BAKER DIAL GAUGES & INSTRUMENTS
|
|
- Elfrieda Baker
- 6 years ago
- Views:
Transcription
1 BAKER DIAL GAUGES & INSTRUMENTS PLUNGER TYPE DIAL GAUGES (MODEL 40) TYPE READING RANGE GRADUATION D K mm 5.0 mm D K mm 5.0 mm D K D K PLUNGER TYPE DIAL GAUGES (MODEL 56) D KZ 0.01 mm 0.8 mm D KO mm 10.0 mm D KO mm 10.0 mm D KO mm 5.0 mm D KO mm 5.0 mm D KO5 0.1 mm 10.0 mm D KO6 0.1 mm 25.0 mm D KO mm 25.0 mm D KO mm 2.0 mm D K mm 2.0 mm D K mm 5.0 mm D K mm 5.0 mm D K mm 12.0 mm D K mm 12.0 mm D K mm 1.0 mm D KY D K D K D K D K D K D K D K D K D K PLUNGER TYPE DIAL GAUGES (MODEL 88) D K mm 50.0 mm D K
2 PLUNGER TYPE DIAL GAUGES (MODEL 105) D K mm 2.0 mm DIAL BORE GAUGES Range mm (0.4" - 0.7") TYPE READING BORE DEPTH GRADUATION D J mm 100 MM D J RANGE mm ( 0.7" - 2" ) D K mm 150 mm D K mm 150 mm D K D K RANGE mm ( 2" - 6" ) D K mm 250 mm D K mm 250 mm D K D K DIAL THICKNESS GAUGES K130 SERIES (THROAT DEPTH 30 mm) TYPE READING RANGE GRADUATION D K130/0 0.1 mm 10.0 mm D K130/ mm 10.0 mm D K130/ mm 2.0 mm D K130/ mm 5.0 mm D K130/ mm D K130/ D K130/ K142 SERIES (THROAT DEPTH 100 mm) D K142/0 0.1 mm 10.0 mm D K142/ mm 10.0 mm D K142/ K138 SERIES (PUSH DOWN TYPE) (THROAT DEPTH 50 mm) D K138/0 0.1 mm 25.0 mm D K138/ mm 10.0 mm D K138/
3 K138 SERIES (THROAT DEPTH 50 mm) D K138/0L 0.1 mm 25.0 mm D K138A/3L 0.01 mm 25.0 mm D K138A/1L K145 SERIES (THROAT DEPTH 200 mm) D K145/0 0.1 mm 10.0 mm D K145/ mm 10.0 mm D K145/ K150 SERIES (THROAT DEPTH 200 mm) D K150/0L 0.1 mm 25.0 mm D K150/3L 0.01 mm 25.0 mm D K150/1L DIGITAL THICKNESS GAUGES 130 series (Throat Dept : 30 mm ) D TYPE READING RANGE GRADUATION K130/D mm/ D D D D K142/D K138/D K145 /D K150/D 142 Series ( Throat Depth : 30 mm ) 138 Series ( Throat Dept : 50 mm ) Series ( Throat Dept : 200 mm ) Series ( Throat Dept : 200 mm )
4 130 series (Throat Dept : 30 mm ) DIGITAL THICKNESS GAUGES COAD D TYPE READING RANGE GRADUATION K130/D mm/ Series ( Throat Depth : 30 mm ) D K142/D 138 Series ( Throat Dept : 50 mm ) D K138/D 145 Series ( Throat Dept : 200 mm ) D K145 /D 150 Series ( Throat Dept : 200 mm ) D K150/D DIAL DEPTH GAUGES D K mm 0.1 mm mm D K158/ mm mm D K158/ DIAL GAUGES & INSTRUMENTS BAKER LEVER TYPE DIAL GAUGES (MODEL 29) TYPE READING BORE DEPTH GRADUATION D mm 0.8 mm D mm 0.2 mm D D Supplied With 2mm Ø T.C. Ball Stylus fitted to the gauge and 1mm Ø. T.C. Ball Stylus, Height Gauge Adaptor, O 4mm & 8mm Dovetail Spigot Assembly and Universal Clamp as standard accessories in a box. D A 0.01 mm 0.8 mm D A mm 0.2 mm D A D A Supplied With 2mm Ø T.C. Ball Stylus & 8mm Dovetail Spigot Assembly fitted to the gauge.
5 LEVER TYPE DIAL GAUGES WITH LONG STYLUS (MODEL 29) D L 0.01 mm 0.8 mm D L , Supplied With 2mm Ø T.C. Ball Stylus fitted to the gauge and 1mm Ø. T.C. Ball Stylus, Height Gauge Adaptor, O 4mm & 8mm Dovetail Spigot Assembly and Universal Clamp as standard accessories in a box. D AL 0.01 mm 0.8 mm , AL , LEVER TYPE DIAL GAUGES (MODEL 38) D mm 0.8 mm D mm 0.2 mm D D Supplied With 2mm Ø T.C. Ball Stylus fitted to the gauge and 1mm Ø. T.C. Ball Stylus, Height Gauge Adaptor, O 4mm & 8mm DovetailSpigot Assembly and Universal Clamp as standard accessories in a box. D A 0.01 mm 0.8 mm , D A mm 0.2 mm , D A , D A , BACK PLUNGER DIAL GAUGES (MODEL 38) D FO mm 2.0 mm D FO mm 2.0 mm D F D F UNIVERSAL TEST SETS D UI mm 2.0 mm D UI mm 2.0 mm D UI D UI DIGITAL DIAL GAUGES ( PLUNGER TYPE ) E BAKER IP65 MINI Water Resistant Plunger Type Digital Dial Gauge, Type MD001 with metric & capability & 232 data output. 19, Reading : mm / Range : E BAKER RS232 Cable + Power supply for MINI Plunger Type Dial Gauges 5,775.00
6 E NEW IP67 DIGITAL DIAL GAUGES ( PLUNGER TYPE ) BAKER Water Resistant Digital Dial Gauge, Type W1 with metric & capabilities & RS232 data output, confirming to IP67. 15, Reading : mm / Range : E BAKER Water Resistant Digital Dial Gauge, Type W2 with metric & capability & RS232 data output, conforming to IP67. 17, Reading : mm / Range : E BAKER Proximity Cable with for RS232 interface suitable for BAKER W1 & W2 Digital Dial Gauges. 4, E BAKER Proximity Cable with for USB interface suitable for BAKER W1 & W2 Digital Dial Gauges. 4, TYRE TREAD DEPTH GAUGES TYPE READING RANGE GRADUATION D TTG mm 8.0 mm 1, D TTG , CRANKSHAFT GAUGES D CS mm mm , D CS , D PMI-3 PRECISION MEASURIN INSTRUMENTS SET Set consisting of BAKER Digital Caliper SDN10, Dial Gauge KO2 & Micrometer MM- 25 6,290.00
7 OUTER DIAMETER CHECKING GAUGES D OD mm mm 6, D OD mm mm 6, D OD mm mm 6, D OD mm mm 6, D OD mm mm 6, D OD mm mm 6, D OD mm mm 6, D OD mm mm 6, D OD mm mm 6, D OD mm mm 6, D OD mm mm 6, BALL DIAMETER CHECKING GAUGES D BD mm 1-10 mm Price on Request D BD mm mm 4, D BD mm mm 4, D BD mm mm 4, D BD mm mm 4, D BD mm mm 4, D BD mm mm 4, D BD mm mm 4, D BD mm mm 4, D BD mm mm 4, D BD mm mm 4, Baker plunger dial gauges. Baker lever dial gauge standard, with long stylus, with large dial gauges. Baker back plunger dial gauges. Baker digimatic calipers. Baker dial depth gauges. Tire depth gauge. Dial bore gauges. Dial thickness gauges. Digimatic dial thickness gauges. Price list valid from Authorized distributors. Authorized dealers. Trade Combine deals in dial gauges, dial calipers, vernier calipers, tire depth gauges, digimatic calipers, dial bore gauges, back plunger dial gauges, etc. Ask for trade discounts for bulk quantities. us on visit us on
These thickness gauges are especially handy for measuring thickness of small
Thickness s mm type These thickness gauges are especially handy for measuring thickness of small parts, metal, rubber, vinyl, paper, foil and other sheet material. The objects to be measured is clamped
More informationDIVIDING EQUIPMENT DIVIDING EQUIPMENT
64 DIVIDING EQUIPMENT 65 D-01 UNIVERSAL TILTING ROTARY TABLE Model: HUT-300 QUICK MANUAL INDEXING. Suitable for milling, boring, shaping, drilling, dividing, setting angles and for circular cutting. Tilting
More informationDigital scales description S_System LIN Precision measuring set for new development and retro-fitting Easy to integrate in your projects Small overall
Digital scales description S_System LIN Precision measuring set for new development and retro-fitting Easy to integrate in your projects Small overall dimensions USB or RS-232 connectivity Software development
More informationBevels & Gauges. Measuring & Marking T-SLIDE BEVEL PLASTIC HANDLE T-SLIDE BEVEL - ABS HANDLE SLIDING BEVEL INDICATOR BEVEL PROTRACTOR
T-SLIDE BEVEL - ABS HANDLE For determining existing angles or transferring angles onto a workpiece Slotted hardened steel blade allows the user to accommodate a wide range of different size work pieces
More informationElectronic Indicators. Advanced Model
Electronic Indicators Advanced Model Meets ASME B89.1.10M-2001 standards 320 degree rotating display digital/analog Stem diameter: 3/8 Button functions: tolerance GO and NOGO display, data preset, measuring
More informationGokul Traders.
+91-8048764826 Gokul Traders https://www.indiamart.com/gokultraders/ We are one of the leading authorized dealers of industrial mass production tools like dial gauges, surface plates, thread gauges, surface
More informationABSOLUTE Digimatic Indicator Page 250. Dial Indicator Page 262. Accessories for Indicator Page 280. Dial Test Indicator Page 289
Indicators BSOUTE Digimatic Indicator Page 250 Dial Indicator Page 262 ccessories for Indicator Page 280 Dial Test Indicator Page 289 ccessories for Dial Test Indicators Page 297 Thickness Gauge, Depth
More informationuarter Flyer Prices in effect: January 5 - March 31, 2015 or as otherwise noted while quantities last. Some items may not be exactly as shown.
Distributed by 1 ST uarter Flyer Prices in effect: January 5 - March 31, 2015 or as otherwise noted while quantities last. Some items may not be exactly as shown. Mitutoyo manufacturing controls- Building
More informationMechanical Workshop. Module 2: Measurements. Academic Services PREPARED BY. January 2013
Mechanical Workshop Module 2: Measurements PREPARED BY Academic Services January 2013 Applied Technology High Schools, 2013 Module 2: Measurements Module Objectives After the completion of this module,
More informationMeasuring and laying-out tools, gauges
Measuring and laying-out tools, gauges Slide calipers Micrometer gauges Thread measuring wires Setting gauges Multi-purpose measuring devices Accessories Gauge blocks Gauges Gauge ball sets Flatness testers
More informationWORKSHOP EQUIPMENT. TIGER 2000S Ø200 x 40mm K 220 grinder stone 120W / 240V motor. Order Code: W859 $220 RRP JIG 60. Order Code: W8642 $38 50 RRP
WORKSHOP EQUIPMENT NOV-DEC 2018 JAN 2019 INDUSTRIAL BENCH GRINDER WITH LINISHER & MITRE TABLE X8-PLUS 200mm medium grade wheel 750W / 1hp 240V motor Disc Mitre Table with Guide WETSTONE GRINDER TIGER 2000S
More informationProtractors / Clinometers / Spirit levels
Protractors / Clinometers / Spirit levels Accuracy of clinometers/spirit levels according DIN 877 Graduation Flatness (µm) µm/m " (L = length in ) 50 10 4 + L / 250 > 50-200 > 10-40 8 + L / 125 > 200 >
More informationD c mm Clamp PK247 PK249 PK250 PK251 PK252 PK253 FS2023 (SW 0,9) FS202 (Torx 6)
Reamers R 4060 Tool Designation d 1 Z No. of indexable inserts Indexable insert type d 1h6 R4060.Z10.06H6.00.C-E1 6 10 62 43 15 1 0,05 1 P 65.. - 00R -.. R4060.Z10.07H6.0.C-E1 7 10 65 42 25 1 0,05 1 P
More informationCA03B. Measuring Equipment
CA03B Measuring Equipment Groz is a leading manufacturer of quality tools & precision equipment to industry worldwide. Over the years we have developed into a respected global leader. Our first class reputation
More information2014 Promotional Products
2014 Promotional Products 1 2 + 1 2 Asimeto delivers the Value Plus 12+12 Warranty Program to guarantee the accuracy and reliability of all products. Simply visit Asimeto.com and register your tool(s)
More informationRoyal Corporation, Chennai
+91-8071676709 Royal Corporation, Chennai https://www.indiamart.com/royalcorporation/ We are the trader of measuring instruments, cutting tools, lifting tools and magnetic tools. All our products find
More informationWorkshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP
Workshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP Workshop Workshop Index 282 Adjustable Reamers 287 Air Tools Die Grinder Kit 286 Carbide Burs Double Cut 285 Countersinks 292
More informationINTERAPID Small Bench SHE.30 or SHE.35
0 to 0 mm Mobile measuring bolt mounted on a plain bearing, also fitted with a semi-circular releasing disc plate. Measuring inserts supplied in pairs. One is tighten on the measuring bolt, the other on
More informationEXPERIMENT 1 TO CHECK WHETHER THE MEASURING INSTRUMENTS ARE ACCURATE, PRECISE OR BOTH.
EXPERIMENT 1 TO CHECK WHETHER THE MEASURING INSTRUMENTS ARE ACCURATE, PRECISE OR BOTH. Aim 1: To check whether the given Vernier Caliper is accurate, precise or both. Objective: Students will be able to
More informationMEASURE SMALL HOLES BORE GAGES FROM DIAMETER "
MEASURE SMALL HOLES BORE GAGES FROM DIAMETER 0.015" Maximum Accuracy Linear ±0.000040" (0.001 ) Repeatability ±0.000040" (0.001 ) Dial Indicator Electronic Indicator Fast, Dependable Gaging Available in:
More informationno mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable
More informationMEASURING PROBES, DIGITAL DISPLAYS AND BENCH TABLES
MEASURING PROBES, DIGITAL DISPLAYS AND BENCH TABLES The Sylvac linear probes are based on the capacitive principle characterized by a high degree of accuracy also on long measuring ranges up to 50mm. The
More information110 to 330 Ω/ Ω 20 mω 330 to 1.1 kω/0.001 Ω 20 mω. 110 to 330 kω/0.1 Ω 12.8 Ω. 33 to 110 kω/0.1 Ω 4.1 Ω
IAS Accreditation Number Accredited Entity Address CL-178 Qatar Calibration Services WLL, (QCAL) QP West Services Area Ghuwairiya, St IR #1 Ras Laffan Doha, PO Box 16069, State of Qatar Shreenivasa T R,
More informationEach Height Master is supplied with a gauge block for reference-height setting. Fitted wooden case supplied. SPECIFICATIONS
Height Master SRIS 515 Models with the the staggered arrangement of blocks have two measuring faces on the same level, one facing up and the other down (except for 515-310). Staggered 20mm blocks (movable)
More informationMetrology Prof.Dr Kanakuppi Sadashivappa Bapuji Institute of Engineering and Technology Davangere
Metrology Prof.Dr Kanakuppi Sadashivappa Bapuji Institute of Engineering and Technology Davangere Lecture 33 Electrical and Electronic Comparators, Optical comparators (Refer Slide Time: 00:17) I welcome
More informationK3D60a ±100N. Description. The K3D60a three-axis sensor is suitable for measuring force on three mutually perpendicular axes.
K3D60a ±100N Description The K3D60a three-axis sensor is suitable for measuring force on three mutually perpendicular axes. The new 3-axis sensor K3D60a is a further development of the series K3D60 and
More informationSample Test Project. District / Zonal Skill Competitions. Skill- CNC Turning. Category: Manufacturing & Engineering Technology
Sample Test Project District / Zonal Skill Competitions Skill- CNC Turning Category: Manufacturing & Engineering Technology Version 1 Dec 2017 Skill- CNC Turning 1 Table of Contents A. Preface... 3 B.
More informationMaraMeter. Indicating Snap Gages
- 9-2 MaraMeter. Indicating Snap Gages Overview MaraMeter. The Indicating Snap Gage is ideal for highly accurate and reliable results on cylindrical work pieces with a narrow tolerance. MaraMeter 840 F
More informationMEASUREMENTS AND UNITS
MEASUREMENTS AND UNITS PHYSICAL QUANTITY It is a quantity that can be measured with an instrument such as length. A physical quantity has a magnitude and a unit. For example: length of 20 m Unit Physical
More information3D SENSORS 2-in-1 3-AXIS EDGE FINDER & MEASURING INSTRUMENT.
3D SENSORS 2-in-1 3-AXIS EDGE FINDER & MEASURING INSTRUMENT www.haimer-usa.com HAIMER Sensors Benefits 1. No math needed Zero on the indicator = Zero on the machine control The sensor is pre-calibrated
More informationHeight Master SERIES 515
Technical Data Graduation:.00001" or 0.001mm Counter Resolution:.001 or 0.01mm Character Height:.16" / 4mm Micrometer Head Travel stroke: 1 or 20mm itch:.025 /rev or 0.5mm/rev Hysteresis:.00004 or 1µm
More informationRS Pro Mechanical Ball Anvil Micrometer 0-25mm
RS Stock No: 300-8265 Specifications: Accuracy conforms to DIN 863 Resolution: Metric 0.01mm Micro fine graduations for accurate reading Tungsten carbide spindle face Spindle locking lever Ratchet stop
More informationVanjari Seethaiah Memorial Engineering College Patancheru, Medak METROLOGY LAB LABORATORY MANUAL. Department of Mechanical Engineering
Vanjari Seethaiah Memorial Engineering College Patancheru, Medak METROLOGY LAB LABORATORY MANUAL Department of Mechanical Engineering PREFACE These lab sessions are intended to make the students understand
More informationHAND TOOLS. Moore & Wright Engineers Squares. For more information visit Features. WORKSHOP SQUARES: Grade B DIMENSIONS TABLE (MM)
Moore & Wright Engineers Squares Precision ground blade and stock Blind rivetted construction Hardened and tempered blades 3" & 4" available in Retail Packs 4006 WORKSHOP SQUARES: Grade B Blade Length
More informationLINEAR MEASUREMENT. Prof.H M Prajapati & Prof. A R Sankhla
LINEAR MEASUREMENT Introduction Classification Based on the type of standard Line measurement End measurement Based on precision Precise Direct: Vernier caliper, Micrometer Indirect: Telescopic gauge,
More informationAward recommendations highlighted in yellow. Rapid City, SD Quote # Quantity Description of Item Tormach Inc. $48,870.00
Tormach 15L Slant-Pro Deluxe Education Package shall be as follows, and shall include: 1 3 Tormach 15L Slant-Pro CNC Lathe: - 15 Swing over bed diameter - 3HP Spindle - 1.53 Spindle Bore 8-Station Turret
More informationHM-47 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column & Stand
HM-47 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column & Stand Ex GST Inc GST $3,790.00 $3,280.00 $4,358.50 $3,772.00 Special Ends 30/06/2018
More informationMarch weeks. surcharge for
March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not
More informationComparative Measuring Instruments
Comparative Measuring Instruments F-1 TESA YA Internal Measuring Instruments Specially designed for small bores from 0,47 up to 12,20 Determine dimensions as well as form and shape deviations through 2-point
More informationMetrology (0) PROMO 13.1E. Resolution:.0005" (0.01mm).0005" (0.01mm) Grads
Metrology PROMO 13.1E Automatic off after 5 minutes with no loss of position Accuracy meets DIN862 Resolution:.0005" (0.01mm).0005" (0.01mm) Grads Call 00 44 (0)1835 863501 today IP67 Electronic Calipers
More informationModule-2 Lecture-2 Combination set, Vernier calipers. (Refer Slide Time: 00:16)
Metrology Prof. Dr. Kanakuppi Sadashivappa Department of Industrial and Production Engineering Bapuji Institute of Engineering and Technology-Davangere Module-2 Lecture-2 Combination set, Vernier calipers
More informationSpecial. Offers. UNICAL 2 Universal Digital Caliper. Digital Bore Gauge Sets. R400 GXL Horizontal Bench Profile Projector.
Special SPRING / SUMMER 2015 Valid until 30th September 2015 (subject to availability) www.bowersgroup.co.uk Offers UNICAL 2 Universal Digital Caliper See page 5 for details. NEW LAUNCH PRICE Digital Bore
More informationWORKSHOP EQUIPMENT inc GST ORDER CODE: B inc GST
WORKSHOP EQUIPMENT RNB40 NUT & BLIND RIVETER SET 130 piece kit suitable for sheet aluminium, steel & stainless Includes: Aluminium rivet nut inserts: M5, M6, M8, M10 - (10 of each size) Blind aluminium
More informationMETRIC / IMPERIAL MINI-MAG LEVEL
Digital Mini-Mag Level 570 Series Measuring range 360 (4 x 90 ) Embedded magnets on three sides Resolution 0.05 Accuracy +/- 0.2 Standard 9V battery Dimensions: L60mm x H60mm x W35mm METRIC / IMPERIAL
More informationQATAR CALIBRATION SERVICES WLL, (QCal) QP WEST SERVICES AREA GHUWAIRIYA, ST. IR #1 RAS LAFFAN DOHA, PO BOX STATE OF QATAR
This is to attest that QATAR CALIBRATION SERVICES WLL, (QCal) QP WEST SERVICES GHUWAIRIYA, ST. IR #1 RAS LAFFAN DOHA, PO BOX 16069 STATE OF QATAR Calibration Laboratory CL-178 has met the requirements
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
CET Structures Ltd. trading as CET Calibration M1 Commerce Park Markham Lane Duckmanton Chesterfield S44 5HS Contact: Mr Chris Locke Tel: +44 (0)1246 828318 Fax: +44 (0)1246 828319 E-Mail: chris.locke@cetcalibration.com
More informationInstitute of Applied Technology
Institute of Applied Technology Year 12 Machining Semester 1 September 2013 1 Machining 2 Lets Warm Up Think, Pair, Share Minds On Activity Video 1 The Lathe Objectives After the completion of this unit,
More informationTurret Milling Machine Geared Head Horizontal - Vertical
Product Brochure M163D HAFCO METALMASTER HM-52G Turret Milling Machine Geared Head Horizontal - Vertical (X) 600mm (Y) 200mm (Z) 340mm Page 1 of 5 Specifications & Prices are subject to change without
More information15 Industrial Tools. Recognized by Professionals. Work Together. Scribing Needle. Replacement of Scribing Needle. Features. Use A B
Industrial Tools Recognized by Professionals Work Together With battery : Sleeve package Card Box Clear package Scribing Needle 74444 74468 78638 78646 7864 7860 7444 74469 Retracts needle by turning body
More informationmm 0.8 mm 28 mm mm 0.8 mm 38 mm
Top Mounted s BESTEST indicators with top mounted dials are supplied with a rectangular bar, swivel clamp, contact point wrench and a certificate of accuracy and traceability in a fitted case. Contact
More informationTool and Die Maker Level 2
Level 2 B2 Read and Interpret Drawings II Duration: 32 hours 32 hours 0 hours This unit of instruction introduces the Tool and Die Maker Apprentice with the knowledge and skills necessary to read and interpret
More informationCALIPERS VERNIER, DIAL AND DIGITAL. Micron Digital Calipers 0,001mm. Vernier Calipers 0,02mm. Item No. Measurement Range Accuracy
CALIPERS VERNIER, DIAL AND DIGITAL Micron Digital Calipers 0,001mm Vernier Calipers 0,02mm 140-101 140-102 140-103 Special vernier section structure anvoids parallax error for easy reading and more accurate
More informationHAND TOOLS. Carpenters Square. Basic Combination Set 520 Series
Carpenters Square Steel base and ergonomic design for ease of use Allows positive location and clamping Offers fixed angles: 45, 90 With mini carbide scriber and level vial Squareness within 0.2mm / 300mm
More informationPrecision Square SERIES 916. Precision Dial Square SERIES 7. Spring Dividers and Calipers SERIES 950 SPECIFICATIONS
Precision Square SERIES 916 Three types of square are available. All edges are hardened and precision ground. 916-402 with stand 916-213 Standard type 916-102 Beveled-edge type Size (H x W) Order No. Remarks
More informationHM-50 - Turret Milling Machine (X) 600mm (Y) 200mm (Z) 340mm Includes Digital Readout, Vice & Collet Chuck System
HM-50 - Turret Milling Machine (X) 600mm (Y) 200mm (Z) 340mm Includes Digital Readout, Vice & Collet Chuck System Ex GST Inc GST $5,500.00 $6,325.00 ORDER CODE: MODEL: Digital Readout: Type: Table Size
More informationArc Radius Measuring Gauge
Arc Radius Measuring Gauge Inverted Measuring Gauge Optical Flats Dial Center Finder Bore Gauge Checkmaster Optical Parallel Flats For checking the parallelism & flatness of seals, mating and gages surface.
More informationHAFCO METALMASTER BM-30A. Turret Milling Machine. (X) 760mm (Y) 360mm (Z) 430mm. Product Brochure
Product Brochure M603D HAFCO METALMASTER BM-30A Turret Milling Machine (X) 760mm (Y) 360mm (Z) 430mm Page 1 of 5 Specifications & Prices are subject to change without notification - 2019-03-27 M603D.pdf
More informationMetrology and instrumentation Indian Institute of Technology
Metrology and instrumentation Indian Institute of Technology SOURCE: S. KALPAKJIAN BOOK SLIDE-WAY CROSS-SECTION Cross-section of a machine tool slide-way. The width, depth, angles, and other dimensions
More informationWARNING: Read these instructions before using the machine DOVETAIL JIG MODEL NO: CDTJ12 / CDTJ24 PART NO: ,
WARNING: Read these instructions before using the machine DOVETAIL JIG MODEL NO: CDTJ12 / CDTJ24 PART NO: 6462170, 6462175 OPERATION & MAINTENANCE INSTRUCTIONS LS0111 INTRODUCTION Thank you for purchasing
More informationKIT DAD OUT FOR THE SEASON
ON SALE 1st Aug - 31st Oct 14 KIT DAD OUT FOR THE SEASON 213PC TOOL KIT 6 Drawer Toolchest with BBS Multiple inserts for organised tools 30PC Hexagon Key AF 24PC Comb Spanner 54PC Bit PC ¼ & 3/8 DR Socket
More informationComparative Measurement
Comparative Measurement H-1 TESA YA Bore Gauges TESA YA Complete Instrument SETS Specially designed for small bores from 0,47 up to 12,20 - Checking of dimension and bore form errors through 2-point measuring
More informationHM-54GV - Turret Milling Machine Inverter Variable Speed, Geared Head Horizontal & Vertical
HM-54GV - Turret Milling Machine Inverter Variable Speed, Geared Head Horizontal & Vertical Ex GST Inc GST (X) 600mm (Y) 200mm (Z) 340mm Includes Digital Readout, Vice & Collet Chuck System $7,250.00 ORDER
More informationHand Tools MEC072 SAMPLE
Module Resource Manual SECOND EDITION Hand Tools MEC072 This second edition published in December 2002 by Manufacturing and Engineering Division Southern Sydney Institute, NSW TAFE Commission PO Box 218
More informationHOMMEL-MOVOMATIC Standard products and application guide
OPTICAL SYSTEMS LASERS & MATERIAL PROCESSING INDUSTRIAL METROLOGY TRAFFIC SOLUTIONS DEFENSE & CIVIL SYSTEMS HOMMEL-MOVOMATIC Standard products and application guide Precision is our business. Your partner
More informationTEST INDICATORS & HOLDERS
J.W. DONCHIN CO. 4841-43 W. Chicago Ave. Chicago, IL 60651-3224 Ph: 773-261-2182 Fax: 773-261-2867 Sales@jwdonchin.com www.jwdonchin,com TEST INDICATORS & HOLDERS Contents Pg Description Series Range 139
More informationCAN BE INSTALLED DIGITAL DEPTH GAGE WITH EXTENSION BASE DATA OUTPUT 48-52, MM/INCH
E16 SPECIAL MEASURING JAWS GAGE *The mm measuring jaw can be customized according to design drawing or measurement item of workpiece Unit: to suit your particular requirements. E17 Digital Caliper (Tungsten
More informationUsing a Vernier Caliper
ACCURATE MEASUREMENTS by Steve Bodofsky Using a Vernier Caliper That s right don t waste time trying to learn how to use all the different types of vernier calipers and micrometers. You don t need to know.
More informationMIX & MATCH CAT40 ER Collet Chucks & Collets
Canadians Supporting Canadians Pricing valid from January 1 to March 31, 2019 2019 Winter Flyer MIX & MATCH CAT40 ER Collet Chucks & Collets Huge Savings on a 6-Pack CAT40 ER Collet Chucks 1. Select 6
More informationHM-48 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column, Power Feed & Stand
HM-48 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column, Power Feed & Stand Ex GST Inc GST $4,350.00 $3,990.00 $4,785.00 $4,389.00 Special
More information.com More than a machine. Power your life. Precise Centre Metal Lathes. Advanced Technology, Complete
Precise Centre Metal Lathes. Advanced Technology, Complete Equipment, Easy-to-Operate. This kind of MM-D420X1000 universal metal lathe machine is a fantastic model for small to medium-size turning works
More informationWhen Quality Counts we are Always One Step Ahead Simply The Finest
Gauging 1 2 Hermann Diebold When Quality Counts we are Always One Step Ahead Simply The Finest Diebold, and many other manufacturers of close-tolerance tool holders and highly precise equipment, have been
More informationDi-Acro 18E Stylus Turret Punch Press
OPERATOR S MANUAL & INSTRUCTIONS Di-Acro E Stylus Turret Punch Press Di-Acro, Incorporated PO Box 00 Canton, Ohio Progress Street N.E. Canton, Ohio 0 0-- 0--00 (fax) Revised 0/0 Sale or distribution of
More informationw w w. h d o n l i n e s h o p. d e TIMKEN BEARING CONVERSION TOOL GENERAL INSTALLATION -J04672 REV Kit Number Models
-J067 REV. 008-07- GENERAL Kit Number 8-08 Models TIMKEN BEARING CONVERSION TOOL For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com
More informationTESA THE SPECIALISTS FOR LONG LENGTHS
TESA THE SPECIALISTS FOR LONG LENGTHS Large sizes mechanical engeerg mean dimensions excess of 500. Besides various measurement procedures like those that apply large ternal or external micrometers with
More information.com More than a machine. Power your life. Precise Centre Metal Lathes. Advanced Technology, Complete
Precise Centre Metal Lathes. Advanced Technology, Complete Equipment, Easy-to-Operate. This kind of MM-D420X1500 universal metal lathe machine is a fantastic model for small to medium-size turning works
More informationspecialty micrometer and caliper promotion
V-Anvil Point Carbon Fiber Inside Groove Disk Neck specialty micrometer and caliper promotion effective October 1, 2015 through January 29, 2016 GeNeral Pricing reduced 10-20% from original Mituotyo sales
More informationZero Point Clamping System. ZERO lock BALL lock
Zero Point Clamping System ZERO lock BALL lock kap3 kap 263 Technical information regarding ZERO lock Zero Point Clamping System Application The modularly designed, flexible ZERO lock Zero-Point Clamping
More informationTESA QUICK DEALS
mailto:office@streng.co.il לקבלת הצעת מחיר נא לשלוח מייל ל- TESA QUICK DEALS 2018-2 Special promotion up to 58% off the list price Prices valid until: 30.09.2018 or while stock reserved for this promotion
More informationSample Test Project. District / Zonal Skill Competitions. Skill- CNC Milling. Category: Manufacturing & Engineering Technology
Sample Test Project District / Zonal Skill Competitions Skill- CNC Milling Category: Manufacturing & Engineering Technology Version 1 Dec 2017 Skill- CNC Milling 1 Table of Contents A. Preface... 3 B.
More informationABSOLUTE Coolant Proof Caliper
ABSOLUTE Coolant Proof Caliper SERIES 500 with ust/water Protection Conforming to IP67 Level exposed to coolant, water, dust or oil. the scale. system. High quality guide surface finish for smooth slider
More informationThe STRIKE Connector System
I N D U S T R I A L The STRIKE Connector System The STRIKE Connector System The STRIKE Connector System is designed for heavy duty equipment. It combines technical know how of DEUTSCH in connectors with
More informationQuestion 1. Flat file. Half -round. Round file. Three square ( triangle ) Needle files. Page 1 of 46
Question 1 Name Picture Cross section Uses: Cut pattern:: Flat file Half -round Round file Three square ( triangle ) Needle files Page 1 of 46 Question 2 The graph shown below is the data collected for
More informationI 640 West. c Offi. pany Phone. c ~ g CHICAGO 6. Ill. M h:tjryant OMPOUND RING BAR SUPPORT. GilBERT C DEarbom ~.
ll / - M h:tjryant c Offi I 640 West g CHICAGO 6. Ill pany Phone. c ~ GilBERT C DEarbom 2-5566 ~. OMPOUND TIL~:~ BORING, ~~: F:o~~:YH~~~ DRILLING ':~~~N~:E~~7:NE RECTANGULAR TAB ~~~;:E~:~z:T~~L TABLEe
More informationACP 160. Cylinder boring machine. BERCO S.p.A. A Company of ThyssenKrupp Technologies
ACP 160 Cylinder boring machine A Company of ThyssenKrupp Technologies BERCO S.p.A. ACP 160 Cylinder boring machine Berco's high productivity ACP160 series presents the ultimate in engine block boring
More informationKAITE KWIK CHECK Rev.01
KAITE KWIK CHECK Rev.01 Rapid read hole measuring gauge for all industries. spray nozzle experts for the processing industry KAITE LTD elegance in design 2 KAITE KWIK CHECK Hole Gauge The KAITE KWIK CHECK
More informationQuality Assurance Supplier Reference Guide
Quality Assurance Supplier Reference Guide Tel: (561) 840-1800 * Fax: (561) 844-8551 www.svmicrowave.com 7/20/2015 Table of Contents Page 1.0 Introduction 1 2.0 SV Drawing Format Interpretation 2 3.0 Inspection
More informationCamshaft Endfloat Mod GS550 GS1100 (2 valve engines) Ian Grant (49er) June 2007 (v 2)
Camshaft Endfloat Mod GS550 GS1100 (2 valve engines) Ian Grant (49er) June 2007 (v 2) I wish to acknowledge the insight I have gained from the many threads and posts covering this subject, by past and
More informationRoundness/Cylindricity Measurement ROUNDTEST RA-2200 Series
Form Measurement Roundness/Cylindricity Measurement ROUNDTEST RA-2200 Series Catalog No.E4385 Roundness/Cylindricity measuring system offering highest precision level in its class, exceptional ease-of-use,
More informationMACHINE TOOL ACCESSORIES
VERTICAL 5-C COLLET VISE SERIES 344: VERTICAL 3-C COLLET VISE SERIES 344: : 2-1/2 x 7-3/4 Height: 4 Small movement of lever opens or closes collet. 2030000 CAM OPERATED 5-C HORIZONTAL/VERTICAL COLLET FIXTURE
More informationMachining. Module 1: Introduction to Machining. Curriculum Development Unit PREPARED BY. August 2013
Machining Module 1: Introduction to Machining PREPARED BY Curriculum Development Unit August 2013 Applied Technology High Schools, 2013 Module 1: Introduction to Machining Module Objectives After the completion
More informationHAFCO METALMASTER HM-50. Turret Milling Machine. (X) 600mm (Y) 200mm (Z) 340mm. Product Brochure
Product Brochure M160D HAFCO METALMASTER HM-50 Turret Milling Machine (X) 600mm (Y) 200mm (Z) 340mm Page 1 of 5 Specifications & Prices are subject to change without notification - 2018-11-02 M160D.pdf
More informationMeasuring and Laying-Out Tools, Testing Instruments
ß 7006 0 With 0-180 scale and locking screw. Protractors Measuring and Laying-Out Tools, Testing Instruments Standard steel, chrome-plated, scale dazzle-free and with matt-chrome finish. 7006 Arc Ø Blade
More informationHow to Calibrate a CNC Machine's Positioning System
How to Calibrate a CNC Machine's Positioning System Guide to calibrating the Haas wireless intuitive probing system. Written By: Kim Payne 2018 gunnerautomotive.dozuki.com/ Page 1 of 20 INTRODUCTION Attention:
More informationPediatric. REGAL PROSTHESIS LTD. An ISO13485:2003 and ISO9001:2008 certified company Your reliable partner
9 Regal SACH foot (pediatric) 0-01-FTT & s 0-01-FTT Side Foot Length Heel Height 0-01-FTT-L-12 Left 12cm 10mm 60kg 0-01-FTT-R-12 Right 12cm 10mm 60kg 0-01-FTT-L-13 Left 13cm 10mm 60kg 0-01-FTT-R-13 Right
More informationUniversal Machining Chucks. 4-Jaw Vertical
Universal Machining Chucks 4-Jaw Vertical Parts are gripped firmly by the formed jaws, ensuring high precision (deviation within 0.03mm) Large workpieces can be held tight with the low profile vise body
More informationSCHMIDT ManualPress From 1.6 kn to 22 kn / 360 lbs. to 4945 lbs.
SCHMIDT ManualPress From 1.6 kn to 22 kn / 360 lbs. to 4945 lbs. Efficient manufacturing requires appropriate means of production not always automation. In particular, with small production runs, manual
More informationMill Specifications. FEATURE 5000(5100) 5400(5410) 2000 (2010) Max clearance, table to spindle
Mill Specifications FEATURE 5000(5100) 5400(5410) 2000 (2010) Max clearance, table to spindle 8.00" (203 mm) 8.00" (203 mm) 9.00" (229 mm) Throat (without headstock spacer block) Throat (with headstock
More informationSAVE UP TO 35% INDICATOR PROMOTION. Dial Test, Dial, Digimatic. Effective July 1, 2016 through August 31, 2016
IDEAL PRECISION INSTRUMENT SERVICE,INC. 4539 EAST BROAD STREET COLUMBUS, OHIO 43213 PH. 800-867-1433 / FX. 614-866-5441 SALES@IDEALPREC.COM / WWW.IDEALPREC.COM SAVE UP TO 35% Dial Test, Dial, Digimatic
More informationSENSORS. for Punching, Forming and Automation Systems. Infrared and Laser Light Barriers. Inductive Proximity Switches.
for Punching, Forming and Automation Systems Infrared and Laser Light Barriers Inductive Proximity Switches Sensors with Analogue Output Laser Reflex Scanners Accessories SENSORS Business Divisions Business
More informationGear Drive Hapkit Assembly Instructions
Gear Drive Hapkit Assembly Instructions (1) Order and Print the necessary parts Figure 1: 3D Printed Parts and Hardware Note: The screws shown were replaced with button head screws and the second pair
More information