Syllabus Recording Devices

Size: px
Start display at page:

Download "Syllabus Recording Devices"

Transcription

1

2 Syllabus Recording Devices Introduction, Strip chart recorders, Galvanometer recorders, Null balance recorders, Potentiometer type recorders, Bridge type recorders, LVDT type recorders, Circular chart and X Y recorders. Magnetic tape recorders, Direct recording, Frequency modulation recording, Pulse duration modulation recording, Digital tape recording, Ultraviolet recorders. Biomedical recorders, Electro Cardio Graph (ECG), Electroencephalograph, Electromyograph. Noise in reproduction.

3 RECORDERS Recorder records an electrical or nonelectrical quantities as a function of time. Classified into Analog recorders A) Graphic recorders( Strip Chart Recorders,X-Y recorders) B) Oscilloscopic Recorders C) Magnetic tape recorders Digital recorders A) Incremental B)Synchronous

4 Galvanometer Type Use D Arsonval galvanometer As the current flows through the coil, it deflects. The deflection is produced by a galvanometer which produces a torque on the account of current passing through the large moving coil situated in a strong magnetic field. Greater the amplitude of the incoming signal (proportional to the quantity being measured), the grater is the deflection. Instrument should be critically damped to avoid overshoot. Does not suitable for fast variations in current,voltage or power. Only records the average value.

5 GALVANOMETER RECORDER

6 CIRCULAR CHART RECORDER CIRCULAR CHART RECORDER 1 CIRCULAR CHART RECORDER 2

7

8 Null Type Change in input produced by the signal upset the balance of the measuring circuit of the recorder. As a result of this unbalance, an error signal is produced that operates on some devices which restore the balance or bring the system to null conditions. Eg: Potentiometric Recorders, Bridge Recorders, LVDT Eg: Potentiometric Recorders, Bridge Recorders, LVDT Recorders.

9

10 SELF BALANCING POTENTIOMETRIC RECORDER

11 BRIDGE TYPE RECORDER

12 Strip chart Recorder Advantages: Conversion of data is easier when rectangular coordinated are used. The rate of movement of the chart can easily be changed to spread out the trace of the variable being observed Disadvantages: Observing the behavior several hours or days back is not as easy. 16 November

13 Strip Chart Recorders

14 X-Y Recorder Records one or more parameters with respect to some other Or x-y recorder is an instrument which gives a graphic record of the relationship between two variables. In some type recorders,pen moves in two axes In X-Y recorders, an emf is plotted as a function of another emf. 16 November

15 X-Y Recorder 16 November

16 X-Y RECORDER X-Y RECORDER

17 X-Y Recorder A signal enters each of the two channels. The signals are attenuated to the inherent full scale range of the recorder, the signal then passes to a balance circuit where it is compared with an internal reference voltage. The error signal,the difference between the input signal voltage and the reference voltage is fed to a chopper which converts d.c signal to an a.c signal. 16 November

18 X-Y Recorder The signal is then amplified in order to actuate a servomotor which is used to balance the system and hold it in balance as the value of the quantity being recorder changes. 16 November

19 Application X-Y Recorder Speed torque characteristics of motors lift Drag wind tunnel tests Plotting of characteristics of vacuum tubes, zener diodes rectifiers and transistors etc Regulation curves of power supplies Plotting stress-strain curves, hysteresis curves and vibrations amplitude against swept frequency Electrical characteristics of materials such as resistance versus and temperature plotting the output from Electronic calculators and computers 16 November

20 MAGNETIC TAPE RECORDER Magnetic tape recording HEAD Magnetic tape recording Data Storage

21

22 TAPE TRANSPORT MECHANISM

23 Digital Recording An analog signal is converted to digital by an analog-to-digital converter, which measures the amplitude of an analog signal at regular intervals, which are specified by the sample rate, and then stores these sampled & quantized numerical value in computer hardware such as compact disc or hard` disk. Digital recordings are very accurate, the accuracy determined only by the quality of the D/A and A/D converters. For optical disc recording technologies such as CDs or DVDs, a laser is used to burn microscopic holes into the dye layer of the medium. A weaker laser is used to read these signals. This works because the metallic substrate of the disc is reflective, and the unburned dye prevents reflection while the holes in the dye permit it, allowing digital data to be represented.

24 Digital Recording During digital recording of the analog signal, analog to digital (A/D) conversion takes place from continuous time-amplitude coordinates to discrete time-amplitude coordinates

25 Digital Recording

26 PWM

27 LVDT

28 LVDT LVDT

29 ECG

30

31

32 EEG Electroencephalography (EEG) is an electrophysiological monitoring method to record electrical activity of the brain. It is typically noninvasive, with the electrodes placed along the scalp.

33

34 EMG Electromyography (EMG) is a diagnostic procedure to assess the health of muscles and the nerve cells that control them (motor neurons). Motor neurons transmit electrical signals that cause muscles to contract. An EMG translates these signals into graphs

35 EMG An EMG uses tiny devices called electrodes to transmit or detect electrical signals. During a needle EMG, a needle electrode inserted directly into a muscle records the electrical activity in that muscle. A nerve conduction study, another part of an EMG, uses electrodes taped to the skin (surface electrodes) to measure the speed and strength of signals traveling between two or more points. EMG results can reveal nerve dysfunction, muscle dysfunction or problems with nerve-to-muscle signal transmission.

36 Thanks Prof.Sharanabasappa, EEE Dept, RYMEC A Course in Electronic Measurements and Instrumentation by A.K. Sawhney Electrical and Electronics Measurements and Instrumentation by Prithwiraj Purkait et al Electrical measurements book by P.M.Chandrasekharaiah Electrical Measurement & Measuring Instruments by A.V.Bakshi et al slideshare.net And other Internet resources

37

A. K. Sawhney - A course in Electrical and electronics measurement and Instrumentation, Dhanpatrai & Sons

A. K. Sawhney - A course in Electrical and electronics measurement and Instrumentation, Dhanpatrai & Sons Ruchi Gajjar A. K. Sawhney - A course in Electrical and electronics measurement and Instrumentation, Dhanpatrai & Sons It is necessary to have a permanent record or state of a phenomenon being investigated

More information

InstrumentationTools.com

InstrumentationTools.com Author: Instrumentation Tools Categories: Multiple Choice Questions Measurement and Instrumentation Objective Questions Part 4 Measurement and Instrumentation Objective Questions 1. The decibel is a measure

More information

COURSE PLAN

COURSE PLAN COURSE PLAN 26-27 Staff Name: DR S.M.SHASHIDHAR Sem:III q Sec:A Course Name: ELECTRICAL AND ELECTRONIC MEASUREMENTS Lesson plan author name: DR S.M.SHASHIDHAR Course Code:15EE36 Checked by: Total Contact

More information

Advanced Measurements

Advanced Measurements Albaha University Faculty of Engineering Mechanical Engineering Department Lecture 5: Displacement measurement Ossama Abouelatta o_abouelatta@yahoo.com Mechanical Engineering Department Faculty of Engineering

More information

Ch 5 Hardware Components for Automation

Ch 5 Hardware Components for Automation Ch 5 Hardware Components for Automation Sections: 1. Sensors 2. Actuators 3. Analog-to-Digital Conversion 4. Digital-to-Analog Conversion 5. Input/Output Devices for Discrete Data Computer-Process Interface

More information

Synchronous Machines Study Material

Synchronous Machines Study Material Synchronous machines: The machines generating alternating emf from the mechanical input are called alternators or synchronous generators. They are also known as AC generators. All modern power stations

More information

ELG3336 Design of Mechatronics System

ELG3336 Design of Mechatronics System ELG3336 Design of Mechatronics System Elements of a Data Acquisition System 2 Analog Signal Data Acquisition Hardware Your Signal Data Acquisition DAQ Device System Computer Cable Terminal Block Data Acquisition

More information

Design of LVDT Based Digital Weighing System

Design of LVDT Based Digital Weighing System International Journal of Electronics and Computer Science Engineering 2100 Available Online at www.ijecse.org ISSN- 2277-1956 Pratiksha Sarma 1, P. K. Bordoloi 2 1,2 Department of Applied Electronics and

More information

Biomechanical Instrumentation Considerations in Data Acquisition ÉCOLE DES SCIENCES DE L ACTIVITÉ PHYSIQUE SCHOOL OF HUMAN KINETICS

Biomechanical Instrumentation Considerations in Data Acquisition ÉCOLE DES SCIENCES DE L ACTIVITÉ PHYSIQUE SCHOOL OF HUMAN KINETICS Biomechanical Instrumentation Considerations in Data Acquisition Data Acquisition in Biomechanics Why??? Describe and Understand a Phenomena Test a Theory Evaluate a condition/situation Data Acquisition

More information

MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION (Autonomous) (ISO/IEC Certified) SUMMER 14 EXAMINATION Model Answer

MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION (Autonomous) (ISO/IEC Certified) SUMMER 14 EXAMINATION Model Answer MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION (Autonomous) (ISO/IEC 27001 2005 Certified) SUMMER 14 EXAMINATION Model Answer Subject Code : 17317 Page No: 1 Important Instructions to examiners: 1) The

More information

Question Paper Code : B.E./B.Tech. DEGREE EXAMINATION, NOVEMBER/DECEMBER Third Semester. Electrical and Electronics Engineering

Question Paper Code : B.E./B.Tech. DEGREE EXAMINATION, NOVEMBER/DECEMBER Third Semester. Electrical and Electronics Engineering Question Paper Code : 31391 B.E./B.Tech. DEGREE EXAMINATION, NOVEMBER/DECEMBER 2013. Third Semester Electrical and Electronics Engineering EE 2201/EE 33/EI 1202/10133 EE 302/080280016 MEASUREMENTS AND

More information

Introduction. ELCT903, Sensor Technology Electronics and Electrical Engineering Department 1. Dr.-Eng. Hisham El-Sherif

Introduction. ELCT903, Sensor Technology Electronics and Electrical Engineering Department 1. Dr.-Eng. Hisham El-Sherif Introduction In automation industry every mechatronic system has some sensors to measure the status of the process variables. The analogy between the human controlled system and a computer controlled system

More information

XII PHYSICS INSTRUMENTS] CHAPTER NO. 15 [ELECTRICAL MEASURING MUHAMMAD AFFAN KHAN LECTURER PHYSICS, AKHSS, K

XII PHYSICS INSTRUMENTS] CHAPTER NO. 15 [ELECTRICAL MEASURING MUHAMMAD AFFAN KHAN LECTURER PHYSICS, AKHSS, K XII PHYSICS MUHAMMAD AFFAN KHAN LECTURER PHYSICS, AKHSS, K affan_414@live.com https://promotephysics.wordpress.com [ELECTRICAL MEASURING INSTRUMENTS] CHAPTER NO. 15 MOVING COIL GALVANOMETER An electrical

More information

5. Transducers Definition and General Concept of Transducer Classification of Transducers

5. Transducers Definition and General Concept of Transducer Classification of Transducers 5.1. Definition and General Concept of Definition The transducer is a device which converts one form of energy into another form. Examples: Mechanical transducer and Electrical transducer Electrical A

More information

MEASUREMENT AND INSTRUMENTATION QUESTION BANK UNIT I INTRODUCTION. Part A

MEASUREMENT AND INSTRUMENTATION QUESTION BANK UNIT I INTRODUCTION. Part A MEASUREMENT AND INSTRUMENTATION QUESTION BANK UNIT I INTRODUCTION Part A 1. Define Standard deviation. 2. Why calibration of instrument is important? 3. What are the different calibration methodologies?

More information

Analytical Chemistry II

Analytical Chemistry II Analytical Chemistry II L3: Signal processing (selected slides) Semiconductor devices Apart from resistors and capacitors, electronic circuits often contain nonlinear devices: transistors and diodes. The

More information

ACTUATORS AND SENSORS. Joint actuating system. Servomotors. Sensors

ACTUATORS AND SENSORS. Joint actuating system. Servomotors. Sensors ACTUATORS AND SENSORS Joint actuating system Servomotors Sensors JOINT ACTUATING SYSTEM Transmissions Joint motion low speeds high torques Spur gears change axis of rotation and/or translate application

More information

MECE 3320 Measurements & Instrumentation. Data Acquisition

MECE 3320 Measurements & Instrumentation. Data Acquisition MECE 3320 Measurements & Instrumentation Data Acquisition Dr. Isaac Choutapalli Department of Mechanical Engineering University of Texas Pan American Sampling Concepts 1 f s t Sampling Rate f s 2 f m or

More information

Sine waves by far the most important form of alternating quantity important properties are shown below

Sine waves by far the most important form of alternating quantity important properties are shown below AC DC METERS 1 Sine waves by far the most important form of alternating quantity important properties are shown below 2 Average value of a sine wave average value over one (or more) cycles is clearly zero

More information

Chapter 19 Study Questions Name: Class:

Chapter 19 Study Questions Name: Class: Chapter 19 Study Questions Name: Class: Multiple Choice Identify the letter of the choice that best completes the statement or answers the question. 1. All electronic devices transmit information using

More information

IT.MLD900 SENSORS AND TRANSDUCERS TRAINER. Signal Conditioning

IT.MLD900 SENSORS AND TRANSDUCERS TRAINER. Signal Conditioning SENSORS AND TRANSDUCERS TRAINER IT.MLD900 The s and Instrumentation Trainer introduces students to input sensors, output actuators, signal conditioning circuits, and display devices through a wide range

More information

INDEX IEC:

INDEX IEC: 60050-300 IEC:2001 173 INDEX A absolute absolute error... 311-01-05 (absolute) frequency deviation... 314-08-07 accessory accessory (of a measuring instrument)... 312-03-01 accessory of limited interchangeability...

More information

Biomedical Engineering Electrophysiology

Biomedical Engineering Electrophysiology Biomedical Engineering Electrophysiology Dr. rer. nat. Andreas Neubauer Sources of biological potentials and how to record them 1. How are signals transmitted along nerves? Transmit velocity Direction

More information

End-of-Chapter Exercises

End-of-Chapter Exercises End-of-Chapter Exercises Exercises 1 12 are primarily conceptual questions designed to see whether you understand the main concepts of the chapter. 1. The four areas in Figure 20.34 are in a magnetic field.

More information

BME 3113, Dept. of BME Lecture on Introduction to Biosignal Processing

BME 3113, Dept. of BME Lecture on Introduction to Biosignal Processing What is a signal? A signal is a varying quantity whose value can be measured and which conveys information. A signal can be simply defined as a function that conveys information. Signals are represented

More information

UNIVERSITY OF JORDAN Mechatronics Engineering Department Measurements & Control Lab Experiment no.1 DC Servo Motor

UNIVERSITY OF JORDAN Mechatronics Engineering Department Measurements & Control Lab Experiment no.1 DC Servo Motor UNIVERSITY OF JORDAN Mechatronics Engineering Department Measurements & Control Lab. 0908448 Experiment no.1 DC Servo Motor OBJECTIVES: The aim of this experiment is to provide students with a sound introduction

More information

Bhoj Reddy Engineering College for Women, Hyderabad Department of Electronics and Communication Engineering Electrical and Electronics Instrumentation

Bhoj Reddy Engineering College for Women, Hyderabad Department of Electronics and Communication Engineering Electrical and Electronics Instrumentation Bhoj Reddy Engineering College for Women, Hyderabad Department of Electronics and Communication Engineering Electrical and Electronics Instrumentation Academic Year: 2016-17 III B Tech II Semester Branch:

More information

Sensors (Transducer) Introduction By Sintayehu Challa

Sensors (Transducer) Introduction By Sintayehu Challa Sensors (Transducer) Introduction What are Sensors? Basically the quantities to be measured are Non-Electrical quantities such as temperature, pressure,displacement,humidity, fluid flow, speed etc, but

More information

DC motor control using arduino

DC motor control using arduino DC motor control using arduino 1) Introduction: First we need to differentiate between DC motor and DC generator and where we can use it in this experiment. What is the main different between the DC-motor,

More information

Electronic Systems - B1 23/04/ /04/ SisElnB DDC. Chapter 2

Electronic Systems - B1 23/04/ /04/ SisElnB DDC. Chapter 2 Politecnico di Torino - ICT school Goup B - goals ELECTRONIC SYSTEMS B INFORMATION PROCESSING B.1 Systems, sensors, and actuators» System block diagram» Analog and digital signals» Examples of sensors»

More information

ELECTRONIC SYSTEMS. Introduction. B1 - Sensors and actuators. Introduction

ELECTRONIC SYSTEMS. Introduction. B1 - Sensors and actuators. Introduction Politecnico di Torino - ICT school Goup B - goals ELECTRONIC SYSTEMS B INFORMATION PROCESSING B.1 Systems, sensors, and actuators» System block diagram» Analog and digital signals» Examples of sensors»

More information

Physics 262. Lab #1: Lock-In Amplifier. John Yamrick

Physics 262. Lab #1: Lock-In Amplifier. John Yamrick Physics 262 Lab #1: Lock-In Amplifier John Yamrick Abstract This lab studied the workings of a photodiode and lock-in amplifier. The linearity and frequency response of the photodiode were examined. Introduction

More information

UNIVERSITY OF CALIFORNIA College of Engineering Department of Electrical Engineering and Computer Sciences

UNIVERSITY OF CALIFORNIA College of Engineering Department of Electrical Engineering and Computer Sciences UNIVERSITY OF CALIFORNIA College of Engineering Department of Electrical Engineering and Computer Sciences EECS 145L: Electronic Transducer Laboratory FINAL EXAMINATION Fall 2013 You have three hours to

More information

Biomedical Electrodes, Sensors, and Transducers. Definition of Biomedical Electrodes, Sensors, and Transducers. Electrode: Sensor: Transducer:

Biomedical Electrodes, Sensors, and Transducers. Definition of Biomedical Electrodes, Sensors, and Transducers. Electrode: Sensor: Transducer: Biomedical Electrodes, Sensors, and Transducers from: Chaterjee, Biomedical Instrumentation, chapter 6 Key Points Electrodes, Sensors, and Transducers: - types of electrodes - voltaic - electrolytic -

More information

4. Digital Measurement of Electrical Quantities

4. Digital Measurement of Electrical Quantities 4.1. Concept of Digital Systems Concept A digital system is a combination of devices designed for manipulating physical quantities or information represented in digital from, i.e. they can take only discrete

More information

Contents. Acknowledgments. About the Author

Contents. Acknowledgments. About the Author Contents Figures Tables Preface xi vii xiii Acknowledgments About the Author xv xvii Chapter 1. Basic Mathematics 1 Addition 1 Subtraction 2 Multiplication 2 Division 3 Exponents 3 Equations 5 Subscripts

More information

TAMIL NADU PUBLIC SERVICE COMMISSION. Post of Principal / Assistant Director (Training) Included in the Tamil Nadu Employment and Training Service

TAMIL NADU PUBLIC SERVICE COMMISSION. Post of Principal / Assistant Director (Training) Included in the Tamil Nadu Employment and Training Service Code No.207 TAMIL NADU PUBLIC SERVICE COMMISSION Post of Principal / Assistant Director (Training) Included in the Tamil Nadu Employment and Training Service Electronics and Instrumentation Engineering

More information

Electromagnetic Induction - A

Electromagnetic Induction - A Electromagnetic Induction - A APPARATUS 1. Two 225-turn coils 2. Table Galvanometer 3. Rheostat 4. Iron and aluminum rods 5. Large circular loop mounted on board 6. AC ammeter 7. Variac 8. Search coil

More information

BRAIN COMPUTER INTERFACE (BCI) RESEARCH CENTER AT SRM UNIVERSITY

BRAIN COMPUTER INTERFACE (BCI) RESEARCH CENTER AT SRM UNIVERSITY BRAIN COMPUTER INTERFACE (BCI) RESEARCH CENTER AT SRM UNIVERSITY INTRODUCTION TO BCI Brain Computer Interfacing has been one of the growing fields of research and development in recent years. An Electroencephalograph

More information

Page ENSC387 - Introduction to Electro-Mechanical Sensors and Actuators: Simon Fraser University Engineering Science

Page ENSC387 - Introduction to Electro-Mechanical Sensors and Actuators: Simon Fraser University Engineering Science Motor Driver and Feedback Control: The feedback control system of a dc motor typically consists of a microcontroller, which provides drive commands (rotation and direction) to the driver. The driver is

More information

Table of Contents Lesson One Lesson Two Lesson Three Lesson Four Lesson Five PREVIEW COPY

Table of Contents Lesson One Lesson Two Lesson Three Lesson Four Lesson Five PREVIEW COPY Oscillators Table of Contents Lesson One Lesson Two Lesson Three Introduction to Oscillators...3 Flip-Flops...19 Logic Clocks...37 Lesson Four Filters and Waveforms...53 Lesson Five Troubleshooting Oscillators...69

More information

Mechatronics System Design - Sensors

Mechatronics System Design - Sensors Mechatronics System Design - Sensors Aim of this class 1. The functional role of the sensor? 2. Displacement, velocity and visual sensors? 3. An integrated example-smart car with visual and displacement

More information

* 1 [ Contd... BOARD DIPLOMA EXAMINATION, (C 14) OCT/NOV 2015 DEEE THIRD SEMESTER EXAMINATION ENGINEERING MATHEMATICS II

* 1 [ Contd... BOARD DIPLOMA EXAMINATION, (C 14) OCT/NOV 2015 DEEE THIRD SEMESTER EXAMINATION ENGINEERING MATHEMATICS II C14 EE 301/C14 CHPP 301/C14 PET 301 BOARD DIPLOMA EXAMINATION, (C 14) OCT/NOV 2015 DEEE THIRD SEMESTER EXAMINATION ENGINEERING MATHEMATICS II Time : 3 hours ] [ Total Marks : 80 Instructions : (1) Answer

More information

Introduction to Measurement Systems

Introduction to Measurement Systems MFE 3004 Mechatronics I Measurement Systems Dr Conrad Pace Page 4.1 Introduction to Measurement Systems Role of Measurement Systems Detection receive an external stimulus (ex. Displacement) Selection measurement

More information

Electronic Instrumentation and Measurements

Electronic Instrumentation and Measurements Electronic Instrumentation and Measurements A fundamental part of many electromechanical systems is a measurement system that composed of four basic parts: Sensors Signal Conditioning Analog-to-Digital-Conversion

More information

Used to overcome ventricular fibrillation may be due to coronary occlusion, shock, or abnormalities in blood chemistry

Used to overcome ventricular fibrillation may be due to coronary occlusion, shock, or abnormalities in blood chemistry Used to overcome ventricular fibrillation may be due to coronary occlusion, shock, or abnormalities in blood chemistry Main problem: heart muscle fibers are continuously stimulated by adjacent muscles

More information

Figure 1.1 Mechatronic system components (p. 3)

Figure 1.1 Mechatronic system components (p. 3) Figure 1.1 Mechatronic system components (p. 3) Example 1.2 Measurement System Digital Thermometer (p. 5) Figure 2.2 Electric circuit terminology (p. 13) Table 2.2 Resistor color band codes (p. 18) Figure

More information

Step vs. Servo Selecting the Best

Step vs. Servo Selecting the Best Step vs. Servo Selecting the Best Dan Jones Over the many years, there have been many technical papers and articles about which motor is the best. The short and sweet answer is let s talk about the application.

More information

MEMS Optical Scanner "ECO SCAN" Application Notes. Ver.0

MEMS Optical Scanner ECO SCAN Application Notes. Ver.0 MEMS Optical Scanner "ECO SCAN" Application Notes Ver.0 Micro Electro Mechanical Systems Promotion Dept., Visionary Business Center The Nippon Signal Co., Ltd. 1 Preface This document summarizes precautions

More information

Ques on (2): [18 Marks] a) Draw the atrial synchronous Pacemaker block diagram and explain its operation. Benha University June 2013

Ques on (2): [18 Marks] a) Draw the atrial synchronous Pacemaker block diagram and explain its operation. Benha University June 2013 Benha University June 2013 Benha Faculty of Engineering Electrical Department Hospital Instrumentations (E472) 4 Th year (control) Dr.Waleed Abdel Aziz Salem Time: 3 Hrs Answer the following questions.

More information

Part 2: Second order systems: cantilever response

Part 2: Second order systems: cantilever response - cantilever response slide 1 Part 2: Second order systems: cantilever response Goals: Understand the behavior and how to characterize second order measurement systems Learn how to operate: function generator,

More information

ELECTRONIC CONTROL OF A.C. MOTORS

ELECTRONIC CONTROL OF A.C. MOTORS CONTENTS C H A P T E R46 Learning Objectives es Classes of Electronic AC Drives Variable Frequency Speed Control of a SCIM Variable Voltage Speed Control of a SCIM Chopper Speed Control of a WRIM Electronic

More information

L E C T U R E R, E L E C T R I C A L A N D M I C R O E L E C T R O N I C E N G I N E E R I N G

L E C T U R E R, E L E C T R I C A L A N D M I C R O E L E C T R O N I C E N G I N E E R I N G P R O F. S L A C K L E C T U R E R, E L E C T R I C A L A N D M I C R O E L E C T R O N I C E N G I N E E R I N G G B S E E E @ R I T. E D U B L D I N G 9, O F F I C E 0 9-3 1 8 9 ( 5 8 5 ) 4 7 5-5 1 0

More information

Introduction to Arduino HW Labs

Introduction to Arduino HW Labs Introduction to Arduino HW Labs In the next six lab sessions, you ll attach sensors and actuators to your Arduino processor This session provides an overview for the devices LED indicators Text/Sound Output

More information

Precalculations Individual Portion Introductory Lab: Basic Operation of Common Laboratory Instruments

Precalculations Individual Portion Introductory Lab: Basic Operation of Common Laboratory Instruments Name: Date of lab: Section number: M E 345. Lab 1 Precalculations Individual Portion Introductory Lab: Basic Operation of Common Laboratory Instruments Precalculations Score (for instructor or TA use only):

More information

9/28/2010. Chapter , The McGraw-Hill Companies, Inc.

9/28/2010. Chapter , The McGraw-Hill Companies, Inc. Chapter 4 Sensors are are used to detect, and often to measure, the magnitude of something. They basically operate by converting mechanical, magnetic, thermal, optical, and chemical variations into electric

More information

VTU NOTES QUESTION PAPERS NEWS RESULTS FORUMS UNIT 8

VTU NOTES QUESTION PAPERS NEWS RESULTS FORUMS UNIT 8 UNIT 8 (a) Interfacing resistive transducers to electronic circuits. Introduction to data acquisition systems. 2 Hours (b) Display Devices and Signal Generators: X-Y recorders. Nixie tubes. LCD and LED

More information

*Notebook is excluded

*Notebook is excluded Biomedical Measurement Training System This equipment is designed for students to learn how to design specific measuring circuits and detect the basic physiological signals with practical operation. Moreover,

More information

* Notebook is excluded. Features KL-720 contains nine modules, including Electrocardiogram Measurement, E lectromyogram Measurement,

* Notebook is excluded. Features KL-720 contains nine modules, including Electrocardiogram Measurement, E lectromyogram Measurement, KL-720 Biomedical Measurement System Supplied by: 011 683 4365 This equipment is intended for students to learn how to design specific measuring circuits and detect the basic physiological signals with

More information

Electro-hydraulic Servo Valve Systems

Electro-hydraulic Servo Valve Systems Fluidsys Training Centre, Bangalore offers an extensive range of skill-based and industry-relevant courses in the field of Pneumatics and Hydraulics. For more details, please visit the website: https://fluidsys.org

More information

EMG click PID: MIKROE-2621

EMG click PID: MIKROE-2621 EMG click PID: MIKROE-2621 EMG click measures the electrical activity produced by the skeletal muscles. It carries MCP609 operational amplifier and MAX6106 micropower voltage reference. EMG click is designed

More information

L T P EE 441: Analog Electronics (EE/IE) (3 1 3) Theory Marks =100 Sessional Marks = 50 Laboratory Marks = 50 Time = 3 hours

L T P EE 441: Analog Electronics (EE/IE) (3 1 3) Theory Marks =100 Sessional Marks = 50 Laboratory Marks = 50 Time = 3 hours EE 441: Analog Electronics (EE/IE) (3 1 3) 1. Bond Model of silicon crystal: Intrinsic carrier concentration, Effect of doping on carrier concentration. Holes and electrons, Majority and Minority carriers,

More information

Ultrasonic. Advantages

Ultrasonic. Advantages Ultrasonic Advantages Non-Contact: Nothing touches the target object Measures Distance: The distance to the target is measured, not just its presence Long and Short Range: Objects can be sensed from 2

More information

System Inputs, Physical Modeling, and Time & Frequency Domains

System Inputs, Physical Modeling, and Time & Frequency Domains System Inputs, Physical Modeling, and Time & Frequency Domains There are three topics that require more discussion at this point of our study. They are: Classification of System Inputs, Physical Modeling,

More information

Downloaded from Downloaded from

Downloaded from  Downloaded from IV SEMESTER FINAL EXAMINATION- 2002 SUBJECT: BEG232EC, Instrumentation Candidates are required to give their answers in their own words as far as practicable. The figure in the margin indicates full marks.

More information

Electronic Concepts and Troubleshooting 101. Experiment 1

Electronic Concepts and Troubleshooting 101. Experiment 1 Electronic Concepts and Troubleshooting 101 Experiment 1 o Concept: What is the capacity of a typical alkaline 1.5V D-Cell? o TS: Assume that a battery is connected to a 20Ω load and the voltage across

More information

CHAPTER 3 SINGLE SOURCE MULTILEVEL INVERTER

CHAPTER 3 SINGLE SOURCE MULTILEVEL INVERTER 42 CHAPTER 3 SINGLE SOURCE MULTILEVEL INVERTER 3.1 INTRODUCTION The concept of multilevel inverter control has opened a new avenue that induction motors can be controlled to achieve dynamic performance

More information

Communication and signals. Book page Syllabus

Communication and signals. Book page Syllabus Communication and signals Book page 103 105 Syllabus 3.23 3.25 What do these have to do with one another? Homer and the Internet What are the codes they use? Do you know what changed WWII? The Imitation

More information

The units of vibration depend on the vibrational parameter, as follows:

The units of vibration depend on the vibrational parameter, as follows: Vibration Measurement Vibration Definition Basically, vibration is oscillating motion of a particle or body about a fixed reference point. Such motion may be simple harmonic (sinusoidal) or complex (non-sinusoidal).

More information

Experiment 1: Fraunhofer Diffraction of Light by a Single Slit

Experiment 1: Fraunhofer Diffraction of Light by a Single Slit Experiment 1: Fraunhofer Diffraction of Light by a Single Slit Purpose 1. To understand the theory of Fraunhofer diffraction of light at a single slit and at a circular aperture; 2. To learn how to measure

More information

Table of Contents...2. About the Tutorial...6. Audience...6. Prerequisites...6. Copyright & Disclaimer EMI INTRODUCTION Voltmeter...

Table of Contents...2. About the Tutorial...6. Audience...6. Prerequisites...6. Copyright & Disclaimer EMI INTRODUCTION Voltmeter... 1 Table of Contents Table of Contents...2 About the Tutorial...6 Audience...6 Prerequisites...6 Copyright & Disclaimer...6 1. EMI INTRODUCTION... 7 Voltmeter...7 Ammeter...8 Ohmmeter...8 Multimeter...9

More information

AVO CT 160 Meter Protection

AVO CT 160 Meter Protection AVO CT 160 Meter Protection The following oscillograms show that with a real valve the voltage across the standard CT 160 meter (3250 Ohm, 30 ua f.s.) does not become flat zero when the Anode current is

More information

1 Analog and Digital Communication Lab

1 Analog and Digital Communication Lab 1 2 Amplitude modulator trainer kit diagram AM Detector trainer kit Diagram 3 4 Calculations: 5 Result: 6 7 8 Balanced modulator circuit diagram Generation of DSB-SC 1. For the same circuit apply the modulating

More information

BEE 2233 Digital Electronics. Chapter 1: Introduction

BEE 2233 Digital Electronics. Chapter 1: Introduction BEE 2233 Digital Electronics Chapter 1: Introduction Learning Outcomes Understand the basic concept of digital and analog quantities. Differentiate the digital and analog systems. Compare the advantages

More information

EE T55 MEASUREMENTS AND INSTRUMENTATION

EE T55 MEASUREMENTS AND INSTRUMENTATION EE T55 MEASUREMENTS AND INSTRUMENTATION UNIT V: TRANSDUCERS Temperature transducers-rtd, thermistor, Thermocouple-Displacement transducer-inductive, capacitive, LVDT, Pressure transducer Bourdon tube,

More information

Subject-wise Tests Tests will be activated at 06:00 pm on scheduled day

Subject-wise Tests Tests will be activated at 06:00 pm on scheduled day Subject Name EE-01 Control Systems EE-02 Systems and Signal Processing EE-03 Analog and Digital Electronics EE-04 Engineering Mathematics and Numerical Analysis EE-05 Electric Circuits and Fields EE-06

More information

DEPT: II EEE EE6404-MEASUREMENT & INSTRUMENTATION 2MARK: UNIT-1. An instrument is a device for determining the value or magnitude of a quantity.

DEPT: II EEE EE6404-MEASUREMENT & INSTRUMENTATION 2MARK: UNIT-1. An instrument is a device for determining the value or magnitude of a quantity. DEPT: II EEE 2MARK: UNIT-1 1. Define instrument. An instrument is a device for determining the value or magnitude of a quantity. 2. What are the types of instruments? a. Mechanical instrument b. Electrical

More information

PHYSICS 330 LAB Operational Amplifier Frequency Response

PHYSICS 330 LAB Operational Amplifier Frequency Response PHYSICS 330 LAB Operational Amplifier Frequency Response Objectives: To measure and plot the frequency response of an operational amplifier circuit. History: Operational amplifiers are among the most widely

More information

Electronic Instrumentation & Automation. ET-7th semester. By : Rahul Sharma ET & TC Deptt. RCET, Bhilai

Electronic Instrumentation & Automation. ET-7th semester. By : Rahul Sharma ET & TC Deptt. RCET, Bhilai Electronic Instrumentation & Automation ET-7th semester By : Rahul Sharma ET & TC Deptt. RCET, Bhilai UNIT: III Voltage and Current Measurements Digital Voltmeters: Non-Integrating type, Integrating Type,

More information

SAMPLE OF THE STUDY MATERIAL PART OF CHAPTER 2 Measurements of Basic Electrical Quantities 1 (Current Voltage, Resistance)

SAMPLE OF THE STUDY MATERIAL PART OF CHAPTER 2 Measurements of Basic Electrical Quantities 1 (Current Voltage, Resistance) SAMPLE OF THE STUDY MATERIAL PART OF CHAPTER 2 Measurements of Basic Electrical Quantities 1 (Current Voltage, Resistance) 2.1 Indicating Instruments Analog Instruments: An analog device is one in which

More information

Automatic Control System

Automatic Control System Sensor types Automatic Control System Automatic Control System Construction Material or Power Object Output Signal Sensor Disturbances Converter Measuring Device Controller Industry Controller Executive

More information

Amplitude modulator trainer kit diagram

Amplitude modulator trainer kit diagram Amplitude modulator trainer kit diagram AM Detector trainer kit Diagram Calculations: Result: Pre lab test (20) Observation (20) Simulation (20) Remarks & Signature with Date Circuit connection (30) Result

More information

INSTRUMENTATION AND CONTROL TUTORIAL 3 SIGNAL PROCESSORS AND RECEIVERS

INSTRUMENTATION AND CONTROL TUTORIAL 3 SIGNAL PROCESSORS AND RECEIVERS INSTRUMENTATION AND CONTROL TUTORIAL 3 SIGNAL PROCESSORS AND RECEIVERS This tutorial provides an overview of signal processing and conditioning for use in instrumentation and automatic control systems.

More information

Biomedical Engineering Evoked Responses

Biomedical Engineering Evoked Responses Biomedical Engineering Evoked Responses Dr. rer. nat. Andreas Neubauer andreas.neubauer@medma.uni-heidelberg.de Tel.: 0621 383 5126 Stimulation of biological systems and data acquisition 1. How can biological

More information

PRINCIPLES OF RADAR. By Members of the Staff of the Radar School Massachusetts Institute of Technology. Third Edition by J.

PRINCIPLES OF RADAR. By Members of the Staff of the Radar School Massachusetts Institute of Technology. Third Edition by J. PRINCIPLES OF RADAR By Members of the Staff of the Radar School Massachusetts Institute of Technology Third Edition by J. Francis Reintjes ASSISTANT PBOFESSOR OF COMMUNICATIONS MASSACHUSETTS INSTITUTE

More information

Industrial Sensors. Proximity Mechanical Optical Inductive/Capacitive. Position/Velocity Potentiometer LVDT Encoders Tachogenerator

Industrial Sensors. Proximity Mechanical Optical Inductive/Capacitive. Position/Velocity Potentiometer LVDT Encoders Tachogenerator Proximity Mechanical Optical Inductive/Capacitive Position/Velocity Potentiometer LVDT Encoders Tachogenerator Force/Pressure Vibration/acceleration Industrial Sensors 1 Definitions Accuracy: The agreement

More information

2.017 DESIGN OF ELECTROMECHANICAL ROBOTIC SYSTEMS Fall 2009 Lab 4: Motor Control. October 5, 2009 Dr. Harrison H. Chin

2.017 DESIGN OF ELECTROMECHANICAL ROBOTIC SYSTEMS Fall 2009 Lab 4: Motor Control. October 5, 2009 Dr. Harrison H. Chin 2.017 DESIGN OF ELECTROMECHANICAL ROBOTIC SYSTEMS Fall 2009 Lab 4: Motor Control October 5, 2009 Dr. Harrison H. Chin Formal Labs 1. Microcontrollers Introduction to microcontrollers Arduino microcontroller

More information

2008 D AI Prove that the current density of a metallic conductor is directly proportional to the drift speed of electrons.

2008 D AI Prove that the current density of a metallic conductor is directly proportional to the drift speed of electrons. 2008 D 1. Prove that the current density of a metallic conductor is directly proportional to the drift speed of electrons. 2. A number of identical cells, n, each of emf E, internal resistance r connected

More information

Figure 4.1 Vector representation of magnetic field.

Figure 4.1 Vector representation of magnetic field. Chapter 4 Design of Vector Magnetic Field Sensor System 4.1 3-Dimensional Vector Field Representation The vector magnetic field is represented as a combination of three components along the Cartesian coordinate

More information

Where: (J LM ) is the load inertia referred to the motor shaft. 8.0 CONSIDERATIONS FOR THE CONTROL OF DC MICROMOTORS. 8.

Where: (J LM ) is the load inertia referred to the motor shaft. 8.0 CONSIDERATIONS FOR THE CONTROL OF DC MICROMOTORS. 8. Where: (J LM ) is the load inertia referred to the motor shaft. 8.0 CONSIDERATIONS FOR THE CONTROL OF DC MICROMOTORS 8.1 General Comments Due to its inherent qualities the Escap micromotor is very suitable

More information

ELECTRONIC FUNDAMENTALS

ELECTRONIC FUNDAMENTALS Part 66 Cat. B1 Module 4 ELECTRONIC FUNDAMENTALS Vilnius-2017 Issue 1. Effective date 2017-02-28 FOR TRAINING PURPOSES ONLY Page 1 of 67 Figure 1-4. Standard diode color code system Color Digit Diode suffix

More information

DC SERVO MOTOR CONTROL SYSTEM

DC SERVO MOTOR CONTROL SYSTEM DC SERVO MOTOR CONTROL SYSTEM MODEL NO:(PEC - 00CE) User Manual Version 2.0 Technical Clarification /Suggestion : / Technical Support Division, Vi Microsystems Pvt. Ltd., Plot No :75,Electronics Estate,

More information

Lab E5: Filters and Complex Impedance

Lab E5: Filters and Complex Impedance E5.1 Lab E5: Filters and Complex Impedance Note: It is strongly recommended that you complete lab E4: Capacitors and the RC Circuit before performing this experiment. Introduction Ohm s law, a well known

More information

Physiological Signal Processing Primer

Physiological Signal Processing Primer Physiological Signal Processing Primer This document is intended to provide the user with some background information on the methods employed in representing bio-potential signals, such as EMG and EEG.

More information

Using Rank Order Filters to Decompose the Electromyogram

Using Rank Order Filters to Decompose the Electromyogram Using Rank Order Filters to Decompose the Electromyogram D.J. Roberson C.B. Schrader droberson@utsa.edu schrader@utsa.edu Postdoctoral Fellow Professor The University of Texas at San Antonio, San Antonio,

More information

Speed Control of BLDC Motor Using FPGA

Speed Control of BLDC Motor Using FPGA Speed Control of BLDC Motor Using FPGA Jisha Kuruvilla 1, Basil George 2, Deepu K 3, Gokul P.T 4, Mathew Jose 5 Assistant Professor, Dept. of EEE, Mar Athanasius College of Engineering, Kothamangalam,

More information

Position Sensors. The Potentiometer.

Position Sensors. The Potentiometer. Position Sensors In this tutorial we will look at a variety of devices which are classed as Input Devices and are therefore called "Sensors" and in particular those sensors which are Positional in nature

More information

COOPERATIVE PATENT CLASSIFICATION

COOPERATIVE PATENT CLASSIFICATION CPC H H03 COOPERATIVE PATENT CLASSIFICATION ELECTRICITY (NOTE omitted) BASIC ELECTRONIC CIRCUITRY H03B GENERATION OF OSCILLATIONS, DIRECTLY OR BY FREQUENCY-CHANGING, BY CIRCUITS EMPLOYING ACTIVE ELEMENTS

More information

EE ELECTRICAL ENGINEERING AND INSTRUMENTATION

EE ELECTRICAL ENGINEERING AND INSTRUMENTATION EE6352 - ELECTRICAL ENGINEERING AND INSTRUMENTATION UNIT V ANALOG AND DIGITAL INSTRUMENTS Digital Voltmeter (DVM) It is a device used for measuring the magnitude of DC voltages. AC voltages can be measured

More information

Analog Multimeter. household devices.

Analog Multimeter. household devices. 1 Analog Multimeter A multimeter or a multitester, a.k.a.vom (volt-ohmmilliammeter), is an electronic measuring instrument that combines several measurement functions in one unit. A typical multimeter

More information