Page 2 of 8 Report No.:

Size: px

Start display at page:

Download "Page 2 of 8 Report No.:"

Homer Strickland
6 years ago
Views:

Page 2 of 8 Report No.: 11016970 002 Copy of marking plate: Summary of testing: The maximum operating temperature which specified by manufacturer is +40 C.

3 Page 2 of 8 Report No.: Copy of marking plate: Summary of testing: The maximum operating temperature which specified by manufacturer is +40 C. Highest load for this equipment according to is the operation with continuous data transfer between all devices, the dummy load of 2.5W for each USB port, with full white screen in maximum brightness and contrast for LCD Display and maximum volume for speaker. Particulars: test item vs. test requirements Equipment mobility...: Movable equipment Operating condition...: Continuous operation Mains supply tolerance (%)...: No direct connected to mains. Tested for IT power systems...: No direct connected to mains. IT testing, phase-phase voltage (V)...: Class of equipment...: III Mass of equipment (kg)...: 7.2 Protection against ingress of water...: IPX0 Test case verdicts Test case does not apply to the test object..: Test item does meet the requirement...: P(ass) Test item does not meet the requirement...: F(ail)

4 Page 3 of 8 Report No.: Testing Date of receipt of test item...: Sep. 16, 2009 Date(s) of performance of test...: Sep , 2009 General remarks This report is not valid as a CB Test Report unless appended by an approved CB Testing Laboratory and appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02. The test result presented in this report relate only to the object(s) tested. This report shall not be reproduced, except in full, without the written approval of the Issuing testing laboratory. (see Enclosure #) refers to additional information appended to the report. (see appended table) refers to a table appended to the report. Throughout this report a point is used as the decimal separator. Comments: Summary of compliance with National Differences (for explanation of codes see below): EU Group Differences, EU Special National Conditions, EU A-Deviations, AR, AT, AU, BE, CA, CH, CN, CZ, DE, DK, FI, FR, GB, GR, HU, IL, IN, IT, KE, KR, MY, NL, NO, PL, SE, SG, SI, SK, US. AR=Argentina, AT=Austria, AU=Australia, BE=Belgium, CA=Canada, CH=Switzerland, CN=China, CZ=Czech Republic, DE=Germany, DK=Denmark, FI=Finland, FR=France, GB=United Kingdom, GR=Greece, HU=Hungary, IL=Israel, IN=India, IT=Italy, KE=Kenya, KR=Korea, MY=Malaysia, NL=The Netherlands, NO=Norway, PL=Poland, SE=Sweden, SG=Singapore, SI=Slovenia, SK=Slovakia, US=United States of America. Factory: MSI Computer (Shenzhen) Co Ltd. Longma Information Technology Industrial Park, Tangtou Village, Shiyan Town, Baoan District, Shenzhen, Guangdong , P.R. China Definition of variables: Variable: Range of variable: Content: X 0-9, A-Z or blank For marketing purpose only. History of amendments and modifications: Ref. No , dated Jul. 15, 2009 (original test report) Ref. No , dated Sep. 30, 2009 (modification)

5 Page 4 of 8 Report No.: General product information: Description of change(s): 1. Add additiona model name MS-AAXXXX which is similar to original model except for type designation, input current, main board and source of poly-switch. 2. Add alternative source of DC fan for all models. 3. Add alternative source of power supply for all models. 4. Change the factory For the above described change(s) the following was considered to be necessary: Change Testing Comments 1 - Input test - Limited power source test - Battery reverse test - Heating test - Abnormal test See label on the copy of marking plate and sub-clause for new model information. See appended table for the sources. See other tables for test results. 2 Approved DC fan with higher airflow used. No test considered necessary as there is no safety impact. See appended table for the source. 3 Approved power supply with higher rated output current used. No test considered necessary as there is no safety impact. See appended table for the source. 4 See factory information above.

6 Page 5 of 8 Report No.: IEC / EN Clause Requirement Test Result Remark Verdict Power rating See below. P Rated voltage(s) or voltage range(s) (V)...: See copy of marking plate. (no direct connection to the mains) Symbol for nature of supply, for d.c. only...: DC symbol used. (no direct connection to the mains) Rated frequency or rated frequency range (Hz)..: No direct connection to the AC mains. Rated current (ma or A)...: See copy of marking plate. (no direct connection to the mains) Manufacturer s name or trademark or identification mark...: See copy of marking plate. Type/model or type reference...: See copy of marking plate. Symbol for Class II equipment only...: Class III equipment Other symbols...: Other symbols do not give rise to misunderstanding. Certification marks...: See copy of the marking plate for the safety marks. P P P

7 Page 6 of 8 Report No.: TABLE: list of critical components P Object/part no. Manufacturer/ trademark Type/model Technical data Standard Mark(s) of conformity 1. Power Supply Delta Electronics Inc ADP-120ZB BB Rated Input Vac, 2.0 A, Hz. Output: 19Vdc, 6.32 A. 40 C UL , EN/IEC :2001 TÜV, CB, UL LITE-ON PA MS Rated Input Vac, 2.0 A, Hz. Output: 19Vdc, 6.3 A. 40 C UL , EN/IEC :2001 TÜV, CB, UL DC Fan Sunonwealth Electric Machine Industry Co Ltd GB1207PGV1- A(Y) 12 Vdc, max. 0.2 A, min. 8.0 CFM. UL 507, EN/IEC /A11:2004 Poly-switch (FS2, FS3, FS4) (FS2 and FS3 for rear side four USB ports powered pin protection, FS4 rear right side two USB ports powered pin protection.) (For Model MS- AAXXXX) Polytronics Technology Corp. SMD1812P26 0TF PTC type, Rated maximum 8 V dc, (hold current 2.6 A, trip current 5.2 A) UL 1434, EN/IEC , EN/IEC Tyco Electronics Corp minismdc260 F PTC type, Rated maximum 6 V dc, (hold current 2.6 A, trip current 5.2 A) UL 1434, EN/IEC , EN/IEC Bourns Inc. MF-MSMF260 PTC type, Rated maximum 6 V dc, (hold current 2.6 A, trip current 5.2 A) UL 1434, EN/IEC , EN/IEC Poly-switch (F3) (F3 for rear side HDMI port powered pin protection) (For Model MS- AAXXXX) Polytronics Technology Corp. SMD1206P05 0T series PTC type, Rated maximum 15 V dc, (hold current 0.5 A, trip current 1 A) UL 1434, EN/IEC , EN/IEC Note(s): 1. An asterisk indicates a mark that assures the agreed level of surveillance TABLE: electrical data (in normal conditions) P Fuse # Irated (A) U (V) P (W) I (A) Ifuse (A) Condition/status Vdc Maximum normal load

8 Page 7 of 8 Report No.: Note(s): Tested on model MS-AAXXXX 2.5 TABLE: limited power source measurement P Limits Measured Verdict Uoc = 5.07V According to Table 2B (USB 1, Pin 1 to Pin 4, normal condition) current (in A) Pass apparent power (in VA) 5* Uoc = Pass Uoc = 5.07V According to Table 2B (USB 2, Pin 1 to Pin 4, normal condition) current (in A) Pass apparent power (in VA) 5* Uoc = Pass Uoc = 5.07V According to Table 2B (USB 3, Pin 1 to Pin 4, normal condition) current (in A) Pass apparent power (in VA) 5* Uoc = Pass Uoc = 5.07V According to Table 2B (USB 4, Pin 1 to Pin 4, normal condition) current (in A) Pass apparent power (in VA) 5* Uoc = Pass Uoc = 5.05V According to Table 2B (USB 5, Pin 1 to Pin 4, normal condition) current (in A) Pass apparent power (in VA) 5* Uoc = Pass Uoc = 5.05V According to Table 2B (USB 6, Pin 1 to Pin 4, normal condition) current (in A) Pass apparent power (in VA) 5* Uoc = Pass Note(s): TABLE: maximum temperatures P test voltage (V)...: 19Vdc t1 ( C)...: -- t2 ( C)...: -- Maximum temperature T of part/at: T ( C) allowed T max ( C) PCB near U

9 Page 8 of 8 Report No.: PCB near U PCB near U RTC body HDD DVD ROM Enclosure inside near FAN opening Enclosure outside near FAN opening Panel Ambient Temperature T of winding: R 1 (Ω) R 2 (Ω) T ( C) allowed T max ( C) insulation class Note(s): 1. The temperatures were measured under worst normal mode defined in and as described in subclause and at voltages as described above. 2. The user's manual defines the Tma at 40 C. Therefore the maximum permitted temperature are calculated under the worst Tamb at 40 C. 5.3 TABLE: fault condition tests P ambient temperature ( C) : 25, if no other specified. model/type of power supply... : See table manufacturer of power supply... : See table rated markings of power supply... : See table No. Component no. Fault Test voltage (V) Test time Fuse no. Fuse current (A) Result 1. Ventilation openings blocked 19 Vdc 3 hours Unit operation normally, U2 = 78.8 C, no hazards. 2. DC Fan locked 19 Vdc 4 hours Unit operation normally, U2 = C, No hazards. 3. R198 short 19 Vdc Normal reverse Charging Current 0 ma, Abnormal Reverse Current 0 ma 4. D5 (x-y) short 19 Vdc Normal reverse Charging Current 0 ma, Abnormal Reverse Current 3.18 ma Note(s):

TEST REPORT IEC60950_1F. Information technology equipment - Safety - Part 1: General requirements

TEST REPORT IEC60950_1F. Information technology equipment - Safety - Part 1: General requirements Issue Date: 2017-05-23 Page 1 of 9 Report Reference # 4787989179 Test Report issued under the responsibility of: TEST REPORT IEC 60950-1 Information technology equipment - Safety - Part 1: General requirements