Surface Mount Wideband RF
|
|
|
- Diana Walters
- 5 years ago
- Views:
Transcription
1 Document 9- Surface Mount Wideband RF Tapped and untapped versions V interwinding isolation, / Watt RF input power ma max current rating. Typical Frequency Response Part db db db number (MHz) (MHz) (MHz) TTWB--AL_ TTWB-.-AL_ TTWB--AL_ TTWB--AL_ TTWB--AL_ TTWBL_ TTWB-L_ TTWBL_ TTWBL_ TTWB--BL_ TTWB-.-BL_ TTWB--BL_ TTWB--BL_ TTWB--BL_ TTWBL_ TTWB-L_ TTWBL_ TTWB--CL_ TTWB-.-CL_ TTWB--CL_ TTWB--CL_ TTWBL_ TTWB-L_ TTWBL_ TTWBL_ Core material Ferrite Terminations RoHS compliant tin-silver-copper over silver-platinumglass frit. Other terminations available at additional cost. Weight.. g Ambient temperature C to + C Storage temperature Component: C to + C. Packaging: C to + C Resistance to soldering heat Max three second reflows at + C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) (unlimited floor life at < C / % relative humidity) Mean Time Between Failures (MTBF),, hours Packaging per " reel; Plastic tape: mm wide,. mm thick, mm pocket spacing,. mm pocket depth PCB washing Tested to MIL-STD- Method plus an additional aqueous wash. See Doc_PCB_Washing.pdf. Dimensions.,.,.,.,.,9., Unless otherwise noted, tolerance for all dimensions ±./,. +. /. +, /, rd color dot over pin st color dot over pin.,.,., Recommended Land Pattern.,.,., Dimensions are in inches mm US sales@coilcraft.com UK +--9 sales@coilcraft-europe.com Taiwan +-- sales@coilcraft.com.tw China +-- sales@coilcraft.com.cn Singapore + - sales@coilcraft.com.sg Document 9 Revised // Coilcraft Inc.
2 Document 9- Surface Mount Wideband RF Tranformers Impedance Insertion Pins - Pins - ratio Bandwidth Idc loss max L min DCR max L min DCR max Type Part number pri:sec (MHz) (ma) (db) (µh) (Ohms) (µh) (Ohms) Color code Type A Type B Type C TTWB--AL_ : Black Black Green TTWB-.-AL_ : Black Brown Green TTWB--AL_ : Black Red Green TTWB--AL_ : Black Yellow Green TTWB--AL_ : Black Orange Green TTWBL_ : Black Black Black TTWB-L_ : Black Black Violet TTWBL_ : Black Black Brown TTWBL_ : Black Black Yellow TTWB--BL_ : Brown Black Green TTWB-.-BL_ : Brown Brown Green TTWB--BL_ : Brown Red Green TTWB--BL_ : Brown Yellow Green TTWB--BL_ : Brown Orange Green TTWBL_ : Brown Black Black TTWB-L_ : Brown Black Violet TTWBL_ : Brown Black Yellow TTWB--CL_ : Red Black Green TTWB-.-CL_ : Red Brown Green TTWB--CL_ : Red Red Green TTWB--CL_ : Red Yellow Green TTWBL_ : Red Black Black TTWB-L_ : Red Black Violet TTWBL_ : Red Black Brown TTWBL_ : Red Black Yellow. When ordering, please specify termination and packaging codes: TTWB--ALD Termination: L = RoHS compliant tin-silver-copper over silver-platinum-glass frit. Special order: S = non-rohs tin-lead (/). Packaging: D = " machine ready reel. EIA- embossed plastic tape, parts per full reel. B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($ charge), use code letter D instead.. Impedance ratio is for the full primary winding to the full secondary winding.. Inductance tested at khz,. Vrms, Adc.. Electrical specifications at C. Refer to Doc Soldering Surface Mount Components before soldering. US sales@coilcraft.com UK +--9 sales@coilcraft-europe.com Taiwan +-- sales@coilcraft.com.tw China +-- sales@coilcraft.com.cn Singapore + - sales@coilcraft.com.sg Document 9- Revised // Coilcraft Inc.
3 Document 9- Type A Transformers TTWB--A db bandwidth. - MHz.. TTWB-.-A db bandwidth. - MHz.. TTWB--A db bandwidth. - MHz.. TTWB--A db bandwidth. - MHz.. TTWB--A db bandwidth. - MHz TTWB db bandwidth. - MHz... TTWB- db bandwidth. - MHz.. TTWB db bandwidth. - MHz.. TTWB db bandwidth. - MHz.. Measured on a network analyzer (re: Ohms) US sales@coilcraft.com UK +--9 sales@coilcraft-europe.com Taiwan +-- sales@coilcraft.com.tw China +-- sales@coilcraft.com.cn Singapore + - sales@coilcraft.com.sg Document 9- Revised // Coilcraft Inc.
4 Document 9- Type B Transformers - TTWB--B db bandwidth. - MHz TTWB-.-B db bandwidth. - MHz TTWB--B db bandwidth. - MHz TTWB--B db bandwidth. - MHz.. TTWB--B db bandwidth. - 9 MHz TTWB db bandwidth.- MHz... TTWB- db bandwidth. - MHz.. TTWB db bandwidth. - MHz.. Measured on a network analyzer (re: Ohms) US sales@coilcraft.com UK +--9 sales@coilcraft-europe.com Taiwan +-- sales@coilcraft.com.tw China +-- sales@coilcraft.com.cn Singapore + - sales@coilcraft.com.sg Document 9- Revised // Coilcraft Inc.
5 Document 9- Type C Transformers TTWB--C db bandwidth. - MHz.. TTWB-.-C db bandwidth. - MHz.. TTWB--C db bandwidth. - MHz.. TTWB--C db bandwidth. - MHz TTWB db bandwidth..- - MHz... TTWB- db bandwidth. -- MHz.. TTWB db bandwidth. -- MHz.. TTWB db bandwidth. -- MHz.. Measured on a network analyzer (re: Ohms) US sales@coilcraft.com UK +--9 sales@coilcraft-europe.com Taiwan +-- sales@coilcraft.com.tw China +-- sales@coilcraft.com.cn Singapore + - sales@coilcraft.com.sg Document 9- Revised // Coilcraft Inc.
Mini Wideband Transformers WBC
Document - Mini Wideband Transformers WBC Smallest wideband transformer: mm square mm high Vrms interwinding isolation, / Watt RF input power ma max current rating. Designer s Kit C contains three of each
Wideband Transformers
Document - Wideband Transformers Surface mount and through hole versions Vrms, minute interwinding isolation (hipot), / Watt RF input power ma current rating. For a smaller package size, see our WBC Series
Common Mode Chokes BU Series
Document 60- Common Mode Chokes BU Series These low cost, high performance choke coils are designed to virtually eliminate line conducted common mode noise. The BU9S and BU9HS families are ideal for signal
HP1, HPH1 HP2, HPH2 HP3, HPH3 HP4, HPH4 HP5, HPH5 HP6, HPH6. Winding Layout. Middle 11. Inner
Document - HP, HPH HP, HPH HP, HPH HP, HPH HP, HPH HP, HPH Six : isolated windings that can be connected in series or parallel Tightly coupled windings Power range: 0 Watts as inductor and flyback transformer;
Features wide bandwidth 10 to 3000 MHz balanced transmission line excellent return loss aqueous washable patent pending
Surface Mount top hat RF Transformer 50Ω 10 to 3000 MHz Maximum Ratings Operating Temperature -40 C to 85 C Storage Temperature -55 C to 100 C RF Power 0.4W DC Current 30mA Permanent damage may occur if
HCV1605 High current power inductors
Technical Data 188 High current power inductors pplications Compatible with Picor Cool-Power ZVS Buck and Buck-Boost Regulator Families Environmental data Storage temperature range (Component): -55 C to
Vectron International Temperatur sensor specification TFSS433D 1/6
Vectron International Temperatur sensor specification TFSS433D 1/6 Measurement condition Ambient temperature: 85 C Input power level: 0 dbm Terminating impedance: Input: 50 Output: 50 Characteristics Remark:
CL1208 Multi-phase power inductors
Technical Data 1579 Effective December 216 CL128 Multi-phase power inductors Applications For exclusive use with Maxim Multi-phase controllers Voltage Regulator Modules (VRMs) and high power density VRMs
Vectron International Filter specification TFS 125P 1/5
Vectron International Filter specification TFS 125P 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 115 Ω -21 pf Output: 110 Ω -35 pf Characteristics
RF Transformer TCM2-672X+ Surface Mount. 50Ω 1700 to 6700 MHz
Surface Mount top hat RF Transformer 50Ω 1700 to 6700 MHz The Big Deal Wideband, 1700 to 6700 MHz Low insertion loss, 1.1 db Flat insertion loss, ±0.4 db typ. Good input return loss, 12 to 31 db typ. Low
CMS Common mode inductors, surface mount
Effective October 215 Supersedes March 27 Common mode inductors, surface mount pplications EMI filters DC-DC brick power supplies Discrete output supplies Discrete and point-of-use power supplies (PUPS)
Typical Performance 1. Absolute Maximum Ratings. Parameter
Device Features Typical Isolation = 23 db Typical Insertion Loss = 0.5 db MSL 3 moisture rating Lead-free/RoHS-compliant SOIC-8 Plastic Package With exposed back side ground pad Product Description BeRex
Model B0922N7575AHF Rev B. Ultra Low Profile 0404 Balun
Model B9N7575AHF Ultra Low Profile 44 Balun 75Ω to 75Ω Balanced Description The B9N7575AHF is a low profile, low impedance mm square subminiature wideband unbalanced to balanced transformer designed for
HCV1707 High current power inductors
Technical Data 10712 High current power inductors Applications Compatible with Picor Cool-Power ZVS Buck and Buck-Boost Regulator Families Environmental data Storage temperature range (Component): -55
SMD High Frequency Power Inductor. Designed for Utility Regulator Applications
FEATURES Recommended for use with all major Voltage Regulator ICs High Current handling capability in the smallest footprint Up to 2MHz operating frequency Extended operating temperature range: -4C to
Typical Performance 1. Absolute Maximum Ratings. Parameter
Device Features Typical Isolation = 23 db Typical Insertion Loss = 0.4 db MSL 3 moisture rating Lead-free/RoHS-compliant SOIC-8 Plastic Package With exposed back side ground pad Product Description BeRex
Shielded Power Inductors
Shielded Power Inductors MN509 Shielded inductor with minimum EMI Minimum power loss Non standard values available Low DC resistance Flat top for SMT operations Specifications Inductance tested at 100KHz
SMD High Frequency Power Inductor. Designed for VRD & VRM 10.x & 11.x Applications
Designed for VRD & VRM 1.x & 11.x Applications FEATURES Recommended for use with all major Voltage Regulator ICs High Current handling capability in the smallest footprint Up to 2MHz operating frequency
Applications impedance matching balanced to unbalanced transformation push-pull amplifier. FREQUENCY (MHz) 1 db MHz
Surface Mount RF Transformer 50Ω 3 to 300 MHz Maximum Ratings Operating Temperature -20 C to 85 C Storage Temperature -55 C to 100 C RF Power 0.25W DC Current Pin Connections 30mA Permanent damage may
Vectron International Temperatur sensor specification TFSS434B 1/6
Vectron International Temperatur sensor specification TFSS434B 1/6 Measurement condition Ambient temperature: 85 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics
Model BD3238N5050AHF. Ultra Low Profile 0404 Balun
Model BD338N55AHF Ultra Low Profile 44 Balun 5Ω to 5Ω Balanced Description The BD338N55AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and
VI TELEFILTER Filter specification TFS 248F 1/5
VI TELEFILTER Filter specification TFS 248F 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 200 Ω Characteristics Remark: The reference
Vectron International Resonator Specification TFR 832 1/5
Vectron International Resonator Specification TFR 832 1/5 Measurement condition Ambient temperature: 25 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:
3dB HYBRID COUPLER. Amplitude Balance db (max) ± ± to +85
FEATURES High Power Low Profile Surface Mount Package Very Low Insertion Loss Excellent Amplitude and Phase Balance High Isolation RoHS Tape and Reel for High Volume Production APPLICATIONS Power Amplifiers
MTE1 Series Isolated 1W Single Output SM DC/DC Converters
MTE1 Series SELECTION GUIDE FEATURES Single isolated output 1kVDC Isolation Typical efficiency 86% Wide temperature performance at full 1 Watt load, 4 C to 85 C UL 94V- Package material 3.3V, 5V, 12V,
DR1050 Shielded power inductors
Shielded power inductors Supersedes March 2007 Applications LED/LCD backlighting High definition televisions (HDTV) Server and desktop power supplies Graphics cards and battery powered systems Point-of-load
CLB1108 Multi-phase power inductors
Multi-phase power inductors Supersedes December 2013 Applications For exclusive use with Volterra or Maxim VPR-Devices Environmental Data Storage temperature range (component): -40 C to +125 C Operating
GENERAL PURPOSE TRANSFORMERS
Watt Pulse, Electrostatically Shielded, 00 mw Pulse, RF Pulse, and Control Transformers Wide range of inductors and turns ratios Suitable for a variety of applications High flux density capability Available
VI TELEFILTER Filter specification TFS 130C 1/5
VI TELEFILTER Filter specification TFS 130C 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 130 Ω -11.6 pf Output: 86 Ω -11.8 pf Characteristics
Vectron International Filter specification TFS180L 1/5
Vectron International Filter specification TFS180L 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 205.51 Ω -23.24 pf Output: 141.63 Ω - 31.49
DR1040 Shielded power inductors
Shielded power inductors Supersedes March 007 Applications LED/LCD backlighting High definition televisions (HDTV) Server and desktop power supplies Portable electronics Graphics cards and battery powered
Top View (Near-side) Side View Bottom View (Far-side) ± ±.08. 4x.28. Orientation Marker Balanced port 1.
Model BD2FAHF Ultra Low Profile 168 Balun Ω to Ω Balanced Description The BD2FAHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential input locations on data conversion
Model BD2425N50200AHF. Ultra Low Profile 0404 Balun 50Ω to 200Ω Balanced
Model BD45N5AHF Ultra Low Profile 44 Balun 5Ω to Ω Balanced Description The BD45N5AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and output
Vectron International Filter specification TFS 243E 1/5
Vectron International Filter specification TFS 243E /5 Measurement condition Ambient temperature T A: 23 C Input power level: 0 dbm Terminating impedance: * Input: 350 Ω -3.8 pf Output: 350 Ω -3.8 pf Characteristics
FP1309B High frequency, high current power inductors
Technical Data 10477 High frequency, high current power inductors Applications Servers Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) Server and desktop Central processing unit (CPU)
Vectron International Filter specification TFS246R 1/5
Vectron International Filter specification TFS26R 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedances*): input: 695 Ω -1.9 pf output: 695 Ω -1.9 pf Characteristics
Vectron International Filter specification TFS 1632A 1/5
Vectron International Filter specification TFS 1632A 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 183 Ω -0,42 pf Output: 45 Ω -0,47 pf Characteristics
2 Way-0 Power Splitter/Combiner GP2Y+ Typical Performance Data
MMIC Surface Mount Power Splitter/Combiner 2 Way-0 50Ω 1600 to 3300 MHz Maximum Ratings Operating Temperature -40 C to 85 C Storage Temperature -65 C to 150 C Power Input (as a splitter) 1.5W max. Internal
Electrical Specifications. Insertion to +85 TOP VIEW SIDE VIEW BOTTOM VIEW. Pin 2. Yantel Corporation
Description The is a low profile, high performance 20dB directional coupler. It is designed for DCS & PCS applications. This component is suitable for feed-forward amplifier and signal sampling circuits
2 Way-0 Power Splitter/Combiner GP2S1+ Typical Performance Data
MMIC Surface Mount Power Splitter/Combiner 2 Way-0 50Ω 500 to 2500 MHz Maximum Ratings Operating Temperature -40 C to 85 C Storage Temperature -65 C to 150 C Power Input (as a splitter) 1.5W max. Internal
MPI40-V2 High current, low profile, miniature power inductors
Applications Handheld/mobile devices Portable media players Notebook/netbook/laptop regulators Tablets/smartbooks Battery operated devices LED drivers LCD displays Point-of-load (POL) converters Product
Detailed Electrical Specifications: Specifications subject to change without notice. Broadband Narrowband 25 C
fee Ultra Low Profile 85 Balun 75Ω to 75Ω Balanced Description The B225J7575AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output locations on
Vectron International Filter specification TFS 600 1/5
Vectron International Filter specification TFS 600 /5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 270 Ω -0,8 pf Output: 285 Ω -0,8 pf Characteristics
Typical Performance Data
Ceramic Balun RF Transformer 50Ω 720 to 1600 MHz Maximum Ratings Operating Temperature -40 C to 85 C Storage Temperature -55 C to 100 C Input RF Power*** 3W **Derate linearly to 2.5W at 100 C Permanent
MIL-STD 1553 Interface Transformers - DBIT x 3 S
Electrical Data ( C ) - : - - : - MIL-STD Interface Transformers - DBIT x S () (-) () (-) (mh) min at khz-v DBIT S : : 0.0. Lp (-) DBIT S. :. :. Lp (-) DBIT S. :. :. Lp (-) DBIT S. :. :. Lp (-) DBIT S
Vectron International Filter specification TFS 942G 1/5
Vectron International Filter specification TFS 942G 1/5 Measurement condition Ambient temperature: 23 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The
Kun Shan MAZO tech Co., Ltd
Page : 1 / 1 High Current, Power Inductors MPCA-63-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 7.3x6.8x 3.mm maximum surface mount package Powder iron core material
Model BD4859L50100A00 Rev A
Model BD4859L51A Ultra Small Low Profile 63 Balun 5Ω to 1Ω Balanced Description The BD4859L51A is an ultra-small low profile balanced to unbalanced transformer designed for differential inputs and output
Kun Shan MAZO tech Co., Ltd
Page : 1/9 High Current, Power Inductors LPCA-14-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 11.5x1.3x 4.mm maximum surface mount package Powder iron core material
Return loss (db) Insertion loss (db) .56±.06 TBD. GND / DC Feed 1 + RF GND 2. Unbalanced Port Balanced Port Balanced Port.
Model BD6N5AHF Ultra Low Profile 44 Balun 5Ω to Ω Balanced Description The BD6N5AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and output
FP1008R7 High frequency, high current power inductors
Technical Data 1629 Effective December 216 FP18R7 High frequency, high current power inductors Applications Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) and high power density VRMs
Vectron International Filter specification TFS1220 1/5
Vectron International Filter specification TFS1220 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 146 Ω -0.9 pf Output: 146 Ω -0.9 pf Characteristics
Model BD1631J50100AHF
Model BD1631J51AHF Ultra Low Profile 85 Balun 5Ω to 1Ω Balanced Description The BD1631J51AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output
Model BD1722J50100A00
Ultra Low Profile 85 Balun 5Ω to 1Ω Balanced Description The BD1722J51A is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output locations on next generation
MPI25-V2 High current, low profile, miniature power inductors
Technical Data 649 Effective July 8 MPI-V High current, low profile, miniature power inductors Product features High current carrying capacity in a compact standard 8 ( metric) footprint Magnetically shielded,
FP2207R High frequency, high current power inductors
Technical Data 10673 High frequency, high current power inductors Applications Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) and highpower density VRMs Server and desktop Central processing
Vectron International Filter specification TFS 868P 1/5
Vectron International Filter specification TFS 868P 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 80 Ω -1.7 pf Output: 80 Ω -1.7 pf Characteristics
Vectron International Filter specification TFS /5
Vectron International Filter specification TFS 1795 1/5 Measurement condition Ambient temperature: 2 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The maximum
DR1030 Shielded power inductors
Supersedes March 2007 Applications LED/LCD backlighting High definition televisions (HDTV) Server and desktop power supplies Portable electronics Notebook and laptop regulators Graphics cards and battery
Features wideband, DC to 2500 MHz excellent VSWR, through entire band miniature size, SOT143 package aqueous washable ATTENUATION. (db) Flatness, Max.
Miniature Surface Mount Fixed Attenuator 50Ω 0.5W 7dB DC to 2500 MHz Maximum Ratings Operating Temperature -55 C to 85 C Storage Temperature -55 C to 100 C Permanent damage may occur if any of these limits
Chip Inductor INTRODUCTION FEATURE AND APPLICATION. Feature. Application
INTRODUCTION Multilayer Chip Inductor is an electronic part that uses in resonance circuit, for noise suppression and for impedance matching in the electrical circuit. SAMSUNG Electro-mechanics has 2 series
Model PD0409J7575S2HF
Model PD49J77SHF Ultra Low Profile 8 Power Divider 7Ω to 7Ω Description The PD49J77SHF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD49J77SHF is
Automotive grade Dual winding, high power density shielded drum core power inductors
Supersedes September 07 Dual winding, high power density shielded drum core power inductors Product features AEC-Q00 qualified Dual winding inductors that can be used as a single inductor, SEPIC, Flyback,
Vectron International Filter specification TFS 400L 1/5
Vectron International Filter specification TFS 400L 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 200 Ω Output: 200 Ω Characteristics Remark:
VI TELEFILTER Filter specification TFS /5
VI TELEFILTER Filter specification TFS 2100 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark: The maximum
Model PD0409J5050S2HF
Model PD49JSHF Ultra Low Profile 8 Power Divider Ω to Ω Description The PD49JSHF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD49JSHF is ideal for
Model PD3150J5050S2HF
Model PD315J55S2HF Ultra Low Profile 85 Power Divider 5Ω to 5Ω Description The PD315J55S2HF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD315J55S2HF
Kun Shan MAZO tech Co., Ltd
Page : 1 / 8 High Current, Power Inductors MPCA-412-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 4.75 x 4.45 x 1.2mm maximum surface mount package Powder iron core
ICL Series SMD Wirewound Chip Open-Type Inductors - ICL0603, ICL0805
SMD Wirewound Chip Open-Type s - ICL0603, ICL0805 CONFIGURATIONS: FEATURES Lower profile,high frequency Higher possible SRFs as well as excellent Q Value Higher current in compact size Customer design
Model PD2328J5050S2HF
Model PD2328J55S2HF Ultra Low Profile 85 Power Divider 5Ω to 5Ω Description The PD2328J55S2HF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD2328J55S2HF
Vectron International Filter specification TFS 281 1/5
Vectron International Filter specification TFS 281 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 183 Ω -12.5 pf Output: 172 Ω -12.6 pf Characteristics
TT9 SMT Series. Attenuator Chip 500 Milliwatts
Attenuator Chip 500 Milliwatts TT9 SMT Series Attenuator Chip 500 Milliwatts TT9 SMT Series, specifically designed for surface mount broadband applications which require more power. Smiths Interconnect
Tfs248e.doc version VI TELEFILTER Filter specification TFS 248 E 1/5. D a t a typ. Value Limit
Filter specification TFS 248 E 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedances at f c *) Input: 560 Ω -5.9pF Characteristics Output: 500 Ω -6.3 pf Remark:
Preliminary Datasheet
Device Features This can be operated at Vd of 3.0V N.F = 0.78 db @ 1850MHz at Demo board 31.5 dbm Output IP3 at 0dBm/tone at 1850MHz 15.6 db Gain at 1850MHz 17.7 dbm P1dB at 1850 MHz Lead-free/Green/RoHS
Model DC4859J5005AHF. Ultra Low Profile db Directional Coupler
Model DC4859J55AHF Ultra Low Profile 85 5 db Directional Coupler Detailed Electrical Specifications: Specifications subject to change without notice. Features: 47-59 MHz Mean Coupling 5dB Ultra Low Insertion
CMC 14 Common Mode Chokes Series
7 Electrical Data ID Code Inductance Value at C (-/+%) Less than % performance variations versus temperature (- C / + C) Minimum impedance attenuation : Ω from khz to MHz Compact SMD package (x pins) Applied
HCM1707. High current power inductors. Technical Data Applications
Supersedes August Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-load modules Desktop and server VRMs and EVRDs Data networking and storage systems Base station equipment Battery
Insertion loss (db) Return Loss (db) 4x x x Orientation Marker Denotes Pin Location
Model DC1722J55AHF Ultra Low Profile 85 5 db Directional Coupler Detailed Electrical Specifications: Specifications subject to change without notice. Description The DC1722J55AHF is a low cost, low profile
VI TELEFILTER Filter Specification TFS 211 C 1/5
Filename: tfs211c.doc version 3.0 23.01.2002 Filter Specification TFS 211 C 1/5 Measurement condition Ambient temperature: 20... 25 C Input power level: 5 ± 2 dbm terminating impedances * Input: 1,1 kω
Vectron International Filter specification TFS 400P 1/5
Vectron International Filter specification TFS 400P /5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 280 Ω -6, pf Output: 440 Ω -5,2 pf Characteristics
VI TELEFILTER Filter specification TFS 915D 1/5
Filter specification TFS 915D 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark: The maximum attenuation
Vectron International Filter specification TFS /5
Vectron International Filter specification TFS 1960 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:
discontinued October 31, 2017 or until inventory is
Supersedes June 2017 Applications Computer and portable power devices LCD panels, DVD players Inductor: DC-DC converters Buck, boost, forward, and resonant converters Noise filtering and filter chokes
Top View (Near-side) Side View Bottom View (Far-side) .89±.08. 4x.280. Orientation Marker Orientation Marker.
Model B2F2AHF Ultra Low Profile 168 Balun Ω to 2Ω Balanced Description The B2F2AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential input locations on data conversion
Vectron International Filter specification TFS 737 1/5
Vectron International Filter specification TFS 737 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark: The
- 01dB = 1dB, - 02dB = 2dB, - 03dB = 3dB, - 04dB = 4dB, - 05dB = 5dB, - 06dB = 6dB, - 07dB = 7dB, - 08dB = 8dB, - 09dB = 9dB, - 10dB = 10dB
AT02M0.09 - Page 1 of 13 Product Family: Part Number Series: Temperature Variable Attenuators ATV112F Series Construction: High purity Alumina Substrate Thermo-sensitive thermistor Ni alloy thin-film resistive
CCM Broadband Conical Inductor
Return Insertion CCM Broadband Conical Inductor Substrate Mounted For Chip & Applications Broadband performance to 40 Ghz Integrated 50Ω Microstrip Low Insertion Loss -.35 db Perfect for Bias Tee Applications
Metal Film MELF Resistors
FEATURES SURFACE MOUNT IN SIZES 0102 (0805), 0204 (1406) AND 0207 (2410) HIGH RELIABILITY AEC-Q200 QUALIFIED (see part numbering system for details) THIN FILM CONSTRUCTION AVAILABLE IN PRECISION TOLERANCE
Features. Block Diagram
Features WATT SMT SINGLE SMT Technology 2:1 Input Range Efficiency up to 8 I/O Isolation 100 Short Circuit Protected MTBF > 1,000,000 Hours RoHS Compliant MSL2 (Moisture Sensitivity Level) per IPC/JEDEC
Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.
Device Features NF = 0.95 db @ 900MHz at RF connectors of Demo board Gain = 20.5 db @ 900 MHz OIP3 = 30.0 dbm @ 1900MHz Output P1 db = 17.5 dbm @ 900MHz 5V/27mA, MTTF > 100 Years, MSL 1, Class 0 Lead-free/RoHS-compliant
Monolithic Amplifier LEE2-6+ Surface Mount. DC to 7 GHz. The Big Deal
Surface Mount Monolithic Amplifier 50Ω DC to 7 GHz The Big Deal Low Noise figure, 2.3 db at 2 GHz Low Current, 16 ma Broadband matched CASE STYLE: MC1630-1 Product Overview (RoHS compliant) is wideband
Vectron International Filter specification TFS 500 1/5
Vectron International Filter specification TFS 500 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 415 Ω -1 pf Output: 415 Ω -1 pf External
HCM1104 High current power inductors
Technical Data 4370 High current power inductors Supersedes September 2017 Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-Load modules Desktop and server VRMs and EVRDs Base
SPECIFICATIONS. Metal Film Precision Resistor. CSRV-Serie SWISSDIS. Swissdis AG Grasweg 7 CH-4911 Schwarzhäusern
SWISSDIS Swissdis AG Grasweg 7 CH-4911 Schwarzhäusern Tel.: +41 62 919 44 00 Fax: +41 62 919 44 01 info@swissdis.ch www.swissdis.ch SPECIFICATIONS Metal Film Precision Resistor CSRV-Serie Version August
HCM1305. High current power inductors. Technical Data Applications. Environmental data. Product features
Supersedes June 2014 Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-load modules Desktop and server VRMs and EVRDs Base station equipment Notebook and laptop regulators Battery
Voltage Controlled Oscillator
Surface Mount Voltage Controlled Oscillator Wide Band 612 to 1200 MHz Features very wide band, 612 to 1200 MHz linear tuning sensitivity, 26-68 MHz/V typ. low phase noise, -139 dbc/hz at 1 MHz offset,
Vectron International Filter specification TFS 121 1/5
Vectron International Filter specification TFS 121 1/ Measurement condition Ambient temperature: 23 Input power level: 0 dbm Terminating impedance: * Input: 130 Ω II 1,7 pf Output: 130 Ω II 1,7 pf Characteristics
SBB-3089Z Pb MHz InGaP HBT Active Bias Gain Block
Product Description Sirenza Microdevices SBB-389Z is a high performance InGaP HBT MMIC amplifier utilizing a Darlington configuration with an active bias network. The active bias network provides stable
SBB-1089 SBB-1089Z MHz, Cascadable Active Bias InGaP/GaAs HBT MMIC Amplifier
Product Description Sirenza Microdevices SBB89 is a high performance InGaP HBT MMIC amplifier utilizing a Darlington configuration with an active bias network. The active bias network provides stable current
Monolithic Amplifier MNA-6W+ High Directivity. 0.5 to 5.5 GHz
High Directivity Monolithic Amplifier 50Ω 0.5 to 5.5 GHz The Big Deal Integrated matching, DC Blocks and bias circuits Excellent Active Directivity Operates over 2.8-5V CASE STYLE: DQ849 Product Overview