Cable Management Solutions. Sales Hotline: Sales Fax: Edition 5

Transcription

1 Cable Management Solutions Edition 5 Sales Hotline: Sales Fax:

2 Welcome to Marco Cable Mangement Welcome to the fourth Marco Cable Management catalogue. After extensive research, Marco identified an opportunity to develop a new Cat 6 trunking design which offers The minimum 50mm bend radius requirement for Cat 6 cables is maintained throughout the trunking improved installation times and superior product system including flat angles and tees. The overall depth performance. Its design evolved following detailed discussions with installers and has resulted in what we of the trunking is 60mm, allowing up to 50mm deep accessory boxes to be used when required. feel is the best Cat 6 data cable trunking system available Installers and specifiers alike are impressed with the today. unique features of the Marco Apollo 60 data trunking We have achieved this by introducing several design system. innovations, which will resolve many common irritations We have expanded the wire cable tray section to include currently suffered by installers. installation information on how to construct large and Marco recognised the need to provide better access to the trunking when cabling the power circuit cables. Marco s Apollo 60 data trunking features a unique topopening small radius bends, tees and reducers, and have provided coupler recommendations and tables showing permissible loads for different spans. lid which allows cables to be placed easily in situ. Finally we are delighted to have become an ISO9001: This design ensures the job is done quickly and easily 2000 registered company, underlining our continuous and as a result, saves money. commitment to quality. The research also indentified the need for trunking lids to It is our aim to provide a first class service by holding all be snapped easily into place. The Apollo 60 data trunking products in stock for immediate despatch. system base is rigid and therefore more stable thus removing yet another frustration for installers. Combined with the improved installation features, Marco has incorporated yet another unique feature into the new Cat 6 trunking with the aim of enhancing overall performance. To comply with standards, data cables and power cables must be kept 50mm apart and separated by a steel screen. Marco s Apollo 60 data trunking system features a steel screen which spans the full width of the data cable compartment. For product samples and more information contact Marco s sales office on , or info@marcocableman.co.uk Ian MacGregor Managing Director 2 Sales Hotline: Sales sales@marcocableman.co.uk

3 The marco product range includes: Index Index Marco upvc trunking systems Apollo 60 data trunking Page Apollo 60 data trunking Apollo three compartment dado & skirting trunking Apollo four compartment dado & skirting trunking Juno single dado compartment trunking Marco aluminium products Apollo dado trunking Power pole Power post Bench trunking & bench trunking units Marco wire cable tray Apollo 4 compartment dado trunking Wire cable tray Wire cable tray system Wire cable tray accessories Marco wire cable tray installation guides Juno single compartment dado trunking Tee-junction with radius & crossovers Tee-junction with right angle & crossovers Reducers Large radius bends Small radius bends Right angle radius Power pole & post Marco wire cable tray technical information Wall support bracket recommendations Suspension hanger recommendations Coupler recommendations Bench trunking Wire cable tray 3

4 Apollo 60 Data trunking system Apollo 60 Data trunking system Marco s Apollo 60 data trunking system has been designed to offer reduced installation times and to meet the standard required for a Cat 6 cabling solution. The Apollo 60 s unique top opening lid allows power cables to be installed easily and speedily. Should additional power cable wiring space be required further capacity can be obtained using the optional clip in divider. A 50mm minimum bend radius is provided for all Marco Apollo 60 data fittings including flat angles, tees, internal and external angles. All cables can be laid into place avoiding the need to thread cables through apertures, thus ensuring that all of the Marco fittings are easy to install and to wire. MT60 An optional steel screen is available which spans the full width of the data compartment. Apollo 60 data trunking can accommodate 25mm, 35mm and 50mm accessory boxes. KEY DESIGN FEATURES The unique top lid easily clips on allowing for fast power cable installation, thus removing the need to insert cables from underneath. 200m 21.5 mm 80mm 190m A shelf can be added to the trunking to allow for additional power cable capacity. All lids are rigidly supported and easily snapped into place. All bends maintain the strict 50mm radius required for data cables to conform to the necessary standards. 67.5m 60mm 63mm The data compartment can accommodate over 60 Cat-6 data cables, or over 100 Cat-5e. The metal screening simply slots into place and covers the full profile of the trunking to conform to the required standards. The outlet box compartment can support 25mm, 35mm and the new 50mm deep socket mounting boxes. 4 MT60FU Standards Marco Cable Management Apollo 60 Data Trunking System conforms to the following standards: BS4678 Part 4, BSEN , BS7671 (IEE regs) BS6701, ANSI/TIA/EIA 568B, ISO IEC 11801

5 Lifting the Lid on the Cat-6 Revolution Apollo 60 Data trunking system Marco Apollo 60 Data Trunking MT60T MT60FU MT60J MT60CL MT60CR Code No Description Pack Size MT60 Data trunking 2 x 3m MT60T Flat tee 1 MT60FU Flat angle 1 MT60E External angle 1 MT60I Internal angle 1 MT60J Joint cover 5 MT60CL End cover left hand 2 MT60CR End cover right hand 2 MT60SD Screening divider 4 x 2m MT60SDE External angle screening divider 1 ** Internal and external fittings supplied as a two-part kit in order to maintain the required 50mm radius around bends MT60E - KIT ** MT60I - KIT ** NEW 50mm MTSB1-50 MTSB2-50 MTSB1 MTSB2 MTSB1-25 MTSB2-25 Code No Description Pack Size MTD105 MTRCDH MTCR MTLS Apollo 60 trunking fabricated fittings can be supplied with steel screening divider ready installed. Please add suffix SD to the standard catalogue number MTSB1-50 Socket mounting box 50mm 1-gang 10 MTSB2-50 Socket mounting box 50mm 2-gang 10 MTSB1 Socket mounting box 35mm 1-gang 10 MTSB2 Socket mounting box 35mm 2-gang 10 MTSB1-25 Socket mounting box 25mm 1-gang 10 MTSB2-25 Socket mounting box 25mm 2-gang 10 MTD105 Divider 16 x 1.5m MTRCDH RCD/MCB Din rail housing unit 1 MTCR Cable retainer 10 MTLS Accessory spacer 10 Sales sales@marcocableman.co.uk Sales Hotline: Marco Fax:

6 Apollo trunking systems Marco Apollo three compartment dado & skirting trunking Available in both dado and skirting versions, Apollo trunking offers either three or four separate compartments for power, data and telecommunications cables. The four-compartment Apollo trunking provides two large centre sections, ideal for applications where larger cabling needs exist. MTD3 Marco Apollo trunking has several benefits for the contractor which will help keep installation times and costs to a minimum. The outer compartments have been specifically created to provide maximum capacity for data cables. The Marco socket boxes are designed to make installation of accessories quick and easy. They are available in two sizes, the standard 35mm deep version, and a 25mm deep version which is available for applications that require more wiring space. DADO DADO SQUARE SKIRTING 170mm 170mm 170mm MTD3 MTDQ3 MTS3 MTS3 50mm 50mm 50mm CHARCOAL GREY LIGHT OAK New wood effect laminates now available. Please call our Sales Hotline for further information. Wide range of RAL colours available 6 MTDQ3 Standards Marco upvc trunking conforms to the following standards: BS4678 Part 4, BSEN , BS7671 (IEE regs) BS6701, ANSI/TIA/EIA 568B, ISO IEC 11801

7 Accessories & Fittings MTDT3 MTDF3 MTDE3 MTDI3 MTDJ3 MTDC3 MTDQT3 MTDQF3 MTDQE3 MTDQI3 MTDQJ3 MTDQC3 Dado Trunking Code No Description Pack Size MTD3 Three compartment dado trunking 2 x 3m MTDT3 Flat tee 1 MTDF3 Flat angle 1 MTDE3 External angle 1 MTDI3 Internal angle 1 MTDJ3 Joint cover 5 MTDC3 End cover 2 Dado Trunking, Square Top & Bottom Code No Description Pack Size MTDQ3 Three compartment dado trunking 2 x 3m MTDQT3 Flat tee 1 MTDQF3 Flat angle 1 MTDQE3 External angle - 2 piece fitting 1 MTDQI3 Internal angle - 2 piece fitting 1 MTDQJ3 Joint cover - 2 piece fitting 5 MTDQC3 End cover - 2 piece fitting 2 Apollo trunking systems Skirting Trunking MTST3 MTSF3D MTSF3U MTSE3 MTSI3 Code No Description Pack Size MTS3 Three compartment skirting trunking 2 x 3m MTST3 Flat tee 1 MTSF3D Flat angle - downward 1 MTSF3U Flat angle - upward 1 MTSE3 External angle 1 MTSI3 Internal angle 1 MTSJ3 Joint cover 5 MTSCL3 End cover LH 2 MTSCR3 End cover RH 2 MTSJ3 MTSCL3 MTSCR3 Also available in component form under the following references: Code No Description Pack Size MT3B1 Apollo base 2 x 3m MT3CL Apollo centre lid 10 x 3m MT3AL Apollo angled lid 10 x 3m MT3SL Apollo square lid 10 x 3m Universal Items MTSB1 MTSB2 MTSB1-25 MTSB2-25 MTCR MTLS MTRCDH Code No Description Pack Size MTSB1 Socket mounting box 35mm 1-gang 10 MTSB2 Socket mounting box 35mm 2-gang 10 MTSB1-25 Socket mounting box 25mm 1-gang 10 MTAS - SCREENING SECURITY FITTINGS MTSB2-25 Socket mounting box 25mm 2-gang 10 MTCR Cable retainer 20 MTLS Accessory spacers 10 MTRCDH RCD/MCB DIN Rail Housing System 1 SECURITY FITTINGS Security fittings are available for internal & external angles, joint & end covers, for all Apollo range trunkings. Screening is available for all Apollo trunkings MTAS Screening 4 x 2m Please add suffix - SF to the standard catalogue number. Sales sales@marcocableman.co.uk Sales Hotline: Marco Fax:

8 Apollo four conpartment trunking Marco Apollo four compartment dado & skirting trunking Available in both dado and skirting versions, Apollo four compartment trunking offers separate compartments for power, data and telecommunication cables. This new four-compartment Apollo trunking provides two large centre compartments, ideal for those applications where larger data needs exist. MT4K1 + MTD3 DADO DADO SQUARE SKIRTING Code No Description Pack Size MT4K1 4 compartment trunking extension 4 x 3m Code No Dado Trunking - Fittings MTDT4 Flat tee 1 MTDF4 Flat angle 1 MTDE4 External angle - 2 piece fitting 1 MTDI4 Internal angle - 2 piece fitting 1 MTDJ4 Joint cover - 2 piece fitting 5 MTDC4 End cover - 2 piece fitting 2 Code No Dado Trunking, Square top & Bottom - Fittings MTDQT4 Flat tee 1 MTDQF4 Flat angle 1 MTDQE4 External angle - 2 piece fitting 1 MTDQI4 Internal angle - 2 piece fitting 1 MTDQJ4 Joint cover - 2 piece fitting 5 MTDQC4 End cover - 2 piece fitting 2 Code No Skirting Trunking - Fittings MTST4 Flat tee 1 MTSF4U Flat angle - upward 1 MTSF4D Flat angle - downward 1 MTSE4 External angle - 2 piece fitting 1 MTSI4 Internal angle - 2 piece fitting 1 MTSJ4 Joint cover - 2 piece fitting 5 MTSCL4 End cover LH - 2 piece fitting 2 MTSCR4 End cover RH - 2 piece fitting 2 MTDT4 MTDF4 MTSE4 MTAS - SCREENING SECURITY FITTINGS SECURITY FITTINGS Security fittings are available for internal & external angles, joint & end covers, for all Apollo range trunkings. Please add suffix - SF to the standard catalogue number. Wide range of RAL colours available 8 Screening is available for all Apollo trunkings MTAS Screening 4 x 2m Standards Marco upvc trunking conforms to the following standards: BS4678 Part 4, BSEN , BS7671 (IEE regs) BS6701, ANSI/TIA/EIA 568B, ISO IEC 11801

9 Marco Juno single compartment dado trunking Marco Juno Marco Juno is a single compartment dado trunking system, which can be subdivided by means of divider strip, for power, data and telecommunication cables. The positions of the divider fixing points allow for two, three or four compartments to be made depending on installation needs. 100 mm MT105 50mm MT105 Code No Description - Juno Pack Size MT105 Single compartment trunking 2 x 3m MTT105 Flat tee 1 MTF105 Flat angle 1 MTE105 External angle 1 MTI105 Internal angle 1 MTJ105 Joint cover 5 MTT105 MTF105 MTE105 MTI105 MTJ105 MTC105 MTC105 End cover 2 MTD105 Divider 16 x 1.5m Apollo & Juno Universal Items Code No Universal Items Pack Size MTSB1 Socket mounting box 35mm 1-gang 10 MTSB2 Socket mounting box 35mm 2-gang 10 MTSB1-25 Socket mounting box 25mm 1-gang 10 MTSB2-25 Socket mounting box 25mm 2-gang 10 MTCR Cable retainer 20 MTSB1 MTSB2 MTSB1-25 MTSB2-25 MTRCDH RCD/MCB Din rail housing unit 1 MTLS Accessory spacers 10 Screening is available for all Apollo trunkings MTAS Screening 4 x 2m MTD105 MTRCDH MTCR MTLS SECURITY FITTINGS Security fittings are available for internal & external angles, joint & end covers, for all Apollo range trunkings. Please add suffix - SF to the standard catalogue number. MTAS - SCREENING SECURITY FITTINGS Sales sales@marcocableman.co.uk Sales Hotline: Marco Fax:

10 Power Pole & Post Marco power pole The double sided Marco power pole has the benefit of a strong aluminium profile designed to retain its rigidity in all installation situations. The length of the power pole can easily be modified on site and a height-adjusting locking mechanism is supplied. The pole benefits from 35mm deep accessory boxes for quick and easy installation of accessories. A 1 metre aluminium power pole extension is available, and Marco can supply power poles up to 5 metres in length, normally from stock. Each Marco power pole is supplied with six accessory boxes, ceiling shroud, floor boot, accessory spacers to help speed installation, and six metres of upvc divider. Marco power post Double Sided The double sided Marco power post is used in much the same way as the power pole, but transfers wiring up from the floor, rather than down from the ceiling. It is able to conceal wiring effectively and to conveniently position sockets, which is of particular benefit in offices and other application areas. MTPP1 - Power Post MTLS MTD105 Marco power posts have a metal plate on the underside which is fixed securely to the floor, and a strong steel rod that extends from the plate through to the top of the post to give the product added strength. Power posts can be fabricated to specific sizes if necessary. Should you require any further information then please contact our sales office. MTP1 - Power Pole Double Sided MTPSB1 MTRCDH Code No Description Pack Size MTP1 Power Pole aluminium body, upvc Lids 3.6m 1 MTP1E1 Power Pole Extension Kit. 1m 1 MTPP1 Power Post, aluminium body, upvc Lids 0.65m 1 MTLS Accessory spacers 10 MTD105 Divider 16 x 1.5m MTPSB1 Socket mounting box 35mm 1-gang 5 MTRCDH RCD/MCB DIN Rail Housing System 1 The power post is capped with a pyramidal top, and is supplied with a floor boot, six accessory boxes, upvc divider and accessory spacers. The accessory spacers, which are fitted between the socket boxes, help to reduce installation times. 10

11 MTBT Bench trunking Code No Description Pack Size Marco bench trunking Marco bench trunking is manufactured from satin anodised aluminium and has a white upvc lid. A full range of moulded and fabricated fittings are available, and 35mm and 25mm Marco accessory boxes can be installed at any point along the bench trunking system. MTBT Bench trunking aluminium body, upvc Lid 1 x 2m MTBTI Internal angle 1 MTBTE External angle 1 MTBC End cover 2 MTBJ Joint cover 2 MTD1052 Divider 10 x 2m MTPSB1 Socket mounting box 35mm 1-gang 5 MTPSB2 Socket mounting box 35mm 2-gang 5 MTPSB1-25 Socket mounting box 25mm 1-gang 5 MTPSB2-25 Socket mounting box 25mm 2-gang 5 MTLS Accessory spacers 10 MTRCDH RCD/MCB DIN Rail Housing System 1 MTRCDH MTBTI MTBTE MTPSB1 MTPSB2 MTPSB1-25 MTPSB2-25 MTCR MTLS MTBJ MTBC MTD1052 Marco bench trunking units Our popular bench trunking units are available in onegang, two-gang or combined one and two-gang socket mounting boxes. Additional combinations can be supplied to order. For the convenience of the installer, all bench trunking products can be supplied pre-wired. Please contact the Marco Sales Hotline on if you require further information. MTBU3 MTBU2 MTBU1 Code No Description Pack Size MTBU1 1-gang bench trunking unit 1 MTBU2 2-gang bench trunking unit 1 MTBU3 1 & 2-gang bench trunking unit 1 Sales sales@marcocableman.co.uk Sales Hotline: Marco Fax:

12 Marco Power wire Pole cable & Post tray Marco wire cable tray Available in electro-zinc and hot-dipped galvanised finishes, Marco wire cable tray is offered in threedepths 30mm, 55mm and 106mm. A wide range of fittings is available to join and support the wire tray. In comparison to conventional tray, Marco wire cable tray is light in weight, enabling bends to be easily fabricated on site. The design makes installation quick and convenient, thereby reducing on-site costs. 30mm Wire Cable Tray Marco is the largest UK manufacturer of wire cable tray, and considerable amounts of all sizes are kept in stock. Orders can usually be despatched same day. The Marco wire cable tray installation guides can be viewed on pages Technical information is available on page 23 as well as on our website. Cable Tray Dividers 55mm Wire Cable Tray MCD30 MCD55 MCD mm Wire Cable Tray Code No Size Finish Pack Size MCD30 30mm x 3m PG 1 MCD55 55mm x 3m PG 1 MCD mm x 3m PG 1 12 Sales sales@marcocableman.co.uk Standards Marco wire cable tray conforms to the following standards: BSEN 61537:2002, IEC 61537

13 The photograph below is an example of a large radius bend Marco wire cable tray Code No Size Finish Pack Size MC mm x 50mm EZ & HDG 1 MC mm x 100mm EZ & HDG 1 MC mm x 150mm EZ & HDG 1 MC mm x 200mm EZ & HDG 1 MC mm x 300mm EZ & HDG 1 MC mm x 50mm EZ & HDG 1 MC mm x 100mm EZ & HDG 1 MC mm x 150mm EZ & HDG 1 MC mm x 200mm EZ & HDG 1 MC mm x 300mm EZ & HDG 1 MC mm x 400mm EZ & HDG 1 MC mm x 450mm EZ & HDG 1 MC mm x 500mm EZ & HDG 1 MC mm x 600mm EZ & HDG 1 MC mm x 100mm EZ & HDG 1 MC mm x 150mm EZ & HDG 1 MC mm x 200mm EZ & HDG 1 MC mm x 300mm EZ & HDG 1 MC mm x 400mm EZ & HDG 1 MC mm x 450mm EZ & HDG 1 Wire Cable Tray Lid MC mm x 500mm EZ & HDG 1 MC mm x 600mm EZ & HDG 1 Code No Description Tray Width Pack Size MCL100 Wire Tray Lid - 2m long 100mm 1 MCL150 Wire Tray Lid - 2m long 150mm 1 MCL200 Wire Tray Lid - 2m long 200mm 1 MCL300 Wire Tray Lid - 2m long 300mm 1 MCL400 Wire Tray Lid - 2m long 400mm 1 MCL450 Wire Tray Lid - 2m long 450mm 1 MCL500 Wire Tray Lid - 2m long 500mm 1 MCL600 Wire Tray Lid - 2m long 600mm 1 Finishes: Electro-zinc (EZ) Hot-dip galvanised (HDG) Pre-galvanised (PG) The standard length of Marco wire cable tray and tray divider is 3 metres. Sales Hotline: Marco Fax:

14 Wire cable tray system MCWB Wall bracket MCHDB Heavy duty bracket MCWFB Fast Fix wall bracket MCFCP Flexible conduit plate MCSH Suspension hanger MCCA Nut, bolt & clamp assembly MCAMP Accessory mounting plate MCCL Two MCCL large clamps with MCH620NW hex head screw and flanged nut MCCB Cantilever bracket MCSP Splice plate MCSB100 Suspension bracket for MC30100 and MC Sales Hotline: Marco Fax:

15 Marco wire cable tray system MCQC Quick coupler Wire cable tray system MCAMP Wall bracket - use with MC5550 tray MCFFB Fast Fix floor bracket MCWB Floor bracket MCFSC Fast Fix support channel MCCFB Fast Fix ceiling bracket MCSB Suspension bracket, self-locking MCSB50 Suspension bracket for MC3050 and MC5550 Bends, T-Junctions and Crossovers are easily fabricated on site using MCCA clamps and MCSP splice plates MCB35 Bracket for MC3050 and MC5550 MCTS35 Tray support bracket for MC3050 and MC5550 Sales sales@marcocableman.co.uk 15

16 Wire Power Tray Pole Accessories & Post Accessories All accessories also shown on pages MCQC MCCA MCCB MCCS MCCM MCCL MCM620 MCM620NW MCSP MCSP90 MCSB MCSH MCAMP MCFCP MCFFB MCB35 MCTS35 MCSB50 MCSB100 Code No Description Finish Pack Size 16 MCQC Quick coupler EZ 50 MCCA Nut, bolt & clamp assembly EZ 50 MCCB Nut, bolt & clamp assembly EZ 50 MCCS Clamp small EZ & HDG 100 MCCM Clamp medium EZ & HDG 100 MCCL Clamp large EZ & HDG 50 MCM620 M6 x 20 screw EZ 100 MCM620NW M6 x 20 screw, nut & washer EZ 100 MCSP Splice plate PG 10 MCSP90 Splice plate with 90 degree bend PG 10 MCSB Suspension bracket - self locking PG 2 MCSH Suspension hanger EZ & HDG 50 MCAMP Wall bracket / acc mounting plate PG 1 MCFCP Flexible conduit plate PG 1 MCFFB Fast Fix floor bracket PG 1 MCB35 Bracket for MC3050 & MC5550 PG 1 MCTS35 Tray support bracket for MC3050 & MC5550 PG 1 MCSB50 Suspension bracket for MC3050 & MC5550 PG 1 MCSB100 Suspension bracket for MC30100 & MC55100 PG 1 MCROP Bolt croppers 1 Finishes: Electro-zinc (EZ) Hot-dip galvanised (HDG) Pre-galvanised (PG) MCROP Sales Hotline: Marco Fax:

17 Code No Description Tray Width Finish Pack Size MCFSC100 Fast Fix Support Channel 100mm PG 1 MCFSC150 Fast Fix Support Channel 150mm PG 1 MCFSC200 Fast Fix Support Channel 200mm PG 1 MCFSC300 Fast Fix Support Channel 300mm PG 1 MCFSC400 Fast Fix Support Channel 400mm PG 1 MCFSC450 Fast Fix Support Channel 450mm PG 1 MCFSC500 Fast Fix Support Channel 500mm PG 1 MCFSC600 Fast Fix Support Channel 600mm PG 1 MCFSC1000 Fast Fix Support Channel - PG 1 Accessories All accessories also shown on pages Wire Tray Accessories Code No Description Tray Width Finish Pack Size MCWFB100 Fast Fix Wall Bracket 100mm PG 1 MCWFB150 Fast Fix Wall Bracket 150mm PG 1 MCWFB200 Fast Fix Wall Bracket 200mm PG 1 MCWFB300 Fast Fix Wall Bracket 300mm PG 1 MCWFB400 Fast Fix Wall Bracket 400mm PG 1 MCWFB450 Fast Fix Wall Bracket 450mm PG 1 Code No Description Tray Width Finish Pack Size MCCFB100 Fast Fix Ceiling Bracket 100mm PG 1 MCCFB150 Fast Fix Ceiling Bracket 150mm PG 1 MCCFB200 Fast Fix Ceiling Bracket 200mm PG 1 MCCFB300 Fast Fix Ceiling Bracket 300mm PG 1 MCCFB400 Fast Fix Ceiling Bracket 400mm PG 1 MCCFB450 Fast Fix Ceiling Bracket 450mm PG 1 Code No Description Tray Width Finish Pack Size MCSC50 Support Channel 50mm PG 1 MCSC100 Support Channel 100mm PG 1 MCSC150 Support Channel 150mm PG 1 MCSC200 Support Channel 200mm PG 1 MCSC300 Support Channel 300mm PG 1 MCSC400 Support Channel 400mm PG 1 MCSC450 Support Channel 450mm PG 1 MCSC500 Support Channel 500mm PG 1 MCSC600 Support Channel 600mm PG 1 Code No Description Tray Width Finish Pack Size MCCB100 Cantilever Bracket 100mm PG 1 MCCB150 Cantilever Bracket 150mm PG 1 MCCB200 Cantilever Bracket 200mm PG 1 MCCB300 Cantilever Bracket 300mm PG 1 MCCB400 Cantilever Bracket 400mm PG 1 Code No Description Tray Width Finish Pack Size MCWB50 Wall/Floor Bracket 50mm PG 1 MCWB100 Wall/Floor Bracket 100mm PG 1 MCWB150 Wall/Floor Bracket 150mm PG 1 MCWB200 Wall/Floor Bracket 200mm PG 1 MCWB300 Wall/Floor Bracket 300mm PG 1 MCWB400 Wall/Floor Bracket 400mm PG 1 MCWB450 Wall/Floor Bracket 450mm PG 1 MCWB500 Wall/Floor Bracket 500mm PG 1 MCWB600 Wall/Floor Bracket 600mm PG 1 Code No Description Tray Width Finish Pack Size MCHDB320 Heavy Duty Bracket 300mm HDG 1 MCHDB420 Heavy Duty Bracket 400mm HDG 1 MCHDB470 Heavy Duty Bracket 450mm HDG 1 MCHDB520 Heavy Duty Bracket 500mm HDG 1 MCHDB620 Heavy Duty Bracket 600mm HDG 1 Sales sales@marcocableman.co.uk Finishes: Electro-zinc (EZ) Hot-dip galvanised (HDG) Pre-galvanised (PG) 17

18 Tee-junction with radius Wire cable tray fabrication guides The following section is intended to be used as a guide to fabricating wire cable tray fittings on site. Radius tee-junction & crossovers Please note that for crossovers the accessories are doubled Tray Width Fastening Type MCCB MCCA Removed Segments Removed Segments A1 A2 B1 B2 100mm MCCA x mm MCCA MCCB x2 MCSP x50mm x2 x mm MCCA x mm MCCA x mm MCCA x mm MCCA x mm MCCA MCCB x2 MCSP x50mm x2 x MC mm MCCA MCCB x2 MCSP x50mm x2 x All bends can be easily fabricated on site REMOVE SEGMENTS 'A1' REMOVE SEGMENTS 'A2' REMOVE SEGMENTS 'A1' REMOVE SEGMENT 'B1' REMOVE SEGMENT 'B2' MC55200 The photographs above are examples of Radius tee-junctions WIRE CUTTING DIRECTIONS CORRECT INCORRECT Standards Marco wire cable tray conforms to the following standards: BSEN 61537:2002, IEC Sales Hotline: Marco Fax: sales@marcocableman.co.uk Example of MC55200 MCCA x 3 Or MCCB x 2 plus MCSP x 50mm

19 Tray Width Fastening Type MCCB MCSP90 50mm 100mm 150mm 200mm 300mm 400mm 450mm 500mm Tee-junction with right angle & crossovers Please note that for crossovers the accessories are doubled MCCB MCSP90 MCCB MCSP90 MCCB MCSP90 MCCB MCSP90 MCCB MCSP90 MCCB MCSP90 MCCB MCSP90 Removed Segments x4 x2 1 x4 x2 1 x4 x2 2 x4 x2 2 x4 x2 3 x4 x2 4 x4 x2 5 MC5550 The photographs below are examples of Tee-junctions Tee-junction with right angle & Reducers 600mm MCCB MCSP90 x4 x2 6 All bends can be easily fabricated on site MC55100 Example of MC55200: MCCB x 4 MCSP90 x 2 MC55200 Reducers MC MC55100 Typical Fabricated Reducer Components MCCA x2 MCCA x2 Example of MC MC55200 MCCA x 3 Or MCCB x 2 plus MCSP x 50mm MCSP All bends can be easily fabricated on site x1 19

20 Large radius bend Tray Width Fastening Type MCCB MCCA 100mm 150mm MCCB x2 MCSP x 50mm x1 MCCB x2 Large radius bend MCSP x 50mm x1 Removed Segments x3 3 x mm MCCA x2 MCCB x2 MCSP x 50mm x1 x2 x2 4 MC mm 400mm 450mm MCCA x4 MCCB x2 MCSP x 50mm x1 MCCA x6 MCCB x2 MCSP x 50mm x1 x2 x4 6 x2 x mm MCCA x9 x mm MCCA x11 x11 11 All bends can be easily fabricated on site MC55200 Alternate sections to be removed MC55600 Example of MC55200 MCCA x 2 MCCB x 2 MCSP x 50mm x 1 [to be cut to size on site] These photographs are examples of Large redius bends Tray Width Fastening Type MCCB MCSP Removed Segments 50mm MCCB x4 x4 1 2 All bends can be easily fabricated on site MC5550 Large radius bend for 50mm Wire cable tray 20 Sales sales@marcocableman.co.uk Standards Marco wire cable tray conforms to the following standards: BSEN 61537:2002, IEC 61537

21 Tray Width Fastening Type Small radius bend MCNW620 MCCL x2 MCCA Removed Segments A Removed Segments B 50mm MCCA x The photographs below are examples of Small radius bends Small radius bend 100mm MCCA x mm MCCL x2 MCM620NW x1 x mm MCCL x2 MCM620NW x1 x mm MCCL x2 MCM620NW x1 x1 2 4 MC mm MCCL x2 MCM620NW x1 x mm MCCL x2 MCM620NW x1 x mm MCCL x2 MCM620NW x1 x mm MCCL x2 MCM620NW x1 x1 2 6 All bends can be easily fabricated on site MC55150 Example of MC55200 MCCL x 2 MCM620NW x 1 MC55450 WIRE CUTTING DIRECTIONS CORRECT INCORRECT REMOVE SEGMENTS 'B' REMOVE SEGMENTS 'A' REMOVE SEGMENTS 'B' Sales Hotline: Marco Fax:

22 Right angle bend Right angle bend Tray Width Fastening Type MCCA Removed Segments 100mm MCCA x mm MCCA x mm MCCA x mm MCCA x mm MCCA x mm MCCA x mm MCCA x2 5 MC mm MCCA x2 6 All bends can be easily fabricated on site Example of MC55200 MCCA x 2 REMOVE SEGMENTS MC55200 REMOVE SEGMENTS MC55300 The photographs above are examples of Right angle bends WIRE CUTTING DIRECTIONS CORRECT INCORRECT Standards Marco wire cable tray conforms to the following standards: BSEN 61537:2002, IEC Sales Hotline: Marco Fax: sales@marcocableman.co.uk

23 Marco wire cable tray recommendations WALL SUPPORT BRACKET RECOMMENDATIONS Ref. No. Dimensions Fast Fix Wall Bracket Cantilever Bracket Heavy Duty Bracket Wall / Floor Bracket MCAMP MCB35 MC mm x 50mm MCWFB100 * MCCB100 * ~ MCWB50 ~ 1 MC mm x 100mm MCWFB100 MCCB100 ~ MCWB100 ~ ~ MC mm x 150mm MCWFB150 MCCB150 ~ MCWB150 ~ ~ MC mm x 200mm MCWFB200 MCCB200 ~ MCWB200 ~ ~ MC mm x 300mm MCWFB300 MCCB300 MCHDB320 MCWB300 ~ ~ MC mm x 50mm MCWFB100 * MCCB100 * ~ MCWB MC mm x 100mm MCWFB100 MCCB100 ~ MCWB100 ~ ~ MC mm x 150mm MCWFB150 MCCB150 ~ MCWB150 ~ ~ MC mm x 200mm MCWFB200 MCCB200 ~ MCWB200 ~ ~ MC mm x 300mm MCWFB300 MCCB300 MCHDB320 MCWB300 ~ ~ MC mm x 400mm MCWFB400 MCCB400 MCHDB420 MCWB400 ~ ~ MC mm x 450mm MCWFB450 ~ MCHDB470 MCWB450 ~ ~ MC mm x 500mm ~ ~ MCHDB520 MCWB500 ~ ~ MC mm x 600mm ~ ~ MCHDB620 MCWB600 ~ ~ MC mm x 100mm MCWFB100 MCCB100 ~ MCWB100 ~ ~ MC mm x 150mm MCWFB150 MCCB150 ~ MCWB150 ~ ~ MC mm x 200mm MCWFB200 MCCB200 ~ MCWB200 ~ ~ MC mm x 300mm MCWFB300 MCCB300 MCHDB320 MCWB300 ~ ~ MC mm x 400mm MCWFB400 MCCB400 MCHDB420 MCWB400 ~ ~ MC mm x 450mm MCWFB450 ~ MCHDB470 MCWB450 ~ ~ MC mm x 500mm ~ ~ MCHDB520 MCWB500 ~ ~ MC mm x 600mm ~ ~ MCHDB620 MCWB600 ~ ~ Marco wire cable tray SUSPENSION BRACKET RECOMMENDATIONS Ref. No. Dimensions Support Channel Standard / Fast Fix MCSB MCSH MCSB50 MCSB100 MC mm x 50mm MCSC100 * 2 ~ 1 ~ MC mm x 100mm MCSC150 / MCSFC ~ 1 MC mm x 150mm MCSC200 / MCFSC ** ~ ~ MC mm x 200mm MCSC250 / MCFSC ~ ~ MC mm x 300mm MCSC350 / MCFSC350 ~ ~ ~ ~ MC mm x 50mm MCSC100 * 2 ~ 1 ~ MC mm x 100mm MCSC100 / MCSFC ~ 1 MC mm x 150mm MCSC200 / MCFSC ** ~ ~ MC mm x 200mm MCSC250 / MCFSC ~ ~ MC mm x 300mm MCSC350 / MCFSC350 ~ ~ ~ ~ MC mm x 400mm MCSC450 / MCFSC450 ~ ~ ~ ~ MC mm x 450mm MCSC500 / MCFSC500 ~ ~ ~ ~ MC mm x 500mm MCSC550 / MCFSC550 ~ ~ ~ ~ MC mm x 600mm MCSC650 / MCFSC650 ~ ~ ~ ~ MC mm x 100mm MCSC100 / MCSFC ~ ~ MC mm x 150mm MCSC200 / MCFSC ** ~ ~ MC mm x 200mm MCSC250 / MCFSC250 ~ ~ ~ ~ MC mm x 300mm MCSC350 / MCFSC350 ~ ~ ~ ~ MC mm x 400mm MCSC450 / MCFSC450 ~ ~ ~ ~ MC mm x 450mm MCSC500 / MCFSC500 ~ ~ ~ ~ MC mm x 500mm MCSC550 / MCFSC550 ~ ~ ~ ~ MC mm x 600mm MCSC650 / MCFSC650 ~ ~ ~ ~ Suspension & Wall bracket recommendations These tables are intended to be used as a guide only. It is recommended that the tray should be supported at approximately 1 metre intervals. For large volumes of cable, more support may be necessary. Suspension brackets can be used effectively only up to a certain weight. For larger cable tray, support channels are recommended. *Due to a central wire running down the length of the tray a MCTS35 would be needed. **Due to a central wire running down the length of the tray, central suspension brackets would need to be staggered. COUPLER RECOMMENDATIONS Coupler recommendations This table is intended to be used as a guide only. For large volumes of cable, more support may be necessary. Ref No. Dimensions MCQC Quick Coupler MCCA Coupler Side Base Side Base MC mm x 50mm MC mm x 100mm MC mm x 150mm MC mm x 200mm MC mm x 300mm Ref No. Dimensions MCQC Quick Coupler MCCA Coupler Side Base Side Base MC mm x 50mm MC mm x 100mm MC mm x 150mm MC mm x 200mm MC mm x 300mm MC mm x 400mm MC mm x 450mm MC mm x 500mm MC mm x 600mm MC mm x 100mm MC mm x 150mm MC mm x 200mm MC mm x 300mm MC mm x 400mm MC mm x 450mm MC mm x 500mm MC mm x 600mm

24 Cable Management Solutions Marco Cable Management. Unit 8, Bryn Cefni Industrial Park Llangefni, Anglesey. LL77 7XA tel: fax: Marco Cable Management is the trading name of Marco Gearing Limited