Tilt and sliding mechanisms. SLIDEART TS Page 556
|
|
|
- Ambrose Lamb
- 5 years ago
- Views:
Transcription
1 SLIDEART TS Page 6
2 Basic kit of left hand rollers. Complete kit with 1 pair of rollers in 1 aluminium, die-cast zamak and stainless steel, 2 guide sliding piece, 1 LH tilt arm and 1 RH tilt arm in stainless steel and zamak, 2 stainless steel counterplates, screw spacer and 2 reinforcements in black nylon, 2 TORX (T2) cap screws Mx12, TORX (T2) cap screws 4.8x2, 9 TORX (T2) cap screws 4.8x0 and 8 TORX (T20) countersunk head screws 4.2x2 in stainless steel. Weight capacity: 2 rollers max 100 Kg Basic kit of right hand rollers. Complete kit with 1 pair of rollers in aluminium, die-cast zamak and stainless steel, 2 guide sliding piece, 1 LH tilt arm and 1 RG tilt arm in stainless steel and zamak, 2 stainless steel counterplates, screw spacer and 2 reinforcements in black nylon, 2 TORX (T2) cap screws Mx12, TORX (T2) cap screws 4.8x2, 9 TORX (T2) cap screws 4.8x0 and 8 TORX (T20) countersunk head screws 4.2x2 in stainless steel. Weight capacity: 2 rollers max 100 Kg. 1 6 Slideart Ts
3 2406/ / / /1100 Guides and covers (L=from 700 to 1100 mm) in aluminium, zamak caps, , 8019, 900, 9010, BL10, C, F, 1 stroke end in aluminium and nylon. GR217, NE, SILV, ZE 2406/1400 Guides and covers (L=from 1101 to 1100 mm) in aluminium, zamak caps, 1 stroke end in aluminium and nylon. 2406/1700 Guides and covers (L=from 1401 to 1700 mm) in aluminium, zamak caps, 1 stroke end in aluminium and nylon. 1013, 8019, 900, 9010, BL10, C, F, GR217, NE, SILV, ZE 1013, 8019, 900, 9010, B.MA, BL10, BR, BR801, C, F, NE, SILV, ZE 1 1 Slideart Ts 7 D CODICE A B C D E C 2406/ / / B A 2406/ / /1700
4 R L Kit of 2 aluminium reinforcements, 2 zamak caps, 4 TORX (T2) cap 1013, 8019, 900, 9010, B.MA, BL10, 1 screws 4.8x2 and 4 TORX (T2) cap screws Mx12 in stainless steel. BR, BR801, C, GR217, SILV R RH 4 closing point kit, in black galvanized zamak, premounted TORX in stainless steel 304 and L LH 4 closing point kit, in black galvanized zamak, premounted TORX in stainless steel 304 and Slideart Ts
5 Closing kit. Basic kit (4 locking points) with corner devices, transmission and movement devices, hooks and closing point in black zamak, screws in stainless steel Closing kit. Basic kit (4 locking points) with corner devices, transmission and movement devices, hooks and closing point in black galvanized zamak, screws in stainless steel Closing kit. Basic kit (4 locking points) with corner devices, transmission and movement devices, hooks and closing point in black galvanized zamak, screws in stainless steel 304. Slideart Ts 9
6 Locking piece in black galvanized zamak, 1 polyurethane cap Keeper in black galvanized zamack, 1 preasembled grub screw Mx6 in 40 stainless steel Locking piece in black galvanized zamak, 1 polyurethane cap Locking piece in black galvanized zamak, 1 polyurethane cap Upper corner drive in black galvanized zamack Adjustable keeper in black galvanized zamak, 2 pre-assembled grub 40 screws Mx12 and 1 countersunk head screw M4x8 in stainless steel Adjustable keeper in black galvanized zamak, 1 pre-assembled grub screw Mx6 in stainless steel ,8 4, 14, 10, Ø,8 19, 2,
7 R L Upper corner drive in black galvanized zamak Upper corner drive in aluminium and black galvanized zamack (patented) Intermediate closing point in white galvanized zamak, 40 premounted screws in stainless steel 304 and 430, and adjustable locking piece R (patented) Right kit for 6 closing points in white galvanized zamak, premounted screws in stainless steel 304 and L (patented) Left kit for 6 closing points in white galvanized zamak, premounted screws in stainless steel 304 and ,8 19, 18 2,7 Ø,8 6 Ø, ,4 2,3 13, 19, Ø6 4
8 Roller support drilling jig, in black nylon, with co-molded steel bushings Fixed return sash piece positioning jig, in black nylon , ,6 6, , 96 16, 16, ,3 101,
9 Supplementary arm in stainless steel and white galvanized zamak Cover carter in aluminium and nylon. To use for window applications. 1013, 8019, 900, 9010, B.MA, BL10, C, F, NE, SILV, ZE ,9 31,1 38,
10 Releasable return sash piece in zamak, cap and handle in nylon Upper guide drilling jig, in black nylon, with co-molded steel bushings ,2 10 1,7 21,2 6 3,4 22, 10,
11 Lower guide positioning jig, in black nylon and white galvanized steel Accessories positioning jig in brown nylon , 8 4, 11, 1, 28,
12 66 TECHNICAL SCHEMES art. 2410
13 TECHNICAL SCHEMES art /.2 67
14 68 TECHNICAL SCHEMES art R/L
15 TECHNICAL SCHEMES art R/L 69
16 70 TECHNICAL SCHEMES art
For Euro grooves and NC International profiles
RIBANTA For Euro grooves and NC International profiles - All accessories are frontally applied - Connection rods are modular and provided already pre-cut to standard sizes - All parts are pre-assembled
ARIANNA NEW RANGE OF HANDLES. New design with strong shapes Complete range Long-lasting durability Sturdy and fluid
ARIANNA NEW RANGE OF HANDLES New design with strong shapes Complete range Long-lasting durability Sturdy and fluid 02 General features ARIANNA. General features 03 BEAUTY WITHIN REACH If today's market
PAS 24:2012 Enhanced security performance requirements for doorsets and windows in the UK. Laboratory Engineer D Knight
Page 1 of 16 Technical Report Report No Product Tested: Test Conducted for: Standard Specified: R16623 Thermal brake window ALTW62 Alumin Techno LLC Selitskogo str. 12-211 220075 FEZ Minsk Minsk Region
BERNINI PANIC DEVICES
BERNINI PANIC DEVICES With EC mark, in compliance with standard EN 25:2008 Exclusive Pininfarina design Complete application adaptability Fast and easy installation Functional safety and reliability Also
WITH NEW HINGES. Suitable for EURO GROOVE and NC INTERNATIONAL profiles GB 02/2005
WITH NEW HINGES Suitable for EURO GROOVE and NC INTERNATIONAL profiles I GB 0/00 General features R A L T E S T S F O R R I B A N T A 4 Technicians of the Gütegemeinschaft Schlösser und Beschläge laboratory
PANIC BARS Marking IN ACCORDANCE WITH 1125:1997/A1:2001
PANIC BARS Marking IN ACCORDANCE WITH 25:997/A:200 Exclusive PININFARINA design Full adaptability in application Quick and easy installation Reliable and safe performance Tested up to 2.000.000 cycles
Hardware Fitting Accessories Bolts
Lever action flush bolt With slide Width: 19 mm Stroke (a): 25 mm 1 Flush bolt 1 Set of fastening material With lever arm Width: 19 mm Stroke (a): 18 mm 1 Flush bolt 1 Set of fastening material Stainless
WINDOW TECHNOLOGY ORDER CATALOG SECTION Tilt&Turn Hardware UNI-JET D PVC
WINDOW TECHNOLOGY ORDER CATALOG SECTION 06.1 Tilt&Turn Hardware UNI-JET D PVC Table of Contents 06.1 UNI-JET D PVC 06 1 DIRIGENT T&T Handle...06.1.9 Tilt&Turn...06.1.10 Turn-Only Sash...06.1.14 Dummy-mullion
ATTRACTION drawer. Twin-walled seel drawer. Complete. 50 Kilos resistance. indamatic. Range of concealed runners up to. self closing and soft closing.
F U R N I T U R E F I T T I N G S M A N U F A C T U R E R Twin-walled seel drawer. Complete Range of concealed runners up to 50 Kilos resistance. indamatic self closing and soft closing. Double wall 405
aluminium profile system
aluminium profile system 63 AME System aluminium profiles overview series profiles introduction 80x80 x80 x80/180 x Aluminium profiles are provided with longitudinal grooves which can be used in conjunction
C11.16 CHRONO ACCESSORIES C11 SIDE HUNG WINDOWS
C11 SIDE HUNG WINDOWS CHRONO ACCESSORIES 01.12.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Window stays....03
salto safe 4028 A12 Turn-tilt windows
A12 Turn-tilt windows salto safe 4028 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. 32 9 388 88 81 - F. 32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com salto safe 4028 Contents 1. General
CoFold Non-Mortice. Fitting Instructions for top hung exterior folding doors SYSTEM CAPACITY. Diagram 1. Diagram 2. Diagram 3.
1 CoFold Non-Mortice Fitting Instructions for top hung exterior folding doors Diagram 1 SYSTEM CAPACITY Maximum leaf height Maximum leaf weight Maximum leaf width Maximum leaf thickness - 3300mm - 100kg
K15.13 FACE FIXED DOOR HINGES K15 DOORS
K15 DOORS K15.13 01.02.2017 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General... K15.13.03 2. 2-part hinge...
SLIDING DOORS DIRECT ROLLER
SLIDING DOORS Single door fixed to wall NFK s Direct Sliding Door system, for installation to a solid wall. Height adjustable track supports can be quickly mounted to a wall allowing the glass to pass
FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS
SYSTEM COMPONENTS FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS s t r oppu S, s gn i n e t s af r oo l F, s l eehw, t e ef FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS 136 MINITEC PROFILE SYSTEM BASE AND TRANSPORT
Modular transfer system. PDF- Catalog Modular Transfer System
Modular transfer system PDF- Catalog Modular Transfer System 1 Modular Transfer System TLM 1000 156, route de Lyon 38300 DOMARIN FRANCE Phone (33) 4 37 03 33 55 Fax (33) 4 37 03 33 59 September 2001 edition
TECTUS. The completely concealed hinge system
TECTUS The completely concealed hinge system It s still design even if there s nothing to be seen! TECTUS This Latin word for concealed signifies SIMONSWERK s newly developed, completely hidden hinge system.
Vertical Slider Section Detail
Vertical Slider Section Detail PRODUCT GUIDE Main & Bead Profiles 128 42 69 VS01 - Outer frame 150 139 210 189 60 52 52 52 48 30 42 60 18 72 90 18 60 VS02 - Cill VS14 - Cill 18 VS03 - Top Sash VS04 - Standard
STANDARD 430E Series. Bottom mounted full extension drawer runners 430E E E E E E E E E4000
STANDARD 430E Series Bottom mounted full extension drawer runners Specifications Runner 430E8000 430E7500 430E7000 430E6500 430E6000 430E5500 430E5000 430E4500 430E4000 430E3500 430E3000 430E2500 Nominal
STANDARD GEAR SCREW WORM RATIO 3,5:1
ACCESSORIES FOR VERTICAL AWNINGS/SCREENS STANDARD GEAR SCREW WORM RATIO 3,5:1 Screw worm in aluminium. Crown in brass. Self-brake, through bearings. With or without stop, adjustable up to 19 cycles. One
Door & Window Systems
Lift Slide CURRENT LOGO Door & Window Systems Lift Slide Door & Window Pages System Components B-2 to B-5 Door Carriages & Gears B-6 to B-8 Half Gears, extensions B-9 to B-10 Window Carriages & Gears B-11
METALPLAST-SOPRANA BRUINO TO VIA VOLVERA
1 4 HINGES >> METALPLAST-SOPRANA srl 10090 BRUINO TO VIA VOLVERA 88/4 TELEPHONE 011-9086490 FAX 011-9086979 E-MAIL : metsopr@tin.it WWW.metalplast-soprana.com VERSION WITH OVERTURNED PART HINGES WELDABLE
An ASSA ABLOY Group company
An ASSA ABLOY Group company AS A SPECIALIST MANUFACTURER OF WINDOW ACCESSORIES FOR TOPHUNG OUTWARD PROJECTING WINDOWS, RIVALU OFFERS YOU A COMPLETE RANGE OF SOLUTIONS FOR THE CLOSING OF YOUR WINDOW IMPERVIOUSNESS
Company profile WITH EVERY STEP WE MAKE, WE WANT TO KEEP CONTRIBUTING TO OUR GOOD REPUTATION OF A STRONG CZECH MANUFACTURER OF LOCKS AND FITTINGS
Furniture fittings Company profile TOKOZ a.s. is a company working in the field of security mechanisms for more than 90 years. Thanks to years of experience we have become real experts on manufacturing
Roller Guides C-Rail Systems Linear Guide Systems Ball-Bearing Guide Bushes Ball-bush block guides Shafts Accessories for Linear Slides
Roller Guides C-Rail Systems Linear Guide Systems Ball-Bearing Guide Bushes Ball-bush block guides Shafts Accessories for Linear Slides Application example linear systems, drives and accessories 1 2 3
SB-WM-ART2-L-BL SB-WM-ART2-XL-BL
SB-WM-ART2-L-BL SB-WM-ART2-XL-BL Weatherproof Universal Dual-Arm Articulating Mount for Large TVs INSTALLATION MANUAL WARNING The maximum weight of this wall mount is 150 lbs (68.04 kg). Use with heavier
SIKU RB. The knuckle hinge system for PVCu entrance doors
SIKU RB The knuckle hinge system for PVCu entrance doors index SIKU RB RB 5010 3D up to 120 kg drilling position 10.0 mm 4 RB 5015 3D up to 120 kg drilling position 11.5 mm 5 RB 5020 3D up to 120 kg drilling
Table and Furniture Base Fittings Plinth Adjusting Fittings
Adjusting screw with M8 or M thread Rigid, for glide inserts, steel thread Finish/Colour: Black, thread galvanized Version: With acceptance Ø30 mm Thread M8 650.22.381 M 650.22.382 Packing: 1 or 0 pcs.
C13.11 HANDLES AND CONNECTION PIECES C13 SIDE HUNG WINDOWS
C13 SIDE HUNG WINDOWS C13.11 HANDLES AND CONNECTION PIECES 01.05.2014 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS
www.hafeleindia.com www.hafeleindia.com Silver Gold Rose Gold Graphite Dark Bronze PROFIN : ONE RANGE. MANY SOLUTIONS. 2. Stack Modular Shelving Pg. 23-32 3. Rail Door Profiles Pg. 33-41 1. Gola Profiles
J; ('& ): J; )'& ): J; +'& ): J; +(+ ): J;,)& ): 9WXb[ i[j J;9JKI <_n_d] <P%' '& <_n_d] IP 7ii[cXbo 7Z`kijc[dj 9WbYkbWj_ed \ehckbwi
![J; ('& ): J; )'& ): J; +'& ): J; +(+ ): J;,)& ): 9WXb[ i[j J;9JKI <_n_d] <P%' '& <_n_d] IP 7ii[cXbo 7Z`kijc[dj 9WbYkbWj_ed \ehckbwi](/thumbs/85/92217343.jpg "J; ('& ): J; )'& ): J; +'& ): J; +(+ ): J;,)& ): 9WXb[ i[j J;9JKI <_n_d] <P%' '& <_n_d] IP 7ii[cXbo 7Z`kijc[dj 9WbYkbWj_ed \ehckbwi")
INdex ZERTIFIZIERT 4 INTERIOR DOOR SIMONSWERK TECTUS TE 210 3D for unrebated and rebated, flush-faced quality doors Hinge up to 40 kg Technical Data Load capacity Length (leaf/frame) Width (leaf/frame)
Hinges and Flap Fittings Information
Information METALLAMAT Adjustment options Lateral adjustment Adjusting on concealed hinge + mm Height adjustment Via mounting plates adjusting ± 2 mm Depth adjustment Adjusting on concealed hinge + 4 mm,
SB-WM-ART1-M-BL. Weatherproof Universal Single-Arm Articulating Mount for Medium Displays INSTALLATION MANUAL
SB-WM-ART1-M-BL Weatherproof Universal Single-Arm Articulating Mount for Medium Displays INSTALLATION MANUAL WARNING The maximum weight of this wall mount is 90 lbs (41 kg). Use with heavier than the maximum
Door Hinges Drill-in Hinges
Drill-in hinge StarTec Frame part For timber lining frames For rebated doors Maintenance-free friction bearing To use in combination with receiver Max. door weight: 40 kg Knuckle: Ø15 mm Drilling bit Ø7.2
Brio. Weatherfold 4s 150. Codes B WS S H PR. Sets note codes do not show finish, hinge sets not shown to same scale. Brio Weatherfold 4s
INSTBWSH1 REV G - MAR 2018 Brio Codes Weatherfold 4s 150 Brio Australia P: +61 2 87186718 W: brio.com.au E: brio.sales@allegion.com Brio UK P: +44 191 2291224 W: briouk.com E: brio.sales.uk@allegion.com
METALPLAST-SOPRANA BRUINO TO VIA VOLVERA 88/4 TELEPHONE FAX
4 HINGES >> METALPLAST-SOPRANA srl 10090 BRUINO TO VIA VOLVERA 88/4 TELEPHONE 011-9086490 FAX 011-9086979 E-MAIL : metsopr@tin.it WWW.metalplast-soprana.com 2 VERSION WITH OVERTURNED PART ADJUSTABLE HINGE
Tire Chain Kit. Replacing Shear Pins. Weight Kits. Drift Cutter
Replacing Shear Pins The augers are secured to the spiral shaft with two shear pins and cotter pins. If the auger should strike a foreign object or ice jam, the snow thrower is designed so that the pins
Material Packing Brown Grey Pine Black White
RTA Connectors Minifix Zinc alloy For housing: 12 or 18 Bolt hole: Ø 7 or 8, depending on choice of connecting bolt Drilling distance B: Distance from centre of Minifix housing to shelf front edge (24
COMPONENTS AND ACCESSORIES FOR FITTING TIPPERS
Hinges for aluminium side boards M 15020 Raw light perforated support M 15010 Zinc-plated light double opening hinge X 40070 Zinc-plated head cap screw 8x20 M 15030 Light raw locking plate M 15620 Zinc-plated
KUDU03FTPA. Stainless Steel KUDU03FTSS
KUDU03FTPA Stainless Steel KUDU03FTSS KUDU03FTPA Install custom panel Option 1: For models KUDS03FTPA and KUDU03FTPA NOTE: The handle for the custom panel is not included. IMPORTANT: If the handle is
FASTENERS 701L, 701L-ASS 701L-C. Over Centre Fasteners 701 Series. Over Centre Fasteners 701 Series
1 2 Over Centre Fasteners 701 Series 701L, 701L-ASS 701L - Cold Rolled 701L-ASS - 316 Stainless 701L - Zinc Plated 701L-ASS - RAW 41g Padlockable Suits Strikers 30Z & 30-ASS Ø 4.3mm Over Centre Fasteners
PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS
PROFILE SYSTEM PRE-ASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS s r ood gni d i l s dna gni t f i l r o f s t neme l e de l bme s s a - er P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS MINITEC
Locks and Catches Catches and Furniture Bolts
Magnetic catch with low noise closure Material: Plastic housing Version: with closed surface and internal magnet, magnets no viewable : Press fixing Pull 0. kg, for drilling hole Ø8 mm white 26.01.701
Organisational Kitchen Fittings Kitchen Cabinet Accessories
Kitchen waste bin systems Single waste bin, capacity 1 litres Carcase width: Min. 400 mm For door mounting: For left and right hand use Installation: Screw fixing to side panel Housing: Steel, plastic
Connector Technology, Shelf Supports Connection Fittings
MODULAR Connection fitting for recess mounting Finish: Burnished : For recess mounting The plate should allways be installed so that the supporting plate butts against the end of the recess. For rapid
where ideas unfold brio.com.au Brio Timberoll 100/200 Exterior bottom roller sliding door hardware for panels up to 200kg
where ideas unfold brio.com.au Brio Timberoll 100/200 Exterior bottom roller sliding door hardware for panels up to 200kg Brio where ideas unfold Watch your adventurous architectural ideas unfold into
>> ACCESSORIES 5 2 METALPLAST-SOPRANA
CABIN 7 >> ACCESSORIES METALPLAST-SOPRANA srl 10090 BRUINO TO VIA VOLVERA 88/4 TELEPHONE 011-9086490 FAX 011-9086979 E-MAIL : metsopr@tin.it WWW.metalplast-soprana.com 2 GRAB HANDLES GRAB HANDLE CODE 127013
Linear Motion and Assembly Technologies Aluminum Framing /07. Die-Cast Foundation Brackets 3-10 & 3-11
-0 Linear Motion and ssembly Technologies luminum Framing 91 500 1 /07 Section : Profile onnectors Overview One of the greatest strengths of the osch Rexroth structural aluminum framing system is the wide
UPVC. Retrofit. Product Brochure. made easy.
Product Brochure www.chameleonhardware.co.uk UPVC Retrofit made easy CONTENTS ABOUT 4-5. 6-7. 8-9. 10-11. 12-13. 14-15. 16-17. 18-19. 20. 21. 22-23. 24. 25. 26. 27-29. 30-39. 40-44. 45. 46. Retrofit MPL
Selekta Pro 2000 Fast assembly hinges for office and commercial furniture
Fast assembly hinges for office and commercial furniture 99 The program opening angles 180 and 270 with pre-mounted pan-head screws with eccentric height adjustment ± 2 mm with eccentric overlay adjustment
WIRE TENSIONERS. Wire Tensioner Wheel "Sunflower" + 1 stainless steel. Wire Tensioner Wheel "Maxi" MADE IN ALUMINUM DIE CASTING WITH WIRE
ò WIRE TENSIONERS Art. A1 -.. WIRE TENSIONER Wire Tensioner Wheel "SUNFLOWER" MADE IN ALUMINUM DIE CASTING WITH WIRE BLOCKAGE IN STAINLESS STEEL. To be used for: STRETCHING WIRE Ø 3,00 mm Max Wire Tensioner
M4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information
![M4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information](/thumbs/77/74547895.jpg "M4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information")
Handles & Light Duty PA 20 1 Assembly of Hinge M4x8 FHCS [24-208-4] M4 T-Nut 20 [20-044] M4 Hex Nut [24-706-4] 60 300-0 PA 20 on panel 2 Hinge positions 3-4 Clearance dimensions 5 Range of swing FOR M4
Installation Instructions. 40 Series
Marine Roof Installation Instructions 40 Series TABLE OF CONTENTS English... 3 1. INTRODUCTION... 5 2. TECHNICAL SPECIFICATION... 6 3. DESCRIPTION OF THE WEBASTO 40 SERIES... 8 4. INSTALLATION... 9 5.
Leveling Feet, Base Plates and Casters
Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.
Framing Components. Spacers, Gaskets, Cladding. Framing, Spacers & Cladding Pages
Framing Components CURRENT LOGO Spacers, Gaskets, Cladding Framing, Spacers & Cladding Pages Rapid Spacers F-2 to F-3 Drip Rail F-4 Gasketing F-5 to F-7 Cladding Systems F-8 to F-11 Cladding Gasketing
Isuzu D-Max Part Numbers Black Polished
SB007 Sports Bar Fitting Instructions Isuzu D-Max 0 Part Numbers - 55000 - Black - 5000 - Polished Installation Time: 0 min (Approximately) PLEASE KEEP INSTRUCTIONS IN GLOVE BOX FOR FURTHER USE RECOMMENDED
Universal MEBUX thread repair system
Produkt Group C14.01 Installation instructions metric threads Step 1: Drill out the damaged thread all way to the bottom using drill B. Be sure to keep the borehole aligned. Step 2: Use hub cutter F to
ASSA FIX DOOR & WINDOW HANDLES ARCHITECTURAL IRONMONGERS SECURITY SPECIALISTS
ASSA FIX DOOR & WINDOW HANDLES ARCHITECTURAL IRONMONGERS SECURITY SPECIALISTS Vinga, handle for windows and glazed doors, Fix 7311 7311 PaTEnT/REGISTERED DESIGn Fix 7311 is a handle for both older and
Toilet Partition Hardware
Concealed and Surface Mounted Latches Toilet Partition Hardware D D 91-8 Used with 91-129 Housing merican Metal 91-330 Used with 91-129 Housing 91-84 91-130 For 1" Laminated Door 91-131 With Flat Tip Bar.
Architectural Folding System for Timber Doors
Uniclass L41104:N14 EPIC D11103 TM CI/SfB (31.549) X Architectural Folding System for Timber Doors Sliding Door Systems Contents Tommafold In Motion...2 System Overview...5 Architectural detail...6 Tracks
DOOR TECHNOLOGY ORDER CATALOG SECTION Tools & Accessories for Door Lock Installation
DOOR TECHNOLOGY ORDER CATALOG SECTION 03.11 Tools & Accessories for Door Lock Installation Table of Contents 03.11 Tools & Accessories for Door Lock Installation Door Slab Jig...03.11.5 Router Bits for
Operating Instructions and Parts Manual 10-inch Table Saw
Operating Instructions and Parts Manual 10-inch Table Saw Model 66 shown with optional extension table and legs, mobile base, and motor cover WMH TOOL GROUP 2420 Vantage Drive Elgin, Illinois 60123 Part
SYMBOLS AND FINISHES LEGEND
TARGET CONNECTINGS SYMBOLS AND FINISHES LEGEND SYMBOLS SHELF SAFELY LOCKED DURING TRANSPORTATION AND AT HOME. LOCK ANTI-TURNOVER LOCKING SYEM NORMS / PATENTS PHILLIPS / POZIDRIV N NEWTON PART.NO HEXAGONAL
Gota cassette. Version 1.10 Sun Protection AVZ 3G.1
Version 1.10 Sun Protection AVZ G.1 G.2 Sun Protection AVZ Version 1.10 Part number Description Paint finish Length in m 1 4211 772-090 Alu wall bracket 140 mm Mill finish 4211 772-008 Idem RAL 705 light
Tried-and-tested quality.
Tried-and-tested quality. Rugged single and full-extension drawer slides in tried-and-tested quality for top requirements. www.grass.at, info@grass.eu Roller slides Tried-and-tested quality and functionality.
Components Catalog. Mounting Systems. Version 18.01, updated: 05/25/2018
Components Catalog Mounting Systems Version 18.01, updated: 05/25/2018 1 Index IBC TopFix 200 Components... 5 Roof Tiles... 6 Roof Hook Alu-Vario S+... 6 Roof Hook Alu-Mammut S+... 6 Roof Hook Alu-Mammut
SERVICE MANUAL BMG-780 ULTRAPRO VERSION 1.0
SERVICE MANUAL BMG-780 ULTRAPRO VERSION 1.0 FOR MORE INFORMATION VISIT WWW.DIAMATICUSA.COM Diamatic 05/2013 This document is not contractual Design and technical specifications may be subject to changes
>> ACCESSORIES 5 2 METALPLAST-SOPRANA
1 CABIN 7 >> ACCESSORIES METALPLAST-SOPRANA srl 10090 BRUINO TO VIA VOLVERA 88/4 TELEPHONE 011-9086490 FAX 011-9086979 E-MAIL : metsopr@tin.it WWW.metalplast-soprana.com 2 GRAB HANDLES GRAB HANDLE CODE
TROLLA LEAVY 97 CM Lawn sweeper
TROLLA LEAVY 97 CM Lawn sweeper Artikel nr.: 1008 EN Operating manual 014/1 Dear Customer, Congratulations on your new Trolla product. We hope you will enjoy it. Checkout with your new Trolla product may
SELF-TAPPING SCREW FIXINGS
Denomination: Reference: FT ROS-en Date: 15/12/15 Revision: 3 Page: 1 of 14 T81 AUE T82 TCP T83 TFI CHARACTERISTICS ISO 1478 self-tapping thread. Require pre-drilling. Point Type F. Wide variety of head
STANDARD. Drawer runner program. Perfecting motion. blum.com
STANDARD Drawer runner program blum.com Perfecting motion Proven technology - built upon years of experience Blum testing criteria Cycle life/dynamic load capacity test Side pressure test 100,000 open/close
Air-supply elements. Air-supply elements MGE Flanged plate (p. 5-3) M12-1/4" (p. 5-4) Longitudinal end connector (p.
Air-supply elements MGE 13.0 5-1 Air-supply elements 1 2 3 4 5 6 7 8 Flanged plate (p. 5-3) Connection piece (p. 5-4) Connection screw fitting -1/4" (p. 5-4) Longitudinal end connector (p. 5-5) 9 11 12
FRP GATES MM08 FRP GATES Rev. 3 COMPOSITE SOLUTION PAGE 1
FRP GATES MM08 08.02.2016 Rev. 3 FRP GATES COMPOSITE SOLUTION PAGE 1 SUMMARY 1. USES AND CHARACTERISTICS... 3 2. EMPLOYMENT FIELDS... 4 3. MATERIALS... 5 3.1 TABLE OF PROFILES AND STRUCTURAL ACCESSORIES...
Air-supply elements. 5-2 MGE 13.1 Air-supply elements. 45x90. 45x90 (p. 2 41) Rexroth strut profiles can be used as compressed-air
5-2 MGE 13.1 Air-supply elements (p. 2 41) Air-supply elements Rexroth strut profiles can be used as compressed-air 19584 L L 2N L 3NVS (p. 2 40) 009732 L 7,9 cm 2 leads and reservoirs. The hollow chambers
25-200H. 12 Planer / Jointer. with Helical Cutterhead. Parts List.
25-200H 12 Planer / Jointer with Helical Cutterhead 4001824 Parts List www.rikontools.com CABINET ASSEMBLY PARTS EXPLOSION & PARTS LIST KEY NO. DESCRIPTION KEY NO. DESCRIPTION 1 Pan Head Screw M6x12 P25-200H-1
TECHN. DATA/ITEMS SUPPLIED APPLICATIONS ASSEMBLY. - Connection of profiles
MOUNTING BRACKET 45 Part N 21.1411/0 - GD Zn, powder coated, grey Weight 0,426 kg - Connection of profiles - For subsequent fitting of profiles into existing constructions, displacable in direction of
FINISTA SLIM ALUMINIUM SYSTEM. Finista Slim Aluminium System. > Multifunctional, Versatile, Simple
INIST SLIM LUMINIUM SYSTM inista Slim luminium System > Multifunctional, Versatile, Simple inista Slim luminium System The inista Slim luminium System is a multifunctional shelving program that will allow
ZARGEN AND INTEGRA ZARGEN & INTEGRA STEEL DRAWER SYSTEMS.
ZARGEN AND INTEGRA ZARGEN & INTEGRA STEEL DRAWER SYSTEMS Zargen and Integra steel drawer systems provide flexibility to please the most demanding design needs. www.grassusa.com Zargen and Integra Drawer
BAKA Protect Serie 2000 / Protect. BAKA Protect Series 2000 / The adjustable hinge system for timber entrance doors
Protect Serie 2000 / 4000 Protect BAKA Protect Series 2000 / 4000 The adjustable hinge system for timber entrance doors index BAKA Protect 2D BAKA Protect 2010 2D two-dimensionally adjustable up to 120
Kitchen Fittings Hanging Cabinets and Accessories
Cabinet hanger Knock-in version, load bearing capacity 130 kg/pair Depth adjustment Finish: Galvanized Concealed mounting of cabinet hanger behind the rear panel (Min. 16 mm free space required) Mounting
SIG Awning / Casement / Fixed Lite 100
TYPICAL FRAME ASSEMBLY - AWNING WINDOW 07-01 85720-2 GASKET EXT FL JAMB 100 BS201 (3471) HEAD HINGED 100 86064 TRIM FIN A 83963 SCREW SQ 8G X 1.0 PAN PP SS #2 85737 GASKET EXT FL TRANSOM 85720-1 86065
GALVANIZED SHED GREEN 2.3 X 2.3 X 1.9m
INSTRUCTIONS FOR: GALVANIZED SHED GREEN 2.3 X 2.3 X 1.9m MODEL NO: GSS2323G Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
STANDARD. Drawer runner program. Perfecting motion.
STANDARD Drawer runner program Perfecting motion STANDARD drawer runners Table of Contents Blum STANDARD drawer runners apply proven technology built upon years of experience to ensure a solid performance
TECTUS. The completely concealed hinge system
The completely concealed hinge system index te 210 3d up to 40 kg 4 te 310 3d up to 60 kg 5 te 510 3d up to 100 kg 6 TE 525 3D up to 100 kg 7 te 630 3d up to 200 kg 8 Cable set TECTUS Accessories 9 Fixing
AVENTOS HK-XS. Small fitting, great convenience. Technical data sheet.
Small fitting, great convenience Technical data sheet www.blum.com Order specification 2 1 8a 8b well suited for wall cabinets and larder units cabinet heights of 20 to 00 mm Interior depth of 12 mm minimum
SPECIAL EXTRUSIONS AND ACCESSORIES
PROFILE SYSTEM SPECIAL EXTRUSIONS s no i s u r t xe l a i c eps Import Belgium & Luxembourg Profilex s.a. 4A, Z.I. In den Allern L-9911 Troisvierges Tel: 00352/99 89 06 Fax: 00352/26 95 73 73 www.profilex-systems.com
DOOR TECHNOLOGY ORDER CATALOG SECTION SECURY Automatic Door Lock & Gripset Handle
DOOR TECHNOLOGY ORDER CATALOG SECTION 03.3 SECURY Automatic Door Lock & Gripset Handle Table of Contents 03.3 SECURY Automatic Door Lock & Gripset Handle SECURY Automatic Door Lock...03.3.5 Automatic
Sport-Thieme. Handball Goal. Assembly instruction. 3x2 m, Free-standing with Fixed Net Brackets
Assembly instruction Sport-Thieme Handball Goal Cat.-no.: 115 0953 2392905 239 2918 113 6500 239 2400 239 2413 3x2 m, Free-standing with Fixed Net Brackets Thanks for choosing Sport-Thieme equipment! In
McCue Bumper Installation Instructions
McCue Bumper Installation Instructions McCue 8" Bumper Tools Required: Saw with 10-12" blade Tape measure Flat head screwdriver Phillips screw driver Pencil or chalk line Drill with Philips driver bit
MEFA mounting accessories
MEFA mounting accessories Mounting accessories Base plates Page 5/2 Double holder Page 5/4 Height-adjustable suspensions Page 5/5 Pendular bolt joints Page 5/6 Trapeze hanger Page 5/7 Threaded hooks, distance
Copyright 2005 Valmont Industries, Inc.
Hose Drag TOPIVIEW OF CART Universal 1 Left Guidance Support (4" H.D.) 1732080... Left Guidance Sumort.. 16". H.D.)... 1732138 2 Right Guidance Support (4" H.D.)... 1732081 Right Guidance Support (6" H.D.)...
T360. Holders and Inserts - T-Cap. Features T333. Holders T335. Inserts T336. Clamping units T337. Sleeves for clamping units T338.
T358 T329 Holders and Inserts - T-Cap Features Holders Inserts Clamping units Sleeves for clamping units T-CAP Kits T333 T335 T336 T337 T338 T339 User Guide Comparison test results Surface finish Tool
C D. Secondary Glazing Fixed Unit. Do not scale 1 to 1. Frame 301 Face Fix. 19.8mm. Typical Elevation. Top hung over fixed.
Secondary Glazing Fixed Unit 19.8mm 14.0mm Frame 301 Face Fix Top hung over fixed Fixed unit Fixed unit using overlap section 310 Glazing available in 4mm 6mm and 6.4mm Laminate Glass o not scale 1 to
European cylinder 3 point lock. for aluminium and steel doors
European cylinder 3 point lock for aluminium and steel doors European cylinder 3 point locks for aluminium and steel doors HIGH SECURITY - Horizontally sliding lateral deadbolt. - Pre-setting for additional
Parts list Instruction guide Warnings Please read carefully before assembling and using product.
Parts list Instruction guide Warnings Please read carefully before assembling and using product. Jet Rail XL Part Number 27377 Tools required for assembly Hammer 9/16 Wrench 3/4 Wrench Ratchet 9/16 Socket
TOOLS/PROCESSING SERVICES TOOLS + PROCESSING SERVICES
TOOLS/PROCESSING SERVICES 7 TOOLS + PROCESSING SERVICES MINITEC PROFILE SYSTEM 583 TOOLS/PROCESSING SERVICES TOOLS s l oot TOOLS 584 MINITEC PROFILE SYSTEM BALL-HEADED KEY - Chrome plated, with handle
Enclosures, guards and partitions 6. Clamp Profiles Hangers Dual-Rod Mesh Hanger Lifting-Door System Door Security
Clamp Profiles Hangers Dual-Rod Mesh Hanger Lifting-Door System Door Security Application example system solutions for enclosures and guards Components for building enclosures and guards 1 2 3 4 5 7 194
Standoffs FISSO. Display with Elegance
Standoffs FISSO Display with Elegance Table of Contents Fisso Ghost... 1 Fisso Klipser... 2 Fisso Cubix... 3 Fisso Steel... 4 Fisso Punto... 5 Fisso Micro Alu... 6 Fisso Mix Alu 13mm... 7 Fisso Mix Alu
Standard drawer runner program
Standard drawer runner program i 230M Single extension, Blumatic self-closing drawer runners s: 250mm (10") to 650mm (26") 230 series drawer runners Cabinet profile Drawer profile Rear mount sockets available