Thyristors Solid Protection Device Bidirectional transient voltage suppressors. Symbol Parameter Value Unit
|
|
- Theresa Hodges
- 5 years ago
- Views:
Transcription
1 PxxxxSB Series Thyristors Solid Protection Device Bidirectional transient voltage suppressors Features For surface mounted applications to optimize board space Low profile package Bidirectional crowbar protection Low leakage current : I = 5uA max Low on-state voltage Low Capacitance Response Time is < 1us YD/T 95 IEC YD/T 993 ITU K.2/21 YD/T 182 TIA-968-A GR 189 Intra-building Solid-state silicon technology Meets MSL 1 Requirements ROHS compliant WeiPan technology Ordering Information Device Qty per Reel Reel Size PxxxxSB Inch Schematic Diagram Maximum Ratings and Electrical Characteristics Symbol Parameter Value Unit I PP 1/1 us 8 Non-repetitive peak pulse current 5/31 us 15 A 8/2 us 25 V PP Non-repetitive peak pulse voltage 1/7us 4 V V ESD ESD Rating per IEC61-4-2: Contact 8 KV Air 15 Ts Storage temperature range -4 to +15 Tj Maximum junction temperature 15 Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied,damage may occur and reliability may be affected. *Other voltages may be available upon request.
2 Electrical Parameters (T amb =25 ) V RM I RM V BO I BO V T I T C O I H Type Min. Max. Max. Max. Tpy. Tpy. V μa V ma V A pf ma P8SB P3SB P64SB P72SB P9SB P11SB P13SB P15SB P18SB P2SB P23SB P26SB P31SB P35SB P4SB P45SB P5SB Notes: All measurements are made at an ambient temperature of 25. I PP applies to -4 through +85 temperature range. Off-state capacitance (C O) is measured at 1 MHz with a 2 V bias and is typical value. Symbol Parameter I V RM Stand-off voltage V BR Breakdown voltage V BO I BO Switching Voltage Break over current Ih IBO I RM I PP Leakage current at VRM Peak pulse current VBO VRWM IR IR VRWM VBO V I H Holding current IBO Ih V T On-state Voltage at I T C O Off-state Capacitance
3 Typical electrical characterist applications Rating and Characteristics Curves 1 %I PP Repetitive peak current Tr=rise time(us) Tp =pulse duration time (us) 1.8 C[VR]/C[VR=5V] F=1MHZ VRMS=2V t r t p Fig.1 Pulse Waveform (5/31us) VR(V) Fig. 2 Relation Variation of Junction Capacitance Versus Reverse Voltage Applied (Typical Values) 4 I TSM(A) F=5HZ 1 IT(A) t(s) 1.E-2 1.E-1 1.E+ 1.E+1 1.E+2 1.E+3 Fig.3 Non Repetitive Surge Peek On-State Current Versus Overload Duration 1 VT(V) Fig.4 On-State Voltage Versus On-State Current (Typical Values) I H(TJ)/I H[] V BO[Tj]/V BO[] Fig.5 Relative Variation of Hold Current Versus Junction Temperature Fig.6 Relative Variation of Break Over Voltage Versus Junction Temperature
4 Typical electrical characterist applications Rating and Characteristics Curves 1.E+3 IR[Tj]/IR[] VR=243V Z TH(j-a)/R TH(j-a) 1.E E E+.2.1 Tp(s) E-2 1.E-1 1.E+ 1.E+1 1.E+2 1.E+3 Fig.7 Relative Variation of Leakage Current Versus Reverse Voltage (Typical Values) Fig.8 Variation of Thermal Impedance Junction To Ambient Versus Pulse Duration
5 Package information Mechanical Data Case: Case Material: Molded Plastic. UL Flammability Classification Rating 94V- Polarity Indicator: Cathode Band (Note: Bi-directional devices have no polarity indicator.) Weight:.3 ounces,.96 gram C MARKING WPM A Millimeters Inches DIM Min Nom Max Min Nom Max A B B C F D E G D G F E Reel Dim B P G K E D P2 T F A D1 W B B1 K P1 A B B1 D D1 E F K T W P P1 P Dimension is in mm Leader and Trailer Direction of Feed Tape Leader No Components 3 components in length Components Tape Trailer (Connected To Reel Hub) No Components 5 components in length The LEADER is a minimum of 3 components in length and it consists of empty cavities with sealed cover tape The TRAILER is a minimum of 5 components in length and it consists of empty cavities with sealed cover tape.
SMP100LC-65 TRISIL FOR TELECOM EQUIPMENT PROTECTION
SMP1LC TRISIL FOR TELECOM EQUIPMENT PROTECTION FEATURES Bidirectional crowbar protection Voltage range from 8V to 4V Low capacitance from 2pF to 45pF @ 5V Low leakage current : I R = 2µA max Holding current:
More informationSMP30 TRISIL FOR TELECOM EQUIPMENT PROTECTION
SMP3 TRISIL FOR TELECOM EQUIPMENT PROTECTION FEATURES Bidirectional crowbar protection Voltage range from 62V to 27V Low capacitance from 1pF to 2pF typ.@ 5V Low leakage current: I R = 2µA max. Holding
More informationt p = 10 ms T j initial = T amb
TRANSIL FEATURES Peak pulse power: 6 W (1/ µs ) Stand-off voltage range 6.8 to 44V Unidirectional and Bidirectional types Low clamping factor Fast response time UL recognized DESCRIPTION Transil diodes
More informationTPN3021. Tripolar overvoltage protection for network interfaces. Features. Applications. Description. Benefits
TPN321 Tripolar overvoltage protection for network interfaces Features Triple crowbar protection Low capacitance Low holding current: I H = 3 ma minimum Surge current: I PP = 2 A, 2/1 µs I PP = 3 A, 1/1
More informationP6KE. Transil, transient voltage surge suppressor (TVS) Features. Description. Complies with the following standards
Transil, transient voltage surge suppressor (TVS) Datasheet production data Features Peak pulse power: 600 W (10/0 µs ) Stand-off voltage range 6.8 to 440 V Unidirectional and bidirectional types Low clamping
More informationSMP80MC. Trisil for telecom equipment protection. Features. Description. Applications. Benefits. Complies with the following standards
SMP8MC Trisil for telecom equipment protection Features Bidirectional crowbar protection Voltage: range from 12 V to 32 V Low V BO / V R ratio Micro capacitance equal to 12 pf @ 5 V Low leakage current:
More informationSurface Mount > 600W > P6SMB11AT3G Series. Description. Features
P6SMB11AT3G Series Pb OBSOLETE/EOL DATE June/30/2018 PCN/ECN# LFPCN41246 REPLACED BY P6SMB Series Description The P6SMB11AT3G series is designed to protect voltage sensitive components from high voltage,
More informationP6SMB11AT3G Series. TVS Diodes. Surface Mount > 600W > P6SMB11AT3G Series. Bi-directional. Cathode. Anode. Uni-directional.
P6SMB11AT3G Series Pb Description The P6SMB11AT3G series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge
More informationLCDP1521. Dual line programmable transient voltage suppressor for SLIC protection. Features. Description. Benefits. Functional diagram
LCDP121 Dual line programmable transient voltage suppressor for SLIC protection Features Dual line programmable transient voltage suppressor Wide negative firing voltage range: V MGL = -10 V max. Low dynamic
More information1SMA5.0AT3G Series. TVS Diodes. Surface Mount > 400W > 1SMA5.0AT3G Series. Bi-directional. Cathode. Anode. Uni-directional.
SMA5.0AT3G Series Pb Description The SMA5.0AT3G series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge
More informationSP4040 Series 3.3V 75A Rail Clamp Array
3.3V 7A Rail Clamp Array RoHS Pb GREEN Description The SP4040 provides overvoltage protection for applications such as 0/00/000 Base-T Ethernet and T3/ E3 interfaces. This device has a low capacitance
More informationWE05MF. 2 SOT-553 (Top View) Features IEC COMPATIBILITY (EN ) Tel: Transient Voltage Suppressor SOT-553
Document: W030044, Rev: A Transient Voltage Suppressor Features Solid-state silicon-avalanche technology 30 Watts Peak Pulse Power per Line (t p =8/20μs) Low operating and clamping voltages Up to Four
More informationZener Voltage Regulators
Zener Voltage Regulators 5 mw SOD 3 Surface Mount Three complete series of Zener diodes are offered in the convenient, surface mount plastic SOD 3 package. These devices provide a convenient alternative
More informationSMP100LC. Trisil for telecom equipment protection. Features. Main applications. Description. Order code. Benefits
SMP1LC Trisil for telecom equipment protection Features Bidirectional crowbar protection Voltage range from 8 V to 4 V Low capacitance from 2 pf to 45 pf @ 5 V Low leakage current : I R = 2 µa max Holding
More informationL13ESD5V0CE2 BIDIRECTIONAL ESD PROTECTION DIODE. STAND-OFF VOLTAGE Volts POWER DISSIPATION Watts SOD-882
BIDIRECTIONAL ESD PROTECTION DIODE STAND-OFF OLTAGE - 5.0 olts POWER DISSIPATION - 130 Watts GENERAL DESCRIPTION The is designed to protect sensitive electronics from damage or latch up due to ESD, lightning,
More informationSMP100LC. Trisil for telecom equipment protection. Features. Description. Applications. Benefits. Complies with the following standards
SMP1LC Trisil for telecom equipment protection Features Bidirectional crowbar protection Voltage range from 8 V to 4 V Low capacitance from 2 pf to 45 pf @ 2 V Low leakage current: I R = 2 µa max Holding
More information1.5SMCxxAT3G. TVS Diodes. Surface Mount > 1500W > 1.5SMCxxAT3G. Cathode. Anode. Uni-directional. Description
1.5SMCxxAT3G Pb Description The 1.5SMCxxAT3G series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability,
More informationP6SMB6.8AT3G Series, SZP6SMB6.8AT3G Series. 600 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional*
P66.8AT3G Series, SZP66.8AT3G Series 600 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional* The series is designed to protect voltage sensitive components from high voltage, high energy
More informationP6SMB Series. Transient Voltage Suppression Diodes. Surface Mount 600W > P6SMB series. Description
P6SMB Series RoHS Pb e3 Description Uni-directional The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationBZW06-5V8/376 BZW06-5V8B/376B
BZW06-5V8/376 BZW06-5V8B/376B TRANSIL TM FEATURES PEAK PULSE POWER : 600 W (10/1000µs) STAND-OFF VOLTAGE RANGE : From 5.8V to 376 V UNI AND BIDIRECTIONAL TYPES LOW CLAMPING FACTOR FAST RESPONSE TIME UL
More information1.5SMC6.8AT3G. TVS Diodes. Surface Mount > 1500W > 1.5SMC6.8AT3G. Bi-directional. Cathode. Anode. Uni-directional. Description
1.5SMC6.8AT3G Pb Description The 1.5SMC6.8AT3G series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge
More informationTransient Voltage Suppression Diodes. Surface Mount 400W > P4SMA series. Features. less than 1μA when V BR. Applications. Additional Infomarion
P4SMA Series RoHS Pb e3 Uni-directional Bi-directional Description The P4SMA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other
More informationSymbol Parameter Value Unit. Maximum lead temperature for soldering during 10s at 5mm from case
BZW50-10,B/180,B TRANSIL TM FEATURES PEAK PULSE POWER : 5000 W (10/1000µs) STAND-OFF VOLTAGE RANGE : From 10V to 180V UNI AND BIDIRECTIONAL TYPES LOW CLAMPING FACTOR FAST RESPONSE TIME UL RECOGNIZED DESCRIPTION
More informationDescription. Line (TIP1 or RING1) Gn1. Gn2. Line (TIP2 or RING2)
Dual line programmable transient voltage suppressor for SLIC protection Datasheet - production data SO-8 Description This device has been especially designed to protect 2 new high voltage, as well as classical
More informationP6SMB Series. TVS Diodes Surface Mount 600W > P6SMB series. Description. Uni-directional
RoHS Pb e3 Uni-directional Description Bi-directional The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationWS2.8LVU. Features IEC COMPATIBILITY (EN ) Transient Voltage Suppressor. SOT23-3L (Top View) Document: W , Rev: C
Document: W33, Rev: C Transient Voltage Suppressor Features 4 Watts peak pulse power (t p =8/μs) One device protects one unidirectional line Two devices protect two high-speed data line pairs Low capacitance
More informationPAM1LIN 200 WATT ASYMMETRICAL LINE PROTECTION TVS ARRAY DESCRIPTION SOD-323 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
200 WATT ASYMMETRICAL LINE PROTECTION TVS ARRAY DESCRIPTION The is an asymmetrical line protection transient voltage suppressor array, designed for local interconnect network (LIN) bus protection. This
More informationMSP3V3, MSP5.0A. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES. Series.
Surface Mount TRANSZORB Transient Voltage Suppressors esmp Series Top View Bottom View PRIMARY CHARACTERISTICS V WM 3.3 V to 5. V V BR 4.1 V to 7.7 V P PPM 15 W T J max. 15 C Polarity Uni-directional Package
More informationP4SMA-E Series. TVS Diodes Surface Mount 400W > P4SMA-E series Series. Description. Uni-directional
P4SMA-E Series RoHS Pb e3 Description The P4SMA-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationMSP5.0A. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. New Product
MSP5.A Surface Mount TRANSZORB Transient Voltage Suppressors esmp TM Series Top View Bottom View MicroSMP PRIMARY CHARACTERISTICS V WM 5. V P PPM W I FSM 25 A T J max. 5 C FEATURES Very low profile - typical
More informationLCP154DJF. Programmable transient voltage suppressor for SLIC protection. Description. Features. Benefits
Programmable transient voltage suppressor for SLIC protection Description Datasheet - production data Features Programmable transient suppressor Wide negative firing voltage range: V Gn = - 175 V max.
More informationSMP100LC. Trisil for telecom equipment protection. Features. Description. Applications. Benefits. Complies with the following standards
SMP1LC Trisil for telecom equipment protection Features Bidirectional crowbar protection Voltage range from 8 V to 4 V Low capacitance from 2 pf to 45 pf @ 2 V Low leakage current: I R = 2 µa max Holding
More informationP6SMB-E Series. TVS Diodes Surface Mount 600W > P6SMB-E series Series. Description. Uni-directional
P6SMB-E Series RoHS Pb e3 Description The P6SMB-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationDistributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. P6KE6V8(C)A - P6KE4(C)A 6W TRANSIENT VOLTAGE SUPPRESSOR Features 6W Peak Pulse
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features Glass passivated junction Low zener impedance Excellent clamping capability 400W peak pulse power capability at 10/1000μs waveform, repetition rate (duty
More informationt p = 10 ms T j initial = T amb
P6KE TRANSIL FEATURES Peak pulse power: 600 W (/0 µs ) Stand-off voltage range 6.8 to 440V Unidirectional and Bidirectional types Low clamping factor Fast response time UL recognized DESCRIPTION Transil
More informationSurface Mount > 600W > 1SMB10CAT3G Series. Description. Features
1SMB10CAT3G Series Pb OBSOLETE/EOL DATE June/30/2018 PCN/ECN# LFPCN41246 REPLACED BY SMBJ Series Description The 1SMB10CAT3Gv series is designed to protect voltage sensitive components from high voltage,
More informationMMBZxxxALT1G Series, SZMMBZxxxALT1G Series. 24 and 40 Watt Peak Power Zener Transient Voltage Suppressors
MMBZxxxALTG Series, SZMMBZxxxALTG Series 24 and 4 Watt Peak Power Zener Transient Voltage Suppressors Dual Common Anode Zeners for ESD Protection These dual monolithic silicon Zener diodes are designed
More informationTISP4G024L1W G.Fast VDSL Protector
*RoHS COMPLIANT U80L Features n Low capacitance n Low distortion n Surge protection n RoHS compliant* Applications n G.Fast equipment n xdsl modems and line cards TISP4G024LW G.Fast VDSL Protector General
More informationBZW06 SERIES Taiwan Semiconductor
600W, 3V - 376V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 600W surge capability at / 0 μs waveform - Fast response time: Typically less than.0ps from
More informationSM6T250CAY. Automotive 600 W Transil. Description. Features. Complies with the following standards
Automotive 600 W Transil Datasheet - production data Complies with the following standards IEC 61000-4-2 exceeds level 4: 30 kv (air discharge) 30 kv (contact discharge) ISO 10605, C = 330 pf, R = 330
More informationSurface Mount Transient Voltage Suppressors (TVS)
Description The 1.5SMC series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional
More informationSurface Mount > 400W > 1SMA5.0AT3G Series. Description. Features
SM5.0T3G Series Pb OBSOLETE/EOL DTE June/30/208 PCN/ECN# LFPCN4246 REPLCED BY SMJ Series Description The SM5.0T3G series is designed to protect voltage sensitive components from high voltage, high energy
More informationBZW06. Transil. Description. Features
Transil Datasheet - production data Description Transil diodes provide high overvoltage protection by clamping action. Their instantaneous response to transient overvoltages makes them particularly suited
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent
More informationL02U5V0MA-6C. STAND-OFF VOLTAGE 5.0 Volts POWER DISSIPATION - 20 Watts ESD PROTECTION DIODE SLP4120P10
/. L2U5VMA-6C GENERAL DESCRIPTION ESD PROTECTION DIODE The L2U5VMA-6C is ultra low capacitance TVS arrays designed to protect high Speed data interfaces. This Series has been specifically designed to protect
More informationSR70 RailClamp Low Capacitance TVS Diode Array
Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. The has been specifically designed to protect sensitive components which are connected to data and transmission
More information1SMA5.0AT3G Series, SZ1SMA5.0AT3G Series. 400 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional
5.AT3G Series, SZ5.AT3G Series 4 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional The series is designed to protect voltage sensitive components from high voltage, high energy transients.
More informationTECHNICAL SPECIFICATIONS OF SILICON RECTIFIER
TECHNICAL SPECIFICATIONS OF SILICON RECTIFIER VOLTAGE RANGE 5 to 1 CURRENT 1. Ampere FEATURES * Low cost * Low leakage * Low forward voltage drop * High current capability DO 41 MECHANICAL DATA * Case:
More informationLCDP1521S. Dual line programmable transient voltage suppressor for SLIC protection. Features. Description. Benefits
LCDP121S Dual line programmable transient voltage suppressor for SLIC protection Features Dual line programmable transient voltage suppressor with separated gates Wide negative firing voltage range: V
More informationSIDACtor Protection Thyristors Broadband Optimized TM Protection. Q2L Series - 3x3 QFN. Description
Q2L Series - 3x3 QN RoHS Pb e3 Description Q2L Series 3x3 QN are low capacitance SIDACtor thyristors designed to protect high density broadband equipment from damaging overvoltage transients. The series
More informationSZSMF5.0AT1G Series. TVS Diodes. Surface Mount > 200W > SZSMF5.0AT1G Series. Bi-directional. Cathode. Anode. Uni-directional.
Surface Mount > 2W > SZSMF5.ATG Series SZSMF5.ATG Series Pb Description The SZSMF5.ATG Series is designed to protect voltage sensitive components from high voltage, high energy transients. Excellent clamping
More informationTHBTxxx11D TRIPOLAR OVERVOLTAGE PROTECTION FOR TELECOM LINE. Application Specific Discretes A.S.D. 8 TIP 7 GND 6 GND 5 RING GND 3 RING FEATURES
Application Specific Discretes A.S.D. THBTxxx11D TRIPOLAR OEROLTAGE PROTECTION FOR TELECOM LINE FEATURES n BIDIRECTIONAL CROWBAR PROTECTION BETWEEN TIP AND, AND AND BETWEEN TIP AND. n PEAK PULSE CURRENT
More informationGLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR POWER 600 Watt DEVICES FOR BIPOLAR APPLICATIONS
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR POWER 600 Watt BREAK DOWN VOLTAGE 6.8 to 550 Volt FEATURES Recongnized File # E210467 Plastic package has Underwriters Laboratory Flammability Classification
More informationTISP7015 (VLV) Overvoltage Protector
*RoHS COMPLIANT VERSIONS AVAILABLE TISP7015 TRIPLE ELEMENT THYRISTOR OVERVOLTAGE PROTECTORS TISP7015 (VLV) Overvoltage Protector Three Terminal Very Low Voltage (VLV) Protection Ion-Implanted Breakdown
More informationP6KE-G Series. 600W Transient Voltage Suppressor. Stand-off Voltage: 6.8 ~ 600V Power Dissipation: 600 Watts RoHS Device. Features.
P6KE-G Series Stand-off Voltage: 6.8 ~ 6V Power Dissipation: 6 Watts RoHS Device Features -Plastic package has underwriters laboratory flammability classification 94V- -6W, surge capability at ms. -Excellent
More informationPAM28DOAC Series 400 WATT TVS COMPONENT APPLICATIONS DO-214AC PACKAGE MECHANICAL CHARACTERISTICS FEATURES PIN CONFIGURATIONS. Automotive Applications
4 WATT TVS COMPONENT APPLICATIONS Automotive Applications DO-214AC PACKAGE FEATURES AEC-Q11 Qualified ISO 7637-2 Pulse 1, 2a, 2b, 3a, 3b Compliant UL File Recognition #E28219 IEC 6-4-2 (ESD): Level 4 -
More informationESD5311X ESD5311X 1-Line, Bi-directional, Ultra-low Capacitance http//: Transient Voltage Suppressors Descriptions
1-Line, Bi-directional, Ultra-low Capacitance Transient Voltage Suppressors http//:www.willsemi.com Descriptions The is an ultra-low capacitance TVS (Transient Voltage Suppressor) designed to protect high
More informationG H I All Dimensions in millimeter Portable electronics Cellular handsets and accessories.
LITE-ON SEMICONDUCTOR BIDIRECTIONAL ESD PROTECTION DIODES STAND-OFF VOLTAGE - 12. Volts POWER DISSIPATION - 35 WATTS GENERAL DESCRIPTION Electro Static Discharge ( ESD ) protection diodes in ultra small
More informationElectrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description The is an ultra low capacitance TVS array designed to potect the gigabit network hundred meters transport port.this series has been
More informationProgrammable transient voltage suppressor for SLIC protection. Line TIP or RING 1. Gate (Gn) Line RING or TIP
Programmable transient voltage suppressor for SLIC protection Datasheet - production data Features Programmable transient suppressor Wide negative firing voltage range: VGn = -175 V max. Low dynamic switching
More informationMMBZxxVAWT1G Series, SZMMBZxxVAWT1G Series. 40 Watt Peak Power Zener Transient Voltage Suppressors. SC 70 Dual Common Anode Zeners for ESD Protection
MMBZxxVAWTG Series, SZMMBZxxVAWTG Series 4 Watt Peak Power Zener Transient Voltage Suppressors SC 7 Dual Common Anode Zeners for ESD Protection These dual monolithic silicon Zener diodes are designed for
More informationGeneral Purpose Plastic Rectifier
General Purpose Plastic Rectifier N400 thru N4007 DO-4AL (DO-4) MAJOR RATINGS AND CHARACTERISTICS I F(AV).0 A V RRM V to 00 V I FSM (8.3 ms sine-wave) A I FSM (square wave t p = ms) 45 A V F. V I R 5.0
More informationDATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY 1.0SMB series
Product specification November 5, 28 V. DATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY.SMB series RoHS compliant & Halogen free Transient Suppressors.SMB 2 Transient Suppressors (TVS) Data
More informationACZRA4728-HF Thru. ACZRA4764-HF
CZR4728-HF Thru. CZR4764-HF Voltage: 3.3 to Volts Power:. Watts RoHS Device Halogen Free Features -Batch process design, excellent power dissipation offers better reverse leakage current and thermal resistance.
More informationSurface Mount > 400W > 1SMA10CAT3G Series. Description. Features. Board Mounting. Low Profile Package. Functional Diagram. Additional Information
C TVS Diodes 1SMA10CAT3G Series Pb Description The 1SMA10CAT3G series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability,
More informationEAYW ESD5425E ESD5425E. Descriptions. Features. Order information. Applications. http//:
4-Lines, Uni-directional, Low Capacitance Transient Voltage Suppressors http//:www.sh-willsemi.com Descriptions The is a low capacitance TVS (Transient Voltage Suppressor) array designed to protect high
More information30KP SERIES. Features. Mechanical Data. Maximum Ratings and Electrical A =25 C unless otherwise specified
3KP SERIES 3W TRANSIENT VOLTAGE SUPPRESSOR Pb Features Glass Passivated Die Construction 3W Peak Pulse Power Dissipation 8V 88V Standoff Voltage A B A Uni- and Versions Available Excellent Clamping Voltage
More informationDATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER LBD8CXXL01 series
Product specification ecember 18, 18 V. ATA SHEET ELECTROSTATIC ISCHARGE PROTECTION EVICES INUSTRIAL / CONSUMER series RoHS compliant & Halogen free 2 Electrostatic ischarged Protection evices (ES) ata
More information15,000 Watt Transient Voltage Suppressor (TVS) Protection Device
Compliant 15,000 Watt Transient Voltage Suppressor (TVS) Protection Device DESCRIPTION This device clamps dangerous high-voltage short-term transients such as those produced by the secondary effects of
More informationP6KE SERIES Taiwan Semiconductor
600W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 600W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps
More informationPAM31DOAB Series 1500 WATT TVS COMPONENT APPLICATIONS DO-214AB PACKAGE MECHANICAL CHARACTERISTICS FEATURES PIN CONFIGURATIONS.
15 WATT TVS COMPONENT APPLICATIONS Automotive DO-214AB PACKAGE FEATURES AEC-Q11 Qualified UL File Recognition #E28219 Compatible with IEC 6-4-2 (ESD): Level 4 - Air 15kV, Contact 8kV Compatible with IEC
More informationSDS4148G SWITCHING DIODE
SWITCHING DIODE Small Signal Fast Switching Diode General Description General-purpose switching diodes, fabricated in planar technology, and packaged in small SOD-123 surface mounted device (SMD) packages.
More informationDATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER UBT23AXXL02 series
Product specification December 19, 218 V. DATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER UBT2AXXL2 series RoHS compliant & Halogen free 2 Electrostatic Discharged Protection
More informationESD5651N ESD5651N. Descriptions. Features. Applications. Order information. Pin1. Pin2. 4.5V, Single Li-ion Battery Port Surge Protector
4.5V, Single Li-ion Battery Port Surge Protector http//:www.sh-willsemi.com Descriptions The is a bi-directional TVS (Transient Voltage Suppressor). It is specifically designed to protect sensitive electronic
More information6600W, 10V 43V Surface Mount Transient Voltage Suppressor
66W, 1V 43V Surface Mount Transient Voltage Suppressor FEATURES AEC-Q11 qualified Junction passivation optimized design technology T J =175 C capability suitable for high reliability and automotive requirement
More information500mW High Speed SMD Switching Diode
5mW High Speed SMD Switching Diode FEATURES - Designed for mounting on small surface - Extremely thin/leadless package - High mounting capability, strong surage with stand, high reliability - Pb free and
More informationRClamp3304NA RailClamp 3.3V TVS Arrays
- RailClamp Description RailClamp low capacitance TVS array is designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected
More informationP4KE SERIES Taiwan Semiconductor
400W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 400W surge capability at 10 / 1000 μs waveform - Fast response time: Typically less than
More informationuclamp3311pq Low Voltage µclamp for Automotive Applications PROTECTION PRODUCTS - MicroClamp Description Features Mechanical Characteristics
- MicroClamp Description The µclamp 33PQ transient voltage suppressor is specifically designed to protect sensitive components which are connected to low-voltage data and transmission lines from overvoltage
More information1SMA10CAT3G Series, SZ1SMA10CAT3G Series
1SMA10CAT3G Series, SZ1SMA10CAT3G Series Pb Description The SMA series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability,
More informationSMM4FxxA. 400 W Transil TM. Description. Features. Complies with the following standards
400 W Transil TM Datasheet - production data Features K Typical peak pulse power: 400 W (10/1000 μs) 2.4 kw (8/20 μs) Stand-off voltage range: from 5 V to 33 V Unidirectional type Low leakage current:
More information1N5908 SM5908. Transil. Features. Description. Complies with the following standards. Peak pulse power: Stand off voltage: 5 V Unidirectional
1N5908 SM5908 Transil Features Peak pulse power: 1500 W (10/1000 μs) Stand off voltage: 5 V Unidirectional A A Operating T jmax : 175 C High power capability at T jmax : 1500 W (10/1000 µs) JEDEC registered
More informationHigh Power Density Surface Mount TRANSZORB Transient Voltage Suppressors
High Power Density Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR 6.4 V to 49.1 V V WM 5.0 V to 40 V P PPM 0 W I FSM (uni-directional only) 40 A T J max. 1 C Polarity
More information1N6267A Series. TVS Diodes Watt Zener Transient Voltage Suppressors. Cathode. Anode. Description
1N6267A Series Pb Description These devices are designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability,
More informationGreen. Part Number Qualification Case Packaging P4SMAJXXADF-13 Commercial D-FLAT 10,000/Tape & Reel
Green 400W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Features Mechanical Data Packaged in the Low Profile D-FLAT to Optimize Board Space Case: D-FLAT Glass Passivated Die Construction Excellent Clamping
More informationSTIEC45-xxAS, STIEC45-xxACS
Transil TVS for IEC 61000-4-5 compliance Datasheet - production data MIL STD 883G, method 3015-7 Class 3B 25 kv HBM (human body model) Resin meets UL 94, V0 MIL-STD-750, method 2026 solderability EIA-481
More informationMMBZ5V6ALT1 Series. 24 and 40 Watt Peak Power Zener Transient Voltage Suppressors. SOT 23 Dual Common Anode Zeners for ESD Protection
4 and 4 Watt Peak Power Zener Transient Voltage Suppressors Dual Common Anode Zeners for ESD Protection These dual monolithic silicon Zener diodes are designed for applications requiring transient overvoltage
More informationTClamp0602N. Low Capacitance TVS for Ethernet and Telecom Interfaces. PROTECTION PRODUCTS - TransClamp ΤΜ Description. Features
ΤΜ - TransClamp ΤΜ Description A TransClamp ΤΜ is a low capacitance TVS array designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components
More informationBZW04 SERIES Taiwan Semiconductor
W, 5.8V - 376V Transient Voltage Suppressor BZW4 SERIES FEATURES - Excellent clamping capability - Low impedance surge resistance - W surge capability at / μs waveform - Very fast response time - Typical
More information1N6267A Series Watt Zener Transient Voltage Suppressors. Unidirectional*
500 Watt Zener Transient Voltage Suppressors Unidirectional* These devices are designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability,
More informationDATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER SDD32A05L01 series
Product specification November 7, 218 V. ATA SHEET ELECTROSTATIC ISCHARGE PROTECTION EVICES INUSTRIAL / CONSUMER series RoHS compliant & Halogen free 2 escription Electrostatic ischarged Protection evices
More informationLCDA15-1. Low Capacitance TVS Diode Array PRELIMINARY Features. PROTECTION PRODUCTS Description. Mechanical Characteristics.
Description The is a low capacitance transient voltage suppressor (TVS) diode array. It is designed to protect sensitive CMOS ICs from the damaging effects of ESD and lightning. Each device will protect
More informationFAIRCHILD TVS Is Now Part of
FAIRCHILD TVS Is Now Part of To learn more about Taiwan Semiconductor, please visit our website at www.taiwansemi.com Please note: The acquisition of this portfolio aligns with our strategy to expand in
More informationCZRA4728-G Thru CZRA4764-G
CZR4728-G Thru CZR4764-G Voltage: 3.3 to Volts Power:. Watts RoHS Device Features -Batch process design, excellent power dissipation offers better reverse leakage current and thermal resistance. -Standard
More information5V 48V Small Footprint, Surface Mount Transient Voltage Suppressors
Available 5V 48V Small Footprint, Surface Mount Transient Voltage Suppressors DESCRIPTION Microsemi s unique and new Powermite UPT series of transient voltage suppressors feature oxidepassivated chips
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors esmp Series PRIMARY CHARACTERISTICS V BR uni-directional 4. V to 44.2 V V WM 3.3 V to 36 V P PPM 400 W I FSM 40 A T J max. 150 C Polarity Uni-directional
More informationHigh Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions DESIGN SUPPORT TOOLS Models Available Top View Cathode esmp Series Bottom View PRIMARY CHARACTERISTICS
More information5KP-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 5000W > 5KP-HRA series. Description. Uni-directional
5KP-HRA Series RoHS Pb e3 AGENCY Uni-directional Agency Approvals AGENCY FILE NUMBER E28662/E2353 Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) P PPM 5 W
More information30KPA-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 30000W > 30KPA-HRA series. Descriptios. Uni-directional
3KPA-HRA Series RoHS Pb e3 AGENCY Uni-directional Agency Approvals Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) P PPM 3 W Steady State Power Dissipation
More information