THE RIMFIRE AND AIRGUN SCOPE MOUNT SPECIALISTS BKL TECHNOLOGIES
|
|
- Amie Walters
- 5 years ago
- Views:
Transcription
1 THE RIMFIRE AND AIRGUN SCOPE MOUNT SPECIALISTS
2 YOUR RIMFIRE & AIRGUN MOUNT SPECIALIST Finish off your latest rimfire or airgun & scope acquisition with mounts from designed to fit any standard 3/8 inch rimfire or 11mm airgun dovetails. AUTO-CENTERING STANDARD ON ALL SERIES The strong one piece clamping base allows easy mounting of 1 inch and 30mm rifle or pistol scopes. Patented Auto-Centering technology solves the problems created by varying mounting rail widths. Clamping legs move equally as the clamping screws are tightened keeping the scope centered on the rail CLAMP SPREADING CAPABILITY STANDARD ON ALL SERIES LEFT RELIEF CUT LEFT CENTERING CLAMP MOUNTING RAIL RIGHT RELIEF CUT SCREW AXIS RIGHT CENTERING CLAMP MOUNT/RAIL CENTERLINE Oversize mounting rails are no problem, the clamping screws can be switched to spreader holes to evenly push the clamping legs apart and allow the mount base to slide onto the dovetail. CLAMP SCREW IN SPREADER POSITION CLAMPING HOLES Airgunners and Rimfire shooters can now also benefit from the proliferation of Picatinny rail mounted optics and accessories with our Weaver/ Picatinny to dovetail adaptor mounts. mounts are manufactured from aircraft grade aluminum alloy on state of the art machinery in Texas. They can be purchased at your local retailer and online at SERIES DOVETAIL RISERS 200 SERIES 1 SCOPE RINGS 300 SERIES 30MM SCOPE RINGS 400 SERIES 14MM RAIL RINGS 500 SERIES PICATINNY ADAPTERS Weaver is a registered trademark of Blount and is used for reference only. Photographs, descriptions and other information are purely indicative. reserves the right to change, modify or discontinue products or features at any time.
3 100 SERIES DOVETAIL TO DOVETAIL RISER MOUNTS FOR 3/8 AND 11MM DOVETAILS 2 1 INCH RING MOU -166S 1 LONG DOVETAIL RISER MOUNT -166MB 1 LONG DOVETAIL RISER MOUNT -253MB 3 LONG CANTILEVER MOUNT WITH 1-5/8 CLAMPING LENGTH -253MB 3 LONG CANTILEVER MOUNT WITH 1-5/8 CLAMPING LENGTH -254S -168S 4 LONG DOVETAIL RISER MOUNT -254MB -168MB 4 LONG DOVETAIL RISER MOUNT -254HMB -HIGH -172MB 1-5/8 LONG DOVETAIL RISER MOUNT -254 D7MB 4 LONG DROP COMPENSATED CANTILEVER MOUNT WITH 1-5/8 CLAMPING LENGTH S 1-5/8 LONG DOVETAIL RISER MOUNT -257MB -180MB 0.6 LONG DOVETAIL RISER MOUNT -257S -180S 0.6 LONG DOVETAIL RISER MOUNT -257HMB.06 LONG DOVETAIL RINGS HIGH - M A D E I N T H E U S A
4 00 SERIES NTS FOR 3/8 AND 11MM DOVETAILS 3 30MM RING MOUN -274S -261MB 4 LONG RIMFIRE UNITIZED DOVETAIL MOUNT MB -260S -274MB -261S 4 LONG RIMFIRE UNITIZED DOVETAIL MOUNT S -260MB -263S DOVETAIL RINGS MB DOVETAIL RINGS MB DOVETAIL RINGS HMB HIGH HMB DOVETAIL RINGS - HIGH S OFFSET DOVETAIL RINGS S DOVETAIL RINGS D7MB 4 LONG DROP COMPENSATED DOVETAIL MOUNT MB OFFSET DOVETAIL RINGS - W W W. B K L T E C H. C O M
5 00 SERIES TS FOR 3/8 AND 11MM DOVETAILS 400 SERIES 1 INCH RING MOUNTS FOR 14MM DOVETAILS 500 SERIES DOVETAIL T0 WEAVER/PICATINNY ADAPTOR MOUNTS -302MB OFFSET DOVETAIL RINGS S -454MB -554MB -302S OFFSET DOVETAIL RINGS MB -460MB -558MB 4 LONG RIMFIRE ADAPTOR MOUNT -374S -566MB 1 LONG ADAPTOR MOUNT -354MB -463MB DOVETAIL RINGS MB -568MB 4 LONG ADAPTOR MOUNT -354S A I R G U N / R I M F I R E S P E C I A L I S T S
6 P.O. BOX 2478 FORT WORTH, TX FAX
Heavy Duty Green Laser Flashlight Foregrip USER MANUAL. FF35003
Heavy Duty Green Laser Flashlight Foregrip USER MANUAL www.fire-field.com FF35003 Engineered for high intensity, fast-paced situations, from extreme shooting sports to tactical training simulations to
More informationSPECIFICATIONS. The WM-6XL Long Wm. Malcolm Telescopic Riflescope Instruction Manual WARNING:
The WM-6XL Long Wm. Malcolm Telescopic Riflescope Instruction Manual SPECIFICATIONS Power: 6X Objective: 17mm Length: 30 in. Weight: 1.85 lb. (29.60 oz.) Eye relief: approx. 4.5 in. Reticle: Fine Crosshair
More informationHOMECREST STYLE SLING 3J300 Installation Instructions
1 HOMECREST STYLE SLING 3J300 Installation Instructions Before beginning, take careful note of how the chaise is assembled, particularly the adjustment hardware. An additional set of hands to help during
More informationModel 20: Home & Garden Cart
Model 20: Home & Garden Cart Parts List Step 1: A: Install two ¾ Bolts (C) through the rear trim piece on the Bottom Panel (S) and attach to Lock Nuts. (Lock nuts on bottom side) B: Place left Side Panel
More informationPergola Installation Instructions
Pergola Installation Instructions TOOLS REQUIRED HAMMER DRILL 1/2 MASONRY BIT PENCIL DRILL 3/16 DRILL BIT LEVEL SQUARE LADDER WRATCHET & SOCKETS RUBBER MALLET 2 TAPE MEASURE Column/Post Placement Table
More informationM14/M1A SHG-M Product Data Sheet MEDIUM WEIGHT FITS SAI INC. LOADED/NM MEDIUM WEIGHT BARRELS
1 Specifications: M14/M1A SHG-M Product Data Sheet MEDIUM WEIGHT Product Name: M14/M1A SHG-M Type: Mil-spec,Picatinny Rail M14/M1A Scope Mount Material: 6061 Alloy, Type II Hard Anodized Colors: Black,
More informationUSER MANUAL. LoPro Green Laser SM English
USER MANUAL SM25001 LoPro Green Laser English ABOUT SIGHTMARK Sightmark offers a wide range of products that include red dot scopes, reflex sights, rangefinders, riflescopes, laser sights, night vision,
More informationSide Winder R o u t e r L i f t.
Woodpeckers PRECISION WOODWORKING TOOLS Side Winder R o u t e r L i f t. INSTALLATION INSTRUCTIONS The wrench handle must be pointing left in order to fully insert or remove it. Lift Wrench Once fully
More informationCNC Router Parts PRO Machine Kit Cable Track Installation Instructions
1 1 X CABLE TRACK TRAYS & BRACKETS The cable track on the side of the system is supported by a metal tray (or multiple trays for longer systems such as a PRO4896). These trays hang from brackets on the
More informationAR15 SUPER SLIM AND ULTRA SLIM FREE FLOAT RAIL SYSTEMS
MUM066011803 AR15 SUPER SLIM AND ULTRA SLIM FREE FLOAT RAIL SYSTEMS Proudly Designed and Made in USA Super Lightweight, Flush Fitting, and Continuous with Flat Top AR15 Upper Receiver Features Integral
More informationAssembly Instructions 10 X 10 Aluminum Roof Support
Assembly Instructions 10 X 10 Aluminum Roof Support Aluminum Roof Support Bolt Package 16-5/16 X 2 ¼ SS Bolt 24-5/16 X 1 SS Bolt 40-5/16 SS Nylon Lock Nuts 16-5/16 SS Flat Washers 28-4 ½ Wood Screws 36-1
More informationMAG-CONV Basic, 48, 48R & Midline Front Mount
Parts Required: Tools Used: Mag Wheels Brakes Brake Rods Mounting Bracket Anti Tippers 7/16" Wrench Screw Driver Rubber Mallet 5/8 Wrench 5mm Allen Wrench Step Execution Figures 1 Remove front 5" total
More informationPlease read this owner s manual before use and keep it at hand for reference.
From the makers of INCRA JIG! Split fence design Micro adjustable Universal dust collection port Adjustable fence gap Compatible with all INCRA joint-making accessories CONTENTS CONTENTS Assembly........................
More informationWOODEN BOOTBLACK STAND CONSTRUCTION AND ASSEMBLY INSTRUCTIONS
WOODEN BOOTBLACK STAND CONSTRUCTION AND ASSEMBLY INSTRUCTIONS Designed and documented by Andrew "Bootdog" Johnson Release Notes: 17 September 2010 - Initial Release This work is licensed under a Creative
More informationCHARGE XLT GREEN LASER AND FLASHLIGHT USER MANUAL FF25012 / FF25012DE, FF25013 / FF25013DE
CHARGE XLT GREEN LASER AND FLASHLIGHT USER MANUAL FF25012 / FF25012DE, FF25013 / FF25013DE The Firefield brand has recently launched with products designed to maximize every intense moment. Originally
More informationALWAYS disconnect the power source before using the Betterley UNA-GAUGE with any power tool or machine!
Betterley UNA-GAUGE Thank you for purchasing the Betterley UNA-GAUGE. You will find the UNA-GAUGE provides quick adjustments and alignment of most tools and machinery with extreme accuracy. The versatile
More informationINSTALLING THE DRIVE SYSTEM
FIGURE 1. Bracket Installation on FRONT of carriage FIGURE 2. X-Axis Bracket Installed FIGURE 3. X-Axis Drive Assembly Installed The first step in installing the drive assemblies is to remove the sewing
More informationZ-DECK MANUAL. Z-Deck. Stable platform for electrophysiology and neuroscience Manual Version 2.1. Worldwide distribution
Z-Deck Stable platform for electrophysiology and neuroscience Manual Version 2.1 Worldwide distribution Prior Scientific, Ltd Prior Scientific, Inc Prior Scientific, GmbH Prior Scientific KK Cambridge,
More informationREV: 1.2 TRAMPOLINE MANUAL
REV: 1.2 TRAMPOLINE MANUAL TRAMPOLINE PARTS LIST: Item 8FT 10FT 12FT 14FT 16FT A 1 1 1 1 1 B 1 1 1 1 1 C 6 8 12 12 12 E 48 64 72 96 108 F 6 8 12 12 12 G 3 4 6 6 6 H 12 16 24 24 24 I 1 1 1 1 1 DIAGRAMS
More information(Shown on Short Riser) Power Button. Elevation. Eyepiece. Adjustment. Objective Lens. Windage. Adjustment. Battery Compartment
RED DOT The Vortex SPARC Red Dot Sight The compact Vortex SPARC red dot lends itself to a variety of firearm platforms including AR-15s, shotguns, and pistols. The modular three-piece base offers four
More informationAR MODEL 308 SUPERSLIM FREE FLOAT RAIL SYSTEM
MUM049011501 AR MODEL 308 SUPERSLIM FREE FLOAT RAIL SYSTEM Item No.: MTU020SSKA / MTU020SSKB / MTU020SSKC / MTU026SSKA / MTU026SSKB / MTU026SSKC & All Color Versions Proudly Designed and Manufactured in
More informationSection 3: Understanding Your Shop Drawings Reading Shop Drawing Abbreviations 60" O.A. stands for the overall dimension from the back wall to the front face of achieve your 60" overall you will set the
More informationCV1B Sliding Table Installation and Setup Guide
CV1B Sliding Table Installation and Setup Guide Tech Mark, Inc 7901 Industry Drive North Little Rock, AR 72117 tel (501) 945-9393 fax (501) 945-0312 www.tech-mark.com email: info@tech-mark.com The CV1B
More informationContinuum Frame Assembly Instructions
Continuum Frame Assembly Instructions Copyright January 1, 2017 Jim M. Bagley, GraceWood, Inc (Reproduction Prohibited) Version 2.2 Table of Contents Continuum Frame Table of Contents... i Warranty...ii
More informationM1 GARAND CASM. Removing the M1 REAR APERTURE SIGHT. Tools Required A thick [ but not too wide ] flat blade screw driver.
1 Removing the M1 REAR APERTURE SIGHT M1 GARAND CASM Tools Required A thick [ but not too wide ] flat blade screw driver. 1. Turn the elevation knob on the left side of the rear sight clockwise to raise
More informationOWNER S MANUAL CONTENTS. The only table saw fence with Automatic Positioning Control TM
The only table saw fence with Automatic Positioning Control TM OWNER S MANUAL Please read this owner s manual before use and keep it at hand for reference. Note: The INCRA TS II system consists of three
More informationSawStop. T-GlideTM. Fence System- Professional Series II OWNER S MANUAL
SawStop T-GlideTM Fence System- Professional Series II OWNER S MANUAL Warranty SawStop warrants to the original retail purchaser of a new T-Glide Fence System - Professional Series II from an authorized
More informationOWNER S MANUAL. But that s just half the story. The fence INCRA Miter Gauge really does work
From the makers of the INCRA JIG! Please read this owner s manual before use and keep it at hand for reference. Your new INCRA Miter Gauge at long last solves that frustrating problem all too familiar
More informationLegacy Woodworking Machinery a division of Phantom Engineering. The Legacy CNC. Assembly Manual
Legacy Woodworking Machinery a division of Phantom Engineering The Legacy CNC Assembly Manual New Orientation of the Legacy Step one: Re-orientation of the machine Remove the X-axis screw and supports.
More informationThermostat Conversion Kit Data Sheet CHOICE OF INSTALLATION
22-022 Thermostat Conversion Kit Data Sheet The Thermostat Conversion Kit was designed and packaged with the serviceman in mind. It allows a quick and easy replacement of competitive devices with a new
More informationPage 1. SureMotion Quick-Start Guide: LARSACC_QS 1st Edition - Revision A 03/15/16. Standard Steel Bolt/Screw Torque Specifications
R K C T I Repair Kit Product Compatibility Repair Kit # Linear Actuator Assembly # LARSACC-013 LARSACC-014 LARSD2-08T12BP2C (12-in travel) LARSD2-08T24BP2C (24-in travel) C P I R K 1 ea Ball Screw with
More informationIBM xseries 345 Third Party Slide Rail Kit
RackSolutions.com Patent(s) Pending IBM xseries 345 Third Party Slide Rail Kit Installation Instructions Kit P/N: 2URAIL-IBM-345 info@racksolutions.com Technical Support & Sales 903.453.0801 Kit Contents
More informationMPS3 with MGMount User manual
MPS3 with MGMount User manual 1 PRESENTATION The Aimpoint MPS3 (Multi Purpose Sight) is a passive electronic reflex collimator sight designed for use on medium or heavy weapons. Developed primarily for
More information#11179 Wellington ARBOR
#11179 Wellington ARBOR Assembly INSTRUCTIONS TOOLS NEEDED Tape Measure Variable Speed Drill with #2 Phillips Bit (recommended) or Phillips Screwdriver Hammer or Mallet ARBOR SIDE PANEL ASSEMBLY (Refer
More informationISO INTERNATIONAL STANDARD. Optics and optical instruments Specifications for telescopic sights Part 1: General-purpose instruments
INTERNATIONAL STANDARD ISO 14135-1 First edition 2003-12-01 Optics and optical instruments Specifications for telescopic sights Part 1: General-purpose instruments Optique et instruments d'optique Spécifications
More informationBOW-A-CONSTRICTOR BUCKEYE ARCHERY SOLUTIONS
BOW-A-CONSTRICTOR BUCKEYE ARCHERY SOLUTIONS User Guide: Bow-A-Constrictor Tuning Station Note: The following instructions begin with the power bar tongue set at approximately the 6th hole from the crank.
More informationHubble GOTO Installation Instruction (1.3, 04/30/2014)
Hubble GOTO Installation Instruction (1.3, 04/30/2014) 1. Preparation... 1 1.1 Tools required... 1 1.2 AZ GOTO Drive Parts List...1 1.3 ALT GOTO Drive Parts List... 1 2. The Azimuth motor drive installation...2
More informationHomecrest Style Sling Standard Chair Installation Instructions
1 Homecrest Style Sling Standard Chair Installation Instructions Tools Required Sheppard Hook Spreader Tool Rubber Mallet 7/16 Ratchet/Wrench OPTIONAL NEW HARDWARE PER CHAIR Although your existing Homecrest
More informationQuilting with The GraceHoop 2 TM
Quilting with The GraceHoop 2 TM T h e G r a c e H o o p Squared Table of Contents Customer Service Information............................. 2 Care, Finishing and Storage...............................
More informationDeckRail A Product of DeckRite LLC 3912 East Progress North Little Rock, AR Phone: (501) Fax: (501)
Disclaimer: Deck Rail Glass Railing Installation Guide This guide is not intended to replace a trained professional installer. The drawings and instructions contained within are for demonstration purposes
More information4Post and 2Post Rails for Dell PowerEdge R810
4Post and 2Post Rails for Dell PowerEdge R810 Patent(s) Pending 4Post Page 2 2Post Center Page 4 2Post Flush Page 6 Installation Instructions Kit P/N: 109-1737 109-1841 Kit Contents Kit Contents: (1) Right
More informationVersatrac Bypass Door Units, Conventional and Top Track, 300 and 400 Series
Versatrac Bypass Door Units, Conventional and Top Track, 300 and 400 Series TM Rough opening width (finished opening width plus 9/16") Notch for top track units (used as frame header) Rough opening height
More informationWind Turbine Experimenter s Kit User Guide
Wind Turbine Experimenter s Kit User Guide 42284 V0116 Cautionary and Warning Statements This kit is designed and intended for educational purposes only. Use only under the direct supervision of an adult
More informationSport-Thieme. Full-Size Goal. Assembly instructions. 7,32x2,44 m, Portable
Assembly instructions Sport-Thieme 7,32x2,44 m, Portable Art.-Nr.: 115 0793 257 7207 Full-Size Goal 0218214 2018 Sport-Thieme GmbH D-38367 Grasleben Germany sport-thieme.com info @sport-thieme.com Phone:
More informationA SRF/SERF A SRF/SERF
A1100-055SRF/SERF A1100-056SRF/SERF Remote Fill Assembly INSTALLATION INSTRUCTIONS **CRITICAL - MUST READ** This unit can only be used for new installations or tank level retrofits that allow access to
More informationSpecial Z-Axis Ballscrew Replacement
To replace Z-axis ballscrew without removing X-axis components When rebuilding an OmniTurn slide, all the precision components are replaced. The tooling plate and saddle are removed to gain access to the
More informationUSER MANUAL. ReadyFire G6 and IR6 Laser Sight SM25008 SM25009
USER MANUAL ReadyFire G6 and IR6 Laser Sight SM25008 SM25009 ABOUT SIGHTMARK Sightmark offers a wide range of products that include red dot scopes, reflex sights, rangefinders, riflescopes, laser sights,
More informationNON-ELECTRIC DOG FENCES
NON-ELECTRIC DOG FENCES Thank you! Thank you for ordering your non-electric dog fence kit from Pet Playgrounds. In less than a day you will have your very own personal dog park installed on your property.
More informationBHJ Products, Inc. Parts List & Instructions
Product Name: Lifter-Tru Kit for General Motors LS V8 Page 1 of 5 Kit Contents: 2x End Plates 2x Threaded Adjustment Sleeves 1x Front Angle Bracket 2x M10-1.5 x 65 Hex Head Bolts * 2x Angle Adapter Blocks
More informationMicro T-2 User manual
Micro T-2 User manual 1 PRESENTATION Aimpoint red dot sights are designed for the two eyes open method which greatly enhances situational awareness and target acquisition. Thanks to the optical design
More informationSURESHOT ARMAMENT GROUP SVD DRAGUNOV FREEFLOAT CHASSIS INSTALLATION MANUAL
SURESHOT ARMAMENT GROUP SVD DRAGUNOV FREEFLOAT CHASSIS INSTALLATION MANUAL www.sureshot-armament.com Prague, Czech Republic Patent Pending Hello, Thank you for choosing our SAG SVD DRAGUNOV Freefloat Chassis
More informationALUMINUM POLE VAULT STANDARDS SPECIFICATIONS
SPECIFICATIONS Specifications: All aluminum construction for superior corrosion resistance. Dual height scales provide English and Metric measurements ranging from 7' to 8'. Wide stance base for improved
More informationUSER MANUAL. ReadyFire G6 and IR6 Laser Sight SM25008 SM25009
USER MANUAL ReadyFire G6 and IR6 Laser Sight SM25008 SM25009 ABOUT SIGHTMARK Sightmark offers a wide range of products that include red dot scopes, reflex sights, rangefinders, riflescopes, laser sights,
More information#11178 Providence ARBOR
#11178 Providence ARBOR ASSEMBLY INSTRUCTIONS TOOLS NEEDED Drill with #2 Phillips Bit (recommended) or Phillips Screwdriver Ruler Hammer or Mallet ARBOR TOP ASSEMBLY (Refer to Drawing 1) (Make 2) On clean
More informationVortex. SrikeFire TM. Vortex Optics USA
Vortex SrikeFire TM www.vortexoptics.com Vortex Optics USA 2 VORTEX StrikeFire Red Dot Scope Manual Thank you for your purchase of the Vortex StrikeFire Red Dot scope! We are sure you ll be pleased with
More informationSave Scrap, Time and Money
COMPACT RIGID CUTOFF HOLDER wks with most all pick off and back finish attachments Quickchange Carbide Insert by Manchester Tools Multiple Designs f Flexibility Save Scrap, Time and Money Benefits of New
More informationToxonics Manufacturing, Inc Business Park Drive Mineral Point, MO
The strength of solid machined steel to protect and support the pin-point brilliance of fiber optic strands. Hunt the brush with no worry. Now availabe in.029 and.019 diameters. Toxonics sights are the
More informationINSTALLATION & ADJUSTMENT INSTRUCTIONS FOR LETHAL WEAPON MODEL 150 & MODEL 200 SIGHTS AND ACCESSORIES
Sight Assembly...................2 Mounting Sight on Bow: LW 1.........................2 LW 2.........................3 LW MAX.....................3 Set-Up and Adjustment: 2-Axis Leveling................4
More informationInstalling the Partridge RA Extension on Losmandy G11
Installing the Partridge RA Extension on Losmandy G11 Michael Herman July 20, 2015 Tools: 3/16 inch hex key (allen wrench) [If desired for DEC indicator ring friction improvement: flat screwdriver, and
More informationDoor window. Front door window, assembly overview
64-50 Door window Front door window, assembly overview 1 - Window channel Pushed onto flange 2 - Door window Removing Page 64-52 Adjusting Page 64-53 3 - Door 4 - Outer window channel Pushed onto flange
More informationbeat compromised stronger two-piece BASe. standards THAT WON T BE AND strength THAT CAN T BE FEATURED PRODUCTS
FEATURED PRODUCTS standards THAT WON T BE compromised AND strength THAT CAN T BE beat World s strongest lightweight bases. When it comes to industry standards, millett sets the bar. Our rings and bases
More informationClassic Roll Tarp. Installation Instructions. Attention Dealers: Please give this owners manual to the customer when the product is delivered.
Serving the Truck & Trailer Industry Since 1944 Classic Roll Tarp Attention Dealers: Please give this owners manual to the customer when the product is delivered. Call 800-535-9545 www.aeroindustries.com
More informationAXIOM Rifle Stock. Owner s Manual. Installation Instructions
AXIOM Rifle Stock Owner s Manual Page 1 Installation Instructions ATTENTION: Read and follow all instructions and warnings prior to installation and/or firing a Axiom equipped firearm. Take extra time
More informationRAPTOR WORKHOLDING NEVER BUILD ANOTHER FIXTURE FALL PRODUCT CATALOG. RaptorWorkholding.com
RAPTOR WORKHOLDING 2013 FALL PRODUCT CATALOG NEVER BUILD ANOTHER FIXTURE. RaptorWorkholding.com 1-800-824-8333 A FULL ACCESS PASS. Speed up your manufacturing by machining five, full sides of the workpiece
More informationALL SEASON PATIO COVER
ALL SEASON PATIO COVER 61 Where the All Season Patio Cover is to be attached to the home, create a level line showing where the top of the mounting rail is to be located. Install each section with the
More informationZODIAC CH 601 Series Kit Aircraft
ZODIAC CH 601 Series Kit Aircraft THE FOLLOWING IS A DRAFT MANUAL This manual has been written and published strictly for informational purpose. It has been prepared as a guide to facilitate the assembly
More informationN. 15th Street, Middlesboro, KY LOCK-N-ROLL INSTALLATION INSTRUCTIONS
1-800-248-7717 1002 N. 15th Street, Middlesboro, KY 40965 LOCK-N-ROLL INSTALLATION INSTRUCTIONS Congratulations on your purchase of a Mountain Tarp Lock-N-Roll tarping system. With tarping systems for
More informationThis manual will aid in the assembly of the FireBall V90 and FireBall X90. The assembly of both machines will be identical, unless specified.
This manual will aid in the assembly of the FireBall V90 and FireBall X90. The assembly of both machines will be identical, unless specified. Step #1 Lay all parts out to verify quantities. (2) 2 x 25-1/4
More informationSales & Service. JFK - Just For Kids. sasportonline.com. 135 Forestview Road 7879 Will Rogers Blvd.
Sales & Service sasportonline.com SA Sport (Canada) SA Sport (U.S.A.) 135 Forestview Road 7879 Will Rogers Blvd. P.O. Box 40 Fort Worth, Texas Orillia, Ontario USA 76140 Canada L3V 6H9 Telephone: (705)
More informationinstallation care & maintenance instructions lifecycledecking.com 25-year limited residential warranty 20-year limited commercial warranty
installation care & maintenance instructions lifecycledecking.com 25-year limited residential warranty 20-year limited commercial warranty Installation Instructions As with any building project, use proper
More information7141 & NATIONAL POLE VAULT STANDARDS SPECIFICATIONS
SPECIFICATIONS Specifications: This standard has a clamping system and a handle added for ease of operation. The clamping system is above the base pad protectors when in the lowest position and the tightening
More informationMicro T-1 User manual
Micro T-1 User manual 1 PRESENTATION Aimpoint red dot sights are designed for the two eyes open method which greatly enhances situational awareness and target acquisition. Thanks to the optical design
More information790XL Dado Jig Owners Manual Please Read Carefully!
790XL Dado Jig Owners Manual Please Read Carefully! 790XL Dado Jig Hardware List: Identify and verify that you have all of the hardware shown below prior to assembly. Tools needed for assembly: #2 & 3
More informationINSTALLATION INSTRUCTIONS
PARTS LIST ITEM PART DESCRIPTION QTY 73-A 503F 9MM 50G 5A 50E 505S 50H Connector Bracket Door Stops Support Bar Panel Glass Bracket Wall Mount Bracket Rollers Center Guide Recessed Finger Pull Fixed Panel
More informationOwner s Manual. From the makers of. Contents
Owner s Manual From the makers of INCRA JIG! Split fence design Micro adjustable Universal dust collection port Adjustable fence gap Compatible with all INCRA joint-making accessories Please read this
More informationGlue the ends onto the rafters following the instructions on the container of glue supplied with the kit.
29 Glue the ends onto the rafters following the instructions on the container of glue supplied with the kit. 30 Raise and position rafters using a measuring tape to center each rafter on the beams. Secure
More informationF i t t i n g t h e N e w L a n d i n g G e a r t o Y o u r S k y J i b V 1
F i t t i n g t h e N e w L a n d i n g G e a r t o Y o u r S k y J i b V 1 1 P a r t s L i s t : S t a n d a r d L a n d i n g G e a r U p g r a d e Product Code Parts + Spares Product Code Parts + Spares
More informationELEVEN COLLABORATIVE. CONFERENCE TOPS Assembly Instructions
ELEVEN COLLABORATIVE Table of Contents SUPPORT BRACE ASSEMBLY.... 3 TABLE BASE FRAME ASSEMBLY.... 4 LEG ATTACHMENT.... 5 TOP JOINING PLATE ASSEMBLY... 6 TOP CLAMP/TOP SPACER INSTALLATION.... 7 TOP PLACEMENT
More informationSTEVENS SUBPLATES. STEVENS ENGINEERING, INC. TOLL-FREE WEB FAX
STEVENS SUBPLATES Spacing of hole patterns on Stevens accessories is identical to the pattern on Stevens Subplates. Insertion of the pull dowels thru bushed holes in the accessory into corresponding bushed
More informationSTANDARD GRAVITY BOX TARP INSTALLATION
OPERATORS MANUAL Rev. 9.9.2016 STANDARD GRAVITY BOX TARP INSTALLATION J. & M. Mfg. Co., Inc. 284 Railroad Street - P.O. Box 547 Fort Recovery, OH 45846 Ph: (419) 375-2376 Fax: (419) 375-2708 www.jm-inc.com
More informationClassic Roll Tarp. Installation Instructions. Attention Dealers: Please give this owners manual to the customer when the product is delivered.
Serving the Truck & Trailer Industry Since 1944 Classic Roll Tarp Attention Dealers: Please give this owners manual to the customer when the product is delivered. Call 800-535-9545 www.aeroindustries.com
More informationMINIATURE METAL BELLOWS COUPLINGS
VERSATILE AND PRECISE. MINIATURE METAL BELLOWS COUPLINS SERIES MK 0.05 10 Nm THE ULTIMATE COUPLIN FROM 0.05 10 Nm BACKLASH FREE MINIATURE BELLOWS COUPLINS Areas of application: Ideal for precise transmission
More informationInTurn TAIL STOCK II
Specifications for the InTurn TAIL STOCK II accessory for the InTurn Indexing Turning 4 th axis The InTurn series is the only CNC mill accessory that provides both Indexing and coordinated 4 axis motion
More informationSYSTEM OWNER S MANUAL
From the makers of INCRA JIG SYSTEM OWNER S MANUAL W hat does an INCRA tool do better than any other? Just ask that question to any of the thousands of satisfied INCRA router table or table saw fence owners
More informationmila-wall (Series100) General Operating Instructions page 1 of 15
mila-wall (Series100) General Operating Instructions page 1 of 15 Step #1: Before setting up walls, lower adjustable leveling feet on each panel approximately 1". This will allow access to the threaded
More informationTrijicon SRS. Hybrid Technology
Trijicon SRS 2013 46 Trijicon SRS With a rugged, ultra-compact housing and unique optical geometry that eliminates tube-effect, the Trijicon SRS (Sealed Reflex Sight) is the most highly engineered, best
More informationInstallation, Maintenance & Parts Manual
Installation, Maintenance & Parts Manual Multi Tier Aluminum Support Stands Table of Contents WARNINGS General Safety..................... 2 Introduction................................ 3 Product Description..........................
More informationM14 MODULAR CHASSIS SYSTEM (MOD 1) INSTRUCTION MANUAL. West Springfield, MA Phone: (866) FAX: (413)
M14 MODULAR CHASSIS SYSTEM (MOD 1) INSTRUCTION MANUAL Troy Industries, Inc. WWW.TROYIND.COM West Springfield, MA 01089 Phone: (866) 788-6412 FAX: (413) 383-0339 Thank You M14/M1A MODULAR CHASSIS SYSTEM
More informationHydrajaws Safety Lifeline Tester
Hydrajaws Safety Lifeline Tester Operating Instructions HYDR AJAWS LIMITED Hydrajaws Safety Lifeline Tester 4 5 1 6 7 2 3 9 10 8 12 11 TECHNICAL SPECIFICATIONS Load Gauges Range available: Analogue: 0-25kN/lb/f
More informationASSEMBLY INSTRUCTIONS. enook Pro
ASSEMBLY INSTRUCTIONS enook Pro Product enook Pro for Monitors, 36w Part# EPM3616zz/xx Anthro Corporation 10450 SW Manhasset Dr. Tualatin, OR 97062 Toll-free: 800.325.3841 Fax: 800.325.0045 email: sales@anthro.com
More informationLathe. A Lathe. Photo by Curt Newton
Lathe Photo by Curt Newton A Lathe Labeled Photograph Description Choosing a Cutting Tool Installing a Cutting Tool Positioning the Tool Feed, Speed, and Depth of Cut Turning Facing Parting Drilling Boring
More information3CP Curve Plotting Tool for Model Railways
1 3CP Curve Plotting Tool for Model Railways Introduction - What is 3CP 3CP (3-point Curve Plotter) is a precise and unique mechanical curve plotting tool used for plotting and forming realistic looking
More informationM14 MODULAR CHASSIS SYSTEM (MOD 1) INSTRUCTION MANUAL. West Springfield, MA Phone: (866) FAX: (413)
M14 MODULAR CHASSIS SYSTEM (MOD 1) INSTRUCTION MANUAL Troy Industries, Inc. WWW.TROYIND.COM West Springfield, MA 01089 Phone: (866) 788-6412 FAX: (413) 383-0339 Thank You M14/M1A MODULAR CHASSIS SYSTEM
More informationElevation M16 A2-1 click=1 ¼ MOA M4-1 click=2 MOA
1 2 MUZZLE Elevation M16 A2-1 click=1 ¼ MOA M4-1 click=2 MOA UP When zeroing, adjust elevation with the front sight post and make windage adjustments with the rear sight The arrow that is stamped on the
More informationRED DOT #M Sheltered Wings
CROSSFIRE The Crossfire Red Dot Sight The Crossfire with daylight-bright red dot lends itself to a variety of firearm platforms including AR s, shotguns and pistols. The multi-height base offers different
More informationBEAST THE. Tube and Pipe Notcher Operating Instructions. Notches In Bends Straight Notches. Angled Notches. Offset Notches
Copyright (c) 2007 J D SQUARED INC. www.jd2.com THE BEAST Tube and Pipe Notcher Operating Instructions Notches In Bends Straight Notches Angled Notches PATENT PENDING Offset Notches Assembly After unpacking
More informationASSEMBLY INSTRUCTIONS FOR DESK & CREDENZA PRODUCTS
ASSEMBLY INSTRUCTIONS FOR DESK & CREDENZA PRODUCTS (1) COMPONENT LIST FOR DESK & CREDENZA PRODUCTS NOTE: Please count and inspect all pieces before disposing of any carton or packing materials. 24" x 72"
More informationCopyright Black Box Corporation. All rights reserved Park Drive Lawrence, PA Fax
Copyright 2004. Black Box Corporation. All rights reserved. 1000 Park Drive Lawrence, PA 15055-1018 724-746-5500 Fax 724-746-0746 JANUARY 2004 RF500A RF507A RF514A RF521A RF501A RF508A RF515A RF522A RF502A
More informationPosi-Bend ROTARY BENDING SOLUTIONS
Lowers tooling costs Reduces setup time Produces bends over 90 Bends UHS steel Eliminates cam tooling to produce over bends Flexible and interchangeable Reduces down time Requires lower tonnage than traditional
More informationMaking Simple Bookbinding Equipment
Tony Firman 20 1 2 19 Notes Tony Firman Tony Firman Bookbinding 18 3 : 2012 Tony Firman Bookbinding P.O. Box 507 Haslet, TX 76052 www.tonyfirmanbookbinding.com 4. When all the tapes have been pinned in
More information