Features. Block Diagram

Size: px
Start display at page:

Download "Features. Block Diagram"

Transcription

1 Features WATT SMT SINGLE SMT Technology 2:1 Input Range Efficiency up to 8 I/O Isolation 100 Short Circuit Protected MTBF > 1,000,000 Hours RoHS Compliant MSL2 (Moisture Sensitivity Level) per IPC/JEDEC J-STD-0D Selection Chart Model Input Range Output Min Max Power W 12SR.700SMT S.600SMT S12.20SMT S1.0SMT SR.700SMT S.600SMT S12.20SMT S1.0SMT SR.700SMT S.600SMT S12.20SMT S1.0SMT Block Diagram 2401 Stanwell Drive, Concord Ca. 94 Ph: Fax: sales@calex.com

2 Input Parameters WATT SMT SINGLE Model 12SR.700SMT 12S.600SMT 12S12.20SMT 12S1.0SMT Units 27 Reflected Ripple 2 Under Voltage Shutdown 8 Reverse Polarity Input Currrent 0. A Short Circuit Input Power 100 mw Efficiency Switching Frequency 00 khz Internal Power Dissipation 200 mw Recommended Fuse 70 Slow Blow Type Model 24SR.700SMT 24S.600SMT 24S12.20SMT 24S1.0SMT Units 127 Reflected Ripple 1 Under Voltage Shutdown 16 Reverse Polarity Input Currrent 0. A Short Circuit Input Power 100 mw Efficiency Switching Frequency 00 khz Internal Power Dissipation 200 mw Recommended Fuse 0 Slow - Blow Type Model 48SR.700SMT 48S.600SMT 48S12.20SMT 48S1.0SMT Units 6 Reflected Ripple 10 Under Voltage Shutdown 2 Reverse Polarity Input Currrent 0. A Short Circuit Input Power 100 mw Efficiency Switching Frequency 00 khz Internal Power Dissipation 200 mw Recommended Fuse 0 Slow - Blow Type Stanwell Drive, Concord Ca. 94 Ph: Fax: sales@calex.com 2

3 Models 12SR.700SMT 24SR.700SMT 48SR.700SMT Output Parameters 12S.600SMT 24S.600SMT 48S.600SMT WATT SMT SINGLE 12S12.20SMT 24S12.20SMT 48S12.20SMT 12S1.0SMT 24S1.0SMT 48S1.0SMT Output Voltage Output Current Output Voltage Accuracy Load Regulation Io = to 100 Line Regulation Vin = Min. to Max. Ripple & Noise (MHz) Ripple & Noise (MHz) Over Line, Load & Temp ±0. ±1.0 ±0. ±1.0 ±0.1 ± Units mv P-P 100 mv P-P Ripple & Noise (MHz) 10 mv RMS Over Load 1 Transient Recovery Time, 2 Load Step Change Transient Response Deviation, 2 Load Step Change Temperature Coefficient Short Circuit Protection 0 00 ±2 ±6 ±0.01 ±0.02 Continuous µs / ºC Notes: (1) Specifications typical at Ta=+2ºC, resistive load, nominal input voltage, full rated output current unless otherwise noted. (2) Transient recovery time is measured to within 1 error band for a step change in output load 7 to 100. () The Watt SMT Single series has limitation of maximum connected capacitance at the output. The power module may be operated in current limiting mode during start-up, affecting the ramp-up and the startup time. For optimum performance we recommend 4700µF maximum capacitive load. (4) When measuring peak-to-peak output noise, use a Cout 0.47µF ceramic capacitor. Scope measurement should be made by using a BNC socket, measurement bandwidth is 0-MHz. Position the load between 0mm and 7mm from the DC/DC converter. () Specifications subject to change without notice. (6) Water Washability - It is not recommended to use water-wash process on W SMT units. (7) RoHS Compliance means conformity to EU Directive 02/9/ EC of 27 January 0, on the restriction of the use of certain hazardous substances in electrical and electronic equipment, lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyls, and polybrominated diphenyl ethers are not present in quantities exceeding the following maximum concentrations in any homogeneous material, except for applicable exemptions. 0.1 (by weight of homogeneous material) lead, mercury, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, or 0.01 (by weight of homogeneous material) cadmium. The RoHS marking is as follows. General Specifications Isolation Isolation Voltage, 60 seconds Isolation Resistance, 00 Isolation Capacitance, 100kHz, 1V Environmental All Models MTBF (Calculated), 2ºC, Ground Benign Operating Temperature Storage Temperature Units Mohms pf 1,000,000 h Humidity 9 Cooling General Case Size Case Material ºC ºC Free-Air Convection 1.27 x 0.74 x 0.4 inches 2. x 18.8 x 10.2 mm Non Conductive Black Plastic Weight 8.8g 2401 Stanwell Drive, Concord Ca. 94 Ph: Fax: sales@calex.com

4 WATT SMT SINGLE Derating Curve Testing Input reflected-ripple current is measured with an inductor Lin (4.7µH) and Cin (2µF, ESR < 1.0Ω at 100kHz) to simulate source impedance. Capacitor Cin, offsets possible battery impedance. Current ripple is measured at the input terminals of the module, measurement bandwidth is 0-00kHz. Efficiency vs Input Voltage Input Source Impedance The power module should be connected to a low acimpedance input source. Highly inductive source impedances can affect the stability of the power module. In applications where power is supplied over long lines and output loading is high, it may be necessary to use a capacitor at the input to ensure startup. Capacitor mounted close to the power module helps ensure stability of the unit, it is recommended to use a good quality low Equivalent Series Resistance (ESR < 1.0Ω at 100kHz) capacitor of.µf for the 12V input devices and a 1.µF for the 24V and 48V devices.. Efficiency vs Output Load Output Ripple Reduction A good quality low ESR capacitor placed as close as practicable across the load will give the best ripple and noise performance. To reduce output ripple, it is recommended to use..µf capacitors at the output Stanwell Drive, Concord Ca. 94 Ph: Fax: sales@calex.com 4

5 Case Mechanical Dimensions inches (mm) WATT SMT SINGLE Pin Name 1 -INPUT 2 -INPUT NC 10 NC 11 NC 12 NC 1 +OUTPUT 14 NC 1 -OUTPUT 22 NC 2 +INPUT 24 +INPUT Connecting Pin Pattern Dimensions are mm (±0.0) TOLERANCE: ALL DIMENSIONS ARE ICAL IN INCHES (mm) UNLESS OTHERWISE NOTED: X.X ±0.01 (0.2) X.XX ±0.00 (0.1) PINS ±0.002 (0.0) Typical Application 2401 Stanwell Drive, Concord Ca. 94 Ph: Fax: sales@calex.com

MIW3000 Series EMI. 5-6W, Wide Input Range DIP, Single & Dual Output DC/DC Converters MINMAX. Block Diagram. Key Features

MIW3000 Series EMI. 5-6W, Wide Input Range DIP, Single & Dual Output DC/DC Converters MINMAX. Block Diagram. Key Features -6W, Wide Input Range DIP, Single & DC/DC s Key Features Efficiency up to 10 Isolation MTBF > 1,000,000 Hours 2:1 Wide Input Range UL19 Safety Approval Complies with EN22 Class A Temperature Performance

More information

Distributing Tomorrow s Technologies For Today s Designs Toll-Free:

Distributing Tomorrow s Technologies For Today s Designs Toll-Free: 3W, Wide Input Range DIP, Single & DC/DC s Key Features Efficiency up to 82 Isolation MTBF > 1,000,000 Hours 2:1 Wide Input Range Low Cost Complies with EN022 Class A Temperature Performance -2 to +71

More information

OVP 2:1. Wide Range. Protection

OVP 2:1. Wide Range. Protection 10W, Wide Input Range DIP, Single & Dual Output DC/DC s Key Features High Efficiency up to 88 10 Isolation MTBF > 1,000,000 Hours 2:1 Wide Input Range CSA9-1 Safety Approval Complies with EN522 Class A

More information

Distributing Tomorrow s Technologies For Today s Designs Toll-Free:

Distributing Tomorrow s Technologies For Today s Designs Toll-Free: 2W, Wide Input Range DIP, Single & DC/DC s Key Features Efficiency up to 81 Isolation MTBF > 1,000,000 Hours 2:1 Wide Input Range CSA1 Safety Approval Low Ripple and Noise Short Circuit Protection Complies

More information

40 Watt TMF Single and Dual Series

40 Watt TMF Single and Dual Series Watt TMF Single and Dual Series Efficiency up to 91% 10VDC Isolation MTBF > 328,000 Hours 4:1 Wide Input Over Voltage Protection Short Circuit Protection Six Sided Shielding Remote On/Off Control RoHS

More information

25 Watt QMZ Single and Dual Series

25 Watt QMZ Single and Dual Series Single and Dual Series Efficiency up to % 10 VDC Isolation 4:1 Ultra Wide Input Range Remote On/Off Control No Minimum Requirement Six Sided Shielding Trim RoHS Compliant CSA Approved Model Number Voltage

More information

Efficiency (typ.) (Range) Load VDC VDC ma ma(typ.) ma(typ.) μf % MCWI05-12S

Efficiency (typ.) (Range)  Load VDC VDC ma ma(typ.) ma(typ.) μf % MCWI05-12S FEATURES Smallest Encapsulated 5W Ultracompact SIP8 Package Ultrawide 4 : 1 Input Voltage Range Fully Regulated Output Voltage I/O Isolation 1500 VDC Operating Ambient Temp. Range40 to 75 No Min. Requirement

More information

(typ.) (Range) Parameter Model Min. Typ. Max. Unit

(typ.) (Range) Parameter Model Min. Typ. Max. Unit FEATURES Smallest Encapsulated 20W! Package Size 1.0 x1.0 x0.4 Ultra-wide 4:1 Input Range Very high Efficiency up to % Operating Temp. Range - C to +85 C Output Voltage Trimmable I/O-isolation Voltage

More information

Efficiency (typ.) (Range) Load. Output Current Input Current Reflected Ripple

Efficiency (typ.) (Range)  Load. Output Current Input Current Reflected Ripple FEATURES Highest Power Density 1" x 1" x 0.4" Shielded Metal Package Ultra Wide 4:1 Input Range Excellent Efficiency up to % Operating Temp. Range - C to + C Optional Heatsink I/O-isolation Voltage 10VDC

More information

Efficiency (typ.) (Range) Max. Load VDC VDC ma ma ma(typ.) ma(typ.) μf % MJWI10-24S033

Efficiency (typ.) (Range) Max.  Load VDC VDC ma ma ma(typ.) ma(typ.) μf % MJWI10-24S033 FEATURES Package Size 1.0 x1.0 x0.4 Ultrawide 4:1 Input Range High Efficiency up to 87% Operating Temp. Range 40 C to 80 C I/Oisolation Voltage 1500VDC Remote On/Off Control Input Filter complies to EN55022,Class

More information

Output Current Input Current Load Regulation

Output Current Input Current Load Regulation PB01S/D series 1W DC/DC CONVERTER, SIP-Package FEATURES Efficiency up to 1% SIP Package with Industry Standard Pinout Package Dimension: 5V&12V Models: 19.5 x 10.2 x 6.1 mm (0.77 x 0.4 x 0.24 ) 15V&24V

More information

MLSR100 Series. High Efficiency, 1.0A Surface Mount, POL Switching Regulators. Key Features:

MLSR100 Series. High Efficiency, 1.0A Surface Mount, POL Switching Regulators.   Key Features: MLSR100 Series High Efficiency, 1.0A Surface Mount, POL Switching Regulators Electrical Specifications Specifi cations typical @ +25 C, nominal input voltage & rated output current, unless otherwise noted.

More information

200 WATT TH SERIES DC/DC CONVERTERS

200 WATT TH SERIES DC/DC CONVERTERS Features 4:1 Input voltage range High power density Small size 2.4 x 2.28 x 0.65 Efficiency up to 90 Excellent thermal performance with metal case Pulse-by-pulse current limiting Over-temperature protection

More information

Output Current Max (ma) Isolation (VDC)

Output Current Max (ma) Isolation (VDC) Models Single output Model Input FEATURES: RoHS Compliant Operating Temperature - C to + 85 C High Efficiency up to 84% Continuous Short Circuit Protection Remote On / Off Control Wide 2:1 Input Range

More information

Output Input Efficiency PARD (mvp-p) Vin Nom. (V)

Output Input Efficiency PARD (mvp-p) Vin Nom. (V) Features: Small size, minimal footprint SMT/SIP package 5A Output Current (all voltages) High Efficiency: up to 94% High reliability RoHS Compliant Cost efficient open frame design Output voltage programmable

More information

PRODUCT OVERVIEW. APPLICATIONS: Distributed Power Architectures Mobile telecommunication Industrial applications Battery operated equipment

PRODUCT OVERVIEW. APPLICATIONS: Distributed Power Architectures Mobile telecommunication Industrial applications Battery operated equipment FEATURES Industry Standard 24-Pin DIP package 15Watts Isolated Output 4:1 Input Range Regulated Outputs Up to 90 % Efficiency Low No Load Power Consumption -40 C to +85 C industrial temperature range Negative

More information

Output Input Efficiency PARD (mvp-p) Vin Nom. Regulation Max (V)

Output Input Efficiency PARD (mvp-p) Vin Nom. Regulation Max (V) Features: Small size, minimal footprint SMT/SIP package A Output Current (all voltages) High Efficiency: up to 9% High reliability RoHS Compliant Cost efficient open frame design Output voltage programmable

More information

Volant NEA005 Series Non-Isolated 5A SIP/SMT DC/DC Converters

Volant NEA005 Series Non-Isolated 5A SIP/SMT DC/DC Converters Typical units FEATURES Small size, minimal footprint SMT/SIP package 5A Output Current (all voltages) High Efficiency: up to 92% High reliability RoHS Compliant Cost efficient open frame design Output

More information

For more information, please visit the product page. input voltage 1 range. output voltage

For more information, please visit the product page. input voltage 1 range. output voltage date 9/12/218 page 1 of 1 SERIES: V78E--SMT DESCRIPTION: NON-ISOLATED DC SWITCHING REGULATOR FEATURES 1 A of output current efficiency up to SMT package industrial operating temp -~+ C designed to meet

More information

ATA 8W Series. Product Descriptions. 8 Watts DC/DC Converter

ATA 8W Series. Product Descriptions. 8 Watts DC/DC Converter 8 Watts DC/DC Converter Page 1 Total Power: 8 Watts Input Voltage: 9 to 36Vdc 18 to 75Vdc # of Outputs: Single, dual Special Features Smallest Encapsulated 8W Converter Industrial Standard DIP16 Package

More information

AS SERIES (2.00 x 1.6 Package) Up to 20 Watt DC-DC Converter

AS SERIES (2.00 x 1.6 Package) Up to 20 Watt DC-DC Converter PRODUCT OVERVIEW The AS series offer up to 20 watts of output power in standard 2.00 x 1.60 x 0.45 inches packages. This series features high efficiency and 1500 Volts of DC isolation. The AS series provides

More information

CV SERIES. 1.8 to 45 Watts VDC, VDC, 10-30VDC Input Ranges Adjustable Output Voltage Non-Isolated DC/DC Converters

CV SERIES. 1.8 to 45 Watts VDC, VDC, 10-30VDC Input Ranges Adjustable Output Voltage Non-Isolated DC/DC Converters DATASHEET CV SERIES 2.-.VDC, 4.-4VDC, 0-30VDC Input Ranges FEATURES Output Current up to 3A Output Power Range 2.-.VDC, 4.-4VDC, and 0-30VDC Input Voltage Ranges High Efficiency - 9% at 2VDC and Full Load

More information

DN03S/D Series DC/DC CONVERTER 2-3W, DIP-Package

DN03S/D Series DC/DC CONVERTER 2-3W, DIP-Package DN03S/D Series DC/DC CONVERTER 2-3W, DIP-Package FEATURES DIP-24 Plastic Package Wide 2:1 Input Range Operating Temp.Range -40 to +85 C Overload Protection No Minimum Load Requirement Isolation voltage

More information

Series AM1L-NZ 1 Watt DC-DC Converter

Series AM1L-NZ 1 Watt DC-DC Converter Click on Series name for product info on aimtec.com Series M1-NZ FETURES: Single, Dual, & Dual Separated Models SMD Package ow ripple and noise High efficiency up to 83% Operating temperature -40 o C to

More information

AA SERIES (1 x 1 Package) Up to 10 Watt DC-DC Converter

AA SERIES (1 x 1 Package) Up to 10 Watt DC-DC Converter FEATURES Industry standard footprint (1 inch X 1 inch) Regulated Outputs, Fixed Switching Frequency Up to 87 % Efficiency Low No Load Power Consumption Designed for use without tantalum capacitors -40

More information

RT1- D3WR Series 1W, FIXED INPUT, ISOLATED & UNREGULATED SINGLE OUTPUT

RT1- D3WR Series 1W, FIXED INPUT, ISOLATED & UNREGULATED SINGLE OUTPUT RT1- D3WR Series 1W, FIXED INPUT, ISOLATED & UNREGULATED SINGLE OUTPUT FEATURES Miniature SMD package 3VDC isolation Operating temperature range: - ~+15 Efficiency up to 81% Internal SMD construction No

More information

Volant NCF010 Series. Non-Isolated 10A SIP DC/DC Converters

Volant NCF010 Series. Non-Isolated 10A SIP DC/DC Converters Features: Small size, minimal footprint/low profile A Output Current (all voltages) High Efficiency: up to 95% High reliability RoHS Compliant Cost efficient open frame design Pre-bias monotonic start-up

More information

Series AM20EW-Z 20 Watt DC-DC Converter

Series AM20EW-Z 20 Watt DC-DC Converter Click on Series name for product info on aimtec.com Models Single output Model FEATURES: Input Voltage RoHS Compliant Soft start Ultra wide 4:1 Input range Industrial temperature range -40 to +85 C Adjustable

More information

MI2000ERW. Series. Miniature 1 x 1 20W, Ultra-Wide 2:1 Input DC/DC Con vert ers. Key Features:

MI2000ERW. Series. Miniature 1 x 1 20W, Ultra-Wide 2:1 Input DC/DC Con vert ers.   Key Features: MI2000ERW Miniature 1 x 1 20W, Ultra-Wide 2:1 Input DC/DC Con vert ers Key Features: 20W Output Power 2:1 Input Voltage Range Miniature 1 x 1 Case 1,500 VDC Isolation Meets CISPR 32/EN 55032 High Efficiency

More information

S24SP series 60W Single Output DC/DC Converter

S24SP series 60W Single Output DC/DC Converter Model List Model Number Input Voltage (Range) Output Voltage Output Current Input Current (typ input voltage) Load Regulation Maxcapacitive Load (Cap ESR>=1mohm;Full Efficiency (typ.) load;5%overshoot

More information

SB_XT-1WR2 Series 1W, FIXED INPUT, ISOLATED & UNREGULATED SINGLE OUTPUT

SB_XT-1WR2 Series 1W, FIXED INPUT, ISOLATED & UNREGULATED SINGLE OUTPUT www.schmid-m.com DC/DC Converter SB_XT-1WR2 Series 1W, FIXED INPUT, ISOLATED & UNREGULATED SINGLE OUTPUT FEATURES Miniature SMD package 1VDC isolation Operating temperature range: -4 ~+15 Internal SMD

More information

V78 XX X SERIES: V DESCRIPTION: NON-ISOLATED SWITCHING REGULATOR MODEL PART NUMBER KEY. RoHS

V78 XX X SERIES: V DESCRIPTION: NON-ISOLATED SWITCHING REGULATOR MODEL PART NUMBER KEY. RoHS date 04//0 page of 7 SERIES: V78-000 DESCRIPTION: NON-ISOLATED SWITCHING REGULATOR FEATURES A current output extremely high efficiency up to 97% no heat sink required pin compatible to LM78XX linear regulators

More information

MLSR7805. Series. Miniature Surface Mount Low Cost, 0.5A POL Switching Regulators.

MLSR7805. Series. Miniature Surface Mount Low Cost, 0.5A POL Switching Regulators. . 7/18 MLSR7805 Miniature Surface Mount Low Cost, 0.5A POL Switching Regulators Key Features: Efficiency to 95% 0.5A Output Current Meets EN 62368 Miniature SMT Case Short Circuit Protected 0.2 ma No-Load

More information

PXD10-Single Output DC/DC Converter

PXD10-Single Output DC/DC Converter PXD10-Single Output DC/DC Converter 9 to 18 Vdc, 18 to 36 Vdc and 36 to 75 Vdc input, 3.3 to 15 Vdc Single Output, 10W Features Single output current up to 2A 10 watts maximum output power 2:1 wide input

More information

Ripple & Max. capacitive Output Current

Ripple & Max. capacitive Output Current 0 Watts xxx Series Wide 4: Input Range Single Output Industry Standard /4 Brick -40 C to +0 C Operation 0 VDC Isolation Output Trim ±0% Remote On/Off Year Warranty Dimensions: QSC0:. x.4 x 0. (.9 x. x.

More information

ISOLATED DC-DC Converter EC4SAW SERIES APPLICATION NOTE

ISOLATED DC-DC Converter EC4SAW SERIES APPLICATION NOTE ISOLATED DC-DC Converter EC4SAW SERIES APPLICATION NOTE Approved By: Department Approved By Checked By Reported By Enoch Wade Joyce Research and Development Department Danny Jack Benny Quality Assurance

More information

Volant NEA005 Series. Non-Isolated 5A SIP/SMT DC/DC Converters. FEATURES. Small size, minimal footprint SMT/SIP package

Volant NEA005 Series. Non-Isolated 5A SIP/SMT DC/DC Converters.   FEATURES. Small size, minimal footprint SMT/SIP package Typical units FEATURES Small size, minimal footprint SMT/SIP package 5A Output Current (all voltages) High Efficiency: up to 92% High reliability RoHS Compliant Cost efficient open frame design Output

More information

AA SERIES (1 x 1 Package) Up to 30 Watt DC-DC Converter

AA SERIES (1 x 1 Package) Up to 30 Watt DC-DC Converter FEATURES Industry standard footprint (1 inch X 1 inch) Regulated Outputs, Fixed Switching Frequency Up to 90 Efficiency Low No Load Power Consumption Designed for use without tantalum capacitors -40 C

More information

S24SE/S24DE series 30W Single/Dual Output DC/DC Converter

S24SE/S24DE series 30W Single/Dual Output DC/DC Converter FEATURES Efficiency up to 89% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: 25.4 x25.4 x10.2mm (1.0 x1.0 x0.40 )(No HSK) Over voltage protection, hiccup mode Over current

More information

CB Patent Protection RoHS

CB Patent Protection RoHS 3W, Ultra wide input isolated & regulated single output DC/DC converter Selection Guide Certification Part No. -- URB2403MT-3WR3 Input Voltage (VDC) Output Efficiency 2 Nominal Output Voltage Output Current

More information

PXD30-xxWS-xx-Single Output DC/DC Converters

PXD30-xxWS-xx-Single Output DC/DC Converters PXD30-xxWS-xx-Single Output DC/DC Converters 9 to 36 Vdc and 18 to 75 Vdc input, 1.5 to 15 Vdc Single Output, 30W Applications Wireless Network Telecom / Datacom Industry Control System Measurement Semiconductor

More information

ISOLATED DC-DC Converter EC2SAN SERIES APPLICATION NOTE

ISOLATED DC-DC Converter EC2SAN SERIES APPLICATION NOTE ISOLATED DC-DC Converter EC2SAN SERIES APPLICATION NOTE Approved By: Department Approved By Checked By Reported By Research and Development Enoch Danny Eunice Department Engineering Department (Quality

More information

Voltage Set-point Accuracy +/-2% max Input Voltage Range +/-10% max. +/-8% max. +/-12% max. Short Circuit Protection Momentary Efficiency 70%-82%

Voltage Set-point Accuracy +/-2% max Input Voltage Range +/-10% max. +/-8% max. +/-12% max. Short Circuit Protection Momentary Efficiency 70%-82% MU SERIES W UNREGULATED FEATURES SINGLE IN LINE PACKAGE UP TO W UNREGULATED POWER 00% BURN IN HIGH EFFICIENCY INTERNAL SMD TECHNOLOGY LOW COST NO HEATSINK REQUIRED UL 94V-0 PACKAGE MATERIAL CUSTOM SOLUTIONS

More information

Input Load (ma) Typ.

Input Load (ma) Typ. 1. Features Wide 4 : 1 Input Range Low Ripple And Noise Input / Output Isolation 1.5K Vdc Or K Vdc 100% Burn-In Input - Filter Custom Design Available Net Weight: 12 g / g Typical RoHS Converter Certified

More information

Switching Regulator. LMT78_1.0R Series Wide input, non-isolated & regulated, single output, SMD package

Switching Regulator. LMT78_1.0R Series Wide input, non-isolated & regulated, single output, SMD package Efficiency up to 95 No need for heat sinks 1.0AMP SMD package Wide input voltage range (4.75V - 36V) Adjustable output voltage Remote ON/OFF control Short circuit protection (SCP), thermal shutdown Very

More information

B_S-1WR2 & B_D-1WR2 Series 1W, FIXED INPUT, ISOLATED & UNREGULATED SINGLE OUTPUT DC-DC CONVERTER

B_S-1WR2 & B_D-1WR2 Series 1W, FIXED INPUT, ISOLATED & UNREGULATED SINGLE OUTPUT DC-DC CONVERTER B_S-1WR2 & B_D-1WR2 Series 1W, FIXED INPUT, ISOLATED & UNREGULATED SINGLE OUTPUT DC-DC CONVERTER PRODUCT FEATURES Efficiency up to 82% Miniature SIP/DIP Package 1VDC Isolation Operating Temperature Range:

More information

DC/DC Converter K78_T-500R3 Series

DC/DC Converter K78_T-500R3 Series Wide input voltage Non-isolated and Regulated Single Output RoHS FEATURES High efficiency up to 95% No-load input current as low as 0.2mA Operating ambient temperature range -40 to +85 Output short-circuit

More information

S24SE/S24DE series 15W Single/Dual Output DC/DC Converter

S24SE/S24DE series 15W Single/Dual Output DC/DC Converter FEATURES Efficiency up to 89% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: 25.4 x25.4 x10.2mm (1.0 x1.0 x0.40 )(No HSK) Over voltage protection, hiccup mode Over current

More information

DC/DC Converter 9 to 36Vdc and 18 to 75Vdc input voltage, 20 Watt Output Power; 3.3 to 15Vdc Single Output and ±12Vdc to ±15Vdc Dual Output

DC/DC Converter 9 to 36Vdc and 18 to 75Vdc input voltage, 20 Watt Output Power; 3.3 to 15Vdc Single Output and ±12Vdc to ±15Vdc Dual Output THN 20WI Series Application Note DC/DC Converter 9 to 36Vdc and 18 to 75Vdc input voltage, 20 Watt Output Power; 3.3 to 15Vdc Single Output and ±12Vdc to ±15Vdc Dual Output Pending Applications Wireless

More information

MI2500RU. Series. Compact, 1 x 1 Inch 25W, 4:1 Input Range DC/DC Con vert ers. Key Features: Electrical Specifications

MI2500RU. Series. Compact, 1 x 1 Inch 25W, 4:1 Input Range DC/DC Con vert ers.   Key Features: Electrical Specifications MI2500RU Compact, 1 x 1 Inch 25W, 4:1 Input Range DC/DC Con vert ers Electrical Specifications Key Features: 25W Output Power 4:1 Input Voltage Range Compact 1 x 1 Inch Case 1,500 VDC Isolation 12 Standard

More information

WRA_CKS-1W & WRB_CKS-1W Series 1W, WIDE INPUT, ISOLATED & REGULATED DUAL/SINGLE OUTPUT SIP DC-DC CONVERTER

WRA_CKS-1W & WRB_CKS-1W Series 1W, WIDE INPUT, ISOLATED & REGULATED DUAL/SINGLE OUTPUT SIP DC-DC CONVERTER WRA_CKS-W & WRB_CKS-W Series W, WIDE INPUT, ISOLATED & REGULATED DUAL/SINGLE OUTPUT SIP DC-DC CONVERTER FEATURES 2: wide input range 500VDC Isolation Short circuit protection (automatic recovery) Remote

More information

SELECTION GUIDE. Nominal Input Voltage. Output Voltage

SELECTION GUIDE. Nominal Input Voltage. Output Voltage MTE1 Series SELECTION GUIDE FEATURES Single isolated output 1kVDC Isolation Efficiency up to 88% Power density 1.8W/cm 3 Wide temperature performance at full 1 Watt load, 4 C to 85 C UL 94V- Package material

More information

AEE15W-M Series. Product Descriptions. 15 Watts

AEE15W-M Series. Product Descriptions. 15 Watts AEE15WM Series 15 Watts DC/DC Converter AEE15WM Series Page 1 Total Power: 15 Watts Input Voltage: 9 to 18 18 to 36 36 to 75 # of Outputs: Single, Dual Special Features 4200 VAC reinforced insulation Insulation

More information

COTS EMI FILTER -500V

COTS EMI FILTER -500V Passive Filter Half-Brick MILITARY COTS EMI FILTER -500V to +500V 9A 80mΩ @ 100 C >80dB @ 250kHz Continuous Input Output Current Max. DC Resistance Differential Attenuation FULL POWER OPERATION: -55ºC

More information

One part that covers many applications Reduces board space, system cost and complexity, and time to market. North America

One part that covers many applications Reduces board space, system cost and complexity, and time to market. North America Bel Power Solutions point-of-load converters are recommended for use with regulated bus converters in an Intermediate Bus Architecture (IBA). The YEV09T, non-isolated DC-DC point of load (POL) converter,

More information

9 to 36 Vdc and 18 to 75 Vdc input, 3.3 to 15 Vdc Single Output, 40W. Features

9 to 36 Vdc and 18 to 75 Vdc input, 3.3 to 15 Vdc Single Output, 40W. Features PXF40xxWSxx Single Output DC/DC Converter 9 to 36 Vdc and 18 to 75 Vdc input, 3.3 to 15 Vdc Single Output, 40W Features Single output current up to 10A 40 watts maximum output power 4:1 ultra wide input

More information

MTE1 Series Isolated 1W Single Output SM DC/DC Converters

MTE1 Series Isolated 1W Single Output SM DC/DC Converters MTE1 Series SELECTION GUIDE FEATURES Single isolated output 1kVDC Isolation Hi Pot Test Typical efficiency 86% Wide temperature performance at full 1 Watt load, 4 C to 85 C UL 69 recognised 3.3V, 5V, 12V,

More information

http://www.mmtmachrone.com 93D SERIES FEATURES: 60W DIL PACKAGE INDUSTRY STANDARD PACKAGE 2:1 WIDE INPUT RANGE 100% BURNED IN HIGH EFFICIENCY UL94V-0 PACKAGE MATERIAL CUSTOM SOLUTIONS AVAILABLE RoHS COMPLIANT

More information

Output Full Load

Output Full Load SERIES DC-DC CONVERTER 2:1 & 4:1 WIDE INPUT RANGE UP TO 3.3 WATTS FEATURES REINFORCED INSULATION FOR 2VAC WORKING VOLTAGE CLEARANCE AND CREEPAGE DISTANCE :8.0mm/2MOPP 00VAC INPUT TO OUTPUT 2MOPP ISOLATION

More information

Series AM30EW-Z 30 Watt DC-DC Converter

Series AM30EW-Z 30 Watt DC-DC Converter EATURES: Models Single output Model Input Voltage Ultra Wide 4:1 input range Remote on/off control Efficiency up to 91% Input/ Isolation 1600VDC Soft start Operating temperature -40ºC to + 75ºC Continuous

More information

Note1: Max. capacitive load is tested at nominal input and constant resistive load. RI3- _/_ Isolation (2) Single

Note1: Max. capacitive load is tested at nominal input and constant resistive load. RI3- _/_ Isolation (2) Single Features Unregulated Converters 3 Watt in a SIP4 Package -3kVDC Isolation Efficiency up to 9% -4 C to + C Operating Temperature Range IEC/EN/UL69 (Pending) CB Report (Pending) Industry Standard Pinout

More information

DC/DC Converter WRB_MT-3W Series

DC/DC Converter WRB_MT-3W Series 3W, Wide input voltage, isolated & regulated single output DC/DC converter Patent Protection RoHS FEATURES Compact size, SMD Package High efficiency up to 80% Wide input voltage range (2:1) Operating temperature

More information

Series AM2L-NZ 2 Watt DC-DC Converter

Series AM2L-NZ 2 Watt DC-DC Converter FEATURES: Series AM2-NZ 2 Watt - Converter s Single output ow Profile SMD (Surface Mount Device) MTBF>1,000,000 hours 1000V & 6000V Isolation Operating temperature: -40 C to 85 C Industry Standard Pinout

More information

Packaging. nom. Output Voltage

Packaging. nom. Output Voltage Features Unregulated Converters 1W Power in SMD package Pin compatible with R1S series -40 C to +100 C operating temperature @ full load High 3kVDC/1 second or 1kVDC/1 second isolation IEC/EN/UL62368-1

More information

IF_S-1W & IF_D-1W Series 1W isolated DC-DC converter with Fixed Input Voltage and Regulated Single Output

IF_S-1W & IF_D-1W Series 1W isolated DC-DC converter with Fixed Input Voltage and Regulated Single Output IF_S-1W & IF_D-1W Series 1W isolated - converter with Fixed Input Voltage and Regulated Single Output FEATURES Compact size SIP/DIP Package I/O isolation test voltage 3k V Operating ambient temperature

More information

ISOLATED DC-DC Converter EC1SAN SERIES APPLICATION NOTE

ISOLATED DC-DC Converter EC1SAN SERIES APPLICATION NOTE ISOLATED DC-DC Converter EC1SAN SERIES APPLICATION NOTE Approved By: Department Approved By Checked By Reported By Enoch Eunice Joyce Research and Development Department Danny Jack Benny Engineering Department

More information

S24SE/S24DE series 30W Single/Dual Output DC/DC Converter

S24SE/S24DE series 30W Single/Dual Output DC/DC Converter Model List Model Number Input Voltage Output Voltage Output Current Input Current (typ input voltage) (Range) Max. Min. @Max. Load @No Load Load Regulation Maxcapacitive Efficiency Load (typ.) @Max. Load

More information

DC/DC Converter WRF_MT-3W Series

DC/DC Converter WRF_MT-3W Series 3W, Wide input voltage, isolated & regulated single output DC/DC converter FEATURES Patent Protection RoHS Remote On/Off WRF_MT-3W series are isolated 3W DC-DC products with 2:1 input voltage. They feature

More information

MTE1 Series Isolated 1W Single Output SM DC/DC Converters

MTE1 Series Isolated 1W Single Output SM DC/DC Converters MTE1 Series SELECTION GUIDE FEATURES Single isolated output 1kVDC Isolation Typical efficiency 86% Wide temperature performance at full 1 Watt load, 4 C to 85 C UL 94V- Package material 3.3V, 5V, 12V,

More information

ISOLATED DC-DC Converter EC1TAN SERIES APPLICATION NOTE

ISOLATED DC-DC Converter EC1TAN SERIES APPLICATION NOTE ISOLATED DC-DC Converter EC1TAN SERIES APPLICATION NOTE Approved By: Department Approved By Checked By Reported By Enoch Danny Joyce Research and Development Department Jacky Jack Benny Engineering Department

More information

Types MCM and MIN SMT Clad RF Capacitors

Types MCM and MIN SMT Clad RF Capacitors Multilayer High Power, High Temperature Mica and PTFE Capacitors Specifications Complies with the EU Directive 2002/95/EC requirement restricting the use of Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent

More information

Features. Regulated Converters. RS6 6 Watt. SIP8 Single and Dual Output. DC/DC Converter. Description. Selection Guide

Features. Regulated Converters. RS6 6 Watt. SIP8 Single and Dual Output. DC/DC Converter. Description. Selection Guide Features Regulated Converters Description Highest Power Density In SIP Package 1.6kVDC/1 Minute Isolation Efficiency Up To 88% -4 C To +75 C Operating Temperature Range @ Full Load EN695 And UL/EN62368-1

More information

DC/DC Converter URB_J(M)D/T-15W Series

DC/DC Converter URB_J(M)D/T-15W Series 15W isolated DC-DC converter in DIP/SMD package, Ultra-wide input & regulated single output FEATURES Ultra-wide 4:1 input voltage range High efficiency up to 89% No-load power consumption as low as 0.36W

More information

1000 WATT FXP SERIES DC/DC CONVERTERS

1000 WATT FXP SERIES DC/DC CONVERTERS Description The 4:1 Input Voltage 1000 Watt Single FXP DC/DC converter provides a regulated dc output with capability for paralleling up to three converters delivering up to 2.8kW. Current sharing among

More information

ISOLATED DC-DC Converter EC2SA SERIES APPLICATION NOTE

ISOLATED DC-DC Converter EC2SA SERIES APPLICATION NOTE ISOLATED DC-DC Converter EC2SA SERIES APPLICATION NOTE Approved By: Department Approved By Checked By Reported By Enoch Danny Joyce Research and Development Department Jack Benny Quality Assurance Department

More information

URA_(X)D-10WR2& URB_(X)D-10WR2 Series 10W,ULTRA-WIDE INPUT ISOLATED& REGULATED DUAL/SINGLE OUTPUT DIP PACKAGING, DC-DC CONVERTER

URA_(X)D-10WR2& URB_(X)D-10WR2 Series 10W,ULTRA-WIDE INPUT ISOLATED& REGULATED DUAL/SINGLE OUTPUT DIP PACKAGING, DC-DC CONVERTER URA_(X)D-0WR& URB_(X)D-0WR Series 0W,ULTRA-WIDE INPUT ISOLATED& REGULATED DUAL/SINGLE OUTPUT DIP PACKAGING, - CONVERTER Patent Protection RoHS PART NUMBER SYSTEM URB405(X)D-0WR Rated Power Package Style

More information

VRB_D-40W SERIES 40W, WIDE INPUT, ISOLATED & REGULATED SINGLE OUTPUT DC-DC CONVERTER

VRB_D-40W SERIES 40W, WIDE INPUT, ISOLATED & REGULATED SINGLE OUTPUT DC-DC CONVERTER VRB_D-40W SERIES 40W, WIDE INPUT, ISOLATED & REGULATED SINGLE OUTPUT - CONVERTER PART NUMBER SYSTEM VRB45D-40W SELECTION GUIDE Model Number Patent Protection RoHS Rated Power Package Style Output Voltage

More information

FED30-48 S 05 - N HC Series Name Input Output Output Remote Control Assembly Option Voltage Quantity Voltage Option PART NUMBER STRUCTURE

FED30-48 S 05 - N HC Series Name Input Output Output Remote Control Assembly Option Voltage Quantity Voltage Option PART NUMBER STRUCTURE Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE FED30-48 S 05 - N HC Series Name Input Output Output Remote Control Assembly Option

More information

DC/DC Converter WRA_ZP-3WR2 & WRB_ZP-3WR2 Series

DC/DC Converter WRA_ZP-3WR2 & WRB_ZP-3WR2 Series DC/DC Converter 3W,wide input isolated & regulated dual / single output DC-DC converter FEATURES Wide input voltage range (2:1) High efficiency up to 86% Isolation voltage 1.KVDC Output short circuit protection(automatic

More information

Voltage Setpoint Accuracy +/-2% max Input Voltage Range 2:1 3:1 4:1 Input Range. +/-0.5% max GENERAL SPECIFICATIONS

Voltage Setpoint Accuracy +/-2% max Input Voltage Range 2:1 3:1 4:1 Input Range. +/-0.5% max GENERAL SPECIFICATIONS FEATURES W DIL PACKAGE INDUSTRY STANDARD PACKAGE 9-8V,8-6V,6-7V,9-7V,8-V, 9-6V,8-7V WIDE RANGE NO EXTERNAL COMPONENTS REQUIRED REGULATED 00% BURN IN HIGH EFFICIENCY UL 9V-0 PACKAGE MATERIAL CUSTOM SOLUTIONS

More information

DC/DC Converter VRA_YMD-6WR3 & VRB_YMD-6WR3 Series

DC/DC Converter VRA_YMD-6WR3 & VRB_YMD-6WR3 Series 6W isolated - converter in YMD package Wide input voltage and regulated dual/single output CB Patent Protection RoHS FEATURES Wide 2:1 input voltage range High efficiency up to 88% No-load power consumption

More information

FED30-48 S 05 W - N HC Series Name Input Output Output Input Remote Control Assembly Option Voltage Quantity Voltage Range Option

FED30-48 S 05 W - N HC Series Name Input Output Output Input Remote Control Assembly Option Voltage Quantity Voltage Range Option Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE FED30-48 S 05 W - N HC Series Name Input Output Output Input Remote Control Assembly

More information

Series AM30EW-Z 30 Watt DC-DC Converter

Series AM30EW-Z 30 Watt DC-DC Converter FEATURES: Click on Series name for product info on aimtec.com Models Single output Model Input Voltage Ultra Wide :1 input range Remote on/off control Efficiency up to 91% Input/ Isolation 100VDC Soft

More information

S24SP12004 series 40W Single Output DC/DC Converter

S24SP12004 series 40W Single Output DC/DC Converter FEATURES Efficiency up to 92.8% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: Without heat sink 5.8 x25.4 x1.5mm (2. x1. x.41 ) With heat sink 5.8 x25.4 x17.5mm (2.

More information

Notes: Note3: without suffix, standard isolation voltage (1kVDC/1 second) with suffix /H, high isolation voltage (3kVDC/1 second)

Notes: Note3: without suffix, standard isolation voltage (1kVDC/1 second) with suffix /H, high isolation voltage (3kVDC/1 second) Features Unregulated Converters Description 1W Power In SMD Package Pin Compatible With R1S -4 C To +1 C Operating Temperature @ Full Load high 3kVDC/1 Second or 1kVDC/1 Second Isolation IEC/EN/UL62368-1

More information

S24SP05012 series 60W Single Output DC/DC Converter

S24SP05012 series 60W Single Output DC/DC Converter Model List Model Number S24SP05012 Input Voltage (Range) Output Voltage Output Current Input Current (typ input voltage) Load Regulation Maxcapacitive Load (Cap ESR>=10mohm;Full Efficiency load;5%overshoot

More information

S24SP24003 series 60W Single Output DC/DC Converter

S24SP24003 series 60W Single Output DC/DC Converter FEATURES Efficiency up to 93% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: Without heat sink 5.8 x25.4 x1.5mm (2. x1. x.41 ) With heat sink 5.8 x25.4 x17.5mm (2. x1.

More information

DC/DC Converter K78xx-500R2 Series

DC/DC Converter K78xx-500R2 Series Converter K78xx-5R Series Wide input voltage, non-isolated & regulated single output Patent Protection RoHS FEATURES Efficiency up to 96% Operating temperature range: -4 to + Low ripple & noise Supporting

More information

SELECTION GUIDE - SINGLE OUTPUT 1. Nominal Input Voltage Output Voltage

SELECTION GUIDE - SINGLE OUTPUT 1. Nominal Input Voltage Output Voltage www.murata-ps.com MEV1 Series SELECTION GUIDE - SINGLE OUTPUT 1 Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Load Regulation (Typ) Load Regulation (Max) Ripple

More information

500 ma DC-DC Step Down Converter P78G-Series

500 ma DC-DC Step Down Converter P78G-Series 500 ma DC-DC Step Down Converter -Series Pin compatible to linear 78xx regulator (TO-220) Not isolated Efficiency up to 95 % Input voltage range up to 6 V Positive or negative output voltage possible Operating

More information

YEV09T06 6A DC-DC POL Converter 4.5V to 13.8V Input 0.59V to 5.1V Output Data Sheet

YEV09T06 6A DC-DC POL Converter 4.5V to 13.8V Input 0.59V to 5.1V Output Data Sheet Member of the Family Applications Low voltage, high density systems with Intermediate Bus Architectures (IBA) Point-of-load regulators for high performance DSP, FPGA, ASIC, and microprocessors Desktops,

More information

FCW SERIES 15W WIDE INPUT RANGE

FCW SERIES 15W WIDE INPUT RANGE FCW SERIES 15W WIDE RANGE FEATURES 15W DIL PACKAGE INDUSTRY STANDARD PACKAGE 9-18V,18-36V,36-72V,9-36V,18-72V WIDE RANGE REGULATED 100% BURN IN UL 94V-0 PACKAGE MATERIAL CUSTOM SOLUTIONS AVAILABLE RoHS

More information

15 W DC/DC CONVERTERS. SERIES DESCRIPTION Page. PC15WR 2:1 Input Range 2 2 x 1 Metal Can Package 2kv Isolation

15 W DC/DC CONVERTERS. SERIES DESCRIPTION Page. PC15WR 2:1 Input Range 2 2 x 1 Metal Can Package 2kv Isolation 15 W DC/DC CONVERTERS SERIES DESCRIPTION Page PC15WR 2:1 Input Range 2 2 x 1 Metal Can Package 2kv Isolation PC15WR4 4:1 Input Range 6 2 x 1 Metal Can Package 2kv Isolation CTC TECHNOLOGY CO.,LTD. DC /

More information

MTC1 Series Isolated 1W SM 2:1 Input Single Output DC-DC Converters

MTC1 Series Isolated 1W SM 2:1 Input Single Output DC-DC Converters MTC1 Series SELECTION GUIDE FEATURES UL 95 recognised for reinforced insulation ANSI/AAMI ES1-1, 1 MOPP/ 2 MOOPs recognised 3kVAC isolation test voltage Hi Pot Test Continuous short circuit protection

More information

VRA_LD-15WR2 & VRB_LD-15WR2 SERIES 15W,WIDE INPUT, ISOLATED & REGULATED DUAL/SINGLE OUTPUT DC-DC CONVERTER

VRA_LD-15WR2 & VRB_LD-15WR2 SERIES 15W,WIDE INPUT, ISOLATED & REGULATED DUAL/SINGLE OUTPUT DC-DC CONVERTER VRA_LD-5WR & VRB_LD-5WR SERIES 5W,WIDE INPUT, ISOLATED & REGULATED DUAL/SINGLE OUTPUT - CONVERTER PART NUMBER SYSTEM VRB5LD-5WR SELECTION GUIDE Model Number Rated Power Package Style Output Voltage Input

More information

E Class Converters. EHS20 1.2V Model. Technical enquiries tel:

E Class Converters. EHS20 1.2V Model.   Technical enquiries   tel: Model 1.2V Units Parameter Output Voltage Setpoint 1.18 1.22 Vdc Line/Load Regulation Max 0.1% / 0.2% % Vo Output total regulation 1.16 1.24 Vdc Output adjust (note 4) 90-110 %Vo,nom Remote-sense Comp.

More information

Cool Power Technologies

Cool Power Technologies Cool Power Technologies Sixteenth-Brick Isolated DC/DC Converter Features Industry-standard pinout Wide input voltage range: 36 75Vin Output: 3.3 V at 12 A, 40W max. No minimum load required Low height

More information

1000 WATT FXW SERIES DC/DC CONVERTERS

1000 WATT FXW SERIES DC/DC CONVERTERS Features Description The 4:1 Input Voltage 1000 Watt Single FXW DC/DC converter provides a precisely regulated dc output. The output voltage is fully isolated from the input, allowing the output to be

More information

Notes: Note1: Max. capacitive load is tested at nominal input voltage and full load. Single or Dual

Notes: Note1: Max. capacitive load is tested at nominal input voltage and full load. Single or Dual Features Regulated Converters Description 6-Side Shielding External ON/OFF control 1.6kV Isolation UL/CSA/EN-695-1 Certified 2:1 Input Voltage Range Continuous Short Circuit Protection Efficiency up to

More information

Output Current Load ±5 ±100 ± ±5 ±100 ± Item Test Conditions Min. Typ. Max. Unit

Output Current Load ±5 ±100 ± ±5 ±100 ± Item Test Conditions Min. Typ. Max. Unit DAZ_XT1P Series 1W,FIXED INPUT, ISOLATED & UNULATED DUAL OUTPUT PART NUMBER SYSTEM DAZ-5-XT1P Rated Power Package Output Voltage Input Voltage Product Series FEATURES Ultra-Miniature SMD package 1VDC isolation

More information