirements
Single-Family Dwelling Submittal Requirements The purpose of this guideline is to assist our customers in preparing for plan submittal. The items listed must be included before your plans can be accepted
More informationHigh School PLTW Introduction to Engineering Design Curriculum
Grade 9th - 12th, 1 Credit Elective Course Prerequisites: Algebra 1A High School PLTW Introduction to Engineering Design Curriculum Course Description: Students use a problem-solving model to improve existing
More informationTechnical Drawing 101 with AutoCAD 2018
Technical Drawing 101 with AutoCAD 2018 A Multidisciplinary Guide to Drafting Theory and Practice with Video Instruction Douglas Smith Antonio Ramirez Ashleigh Fuller SDC PUBLICATIONS Better Textbooks.
More informationDrawing Standards & Conventions for IDD
Drawing Standards & Conventions for IDD This document consists of a set of standards that have been developed to maintain a consistency in Interior Decoration and Design students work. The standards are
More informationCommercial Systems
Western Technical College 31410360 Commercial Systems Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits 1.00 Total Hours 36.00 In this course, students
More informationCAREER PATHWAY CARPENTRY CIP Code Pennsylvania's Targeted Industry Cluster: Architecture & Construction
CAREER PATHWAY CARPENTRY CIP Code 46.0201 Pennsylvania's Targeted Industry Cluster: Architecture & Construction Potential Careers 47-2031 Carpenters 47-3012 Helpers - Carpenters National and State Occupational
More informationITT Technical Institute. CD111 Introduction to Design and Drafting Onsite and Online Course SYLLABUS
ITT Technical Institute CD111 Introduction to Design and Drafting Onsite and Online Course SYLLABUS Credit hours: 4 Contact/Instructional hours: 50 (30 Theory Hours, 20 Lab Hours) Prerequisite(s) and/or
More informationInstallation Instructions for Standard Lap and Self-Aligning Lap Siding
Installation Instructions for Standard Lap and Self-Aligning Lap Siding 7/16 in. Standard Laps Include: All Old Mill Widths, Cedar Shake Lap and Smooth Lap 1/2 in. Self-Aligning Include: 8 in. and 12 in.
More information