LP SERIES MODEL LP35 LOW PROFILE INCREMENTAL OR ABSOLUTE ENCODER
|
|
|
- Silas Weaver
- 5 years ago
- Views:
Transcription
1 LP SERIES MODEL LP35 LOW PROFILE INCREMENTAL OR ABSOLUTE ENCODER Features Low profile package saves space Excellent resistance to shock and vibration 30mm standard through shaft, PEEK reduction hub available High protection level of IP66 High performance in temperatures from 40 C to +100 C Resolutions up to 10,000 PPR, incremental or 16 BITS absolute Terminal box, M or cable output terminations Encapsulated electronics TTL and HTL electronics Reinforced electrical output available on some incremental and absolute models Wiring fault tolerant with terminal box connection Long cable drive capability Mechanical SPECIFICATIONS Housing Size Shaft Size Permissible Shaft Loads Shaft Runout Standard: Ø 90mm X 6mm deep Terminal Box: 8mm tall X 116mm wide X 5mm deep. (See dimensional drawings for detail) Hollow Shaft: Ø 1/ to Ø 1 blind or through Solid Shaft: Ø mm x 0 mm with keyway, Ø 3/8 x 7/8 with flat Hollow Shaft w/ Integrated Coupling: 14mm, 0mm, 1/, 3/4 Axial: 40 N Radial: 80 N Hollow Shaft: 0.1 mm [0.004 ] TIR Solid Shaft: 0.0 mm [0.001 ] TIR Hollow Shaft w/ Integrated Coupling: N/A Static/ Dynamic Torque 30 / 300 mn.m [4./ 4 5 C Bearings Material Bearing Life L 10 h (Theoretical Mechanical Lifetime) Continuous Max. Speed Sealed Cover: Clear anodized aluminum Body: Clear anodized aluminum Shaft: AISI 303 stainless steel > turns / hours 6000 RPM, (Reference Chart 1. Speed vs Temperature) Shaft Moment of Inertia < g.mm [11.9 x 10-3 oz*in*sec ] Weight (approx.) Terminal Box: 790g M or cable: 450g Page 1
2 Chart 1. Speed vs Temperature (Temperature on this chart to be added to ambient temperature. Do not exceede maximum temperature on datasheet.) TEMPERATURE ELEVATION ( C) SPEED (RPM) Cable or M Connection Shaft Options Electrical Through Hollow Shaft Blind Hollow Shaft Shaft with Integrated coupling Solid Shaft Absolute Incremental Output Format SSI compatible (RS4) Two channels in quadrature + index and complements Resolution Up to 16 BITS Up to 10,000 CPT Encoder Accuracy ±0.1 Supply Voltage Vcl Supply Current (No Loads) Current Per Channel Pair Voltage / Output Short Circuit Proof Reverse Polarity Tolerant Wiring Fault Tolerant & Overvoltage Prot. Frequency Response Output Terminations EMC Isolation 5-30 Vdc 75mA Typ 40mA max 8/SI: SSI RS485 w/o parity 8/SR: SSI RS485 reinforced w/o parity Terminal Box version only 8/SI: Yes (except to V+) 8/SR: Yes 8/SI: No 8/SR: Yes Cable or M: 5-30V (8/V) and V (8/5) Terminal Box: 11-30V (8/VR),5-30V (8/V) and V (8/5) Cable or M: 75mA Terminal Box: 100mA (8/VR), 75mA (8/V and 8/5) Cable or M: 40mA Terminal Box: 60mA (8/VR), 40mA (8/V and 8/5) 8/V: Line driver 5-30 V In/Out; PushPull 8/5: Line driver with 5 V (TTL) regulated output 8/VR: Push Pull 11-30V reinforced. Terminal Box version only Cable or M: Yes (8/V) and Yes (except to Vcl) (8/5) Terminal Box: Yes (8/VR), (8/V) and (8/5) except to Vcl Yes Cable or M: No Terminal Box: Yes Up to 60Vdc (8/VR) and No (8/V and 8/5) Cable or M: Up to 1MHz Terminal Box: Up to 300kHz (8/VR), Up to 1MHz (8/V and 8/5) Cable, M or Terminal Box EN : 005, see user manual for details EN : A1 : 011, see user manual for details 1000V Page
3 Environmental Protection Class (sealing) Temperature Range Mechanical Resistance Humidity IP66 Cable or M: -40 C +100 C Terminal Box: -40 C +85 C (8/VR), -40 C +100 C (8/V and 8/5) Shock Vibration 98% RH without condensation (EN ): 3000m.s - (5 ms, half sine) (300 G s) (EN ): 00m.s - ( Hz) (0 G s) OUTPUT WAVEFORMS Waveform AA/ BB/ 00/ Channel B before A Clockwise (US convention is A leads B CCW) Incremental Waveform Absolute SSI Waveform INDEX GATED WITH A & B HIGH (CODE Q8) Z 90 A B CW Rotation Viewing Shaft INDEX GATED WITH B LOW (CODE Q9) Z 180 A B CW Rotation Viewing Shaft DIMENSIONS (A) All dimensions are in millimeters [inches] Through hollow shaft R xM NOTE: CHc : Hexagonal Socket head cap screws 5.5. HC : Hexagonal socket set screws H B.C Page 3
![4 3xM5 4.16 14.55 5.5. to 30 H7 [0.500 to 1.5 H7].394 + +.](/docs-images/85/91679155/images/4-1.jpg "006.00 10 + + 0.15 0.05 0 78 B.C. 3.")
![39 10 to 0 H7 [0.500 to 0.750 H7] 10 + + 0.15.394 + +.006.](/docs-images/85/91679155/images/4-3.jpg "00 0.05 0 78 B.C. 3.07 0 Solid shaft 6 1.0 41 1.61 43.5 1.")
4 Blind hollow shaft R xM to 30 H7 [0.500 to 1.5 H7] B.C Shaft with integrated coupling Mx R to 0 H7 [0.500 to H7] B.C Solid shaft M5x at center R B.C /8 in. shaft with flat Page 4
![36.47 76.99 45.36 - -.0004.004 0.79 ( 5 to 13) [0.0 to 0.51] cable size (not supplied) 8 5.04 30 H7 1.](/docs-images/85/91679155/images/5-1.jpg "181 70.76 90 3.")
5 TERMINAL BOX SHAFT OPTIONS Through Hollow Shaft Blind Hollow Shaft Shaft with Integrated coupling Solid Shaft Through hollow shaft ( 5 to 13) [0.0 to 0.51] cable size (not supplied) H NOTE: CHc : Hexagonal Socket head cap screws HC : Hexagonal socket set screws Page 5
![79 ( 5 to 13) [0.0 to 0.51] cable size (not included) 8 5.04.](/docs-images/85/91679155/images/6-1.jpg "47 1.1.83 to 30 H7 0.500 to 1.5 H7 70.76 90 3.")
![0 to 0.51] cable size (not supplied) 8 5.04 10 to 0 H7 [0.](/docs-images/85/91679155/images/6-3.jpg "50 to 0.75 H7) = 70 =.76 8.31 90 3.54 X M6 5.5.1 6.")
6 Blind hollow shaft ( 5 to 13) [0.0 to 0.51] cable size (not included) to 30 H to 1.5 H Shaft with integrated coupling to 13 [0.0 to 0.51] cable size (not supplied) to 0 H7 [0.50 to 0.75 H7) = 70 = X M M6 Mounting Bolt Detail Page 6
![000 - - 0.006 0.04.47 - -.000.0009.36 - -.0004.004 5 to 13 [0.0 to 0.51] cable size (not supplied) 8 5.04 19.1.75 9.517 9.507.3747.3743 = 70 =.756 90 3.543.4.88 8.6.34 44,5 1,75 18.3 / 8.](/docs-images/85/91679155/images/7-1.jpg "3 0,7 / 1.11 3/8 in. Shaft with Flat 1/4\"-0 with hex nuts 55,17 44,5 1,75 50 1,97 1/4\"-0 x \" with hex nuts T- Long tether arm with ¼ -0 adj.")
7 Solid shaft TETHER OPTIONS FOR STANDARD CABLE OR M CONNECTOR Other options available, consult factory. Tethers come with all the hardware shown , , ,10 76, ,0 5 0,98 6 1,0 6 1, Typ 7,4,85 77,4 3,05 90, 3,55 30 Typ 18.3 / 8.3 0,7 / , to 13 [0.0 to 0.51] cable size (not supplied) = 70 = ,5 1, / 8.3 0,7 / /8 in. Shaft with Flat 1/4"-0 with hex nuts 55,17 44,5 1, ,97 1/4"-0 x " with hex nuts T- Long tether arm with ¼ -0 adj. hardware M9445/053-0 T3-Short tether arm with ¼ -0 adj, hardware (fits 56C) M9445/058-0 Page 7
8 TETHER OPTIONS FOR TERMINAL BOX OUTPUT 85 3,35 0 0,79 3 min. 0, min. min. min. 50,8,00 4,5 0,96 0,08 0,87,5 0,10 1/4"-0 with hex nuts 0 0,79 61,40 56C Face radius 74.6,81 8 3,3 61,40 56C Face radius 74.6,81 8 3,3 T4- Standard Fork is provided for all blind or through hollow shaft versions T5- M9445/ Standard Fork + 56C Face Pin Connection Incremental Termination TERMINATIONS Connection Ordering Code Connection Absolute SSI Description - + A B Z A/ B/ Z/ Case Ground M M EUR M - 8 pins Connector Body Cable SG PVC Jacket BLK RED YEL BLU ORN Terminal Box T Terminal box - 9 pins Other cable types available- Consult factory Termination Connection Ordering Code WHT/ YEL WHT/ BLU Description - + Clk+ Clk- Data+ Data- Reset NC WHT/ ORN GRN Case Ground M M EUR M - 8 pins N/A Connector Body Cable SG PVC Jacket BLK RED BLU WHT/ BLU YEL WHT/ YEL ORN N/A GRN Terminal Box T Terminal box - 9 pins STANDARD RESOLUTIONS Incremental Absolute BITS Counts For non-standard and resolutions above PPR, please contact factory Page 8
9 ORDERING OPTIONS - NORTH AMERICAN LP35 MODELS Use this diagram, working from left to right to construct your model number (Example : LP35-S-Q H30S-8/V-SGXXX- T0) Family LP35 LP35: Low Profile 90mm (3.5 ) body size Housing Type S = Standard Output INCREMENTAL ABZC Q8 = Index with A&B High Q9 = Index gated with Neg B ABSOLUTE AB = Natural Binary AG = Gray Code Resolution INCREMENTAL See standard resolution list, ex: 0104 ABSOLUTE See standard resolution list, ex: Mounting XXXXX example H30SM in Metric and H50P if Imperial H:Through Hollow Shaft (Includes collet clamp) 30S = 30mm (Non isolated) Less than 30mm with isolated reduction sleeve H4EP = ½ H5EP = H6EP = ¾ H7EP = H8EP = 1 H8ES = 1 no isolation B: Blind Hollow Shaft (Screws into mating shaft screw provided) Non isolated versions standard. Isolated versions Standard Outputs INCREMENTAL 8/V = Standard line driver 5-30V In / Out / PushPull 8/5 = Standard Line Driver with 5 volt (TTL) regulated output 8/VR = Push Pull 11-30V reinforced (only T version) Note: All versions are short-circuit protected. Reinforced electronics are short circuit and overvoltage protected Output Termination Type BOX T= Terminal Box with cable gland. (1) STANDARD CABLE SGXXX = Cable gland seal with cable length in inches up to 0 in 6 inch increments. PVC jacket and US standard color code. SQPXXX = Polyurethane with EU Color Code (Not UL listed); for length in M use XXM Coupling / Tether Types Special Features <30mm available, consult factory. B30S = 30 mm B5ES = B6ES = ¾ B7ES = B8ES = 1 C: Hollow Shaft with Integrated Coupling (all options insulated) C14P = 14 mm C0P = 0 mm C4EP = ½ C6EP = ¾ S: Shafted (Requires separate coupling) S = mm S3E = ABSOLUTE 8/SI: SSI RS485 w/o parity 8/SR: SSI RS485 reinforced w/o parity Terminal Box version only STEXXX = Silicone with EU color code (Not UL listed); for length in M use XXM CONNECTOR SM : European standard connector with EU color code SG18C18: US- MS310R18-1P on end of 18 cable SGS18C: US- MS31E-10P on end of 18 cable S VERSION T0 = No tether = STD T = Long Tether Kit (56C) T3 = Short Tether Kit BOX VERSION T4 = Standard Fork is provided for all LP35-TB with blind or through hollow shaft T5 = M9445/ Standard Fork + 56C Face hardware Other Tether arms may be ordered separately (Ex: Ball joint Tether M930-04/XXX) consult with factory NOTE: (1) T Code changes the form from approximately 90mm (3.5 ) round to a rectangle that is approximately 8mm (5 ) high by 116mm wide (4.5 ) Page 9
10 AGENCY APPROVALS & CERTIFICATIONS 004 / 108 / CE Proc. Cont. Eq. E These commodities, technology or software if exported from the United States must be in accordance with the Bureau of Industry and Security, Export Administration regulations. Diversion contrary to U.S. Law is prohibited. GENERAL NOTES (A) For detailed installation instructions and recommend screw torques refer to the User s Manual ACCESSORIES The following accessories are included with your LP series encoder and defined by your part number selection. Bore Reduction Sleeve Integrated Coupling Kit (includes flex, hub and set screws) 9418/H0 = 0 mm bore 9418/H8E = 1 in. bore 9418/H7E =7/8 in. bore 9418/H6E = 3/4 in. bore 9418/H5E = 5/8 in. bore 9418/H4E = 1/ in. bore 9418/H3E = /8 in. bore M9410/ = 14 mm M9410/009-0 = 0 mm M9410/009-E3 =1/4 in. M9410/009-E4 = ½ in. M9410/009-E6 = 5/8 in. Short Tether Arm Kit Tether Pin Kit M9455/058 = short tether, 8 x 1 mm rod M9455/ = short tether, 3/8-16 rod M9445/053-0 = short tether, 1/4-0 rod M9445/059 = 10 x 1.5 mm rod and hardware M9445/ = 3/8-16 rod and hardware M9445/059-0 = 1/4-0 rod and hardware Long Tether Arm Kit Key for mm slot M9445/053 = long tether, 8 x 1 mm rod M9445/ = long tether, 3/8-16 rod M9445/053-0 = long tether, 1/4-0 rod 9435/006 = 4X4X mm key Page 10 Sensata Technologies, Inc. ( Sensata ) data sheets are solely intended to assist designers ( Buyers ) who are developing systems that incorporate Sensata products (also referred to herein as components ). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED AS IS. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY, INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF. All products are sold subject to Sensata s terms and conditions of sale supplied at SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 59 Pleasant Street, Attleboro, MA 0703, USA. Copyright 017 Sensata Technologies, Inc. Specification No _Rev.01/05/18 CONTACT US Americas +1 (800) Option 1 sales.beisensors@sensata.com Europe, Middle East & Africa +33 (3) position-info.eu@sensata.com Asia Pacific sales.isasia@list.sensata.com China +86 (1) Japan +81 (45) Korea +8 (31) India +91 (80) Rest of Asia +886 () ext 808
LP SERIES MODEL LP35 LOW PROFILE PROGRAMMABLE ENCODER
LP SERIES MODEL LP35 LOW PROFILE PROGRAMMABLE ENCODER Features Low profile package saves space Excellent resistance to shock and vibration 30mm standard through shaft, PEEK reduction hub available High
MODEL LP35 LP SERIES LOW PROFILE INTRINSIC SAFETY INCREMENTAL ENCODER
MODEL LP35 LP SERIES LOW PROFILE INTRINSIC SAFETY INCREMENTAL ENCODER Features Certified for use in Class I & II, Div. 1 and Zone 0 and 1 hazardous areas Low profile package saves space Excellent resistance
ABSOLUTE MULTI-TURN ENCODER HMT25
ABSOLUTE MULTI-TURN ENCODER HMT25 Introduction The HMT25 geared multi-turn encoder provides absolute position information over multiple turns of the input shaft. It keeps track of the exact position even
MHM5 SERIES ETHERNET/IP ABSOLUTE MULTI -TURN ENCODER
MHM5 SERIES ETHERNET/IP ABSOLUTE MULTI -TURN ENCODER Features Robust and compact design Solid shaft version Ø 10mm standard, with Ø 6mm optional Precision ball bearings with sealing flange High temperature
H40 ABSOLUTE SHOCK-PROOF ENCODER
H40 ABSOLUTE SHOCK-PROOF ENCODER Introduction Built to the same rugged standards as the H40 Incremental Heavy Duty encoder, this unit features an absolute encoder output up to 13 bits of resolution. Designed
Features & Benefits 360, 512, 720, 1000, 1024, 1440, 1800, 2000, 2048, 2880, 3000, 3600, 4000, 4096, 5000, 5120, 6000, 7200, 8000, 8192, 9000, 10000
CP-800/900 Series Size-25 Housed Rotary Optical Encoders Solid or hollow shaft, incremental, sine/cosine, or absolute format Allied Motion s CP800/900 series are size-25 (2.5 in. (63.5mm)) rotary optical
Rotary Measurement Technology Incremental Encoders
-20 to 60 C Temperature Shock/vibration resistant Short-circuit protection Reverse polarity protection High rotational speed Rugged Balanced, stainless-steel clamping rings, special bearing-shaft connection
Rotary Position Technology Incremental Encoders
-40 to 80 C Temperature Shock/vibration resistant Short-circuit protected Reverse polarity protection High rotational speed Rugged Balanced, stainless-steel clamping rings, special bearing-shaft connection
Material: Weight: Bearing Life: Shaft Speed: Starting Torque: Mass Moment of Inertia: Shaft Loads:
Shaft Encoder - Ø 50 mm Shaft: Ø 6 mm to Ø 12 mm Resolution up to 12.500 ppr IP 65 (IP 67 option) Formerly named 2R or 2R-3L Automation / Electrical Specifications Code: Resolution: Supply Voltage: Voltage:
Absolute Encoders - Singleturn
The Sendix 5853 and Sendix 5873 singleturn encoders with SSI or BiSS interface and optical sensor technology can achieve a resolution of max. 7 bits. These encoders are also available with an optional
XXXX e. X d.. X X X a
The Heavy uty incremental encoder type 0H boasts a high degree of ruggedness in a very compact design. Its special construction makes it perfect for all applications in very harsh environments. / RoHS
Absolute Encoders Multiturn
Absolute Encoders Multiturn Functional Safety, optical The absolute multiturn encoders Sendix 5863 SIL and 5883 SIL are perfectly suited for use in safety-related applications up to SIL3 according to DIN
Absolute Encoders - Singleturn
The Sendix 5 and Sendix 7 singleturn encoders with SSI or BiSS-C interface and optical sensor technology can achieve a resolution of max. 7 bits. These encoders are also available with an optional SinCos
Rotary Measurement Technology Absolute Encoders, Multiturn
Mechanical drive Safety-LockTM High rotational speed -40 to 90 C IP Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection
Absolute Encoders Singleturn
The absolute singleturn encoders Sendix 5853 SIL and 5873 SIL are perfectly suited for use in safety-related applications up to SIL3 according to DIN EN ISO 6800-5- or PLe to DIN EN ISO 3849. The extra
XXXX e. X d.. X X X a
The Heavy Duty incremental encoder type 0H boasts a high degree of ruggedness in a very compact design. Its special construction makes it perfect for all applications in very harsh environments. / RoHS
Incremental encoders With blind or through hollow shaft pulses per revolution programmable
Features Size mm Precise optical sensing Output signal level programmable (TTL or HTL) Blind or through hollow shaft, ø8 15 mm Connection axial, radial or tangential Pulses per revolution 1...65536, programmable
IXARC Incremental Encoder UCD-IPT M100-PRD. Interface Programmable Incremental. Configuration Tool UBIFAST Configuration Tool (Version 1.6.
IXARC Incremental Encoder UCD-IPT00-08192-M100-PRD Interface Interface Programmable Incremental Programming Functions PPR (1-16384), Output, Counting Direction Configuration Tool UBIFAST Configuration
QR12. Output. A = Line Driver B = Line Driver ABZ/ Open Collector UVW C = Sin/Cos/ Line Driver UVW D = Sin/Cos/Open Collector UVW
QR12 DESIGN FEATURES Low profile assembled height of 0.99" Bearing design simplifies encoder attachment Resolutions up to 20,000 lines per revolution SIN/COS outputs available up to 1250 LC 4, 6 or 8 pole
Absolute Encoders Multiturn
The Sendix F36 multiturn with the patented Intelligent Scan Technology is an optical multiturn encoder in miniature format, without gears and with 00% insensitivity to magnetic fields. With a size of just
Material: Weight: Shaft Loads:
Absolute Encoder Type SCA36NA-SSI Absolute Encoder - Ø 36 mm Shaft - Ø 6 mm Singleturn or Multiturn SSI Interface Binary or Gray Code Preset of Zero Position Choice of Counting Direction Enclosure Rating
QUANTUM DEVICES,INC. QPhase ISO 9001 DESCRIPTION TYPICAL APPLICATIONS DESIGN FEATURES
QUANTUM DEVICES,INC. Improving the Quality of Life through the Power in Light QPhase DESCRIPTION Quantum Devices, Inc. Model QDH20 provides an improved feedback solution in applications typically using
Encoder - Absolut 2RMHF-SSI
Absolute Encoder: Ø24 mm Hollow Shaft: Ø3 mm to ¼ Inch Singleturn or Multiturn SSI Interface Binary or Gray Code Preset of Zero Position Choice of Counting Direction IP-Rating: IP64 or IP67 Mechanical
JR12 Jam Nut Mount Optical Encoder
Improving the Quality of Life through the Power in Light JR12 Jam Nut Mount Optical Encoder QPhase Design Features: Replaces Size 15 Pancake Resolver Bearing design simplifies encoder attachment Resolutions
Incremental encoders With blind or through hollow shaft pulses per revolution programmable
Features Size ø58 mm Precise optical sensing Output signal level programmable (TTL or HTL) Blind or through hollow shaft, ø8 15 mm Connection axial, radial or tangential Pulses per revolution 1...65536,
Optical Encoders CP-800/900 Series Size-25 Housed Rotary Optical Encoders Solid or, incremental, sine/cosine, or absolute format Allied Motion s CP-80
Cs GROUP SIX LehriAG Avim SEI Ki CO LTD. ^,1 Motion Computer Optical Products, Inc. COPI 800 & 900 ENCODERS - Incremental - Absolute - Sinusoidal Contact Us! 800-433-3434 USA Email info@grp6.com Optical
MODEL LP35 LP SERIES LOW PROFILE EXPLOSION-PROOF / FLAMEPROOF ENCODER
MODEL LP35 LP SERIES LOW PROFILE EXPLOSION-PROOF / FLMEPROOF ENCODER Introduction For the absolute version Serial Synchronous Interface SSI output provides effective synchronisation in a closed-loop control
Rotary Measuring Technology
SSI or parallel interface Highest shock resistance on the market ( 2500 m/s2, 6 ms acc. to DIN IEC 68-2-27) Divisions: up to 16384 (14 bits), singleturn Housing Ø 58 mm IP 66 Various options (e.g. LATCH,
POSIROT. PRAS3EX Magnetic Angle Sensor. Magnetic Angle Sensors (Dust-Ex-proof) Datasheet
Magnetic Angle Sensors (Dust-Ex-proof) Magnetic Angle Sensor Datasheet Copyright ASM GmbH Am Bleichbach 18-24 85452 Moosinning Germany The information presented in this data sheet does not form part of
ENCODER. SSI Multiturn. Series , Key-Features: Content:
ENCOER SSI Multiturn Series 8.5863, 8.5883 Content: Order Code Shaft... Order Code Hollow Shaft...3 Order Code Blind Hollow Shaft...3 Connection...4 Technical rawing...5 Technical ata...8 Key-Features:
Incremental Encoder Model: FOI58
Incremental Encoder Model: FI58 Document no. FI 188 BE Date: 1.01.201 Robust mechanical construction, high vibration and shock resistance 1 to 16,8 pulses/ revolution perating temperature - 0 C to + 85
H38 Absolute Explosion Proof Encoder
H38 Absolute Explosion Proof Encoder 37 This is the same Explosion Proof rated encoder as the H38 Incremental, in an absolute encoder version with output up to 13 bits of resolution. When your application
Oil & Gas / Heavy Industry Type 2REX-A-NA-SSI
Oil & Gas / Heavy Industry Type 2REX-A-NA-SSI EN 60079 Electrical Specifications Encoder Type: Singleturn Resolution: Number of Revolutions: Supply Voltage: Typical Current Consumption: Accuracy: ± 0,35ᴼ
Phone: Fax: Web: -
ue to their sturdy bearing construction in Safety-ock esign, the Sendix 5000 and 500 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up to
4344 SERIES HERMETIC SEALED THERMOSTATS
4344 SERIES HERMETIC SEALED THERMOSTATS Introduction The Klixon 4344 precision thermostat is constructed with a snap-acting bimetal disc, which serves as the actuating element. As the temperature reaches
MODEL S15 Incremental Optical Rotary Encoder
MODEL S15 Incremental Optical Rotary Encoder Up to 200 KHz frequency response all channels Small compact size: 1.51 diameter 1.00 dia. Bolt circle mount Resolutions up to 12,500 cycles / revolution ( 50,000
Universal Radius Mounting Option. Fixed Radius Mounting Option
F e a t u r e s Factory Set for Same Day Dispatch (1 to 65,536 Pulses Per Rev) 100 Degrees Centegrate cabability as standard Opto-ASIC Technology Any bore - up to 15mm bore (Metric) or (Imperial) The 60HA
VOICE COIL ACTUATOR (VCA) DEVELOPER S KIT Complete VCA and Driver Kit for Custom Actuation System
VOICE COIL ACTUATOR (VCA) DEVELOPER S KIT Complete VCA and Driver Kit for Custom Actuation System Product Description The Voice Coil Actuator (VCA) Developer s Kit from BEI Kimco is a completely self-contained
DRS61: Incremental encoders, number of lines and zero pulse width freely programmable DRS60: Incremental Encoders with Zero-Pulse-Teach
NEW DRS: Incremental encoders, number of lines and zero pulse width freely programmable DRS: s with Zero-Pulse-Teach Further highlights of this generation of encoders: Simple zero-pulse-teach by pressing
Incremental encoders Blind hollow shaft or cone shaft pulses per revolution
Features TTL output driver for cable length up to 550 m Very high resistance to shock and vibrations Hybrid bearing for extended service life Shaft insulation up to.8 kv Large terminal box, turn by 80
847H. Description. Features. Specifications
847H Bulletin 847H High Performance Industrial Incremental Encoders provide code disk resolutions of up to 65536 pulses per revolution at a signal frequency response of 820 khz. The 847H can provide 65536
COMPACT 700 SERIES ENCODERS FOR DRIVES
COMPACT 700 SERIES ENCODERS FOR DRIVES Robustness in tight spaces An encoder is mounted at the rear of a motor and therefore affects the motor s overall length. In tight spaces, the build length can be
Incremental encoders Blind or through hollow shaft ø12 mm pulses per revolution
Blind or through hollow shaft ø mm...5 pulses per revolution Features Encoder with blind or through hollow shaft ø mm Optical sensing method Max. 5 pulses per revolution Small profile depth Versatile mounting
A02H Encoder for Vector Motor Application
A02H Encoder for Vector Motor Application NEMA C-Face Accessories Robust Bearing Design Long Life BTR Lip Seals 6000 RPM Continous Duty M12 eurofast Connector www.turck.com The A02H Kübler by TURCK 3.5
L25 Incremental Optical Encoder
L25 Incremental Optical Encoder The L25 is a lighter duty version of the H25. With low starting torque, a 1/4" diameter stainless steel shaft and a drawn aluminum cover. In most intances, the L25 encoder
9960 SERIES HALL EFFECT SENSOR
9960 SERIES HALL EFFET SENSOR Introduction Model 9960 Hall effect rotary position sensors are available in numerous standard configurations with fast, one week delivery. Available configurations include
Incremental encoders Redundant sensing, isolated blind hollow shaft ø mm, cone shaft ø17 mm pulses per revolution
Features Robust, compact housing Two bearings with large distance, one at each end High shaft load up to 450 N Shock resistant up to 250 g Shaft insulation up to 2.8 kv Highest operating speed 10000 rpm
HD25. Industrial Rugged Metal Optical Encoder Page 1 of 6. Description. Mechanical Drawing. Features
Description HD25 Page 1 of 6 The HD25 is a rugged optical incremental shaft encoder designed for heavy-duty industrial applications. The housing, machined from a solid billet aluminum block and finished
RoHS. High shaft load capacity. Shock / vibration resistant
Due to their sturdy bearing construction in Safety Lock Design, the Sendix 5000 and 5020 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up
QR12 (1.22 ) Diameter Optical Encoder
Improving the Quality of Life through the Power in Light QPhase QR12 (1.22 ) Diameter Optical Encoder Design Features: Low profile assembled height of Bearing design simplifies encoder attachment Resolutions
LP12 (1.22 ) Diameter Optical Encoder
Improving the Quality of Life through the Power in Light QPhase LP12 (1.22 ) Diameter Optical Encoder Design Features: Low profile assembled height of 0.816 Bearing design simplifies encoder attachment
Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders up to 14 bit ST / 16 bit MT
Features Encoder multiturn / SSI Optical sensing method Resolution: max. singleturn 14 bit, multiturn 16 bit Clamping or synchro flange Electronic setting of zero point Counting direction input Available
COMPACT 700 SERIES ENCODERS FOR DRIVES
COMPACT 700 SERIES ENCODERS FOR DRIVES Robustness in tight spaces An encoder is mounted at the rear of a motor and therefore affects the motor s overall length. In tight spaces, the build length can be
Absolute encoders - SSI Shaft with clamping or synchro flange Optical multiturn encoders 14 bit ST / 12 bit MT
Features Encoder multiturn / SSI Optical sensing Resolution: singleturn 14 bit, multiturn 12 bit Clamping or synchro flange Electronic setting of zero point Counting direction input Suitable for high positive,
Agilent AEDA-3300 Series Ultra Miniature, High Resolution Incremental Kit Encoders Data Sheet
Description The AEDA-3300 series are high performance, cost effective, three-channel optical incremental encoder modules with integrated bearing stage. By using transmissive encoder technology to sense
NOVOHALL Rotary Sensor non-contacting. Series RSC2800 digital SSI, SPI, Incremental
NOVOHALL Rotary Sensor non-contacting Series RSC2800 digital SSI, SPI, Incremental The RSC 2800 sensor utilizes a contactless magnetic measurement technology to determine the measured angle. Unlike conventional
Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders up to 14 bit ST / 16 bit MT
Features Encoder multiturn / SSI Optical sensing method Resolution: max. singleturn 14 bit, multiturn 16 bit Clamping or synchro flange Electronic setting of zero point Counting direction input Available
SHAFTED ROTARY POSITION SENSORS
J8 / J0 / J0 / J30 Shafted ; Brief / of 2 Joral REF S; I / J LINE ENCODERS Joral manufactures shafted rotary position sensors for the market of controls, power equipment, hydraulics, and off road vehicles.
Optical encoder MEC22 HR
Optical encoder MEC22 HR Description The MEC22 HR is a high resolution optical hollow shaft encoder that can be fixed quickly and easily on different sizes of motor shafts. The encoder provides two square
SilverMax Datasheet. QuickSilver Controls, Inc. NEMA 23 Servomotors.
SilverMax Datasheet NEMA 23 Servomotors QuickSilver Controls, Inc. www.quicksilvercontrols.com SilverMax Datasheet - NEMA 23 Servomotors 23 Frame Sizes: 23-3, 23-5, 23H-1, 23H-3, 23H-5 / Series: E, E3,
Technical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 700 a at 40 C Mission Time (T M ) L 10
Model Number SYNCHRON SERIELLES INTERFACE Features Recessed hollow shaft SSI interface Up to Bit multiturn Free of wear magnetic sampling High resolution and accuracy Additionally push buttons for preset
Encoders. Series 21 Hollow-Shaft Rotary Optical Encoders Digital incremental or sine/cosine and absolute format. Features & Benefits.
Digital incremental or sine/cosine and absolute format Allied Motion s Series 21 are cost effective, hollow shaft optical encoders that are easy to mount and provide high data rate capabilities. These
HEAVY DUTY 800 SERIES ENCODER MODELS 841, 850, 855, 861, 862, 865
HEAVY DUTY 800 SERIES ENCODER MODELS 841, 850, 855, 861, 862, 865 Robustness and reliability Are you looking for the most robust, maintenance-free and cost-effective encoder? Then the 800 series is for
Standard Industrial types RI 36-H
Miniature industry encoder for high number of pulses Short mounting length Easy mounting procedure Applications: motors, machine tools, robots, automated SMD equipment NUMBER OF PULSES 5 / 0 / 0 / 5 /
Rotary Measuring Technology
Our ATEX encoders now also carry approval for Dust Flameproof-enclosure type of construction with approval for Zone 1 and 21 ExII2GEExdIICT6 and ExII2DIP6xT85 C Shaft ø 12 mm One type for every situation:
Multiturn absolute encoder
0102 Model Number SYNCHRON SERIELLES INTERFACE Features Up to 30 Bit multiturn ATEX approval IECEx approval Flameproof enclosure Removable connection cap Galvanically isolated RS 22 interface Description
XCEL DRIVES CO.LTD. Tel: Fax
CEL DRIVES CO.LTD. Optical Shaft Encoders Resolutions from 0001 to 30,000 PPR Tel: 01978 262100 Fax 01978 262101 1 Contents Pages 2, 3, 4 & 5... Price List, Repairs, Expedite Charges Pages 6 & 7... Series
SE22 Mini Encoder Data Sheet 5V TTL power supply optical model
SE22 Mini Encoder Data Sheet 5V TTL power supply optical model 1 Description SE22 is a high performance, low cost, hollow shaft encoder family, very easy for assembly on shaft diameters set ranging from
Standard Sendix 5000 / 5020 (shaft / hollow shaft) Push-Pull / RS422 / Open collector. Robust performance. Many variants
ue to their sturdy bearing construction in Safety-ock esign, the Sendix 5000 and 500 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up to
Heavy Duty Push-pull / RS422 / speed switch. RoHS 2/22. Magnetic field proof. XXXX e
Sendix H00 (shaft) The Sendix encoder H00 is an extremely rugged available in 3 versions: encoder with or without speed switch and double encoder. Thanks to the special HD-Safety-Lock construction it is
Technical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 700 a at 40 C Mission Time (T M ) L 10
Model Number SYNCHRON SERIELLES INTERFACE Features Solid shaft SSI interface Up to Bit multiturn Free of wear magnetic sampling High resolution and accuracy Additionally push buttons for preset function
Express Delivery. Axial. Connection
HIGH RESOLUTION INCREMENTAL SOLID SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 50.000 pulses per turn External diameter 58 mm Shaft from Ø 6 to 12 mm Protection class IP67 according to DIN
Incremental hollow shaft encoder BRIH EcoMag
Incremental hollow shaft encoder BRIH EcoMag features miniaturized hollow shaft encoder with wide pulse range radial cable connection or connector end shaft mounting up to mm general data voltage supply
PWB encoders GmbH Am Goldberg 2 D-99817 Eisenach Germany Phone: +49 3691 72580-0 Fax: +49 3691 72580-29 info@pwb-encoders.com www.pwb-encoders.com 1 of 9 Description The ME22 is a reliable low cost optical
Optical Kit Encoder Page 1 of 5. Description. Features
Description Page 1 of 5 The E5 Series rotary encoder has a molded polycarbonate enclosure with either a 5-pin or 10-pin latching connector. This optical incremental encoder is designed to easily mount
Multiturn absolute encoder
SYNCHRON SERIELLES INTERFACE Multiturn absolute encoder Model Number Features Industrial standard housing Ø58 mm 30 Bit multiturn Data transfer up to 2 MBaud Optically isolated RS 422 interface Recessed
Absolute multi-turn hollow shaft encoder BOMH Dignalizer SSI
features high resolution multi-turn encoder up to - 8 bit single-turn - 8 bit multi-turn interface programmable permanent self-test reference point programmable general data voltage supply 5 VDC (05C)
Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders 18 bit ST / 12 bit MT
Features High resolution encoder multiturn / SSI Optical sensing method Resolution: singleturn 18 bit, multiturn 12 bit Electronic setting of zero point Counting direction input Available with additional
Rotational Absolute Magnetic Kit Encoder Version 33 LP and HP Displacement Sensor
Rotational Absolute Magnetic Kit Encoder Version 33 LP and HP Displacement Sensor DESIGN SUPPORT TOOLS Models Available click logo to get started QUICK REFERENCE DATA Sensor type ROTATIONAL, magnetic technology
Absolute encoders multiturn
The Sendix M6 with Energy Harvesting Technology is an electronic multiturn encoder in miniature format, without gear and without battery. With a size of just 6 x 5 mm it offers a blind hollow shaft of
TECHNICAL DATASHEET Absolute Encoder AC 36 - BiSS / SSI
Overall length: 36 mm For equipment engineering and industry Up to 22 Bit Resolution Singleturn + 12 Bit Multiturn Solid or hollow shaft version available +100 C operating temperature 10,000 rpm (continuous)
ABSOLUTE MAGNETIC ROTARY ENCODER ANALOG
High-resolution absolute encoder based on magnetic technology. Singleturn sensing based on 360 Hall effect technology. Multiturn sensing based on magnetic pulse counter. No batteries used. Main Features
Temposonics. R-Series SSI. Absolute, Non-Contact Position Sensors. Temposonics RP and RH Stroke length mm. Perfect data processing 0.
R-Series Temposonics Absolute, Non-Contact Position Sensors R-Series Temposonics RP and RH 25 7600 mm Perfect data processing 0.5 μm Rugged industrial sensor Linear and absolute measurement LEDs for sensor
Electrical data Units FVS 58, FHS 58. Operating voltage (PELV) [VDC] Current consumption at 24 VDC [ma] 85
![Electrical data Units FVS 58, FHS 58. Operating voltage (PELV) [VDC] Current consumption at 24 VDC [ma] 85](/thumbs/80/82459193.jpg "Electrical data Units FVS 58, FHS 58. Operating voltage (PELV) [VDC] Current consumption at 24 VDC [ma] 85")
Parallel Singleturn bsolute Value Encoder Features 13-bit Singleturn High code change frequency Inputs for: - Selection of counting direction - Buffer memory (LTCH) - Multiplex operation (TRISTTE) Short-circuit
ENCODER. Analog Multiturn Encoder. Serie 8.M3661/M3681. Key-Features:
ENCODER Multiturn Encoder Serie 8.M366/M368 Key-Features: Content: Order Code...2 Technical Data...3 Outputs & Connections...5 Dimensions...6 - Shaft with max. 0 mm diameter - 0...5/0V, 4...20 ma analog
TECHNICAL DATASHEET Absolute Encoder AC 58 - BiSS / SSI
Compact design: 50 mm length for single or multiturn Aids for start up and operation: diagnostic LED, preset key with optical response, status information Use of sine/ cosine signals for fast control task
DGS 60, DGS 65 and DGS 66: Incremental Encoders for rough environmental conditions
, 5 and : s for rough environmental conditions elect your individual encoder - Possible product variants: and mm solid shafts with servo flange or face mount flange, through or blind hollow shafts with
The World of Motion Control
PWB-Ruhlatec Industrieprodukte GmbH Siegburger Str.39a D-53757 Sankt Augustin Germany www.pwb-technologies.com info@pwb-technologies.com ME16 1 of 8 Rev.7.22 / 05.02.2007 Description The ME16 is a reliable
Contents. For your local distributor call: The Responsive People in Motion Control
Contents Page 1... Contents Pages 2 & 3... Series 121 Pages 4 & 5... Series 225 Pages 6 & 7... Series 260 Pages 8 & 9... Series 700 Pages 10 & 11... Series 702 Pages 12 & 13... Series 730 Pages 14 & 15...
ABSOLUTE ROTARY ENCODER MULTI-TURN BIT PARALLEL
Main Features - Compact and heavy-duty industrial model - Interface: Bit-parallel, push pull ΠShort circuit proof - Housing: 58 mm - Shaft: 6 or 10 mm - Resolution: Max. 25 Bit =,554,42 steps over 4,096
Absolute encoders - SSI
with through hollow shaft Features Encoder multiturn / SSI Optical sensing method Resolution: singleturn 14 bit, multiturn 12 bit Compact design Cost-efficient mounting High reliability by self-diagnostics
Magnetic absolute single-turn encoder BMSH MAGRES parallel
Magnetic absolute single-turn encoder BMSH MAGRES parallel features robust single-turn encoder up to 9 bit parallel interface miniature housing zero-point programmable general data voltage supply 5 VDC
Data Sheet MEM 16. Incremental Encoder Magnetic
Incremental Encoder Magnetic PWB encoders GmbH Am Goldberg 2 D-99817 Eisenach Germany Phone: +49 3691 72580-0 Fax: +49 3691 72580-29 info@pwb-encoders.com MEM16IE Rev.2.1 / 15.12.2016 info@pwb-encoders.com
DATASHEET ABSOLUTE MAGNETIC ROTARY ENCODER SSI
Robust rotary sensor based on reliable magnetic technology. Stainless steel housing capable to withstand extreme environmental conditions. Ideal suited for outdoor applications. Sturdy ball bearings for
Model 25B-F/S/L Solid Shaft Low Line Incremental Optical Rotary Encoder
Model 25B-F/S/L Solid Shaft Low Line Incremental Optical Rotary Encoder DRC Encoder Up to 1250 line count disc Chrome on glass disc +/- 45 arc sec accuracy Optional internal 2X, 5X, or 10X cycle interpolation
EC35. Optical Commutation Kit Encoder Page 1 of 7. Description. Mechanical Drawing. Features
Page 1 of 7 Description The EC35 quick assembly optical commutation encoder is designed for high volume, low cost, OEM motion control applications. The EC35 provides A/B/Z incremental outputs and U/V/W
Data Sheet MEM 22. Incremental Encoder Magnetic
Incremental Encoder Magnetic PWB encoders GmbH Am Goldberg 2 D-99817 Eisenach Germany Phone: +49 3691 72580-0 Fax: +49 3691 72580-29 info@pwb-encoders.com MEM 22 IE Rev.1.9 / 16.05.2017 info@pwb-encoders.com
Encoder WDGI 58E.
Encoder WDGI E www.wachendorffautomation.com/wdgie Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions
Resolution 0.03 % ( ); 0.1 % ( ) Repeatability ±0.03 % ( ); ±0.1 % ( )
PRAS1 Magnetic Angle Sensor with Analog Output Magnetic angle 0-360 in M12 housing Measurement range 0 to 360 Protection class IP67 / IP69K Analog output Stainless steel housing Non-contact with external
Incremental Encoder for special applications
Model Number Features Up to 50,000 ppr Extended temperature range Industrial standard housing Ø58 mm Servo or clamping flange 10 V... 30 V with short-circuit proof push-pull output Description High performance