ERP Test Report for Energy Efficiency of External Power Supplies

Transcription

1 ER Test Report for Energy Efficiency of External ower Supplies Report Reference No... : 14CA Date of issue... : FEB 21, 2014 Testing laboratory...: ATT roduct Service Co., Ltd. Address... : 2F., B2/B3 Area, City laza, Chang An Town, Dong Guan City, Guang Dong,.R. China. Testing location... : As above. Applicant...: Shenzhen TOOW Electronics CO.,LTD. Address.: No.5 & No.6 Building, No.8 Xinxing Industrial ark, Xinhe Village, Fuyong Street, Baoan Dist, Shenzhen. Standard... : This Test program is based on the following standards: EC Regulation 278/2009: EN62301:2005 in excerpt (Test Method for Calculating the Energy Efficiency of Single-Voltage External Ac-Dc ower Supplier: 13, Feb.2004) Samples Received Date...: FEB 12, 2014 Tested Date... : FEB 17, 2014 Description of Sample(s): Type of test object... : Switching Adapter Model and/or type reference...: TA EU(F),TA EU(F) TA UK(F),TA UK(F) TA EU(V),TA EU(V) TA UK(V),TA UK(V) Rating(s)... : Input: V~50/60Hz 0.5A MAX Output: 5V 1A for TA EU(F),TA UK(F) TA EU(V),TA UK(V) 5V 1.2A for TA EU(F),TA UK(F) TA EU(V),TA UK(V) Trademark...: Country of origin... : CHINA Manufacturer(s): : Shenzhen TOOW Electronics CO.,LTD. Address: : No.5 & No.6 Building, No.8 Xinxing Industrial ark, Xinhe Village, Fuyong Street, Baoan Dist, Shenzhen. Integral Input power Switch : Not present Output Cord Length (cm)...: 150 Number of page(s) (Report)... : 8 Number of page(s) (Attachment)... : hotos 3 page Compiled by : Lisa Yan (+ signature) (+ signature) Approved by : Joe Long

2 Report No.: 14CA of 8 Summary of testing: The product meets the Stage 1 & 2 requirement of the implementation measure EC 278/2009, Annex I. Copy of marking plates: Instruments list: Equipment Name Manufacturer Model No. Serial No. Calibration Next Date Calibration Date Electronic Load ARRAY 3711A A06BF Tapeline TAJIMA Hilock-19 ATT-Y Humidity Meter CEREI -- SX050725A ower Analyzers VOLTECH M100 AX132/ ower arameter Meter YOKOGAWA WT210 12BB

3 Report No.: 14CA of 8 Model list for reference: Model No DC Output Rating Vdc A Output power TA107-xxyyy-zz (a) W MAX TA107-xxyyy-zz (a) W MAX Note: xx represent output power 0.1-6W, x=0-9. yyy represent output voltage Vdc, y=0-9, zz= EU, US, UK, AU, KR, CH, AR, J represent difference plug, a= F or V, F represent fixed plug, V represent detachable plug. Remark: 1. The product of model TA EU(F) is identical to model TA UK(F), TA EU(V), TA UK(V). Model TA EU(F) is identical to model TA UK(F), TA EU(V), TA UK(V), except for the type designation and plug type. The model name with EU(F) for Europe plug type used fixed plug, the model name with EU(V) for Europe plug type used detachable plug, the model name with UK(F) for United Kingdom plug type used fixed plug, the model name with UK(V) for United Kingdom plug type used detachable plu. 2. The model TA EU(F) and TA EU(F) is used as the test sample in this report.

4 Report No.: 14CA of 8 Clause Requirement-Test Measuring result-remark Verdict 0 General Ambient condition met requirement of : Ambient Ambient: temperature (23±5) Airspeed: 0.2m/s Airspeed 0.5m/s (EN62301 cl4.2) ower Source mets requirement of : Frequency 50Hz±1% Frequency: 50Hz THD max 1.364% for TA EU(F) 0.2 THD Value <2% THD max 1.270% ratio of peak value of test voltage to rms of 1.33 for TA EU(F) to 1.49 (EN62301 cl.4.3, 4.4) 0.3 ower Measurement accuracy Measurements of power of 0.5W or greater shall be made with an uncertainty of less than or equal to 2% at the 95% confidence level. Measurements of power of less than 0.5W shall be made with an uncertainly of less than or equal to 0.01W at the 95% confidence level. The power measurement instrument shall have a resolution of : -0.01W or better for power measurements of 10W or less (EN62301 cl.4.5) 0.4 Test Approach used -- Stable mode (EN cl ) -- Average power approach (EN cl ) -- Average energy approach (EN cl ) 0.5 Test circuit - Test circuit acc. To Fig. 1 is used - Other test circuit is used Fig.1 Test Circuit

5 Report No.: 14CA of 8 1. No-load power consumption 1.1 Measured power consumption in no-load condition: Stage 1 limit: 0.50W See attached table 0.11W for TA EU(F) 0.11W for TA EU(F) Stage 2 limit: 0.50W AC-AC external power suppliers except low voltage external power supplies, o 51.0W 0.50W AC-AC external power suppliers except low voltage external power supplies, o>51.0w 0.30W AC-DC external power suppliers except low voltage external power supplies, o 51.0W 0.50W AC-DC external power suppliers except low voltage external power supplies, o>51.0w 0.30W Low voltage external power supplies, o 51.0W 0.11W for TA EU(F) 0.11W for TA EU(F) 2. Average active efficiency 2.1 Measured average active efficiency: Stage 1 limit: 0.500*o For o<1.0w 0.090*In(o) For 1.0W o 51.0W For o>51.0w See attached table >limit for TA EU(F) >limit for TA EU(F)

6 Report No.: 14CA of Stage 2 limit: *o For AC-AC and AC-DC external power suppliers, except low voltage external power supplies, o 1.0W *In(o) For AC-AC and AC-DC external power suppliers, except low voltage external power supplies, 1.0W<o 51.0W For AC-AC and AC-DC external power suppliers, except low voltage external power supplies, o>51.0w *o For lower voltage external power supplies, o 1.0W *In(o) For lower voltage external power supplies, 1.0W<o 51.0W For lower voltage external power supplies, o>51.0w See attached table >limit for TA EU(F) >limit for TA EU(F)

7 Report No.: 14CA of 8 Table: Measured and Calculated Data For Model: TA EU(F) No Load Active ower Values Average ercent of Nameplate Current 0% 25% 50% 75% 100% Output Current (ma) Output Voltage (V) Output ower (W) Ac Input Voltage (V) Ac Input ower (W) Total Harmonic Distortion (THD) 1.349% 1.364% 1.293% 1.316% 1.360% 1.333% True ower Factor (W/VA) AC Input Frequency ower Consumed by UUT (W) Efficiency 69.49% 72.38% 72.12% 71.70% 71.42% Supplementary information: Stage 1 limit: Average active mode efficiency limit 0.090*In(o)+0.500= The no-load condition consumption shall not exceed 0.5W. Stage 2 limit: Average active mode efficiency limit *In(o)+0.561= The no-load condition consumption shall not exceed 0.3W.

8 Report No.: 14CA of 8 For Model: TA EU(F) No Load Active ower Values Average ercent of Nameplate Current 0% 25% 50% 75% 100% Output Current (ma) Output Voltage (V) Output ower (W) Ac Input Voltage (V) Ac Input ower (W) Total Harmonic Distortion (THD) 1.212% 1.234% 1.210% 1.261% 1.270% 1.244% True ower Factor (W/VA) AC Input Frequency ower Consumed by UUT (W) Efficiency 70.48% 72.33% 72.22% 71.48% 71.63% Supplementary information: Stage 1 limit: Average active mode efficiency limit 0.090*In(o)+0.500= The no-load condition consumption shall not exceed 0.5W. Stage 2 limit: Average active mode efficiency limit *In(o)+0.561= The no-load condition consumption shall not exceed 0.3W.

9 Report No.: 14CA of 3 Attachment : hoto documentation 1. For models: TA EU(F), TA EU(F)

10 Report No.: 14CA of 3 2. For models: TA UK(F), TA UK(F)

11 Report No.: 14CA of 3 3. For models: TA EU(V), TA EU(V) 4. For models: TA UK(V), TA UK(V)