SPW501 Thermal Framing SPW501. Appendix D Extended Anti-Finger Trap Stile Manual 2017 Thermal Framing

Transcription

1 SPW501 Thermal Framing SPW501 Appendix D Extended Anti-Finger Trap Stile Manual 2017 Thermal Framing

2 SPW501.APP.D.A01 SPW501 Thermal Framing Extended Anti-Finger Trap Stile General Arrangement - Extended AFT Door Stiles SPW CTR Pivot (i;\ SPW58888 I 63.5 \2Y Anti-Finger Trap 14

3 SPW501 Thermal Framing spwso1.app.d.ao2 Extended Anti-Finger Trap Stile Blank

4 SPW501.APP.D.B01 SPW501 Thermal Framing Extended Anti-Finger Trap Stile Section Identification - Extended AFT Door Stiles 48.5 LO AFT Door Stile ALUMINIUM OUTER ALUMINIUM INNER PERIMETER OUTER PERIMETER INNER OVERALL EXTERNAL PERIMETER POL YAMIDE UPPER POLYAMIDE LOWER lxx.- lyy t SPW588 SPW mm 178mm 330mm PAW273400S PAW956059S cm cm4 65 SPW58888 AFT Door Stile Anti-Finger Trap Trim SPWSAFTT RIGID PVC SPW5AFTT Anti-Finger Trap Trim

5 SPW501 Thermal Framing spwso1.app.o.so2 Extended Anti-Finger Trap Stile Blank

6 SPW501.APP.D.C01 SPW501 Thermal Framing Extended Anti-Finger Trap Stile Accessories - Bracketry Bottom Pivot Bracket Door Closer Top Bracket AFT

7 SPW501 Thermal Framing SPW501.APP.D.C02 Extended Anti-Finger Trap Stile Blank

8 SPW501.APP.D.D01 SPW501 Thermal Framing Extended Anti-Finger Trap Stile Deductions - Extended Anti-Finger Trap Stiles Single Door - Narrow Stiles Rail= W Glass= Rails - 10 Brush Strips = Rails w Double Door - Narrow Stiles 5 i----~=---"4-'r~a=il_=~w~-~3-=-67'--'-'/2=-.._5=-=2=.5"---' '--=52= =--5,..Rc...ca=il'--=-W:...:...=-3:.::.67'--'-/' "2~,1=-28= -=.5 ~ w Brush Strips= Rails+ 121 To Underside Of Header Bar t:r I -=- - SPW5282 ~~ SPW58888 Single Door - Wide Stiles.. [:.; -- Rail-W I Glass= Rails - 10 Brush Strips = Rails w -- ~ JJ \!I 7, ISPW ~! & Rail= W-444/2 Double Door - Wide Stiles Rail = W-444/2 Brush Strips= Rails +129 w

9 SPW501 Thermal Framing spwso1.app.o.002 Extended Anti-Finger Trap Stile Blank

10 SPW501.APP.D.E01 SPW501 Thermal Framing Extended Anti-Finger Trap Stile Preparation - Extended AFT Stile Bottom Rail SPW5DCBB Do Not Use This Hole... CD SPW5BBEX 70mm ~ ~- 10 SPW5BBEX SPW5DCBB

11 SPW501 Thermal Framing spwso1.app.d.eo2 Extended Anti-Finger Trap Stile Preparation - Top Rail Extended AFT Stile ~ + + I 0 I 32 I 7 END DRILLING DETAIL FOR RAIL Position the SPW5TBEX Plate With-in the Top Rail Using M6x12Ig C'sk M/C Screws SFSCM0612 Prior to Fixing the Closer Channel to the Rail AX End Load Top Arm Assembly r Fix Arm Channel To Top Rail With 3 No M6 C/Sink Screws SFSCS0819 No8x19Lg C'sk ST Screw Drill 04.5 Clearance In SPW580CT18 To Suit. Please Note Screws To Be Fitted Perpendicular To SPWSTBBPAFT J The Cleat Fixing Face 'f Tie Bar Plate ~~ MB Nyloc Nut (supplied with SDTIEROD) 2 End Holes In Rail To Be Countersunk To Suit M6 M/C Screws 3 Inner Holes To Be Drilled Hole SPW580CT18 SFSCS30 No8x25Lg C'skST Screw 2-0ff )SPWS 888 ~ I Safety tile ~ Stile Drilling Details 47 ~ Stile Drilling Details ;:!; When Using SRA022

12 SPW501.APP.D.E03 SPW501 Thermal Framing Extended Anti-Finger Trap Stile Preparation - Bottom Rail Extended AFT Stile Position the SPW5DCBB Plate With-in the Bottom Rail Using M6x12Ig C'sk M/C Screws SFSCM0612 Prior to Fixing the Pivot Casting to the Rail SFSCS0819 No8x19Lg C'sk ST Screw Drill 04.5 Clearance In SPW527CT38 To Suit Please Note Screws To Be Fitted Perpendicular To The Cleat Fixing Face 2-Holes 04.5 SFSCS30 No8x25Lg C'sk ST Screw 2-0ff ' Remove Nib to Clear SPW5DCBB ~! StHo DrilHog DotaHs (Ol 1 ~ M8 Nyloc N -~ Supplied wi SDTIEROD SPW5TBBPAFT Tie Bar Back Plate ALSO REFER TO PAGE SPW.E.05 f- 2- SFSPM0630 M6x30lg Countersunk To Suit Posi Drive Pan M6 M/C Screws Hd M/C Screw. Centre Fixing To be Fitted on Installation After Adjustment,~-+~,,_~ Self Tapper(SFSPS01) No1 Ox32Ig PH ST Screw ~ May be Used. l g_j SDTHW + + (0 N 1 32 I 7 END DRILLING DETAIL FOR RAIL 42 END MILLING DETAIL FOR STILE