INTERACTIVE. data book INDUCTORS AND TRANSFORMERS

Transcription

1 V I S H A Y I N T E R T E C H N O L O G Y, I N C. INTERACTIVE data book INDUCTORS AND TRANSFORMERS vishay AZTRONIC vsd-db Notes:. To navigate: a) Click on the Vishay logo on any datasheet to go to the Contents page for that section. Click on the Vishay logo on any Contents page to go to the main Table of Contents page. b) Click on the products within the Table of Contents to go directly to the datasheet. c) Use the scroll or page up/page down functions. d) Use the Adobe Acrobat page function in the browser bar.. To search the text of the catalog use the Adobe Acrobat search function. One of the World s Largest Manufacturers of Discrete Semiconductors and Passive Components

2 INDUCTORS AND TRANSFORMERS V i s h ay A z tr o ni c w w w. v i s h a y. c o m DATA BOOK V I S H A Y I N T E R T E C H N O L O G Y, I N C.

3 VISHAY INTERTECHNOLOGY, INC. DISCRETE SEMICONDUCTORS PASSIVE COMPONENTS INTEGRATED MODULES STRAIN SENSORS AND TRANSDUCERS RECTIFIERS SMALL-SIGNAL DIODES ZENER & SUPPRESSOR DIODES MOSFETs RF TRANSISTORS OPTOELECTRONICS ICs CAPACITORS RESISTIVE PRODUCTS MAGNETICS DC/DC CONVERTERS STRAIN GAGES AND INSTRUMENTS PHOTOSTRESS INSTRUMENTS Schottky (single, dual) Standard, Fast and Ultra-Fast Recovery (single, dual) Clamper/Damper Bridge Superectifier Sinterglass Avalanche Diodes Schottky and Switching (single, dual) Tuner/Capacitance (single, dual) Bandswitching PIN Zener Diodes (single, dual) TVS (TransZorb, Automotive, ESD, Arrays) Power MOSFETs JFETs Bipolar Transistors (AF and RF) Dual Gate MOSFETs MOSMICs IR Emitters, Detectors and IR Receiver Modules Opto Couplers and Solid State Relays Optical Sensors LEDs and 7 Segment Displays Infrared Data Transceiver Modules Custom products Power ICs Analog Switches Tantalum Capacitors Solid Tantalum Capacitors Wet Tantalum Capacitors Ceramic Capacitors Multilayer Chip Capacitors Disc Capacitors Film Capacitors Power Capacitors Heavy Current Capacitors Aluminum Capacitors Silicon Capacitors Foil Resistors Film Resistors Thin Film Resistors Thick Film Resistors Metal Oxide Film Resistors Carbon Film Resistors Wirewound Resistors Variable Resistors Cermet Variable Resistors Wirewound Variable Resistors Conductive Plastic Variable Resistors Networks/Arrays Non-Linear Resistors NTC Thermistors PTC Thermistors Varistors Inductors Transformers TRANSDUCERS Load Cells Weighing Systems ONE OF THE WORLD S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENTS

4 Inductors and Transformers Vishay S.A. 99, bd de la Madeleine B.P Nice Cedex France Phone: Fax:

5 NOTICE The information in this catalog has been carefully checked for accuracy, and though it is believed to be correct, no warranty, either express or implied, is made as to either its applicability to, or its compatibility with, specific requirements; nor does Vishay Intertechnology, Inc. and its affiliates assume any responsibility for correctness of this information, nor for damages consequent to its use. All such printed materials are not legally binding unless confirmed in writing pursuant to 6 and 80 of the German Code of Civil Law. Warning Regarding Life Support Applications Not all products listed in this catalog are generally recommended for use in life support systems where a failure or malfunction of the component may directly threaten life or cause injury. The user of products in such applications assumes all risks of such use and will agree to hold Vishay Intertechnology, Inc. and all the companies whose products are represented in this catalog, harmless against all damages.

6 Table of Contents INDUCTORS AND TRANSFORMERS Quick Reference Guide... Product Identification... 9 INDUCTORS EC axial conformal coated inductors... EC axial conformal coated inductors... EC6 axial conformal coated inductors... 6 EC6 axial conformal coated inductors... 8 TR0 axial molded inductors... 0 TR0 axial molded inductors... TR0 axial molded inductors... TR0 axial molded inductors... 6 TR06 axial molded inductors... 8 TRB0 axial molded shielded inductors... 0 TRB0 axial molded shielded inductors... IG70 axial high current inductors... IG0 axial high current inductors... 6 CH70 radial high current inductors... 8 CH90 radial high current inductors... 0 CH0 radial high current inductors... SK toroidal filter inductors... SK toroidal filter inductors... SK toroidal filter inductors... 6 SK0 toroidal filter inductors... 7 SK0 toroidal filter inductors... 8 SC0 toroidal common mode inductors... 9 SC0 toroidal common mode inductors... SC0 toroidal common mode inductors... SC06 toroidal common mode inductors... DATA AND VOICE ACCESS TRANSFORMERS TLB wide band transformers... TIM 0, 0, 0 pulse transformers... TIR6 pulse transformers... 6 TCV signal or DC/DC microconverter - SMD transformers/inductors... 7 TCV signal or DC/DC microconverter - SMD transformers/inductors... 8 TCV signal or flyback microconverter - SMD transformers/inductors... 9 TCVU signal or flyback microconverter - SMD transformers TU09 U interface transformers... 6 TLP 600, 00, line matching transformers... 6 TA impedance transformers... 6 Revision 0-Sep-0

7 Table of Contents INDUCTORS AND TRANSFORMERS (CONTINUED) TA impedance transformers... 6 TAM impedance transformers... 6 TA90 impedance transformers CURRENT TRANSFORMERS TCM current micro transformers TCP7 current micro transformers TCB low frequency current transformers... 7 TCH high frequency current transformers... 7 POWER SUPPLY TRANSFORMERS TAZ toroidal transformers... 7 TMS safety transformers TRC 00, 00 low profile transformers TRH low profile transformers Revision 0-Sep-0

8 Inductors and Transformers Quick Reference Guide INDUCTORS CONFORMAL COATED INDUCTORS, AXIAL LEADS AND STYLES DOCU MENT NO. L µh TOL. ± % I ma DCR Ω Q MIN SRF MIN. MHz DIMENSIONS mm Ø L EC EC EC EC Application: commercial MOLDED INDUCTORS, AXIAL LEADS TR TR TR0 TR TR Application: fi lters, tuners MOLDED SHIELDED INDUCTORS, AXIAL LEADS TRB TRB Application: fi lters, tuners PROTECTED CURRENT CHOKES, AXIAL LEADS IG70 IG Application: high current fi lters, power supplies CONFORMAL COATED INDUCTORS, AXIAL LEADS CH CH CH Application: high current fi lters, tuners, power supplies Document Number: 900 Revision 6-Sep-0

9 Quick Reference Guide Inductors and Transformers INDUCTORS (CONTD.) TOROIDAL FILTER INDUCTORS AND STYLES DOCU MENT NO. I A L WITH RATED CURRENT µh L WITHOUT LOAD µh DCR mω Dim. SK SK SK SK0 SK , , , ,800..., Consult detailed datasheets Application: fi lters, power supplies TOROIDAL COMMON MODE INDUCTORS AND STYLES SC0 SC0 SC0 SC06 DOCU MENT NO WINDING NUMBER : PER WINDING L mh DCR max. mω Application: symmetrical and assymetrical line fi lters I A 0...., DIMENSIONS H x L x l mm V 0 x 8 x H x 8 x 7 V x x 6 H x x V 0 x 8 x 8 H 8 x 8 x 7 V x x 8 H 0 x x WIDEBAND CHOKES AND STYLES DOCU MENT NO. IMPEDANCE Ω NUMBER OF TURNS DIMENSIONS D x Lmm IWB x 0 IWB x 0 IWB x 0 Application: noise suppression Document Number: 900 Revision 6-Sep-0

10 Inductors and Transformers Quick Reference Guide INDUCTORS (CONTD.) HIGH POWER COMMON MODE INDUCTORS DOCU NOMINAL CURRENT WINDING RESISTANCE DIMENSIONS MENT IMPEDANCE AND A MΩ (mm) MH STYLES NO. SP 70 SP 80 SP 70 SP 80 H DIA x 0.7 x SP 70 single 90 x phase x.7 0 x 0 x x 0.7. three SP 80 phases 90 x x.7 x Application: electrical and electronic high power fi lters DATA AND VOICE ACCESS TRANSFORMERS WIDEBAND TRANSFORMERS AND STYLES DOCU MENT NO. PRIMARY / SECONDARY RATIO FREQUENCY MHz I ma CASE DIMENSIONS (mm) H x L x W TLB / 60 TLB TLB / / pins. lead spacing.6 x x 7.7 TLB 0 / 60 Application: signal transfer in high frequency PULSE TRANSFORMERS AND STYLES DOCU MENT NO. PRIMARY / SECONDARY RATIO FEQUENCY KHZ ET FACTOR V µs IP ma FERRITE DIMENSIONS (mm) H x L x W TIM 0 TIM 0 TIM pins. lead spacing.6 x x 7.7 Application: general use AND STYLES DOCU MENT NO. RATIO IMPEDANCE ET FACTOR V µs IP MA FERRITE DIMENSIONS (mm) H x L x W TIR 6-0 / TIR / RM6 x x TIR-6-0 / 0 0 Document Number: 900 Revision 6-Sep-0

11 Quick Reference Guide Inductors and Transformers DATA AND VOICE ACCESS TRANSFORMERS (CONTD.) SIGNAL OR MICROCONVERTER TRANSFORMERS AND STYLES DOCU MENT NO. STYLE WINDING NUMBER DIELECTRIC STRENGTH V FREQUENCY khz POWER VA DIMENSIONS (mm) H x L x W TCV 90 E 0.. x 8. x 6. TCV TCV ER ER x. x 8. x 7.7 x. TCVU 90 ER 8. x 6. x. Application: switching and fi ltering for microconverter U INTERFACE TRANSFORMER AND STYLES DOCU MENT NO. U INTERFACE TRANSFORMER RATIO DIMENSIONS (mm) H x L x W LB T TU / / 0.8 B Q 6. x 6. x 0 Application: ISDN LINE MATCHING TRANSFORMERS AND STYLES DOCU MENT NO. APPROVAL TRANSMISSION SPEED BAUDS IMPEDANCE DIMENSIONS (mm) H x L x W TLP /600 TLP V bis /00 x x TLP / IMPEDANCE TRANSFORMERS AND STYLES DOCU MENT NO. APPROVAL TRANSMISSION SPEED BAUDS IMPEDANCE DIMENSIONS (mm) H x L x W TA 90 V 00 x 8 x 8 TA TAM V V /600. x 9.6 x 7. TA90 90 V90 Application: modems telecom lines 6000 x 8 x 8 6 Document Number: 900 Revision 6-Sep-0

12 Inductors and Transformers CURRENT TRANSFORMERS MICROTRANSFORMERS Quick Reference Guide AND STYLES DOCU MENT NO. FREQUENCY khz RATIO I A DIELECTRIC STRENGTH VRMS DIMENSIONS (mm) H x L x W TCM to 00 V/A load x x 7.7 TCP to 00 V/A 00 load 0 9 x 9 x 9 Application: current measurement for microconverter LOW FREQUENCY TRANSFORMERS AND STYLES DOCU MENT NO. FREQUENCY HZ RATIO I A DIELECTRIC STRENGTH VRMS DIMENSIONS (mm) H x L x W 0.07 V/A TCB load TCB V/A 907 load x 8 x 8 60 TCB V/A 00 load Application: /60Hz current measurement HIGH FREQUENCY TRANSFORMERS AND STYLES DOCU MENT NO. FREQUENCY khz RATIO I A DIELECTRIC STRENGTH VRMS DIMENSIONS (mm) H x L x W TCH V/A load TCH to V/A load x 7. x 9. TCH 0 0. V/A load 0 Application: high frequency current measurement Document Number: 900 Revision 6-Sep-0 7

13 Quick Reference Guide Inductors and Transformers CURRENT TRANSFORMERS TOROIDAL TRANSFORMERS DOCU SECONDARY AND MENT VOLTAGE FIXATION STYLES NO. TAZ CFM x 0 UNIT WEIGHT 0g DIMENSIONS (mm) Dia. High. 6 TAZ 0 CFM x 0 0g 7 TAZ CFM 6 x 0 70g 8 TAZ 80 x 6 V CFM 6 x 000g 90 TAZ 0 TAZ to x 8 V CFM 6 x CFM 6 x 0g 700g TAZ 00 CFM 8 x 00g 8 TAZ CFM 8 x g 60 TAZ 00 CFM 8 x 70 00g 0 60 TAZ 0 CFM 0 x 60 00g Application: general use Hz - 60Hz TOROIDAL TRANSFORMERS AND STYLES DOCU MENT NO. SECONDARY VOLTAGE FIXATION UNIT WEIGHT DIMENSIONS (mm) L x W x H TMS 0. Case g x. x. TMS Case 70g x. x.8 TMS. 6V Case 80g x. x.8 TMS to Case 96g x. x 6.8 TMS. V Case 0g x. x 9. TMS. Case g 0. x. x 8. TMS Case 9g. x 6.9 x. Application: general use Hz - 60Hz LOW PROFILE TRANSFORMERS AND STYLES DOCU MENT NO. POWER DIMENSIONS (mm) H x L x I TRC 00 W 0 x x TRC W 0 x x 7 TRH W to 0 W See data sheet Application: professional avionic 8 Document Number: 900 Revision 6-Sep-0

14 Product Identification Standard Decade Inductance Values COLOR CODE COLOR SIGNIFICANT FIGURE VALUE MULTIPLIER INDUCTANCE TOLERANCE EC Marking color bands. Black 0 Brown 0 First significant figure Second significant figure Multiplier Red 00 Orange 000 Yellow Green Blue Purple 6 7 EC, EC6, EC6, TR0, TR0, TR0, TR0, TR06, TRB0, TRB0 Marking color bands. Grey 8 White 9 Black ± 0% First significant figure Second significant figure Tolerance Multiplier Silver 0.0 ± 0% Gold 0. ± % STANDARD DECADE INDUCTANCE VALUES E series - Multiples and submultiples Document Number: 908 Revision 9-Mar-0 9

15 0

16 Inductors Axial or Radial Terminations Molded or Conformal Construction Toroidal Filter and Common Mode Styles Model Numbers EC... EC... EC EC TR TR0... TR0... TR TR TRB TRB0... IG70... IG CH CH CH0... SK... SK... SK... 6 SK SK SC SC0... SC0... SC06...

17 EC Conformal Coated Inductors, Axial Leads, Commercial Use Miniature style Uniform epoxy coating for humidity Copper winding on magnetic core structure Tinned copper axial leads. 8 ± max. 8 ± 0. ± 0.0 Ø max. First significant figure Second significant figure Multiplier Inductance Range 0.µH to 0µH Tolerance ± 0% 0.µH < L 0.6µH ± 0% 0.68µH < L 0µH Limiting Voltage VRMS Coating epoxy resin Terminations tinned copper Weight 0.g ENVIRONMENTAL SPECIFICATIONS Operating Temperature + 80 C Temperature Limits - 0 C + 00 C Document Number: 900 Revision -Jul-0

18 Conformal Coated Inductors, Axial Leads, Commercial Use EC EC INDUCTORS - STANDARD VALUES INDUCTANCE VALUE µh TOLERANCE % ± 0% ± 0% ± 0% ± 0% Q MIN TEST FREQUENCY MHz DCR Ω pieces tape in box ammopack 00 pieces tape and reel On request : 000 pieces tape and reel radial style available(consult VISHAY AZTRONIC for dimensions). color band. EC 0.7µH ± 0% B STYLE INDUCTANCE VALUE TOLERANCE R: tape and reel B: tape in box Ammopack E: radial style Document Number: 900 Revision -Jul-0

19 EC Conformal Coated Inductors, Axial Leads, Commercial Use Uniform epoxy coating for humidity Copper winding on magnetic core structure Tinned copper axial leads Ø max. max. max. Ø 0. ± ± 8 ± Inductance Range 0.µH to 000µH Tolerance ± 0% 0.µH < L 0.8µH ± 0% µh < L 000µH Limiting Voltage VRMS Coating epoxy resin Terminations tinned copper Weight 0.g ENVIRONMENTAL SPECIFICATIONS Operating Temperature + 80 C Temperature Limits - 0 C + 00 C Document Number: 900 Revision 6-Jul-0

20 Conformal Coated Inductors, Axial Leads, Commercial Use EC EC INDUCTORS - STANDARD VALUES INDUCTANCE VALUE µh TOLERANCE % ± 0 % ± 0% ± 0% ± 0% Q MIN TEST FREQUENCY MHz DCR Ω SRF MIN. MHz I ma pieces tape in box ammopack 00 pieces tape and reel On request : 000 pieces tape and reel radial style available (consult VISHAY AZTRONIC for dimensions). color band. EC 0.7µH ± 0% B STYLE INDUCTANCE VALUE TOLERANCE R: tape and reel B: tape in box Ammopack E: radial style Document Number: 900 Revision 6-Jul-0

21 EC6 Conformal Coated Inductors, Axial Leads, Commercial Use Uniform epoxy coating for humidity Copper winding on magnetic core structure Tinned copper axial leads max. max. Ø 0. ± 0.0 Ø max. 8 ± 6 8 ± Inductance Range 0.µH to 000µH Tolerance ± 0% 0.µH < L 0.8µH ± 0% µh < L 000µH Limiting Voltage VRMS Coating epoxy resin Terminations tinned copper Weight 0.g ENVIRONMENTAL SPECIFICATIONS Operating Temperature + 80 C Temperature Limits - 0 C + 00 C 6 Document Number: 900 Revision 6-Jul-0

22 Conformal Coated Inductors, Axial Leads, Commercial Use EC6 EC6 INDUCTORS - STANDARD VALUES INDUCTANCE TEST VALUE TOLERANCE Q FREQUENCY % MIN. µh MHz ± 0 % ± 0% ± 0% ± 0% pieces tape in box ammopack 00 pieces tape and reel On request : 000 pieces tape and reel radial style available (consult VISHAY AZTRONIC for dimensions). DCR Ω color band. SRF MIN. MHz I ma EC 6 0.7µH ± 0% B STYLE INDUCTANCE VALUE TOLERANCE R: tape and reel B: tape in box Ammopack E: radial style Document Number: 900 Revision 6-Jul-0 7

23 EC6 Conformal Coated Inductors, Axial Leads, Commercial Use Uniform epoxy coating for humidity Copper winding on magnetic core structure Tinned copper axial leads 0.6 ±0.0 8 ± 6 max. max. 8 ± Ø max. First significant figure Second significant figure Tolerance Multiplier Inductance Range mh to 9mH Tolerance ± 0% Limiting Voltage VRMS Coating epoxy resin Terminations tinned copper Weight g ENVIRONMENTAL SPECIFICATIONS Operating Temperature + 80 C Temperature Limits - 0 C + 00 C 8 Document Number: 9006 Revision 6-Jul-0

24 Conformal Coated Inductors, Axial Leads, Commercial Use EC6 EC6 INDUCTORS - STANDARD VALUES INDUCTANCE VALUE µh KHz TOLERANCE % ± 0% ± 0% Q MIN TEST FREQUENCY MHz DCR Ω pieces tape in box ammopack 00 pieces tape and reel On request : 000 pieces tape and reel radial style available (consult VISHAY AZTRONIC for dimensions). color band. EC 6 mh ± 0% B STYLE INDUCTANCE VALUE TOLERANCE R: tape and reel B: tape in box Ammopack E: radial style Document Number: 9006 Revision 6-Jul-0 9

25 TR0 Molded Inductors, Axial Leads, High Frequency and Noise Suppression Applications The inductors conform to NFC 9- regulation. They have copper winding on magnetic core structure with tinned copper lead terminals. Depending on inductance value core is either phenolic material, iron powder or ferrite. NF C 9- LNZ GAM-T- lists Accurate dimensions Superior moisture protection Flame retardant coating High-Rel version on request min min Inductance Range 0.0µH to 0µH Tolerance ± 0% 0.0µH < L 0µH On Request ± % µh < L 000µH ± % µh < L 000µH Maximum Voltage 0VRMS Power Rating 80mW at + 70 C Coating fl ame retardant molded epoxy Terminals tinned copper Weight 0.g ENVIRONMENTAL SPECIFICATIONS Operating Temperature Range + 70 C Temperature Limits - C + C 0 Document Number: 9007 Revision 6-Jul-0

26 Molded Inductors, Axial Leads, High Frequency and Noise Suppression Applications TR0 TR0 INDUCTORS - STANDARD VALUES INDUCTANCE VALUE µh TOLERANCE % Q MIN. TEST FREQUENCY MHz DCR Ω SRF MIN. MHz I ma 0.0 ± 0% ± 0% , 80 6, 6 60, 600, Standard: tape packaging pieces tape in box Ammopack 000 pieces tape and reel. Standard: Print marked-manufacturer, inductance value, tolerance, or color bands. TR 0 STYLE 6.8µH INDUCTANCE VALUE ± 0% TOLERANCE ± 0% ± % ± % R R: tape and reel B: tape in box Ammopack OPTIONAL COLOR BANDS Document Number: 9007 Revision 6-Jul-0

27 TR0 Molded Inductors, Axial Leads, High Frequency and Noise Suppression Applications These inductors conform to NFC 9- regulation. They have copper winding on magnetic core structure with tinned copper lead terminals. Depending on inductance value core is either phenolic material, iron powder or ferrite. NF C 9- LNZ GAM-T- lists Accurate dimensions Superior moisture protection Flame retardant coating High Reliability version on request min min Inductance Range 0.µH to 000µH Tolerance ± 0% 0.µH < L 000µH On Request ± % µh < L 000µH ± % µh < L 000µH Maximum Voltage 0VRMS Power Rating 80mW at + 70 C Coating fl ame retardant molded epoxy Terminals tinned copper Weight 0.78g ENVIRONMENTAL SPECIFICATIONS Operating Temperature Range + 70 C Temperature Limits - C + C Document Number: 9008 Revision 6-Jul-0

28 Molded Inductors, Axial Leads, High Frequency and Noise Suppression Applications TR0 TR0 INDUCTORS - STANDARD VALUES INDUCTANCE VALUE µh TOLERANCE % Q MIN. TEST FREQUENCY MHz DCR Ω SRF MIN. MHz I ma 0.0 ± 0% ± 0% Standard: tape packaging pieces tape in box Ammopack 0 pieces tape and reel. Standard: Print marked-manufacturer, inductance value, tolerance, or color bands. TR 0 STYLE µh INDUCTANCE VALUE ± 0% TOLERANCE ± 0% ± % ± % R R: tape and reel B: tape in box Ammopack OPTIONAL COLOR BANDS Document Number: 9008 Revision 6-Jul-0

29 TR0 Molded Inductors, Axial Leads, High Frequency and Noise Suppression Applications These inductors conform to NFC 9- regulation. They have copper winding on magnetic core structure with tinned copper lead terminals. Depending on inductance value core is either phenolic material, iron powder or ferrite. NF C 9- LNZ GAM-T- lists Accurate dimensions Superior moisture protection Flame retardant coating High reliability version on request min min Inductance Range 0.µH to 000µH Tolerance ± 0% 0.µH < L 000µH On Request ± % µh < L 000µH ± % µh < L 000µH Maximum Voltage 0VRMS Power Rating 00mW at + 70 C Coating fl ame retardant molded epoxy Terminals tinned copper Weight.g ENVIRONMENTAL SPECIFICATIONS Operating Temperature Range + 70 C Temperature Limits - C + C Document Number: 9009 Revision 6-Jul-0

30 Molded Inductors, Axial Leads, High Frequency and Noise Suppression Applications TR0 TR0 INDUCTORS - STANDARD VALUES INDUCTANCE VALUE µh TOLERANCE % Q MIN. TEST FREQUENCY MHz DCR Ω SRF MIN. MHz I ma ± 0% ± 0% , 6, 7 0, , , Standard: tape packaging pieces tape in box Ammopack 000 pieces tape and reel. Standard: Print marked-manufacturer, inductance value, tolerance, or color bands. TR 0 STYLE µh INDUCTANCE VALUE ± 0% TOLERANCE ± 0% ± % ± % R R: tape and reel B: tape in box Ammopack OPTIONAL COLOR BANDS Document Number: 9009 Revision 6-Jul-0

31 TR0 Molded Inductors, Axial Leads, High Frequency and Noise Suppression Applications These inductors conform to NFC 9- regulation. They have copper winding on magnetic core structure with tinned copper lead terminals. Depending on inductance value core is either phenolic material, iron powder or ferrite. NF C 9- LNZ GAM-T- lists Accurate dimensions Superior moisture protection Flame retardant coating High reliability version on request min min Inductance Range µh to 800µH Tolerance ± 0% µh < L 800µH On Request ± % µh < L 000µH Maximum Voltage 0VRMS Power Rating 0mW at + 70 C Coating fl ame retardant molded epoxy Terminals tinned copper Weight.7g ENVIRONMENTAL SPECIFICATIONS Operating Temperature Range + 70 C Temperature Limits - C + C 6 Document Number: 900 Revision 6-Jul-0

32 Molded Inductors, Axial Leads, High Frequency and Noise Suppression Applications TR0 TR0 INDUCTORS - STANDARD VALUES INDUCTANCE VALUE µh TOLERANCE % Q MIN. TEST FREQUENCY MHz DCR Ω SRF MIN. MHz I ma ± 0% ± 0% , ,, , Standard: tape packaging pieces tape in box Ammopack 0 pieces tape and reel. Standard: Print marked-manufacturer, inductance value, tolerance, or color bands. TR 0 STYLE 0µH INDUCTANCE VALUE ± 0% TOLERANCE ± 0% ± % R R: tape and reel B: tape in box Ammopack OPTIONAL COLOR BANDS Document Number: 900 Revision 6-Jul-0 7

33 TR06 Molded Inductors, Axial Leads These inductors conform to NFC 9- regulation. They have copper winding on magnetic core structure with tinned copper lead terminals. Depending on inductance value core is either phenolic material, iron powder or ferrite. NF C 9- Accurate dimensions Superior moisture protection Flame retardant coating High reliability version on request min min Inductance Range.µH to 000µH Tolerance ± 0% standard On Request ± % µh < L 000µH ± % µh < L 000µH Maximum Voltage 0VRMS Power Rating 7mW at + 70 C Coating fl ame retardant molded epoxy Terminals tinned copper Weight.g ENVIRONMENTAL SPECIFICATIONS Operating Temperature Range + 70 C Temperature Limits - C + C 8 Document Number: 90 Revision 6-Jul-0

34 Molded Inductors, Axial Leads TR06 TR06 INDUCTORS - STANDARD VALUES INDUCTANCE VALUE µh TOLERANCE % Q MIN. TEST FREQUENCY MHz DCR Ω SRF MIN. MHz I ma ± 0% 60 ± 0% , Standard: tape packaging pieces tape in box Ammopack 0 pieces tape and reel. Standard: Print marked-manufacturer, inductance value, tolerance, or color bands. TR 06 STYLE 8µH INDUCTANCE VALUE ± 0% TOLERANCE ± 0% ± % R R: tape and reel B: tape in box Ammopack OPTIONAL COLOR BANDS Document Number: 90 Revision 6-Jul-0 9

35 TRB0 Molded Shielded Inductors, Axial Leads, High Frequency and Noise Suppression Applications These inductors have copper winding on magnetic core structure with tinned copper lead terminals. Depending on inductance value core is either phenolic material, iron powder or ferrite. LNZ GAM-T- Accurate dimensions Magnetic shielded High reliability version on request min min Inductance Range 0.µH to 7µH Tolerance ± 0% standard Maximum Voltage 00VRMS Power Rating 80mW at + 70 C Coating molded epoxy compound Terminals tinned copper Weight 0.g ENVIRONMENTAL SPECIFICATIONS Operating Temperature Range + 70 C Temperature Limits - C + C 0 Document Number: 90 Revision 6-Jul-0

36 Molded Shielded Inductors, Axial Leads, High Frequency and Noise Suppression Applications TRB0 TRB0 INDUCTORS - STANDARD VALUES INDUCTANCE VALUE µh TOLERANCE % Q MIN. TEST FREQUENCY MHz DCR Ω SRF MIN. MHz I ma ± 0% ± 0% ,, Standard: tape packaging pieces tape in box Ammopack 0 pieces tape and reel. Standard: Print marked-manufacturer, inductance value, tolerance, or color bands. TRB 0 STYLE.µH INDUCTANCE VALUE ± 0% TOLERANCE ± 0% ± % R R: tape and reel B: tape in box Ammopack OPTIONAL COLOR BANDS Document Number: 90 Revision 6-Jul-0

37 TRB0 Molded Shielded Inductors, Axial Leads, High Frequency and Noise Suppression Applications LNZ GAM-T- lists These inductors have copper winding on magnetic core structure with tinned copper lead terminals Depending on inductance value core is either phenolic material, iron powder or ferrite Shielding gives a % coupling limitation between two inductors min min Inductance Range 0.µH to 00µH Tolerance ± 0% standard Maximum Voltage 0VRMS Power Rating 00mW at + 70 C Coating molded epoxy compound Terminals tinned copper Weight.g ENVIRONMENTAL SPECIFICATIONS Operating Temperature Range + 70 C Temperature Limits - C + C Document Number: 90 Revision 6-Jul-0

38 Molded Shielded Inductors, Axial Leads, High Frequency and Noise Suppression Applications TRB0 TRB0 INDUCTORS - STANDARD VALUES INDUCTANCE VALUE µh TOLERANCE % ± 0% ± 0% Q MIN TEST FREQUENCY MHz DCR Ω , SRF MIN. MHz,, I ma Standard: tape packaging pieces tape in box Ammopack 0 pieces tape and reel. Standard: Print marked-manufacturer, inductance value, tolerance, or color bands. TRB 0 STYLE 70µH INDUCTANCE VALUE ± 0% TOLERANCE ± 0% B R: tape and reel B: tape in box Ammopack OPTIONAL COLOR BANDS Document Number: 90 Revision 6-Jul-0

39 IG70 Current Chokes, Axial Leads Noise Suppression Applications These Inductors have copper winding on a bobbin with axial lead terminals Protection by polyolefi n fl ame retardant sleeve Cylindrical shape allows use in automatic cabling machines use This inductor series is specially designed for power supply fi ltering max max. 0.8 Inductance Range µh to 8000µH Tolerance ± 0% Maximum Voltage 0VRMS Measuring Conditions U = 00mVRMS Coating thermo sleeve on request UL version Terminals tinned copper Weight g ENVIRONMENTAL SPECIFICATIONS Operating Temperature Range + 70 C Temperature Limits - C + C Document Number: 90 Revision 6-Jul-0

40 Current Chokes, Axial Leads Noise Suppression Applications IG70 IG70 INDUCTORS - STANDARD VALUES INDUCTANCE VALUE µh IDC = TOLERANCE % TEST FREQUENCY DCR Ω I A ± 0% khz ± 0% khz pieces tape and reel. Print marked: manufacturer, series and style, inductance value, date code. IG µH ± 0% R STYLE INDUCTANCE VALUE TOLERANCE R: tape and reel Document Number: 90 Revision 6-Jul-0

41 IG0 Current Chokes, Axial Leads Noise Suppression Applications These Inductors have copper winding on a bobbin with axial lead terminals Protection by polyolefi n, fl ame retardant sleeve Cylindrical shape allows use in automatic cabling machines This inductor series is specially designed for power supply fi ltering 8 + max. 8 + max. 0,8 Inductance Range.9µH to 00000µH Tolerance ± 0% Maximum Voltage 0VRMS Measuring Conditions U = 00mVRMS Coating thermo sleeve on request UL version Terminals tinned copper Weight 8g ENVIRONMENTAL SPECIFICATIONS Operating Temperature Range + 70 C Temperature Limits - C + C 6 Document Number: 90 Revision 6-Jul-0

42 Current Chokes, Axial Leads Noise Suppression Applications IG0 IG0 INDUCTORS - STANDARD VALUES INDUCTANCE VALUE µh IDC = pieces tape and reel. TOLERANCE % ± 0% khz ± 0% khz TEST FREQUENCY DCR Ω I A Print marked: manufacturer, series and style, inductance value, date code IG 0.µH ± 0% R STYLE INDUCTANCE VALUE TOLERANCE R: tape and reel Document Number: 90 Revision 6-Jul-0 7

43 CH70 Inductors, Radial Leads, Commercial Use Use of a ferrite bobbin with radial terminal confi guration allows a high inductance value in a small size CH series inductors are especially designed for power supply fi ltering max max 9 max Ø 0.7 ± Ø 7 max Inductance Range µh to 000µH Tolerance ± 0% Maximum Voltage VRMS Coating thermo sleeve Terminals tinned copper Weight g ENVIRONMENTAL SPECIFICATIONS Operating Temperature Range + 70 C Temperature Limits - 0 C + 00 C 8 Document Number: 906 Revision 6-Jul-0

44 Inductors, Radial Leads, Commercial Use CH70 CH70 INDUCTORS - STANDARD VALUES INDUCTANCE VALUE µh IDC = 0 TOLERANCE % Q MIN. TEST FREQUENCY MHz DCR Ω SRF MIN. MHz I ma ± 0% ± 0% Tape ammopack of 000 pieces Print marked on packaging: inductance value CH 70 9µH ± 0% B STYLE INDUCTANCE VALUE STANDARD TOLERANCE B: tape Ammopack Document Number: 906 Revision 6-Jul-0 9

45 CH90 Inductors, Radial Leads, Commercial Use Use of a ferrite bobbin with radial terminal confi guration allows a high inductance value in a small size CH series inductors are especially designed for power supply fi ltering max max max Ø 0.7 ± Ø 9 max Inductance Range 00µH to 00000µH Tolerance ± 0% Maximum Voltage VRMS Coating thermo sleeve Terminals tinned copper Weight g ENVIRONMENTAL SPECIFICATIONS Operating Temperature Range + 70 C Temperature Limits - 0 C + 00 C 0 Document Number: 907 Revision 6-Jul-0

46 Inductors, Radial Leads, Commercial Use CH90 CH90 INDUCTORS - STANDARD VALUES INDUCTANCE VALUE µh IDC = 0 TOLERANCE % Q MIN. TEST FREQUENCY MHz DCR Ω SRF MIN. MHz I ma ± 0% ± 0% Tape ammopack of 000 pieces Print marked on packaging: inductance value. CH µH ± 0% B STYLE INDUCTANCE VALUE STANDARD TOLERANCE B: tape Ammopack Document Number: 907 Revision 6-Jul-0

47 CH0 Inductors, Radial Leads, Commercial Use Use of a ferrite bobbin with radial terminal confi guration allows a high inductance value in a small size CH series inductors are especially designed for power supply fi ltering max max. max Ø 0.7 ± Ø max Inductance Range µh to 00µH Tolerance ± 0% Maximum Voltage VRMS Coating thermo sleeve Terminals tinned copper Weight g ENVIRONMENTAL SPECIFICATIONS Operating Temperature Range + 70 C Temperature Limits - 0 C + 00 C Document Number: 908 Revision 6-Jul-0

48 Inductors, Radial Leads, Commercial Use CH0 CH0 INDUCTORS - STANDARD VALUES INDUCTANCE VALUE µh IDC = 0 TOLERANCE % Q MIN. TEST FREQUENCY MHz DCR Ω SRF MIN. MHz I ma ± 0% ± 0% Tape ammopack of 000 pieces Print marked on packaging: inductance value CH 0 680µH ± 0% B STYLE INDUCTANCE VALUE STANDARD TOLERANCE B: tape Ammopack Document Number: 908 Revision 6-Jul-0

49 SK High Current Toroidal Inductors, EMI/RFI Noise Suppression, Switching Power Supplies And Output Chokes SK series inductors have a copper winding on a toroid Available with a bare construction or in a case Main uses are power supply, fi ltering or DC/DC converters with frequencies up to 00kHz SK N 6 SK E (0µH to 00µH) 9 SK V 0 SK H Magnetic Circuit toroid Case plastic Terminals wire N and E versions pins: V and H versions ENVIRONMENTAL SPECIFICATIONS Operating Temperature Range - 0 C + C pieces in waffle pack. INDUCTANCE VALUE VERSUS CURRENT L with no load L at nominal current 0 Ød I nominal 7 Ød. Tolerance ± 0% Max. Operating Frequency 00kHz Maximum Voltage VRMS I A L WITH NO LOAD µh L MIN. AT NOMINAL CURRENT µh DCR mω On request: other values or pin configuration. Ø D (WIRE DIAMETER) N AND E VERSIONS mm (V AND H VERSIONS) Print marked: manufacturer, series, model, inductance value, nominal current. SK 0.7 x 0.7 STYLE.. V VERSION 0.7 x µH INDUCTANCE VALUE NO LOAD Document Number: 909 Revision 6-Jul-0

50 SK High Current Toroidal Inductors, EMI/RFI Noise Suppression, Switching Power Supplies And Output Chokes SK series inductors have a copper winding on a toroid Available with a bare construction or in a case Main uses are power supply, filtering or DC/DC converters with frequencies up to 00kHz SK N SK E (0 µh to 00 µh) SKV 0 SK H Ø d Ø d x 0.7 Magnetic Circuit Case Terminals toroid plastic wire N and E versions pins: V and H versions ENVIRONMENTAL SPECIFICATIONS Operating Temperature Range - 0 C + C pieces in waffle pack. INDUCTANCE VALUE VERSUS CURRENT Tolerance ± 0% Max. Operating Frequency 00kHz Maximum Voltage VRMS I A L WITH 0.7 x 0.7 NO LOAD µh L MIN. AT NOMINAL CURRENT µh DCR mω On request: other values or pin configuration. Ø D (WIRE DIAMETER) N AND E VERSIONS mm L with no load L at nominal current 0 I nominal (V AND H VERSIONS) Print marked: manufacturer, series, model, inductance value, nominal current. SK STYLE E VERSION 7µH INDUCTANCE VALUE NO LOAD Document Number: 900 Revision 0-Mar-0

51 SK High Current Toroidal Inductors, EMI/RFI Noise Suppression, Switching Power Supplies And Output Chokes SK series inductors have a copper winding on a toroid Available with a bare construction or in a case Main uses are power supply, fi ltering or DC/DC converters with frequencies up to 00kHz SK N SK E (0µH to 00µH) SK V. SK H Ød Magnetic Circuit toroid Case plastic Terminals wire N, S and E versions pins: V and H versions ENVIRONMENTAL SPECIFICATIONS Operating Temperature Range - 0 C + C pieces in waffle pack. INDUCTANCE VALUE VERSUS CURRENT L with no load L at nominal current Ø d Tolerance ± 0% Max. Operating Frequency 00kHz Maximum Voltage VRMS I A L WITH NO LOAD µh x 0.7 L MIN. AT NOMINAL CURRENT µh DCR mω On request: other values or pin configuration. (V AND H VERSIONS) Print marked: manufacturer, series, model, inductance value, nominal current. SK S Ø D (WIRE DIAMETER) N - S - E VERSIONS mm µH 0.7 x I nominal STYLE VERSION INDUCTANCE VALUE NO LOAD 6 Document Number: 90 Revision -Jul-0

52 SK0 High Current Toroidal Inductors, EMI/RFI Noise Suppression, Switching Power Supplies And Output Chokes SK series inductors have a copper winding on a toroid Available with a bare construction or in a case Main uses are power supply, fi ltering or DC/DC converters with frequencies up to 00kHz SK0 N 0 SK0 E (0µH to 00µH) SK0 V. SK0 H Ø d.. 0. Magnetic Circuit toroid Case plastic Terminals wire N, S and E versions pins: V and H versions ENVIRONMENTAL SPECIFICATIONS Operating Temperature Range - 0 C + C pieces in waffle pack. INDUCTANCE VALUE VERSUS CURRENT Ø d Tolerance ± 0% Max. Operating Frequency 00kHz Maximum Voltage VRMS I A L WITH NO LOAD µh x 0.7 L MIN. AT NOMINAL CURRENT µh DCR mω On request: other values or pin configuration. 0.7 x 0.7 Ø D (WIRE DIAMETER) N - S - E VERSIONS mm L with no load L at nominal current 0 I nominal (V AND H VERSIONS) Print marked: manufacturer, series, model, inductance value, nominal current. SK 0 STYLE V VERSION 7µH INDUCTANCE VALUE NO LOAD Document Number: 90 Revision -Jul-0 7

53 SK0 High Current Toroidal Inductors, EMI/RFI Noise Suppression, Switching Power Supplies And Output Chokes SK0 N SK0 H SK0 V Copper winding on toroid construction Available with a bare construction or in a case Main uses are power supply, fi ltering or DC/DC converters with frequencies up to 00kHz Ød.. Magnetic Circuit Case Terminals toroid plastic wire N and E versions pins: V version ENVIRONMENTAL SPECIFICATIONS Operating Temperature Range - 0 C + C pieces in waffle pack. INDUCTANCE VALUE VERSUS CURRENT L with no load L at nominal current 0 I nominal 0.7 x 0.7 I A L WITH NO LOAD µh L MIN. AT NOMINAL CURRENT µh x 0.7 Tolerance ± 0% Max. Operating Frequency 00kHz Maximum Voltage VRMS DCR MΩ On request: other values or pin configuration. Ø D (WIRE DIAMETER) N VERSION mm (V VERSION) Print marked: manufacturer, series, model, inductance value, nominal current. SK 0 H STYLE VERSION 7µH INDUCTANCE VALUE NO LOAD 8 Document Number: 90 Revision 6-Jul-0

54 Common Mode Inductors, Noise Suppression SC0 VDE 6- Conform to VDE 6-. Copper winding on ferrite toroid in epoxy case Phase opposition winding is an excellent fi lter for assymmetrical (common mode) noise Efficiency can be increased with Y-capacitors and X-capacitors to make an EMC fi lter Vertical mounting, style V or horizontal mounting, style H Main use is switching power supplies SC0 V SC0 H ELECTRICAL DIAGRAM x x 0.7 Toroid ferrite Case plastic ENVIRONMENTAL SPECIFICATIONS Operating Temperature Range - 0 C + C pieces in waffle pack. Print marked: manufacturer, series, model, inductance value, nominal current by winding, nominal operating voltage, diagram windings SC 0 MODEL Nominal Operating Voltage VRMS Limiting Voltage 0VRMS Hz BY WINDING NOMINAL INDUCTANCE DCR CURRENT A mh mω , Other values on request. V VERSION V: vertical H: horizontal 6.8mH INDUCTANCE VALUE Document Number: 90 Revision 6-Jul-0 9

55 SC0 Common Mode Inductors, Noise Suppression Conform to VDE 6- Copper winding on ferrite toroid in epoxy case Phase opposition winding is an excellent filter for assymmetrical (common mode) noise. Efficiency can be increased with Y-capacitors and X-capacitors to make an EMC fi lter. Vertical mounting, style V or horizontal mounting style H Main use is switching power supplies SC0 V SC0 H ELECTRICAL DIAGRAM Toroid ferrite Case plastic ENVIRONMENTAL SPECIFICATIONS Operating Temperature Range - 0 C + C 0.7 x 0.7 pieces in waffle pack. Print marked: manufacturer, series, model, inductance value, nominal current by winding, nominal operating voltage, diagram windings SC 0 MODEL 0.7 x 0.7 Nominal Operating Voltage VRMS Limiting Voltage 0VRMS Hz BY WINDING NOMINAL INDUCTANCE DCR CURRENT A mh mω Other values on request. V VERSION V: vertical H: horizontal mh INDUCTANCE VALUE Document Number: 90 Revision 9-Mar-0

56 Common Mode Inductors, Noise Suppression SC0 Conform to VDE 6- Copper winding on ferrite toroid in epoxy case Phase opposition winding is an excellent fi lter for assymmetrical (common mode) noise. Effi ciency can be increased with Y-capacitors and X-capacitors to make an EMC fi lter. Vertical mounting, style V or horizontal mounting, style H Main use is switching power supplies SC0 V SC0 H ELECTRICAL DIAGRAM x 0.7 Toroid ferrite Case plastic ENVIRONMENTAL SPECIFICATIONS Operating Temperature Range - 0 C + C pieces in waffle pack. Print marked: manufacturer, series, model, inductance value, nominal current by winding, nominal operating voltage, diagram windings SC 0 MODEL 0.7 x 0.7 Nominal Operating Voltage VRMS Limiting Voltage 0VRMS Hz BY WINDING NOMINAL INDUCTANCE DCR CURRENT A mh mω Other values on request. V VERSION V: vertical H: horizontal 7mH INDUCTANCE VALUE Document Number: 906 Revision 9-Mar-0

57 SC06 Common Mode Inductors, Noise Suppression Conform to VDE 6- Copper winding on ferrite toroid in epoxy case Phase opposition winding is an excellent fi lter for assymmetrical (common mode) noise. Effi ciency can be increased with Y-capacitors and X-capacitors to make an EMC fi lter. Vertical mounting, style V or horizontal mounting style H Main use is switching power supplies SC06 V SC06 H ELECTRICAL DIAGRAM Ø0.80 Toroid ferrite Case plastic ENVIRONMENTAL SPECIFICATIONS Operating Temperature Range - 0 C + C pieces in waffle pack. Print marked: manufacturer, series, model, inductance value, nominal current by winding, nominal operating voltage, diagram windings SC 06 MODEL 0.7 x 0.7 Nominal Operating Voltage VRMS Limiting Voltage 0VRMS Hz BY WINDING NOMINAL INDUCTANCE DCR CURRENT A mh mω Other values on request. V VERSION V: vertical H: horizontal 0mH INDUCTANCE VALUE Document Number: 907 Revision 9-Mar-0

58 Data and Voice Access Model Numbers TLB... TIM 0, 0, 0... TIR TCV... 7 TCV... 8 TCV... 9 TCVU TU TLP-600, -00, TA... 6 TA... 6 TAM... 6 TA Transformers Impedance, Wideband or Pulse Transformers Signal/Flyback or DC/DC Microconverters Toroidal Filter and Common Mode Styles

59 TLB Wideband Transformers Magnetic circuit is potted in a DAP case, UL 9 V0 approved, which makes the product suitable for refl ow soldering Can be used from 0kHz to 0MHz with impedance from Ω to 600Ω with a low insertion loss ELECTRICAL DIAGRAM PRIMARY SECONDARY RECOMMENDED SOLDERING PAD Case UL 9 V0 Unit Weight g CLIMATIC SPECIFICATIONS Temperature Range: Shelf - C + 8 C Working - 0 C + 7 C Print marked: series, model, manufacturer, manufacturing date (code), pin. Input Power mw max. Max. Current 00mA Insulation Voltage 00VRMS Frequency Response TLB 0.6 TLB TLB TLB0 Impedance Ratio.. Bandwidth db to to to to 60MHz MHz 90MHz 60MHz BANDWIDTH TLB TLB TLB TLB 0 db db db db 0 khz 00 khz MHz 0 MHz 00 MHz 0 khz 00 khz MHz 0 MHz 00 MHz 0 khz 00 khz MHz 0 MHz 00 MHz 0 khz 00 khz MHz 0 MHz 00 MHz Tape mm width, mm pitch. Reel 0 pieces: external dia: mm height: mm TLB 0 MODEL R R: tape and reel Document Number: 907 Revision 0-Mar-0

60 Pulse Transformers for General Use TIM 0, 0, These micro transformers are designed for pulse transmission for frequencies up to 00kHz They are used for signal synchronization, power supplies and transistor control Available taped and reeled which allows automatic pick and place ELECTRICAL DIAGRAM Primary Secondary RECOMMENDED SOLDERING PAD Case UL 9 V0 Unit Weight g CLIMATIC SPECIFICATIONS Temperature Range Shelf - C + 8 C Working - 0 C + 7 C Tape mm width, mm pitch. Reel 7 pieces: external dia: 0mm height: mm Print marked: series, model, manufacturer, manufacturing date (code), pin. Maximum Frequency 00kHz Insulation Resistance 000VRMS AND MODEL TIM 0 TIM 0 TIM 0 Secondary/Primary Ratio Primary Inductance ± % 0µH 0µH 8.µH Primary Resistance ± 0% Secondary Resistance ± 0% Primary DC Current max. 0mΩ 0mΩ ma 00mΩ 600mΩ ma 60mΩ 600mΩ 00mA Primary Peak Current 00mA 00mA 00mA ET Factor.Vµs.Vµs Vµs TIM 0 MODEL R R: tape and reel Document Number: 90 Revision 6-Jul-0

61 TIR6 Pulse Transformers TIR pulse transformers are general use products They can be used for transistor drive switching power supplies or data line isolation Stick packaging allows automatic insertion CONFIGURATION (TOP VIEW) ELECTRICAL DIAGRAM 6 S. P 6 S Ground.mm pitch Ferrite RM6 6 pins Unit Weight 8g CLIMATIC SPECIFICATIONS Temperature Range Shelf - C + 8 C Operating - 0 C + 7 C pieces in stick. Print marked: manufacturer, series, model, manufacturing date (code), pin. Dielectric Strength 0VRMS TIR6-0 TIR6-0 TIR6-0 Ratio S/ P = S/ P Min. Primary.H 0.H mh Inductance Resistance 70Ω 0Ω 0Ω RP max. Resistance 8Ω 96Ω 9Ω RS = RS Max. Primary 0.mA 0.6mA ma current Max. Peak 7mA 00mA 0mA Current ET Factor 000Vµs 600Vµs 0Vµs TIR6 0 MODEL 6 Document Number: 906 Revision 6-Mar-0

62 Microconverter Transformers/Inductors TCV Adding up one or more secondary to the basic inductor TCV allows build up of fl yback transformers for micro converters with a power of 0.W Tape and reel packaging allows automatic pick and place RECOMMENDED SOLDERING PAD ELECTRICAL DIAGRAM Ferrite E Unit Weight SMD frame Configuration 6 pins.8mm pitch CLIMATIC SPECIFICATIONS Working Temperature Range - 0 C + 80 C 0 pieces per reel. Taped mm width, mm pitch. Print marked: manufacturer, series, value, manufacturing date (code). INDUCTANCE DCR SATURATION* NOMINAL ** µh MAX CURRENT CURRENT ± 0% Ω A A *DC current which create a 0% loss of inductance value. **DC current which will create a maximum temperature rise of 0 C when applied at C ambient. TCV 00µH INDUCTANCE VALUE Document Number: 90 Revision 6-Mar-0 7

63 TCV Microconverter Transformers/Inductors Adding up one or more secondary to the basic inductor TCV allows build up of fl yback transformers for micro converters with a power of 6W Tape and reel packaging allows automatic pick and place RECOMMENDED SOLDERING PAD TYPICAL APPLICATIONS STEP DOWN ELECTRICAL DIAGRAM STEP UP Ferrite ER Case SMD frame Configuration 0 pins mm pitch CLIMATIC SPECIFICATIONS Working Temperature Range - 0 C + 8 C 600 pieces/reel. Taped mm width, 6mm pitch. Print marked: manufacturer, series, value, manufacturing date (code), pin. Insulation Voltage Between Winding 00VRMS Ratio (-6)/(-0) / Quench Frequency Max 00kHz Electrical Values (-6)/(-0) INDUCTANCE RCC SATURATION* NOMINAL ** µh MAX CURRENT CURRENT ± 0% (Ω) (A) (A) TCV 00µH VALUE * DC current which creates a 0% drop of inductance value. ** DC current which will create a maximum temperature rise of 0 C when applied at C ambient. 8 Document Number: 90 Revision 6-Jul-0

64 Microconverter Transformers/Inductors TCV Adding up one or more secondary to the basic inductor TCV allow build up of fl yback transformers for micro converters with a power of W Tape and reel packaging allows automatic pick and place 8. max RECOMMENDED SOLDERING PAD. TYPICAL APPLICATIONS STEP DOWN + 0V + V 6 6. max.7 V in PWM 0 V out 0 STEP UP. max ELECTRICAL DIAGRAM + V + V V in PWM 0 V out 0 Ferrite Case Configuration ER CLIMATIC SPECIFICATIONS SMD frame 0 pins.mm pitch Working Temperature Range - 0 C + 8 C 00 pieces/reel. Taped mm width, 0mm pitch. Print marked: manufacturer, series, value, manufacturing date (code), pin. Insulation Voltage Between Winding 00VRMS Ratio (-6)/(-0) / Quench Frequency Max 00kHz Electrical Values (-6)/(-0) INDUCTANCE RCC SATURATION* NOMINAL ** µh MAX CURRENT CURRENT ± 0% (Ω) (A) (A) TCV 00µH VALUE * DC current which creates a 0% loss of inductance value. ** DC current which will create a maximum temperature rise of 0 C when applied at C ambient. Document Number: 90 Revision 6-Jul-0 9

65 TCVU Microconverter Transformers TCV transformers are designed for W flyback microconverters They are compatible with standard PWM circuits High frequency capability and SMD design offers an excellent power/volume ratio Tape and reel packaging allows automatic pick and place RECOMMENDED SOLDERING PAD TYPICAL APPLICATIONS p p p ELECTRICAL DIAGRAM Ferrite ER Case SMD frame Configuration 0 pins.mm pitch CLIMATIC SPECIFICATIONS Working Temperature Range - 0 C + 8 C 00 pieces/reel. Taped mm width, 0mm pitch. Max. Primary Resistance... (-0//-6) 0.Ω Primary Inductance (-0//-6) µh ± 0% Max. Primary DC Current.8A Primary Peak Current.A Dielectric Strength... (-0/-6)/(9-/8-/7-) 0VDC Quench Max. Frequency 00kHz Max. Power W Max. Leakage Inductance 00nH Parasitic Capacitance P/S pf Print marked: manufacturer, series, application code, manufacturing date (code), pin. TCV U APPLICATION CODE Winding (-9) (-8) (-7) Typical + V +.V + V Output Voltage Max. Current A A 0.A Output Max. Resistance 0.06Ω 0.0Ω 0.0Ω Ratio Versus // Document Number: 90 Revision -Mar-0

66 ISDN Transformers TU09 Ferrite RM style has a compact profile and allows automated production at low cost Transformers TU09 series are used for ISDN transmission wires up to 0km according to BT and BQ regulation CONFIGURATION (TOP VIEW) ELECTRICAL DIAGRAM CI Line Ground 6. pitch Ø Ferrite RM8-8 pins Configuration.mm pitch Unit Weight 0g CLIMATIC SPECIFICATIONS Temperature Limits - 0 C + 8 C IC COMPATIBILITY Siemens reference IECQ PEB 09 AMD reference AMD 09 Inductance (-).mh ± 0% at 0kHz 00mV Input/Output Ratio 8-: 0.8 -: 7-6:0.8 Leakage Inductance < 90µH at 00kHz 00mV DC Current 60mA max Maximum Resistance/Winding 8-:.Ω -:.8Ω 7-6:.Ω Print marked: manufacturer, series, manufacturing date (code), pin. Coupling Capacitance Dielectric Strength 00pF max. at 0kHz 0V Hz TU09 pieces in a sectioned box. Document Number: 90 Revision 0-Sep-0 6

67 TLP-600, -00, - Line Transformers TLP transformers are designed for telecom line matching and isolation or modems V standard They conform to EN 00 regulations max. CONFIGURATION (TOP VIEW) max. 0. max. 0.6 max max. Ground. mm pitch ELECTRICAL DIAGRAM 0 Primary Secondary 6 Ferrite EP pins Configuration.mm pitch Unit Weight 9g CLIMATIC SPECIFICATIONS Temperature Range Shelf - 0 C + 0 C Working - 0 C + 8 C Print marked: manufacturer, series, model, manufacturing date (code), pin. Dielectric Strength 000VRMS TLP-600 TLP-00 TLP- Output/Input Ratio S/P Impedance 600/ /00 600/ Ratio Minimum.H.H.H Primary Inductance Primary 60Ω 60Ω 60Ω Inductance Secondary 60Ω Ω Ω Inductance Leakage 0mH 0mH 0mH Inductance Other values on request pieces in a sectioned box. TLP 600 MODEL 6 Document Number: 908 Revision 6-Jul-0

68 Line Transformers V Characteristic 600/600Ω TA Conform to EN 00 and EN 609 regulations Potted in a case which gives high isolation and low cost Stick packing allows automatic insertion TA ELECTRICAL DIAGRAM Configuration Case Unit Weight.mm pitch UL 9 VO water proof 0g CLIMATIC SPECIFICATIONS Temperature Range pieces in stick. Shelf - 0 C + 70 C Working - 0 C + 60 C Print marked: manufacturer, series, manufacturing date (code), pin. Output/Input Ratio S/P / Primary Inductance at 00Hz.8H Nominal Inductance: Primary 600Ω Secondary 600Ω Winding Resistance - 66Ω -8 66Ω Insertion Loss (at khz). db Reflection Coefficient No load 0. to khz 0 db In the net db Shunt Loss 0kΩ Signal Versus Frequency 0. to.khz - 0. db Signal in Wide Band 0. to 0kHz -. db Power Level db Symmetry 0. to khz > - 80 db Distortion 0 db to khz 0.% Leakage Inductance mh Dielectric Strength 6.kVDC TA Document Number: 90 Revision -Mar-0 6

69 TA Line Transformers V Characteristic 600/600Ω Meets EN 00 and EN 609 specifi cations Can be used for line matching on V model SMD molding give an excellent dielectric strength and allow automatic pick and place TA ELECTRICAL DIAGRAM Configuration Case Unit Weight.mm pitch UL 9 VO water proof 0g CLIMATIC SPECIFICATIONS Temperature Range pieces in stick. Shelf - 0 C + 70 C Working - 0 C + 60 C Print marked: manufacturer, series, manufacturing date (code), pin. Input/Output Ratio S/P / Primary Inductance at khz H Nominal Inductance: Primary 600Ω Secondary 600Ω Winding Resistance - 6Ω -8 6Ω Insertion Loss (khz). db Reflection Coefficient No load 0. to khz 0 db In the net db Shunt Loss 0kΩ Signal Versus Frequency 0. to.khz - 0. db Signal in Wide Band 0. to 0kHz -. db Power Level 0 db Symmetry 0. to khz > - 80 db Distortion 0 db to khz 0.% Leakage Inductance 8mH Dielectric Strength 6.kVDC TA 6 Document Number: 90 Revision -Mar-0

70 Line Transformers V Characteristic 600/600Ω TAM Meets EN 00 and EN 609 specifi cations Can be used for line matching on V model SMD molding give an excellent dielectric strength and allows automatic pick and place TAM ELECTRICAL DIAGRAM. PRIMARY 6 SECONDARY SOLDER PADS Configuration Case Unit Weight.mm pitch UL 9 VO water proof 0g CLIMATIC SPECIFICATIONS Temperature Range pieces tape and reel. Shelf - 0 C + 70 C Working - 0 C + 60 C Print marked: manufacturer, series, manufacturing date (code), pin. Input/Output Ratio S/P / Primary Inductance.8H Nominal Impedance: Primary 600Ω Secondary 600Ω Winding Resistance - Ω -8 Ω Insertion Loss (khz) db Reflection Coefficient 0. to khz db Shunt Loss 70Ω min. Signal Versus Frequency 0. to khz ± 0. db Symmetry 80 db min. Distortion - 8 db max. at 60Hz power level 0dBm Leakage Inductance 6mH max. Dielectric Strength 600VRMS Insulation Resistance 00MΩ at 0VDC TAM Document Number: 90 Revision 6-Jul-0 6

71 TA90 Line Transformers V90 Characteristic 600/600Ω, Modem 6Kbps Conform to EN 00 and EN 609 regulations Potted in a case which gives high isolation and low cost Stick packing allows automatic insertion TA90 ELECTRICAL DIAGRAM Configuration Case Unit Weight. pitch UL 9 VO water proof 0g CLIMATIC SPECIFICATIONS Temperature Range pieces in stick. Shelf - 0 C + 70 C Working - 0 C + 60 C Print marked: manufacturer, series, manufacturing date (code), pin. Input/Output Ratio S/P / Primary Inductance at 00Hz H Nominal Impedance Primary 600Ω Secondary 600Ω Winding Resistance - 00Ω -8 00Ω Insertion Loss (at khz). db typical Reflection Coefficient No load 0. to khz 6 db In the net db Shunt Loss kω typical Signal Versus Frequency from 0. to khz ± 0.6 db Signal in Wide Band from 0.0 to 6kHz - db Power Level 0 db Symmetry 0. to khz > - 80 db Distortion 0 db to khz 0.% Leakage Inductance mh Dielectric Strength 6.kVDC TA90 66 Document Number: 90 Revision -Mar-0

72 Model Numbers TCM...68 TCP TCB...7 TCH...7 Current Transformers Current Micro-Transformers Low Frequency and High Frequency Moldes

73 TCM Current Transformers Current microtransformers are designed for AC measurement up to 00kHz Main application is current measurement or limitation for switching power supply or DC/DC converter Tape and reel packaging allows automatic pick and place ELECTRICAL DIAGRAM 9.0 primary secondary RECOMMENDED SOLDERING PAD Case UL 9 V0 Max. Unit Weight g CLIMATIC SPECIFICATIONS Temperature Range Shelf - C + 8 C Working - 0 C + 7 C Maximum Frequency 00kHz Insulation Voltage 0VRMS mn Maximum Primary Current On Ω Load to Add to the Circuit A RMS Secondary Resistance.Ω ± 0% Secondary Inductance.6µH ± % MEASUREMENT CONDITIONS Ip Primary current Tape mm width, 6mm pitch. 0 pieces/reel: external dia: 0mm height: mm Rs Ω V Shunt voltage Print marked: series, model, manufacturer, manufacturing date (code), pin. 6 SHUNT VOLTAGE VERSUS FREQUENCY SHUNT VOLTAGE (VOLT), 0, CURRENT = A CURRENT =. A CURRENT = A CURRENT = 0. A TCM AND MODEL FREQUENCY (khz) 68 Document Number: 909 Revision 0-Mar-0

74 SMD Current Transformers TCP7 TCP7 transformer is designed for AC current measurement for frequencies from 0kHz to 00kHz with complete isolation of circuits Main applications: DC/DC converter, switching power supplies or any electronic device Tape and reel packaging allows automatic pick and place 9. max. RECOMMENDED SOLDERING PAD ELECTRICAL DIAGRAM 8.9 max. 6. ma max. 6 TYPICAL APPLICATION.9 max. Ip 00 Ω V Tension shunt 6 Ferrite EP7 Case SMD shell Configuration 6 pins Unit Weight g CLIMATIC SPECIFICATIONS Working Temperature Range - 0 C + 8 C Frequency Range 0kHz to 00kHz Dielectric Strength 0VRMS Primary Resistance -6//- max 0MΩ Secondary Resistance - max.ω Maximum Primary Current A On 00Ω load to add to the circuit Primary Peak Current A Document Number: 900 Revision 0-Mar-0 69

75 TCP7 SMD Current Transformers FREQUENCY VERSUS VOLTAGE CURRENT = A SHUNT VOLTAGE (VOLT) SHUNT VOLTAGE (VOLT) CURRENT VERSUS VOLTAGE CURRENT = A CURRENT = A FREQUENCY (khz) 0 khz 00 khz 00 khz CURRENT I (A) pieces tape and reel Print marked: manufacturer, series, manufacturing date (code), pin. TCP7 70 Document Number: 900 Revision 0-Mar-0

76 Low Frequency Current Transformers TCB 8 TCB transformers are designed for AC current measurement for frequencies from Hz to 00Hz Used for measurement or current limitation for electrical appliances powered by main supply /60Hz or low frequency transformers such as motors and heaters Measurement is done using a lead going through the center of the transformer No temperature rise, no disturbance can be noted TYPICAL APPLICATION. Ip min. Rs V Shunt Voltage 0.7 x 0.7. Primary current Case UL 9 V0 Unit Weight g CLIMATIC SPECIFICATIONS Temperature Range: Shelf - C + 8 C Working - 0 C + 7 C 0.7 x 0.7 Print marked: series, model, manufacturer, manufacturing date (code). Arrow showing reference for phase matching with winding -. Frequency Range Hz/00Hz Insulation k VRMS, k VRMS on request TCB TCB 70 TCB 00 Ratio : 0 : 700 : 000 Shunt Resistance to Add to the Circuit RS (Ω) Primary Current max. (A) Ratio Shunt Voltage (V) Primary Current (A) Winding 8. 7 Resistance - (Ω), TCB with shunt Ω TCB 70 with shunt Ω TCB 00 with shunt Ω Hz 00 Hz 6 Hz 6 Hz 00 Hz SHUNT VOLTAGE (VOLT),, SHUNT VOLTAGE (VOLT) SHUNT VOLTAGE (VOLT) 0, CURRENT (A) CURRENT (A) CURRENT (A) pieces in a sectioned box TCB MODEL Document Number: 907 Revision 6-Jul-0 7

77 TCH High Frequency Current Transformers TCH current transformers are designed for AC current measurement for frequencies from 0kHz to 00kHz or current limitation on switching power supplies or DC/DC converters Measurement is done using a lead going through the center of the transformer No temperature rise, no disturbance can be noted TYPICAL APPLICATION Ip x Primary current Rs V Shunt Voltage.7 Case UL 9 V0 Unit Weight 6g CLIMATIC SPECIFICATIONS Temperature Range Shelf - C + 8 C Working - 0 C + 7 C Print marked: manufacturer, series, model, manufacturing date (code). Arrow showing reference for phase matching with - winding. Frequency Range 0kHz/00kHz Insulation k VRMS TCH TCH 0 TCH 0 Ratio : : 00 : 00 Shunt Resistance to Add to the Circuit RS (Ω) Primary Current 0 0 max. (A) Ratio Shunt Voltage (V) Primary Current (A) Winding Resistance - (Ω) TCH with shunt Ω TCH 0 with shunt Ω TCH 0 with shunt Ω 6 0 khz 60 khz 00 khz 0 khz 60 khz 00 khz 0 khz 60 khz 00 khz SUUNT VOLTAGE (VOLT) SHUNT VOLTAGE (VOLT) SHUNT VOLTAGE (VOLT) CURRENT (A) CURRENT (A) CURRENT (A) pieces in a sectioned box TCH 0 MODEL 7 Document Number: 908 Revision -Mar-0

78 Model Numbers TAZ... 7 TMS TRC 00, TRH Power Supply Transformers Toroidal and Safety Transformers Low Profile Models 7

79 TAZ Toroidal Transformers NFC 00 0 sizes with power ratings from to 0 watts TAZ toroidal transformers are designed for /60Hz power supplies used for electronic circuitry Performance and geometry of magnetic core give an excellent effi ciency and very low radiation Parts are delivered with ring washers for easy assembly Dia D DIMENSIONS in mm e E SCREW UNIT WEIGHT Kg Screw TAZ TAZ M x 0 M x TAZ 8 8 M 6 x TAZ M 6 x.0 E e TAZ M 6 x. TAZ M 6 x.7 TAZ M 8 x. TAZ 60 6 M 8 x 70.0 Dia D mm TAZ M 8 x 70. TAZ 0 60 M 0 x 60. Primary Voltage Frequency Range Dielectric strength VRMS parallel windings 0VRMS series windings or 60Hz 0VRMS Assembly screwed and tied by ring washer and soft washers Connection wire with colored sleeves Protection polyester ribbon CLIMATIC SPECIFICATIONS Temperature Range 0 C to + 70 C SPECIAL ON REQUEST Primary/secondary shield Flexible leads Impregnation Connector Specific voltages Specific sizes. 7 Document Number: 906 Revision 6-Jul-0

80 Toroidal Transformers TAZ ELECTRICAL DIAGRAM Brown Green PRIMARY Red Orange 6 Blue 7 Violet SECONDARY Yellow 8 Grey CONNECTION FOR 0V MAIN SUPPLY CONNECTION FOR V MAIN SUPPLY Primary 0VRMS Secondary Primary V eff. Secondary AND MODEL CURRENT (A) POWER W x 6V x 9V x V x V x V x 8V TAZ TAZ TAZ TAZ TAZ TAZ TAZ TAZ TAZ TAZ In a box with screw, ring washer and soft washers. Label with manufacturer, series, model, manufacturing date (code), schematic. TAZ 0W MODEL x 6V SECONDARY VOLTAGE Document Number: 906 Revision 6-Jul-0 7

81 TMS Mains Transformers Potted in a case to be mounted on a PCB Potting gives a high isolation and good aging Pins are on a standard mm pitch TMS 0. / /. /.8 /. TMS. TMS A pins ø pins Ø pins Ø 0.8 ELECTRICAL DIAGRAMS SECONDARY SECONDARYS 7 6 primary secondary primary 7 9 secondary Document Number: 909 Revision 6-Jul-0

82 Mains Transformers TMS Case UL 9 VO compound CLIMATIC Temperature Range Shelf - 0 C + 0 C Working - 0 C + 70 C Dielectric Strength Primary/Secondary Primary Voltage Electrical Protection 00VRMS 0VRMS /60Hz external fuse TECHNICAL SPECIFICATIONS AND MODEL TMS 0. TMS TMS. TMS.8 TMS. TMS. TMS Size EI 0 EI 0 EI 0 EI 0 EI 0 EI 8 EI Power (W) Temporized Fuse (A) Unit Weight (g) High A (mm), V Maximum Permanent Current ( Secondary) 9V V ma V 8V V x 6V Maximum Permanent Current ( Secondaries) x 9V x V ma x V x 8V x V Other voltages on request In box. Print marked: manufacturer, series, model, customer specifi cations, manufacturing date (code). TMS. POWER x V SECONDARY VOLTAGE Document Number: 909 Revision 6-Jul-0 77

83 TRC 00, 00 Low Profile Planar Transformers sizes, watt and 00 watt and below <<PLANAR>> transformers TRC series are designed for switching power supplies and DC/DC converters with a low profi le requirement Transformer thickness gives high shock and vibration performance and excellent heat dissipation Windings are either made from a combination of PC boards, copper straps or thermo adhesive wire which allows high frequency use and optimizes weight in relation to power TRC 00 TRC Mounting PC pins Terminals brass solder coated Unit Weight TRC 00 g TRC 00 70g CLIMATIC SPECIFICATIONS Temperature Range Shelf - C + C Working - 0 C + C Maximum Power Maximum Frequency Dielectric Strength TRC 00 W TRC 00 00W 00kHz 000VRMS Print marked: manufacturer, series, model, customer reference, manufacturing date (code). TRC 00 MODEL CUSTOMER REFERENCE 78 Document Number: 90 Revision -Mar-0

84 Low Profile Transformers TRH PC BOARD PIN OUT <<PLANAR>> transformer TRH series are designed for switching power supplies and DC/DC converters with a low profi le requirement Transformer thickness gives high shock and vibration performance and excellent heat dissipation Windings are either made from a combination of PC boards, copper straps or thermo adhesive wire which allows high frequency use and optimizes weight in relation to power COPPER STRAPS PIN OUT A 7 A B A B B C W E min. E min. MODEL TRH 0 TRH 0 TRH TRH 0 TRH TRH POWER W Dimensions in mm A B E Holding mounting frame Terminals pins or copper strap Print marked: manufacturer, series, model, customer specifications, manufacturing date (code). TRH 8 MODEL CUSTOMER SPECIFICATIONS Document Number: 90 Revision 6-Jul-0 79