Series. 150,000 min -1 (0.5MPa) 25W. High Speed 150,000min -1 Suitable for Small Diameter Milling AIR TURBINE SPINDLE. Max. Max.
|
|
|
- Maud Barnett
- 6 years ago
- Views:
Transcription
1 AIR TURBINE SPINDLE Series Max. 150,000 min -1 High Speed Suitable for Small Diameter Milling Large Variety of Tapers Available SHANK M2040 (Straight), BT30 / 40 / 50 HSK E25 / 32 / 40 / 50 HSK A63 / F63 Air Turbine Air Turbine mechanism has extremely low heat generation. Only a minimal warm up time is required ex.1-2min. Collet Chuck Max. ø4.0mm P. 1
2 AIR TURBINE SPINDLE HTS Series Max. 25 W Negligible spindle expansion Air Turbine mechanism has extremely low heat generation. Only a minimal warm up time is required ex.1-2 min. Up to cutting tool R x 0.1 depth of cut is possible. Case Studies <Rough mill for deep cutting, High-speed feeding> F=2,000mm/min (Rough cutting) Rough Cutting Finishing Cutting NAK80 (HRC 40) R 0.2 x 2L Ball End Mill Ad 0.03 x Rd 0.04mm 2,000mm/min Ad 0.01 x Rd 0.01mm 1,500mm/min 4h 31min HTS1501S-BT40 Highly stable milling conditions are possible ever with very small diameter cutting tools Usable max. cutting tool diameter : Ball End Mill R0.5, Square End Mill ø1 Case Studies <High-speed rotation and feeding> F=2,250mm/min DC53 (HRC 60) R 0.1 x 0.5 cbn 2,250mm/min Spindle Runout : Collet Chuck : Max. ø4.0mm Collet Chuck CHA-4.0 OPTION Refer to P.13 Other collet sizes are available. HTS Series Connection Drawing Clean, lubricated, and regulated air is required for HTS Series spindles. Please refer to the diagram to the right for proper connections. AL-0304 incorporates a filter, regulator and lubricator to provide the appropriate air. Dramatically shorten mold cavity machining time Air Line Kit AL-0304 OPTION Refer to P.13 Caution Do not rotate the machining center's main spindle with the HTS1501 spindle installed. Case Studies <Rib processing> F=2,000mm/min [1] Cutting Depth [2] [3] NAK80 (HRC 40) Ad x Rd 0.01mm 3h 30min (42min / 1pc.) Compressor Sample No. [1] [2] [3] ø0.2 x 2 ø0.3 x 3 ø0.4 x 4 HTS Series Air Line Kit AL-0304 Cutting Depth Ad 0.003mm Ad 0.005mm Ad 0.007mm 2,000mm/min 29min. 50sec. 27min. 43sec. 26min. 22sec. P. 3 P. 4
3 Caution : Do not rotate the machining center's main spindle with the HTS1501 spindle installed. HTS1501S-BT30 1,030g HTS1501S-HSK E25 760g (48.4) BT30 No Model HTS1501S-BT (13) HSK E25 No Model HTS1501S-HSK E25 ø46 HTS1501S-BT40 1,700g HTS1501S-HSK E32 790g (65.4) BT40 No Model HTS1501S-BT (16) HSK E32 No Model HTS1501S-HSK E32 HTS1501S-BT50 4,500g HTS1501S-HSK E40 980g (101.8) BT50 No Model HTS1501S-BT50 () (93.5) (73.5) 20 HSK E40 No Model HTS1501S-HSK E40 ø100 P. 5 P. 6
4 Caution : Do not rotate the machining center's main spindle with the HTS1501 spindle installed. HTS1501S-HSK E50 1,070g HTS1501S-M2040 (Straight Type) 710g () (100.5) (75.5) 25 HSK E50 No Model HTS1501S-HSK E (40) No Model HTS1501S-M2040 ø HTS1501S-HSK A63 1,400g (32) HSK A63 No Model HTS1501S-HSK A63 HTS1501S-HSK F63 1,380g (25) HSK F63 No Model HTS1501S-HSK F63 P. 7 P. 8
5 AIR LINE KIT, PARTS Air Line Kit AL-0304 (For ø6mm, ø8mm Hose) PF1/ ø8 The AL-0304 provides simple, automatic conditioning of the air supplied to NAKANISHI air motors. The filter removes water and other contaminants. The regulator maintains to proper air pressure and the lubricator ensures proper oil flow to the motor and spindle. In high humidity areas it is recommended to use an air dryer between the compressor and AL Filter Mesh 0.3 µm No Model AL ø7 Air Filter Air Regulator Air Pressure Gauge Lubricator Air ON-OFF Valve Hose for Piping (K-275) : 2m Lubricating Oil (K-211) : 1pc. Reducer 70 Reducer (ø8 - ø6mm Adaptor) is provided. Parts ø7.4 Product No. Model Inside Diameter : ød Fit to CHA-2.35 ø CHA-3.0 ø CHA ø CHA-4.0 ø4.0 ø0.5, ø0.6, ø0.7, ø0.8, ø0.9 d Collet Chuck CHA Group ø CHA-[][] CHA-3.0AA ø3.0aa CHA-3.175AA CHA-4.0AA CHN-A 2159 CHN-AA AGM-01A ø1.1, ø1.2, ø1.3, ø1.4, ø1.7, ø1.8, ø1.9 ø2.1, ø2.2, ø2.3, ø2.4, ø2.6, ø2.7, ø2.8, ø2.9 ø3.1, ø3.2, ø3.3, ø3.4, ø3.6, ø3.7, ø3.8, ø3.9 ø1.0, ø1.5, ø2.0, ø2.5, ø3.5 ø1.6 ø3.175aa ø4.0aa Chuck Nut for Collet Chuck (CHA) Chuck Nut for Collet Chuck (CHA) Grindstone Axis Run-out Accuracy : Within 0.02 mm For Grindstone with ø5.0 mm I.D. HTS series SMS series High precision type SMS series HTS series SMS series : For right hand (cw) rotation only. P. 13 P. 14
E2000 Ultra-high-Speed & Super-Precision
E2 E2 UltrahighSpeed & SuperPrecision www.nakanishiinc.com NAKANISHI INC. 216 PRK333E Ver.2 '16.11.3.I Specifications and design are subject to change without notice. Headquarters Factory 7 Shimohinata,
SHOWA TOOL. GENERAL CATALOG SHOWA TOOL
SHOWA TOOL SHOWA TOOL GENERAL CATALOG www.showatool.com SHOWA TOOL SH INDEX A AS B ADJUST SCREW for MICRON CHUCK H series, M series BC SPARE BLADE CLAMP 67 BK BLADE (For Standard Head) 60 BKF BLADE (For
MF 1 MF 1 V MF 1 MF 1 V. Multipurpose Milling Machines. Most widely used milling machine type word-wide!
Multipurpose Milling Machines Most widely used milling machine type word-wide! with 3 axes position indicator head swivels through 3 axes swivel r + l ± 90 ilt forward + reverse ± 45 rotation on the column
3AFK 3AFK. For Aluminum Machining. 3-Flute End Mill for High Efficiency and Precision. Solid End Mill
Solid End Mill For Machining 3-Flute End Mill for High Efficiency and Precision High Efficiency with 3-Flutes. Excellent Precision Machining Stable Machining due to sharp edge for Anti-chattering Performance
DUGARD EAGLE 200HT / 200MC
DUGARD EAGLE 00HT / 00MC Slant Bed, High Precision CNC Lathes EAGLE 00HT 5 Slant Bed Heavy duty cast construction allowing optimum chip clearance Rigid, High Precision Spindle Unit Model Eagle 00HT The
DIN ISO 12164
It is the outstanding rigidity and accuracy of the NEW BABY CHUCK, used for holding the cutting tool, that produces high precision with less runout. Available in various sizes to meet specific production
KTM-16/20 TECHNICAL DATA
TECHNICAL DATA Table Diameter : 1,600mm Max. Turning Diameter : 2,000mm Max. Turning Height : 1,750mm Table Indexing Degree : 0.001mm CNC Controller : FANUC 18i-TB ** Bed The bed has symmetrical structure
VHF 3 VHF 3. Universal Milling Machine. Rigid Universal Milling Machine for drilling and milling, with large travels.
Universal Milling Machine Rigid Universal Milling Machine for drilling and milling, with large travels incl. 3-axis position indicator travel distances X axis 750 mm Y axis 280 mm Z axis 430 mm speed range
Precision Machining by Optical Image Type Tool Measurement System
10 Precision Machining by Optical Image Type Tool Measurement System YOSHIKATSU SATO *1 Due to the globalization of production bases and increasing demand for accuracy in recent years, machines and applications
TCF 160 / TCF 200 / TCF 224 / TCF 250 TCF 275 / TCF 300 HEAVY CENTRE LATHES
TCF 160 / TCF 200 / TCF 224 / TCF 250 TCF 275 / TCF 300 HEAVY CENTRE LATHES BASIC PARAMETERS 3-guideways bed Max. torque on spindle Nm Max. weight of workpiece between centre 30 tonnes Turning length 3,000
Features. High Positive Rake Angle. Multi-Side Grinding. High Speed, High Feed Rate. Economical
Engraving This is a revolutionary new concept of engraving tools with indexable carbide inserts. They offer you the ability to produce HIGH QUAITY ENGRAVING in most materials. The latest coated carbide
vario drive turn TU 1503V The new compact lathe with electronically adjustable speed. Perfect for the model maker
turn TU 1503V The new compact lathe with electronically adjustable speed. Perfect for the model maker DC motor Ribbed prism bed made of grey cast iron, inductively hardened and ground Hardened and ground
HM-32 - Mill Drill - Belt Drive (X) 540mm (Y) 190mm (Z) 410mm
HM-32 - Mill Drill - Belt Drive (X) 540mm (Y) 190mm (Z) 410mm On Sale Ex GST Inc GST $1,850.00 $1,690.00 $2,035.00 $1,859.00 ORDER CODE: M121 MODEL: Digital Readout: HM-32 Optional Type: Vertical Table
WF WF Tool Milling Machines. Milling Machines for Die Making with digital position indicator.
Tool Milling Machines Milling Machines for Die Making with digital position indicator automatic feeds on all 3 axes vertical head quill for drilling quill stroke 80 mm versatile for many applications for
HYDRAULIC CHUCKS. Quick facts about SPV Spintec s hydraulic chucks! Why should you use SPV Spintec s hydraulic chucks?
Quick facts about SPV Spintec s hydraulic chucks! Why should you use SPV Spintec s hydraulic chucks? Permits machining with much closer toleranses. Quicker and simpler tool changes. Runout accuracy All
Features. High Positive Rake Angle. Multi-Side Grinding. High Speed, High Feed Rate. Economical
Engraving This is a revolutionary new concept of engraving tools with indexable carbide inserts. They offer you the ability to produce HIGH QUAITY ENGRAVING in most materials. The latest coated carbide
Headquarters : 888 Homu Road, Hsinchuang, Shengang, Taichung, Taiwan E
YEONG CHIN MACHINERY INDUSTRIES CO., LTD Headquarters : 888 Homu Road, Hsinchuang, Shengang, Taichung, Taiwan sales@ GENERAL TEL : 886-4-2562-3211 SERVICE TEL : 886-4-2561-2965 FAX : 886-4-2562-6479 FAX
Product Overview. for perfect connections
Product Overview for perfect connections TOOL HOLDERS FOR DRILLING, TAPPING & REAMING Smart solutions for high quality clamping systems in tapping applications Tapping solution range from M1 M200 Quick
WF WF Tool Milling Machines. Milling Machines for Die Making with digital position indicator.
Tool Milling Machines Milling Machines for Die Making with digital position indicator automatic feeds on all 3 axes vertical head quill for drilling quill stroke 3" versatile for many applications for
Hawk Eye. engineered by SCHÜSSLER.
Hawk Eye R engineered by SHÜSSL www.k-schuessler.de The new precision collet chuck Hawk Eye R engineered by SHÜSSL We are proud to present our new precision collet chuck HAWK EYE. Highly accurate runout
DUGARD. DUGARD Machine. Dugard 200HT / 200MC Slant Bed, High Precision CNC Lathes. Machine Tools That Create Solutions Since 1939.
DUGARD Machine ools hat Create Solutions Since 1939 Dugard 00H / 00MC Slant Bed, High recision CNC Lathes DUGARD Machine ools www.dugard.com sales@dugard.com 0173 73 DUGARD 00H/00MC CNC Lathes Hydraulic
DUGARD. DUGARD Machine. Dugard 300 Slant Bed High Precision CNC Lathe. Machine Tools That Create Solutions Since Tools
DUGARD Machine Tools That Create Solutions Since 1939 Dugard 300 Slant Bed High Precision CNC Lathe DUGARD Machine Tools www.dugard.com sales@dugard.com 01273 732286 Outstanding features that guarantee
Vertical Machining Center V.Plus-550
Vertical Machining Center V.Plus-550 V.Plus-550 Pioneers of the Vertical MC Matsuura Pioneering Machine Tool Excellence Since 95 Pioneers in the development and manufacture of high quality CNC vertical
PRODUCT INFORMATION CBN-SXR CBN-LN-SXR CBN-SXB CBN-LN-SXB. CBN End Mill Series
PRODUCT INFORMATION CBN-LN-SXR CBN-LN-SXB CBN End Mill Series The helical flutes are changing the CBN end mills! Highly Appealing OSG CBN End Mill Series Are you bothered by these issues? The work material
DUGARD. Machine Tools Since Dugard 300 Slant Bed High Precision CNC Lathe.
DUGARD Machine Tools Since 1939 Dugard 300 Slant Bed High Precision CNC Lathe www.dugard.com Dugard 300 Series Outstanding features that guarantee faster, more accurate turning and lower production costs
HM-47 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column & Stand
HM-47 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column & Stand Ex GST Inc GST $3,790.00 $3,280.00 $4,358.50 $3,772.00 Special Ends 30/06/2018
HM-50 - Turret Milling Machine (X) 600mm (Y) 200mm (Z) 340mm Includes Digital Readout, Vice & Collet Chuck System
HM-50 - Turret Milling Machine (X) 600mm (Y) 200mm (Z) 340mm Includes Digital Readout, Vice & Collet Chuck System Ex GST Inc GST $5,500.00 $6,325.00 ORDER CODE: MODEL: Digital Readout: Type: Table Size
Dual Contact System. For High Speeds. Hydraulic Chuck. Runout Adjustable Chuck
Dual Contact System Dual Contact System Dual Contact System Features P1 BIG-PLUS Spindle System S P I N D L E S Y S T E M Dual contact spindle system BBT SHANK A1 BDV SHANK B2 HSK TOOLING SYSTEM Features
BDV/DV SHANK DUAL CONTACT. BDV/DV Shank
R DV/DV S P I N D E S Y S T E M DUA CONTACT DV/DV Shank DUA CONTACT DV/DV For High Speeds MEGA MICRO CHUCK PAT. Clamping diameter: ø0.45 - ø8.05 Ultra-slim design with world's smallest ø10 nut outer diameter.
Flexible tool overhang lengths possible by combining the modular extension arbor and shank with insert run-out adjustment mechanism
Sumi Easy insert replacement Characteristics Achieves efficiency through high speed, high feeding ability!! (v c =50 to 500m/min, f = 0.4 to 1.2mm/rev) Compatibility with a wide range of cutting conditions
HM-48 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column, Power Feed & Stand
HM-48 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column, Power Feed & Stand Ex GST Inc GST $4,350.00 $3,990.00 $4,785.00 $4,389.00 Special
HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column
HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column Ex GST Inc GST $2,470.00 $2,840.50 ORDER CODE: M123 MODEL: HM-46 Digital Readout: Optional Type: Vertical Table
Troubleshooting for Milling Chuck. Details of the trouble Cause Solution / Countermeasures
TROUBLESHOOTING 571 Troubleshooting Troubleshooting for Milling Chuck Details of the trouble Cause Solution / Countermeasures Tool cannot be held Tool shank diameter should be within h7 tolerance. Tool
DUGARD. Machine Tools Since Dugard HBM-4 / HBM-5 CNC Horizontal Boring Machines.
DUGARD Machine Tools Since 1939 Dugard HBM-4 / HBM-5 CNC Horizontal Boring Machines www.dugard.com Dugard HBM-4 Horizontal Borer Rotary Table Spindle (BT) Gear Box ATC 60 Tools (OPT) Heavy Loading capacity
Catalogue guide. MARIO PINTO SPA Strada delle Cacce Torino page 1 di 13
Catalogue guide MARIO PINTO SPA Strada delle Cacce 21-10135 Torino www.live-tooling.com www.mariopinto.it page 1 di 13 PRODUCTS MANUFACTURING PHILOSOPHY Our Live Tools are entirely developed, designed
VHF 2 VHF 2. Vertical Milling Machine
Vertical Milling Machine VHF - ideal series for mechanic workshops, training, single part and replacement part manufacturing, and prototyping including 3-axis position indicator travel x-axis 600 mm y-axis
3D SENSORS 2-in-1 3-AXIS EDGE FINDER & MEASURING INSTRUMENT.
3D SENSORS 2-in-1 3-AXIS EDGE FINDER & MEASURING INSTRUMENT www.haimer-usa.com HAIMER Sensors Benefits 1. No math needed Zero on the indicator = Zero on the machine control The sensor is pre-calibrated
Shrink Fit System... Thermal Induction
Shrink Fit System... Thermal Induction process-controlled heating no overheating on the tool quick and accurate shrinking, on and off for tools with carbide or steel shanks slim design of the chucks through
HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column
HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column Ex GST Inc GST $2,600.00 $2,860.00 ORDER CODE: M124 MODEL: HM-46 Digital Readout: Optional Type: Vertical Table
HM-54GV - Turret Milling Machine Inverter Variable Speed, Geared Head Horizontal & Vertical
HM-54GV - Turret Milling Machine Inverter Variable Speed, Geared Head Horizontal & Vertical Ex GST Inc GST (X) 600mm (Y) 200mm (Z) 340mm Includes Digital Readout, Vice & Collet Chuck System $7,250.00 ORDER
DUGARD. Machine Tools Since Dugard 52TT/52TTS Twin Spindle CNC Lathe Double Y axes, Servo Angular Driven Tool, Twin Built-In Spindles
DUGARD Machine Tools Since 1939 Double Y axes, Servo Angular Driven Tool, Twin Built-In Spindles www.dugard.com Designed for Precision Part Machining of; One-Hit Machining Automobile, motorcycle and bicycle
High Speed Air Turbine Handpiece
OPERATION MANUAL High Speed Air Turbine Handpiece Please read this Operation Manual carefully before use and file for future reference. Handpiece should not be used with friction grip burs exceeding 18.5
DUGARD. DUGARD Machine. Dugard 100 / 100P Slant Bed, High Precision CNC Lathes. Machine Tools That Create Solutions Since 1939.
DUGARD Machine Tools That Create Solutions Since 1939 / 100P Slant Bed, High Precision CNC Lathes DUGARD Machine Tools www.dugard.com sales@dugard.com 01273 73226 30m/min Rapids, X & Z Axes Linear Guideways
Cylindrical shank version Indexable Insert Endmill
Cylindrical shank version Indexable Endmill ø1 - ø 1 ød ST-FCM1-0 -FCM- 0 -FCM0-0 ST-FCM0-0 ST-FCM0- ST-FCM- -FCM- -FCM- 1 1 ød 1 0 0 1 17 0 0 0 70 1 ARG00 ARG00 ARG00 ARG0 ARG0 CATAOG No. =The ength of
High Performance Horizontal Machining Center
High Performance Horizontal Machining Center High Performance Horizontal Machining Center The Yeong Chin Horizontal machining centers are specially developed for high efficiency machining industries; automobile
Optimum tool for finish machining
Series Expansion Indexable Ball-nose End Mill for Finishing Indexable Corner Radius End Mill for Finishing 2011.2 Update B065E SRF/SRB SUF High accuracy indexable end mill Optimum tool for finish machining
EMCOMAT E-200 MC for the m cycle-controlled m
EMCOMAT E-200 MC for the m cycle-controlled m 1 HEADSTOCK Solid cast-iron construction Powerful Siemens drive system Short taper spindle nose with CAMLOCK adaptor Spindle bore diameter ø 53 (50) mm 2 2
MACHINE TOOL ACCESSORIES
VERTICAL 5-C COLLET VISE SERIES 344: VERTICAL 3-C COLLET VISE SERIES 344: : 2-1/2 x 7-3/4 Height: 4 Small movement of lever opens or closes collet. 2030000 CAM OPERATED 5-C HORIZONTAL/VERTICAL COLLET FIXTURE
HM-50 - Turret Milling Machine Package with Digital Readout & Tooling Accessories (X) 600mm (Y) 220mm (Z) 340mm
HM-50 - Turret Milling Machine Package with Digital Readout & Tooling Accessories (X) 600mm (Y) 220mm (Z) 340mm ORDER CODE: MODEL: Digital Readout: Type: Table Size (mm): Column Type: Spindle Taper - Vertical:
Multi-axis milling/turning system IMTA 320 T2 320 T3. Interaction Milling Turning Application
Multi-axis milling/turning system IMTA 320 T2 320 T3 Interaction Milling Turning Application T e c h n i c a l D a t a s h e e t The consistent 75 step bed design allows the near rectangular arrangement
DuraTurn Series. CNC Lathe. для получения подробной информации, пожалуйста, напишите нам на почту
DuraTurn 2030 DuraTurn 2050 DuraTurn 2550 CNC Lathe DuraTurn Series Durable Universal Reliable Affordable Accurate CNC Lathe with Excellent Operability and Machining Capability The DuraTurn series, which
Fixed Headstock Type CNC Automatic Lathe
Fixed Headstock Type CNC Automatic Lathe The BNA series packs sophisticated functions and high accuracy into a space-saving compact body. The BNA series aims to set the new standard for machines for cutting
4/5/6RFH 4/5/6RFH NEW. High Efficiency Roughing End Mill for Difficult-to-Cut Material
For Difficult-to-Cut Material High Efficiency Roughing End Mill 4/5/6RFH High Efficiency Roughing End Mill for Difficult-to-Cut Material 4/5/6RFH NEW High Efficiency Machining of Difficult-to-Cut Material
March weeks. surcharge for
March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not
SERIES AWEA MECHANTRONIC CO., LTD. High Rigidity Vertical Machining Centers AGENT ISO 9001 ISO 14001
AWEA MECHANTRONIC CO., LTD. HEADQUARTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu 30, Taiwan TEL : +886-3-88-191 FAX : +886-3-88-194 Website : www.awea.com CENTRAL TAIWAN SCIENCE
THE FUTURE RIGHT NOW PRECISION lathes, drilling- and milling machines
THE FUTURE RIGHT NOW PRECISION lathes, drilling- and milling machines turning milling drilling WABECO lathes > D2000 D2400 D3000 precise lead screw lathe in-house design and production the classics - tried
TECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION Bed type milling machine FS(Q) 100/125 INTELLECTUAL PROPERRY OF TOS KUŘIM - OS, a.s. page: 1 from 14 Article 1. GENERAL CHARACTERISTICS OF THE MILLING MACHINE 3 2. MACHINE DESCRIPTION
no mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable
.com More than a machine. Power your life. Precise Centre Metal Lathes. Advanced Technology, Complete
Precise Centre Metal Lathes. Advanced Technology, Complete Equipment, Easy-to-Operate. This kind of MM-D420X1000 universal metal lathe machine is a fantastic model for small to medium-size turning works
Th Series MULTI TASKING MACHINING CENTERS
Th Series MULTI TASKING MACHINING CENTERS MULTI TASKING 5-AXIS & UNIVERSAL MACHIN JUARISTI undergoing a deep development of their boring and milling centers, sets a new milestone with the manufacturing
Fixed Headstock Type CNC Automatic Lathe
Fixed Headstock Type CNC Automatic Lathe GTY Configured with two spindles, one turret, 2 x Y axes, gang tools and X3 axis to back spindle, the BNA42GTY can mount up to 45 tools. 3 tool simultaneous cutting
MH-28V - Mill Drill - Geared & Tilting Head (X) 430mm (Y) 220mm (Z) 355mm Electronic Variable Speeds & Dovetail Column
MH-28V - Mill Drill - Geared & Tilting Head (X) 430mm (Y) 220mm (Z) 355mm Electronic Variable Speeds & Dovetail Column Ex GST Inc GST $2,290.00 $2,519.00 ORDER CODE: MODEL: Digital Readout: Type: Table
CNC TURNING CENTRES B750 B1250
CNC TURNING CENTRES B750 B1250 Cutting edge technology and unequalled productivity. B750 2-3 Machine configurations The new B750/B1250 series represents the state of the art of multifunction turning centres.
ETM-949 MILL WITH 3-AXIS ACU-RITE MILLPWR G2 CNC
Elite offers World Class Mills fully loaded with features. When working on the design of the mills we focused our efforts on the most accurate spindle assembly to meet strict tolerance requirements. To
XF600/5A. HYUNDAI WIA Vertical Machining Center for Mold Machining
XF600/5A HYUNDAI WIA Vertical Machining Center for Mold Machining Technical Leader Hyundai WIA, as the machining tool maker with the tradition of Korea, developed 'Vertical Machining Center XF600/5A' under
VERTICAL MACHINING CENTER
MCH-630 MCV-7 VERTICAL MACHINING CENTER MCV-A MCV-60 MCV-BA MCV-10 MCV-1250 MCV-1450 MCV-1700 MCV- No. 3, Kung-Yeh Lane, Fengcheng Road, Nanshih Village, MCV-2600 Wufeng District, Taichung City, 41357,
.com More than a machine. Power your life. Precise Centre Metal Lathes. Advanced Technology, Complete
Precise Centre Metal Lathes. Advanced Technology, Complete Equipment, Easy-to-Operate. This kind of MM-D420X1500 universal metal lathe machine is a fantastic model for small to medium-size turning works
FBL-250Y/320Y/SY Series. CNC Turning-Milling Machines Linear/Box Way
FNLY/2Y/SY Series FBLY/2Y/SY Series CNC TurningMilling Machines Linear/Box Way Multifunctional Turning and Milling Excellence FNLY/2Y/SY Linear Way Series FBLY/2Y/SY Box Way Series CNC TurningMilling Machines
G G G 100M 480
www.dmgmori.com G 100 300 G 100 480 G 100M 480 Flat Tooling Turning Centers G 100 300 G 100 480 G 100M 480 Applications and Parts Highlights Machine and Technology Others Machine Specifications G 100 300
TOP WORK ISO 9001.CE UNIVERSAL CUTTER & TOOL GRINDER
TOP WORK ISO 9001.CE UNIVERSAL CUTTER Precise ball groove of conformation Inclination of Wheelhead The wheelhead can easily tilt up to ±15 degrees, with a 360-degrees swivel on the horizontal plane. The
5-Axis. Technology. Premium. 5 i. uts. End products without undercuts. Disk jig. 6P Glass multi jig. Premill multi jig. 8P Glass multi jig
Disk jig Possible to be equipped with a 98.5mm disk. Special-designed jig that can maintain high precision even after a long-time use due to its stable and durable features. 6P Glass multi jig 5Axis Machining
BF-20LV - Opti-Mill Drill - Geared & Tilting Head (X) 480mm (Y) 175mm (Z) 280mm Electronic Variable Speeds & Dovetail Column
BF-20LV - Opti-Mill Drill - Geared & Tilting Head (X) 480mm (Y) 175mm (Z) 280mm Electronic Variable Speeds & Dovetail Column Ex GST Inc GST $1,690.00 $1,859.00 ORDER CODE: MODEL: Digital Readout: Type:
PSK Tool Holders. Chapter 2 of the Product Catalogue 2010/2011 Precision Tools
PSK Tool Holders Chapter 2 of the Product Catalogue 2010/2011 Precision Tools PSK - Polygonal Kelch GmbH Tel.: +49 (0) 71 51 / 2 05 22-0 Fax: +49 (0) 71 51 / 2 05 22-11 info@kelchgmbh.de www.kelchgmbh.de
Model No: SM2502. Parts Information: Mini Drilling & Milling Machine
Page 1 of 6 Page 2 of 6 Page 3 of 6 1 SM2502.001 BASE 2 SM2502.002 X-AXIS FEEDING SCREW -- SM2502.002-1 KEY 4x16 4 SM2502.004 DIAL 5 SM2502.005 HAND WHEEL 6 SN8.S STEEL NUT M8 ZINC DIN934 (SINGLE) 7 SM2502.007
Indexable Engraving 45 / 60 A Revolutionary New Concept Engraving Tools with Indexable Carbide Inserts THE ACCURATE & ADVANTAGED SOLUTION www.jic-tools.com.tw 2011-06 1 indexable engraving Tool Our innovative
AIM AXIS ALUMINIUM PROFILE PROCESSING CENTER
AIM 4410 4-AXIS ALUMINIUM PROFILE PROCESSING CENTER Page 1/ 20 CONTENTS 1. OVERVIEW 4 2. TECHNICAL INFORMATION 4 2.1 GENERAL FEATURES 4 2.2 TECNİCAL FEATURES.. 5 3. FEATURES OF PROCESSING CENTER.. 7 4.
Drilling and Tapping. A Buyers Guide.
Drilling and Tapping A Buyers Guide www.miragemachines.com About Mirage Machines Mirage portable machine tools optimise the performance of on-site assets by achieving operational excellence, maximising
MCG-5X 5-axes Gantry Type Machining Center
TM TM MCG-5X 5-axes Gantry Type Machining Center BUFFALO MACHINERY CO., LTD. 56, Lane 318, Der Sheng Road, Ta Ya, Taichung City, Taiwan, R.O.C. P.O. Box 32, Ta Ya, Taichung City, Taiwan R.O.C. Tel: 886-4-25
In hall 4, stand A42, you can experience Intelligence in Production. The following trade show highlights can be seen at EMO:
Guhring at EMO 2013 Intelligence in Production with precision tools from Guhring In the spirit of the motto of this year s EMO, from 16th to 21th September in Hanover, Guhring is introducing trendsetting
Optical Measurement P-1
Optical Measurement P-1 FAST ROUND PART INSPECTION The whole TESA-Scan product line belongs to the range of dedicated non-contact opto-electronic measuring centres that provide Users with a complete solution
KB 2100 KB Bed-Type Milling Machine. Large machine bed, wide column, plus high intrinsic weight
Bed-Type Milling Machine Large machine bed, wide column, plus high intrinsic weight very long table travel (1,500 mm) and large table setup area travel (X/Y/Z) 1500 x 670 x 700 mm spindle speed (12) 40-1600
CNC LATHE...P1~P6 CNC MILL... P7~P12 CNC ENGRAVING MACHINE...P13 MACHINING CENTER...P14~P16
With twenty years experiences in manufacturing & exporting machine and tools, we have enjoyed considerable good reputation from our customers over the world because of the high quality and first-class
Please be sure to read this manual before using the product.
ANGLE HEAD UNIVERSAL TYPE AGU30 OPERATION MANUAL Please be sure to read this manual before using the product. Consult the separate operation manual for Angle Head also regarding the general handling of
Transfer Technologies
Transfer Technologies Company -WG was established in 1945 -State of the art 10,000 sq. meter manufacturing facility located in Annecy France -155 employees -The first transfer machine was built in 1971
Technical data P.155. Cutting data P.160 A63-SLK12-75 CF N : 16000min -1 F : 3200 mm V : 301m f : 0.1mm/flute R3 Carbide ball endmill 2flutes
REFERENCE Shrink-fitting quill for grinding Technical data P.155 Maintenance P.154 P.156 Safety mark A short insertion length may cause the holder to be damaged when the cutter is inserted into it. Always
2-Spindle Horizontal CNC lathes
2-Spindle Horizontal CNC lathes 2-Spindle Horizontal CNC lathes 2SP series machines are true 2-spindle lathes that boast space savings and high productivity Max turning diameter length: ø0 0 Max turning
HIGH SPEED SPINDLES OIL TURBINE DRIVEN
HIGH SPEED SPINDLES OIL TURBINE DRIVEN be driven. 2 The Toodle is a new, high speed, turbine-driven spindle. It costs a fraction of competing spindle systems... The Toodle may be driven by through-coolant,
Machinist s Guide to Toolholder Maintenance
Machinist s Guide to Toolholder Maintenance For Collet & Nut Style Toolholders General Overview Modern CNC machines feature high-capacity tool changers that automatically swap toolholders in and out of
High Performance Heavy Duty Lathe
High Performance Heavy Duty Lathe TC-46M series is the most powerful and rigid CNC lathe in its class. Designed with the latest technology and excellent equipment for highest material removal rate and
The enriched system configuration designed based on the loader head accommodates a wide range of automation needs.
CNC Lathe These are high-precision chucking machines equipped with a general-purpose in-machine loader head. The loading time is shortened substantially through coordinated operation of the loader head
CHUNG HSIWH INDUSTRIAL CO.,LTD
CHUNG HSIWH INDUSTRIAL CO.,LTD CH-VMC50&60 Vertical Machining Center CNC milling machines are designed with precision, smooth, high speed and high efficiency in mind. The series of CNC milling machine
Double Spindle Double Turret Multi-Tasking Turning Center DT42 DT52. Turning Precision Into Perfection
Double Spindle Double Turret MultiTasking Turning Center Turning Precision Into Perfection Machine Highlights Front Machining VDI 3 12Stations Up to 24 tools 7.5/11 Spindle Power D 55 Through Hole C Back
Vertical and horizontal Turning/Grinding Centers
Vertical and horizontal Turning/Grinding Centers INDEX Turning/Grinding Centers Turning and grinding of course with INDEX The INDEX Turning/Grinding Centers combine the advantages of turning and grinding
HAFCO METALMASTER HM-50. Turret Milling Machine. (X) 600mm (Y) 200mm (Z) 340mm. Product Brochure
Product Brochure M160D HAFCO METALMASTER HM-50 Turret Milling Machine (X) 600mm (Y) 200mm (Z) 340mm Page 1 of 5 Specifications & Prices are subject to change without notification - 2018-11-02 M160D.pdf
AIM AXIS ALUMINIUM PROFILE PROCESSING CENTER
AIM 7510 5-AXIS ALUMINIUM PROFILE PROCESSING CENTER Page 1/ CONTENT 1. OVERVIEW 4 2. TECHNICAL INFORMATION 4 2.1 GENERAL FEATURES 4 2.2 TECNİCAL FEATURES.. 5 3. FEATURES OF PROCESSING CENTER.. 7 4. MAIN
BNA-42MSY2. Fixed Headstock Type Automatic CNC Lathe BNA
BNA-42MSY2 Fixed Headstock Type Automatic CNC Lathe BNA BNA- 42MSY2 Configured with two spindles and one turret and equipped with a Y axis and X2 axis, the BNA-42MSY2 is able to handle complex machining,
Fixed Headstock Type CNC Automatic Lathe
Fixed Headstock Type CNC Automatic Lathe MSY The BNE series is renowned for its high rigidity, heavy cutting capability and outstanding precision. The new MSY model extends the ability of the BNE series
Tooltech Precision Reamers are designed to meet hole geometry requirements in the complex and demanding machining environment of today s manufacturing
BLADED REAMERS Tooltech Precision Reamers are designed to meet hole geometry requirements in the complex and demanding machining environment of today s manufacturing industry. The innovative design of
PIONEER TOOL HOLDING SOLUTIONS
PIONEER N.A., INC. PIONEER TOO HODING SOUTIONS 2018 CATAOG www.pioneerna.com PIONEER DUA CONTACT What is Dual Contact Dual Contact spindle gageline is ground to a controlled dimension to the taper of the
BNBX Type BNBX L103. Small Hole Boring Bars SUMIBORON
Small ole BNBX Type BNBX Boring & Facing Brazed 3 Newly developed high rigidity slit-clamping system, excellent for small hole boring Maximum overhang of /D=5 possible. Minimal bar deformation produces