Show us what you have! R40 OWNERS MANUAL BECOME LEGEND SHOOT YOUR FINISHED R40 SUBMIT YOUR PHOTOS
|
|
- Mercy Burns
- 5 years ago
- Views:
Transcription
1 Show us what you have! the hex gear hall of fame is reserved for only the finest examples of quality built systems. Think you deserve a place among the ranks? SHOOT YOUR FINISHED R40 BUILDS@HEX-GEAR.COM BECOME LEGEND SUBMIT YOUR PHOTOS R40 OWNERS MANUAL PREMIUM MICRO-ATX CHASSIS
2 Welcome to the club Firstly let us congratulate you on receiving your Hex Gear R40! Who are we? We are two industry enthusiasts who were simply not happy with the range of pc chassis on the market so decided to bring something new, sleek and exciting to the world. It has been an incredible journey taking this concept of a beautifully over engineered mix of steel and aluminium and releasing it upon the world! THE SMALL BITS A1 T-Nut A2 M8 x 18mm A3 M4 x 14mm A4 M4 x 10mm A5 M3 x 6mm A6 UNC 6-32 x 6mm B1 25mm standoff B2 Motherboard standoff C1 4mm flange nut C2 Anti vibration nut D1 Single sided foam tape X16 X8 X16 X8 X16 X9 X4 X12 X8 X8 X1 We are Nate & Hans Peder and we welcome you to our family Why Matx? In a world where everything is getting smaller we firmly believe that from the average user right up to pro gamer the Matx form factor can deliver. A1 A2 A3 A4 A5 A6 What is next? This is just the beginning of Hex Gear! With the launch of our first chassis now over we will be turning our time to developing new and exciting ideas to help take your computer and office space to the next level. B1 B2 C1 C2 D1 Note: It is advisable to read this entire manual through at least once before starting assembly. 1 2
3 1 FOAM TAPE GUIDE the following two stages include fixing the vibration tape 1 cut tape to size 2 remove paper backing 3 fix foam tape in place as shown in fig 1&2 3 do not fully tighten T-nuts (A1) A3x2 A1x4 B2x8 C2x4 A5x8 A3x2 2 4 repeat this stage on the window panel. 3 4
4 5 B2 x4 A5x8 7 B1x4 6 TIP attach your storage drives to the plate before installing plate to chassis 8 5 6
5 11 9 Profiles do not fully tighten T-nuts (C) A3x4 Profiles should slide free loosen T-nuts (A1) if needed A1x4 Cut-out should be on top A2x2 7 8
6 15 13 A1x4 A3x4 A3x4 A1x4 do not fully tighten T-nuts (A1) do not fully tighten T-nuts (A1) A2 x2 Profiles Profiles should slide free loosen T-nuts (A1) if needed 9 10
7 19 17 A6x9 Fully tighten all T-nuts (A1) and panels into place Cut-out should be on top A2x
8 21 23 A4x8 C1x8 do not over tighten
9 FINISHING UP now the fun can really start Place 1 your finished R40 on the clear acrylic pedestal feet provided and get ready to start planning your build. This is just the beginning Check out these extra parts to really set your R40 apart from the crowd If you are looking for inspiration check out hex-gear.com/hall-of-fame to see some amazing builds by other customers, professional modders and system builders. ACCENT PACKS The R40 accent pack is the fastest way to make your system that little bit more personal. Launching with 7 colours made from high quality 5mm acrylic matching your chassis to hardware is now a thing of the past. Change your rig in a year, just pick up a new accent pack rather than buying an entire new case! These packs are available in both standard and reverse matx. In fact, to convert your R40 to RmATX this is all you need! Available in the following colours THANK YOU FOR CHOOSING THE R40 Black White Blue Red Green Orange Purple Pink 15 16
10 HARD FEET KIT The stock R40 comes with two acrylic pedestal feet, but if you move your case around a lot, or have it standing on a rug, this kit would probably come in handy! This hard feet kit will lift the case up 20 mm from the ground, where the original feets lifts the case up 12 mm. FAQ Q : My side panel wont fit A : Check stage 12 & 18 for the correct orientation of the accent packs Q : My top/bottom panels are to tight to slide in place A : Loosen the acrylic dampeners and adjust the height Q : I am missing a part A : Contact us via Facebook or and we will send you a spare Q : Help I am stuck! A : Contact us via Facebook or and we will help walk you through MOUNTING PLATES We know not everyone has a workshop or tools to mount hardware so to go with the R40 we have also launched a selection of mounting plates. These will directly replace the stock plate and allow the easy fitting of the most common watercooling parts currently available on the market. NOTES 17
XSpc. Contents. Page 3-4. Component list. Preparing the back panel
H Cube+ Contents Component list Page - 4 Accessories Page 5-6 Preparing the base panel Page 7 Preparing the back panel Page 8 Preparing the front panel Page 9 Attaching the back panel Page 0 Attaching
More informationXSpc. Contents. Page 3-5. Component list. Preparing the back panel
H Tower Contents Component list Page 3-5 Accessories Page 5-6 Preparing the base panel Page 7 Preparing the back panel Page 8 Preparing the front panel Page 9 Attaching the back panel Page 0 Attaching
More informationor padded area, in the room that it is intended for. Approx assembly time: 30 minutes.
MODWAY HEADBOARD Thank you for purchasing the MOD-5365/5366/5367/5368/5369/5370/537/537/5373/5374/5375/5376/5377/ 5378/5379/5380/538/538/5383/5384/5385/5386/5387/5388/5389/5390/539/539/5393/5394/5395/5396/5397/
More informationMiniMax C26 Genius Combination This is not fancy packaging
MiniMax C26 Genius Combination This is not fancy packaging Quick start guide: unpacking and assembly Congratulations on your purchase of a new MiniMax C26 Genius combination machine! We ve put together
More informationOPERATING INSTRUCTIONS. for the double plate extension. Secabo Slide for TC5 and TC7
OPERATING INSTRUCTIONS for the double plate extension Secabo Slide for TC5 and TC7 Congratulations on purchasing a Secabo product! Please read these operating instructions carefully before using the product.
More informationPACKING LIST MACO V-5000
PACKING LIST MACO V-5000 PART QTY O.D. SIZE LENGTH DESCRIPTION CHECKLIST T47P 4 5/8.050 36 Aluminum Tubing _ T43P 1 7/8.050 48 Aluminum Tubing _ T18P 1 3/4.050 48 Aluminum Tubing _ T15P 1 5/8.050 48 Aluminum
More informationBOB SLAY (assembly instructions)
BOB SLAY (assembly instructions) Items included: 7 x Acrylic cutouts labeled A-G 1 x Acrylic IO Panel 1 x Acrylic locking plate of PCI cards 2 x Acrylic 5.25 spacers 2 x momentary switches (power/reset)
More informationBarn Door & Hardware Installation Guide
Barn Door & Hardware Guide INTRODUCTION Thank you for purchasing our hardware. Our barn door and hardware will add a stunning accent to your living environment and maximize its space. This manual covers
More informationJohn Deere 9570STS, 9650STS, 9660STS, and 9750STS Grain Tank Cross Auger Trough Liner EXOPLATE INSTRUCTION MANUAL
PLEASE READ THE ENTIRE INSTRUCTION SHEET BEFORE STARTING INSTALLATION. PLEASE REFER TO THE OPERATORS MANUAL FOR YOUR SPECIFIC COMBINE FOR PERTINENT SAFETY PRECAUTIONS THE TERMS. LEFT, RIGHT, FRONT, & REAR
More informationSINCE 1922 P UBLICATION N O
SINCE 1922 GARED SPORTS MICRO-Z SET-UP INSTRUCTIONS VERY IMPORTANT! READ INSTRUCTIONS CAREFULLY AND FOLLOW STEP BY STEP SET-UP PROCEDURE P UBLICATION N O. 5 5 1 7 5 2 9 1 6 Recommended tools and accessories.
More informationTitan Series Assembly Instructions
Titan Series Assembly Instructions Bill of Materials A(1) Vertical Post J(4) 5/8" Anchor Bolt B(1) Main Extension Arm K(4) Anchor Footing Rebar C(2) Parallel Linkage L(1) Anchor Footing Template D(1) H-Frame
More informationFirst Team Sports, Inc RoofMaster
First Team Sports, Inc RoofMaster Bill of Materials A (2)Roof/Wall Strut L (1) Rim Height Stickers W (4) "x 1 " Hex Bolt B (2)Perforated Tube M (1) 3/8"x13" Hex Bolt X (1) "x 8" Hex Bolt C (1) I-Rod N
More informationRoofMaster Assembly Instructions
RoofMaster Assembly Instructions Bill of Materials A (2)Roof/Wall Strut B (2)Perforated Tube C (1) I-Rod D (1) Main Sup. Channel E (1) Ext. Arm Support F (2) Upper Ext. Arm G (2) Lower Ext. Arm H (1) H-Frame
More informationA500 ASSEMBLY & INSTALLATION INSTRUCTIONS
ASSEMBLY & INSTALLATION INSTRUCTIONS 1 CONTENTS 2 Component Parts A B Canopy Mounting Plate C Cap (3) D Threaded Nipple E Threaded Standoffs (2) F Anchors (8) G #10 Screws (8) H Safety Cable (2) I Safety
More informationINSTALLATION MANUAL PBL-UMP
INSTALLATION MANUAL PBL-UMP Table of Contents Warning Statements... 4 Parts List... 5 Installation Tools... 5 Features... 7 Projector Preparation... 8 Bracket Installation... 10 Leveling the Mounting Bracket...
More informationJK Crusher Corners. *Includes ONE of the Hardware Kits (not both)
INSTALLATION INSTRUCTIONS INST-18-05-020_A JK Crusher Corners IMPORTANT: Thank you for purchasing this Poison Spyder product. Please read through this entire document before proceeding with installation.
More information2-PIECE STAIRWAY ASSEMBLY
REVISED 2/12/15 2-PIECE STAIRWAY ASSEMBLY STEP 1: LAY OUT THE RIGHT AND LEFT SIDE TOP AND BOTTOM RISER PANELS AS SHOWN IN FIGURE 1. BOLT THE SPLICE PLATE (#15114C for OSHA F SERIES; #15412C for BOCA U
More informationBone Box. Created by Phillip Burgess. Last updated on :31:04 PM UTC
Bone Box Created by Phillip Burgess Last updated on 2018-08-22 03:31:04 PM UTC Guide Contents Guide Contents Preparation Parts List Before assembly Assembly 1: Attach BeagleBone to Base Plate 2: Assemble
More informationF i t t i n g t h e N e w L a n d i n g G e a r t o Y o u r S k y J i b V 1
F i t t i n g t h e N e w L a n d i n g G e a r t o Y o u r S k y J i b V 1 1 P a r t s L i s t : S t a n d a r d L a n d i n g G e a r U p g r a d e Product Code Parts + Spares Product Code Parts + Spares
More informationInstruction Guide 4A90L
Instruction Guide 4A90L Kargo Master Rancho Cordova, CA 95742 800-343-7486 CustomerService@KargoMaster.com DATE: *PLEASE READ ALL INSTRUCTIONS AND WARNINGS PRIOR TO ASSEMBLING, INSTALLING, AND USING THIS
More informationGeneral Features. Low Profile. The SMART BOXX stands only 1.5 off of the bed of your truck so cargo space is maximized
General Features Low Profile. The SMART BOXX stands only 1.5 off of the bed of your truck so cargo space is maximized Two Sizes Short Box :74 L X 47 W X 7 T and Long Box 92 L X 47 W X 7 T All Aluminium
More informationADJUSTABLE BASKETBALL SYSTEM ASSEMBLY INSTRUCTIONS AND OWNER'S MANUAL
IRONCLAD SPORTS, INC HIGHLIGHT HOOPS ADJUSTALE ASKETALL SYSTEM ASSEMLY INSTRUCTIONS AND OWNER'S MANUAL MODEL: HIL885!! WARNING FAILURE TO COMPLY WITH ANY OF THE WARNINGS IN THESE INSTRUCTIONS MAY RESULT
More informationInstruction manual. ALOUETTE 3 For 600 size
Instruction manual ALOUETTE 3 For 600 size Dear customer, Thank you for purchasing a Smartmodel fuselage All our team wishes you a lot of fun for building and good flights. For 600 size or 50 Nitro power
More informationELECRAFT KXPD1 PLUG-IN KEYER PADDLE
Introduction ELECRAFT KXPD1 PLUG-IN KEYER PADDLE Assembly and Operating Instructions Revision B, July 27, 2011. Copyright 2011, Elecraft; All Rights Reserved The KXPD1 is a unique plug-in keyer paddle
More informationThis document will provide detailed specifications, BOM information, and assembly instructions for the Official Competition Field.
This document will provide detailed specifications, BOM information, and assembly instructions for the Official Field. Teams who do not need an official field should refer to the separate low-cost field
More informationFirst Team, Inc. WallMonster Series. Installation Instructions
First Team, Inc. WallMonster Series Installation Instructions Bill of Materials A (1) Wall Bracket B (2) Upper Extension Arms C (1) Lower Extension Arm Assembly D (1) H-Frame Backboard Mount E (1) 5/8
More informationFLOE DOCK FURNITURE WARNING ASSEMBLY INSTRUCTIONS
FLOE DOCK FURNITURE ASSEMBLY INSTRUCTIONS KIT P/N 510-00400-02 KIT P/N 510-00405-02 KIT P/N 510-00406-02 KIT P/N 510-00410-02 WARNING IT IS THE INSTALLER S RESPONSIBILITY TO PROPERLY INSTALL this chair
More informationD. Drill Bolt Holes Through Topper Shell and Bed Rails
A. Check Mounting Kit Check to make sure that all of the following items are included in the mounting kit. Call 515-272-4372 if you need to obtain a part from BrandFX. Double-stick tape (1 roll) White
More informationINSTALLATION MANUAL PBC-UMS
INSTALLATION MANUAL. PBC-UMS Premier Mounts 3130 E. Miraloma Avenue Anaheim, CA 92806 Phone: (800) 368-9700 Fax: (800) 832-4888 mounts@mounts.com www.mounts.com Rev. 01 PBL-110 Projector Mount Page 2 Installation
More informationMotorized M3 AX7200 Rotary-Style Gasket Cutter Operating Instructions
Motorized M3 AX7200 Rotary-Style Gasket Cutter Operating Instructions INTRODUCTION Congratulations! You are the owner of the finest rotary-style gasket cutter in the world. Originally developed and patented
More informationStep 1: Gather your parts!
Step 1: Gather your parts! Show All Items The #mearm was designed with economy in mind. It is understood that laser cutters aren't the most common tools but there are more of them out there now than
More informationInstructions for the installation of Handy Well Pump Models HWP-E, HWP and HWP-L. **Read thoroughly before you start!**
Instructions for the installation of Handy Well Pump Models HWP-E, HWP and HWP-L. **Read thoroughly before you start!** Model HWP-E Model HWP Model HWP-L Congratulations! You have purchased a quality hand
More informationAssembly Instructions & Operations Handbook. Congratulations! IMPORTANT: Save these instructions DO NOT DISCARD. 1 Year Limited Warranty
ranger Assembly Instructions & Operations Handbook Congratulations! You are the proud owner of the Ranger ATV Trailer. Your Ranger is partially knocked-down for easy shipment, assembly is required. Follow
More informationGETTING STARTED BE INSPIRED
GETTING STARTED BE INSPIRED 1 CONTENTS 04 Getting started 18 Inventor s Kit 26 CEEDuniverse 06 pi-top s Journey 20 pi-topos Overview 30 Additional Apps 08 What s in the box? 22 pi-topdashboard 34 Accessories
More informationMAGAZINE POUCH MANUAL
MAGAZINE POUCH MANUAL 1 If you need any support with your product please contact us at: productsupport@gugaribas.com.br SUMMARY STANDARD MAGAZINE POUCH PARTS 6 1. Installation on the belt 8 1.1 Attach
More informationSETUP INSTRUCTIONS If you would like to tell us about your experience with your setup instructions please us at
208 VK-233 General Layout 0 0 Plan View SETUP INSTRUCTIONS If you would like to tell us about your experience with your setup instructions please email us at info@classicexhibits.com 208 General Information
More informationD HANDRAIL. Doc No. A-39. Item Description. Hand hold for deck entry or exit equipment. Available in 0.6M, 0.9M, 1.2M, 1.5M and 1.8M heights.
D HANDRAIL 1 D Handrail 1 2 M10 Flat Washer 2 Materials: 3 M10x25mm Torx Bolt 2 Hand hold for deck entry or exit equipment. Available in 0.6M, 0.9M, 1.2M, 1.5M and 1.8M heights. 1. Refer to drawings for
More informationINSTALLATION INSTRUCTIONS FOR FRONT CASTING DECK RAIL Ranger
INSTALLATION INSTRUCTIONS FOR FRONT CASTING DECK RAIL Ranger TOOLS REQUIRED FOR INSTALLATION: Drill motor, (1) 5/16 inch drill bit, (1) 13/64 drill bit, (1) 3/16 inch hex wrench (1) 3/32 inch hex wrench.
More informationRBP-1215B-RX DODGE RAM QUAD CAB RX3
RBP-1215B-RX3 2002-2017 DODGE RAM 15-3500 QUAD CAB RX3 Passenger side RX-3 Side Step Drill Template Passenger side rear Modular Bracket (6) L Support Brackets Driver side rear Modular Bracket Driver side
More informationMODEL T28173/T28174 ROLLER TABLES INSTRUCTIONS
MODEL T28173/T28174 ROLLER TABLES INSTRUCTIONS FOR MODELS MFD. SINCE 10/17 For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Rails Rollers Reversible
More informationWizard of Oz (WOZ) Pinball Cliffy Protector Installation Instructions
Wizard of Oz (WOZ) Pinball Cliffy Protector Installation Instructions These instructions are provided for the installation of the 10 piece WOZ Cliffy protector set. Before starting, remove the lockdown
More informationBillet Pro Series shifter installation
Billet Pro Series shifter installation Holden Commodore VT-VZ / Pontiac GTO Chevrolet Lumina SS VT-VZ / Vauxhall Monaro VXR Kit contents: Along with the assembled shift body, you should also find the following
More informationSuperTrack Parts List
SuperTrack Parts List [indicates number for 6 lane tracks] SuperTrack Installation Instructions www.supertimer.com 1-800-654-2088 1 Track Instruction Manual (this booklet) 2 Start sections [3] Start Gate
More informationCommander 2 Lift Kit
Commander 2 Lift Kit Can-Am Commander 2010+ Part #: 5102204 Rev. 082416 491 W. Garfield Ave., Coldwater, MI 49036. Phone: 517-278-7768 E-mail: sales-rtpro@sporttruckusainc.com SAFETY WARNING RT Pro UTV
More informationINSTRUCTIONS AND PARTS LIST POWER HAMMER
INSTRUCTIONS AND PARTS LIST POWER HAMMER DAKE (Division of JSJ) 724 Robbins Road Grand Haven, Michigan 49417 616.842.7110 Phone 800-937-3253 616.842.0859 Fax 800-846-3253 Web: www.dakecorp.com E-mail :
More informationMotorized Tower Raising System Manual
Motorized Tower Raising System Manual Introduction and Safety Guidelines Important! Read through the manual in its entirety prior to assembly and installation of the motorized tower raising system. WARNING:
More informationMODULAR BUMPER INSTALLATION MANUAL
MODULAR BUMPER INSTALLATION MANUAL Parts List* 1 Center section 1 Side extension, passenger / right 1 Side extension, driver / left 1 Side cap, passenger / right 1 Side cap, driver / left 1 Brush guard,
More informationJK ADVENTURE CARRIER INSTALLATION INSTRUCTIONS
JK ADVENTURE CARRIER INSTALLATION INSTRUCTIONS TOOLS NEEDED 5/32 allen key 7/32 allen key 3/4 wrench or socket 1 1/2 Socket 11mm wrench or socket 1/2 wrench or socket HARDWARE 7-1/4 x 20 x 3/4 button head
More informationWHEN DISASSEMBLING ALUMINUM EXTRUSION, TIGHTEN ALL SETSCREWS AND LOCKS TO PREVENT LOSS DURING SHIPPING
Order #xxxxx - Sacagawea - VK-23 - General Layout Step 0 Plan View 0 202 Page of 4 Order #xxxxx - Sacagawea - General Information Step 2 Using You Set-up Instructions: The Visionary Designs Set-up Instructions
More informationTail Vise. Installation Instructions. (revised 10/11/2017)
Tail Vise Installation Instructions (revised 10/11/2017) Lie-Nielsen Tail Vise Instructions Table of Contents page About Your Tail Vise 3 Parts List 4 step 1. Prepare Your Bench Top 5 step 2. Prepare the
More informationBike Locker Model DBL1 & DBL2
Bike Locker Model DBL1 & DBL2 DBL1 & DBL2 are constructed of 99% recycled steel and is available in 20 standard powder coat colors or a galvanized finish. DBL1 & DBL2 store 1 or 2 bikes effortlessly and
More informationOWNER S MANUAL. Hercules Diamond Basketball System WELCOME TO THE FAMILY OF HERCULES OWNERS
OWNER S MANUAL Warning! Do not slide, climb, or play on pole.! Keep organic material away from pole base. Grass, litter, etc. could cause corrosion and /or deterioration.! Check pole system twice a year
More informationWHITE - Accessories. Series 500 Greenhouse Kit w/blackout System, Ventilation & Evaporative Cooling
Series 500 Greenhouse Kit w/blackout System, Ventilation & Evaporative Cooling WHITE - Accessories 2016 Growers Supply All Rights Reserved. Reproduction is prohibited without permission. Revision date:
More informationDepending on the size you ordered you will have either 5 Foot sections which will build the 10 Foot frame or 6 Foot sections which will build the 12
XL Quilting Frame 1 Depending on the size you ordered you will have either 5 Foot sections which will build the 10 Foot frame or 6 Foot sections which will build the 12 Foot frame Printed 2 June 2014 Updated
More informationC70 Window Roller Repair Taken from: Heres the problem:
C70 Window Roller Repair Taken from: http://www.volvospeed.com/vs_forum/topic/115086-how-to-c70-window-rollers-permanent-fix/ Heres the problem: This happened to two separate window assemblys on my c70
More informationCNC Router Parts. PRO Series Machine Expansion Instructions
CNC Router Parts Tools List The following tools will be used during assembly of your machine: Metric Ball End Allen Wrench Set - 3mm, 4mm, 5mm, 6mm 6mm Ball-End Hex Driver Attachment for Drill/Impact Driver
More informationMAXIMA TRADITIONAL JUST ASK FOR THE WOOD GATE HARDWARE QUICK & EASY TO INSTALL AVOID TYPICAL INSTALLATION PROBLEMS END USER SATISFACTION
ORNAMENTAL GATE HARDWARE JUST ASK FOR THE MAXIMA TRADITIONAL QUICK & EASY TO INSTALL Patent No. 4,871,203 No. 4,690,440 j j j j j PRE-ASSEMBLED You do not have to put it together EASIEST INSTALLATION Two
More informationAssembly Instructions & Operations Handbook
Assembly Instructions & Operations Handbook Congratulations! You are the proud owner of the Explorer ATV Trailer. Your Explorer is partially knocked-down for easy shipment, assembly is required. Follow
More informationSTEP 1 STEP 2 LEVELER KIT OPTION MOBILE CASTER KIT OPTION
B SERIES INDUSTRIAL BENCHES TOOLS REQUIRED FOR ASSEMBLY Socket set, Open end wrench set, Cordless drill with 3/8" socket bit (Magnetic recommended). BEFORE ASSEMBLY Read through the assembly instructions
More informationThis document will provide detailed specifications, BOM information, and assembly instructions for the Official Competition Field.
This document will provide detailed specifications, BOM information, and assembly instructions for the Official Competition Field. Teams who do not need an official field should refer to the separate low-cost
More informationV-MOTION LITE USER GUIDE. Rat Rig All rights reserved.
V-MOTION LITE USER GUIDE Rat Rig 2017. All rights reserved. PACKAGE CONTENTS 1 1x V-Motion Motor 2 1x Belt 3 1x 3mm Hex Key 4 1x AA Battery Pack (for 8x AA batteries)* 5 1x V-Motion Controller 6 2x Knob
More information"The Stick" Assembly Instructions
Back to Main Page "The Stick" Assembly Instructions In Japanese (pdf): right click and save target as. Introduction: Hello and thank you for buying a Stick chassis from TCS. We appreciate your business
More informationShowpiece Cabinet Integrated Stand For 32" - 52" LCD HDTV
Showpiece Cabinet Integrated Stand For 32" - 52" LCD HDTV Installation and Assembly Instructions 2009 Incredible Technologies Inc. Version 0109 Showpiece Cabinet Integrated Stand for 32" - 52" LCD HDTV
More informationJK TrailGate JK TrailGate
INSTALLATION INSTRUCTIONS INST-17-66-010_A JK TrailGate IMPORTANT: Thank you for purchasing this Poison Spyder product. Please read through this entire document before proceeding with installation. If
More informationRH-412 STEEL DOORS INSTALLATION INSTRUCTIONS
RH-412 STEEL DOORS INSTALLATION INSTRUCTIONS By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side.
More informationJEEP JK ( 3 DOOR ) SLIMLINE II - FULL TRAY EXTREME RACK KIT
JEEP JK ( 3 DOOR ) SLIMLINE II - FULL TRAY EXTREME RACK KIT FAJK004 / KRJW016T INSTALL TIME: 2 Hours NOTE: Your Jeep JK (3 Door) Extreme Roof Rack Kit consists of four boxes. (1) the Tray, (2) the Roll
More informationJK Rear Crusher Flares
INSTALLATION INSTRUCTIONS INST-17-05-010_A JK Rear Crusher Flares IMPORTANT: Thank you for purchasing this Poison Spyder product. Please read through this entire document before proceeding with installation.
More informationINSTALLATION INSTRUCTIONS RH 412 STEEL DOORS
By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side. Note: Having the hood open makes the job
More informationShapeoko XXL Assembly Guide
Shapeoko XXL Assembly Guide 04/27/2016 XXL Packing LIst Item Qty Description Y-Carriage (left) 1 Y-Carriage (right) 1 X/Z Assembly 1 40 Rail 3 1 rail has mounting holes for controller Wasteboard Half 2
More informationFor Wallbed models: KING SIZE INSTRUCTION BOOKLET #C1 Watch step by step installation instructions at: https://www.wallbedsbywilding.com/wallbed-installation-studio-series/ WARNING! ALL MURPHY/WALLBED
More informationSAFETY THIS PRODUCT IS FOR OFFROAD USE ONLY. ALL LIABILITY FOR INSTALLATION AND USE RESTS WITH THE OWNER.
SAFETY Your safety and the safety of others is very important. In order to help you make informed decisions about safety, we have provided installation instructions and other information. These instructions
More informationThe ability to make basic voltage and resistance measurements using a digital multimeter
Congratulations on your purchase of a new OneShot chassis! The PC01 OneShot combines a rugged enclosure, power supply, and discrete instrument DI in a compact 1/4U package. A few minutes of assembly are
More informationLaser Guided Rod Wrapper
Laser Guided Rod Wrapper Operating Manual V 1.2 Quinchat Rods LLC Machines for Makers of Bamboo Rods www.quinchat.webs.com V 1.2 page 1 V 1.2 page 2 Table of Contents 1. Laser Guided Rod Wrapper Features
More information6 Foot/ 1800mm Aisle Width Net-Contain Aisle Containment for N-Type and S-Type Cabinets
6 Foot/ 1800mm Aisle Width Net-Contain Aisle Containment for N-Type and S-Type Cabinets Panduit Corp. 2016 INSTALLATION INSTRUCTIONS Page 1 of 36 Component Guide for Doors Dual Sliding Containment Door
More informationOne Piece LSD/Vector Pads from TIE DOWN ENGINEERING Easier installation with 70% fewer parts Lower cost with competitive pricing
NEW! One Piece SD/ector Pads from TIE DOWN ENGINEERING Easier installation with 70% fewer parts ower cost with competitive pricing Do the Math! Compare material and labor cost with the New SD and ector
More informationCustomers should turn off the machine with the power cable and USB data cable pulled down from it when installing or removing extruder.
INSTALLATION &REMOVAL of the EXTURDER Customers should turn off the machine with the power cable and USB data cable pulled down from it when installing or removing extruder. I.How to disassemble the extruder
More informationAdjustable Mount for 2.4-GHz WLAN Yagi Antenna (AIR-ACC2662)
Adjustable Mount for 2.4-GHz WLAN Yagi Antenna (AIR-ACC2662) This mount is designed to be used with the AIR-ANT1949 andair-ant2410y-r 2.4-GHz yagi antennas. The mount is designed to adjust the antenna
More informationASSEMBLY INSTRUCTIONS RIGHT & LEFT HAND "J" TABLE
ASSEMBLY INSTRUCTIONS RIGHT & LEFT HAND "J" TABLE (1) COMPONENT LIST FOR RIGHT & LEFT HAND "J" TABLE NOTE: Please count and inspect all pieces before disposing of any carton or packing materials. 24" x
More informationHILGARD Part Number Spectrum Lane ~ Missoula MT ~
HILGARD Part Number 20121 7100 Spectrum Lane ~ Missoula MT 59808 800.791.8056 ~ www.spectrumproducts.com 20121 Rev A You have purchased a Spectrum Products Hilgard Guard Chair. Providing the unit is installed
More informationfirepickdelta Assembling the Frame Instructions for the assembling the frame for the FPD. Written By: Neil Jansen
firepickdelta Assembling the Frame Instructions for the assembling the frame for the FPD. Written By: Neil Jansen 2017 firepickdelta.dozuki.com Page 1 of 10 INTRODUCTION Inventory your parts first and
More informationAM8 Printer A metal frame for your Anet A8 By Pheneeny v1.0 April 20, 2017
AM8 Printer A metal frame for your Anet A8 By Pheneeny v1.0 April 20, 2017 Please read this entire document before printing parts or building this frame Disclaimer: This guide is for informational purposes
More informationNancy s Knit Knacks LLC 4 Yard Option Upgrade Kit Assembly Instructions and User Manual
Nancy s Knit Knacks LLC 4 Yard Option Upgrade Kit Assembly Instructions and User Manual Thank you for purchasing our 4 Yard Option (4YO) Upgrade Kit. To install this upgrade you are simply going to assemble
More informationJEEP XJ CRUSADER ROCK SLIDERS INSTALL INSTRUCTIONS
JEEP XJ CRUSADER ROCK SLIDERS INSTALL INSTRUCTIONS Please read the mounting instructions below carefully before attempting to install. Thank you for purchasing your new armor from JcrOffroad! Checkout
More informationinstallation guide
JANUS INTERNATIONAL 1 866 562 2580 w w w. j a n u s i n t l. c o m 2000 2500 3000 installation guide RIGHT DRIVE END SHOWN LH OPPOSITE LEFT TENSION END SHOWN RH OPPOSITE PUSH-UP OPERATION 2000 2500 3000
More informationHigh Rise Sit-Stand Desk Converter
High Rise Sit-Stand Desk Converter Assembly Instructions for Model DC350 Patent No. 9,332,839 PRE-ASSEMBLY Please read all instructions before beginning assembly. We strongly recommend you watch the video
More informationTools required for basic assembly/checking
... and for choosing RKR BMX, you have chosen wisely! RKR is very different from other mini bike brands on the market; It was designed by riders, for riders and is the product of many years experience
More informationIntroduction: Tools:
GrimmSpeed Install Guide Series Installing the Lightweight Battery Mount Kit - Subaru 08-18 WRX/STI Updated 5/25/18 STOCK OEM GRIMMSPEED Introduction: This guide will illustrate the installation of the
More informationThe Useless Machine. DIY Soldering Edition. Instruction Guide v0004
The Useless Machine DIY Soldering Edition Instruction Guide v0004 TM For the best outcome, follow each step in order. We recommend reading this guide entirely before you get started. Tools required: Soldering
More informationMaintenance and other important non-personal injury and non-material damage instructions or statements that should be observed.
VIGO INDUSTRIES INSTALLATION GUIDE FOR SHOWER ENCLOSURE ()! SAFETY PRECAUTIONS This Installation Guide uses the following symbols to indicate important information. Always observe the instructions indicated
More informationMK52 Series ULTRA-LOW FREQUENCY VIBRATION ISOLATION WORKSTATION ASSEMBLY AND OPERATION INSTRUCTIONS
MK52 Series ULTRA-LOW FREQUENCY VIBRATION ISOLATION WORKSTATION ASSEMBLY AND OPERATION INSTRUCTIONS i Information contained in this document is subject to change without notice and does not represent a
More informationAssembly Instructions & Operations Handbook
Assembly Instructions & Operations Handbook Congratulations! You are the proud owner of the Super Explorer ATV Trailer. Your Super Explorer is partially knockeddown for easy shipment, assembly is required.
More informationLA502 Assembly guide Main PCB Resistors - (2)
LA502 Assembly guide Safety warning The kits are main powered and use potentially lethal voltages. Under no circumstance should someone undertake the realisation of a kit unless he has full knowledge about
More informationLIGHT BEAM ANTENNA MaxRange Antenna Series Assembly Instructions MaxRange Plus Digital / High Definition Television Antennas
LIGHT BEAM ANTENNA MaxRange Antenna Series Assembly Instructions MaxRange Plus Digital / High Definition Television Antennas Assembly Instructions 1 MaxRange Plus Antenna These instructions will lead you
More informationAssembly Instructions Beta Prusa Standard & Deluxe
13/11/12 Assembly Instructions Beta Prusa Standard & Deluxe 3D Printer Version 1.0 Date 13/11/12 Page 1 / 66 General data about the assembly instructions for an incomplete machine according to appendix
More informationINSTALLATION INSTRUCTIONS CONTOURED LIGHT BAR APPLICATION: CHEVY EQUINOX/ GMC TERRAIN PART NUMBERS: ,
INSTALLATION INSTRUCTIONS CONTOURED LIGHT BAR APPLICATION: 2010-2014 CHEVY EQUINOX/ GMC TERRAIN PART NUMBERS: 32-21020, 32-21025 ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1 1 CONTOUR BAR TORQUE WRENCH 2 1
More informationSAVVY OFF ROAD GAS TANK SKID INSTALLATION INSTRUCTIONS
It is best to work with a fuel tank that has the least amount of fuel in it as possible. Thank you for purchasing the best skid on the market. Please follow these instructions and your installation should
More informationThank you for your order
Installation Guide Thank you for your order Ph: 09-9133110 Fax: 09-9133113 5 Smales Road. East Tamaki, Manukau PO Box 58031 Greenmount, Manukau 2013 AUCKLAND // WELLINGTON // CHRISTCHURCH www.bathroomdirect.co.nz
More informationElecraft AF1 Audio Filter Enclosure
Elecraft AF1 Audio Filter Enclosure by W8FGU Elecraft AF1 Audio Filter Mounted in the AF1 Enclosure (Courtesy of Ron D Eau Claire). The AF1 enclosure is made of Lexan, a polycarbonate, which is very strong.
More informationSuper Closeout Deals
Super Closeout Deals Fastronix dealers as well as the general public are welcome to purchase items from our Super Closeout Deals page. You will find a wide assortment of products PRICED TO MOVE! If you
More informationAssembly instructions. 6x4. Model GH1354A. 6x6. Model GH1357A. 6x8. Model GH1360A. 6x10. Walk-in Greenhouse. Model GH1363A
ssembly instructions x Model GH x Model GH7 x8 Model GH0 x0 Model GH Walk-in Greenhouse Statement ear Customer! May we congratulate you on your new Greenhouse. We feel sure that by following the detailed
More information