Mini Wideband Transformers WBC
|
|
|
- Jeffrey Boone
- 5 years ago
- Views:
Transcription
1 Document - Mini Wideband Transformers WBC Smallest wideband transformer: mm square mm high Vrms interwinding isolation, / Watt RF input power ma max current rating. Designer s Kit C contains three of each part Core material Ferrite Terminations RoHS compliant tin-silver-copper over silver-platinum-glass frit. Other terminations available at additional cost. Weight mg Ambient temperature C to +8 C Storage temperature Component: C to +8 C. Tape and reel packaging: C to +8 C Resistance to soldering heat Max three second reflows at + C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) (unlimited floor life at < C / 8% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) per billion hours /,,7 hours, calculated per Telcordia SR- Packaging 7/7 reel; / reel Plastic tape: mm wide,. mm thick, 8 mm pocket spacing,. mm pocket depth PCB washing Only pure water or alcohol recommended Impedance Insertion Pins (primary) Pins (secondary) DC Part ratio Bandwidth loss max L min DCR max L min DCR max imbalance Color number Schematic pri : sec (MHz) () (µh) (mohm) (µh) (mohm) max (ma) dot WBC-L_ A :.. Brown WBC-TL_ B : Brown WBC-TL_ B :.. 8. Red WBC-TL_ B : Orange WBC-TL_ B :. 7. Yellow WBC-L_ B :.. 8 Green WBC-WL_ B :.. 8 White WBC-TL_ B : Blue WBC8-L_ B : Gray WBC-L_ B : White WBC-TL_ B : Violet WBC-L_ C :. 8. Yellow. When ordering, please specify termination and packaging codes: WBC-LC Termination: L = RoHS compliant tin-silver-copper (.//.) over silverpalladium-platinum Special order: S = non-rohs tin-lead (/7). Packaging: C = 7 machine-ready reel. EIA-8 embossed plastic tape (7 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($ charge), use code letter C instead. D = machine-ready reel. EIA-8 embossed plastic tape. Factory order only, not stocked ( parts per full reel).. Impedance ratio is for the full primary winding to the full secondary winding.. Inductance measured at khz,. V, Adc on an Agilent/HP or equivalent.. DCR measured on a micro-ohmmeter.. DC imbalance is the maximum difference in current measured at pins and with the source at pin. Inductance drop is % at maximum imbalance.. Electrical specifications at C. Measurements are referenced to Ohms. Refer to Doc Soldering Surface Mount Components before soldering. Schematics A B C Sec Sec Sec US sales@coilcraft.com UK +--7 sales@coilcraft-europe.com Taiwan sales@coilcraft.com.tw China sales@coilcraft.com.cn Singapore sales@coilcraft.com.sg Document - Revised 7// Coilcraft Inc.
2 Document - Dimensions Dot indicates pin.7, max. max,., max.*,8.,7.,.,.,.*,8., * Nominal dimensions of the substrate Recommended Land Pattern.,7., Dimensions are in inches mm US sales@coilcraft.com UK +--7 sales@coilcraft-europe.com Taiwan sales@coilcraft.com.tw China sales@coilcraft.com.cn Singapore sales@coilcraft.com.sg Document - Revised 7// Coilcraft Inc.
3 Document - Attenuation () WBC-L bandwidth:. MHz.. WBC-L Magnitude imbalance Attenuation () WBC-TL bandwidth:. 7 MHz.. WBC-TL Magnitude imbalance Attenuation () WBC-TL bandwidth:. MHz.. WBC-TL Magnitude imbalance Attenuation () WBC-TL bandwidth:. MHz.. WBC-TL Magnitude imbalance Attenuation measured on a network analyzer (re: Ohms) US sales@coilcraft.com UK +--7 sales@coilcraft-europe.com Taiwan sales@coilcraft.com.tw China sales@coilcraft.com.cn Singapore sales@coilcraft.com.sg Document - Revised 7// Coilcraft Inc.
4 Document - Attenuation () WBC-TL bandwidth:. 7 MHz.. WBC-TL Magnitude imbalance Attenuation () WBC-L bandwidth:. MHz.. WBC-L Magnitude imbalance Attenuation () WBC-WL bandwidth:. MHz.. WBC-WL Magnitude imbalance Attenuation () WBC-TL bandwidth:. 7 MHz.. WBC-TL Magnitude imbalance Attenuation measured on a network analyzer (re: Ohms) US sales@coilcraft.com UK +--7 sales@coilcraft-europe.com Taiwan sales@coilcraft.com.tw China sales@coilcraft.com.cn Singapore sales@coilcraft.com.sg Document - Revised 7// Coilcraft Inc.
5 Document - Attenuation () WBC8-L bandwidth:. MHz.. WBC8-L Magnitude imbalance Attenuation () WBC-L bandwidth:. MHz.. WBC-L Magnitude imbalance Attenuation () WBC-TL bandwidth:. MHz.. WBC-TL Magnitude imbalance Attenuation () WBC-L bandwidth:. 8 MHz.. WBC-L Magnitude imbalance Attenuation measured on a network analyzer (re: Ohms) US sales@coilcraft.com UK +--7 sales@coilcraft-europe.com Taiwan sales@coilcraft.com.tw China sales@coilcraft.com.cn Singapore sales@coilcraft.com.sg Document - Revised 7// Coilcraft Inc.
Wideband Transformers
Document - Wideband Transformers Surface mount and through hole versions Vrms, minute interwinding isolation (hipot), / Watt RF input power ma current rating. For a smaller package size, see our WBC Series
Surface Mount Wideband RF
Document 9- Surface Mount Wideband RF Tapped and untapped versions V interwinding isolation, / Watt RF input power ma max current rating. Typical Frequency Response Part db db db number (MHz) (MHz) (MHz)
Common Mode Chokes BU Series
Document 60- Common Mode Chokes BU Series These low cost, high performance choke coils are designed to virtually eliminate line conducted common mode noise. The BU9S and BU9HS families are ideal for signal
HP1, HPH1 HP2, HPH2 HP3, HPH3 HP4, HPH4 HP5, HPH5 HP6, HPH6. Winding Layout. Middle 11. Inner
Document - HP, HPH HP, HPH HP, HPH HP, HPH HP, HPH HP, HPH Six : isolated windings that can be connected in series or parallel Tightly coupled windings Power range: 0 Watts as inductor and flyback transformer;
HCV1605 High current power inductors
Technical Data 188 High current power inductors pplications Compatible with Picor Cool-Power ZVS Buck and Buck-Boost Regulator Families Environmental data Storage temperature range (Component): -55 C to
VI TELEFILTER Filter specification TFS 248F 1/5
VI TELEFILTER Filter specification TFS 248F 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 200 Ω Characteristics Remark: The reference
Vectron International Resonator Specification TFR 832 1/5
Vectron International Resonator Specification TFR 832 1/5 Measurement condition Ambient temperature: 25 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:
Planar Transformer Prototyping Kit. Designer s Kit C356
Planar Transformer Prototyping Kit Designer s Kit C Contents Introduction... Kit Contents... Part Details... Core... Primary Boards... Secondary Stamps... Auxiliary Boards... Pins and Insulators... Designing
HCV1707 High current power inductors
Technical Data 10712 High current power inductors Applications Compatible with Picor Cool-Power ZVS Buck and Buck-Boost Regulator Families Environmental data Storage temperature range (Component): -55
Chip Resistors / Chip Arrays
Chip Resistors / Chip Arrays w w w. b o u r n s. c o m I. CR Series Chip Resistors...92 II. CAT/CAY Series Chip Resistor Arrays...96 CAT/CAY 16 Series...96 CAY1 Chip Resistor Array...97 CAY17 Bussed Resistor
CCM Broadband Conical Inductor
Return Insertion CCM Broadband Conical Inductor Substrate Mounted For Chip & Applications Broadband performance to 40 Ghz Integrated 50Ω Microstrip Low Insertion Loss -.35 db Perfect for Bias Tee Applications
Vectron International Filter specification TFS 125P 1/5
Vectron International Filter specification TFS 125P 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 115 Ω -21 pf Output: 110 Ω -35 pf Characteristics
CMS Common mode inductors, surface mount
Effective October 215 Supersedes March 27 Common mode inductors, surface mount pplications EMI filters DC-DC brick power supplies Discrete output supplies Discrete and point-of-use power supplies (PUPS)
SMD High Frequency Power Inductor. Designed for VRD & VRM 10.x & 11.x Applications
Designed for VRD & VRM 1.x & 11.x Applications FEATURES Recommended for use with all major Voltage Regulator ICs High Current handling capability in the smallest footprint Up to 2MHz operating frequency
IWHQSeries FEATURES ORDERING CODE. SMD Wirewound Open-Type Chip Inductors (High Q /Frequency) 0805 TRIGON COMPONENTS
CONFIGURATIONS: FEATURES Low DC resistance design is ideal for low loss, high output and low power consumption. Especially high Q factor in this series for customer s design. Resin-coated surface enables
VI TELEFILTER Filter specification TFS 130C 1/5
VI TELEFILTER Filter specification TFS 130C 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 130 Ω -11.6 pf Output: 86 Ω -11.8 pf Characteristics
Vectron International Temperatur sensor specification TFSS434B 1/6
Vectron International Temperatur sensor specification TFSS434B 1/6 Measurement condition Ambient temperature: 85 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics
Vectron International Filter specification TFS 243E 1/5
Vectron International Filter specification TFS 243E /5 Measurement condition Ambient temperature T A: 23 C Input power level: 0 dbm Terminating impedance: * Input: 350 Ω -3.8 pf Output: 350 Ω -3.8 pf Characteristics
Shielded Power Inductors
Shielded Power Inductors MN509 Shielded inductor with minimum EMI Minimum power loss Non standard values available Low DC resistance Flat top for SMT operations Specifications Inductance tested at 100KHz
Vectron International Filter specification TFS246R 1/5
Vectron International Filter specification TFS26R 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedances*): input: 695 Ω -1.9 pf output: 695 Ω -1.9 pf Characteristics
Vectron International Filter specification TFS 600 1/5
Vectron International Filter specification TFS 600 /5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 270 Ω -0,8 pf Output: 285 Ω -0,8 pf Characteristics
SMD High Frequency Power Inductor. Designed for Utility Regulator Applications
FEATURES Recommended for use with all major Voltage Regulator ICs High Current handling capability in the smallest footprint Up to 2MHz operating frequency Extended operating temperature range: -4C to
3dB HYBRID COUPLER. Amplitude Balance db (max) ± ± to +85
FEATURES High Power Low Profile Surface Mount Package Very Low Insertion Loss Excellent Amplitude and Phase Balance High Isolation RoHS Tape and Reel for High Volume Production APPLICATIONS Power Amplifiers
Vectron International Temperatur sensor specification TFSS433D 1/6
Vectron International Temperatur sensor specification TFSS433D 1/6 Measurement condition Ambient temperature: 85 C Input power level: 0 dbm Terminating impedance: Input: 50 Output: 50 Characteristics Remark:
Vectron International Filter specification TFS1220 1/5
Vectron International Filter specification TFS1220 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 146 Ω -0.9 pf Output: 146 Ω -0.9 pf Characteristics
Features wide bandwidth 10 to 3000 MHz balanced transmission line excellent return loss aqueous washable patent pending
Surface Mount top hat RF Transformer 50Ω 10 to 3000 MHz Maximum Ratings Operating Temperature -40 C to 85 C Storage Temperature -55 C to 100 C RF Power 0.4W DC Current 30mA Permanent damage may occur if
CLB1108 Multi-phase power inductors
Multi-phase power inductors Supersedes December 2013 Applications For exclusive use with Volterra or Maxim VPR-Devices Environmental Data Storage temperature range (component): -40 C to +125 C Operating
CL1208 Multi-phase power inductors
Technical Data 1579 Effective December 216 CL128 Multi-phase power inductors Applications For exclusive use with Maxim Multi-phase controllers Voltage Regulator Modules (VRMs) and high power density VRMs
Vectron International Filter specification TFS /5
Vectron International Filter specification TFS 1795 1/5 Measurement condition Ambient temperature: 2 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The maximum
Vectron International Filter specification TFS 868P 1/5
Vectron International Filter specification TFS 868P 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 80 Ω -1.7 pf Output: 80 Ω -1.7 pf Characteristics
Vectron International Filter specification TFS 400L 1/5
Vectron International Filter specification TFS 400L 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 200 Ω Output: 200 Ω Characteristics Remark:
RF Transformer TCM2-672X+ Surface Mount. 50Ω 1700 to 6700 MHz
Surface Mount top hat RF Transformer 50Ω 1700 to 6700 MHz The Big Deal Wideband, 1700 to 6700 MHz Low insertion loss, 1.1 db Flat insertion loss, ±0.4 db typ. Good input return loss, 12 to 31 db typ. Low
Top View (Near-side) Side View Bottom View (Far-side) ± ±.08. 4x.28. Orientation Marker Balanced port 1.
Model BD2FAHF Ultra Low Profile 168 Balun Ω to Ω Balanced Description The BD2FAHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential input locations on data conversion
VI TELEFILTER Filter specification TFS /5
VI TELEFILTER Filter specification TFS 2100 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark: The maximum
MTE1 Series Isolated 1W Single Output SM DC/DC Converters
MTE1 Series SELECTION GUIDE FEATURES Single isolated output 1kVDC Isolation Typical efficiency 86% Wide temperature performance at full 1 Watt load, 4 C to 85 C UL 94V- Package material 3.3V, 5V, 12V,
Chip Inductor INTRODUCTION FEATURE AND APPLICATION. Feature. Application
INTRODUCTION Multilayer Chip Inductor is an electronic part that uses in resonance circuit, for noise suppression and for impedance matching in the electrical circuit. SAMSUNG Electro-mechanics has 2 series
INPAQ. Specification. WIP201610S L Series. Product Name. Power Inductor. Global RF/Component Solutions
WIP201610S L Series Specification Product Name Series Power Inductor WIP201610S L Series Size EIAJ 2016 WIP201610S L Series Engineering Specification 1. Scope Feature High saturation current realized by
FP1309B High frequency, high current power inductors
Technical Data 10477 High frequency, high current power inductors Applications Servers Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) Server and desktop Central processing unit (CPU)
Tfs248e.doc version VI TELEFILTER Filter specification TFS 248 E 1/5. D a t a typ. Value Limit
Filter specification TFS 248 E 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedances at f c *) Input: 560 Ω -5.9pF Characteristics Output: 500 Ω -6.3 pf Remark:
Electrical Specifications. Insertion to +85 TOP VIEW SIDE VIEW BOTTOM VIEW. Pin 2. Yantel Corporation
Description The is a low profile, high performance 20dB directional coupler. It is designed for DCS & PCS applications. This component is suitable for feed-forward amplifier and signal sampling circuits
1 GHz capable, 3 W carrying power (at 1 GHz), 50Ω impedance and 2 Form C relays
1 GHz capable, 3 W carrying power (at 1 GHz), 5Ω impedance and 2 Form C relays RA RELAYS (ARA) 9.7 14.7.382.579 5.9.232 mm inch RoHS compliant Protective construction: Sealed type ORDERING INFORMATION
VI TELEFILTER Filter Specification TFS 211 C 1/5
Filename: tfs211c.doc version 3.0 23.01.2002 Filter Specification TFS 211 C 1/5 Measurement condition Ambient temperature: 20... 25 C Input power level: 5 ± 2 dbm terminating impedances * Input: 1,1 kω
SMT Ferrite Chip Inductor SFI201212S Series
Part : SFI201212S SERIES Version : AD Page : 1 / 7 Feature SMT Ferrite Chip Inductor SFI201212S Series Utilizing a miniaturized winding structure. These products provide high Q characteristics. Resin coated
- 01dB = 1dB, - 02dB = 2dB, - 03dB = 3dB, - 04dB = 4dB, - 05dB = 5dB, - 06dB = 6dB, - 07dB = 7dB, - 08dB = 8dB, - 09dB = 9dB, - 10dB = 10dB
AT02M0.09 - Page 1 of 13 Product Family: Part Number Series: Temperature Variable Attenuators ATV112F Series Construction: High purity Alumina Substrate Thermo-sensitive thermistor Ni alloy thin-film resistive
VI TELEFILTER Filter specification TFS 915D 1/5
Filter specification TFS 915D 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark: The maximum attenuation
(TREC) Wire Wound RF Chip Inductor
Version: February 21, 2017 (TREC) Wire Wound RF Chip Inductor Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District, New
Vectron International Filter specification TFS 737 1/5
Vectron International Filter specification TFS 737 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark: The
Vectron International Filter specification TFS 400P 1/5
Vectron International Filter specification TFS 400P /5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 280 Ω -6, pf Output: 440 Ω -5,2 pf Characteristics
Vectron International Filter specification TFS /5
Vectron International Filter specification TFS 1960 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:
TT9 SMT Series. Attenuator Chip 500 Milliwatts
Attenuator Chip 500 Milliwatts TT9 SMT Series Attenuator Chip 500 Milliwatts TT9 SMT Series, specifically designed for surface mount broadband applications which require more power. Smiths Interconnect
(TREM) High SRFs RF Inductor
Version: March 1, 2017 Electronics Tech. (TREM) High SRFs RF Inductor Web: www.direct-token.com Email: rfq@direct-token.com Direct Electronics Industry Co., Ltd. China: 12F, Zhong Xing Industry Bld., Chuang
discontinued October 31, 2017 or until inventory is
Supersedes June 2017 Applications Computer and portable power devices LCD panels, DVD players Inductor: DC-DC converters Buck, boost, forward, and resonant converters Noise filtering and filter chokes
Typical Performance 1. Absolute Maximum Ratings. Parameter
Device Features Typical Isolation = 23 db Typical Insertion Loss = 0.5 db MSL 3 moisture rating Lead-free/RoHS-compliant SOIC-8 Plastic Package With exposed back side ground pad Product Description BeRex
Model B0922N7575AHF Rev B. Ultra Low Profile 0404 Balun
Model B9N7575AHF Ultra Low Profile 44 Balun 75Ω to 75Ω Balanced Description The B9N7575AHF is a low profile, low impedance mm square subminiature wideband unbalanced to balanced transformer designed for
DR1050 Shielded power inductors
Shielded power inductors Supersedes March 2007 Applications LED/LCD backlighting High definition televisions (HDTV) Server and desktop power supplies Graphics cards and battery powered systems Point-of-load
Vectron International Filter specification TFS 121 1/5
Vectron International Filter specification TFS 121 1/ Measurement condition Ambient temperature: 23 Input power level: 0 dbm Terminating impedance: * Input: 130 Ω II 1,7 pf Output: 130 Ω II 1,7 pf Characteristics
ICL Series SMD Wirewound Chip Open-Type Inductors - ICL0603, ICL0805
SMD Wirewound Chip Open-Type s - ICL0603, ICL0805 CONFIGURATIONS: FEATURES Lower profile,high frequency Higher possible SRFs as well as excellent Q Value Higher current in compact size Customer design
Vectron International Filter specification TFS 500 1/5
Vectron International Filter specification TFS 500 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 415 Ω -1 pf Output: 415 Ω -1 pf External
ECONO-PAC /OCTA-PAC OCTA-PAC PLUS Power Inductors and Transformers
Description Surface mount magnetics that can be used as single or coupled inductors or 1:1 transformers that provide isolation between two windings OCTA-PAC s are designed around high frequency, low loss
FP2207R High frequency, high current power inductors
Technical Data 10673 High frequency, high current power inductors Applications Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) and highpower density VRMs Server and desktop Central processing
HCM1305. High current power inductors. Technical Data Applications. Environmental data. Product features
Supersedes June 2014 Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-load modules Desktop and server VRMs and EVRDs Base station equipment Notebook and laptop regulators Battery
Shielded Power Inductors TL1010SG Series
Form Rev- /5/ Shielded Power Inductors TLSG Series FEATURES Low DCR and excellent current handling Operating temperature range: C to +5 C with Irms current, +5 C to +5 C with derated current Storage temperature
DR1040 Shielded power inductors
Shielded power inductors Supersedes March 007 Applications LED/LCD backlighting High definition televisions (HDTV) Server and desktop power supplies Portable electronics Graphics cards and battery powered
Vectron International Filter specification TFS 1575AA 1/5
Vectron International Filter specification TFS 1575AA 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:
Typical Performance 1. Absolute Maximum Ratings. Parameter
Device Features Typical Isolation = 23 db Typical Insertion Loss = 0.4 db MSL 3 moisture rating Lead-free/RoHS-compliant SOIC-8 Plastic Package With exposed back side ground pad Product Description BeRex
Automotive grade Dual winding, high power density shielded drum core power inductors
Supersedes September 07 Dual winding, high power density shielded drum core power inductors Product features AEC-Q00 qualified Dual winding inductors that can be used as a single inductor, SEPIC, Flyback,
VI TELEFILTER Filter Specification TFS 246 H4 1/5
Filter Specification TFS 246 H4 1/5 Measurement condition Ambient temperature: 2 C Input power level: 0 dbm Terminating impedances *) Input: 490 Ω -2.62 pf Output: 490 Ω -2.62 pf External coil: 270 nh
March Thin-Film Directional Coupler. For MHz / MHz TFSC A1X. 0.65x0.5mm [EIA 0202]* * Dimensions Code JIS[EIA]
![March Thin-Film Directional Coupler. For MHz / MHz TFSC A1X. 0.65x0.5mm [EIA 0202]* * Dimensions Code JIS[EIA]](/thumbs/79/79990035.jpg "March Thin-Film Directional Coupler. For MHz / MHz TFSC A1X. 0.65x0.5mm [EIA 0202]* * Dimensions Code JIS[EIA]")
R F C o m p o n e n t s March 17 Thin-Film Directional Coupler For 2400-2500MHz / 4900-5850MHz 0.65x0.5mm [EIA 02]* * Dimensions Code JIS[EIA] Thin-Film Directional Coupler For 2400-2500MHz / 4900-5850MHz
Applications impedance matching balanced to unbalanced transformation push-pull amplifier. FREQUENCY (MHz) 1 db MHz
Surface Mount RF Transformer 50Ω 3 to 300 MHz Maximum Ratings Operating Temperature -20 C to 85 C Storage Temperature -55 C to 100 C RF Power 0.25W DC Current Pin Connections 30mA Permanent damage may
Vectron International Filter specification TFS180L 1/5
Vectron International Filter specification TFS180L 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 205.51 Ω -23.24 pf Output: 141.63 Ω - 31.49
VI TELEFILTER Filter specification TFS 70Z 1/5
VI TELEFILTER Filter specification TFS 70Z /5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 850 Ω -4,5 pf Output: 490 Ω -4, pf Characteristics
Vectron International Filter specification TFS140AV 1/5
Vectron International Filter specification TFS140AV 1/5 Measurement condition Ambient temperature T A: 23 C Input power level: 0 dbm Terminating impedance: * Input: 50 Ω -78 pf Output: 95 Ω -52 pf Characteristics
MPI40-V2 High current, low profile, miniature power inductors
Applications Handheld/mobile devices Portable media players Notebook/netbook/laptop regulators Tablets/smartbooks Battery operated devices LED drivers LCD displays Point-of-load (POL) converters Product
Vectron International Filter specification TFS 1632A 1/5
Vectron International Filter specification TFS 1632A 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 183 Ω -0,42 pf Output: 45 Ω -0,47 pf Characteristics
MA4P T. Quad PIN Diode π Attenuator MHz. M/A-COM Products Rev. V2. Features. Functional Schematic. Description.
1-4 MHz Features 4 PIN diodes in a SOT-2 Plastic Package Externally Selectable Bias and RF Matching Network 1 4, MHz Useable Frequency Band + 43 IP3 @ ( Ω) 1. db Loss @ ( Ω) 3 db Attenuation @ ( Ω) Lead-Free
discontinued October 31, 2017 or until inventory is
Technical Data DS4314 Supersedes June 2017 ECONO-PAC /OCTA-PAC OCTA-PAC PLUS Applications Computer and portable power devices LCD panels, DVD players Inductor: DC-DC converters Buck, boost, forward, and
Features. Symbol Parameters Test Conditions Min Max Unit V T. TA=25 C Pulse Wave = 10μs, Sine Wave, f=120hz K2201GL 230 V BO K2401GL K2401GL
Standard Bidirectional SIDACs Kxxx1GL Series RoHS Description Schematic Symbol The Multipulse SIDAC is a voltage switch used in Metal- Halide lamp ignition circuits, as well as High Pressure Sodium lamp
Vectron International Filter specification TFS 867A 1/5
Vectron International Filter specification TFS 867A 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:
PLEDxN Series. PLED Open LED Protectors PLEDxN Series. RoHS. Description
RoHS Description The open LED protector provides a switching electronic shunt path when a single LED in an LED string fails as an open circuit. This ensures the entire LED string will continue to function
MLSR100 Series. High Efficiency, 1.0A Surface Mount, POL Switching Regulators. Key Features:
MLSR100 Series High Efficiency, 1.0A Surface Mount, POL Switching Regulators Electrical Specifications Specifi cations typical @ +25 C, nominal input voltage & rated output current, unless otherwise noted.
Model BD3238N5050AHF. Ultra Low Profile 0404 Balun
Model BD338N55AHF Ultra Low Profile 44 Balun 5Ω to 5Ω Balanced Description The BD338N55AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and
Top View (Near-side) Side View Bottom View (Far-side) .89±.08. 4x.280. Orientation Marker Orientation Marker.
Model B2F2AHF Ultra Low Profile 168 Balun Ω to 2Ω Balanced Description The B2F2AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential input locations on data conversion
Typical Performance Data
Ceramic Balun RF Transformer 50Ω 720 to 1600 MHz Maximum Ratings Operating Temperature -40 C to 85 C Storage Temperature -55 C to 100 C Input RF Power*** 3W **Derate linearly to 2.5W at 100 C Permanent
Vectron International Filter specification TFS /5
Vectron International Filter specification TFS 1226 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 338 Ω -1.6 pf Output: 338 Ω -1.6 pf Characteristics
FP1008R7 High frequency, high current power inductors
Technical Data 1629 Effective December 216 FP18R7 High frequency, high current power inductors Applications Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) and high power density VRMs
Vectron International Filter specification TFS 942G 1/5
Vectron International Filter specification TFS 942G 1/5 Measurement condition Ambient temperature: 23 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The
No need for gain flatness compensation over 8 GHz band to realize published gain flatness.
Surface Mount Monolithic Amplifier 50Ω DC to 8 GHz The Big Deal Low Gain Good Gain flatness, ±0.9 Broadband matched Micro-X, 0.085 diameter Product Overview (RoHS compliant) is wideband current driven
MPI25-V2 High current, low profile, miniature power inductors
Technical Data 649 Effective July 8 MPI-V High current, low profile, miniature power inductors Product features High current carrying capacity in a compact standard 8 ( metric) footprint Magnetically shielded,
Vectron International Filter specification TFS 1227A 1/5
Vectron International Filter specification TFS 1227A 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω 0 pf Output: 50 Ω 0 pf Characteristics
Vectron International Filter specification TFS1255A 1/5
Vectron International Filter specification TFS1255A 1/5 Measurement condition Ambient temperature T A: 23 C Input power level: m Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The
Features. Block Diagram
Features WATT SMT SINGLE SMT Technology 2:1 Input Range Efficiency up to 8 I/O Isolation 100 Short Circuit Protected MTBF > 1,000,000 Hours RoHS Compliant MSL2 (Moisture Sensitivity Level) per IPC/JEDEC
HCM1104 High current power inductors
Technical Data 4370 High current power inductors Supersedes September 2017 Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-Load modules Desktop and server VRMs and EVRDs Base
DR1030 Shielded power inductors
Supersedes March 2007 Applications LED/LCD backlighting High definition televisions (HDTV) Server and desktop power supplies Portable electronics Notebook and laptop regulators Graphics cards and battery
GENERAL PURPOSE TRANSFORMERS
Watt Pulse, Electrostatically Shielded, 00 mw Pulse, RF Pulse, and Control Transformers Wide range of inductors and turns ratios Suitable for a variety of applications High flux density capability Available
Inductors for Power Circuits
Inductors for Power Circuits Wound/STD magnetic shielded SPM series Type: SPM3012 (3.2x3.0 mm) SPM5030 (5.2x5.0 mm) SPM6530 (7.1x6.5 mm) Issue date: March 2012 Conformity to RoHS Directive: This means
Vectron International Filter specification TFS /5
Vectron International Filter specification TFS 2096 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 200 Ω -0.38 pf Output: 75 Ω Characteristics
Power Inductors, Shielded
The Shielded Power are low profile, surface-mount inductors. They are designed for power applications or high current applications. Key Features High reliability and easy surface mount assembly Low loss
PLED Unidirectional Series (PLEDxUx)
(PLEDxUx) PLED Open LED Protectors Agency Approvals Agency Agency File Number E133083 Description The (PLEDxUx Series) open LED protectors provide an electronic switching shunt path around a single LED
Monolithic Amplifier LEE2-6+ Surface Mount. DC to 7 GHz. The Big Deal
Surface Mount Monolithic Amplifier 50Ω DC to 7 GHz The Big Deal Low Noise figure, 2.3 db at 2 GHz Low Current, 16 ma Broadband matched CASE STYLE: MC1630-1 Product Overview (RoHS compliant) is wideband
Series AM1L-NZ 1 Watt DC-DC Converter
Click on Series name for product info on aimtec.com Series M1-NZ FETURES: Single, Dual, & Dual Separated Models SMD Package ow ripple and noise High efficiency up to 83% Operating temperature -40 o C to