Hawk Eye. engineered by SCHÜSSLER.

Transcription

1 Hawk Eye R engineered by SHÜSSL

2 The new precision collet chuck Hawk Eye R engineered by SHÜSSL We are proud to present our new precision collet chuck HAWK EYE. Highly accurate runout quality additional with high clamping forces allow a high efficient cutting process. Thereby you can use the full potential of your machine and cutting tools. Hawk Eye your benefits in focus R The deep-seated collet inside the chuck guarantees: runout of cutting tool <= 3µ at 2,5 x > runout of cutting tool <= 3µ at 2,5 x > maximum radial rigidity > more contact in the chuck, for higher clamping forces For comparison a standard collet chuck: in use of original SHÜSSL collets. Fine pitch thread for maximum clamping force eep seat of the collet inside: Enforced body for better stability and higher radial rigidity Ball bearing clamping nut lamping ring with special treated surface, for highest clamping forces

3 Precision collet chuck Hawk Eye, HSK - G 2,5 at.000 min gmm HSK A lamping Range Precision collet chuck Hawk Eye, HSK - G 2,5 at.000 min gmm HSK A 85 lamping Range Precision collet chuck Hawk Eye, SK Form A/B - G 2,5 at.000 min gmm SK A lamping Range The chuck can only clamp the nominal diameter of the collet. Scope of delivery: including clamping nut.

4 Precision collet chuck Hawk Eye, SK Form A/B - G 2,5 at.000 min gmm SK A lamping Range Precision collet chuck Hawk Eye, BT A/B - G 2,5 at.000 min gmm BT A lamping Range Precision collet chuck Hawk Eye, BT A/B - G 2,5 at.000 min gmm BT A lamping Range The chuck can only clamp the nominal diameter of the collet. Scope of delivery: including clamping nut.

5 -collets, repeatable accuracy of collet 5 µ NEW: orrosion-resistant! High precision design with concentricity and repeat accuracy of 5 µ. All lengthwise edges deburred and rounded additionally. This protects the inner cone of the chuck and provides consistently high concentricity. Increased holding forces and rigidity by super-finish-version. 24-xxx 24-3xxx 24-4xxx 24-5xxx 6 iam.,0-2,5 3,0-0,0,0-2,5 3,0-6,0 2,0-2,5 3,0-20,0 4,0-26,0 increasing 0,5 0,5 0,5 Please complete the item no. with the respective diameter of the collet, i.e. 6 with Ø 2,5 = collets, repeatable accuracy of collet 2 µ NEW: orrosion-resistant! Ultra high precision design with concentricity and repeat accuracy of 2 µ. All lengthwise edges deburred and rounded additionally. This protects the inner cone of the chuck and provides consistently high concentricity. Increased holding forces and rigidity by super-finish-version. 3-xxx 3-3xxx 3-4xxx 3-5xxx 6 iam.,0 2,0 3,0-0,0,0 2,0 3,0-6,0 2,0 3,0-20,0 4,0-26,0 increasing Please complete the item no. with the respective diameter of the collet, i.e. 6 with Ø 6,0 = Wrench Wrench for torque spanner

6 BRILLIANT PFORMANE FROM BOELSHAUSEN For over years, Schüssler has been manufacturing tool holders from a single location Bodelshausen. Today it is one of the leading manufactures. Founded by Karl Schüssler in 9, right from the beginning, the company began producing tool holders. Our quality features are way beyond the requirement of standard. Our experienced sales staff provide friendly and competent consulting services for all our products. OUR PROUT RANGE (EXPT) ollet chucks, and»mini«shrink fit holder End mill holder weldon Tool holders with coolant for»ool Tool«tool Shell mill holder, and many more All tool holders are available in all standard taper shanks, such as: HSK-/// Form A and E SK and IN 6987 Form A/B MAS BT 30 // Polygon shaft»orum«4/5/6/8 All types of tool holder are available in various lengths as standard - and fine balanced to G2,5 at.000 min or max. unbalance <= gmm. Karl Schüssler GmbH & o. KG Bahnhofstraße Bodelshausen Phone / Fax /