AKP-AKU DIGITAL PANEL METER
|
|
|
- Poppy Glenn
- 6 years ago
- Views:
Transcription
1 DIGITAL PANEL METER AKP-AKU Isolated digital indicators AKP and AKU are designed to provide display and signals transmission solutions. Its unique programmation principle on front plate or by digital output is easy to use. Large available range functions provide solutions for complementary signals processing needs. AKP and AKU indicators are designed in a fitted 48 X 96 X 75 mm case with unplugged connections and use JMConcept universal supply. Use very efficient components in a wide temperature ensures a very high level of reliability and very low thermal drift. 54
2 DIGITAL PANEL METER RANGE To provide solutions for all problems, indicators AKP and AKU are declined in 2 ranges : AKP range Indicators with mv, V, ma, Potentiometer, and Pt100 input. AKU range Indicators with mv, V, ma, Potentiometer, Pt100 and Thermocouple input. AKP and AKU series put forward different outputs : 0, 1 or 2 isolated analogue outputs. 0, 2 or 4 relays output 1 C/O. To make easier their use, all AKP and AKU indicators have a RS485 MODBUS, JBUS, bidirectional digital link on screw terminal allowing programming and digital recovery of all measurements through : Free software SET LINE or CKJM enables a very simple product configuration with PC (freely downloadable on our website). UNI LINE communication interface (RS485 / TCP-IP modbus converter and RS232/RS485 converter). DIGITAL PANEL METERS FUNCTIONS Digital indicators AKP and AKU have the following functions : Display 7 red segments display (green as an option) between & Input scale factor Allows to provide a magnifying effect on input in manual or automatic calibration. Output scale factor Allows to provide a magnifying effect on outputs and on display. Min/max memory Minimum or maximum measured values memorisation. Safety sensor Shows sensor break on display, analog output, by entering drop out value, independent for every outputs and on relays. Simulation function Basic function on JM Concept devices. Allows action concerning output and display separately from input and without disconnecting input or ouptut. 100 points Linearization -- Linearization allows to create an output function by input signal segmentation. Square root Output is square root of input. Threhsold Simple mode or band-mode with positive or negative safety. Threshold, hysteresis and temporization adjustment (separately from rise or fall). Direct access to thresholds. Alarm memorizing and alarm deleting. Others functions Cut Off ; Resolution ; Comma ; Filtering ; Display light off. Digital output All indicators have a RS485 MODBUS, JBUS, bidirectional digital link on screw terminal allowing digital recovery of all measurements, but it s also possible to configurate and drive the indicator. CJC Cold Junction Compensation by RTD can automatically compensate terminals change of temperature. Ajustment Allows to modify manually CJC factory value. 55
3 TELIS AKP-AKU CARACTÉRISTIQUES DES SORTIES GENERAL TECHNICAL CHARACTERISTICS Sortie 1 courant 0/20mA 4/20mA - De 0 à 20mA Sortie 1 tension 0/10V +/-10V - De 0 à 10V Sortie 2 courant 0/20mA 4/20mA - De 0 à 20mA Sortie 2 tension 0/10V - De 0V à 10V Sortie numérique USB en Face Avant (via USB LINE) Current input impedance RS 485 Modbus 4,75 ΩJbus isolée de l entrée et de la sortie 1 Tension Sortie relais & thermocouple input impedance Relais - : 1 RT > 10 ; 2 MΩ RT ; 3RT ; 4T ; 1RT & 1T RTD input Current < 1mA Current output impedance < 950 Ω Voltage output impedance > 4,7 kω Power supply sensor U < 24V - I < 29mA Impédance d'entrée Precision class < 0.10% Entrée courant 4,75Ω Thermal drift < 50ppm Entrée tension <10V > 10M Response time < 250ms Entrée tension +/-10V 1 MΩ 1C/O - 2A/250Vac Entrée tension >10V 1 MΩ Entrée PT100 ; Ni100 Entrée PT1000 Entrée Ni1000 Résistance 2 fils R=200 Ω Résistance 2 fils R=1000 Ω ; R=5000 Ω Supply / input / outputs isolation Courant : 0,8mA 2500Vac - 1mn - 50Hz Impédance Analogue output de sortie / digital output isolation --- Without Sortie Standard 1 & auxiliary 2 courant source Sortie Auxiliary 1 & source 2 tension in option Capteur Consumption > 20Vdc/370Vdc 1000Ω & 80Vac / 256Vac > 20Vac/60Vac 4 kω < 4VA Alimentation Operating temperature capteur U -10 C > 24V / +60 C - I < 29mA Storage temperature -25 C / +80 C Sortie relais Protection index Front face IP65 Relais Relais 1RT ou 1T : 2A/250Vac Case Self extinguishable black polyamide ULV0 Option Tropicalisation TECHNICAL CHARACTERISTICS AUTRES CARACTÉRISTIQUES OTHER TECHNICAL CHARACTERISTICS CARACTÉRISTIQUES GÉNÉRALES Classe de précision < 0,10 Conversion d'entrée analogique/numérique 24 bits Conversion de sortie numérique/analogique 16 bits Temps de réponse > 250ms Dérive thermique > 50ppm Ondulation résiduelle sortie courant 20 ua Ondulation résiduelle sortie tension > 10mV AKP INDICATORS RANGE CHARACTERISTICS DIGITAL PANEL METERS WITHOUT relays AK3000P0 - AK3000P1 Isolement AK3000P0 - AK3000P1 input Standard scales : Alimentation / Sortie 1 Adjustable scales : From 2mA 3 to mA Vac - 50 Hz - 1mm Alimentation Voltage (dc) / Sortie Vac - 50 Hz - 1mm Standard scales : 0/100mV ; 0/1V ; 0/5V ; 1/5V ; 0/10V ; 2/10V ; +/-10V ; 0/50V ; 0/100V ; 0/200V Entrée / Sortie Vac - 50 Hz - 1mm Entrée / Sortie 2 Adjustable scales : From 20mV to 110mV ; From 20V to 200V Vac - 50 Hz - 1mm Sortie Potentiometer 1 / Sortie 2 Potentiometer from 100Ω to 100KΩ Vac other - 50 value Hz - on 1mm demand Sortie RTD 1 / Sortie numérique PT100 2 or 3 wires - other on demand Vac - 50 Hz - 1mm Alimentation Current (dc) / Entrée 0/20mA ; 4/20mA Vac - 50 Hz - 1mm Sortie Sensor 2 power / Sortie supply numérique Sensor 2 or 3 wires Sensor power sans isolement supply : 24V, 29mA max Source AK3000P0 auxiliaire outputs Alimentation Current output universelle no current output 20VDc/370Vdc & 80Vac/256Vac Option Voltage output no tension output 20Vac/60Vac Consommation Digital output RS 485 isolated from output - Modbus, Jbus Digital output enables AKP programmation and Consommation maximale allows recovering every measurement. < 4VA Température AK3000P1 outputs scales : Température de stockage -25 C / +80 C Température Current output de fonctionnement Standard 0/20mA ; 4/20mA -10 C / +60 C Protection Voltage output Indice de protection Standard scales : 0/10V ; 0/5V ; 1/5V ; 2/10V Adjustable scales : From 0 to 10V IP20 Digital output RS 485 isolated from output - Modbus, Jbus Digital output enables AKP programmation and Boîtier Boîtier allows recovering every measurement. Polyamide noir auto extinguible VO 56 1
4 DIGITAL PANEL METERS WITH relay AK3200P0 - AK3200P1 - ak3400p1 AK3200P0 - AK3200P1 - ak3400p1 input Current (dc) --- Standard scales : 0/20mA ; 4/20mA Adjustable scales : From 2mA to 20mA Voltage (dc) --- Standard scales : 0/100mV ; 0/1V ; 0/5V ; 1/5V ; 0/10V ; 2/10V ; +/-10V ; 0/50V ; 0/100V ; 0/200V Adjustable scales : From 20mV to 110mV ; From 20V to 200V Potentiometer --- Potentiometer value from100ω to 100KΩ - other value on demand RTD --- RTD 2 or 3 wires - other on demand Sensor power supply --- Sensor 2 or 3 wires Sensor power supply : 24V, 29mA max AK3200P0 outputs Current output --- no current output Voltage output --- no tension output Relays 1C/O - 2A /250Vac Digital output --- RS 485 isolated from input - Modbus, Jbus Digital output enables the AKP programmation. Digital output allows recovering every AKP measurement. AK3200P1 - ak3400p1 outputs Current output --- Standard scales : 0/20mA ; 4/20mA Adjustable scales : From 0mA to 20mA Voltage output --- Standard scales : 0/10V ; 0/5V ; 1/5V ; 2/10V Relays 1C/O (AK3200P1) and 4 relays 1C/O (AK3400P1) Digital output --- RS 485 isolated from input - Modbus, Jbus Digital output enables the AKP programmation. Digital output allows recovering every AKP measurement AKU INDICATORS RANGE CHARACTERISTICS DIGITAL PANEL METERS WITHOUT relay AK9000U1 AK9000U1 input Current (dc) --- Standard scales : 0/20mA ; 4/20mA Adjustable scales : From 2mA to 20mA Voltage (dc) --- Standard scales : 0/100mV ; 0/1V ; 0/5V ; 1/5V ; 0/10V ; 2/10V ; +/-10V ; 0/50V ; 0/100V ; 0/200V Adjustable scales : From 20mV to 110mV ; From 20V à 200V Potentiometer --- Potentiometer value from 100Ω à 100KΩ - other value on demand RTD --- PT100 2 or 3 wires - other on demand Thermocouple --- J ; K ; R ; S ; T ; E ; B ; N ; W3 ; NiMo - others thermocouples on demand Sensor power supply --- Sensor 2 or 3 wires - Sensor power supply : 24V, 29mA max AK9000U1 output Current (dc) --- Standard scales : 0/20mA ; 4/20mA Voltage (dc) --- Standard scales : 0/10V ; 0/5V ; 1/5V ; 2/10V Digital output --- RS 485 isolated from output - Modbus, Jbus Digital output enables AKU programmation and allows recovering every measurement. DIGITAL PANEL METERS WITH relay AK9200U1 - AK9200U1 - AK9400U2 AK 9200 U1 - AK 9400 U1 - AK 9400 U2 input Current (dc) --- Standard scales : 0/20mA ; 4/20mA / Adjustable scales : From 2mA to 20mA Voltage (dc) --- Standard scales : 0/100mV ; 0/1V ; 0/5V ; 1/5V ; 0/10V ; 2/10V ; +/-10V ; 0/50V ; 0/100V ; 0/200V Adjustable scales : From 20mV to 110mV ; From 20V to 200V Potentiometer --- Potentiometer from 100Ω à 100KΩ - other value on demand RTD --- PT100 2 or 3 wires - other on demand Thermocouple --- J ; K ; R ; S ; T ; E ; B ; N ; W3 ; NiMo - other on demand Sensor power supply --- Sensor 2 or 3 wires - Sensor power supply: 24V, 29mA max 57
5 AKP-AKU DIGITAL PANEL METERS WITH relay AK9200U1 - AK9200U1 - AK9400U2 AK9200U1 outputs Current output --- Standard scales : 0/20mA ; 4/20mA Voltage output --- Standard scales : 0/10V ; 0/5V ; 1/5V ; 2/10V Digital output Relays 1C/O - 2A /250Vac RS 485 isolated from input - Modbus, Jbus Digital output enables the AKU programmation. Digital output allows recovering every AKU measurement AK9400U1 outputs Current output --- Standard scales : 0/20mA ; 4/20mA Voltage output --- Standard scales : 0/10V ; 0/5V ; 1/5V ; 2/10V Relay 1C/O - 2A /250Vac Digital output --- RS 485 isolated from input - Modbus, Jbus Digital output enables the AKU programmation. Digital output allows recovering every AKU measurement AK9400U2 outputs Current output Standard scales : 0/20mA ; 4/20mA Current output Standard scales : 0/20mA ; 4/20mA Voltage output Standard scales : 0/10V ; 0/5V ; 1/5V ; 2/10V Voltage output Standard scales : 0/10V ; 0/5V ; 1/5V ; 2/10V Outputs isolation --- Output 2 is isolated from output Vac permanent Relays 1C/O - 2A /250Vac Digital output --- RS 485 isolated from input - Modbus, Jbus Digital output enables the AKU programmation. Digital output allows recovering every AKU measurement OPTIONS REFERENCES ORDER CODE ADDED TO DEVICE REFERENCE Passive output option 1 Passive Output (Output 1) 15V < U < 36V - 0/4/20mA AKPASS1-1 Varnish option Varnish AK without relay Varnish AK with relay Supply option 20Vac/60Vac Auxiliary supply 20Vac/60Vac TROPICALISATION AK TROPICALISATION AKRL DEVICE CODE AK3X09PX - AK9X09UX 58
6 CONFIGURATION - WIRING - DIMENSIONS S WIRING Current 2 wires sensor 3 wires sensor Voltage +/-10V High voltage POTENTIOMETER PT100 THERMOCOUPLE OUTPUTS WIRING OUTPUT 1 Current OUTPUT 1 Voltage DIGITAL OUTPUT 9 10 OUTPUT 2 Current / Voltage OUTPUT RELAY 1 OUTPUT RELAY 2 OUTPUT RELAY 3 OUTPUT RELAY POWER SUPPLY WIRING AUXILIARY SOURCE 1 2 WITHOUT POLARITY DIMENSIONS AND TERMINALS 59
ONEXIS AUTOMATIONS PVT LTD B-8, First Floor, Industrial Area, Sector - 64, NOIDA , U.P, India Ph:
X A L I S XALIS is a new digital indicator range with 2 colors numerical and alphanumerical display designed to provide display and signals transmission solutions. XALIS disign allows exceptional performances
DOCUMENTATION. The new XALIS 9000 integrates a 32 bits microprocessor offering some more of performance.
DOCUMENTATION The new integrates a 32 bits microprocessor offering some more of performance. XALIS is a new digital indicator range with 2 colors numerical and alphanumerical display designed to provide
T E L I S T E L I S reinvents conversion and transmission of measures
T E L I S 9000 T E L I S reinvents conversion and transmission of measures Its graphic screen display, and its joystick make user-frendly and easily programmable device. Its USB front face plug enables
DOCUMENTATION. Its affordable price allows you to meet your budget target.
DOCUMENTATION ULCOS is a real concentrate of technology, mixing performance and versatility. It is able to meet your high level expectation, for technical tender specifications. Its affordable price allows
Process displays For standard signals, temperature, resistance measurement
Features Inputs: Voltage ±10 V, ±200 V / Current ±20 ma / thermocouples J,K,T,N,Pt100,Pt1000 / resistance measurement / potentiometer Display range can be linearised Two limits output Min, Max functions
- SMART TUNE- PID CONTROL - UNIVERSAL, 3 WIRE- TC, RTD AND LINEAR INPUT - AUX- REMOTE SET POINT/ TRIM INPUT - 2x ISOLATED CONTROL AND RETRANSMISSION
ADVANCED - CONTROLLERS - SMART TUNE- PID CONTROL - UNIVERSAL, 3 WIRE- TC, RTD AND INPUT - AUX- REMOTE SET POINT/ TRIM INPUT - 2x ISOLATED CONTROL AND RETRANSMISSION (ma) OUTPUTS - 4x EVENT OR ALARM OUTPUTS
Analogue temperature controllers
Analogue temperature controllers CT8A Input by J-K thermo-couple or by thermo-resistance Pt 00 (-wire) regulation modes : ON/OFF or proportional derivative selected by wiring Relay output Specifications
R24 DISPLAY MODULE WITH ACTIVE OUTPUT AND RELAY
Čapkova 22 678 01 Blansko tel.: +420 516 416942, 419995 fax: +420 516 416963 R24 DISPLAY MODULE WITH ACTIVE OUTPUT AND RELAY Display module is designed for measuring the resistance, the signal from the
DSCL, DSCP, SCTP. Industrial Loop Isolators and Transmitters DSCL, DSCP, SCTP. Industrial Loop Isolators and Transmitters
Industrial Loop Isolators and Transmitters DSCL,, SCTP DSCL,, SCTP Industrial Loop Isolators and Transmitters Description Dataforth s DSCL,, and SCTP series of products is a complete family of loop and
SEM1600T RTD/TC/SLIDE WIRE SIGNAL CONDITIONER
RTD, THERMOCOUPLE, THERMISTOR (BMS SENSORS), SLIDE WIRE, mv AND RESISTANCE INPUTS ma, VOLTAGE OR BIPOLAR VOLTAGE OUTPUT SENSOR OFFSET (TEMPERATURE) 22 SEGMENT USER LINEARISATION (PROCESS) CONFIGURATION
Digital Panel Meters DC/AC Current and Voltage Indicator/Controller Type LDM40
Digital Panel Meters Current and Voltage Indicator/Controller Type LDM40 Multi-input instrument 4-DGT LED 0.1% RDG basic accuracy TRMS AC current and voltage measurements AC/DC current measurements: selectable
High Performance Process & Temperature Controllers
C22 C62 C82 C83 High Performance Process & Temperature Controllers C72 C42 R22 01. Multi Color LCD Display 02. High Accuracy 18 Bit A-D Input and 15 Bit D-A Output 03. 200 msec Sampling Rate 04. True Universal
Excellent low-cost Process & Temperature Controllers
C22 C62 C82 C83 Excellent low-cost Process & Temperature Controllers C72 C42 R22 01. High Quality LCD Display 02. High Accuracy 18 Bit A-D Input and 15 Bit D-A Output 03. The Fast Sampling Rate in 200
MODEL: M6SXU MODEL: M6SXU [1][2] [3][4]
![MODEL: M6SXU MODEL: M6SXU [1][2] [3][4]](/thumbs/80/80784777.jpg "MODEL: M6SXU MODEL: M6SXU [1][2] [3][4]")
Tension-Clamp Ultra-Slim Signal Conditioners M6S Series UNIVERSAL TRANSMITTER (PC programmable) Functions & Features Maintenance-free tension clamp connection Universal input (mv, V, ma, T/C, RTD and potentiometer)
Digital Meters With A Multicolour Bargraph LEL-NA3 one-channel LEL-NA5 one-channel LEL-NA6 two-channel
Digital Meters With A Multicolour Bargraph LEL-NA3 one-channel LEL-NA5 one-channel LEL-NA6 two-channel Digital-analogue meters of LEL-NA series with a multicolour bargraph have a universal input destined
MODEL: M2XU MODEL: M2XU [1][2] [3][4]
![MODEL: M2XU MODEL: M2XU [1][2] [3][4]](/thumbs/89/100578547.jpg "MODEL: M2XU MODEL: M2XU [1][2] [3][4]")
Super-mini Signal Conditioners Mini-M Series UNIVERSAL TRANSMITTER (PC programmable) Functions & Features Accepts direct inputs from various sensors and provides a standard process signal I/O types and
Sefram. Sefram SEFRAM A new family of thermal recorders 6 to 36 channels. Make sure to visit our Website
Make sure to visit our Website http://wwwseframfr Sefram Sefram SEFRAM A new family of thermal recorders 6 to 36 channels 6 to 36 analogue channels Measurement boards : - 6 isolated channels universal
K3P ENG.qxd 23/10/ Pagina 1
K3P ENG.qxd 23/10/2003 12.30 Pagina 1 - CLEAR PROGRAM STATUS DISPLAY - DIRECT PROGRAM PARAMETER ADJUSTMENT - 8 INDEPENDENT PROGRAMS - 10 SEGMENTS FOR EACH PROGRAM - "SET - POINT TRACKING " AND "GUARANTEED
Multifunction Intelligent 4-wire Isolated Signal Conditioner
Multifunction Intelligent 4-wire Isolated Signal Conditioner IPAQ-4L is a fully universal and intelligent 4- wire (mains powered) transmitter for temperature measurement and signal conditioning applications.
Assembly. Front view. Parametrization interface. Power Bus
Temperature Converter Features Assembly 1-channel signal conditioner 24 V DC supply Thermocouple, RTD, potentiometer or mv input Input for PTC thermistor Current and voltage output Line fault (LFD) and
CONTA-ELECTRONICS. Converter Units
CONTA-ELECTRONICS Whether for manufacturing, electrical machine and plant instrumentation, control engineering, power distribution, building automation, or process engineering it is always important to
C330 / C330X PC-Programmable Universal, 2-wire Transmitter
C330 / C330X PC-Programmable Universal, 2-wire Transmitter The IPAQ C330 transmitter is a universal, isolated, temperature transmitter with additional voltage and resistance input. Its robust design and
SEFRAM DAS Sefram. Sefram. A new family of paperless recorders 6 to 72 channels, to cover all your applications
Sefram SEFRAM Make sure to visit our Website http://wwwseframfr A new family of paperless recorders 6 to 72 channels, to cover all your applications 6 to 72 analogue channels Measurement boards : - 6 isolated
High-quality digital indicator for panel mounting Model DI35-M, with multi-function input Model DI35-D, with two inputs for standard signals
Accessories High-quality digital indicator for panel mounting Model DI35-M, with multi-function input Model DI35-D, with two inputs for standard signals WIKA data sheet AC 80.03 Applications Machine building
CALYS channels High accuracy calibrator
CALYS 150 2 channels High accuracy calibrator Simultaneous IN and OUT 2 measurement channels Protected for on-site use Easy-Connect system Data acquisition HART protocol transmitter automatic calibration
Temperature Controller
Temperature Controller 1/8 IN - 48 x 96mm Platinum Series X400 Line Cost Effective Solutions This 48x96mm size controller of the Platinum Series, provides a high degree of functionality and reliability
SHIMADEN DIGITAL INDICATORS
Shimaden, Temperature and Humidity Control Specialists C %RH Series SD16A & SHIMADEN DIGITAL INDICATORS approved,ul applied BASIC FEATURES compliance DIN Size 48 x 96 mm ±.3% High Accuracy Indication Large
MODEL: R30US4. Remote I/O R30 Series
Remote I/O R30 Series UNIVERSAL INPUT MODULE (4 points, isolated) Functions & Features 4 points universal input I/O module Isolation between the channels Input range of each channel is individually adjustable
minimal installation depth: 70 mm without plug-in terminal 30 additional adjustable setpoints (parameter driven)
Digital panel meter 5-digit M2 red display of -19999 99999 digits (optional green, orange, blue or tricolour display) minimal installation depth: 70 mm without plug-in terminal adjustment via factory default
CALYS 150. Advanced documenting multifunction calibrator thermometer
Advanced documenting multifunction calibrator thermometer , most advanced documenting multifunction instrument of the range, works not only as a simulator (IN / OUT) but also as a dual channel thermometer
USB-2404-UI Specifications
Specifications Document Revision 1.1, April, 2011 Copyright 2011, Measurement Computing Corporation All specifications are subject to change without notice. Typical for the range 0 to 60 C unless otherwise
- SMART TUNE - PID CONTROL - UNIVERSAL, 3 WIRE - TC, RTD AND LINEAR INPUT - 2 INDEPENDENT SET POINT RAMP UP/ DOWN PROFILES - SERVO VALVE POSITIONER
MULTI - FUNTION ONTROLLERS - SMART TUNE - PID ONTROL - UNIVERSAL, 3 WIRE - T, RTD AND LINEAR INPUT - 2 INDEPENDENT SET POINT RAMP UP/ DOWN PROFILES - SERVO VALVE POSITIONER WITH POTENTIOMETER FEEDBAK -
Digital Indicator DS 96/48 PK
Data Sheet 10/33-2.1-EN Digital Indicator DS 9/48 P Digital Indicator DS 9/48 PK Inputs Direct current, direct voltage Thermocouple Resistance thermometer Programmable via front keys or PC software Limit
4-20mA, 0-10V and general process measuring bargraph displays
Page 1 of 6 Digital panel meters Large displays Bargraphs Transmitters 4-20mA, 0-10V process input bargraph displays Display almost any physical variable... The bargraph displays on this page accept most
installation depth: 90 mm without plug-in terminal 30 additional adjustable setpoints permanent MIN/MAX-value recording volume measuring (totaliser)
Digital panel meter 5-digit M3 red display from -19999 99999 Digits (optional green, orange or blue display) installation depth: 90 mm without plug-in terminal adjustment via factory default or directly
SEM210 SEM210X UNIVERSAL TEMPERATURE TRANSMITTER
UNIVERSAL INPUT, DUAL CHANNEL ATEX & IEC Ex Version MATHS FUNCTIONS SENSOR CHARACTERISTICS DOWNLOAD VIA USB PORT ALLOWS FOR CUSTOM TYPES FLASH TESTED TO 4 KV DC INTRODUCTION The SEM210 is a universal transmitter
MULTIFUNCTION GRAPHICAL UNIT MGU 800
MULTIFUNCTION GRAPHICAL UNIT MGU 800 For display, recording and evaluation of process instruments signals (level, temperature, pressure, etc.) 3.5" TFT display, multi-language menu Variety of possible
NEW! AOIP FD5 Advanced Digital Data Logger
NEW! AOIP FD5 Advanced Digital Data Logger Versatile data logger, each output channel can be custom configured for current, voltage, resistance, frequency, and temperature. The NEW! FD5 Digital Datalogger
DPA Series. Phone: Fax: Web: - Analogue signal conditioning
MANN SERIES Process alarms PA Series Two-channel modules for alarm monitoring Typical application of PAMA Modules in the PA Series are used for alarm monitoring. They can be configured for a wide variety
ANALOG INPUT/OUTPUT MODULES SPECIFICATIONS* Input resistance. From ± 10 mveff to ± 50 Veff (see ranges) AC input ZIN = 100 KΩ
ACM ANALOG INPUT/OUTPUT MODULES Analog Input/Output: - Modules - Voltage - Potentiometer - Current - RTDs and thermocouples - Strain gage - Accelerometer - ICP Freq => Voltage - RMS => DC - Etc. Plug and
SINEAX V 604s Programmable multifunctional transmitter
SINEAX V 60s f direct currents, direct voltages, temperature senss, teletransmitters potentiometers 00 SINEAX V60s is a multifunctional transmitter f top-hat rail assembly with the following main characteristics:
ONE CALIBRATOR ONLY MAIN FEATURES:
ONE CALIBRATOR ONLY The MEMOCAL 2000 is a lightweight versatile, portable, hand-held calibrator developed to solve two different and coexisting customer needs: field calibration (maintenance) and laboratory
PECA 30E. Analyseur de signaux alternatifs Signal Analyser for Electrical Networks
Analyseur de signaux alternatifs Signal Analyser for Electrical Networks Tout type de réseau : monophasé, triphasé équilibré avec ou sans neutre All types of network: single phase, 3-phase balanced, unbalanced,
CALYS 50. Field multifunction calibrator for basic use
Field multifunction calibrator for basic use CALYS 50 field multifunction calibrator is the perfect tool for advanced process maintenance and use on test bench in all industries. Suitable for all field
P5201 Universal Programmable Transmitters with Galvanic Isolation
Transmitters - KB0288-2012/09 P5201 Universal Programmable Transmitters with Galvanic Isolation One type of transmitter for all regular resistance and thermocouple sensors. Linearized output signal 4 to
SPECIFICATIONS. Superluminous SunBright display Readable from 100 feet away
PD2-6000 Helios Process Meter 0-20 ma, 4-20 ma; ±10 VDC (0-5, 1-5, 0-10 V); Modbus PV (slave) Dual-scale for applications 32-point, square root, exponential, or round horizontal tank linearization Tare
CALYS 150. Advanced documenting multifunction calibrator thermometer
Advanced documenting multifunction calibrator thermometer, most advanced documenting multifunction instrument of the range, works not only as a simulator (IN / OUT) but also as a dual channel thermometer
Process controller Setpoint programmer 1/16 DIN - 48 x 48 mm gammadue series M5 line
BT. 2.9 M/E Process controller programmer /6 DIN - 48 x 48 mm gammadue series M line Advanced features, customizable and process adaptable High speed data aquisition and signal management. Efficent information
Modular Smart Interfaces
Modular Smart Interfaces Automotive Energy & Power Analysis Aerospace & Defense Transportation General Test & Measurement Modular Smart Interfaces MSI Series Modular Smart Interfaces (MSI) bring an expanded
USB-TEMP and TC Series USB-Based Temperature Measurement Devices
USB-Based Temperature Measurement Devices Features Temperature and voltage measurement USB devices Thermocouple, RTD, thermistor, or semiconductor sensor measurements Eight analog inputs Up to ±10 V inputs*
MEMOCAL 2000/2000S. Hand-held calibrator
MEMOCAL 2000/2000S Hand-held calibrator MEMOCAL 2000 Very low temperature drift (0.1µV/ C) Accuracy: 0.015% of span Power supply: standard AA size battery (Alkaline, NiCd or Ni-MH) Measurement & generation
CALYS Transportable documenting multifunction calibrator with high accuracy 0.01%
Transportable documenting multifunction calibrator with high accuracy 0.01% CALYS 1200 is the ideal solution to simultaneously simulate and measure with a high accuracy of 0.01%: voltage, current, resistance,
Isolated DIN Rail Mount Loop-Powered 2-Wire Signal Conditioners. DRLP Series
Isolated DIN Rail Mount Loop-Powered 2-Wire Signal Conditioners DRLP Series U ±0.03% Accuracy (Typical) U ±0.01% Linearity U 1500Vrms Transformer Isolation and 240Vrms Field-Side Protection U Wide Loop
Isolation (ISO), Special Overvoltage functions protection (OP) Voltage measurement PAD-V8-P 8 Voltage, up to ±50 V BW: 6 Hz ISO: 350 V DC
Selection Guide PAD Series Modules Multi channel Low bandwidth - for static signals Isolation Digital output (RS-485) Exchangeable For DEWETRON systems with built-in DAQ rack Module # CH Input type Ranges
DIGITAL PANEL INSTRUMENTS
M2-1V.../ M2-1T... M2-1V.../ M2-1T... Case 96 x 48 mm Programmable Digital Panel 96 x 48 mm Red display of -1999 up to 99999 (optional green, orange, blue or tricolour display) Minimal installation depth:
Ouput Loop Powered Products Section C
Ouput Loop Powered Products Section C An output loop powered (or signal powered) isolator derives its power from the voltage drop across the device's current loop output. Because they require no separate
minimal installation depth: 57 mm without plug-in terminal min-/max-value recording display flashing at threshold exceedance / undershooting
Digital panel meter 4-digit M1 red display of -1999 9999 digits (optional green, orange or blue display) minimal installation depth: 57 mm without plug-in terminal adjustment via factory default or directly
Temperature Transmitters - Head Mounted
XTH Features - Non-programmable Models Sensor Types: Models for thermocouple Types J, K, or T Models for RTD Type Pt100 3-wire Select from a variety of pre-configured measuring ranges Internal cold junction
CALYS 100. Field precision documenting multifunction calibrator
Field precision documenting multifunction calibrator is a precision documenting multifunction calibrator within CALYS range. It is the perfect tool for advanced process maintenance and use on test bench
High-precision process calibrator Model CED7000
Calibration technology High-precision process calibrator Model CED7000 WIKA data sheet CT 85.51 Applications Research and development laboratories Calibration service companies and service industry Industry
Q.raxx A slimline RS / EC Universal Measurement System
Q.raxx A107-16 slimline RS / EC Universal Measurement System The Q.raxx slimline product is based on the standardised 19 technology, one rack unit (1 U) and is designed for measurements with a high level
Additel 875 Series Dry Well Calibrators
Additel 875 Series Dry Well Calibrators Three models ranging from -40 to 660 Portable, rugged, and quick to temperature Metrology-level performance in stability, uniformity, accuracy and loading effect
CALYS 75. Field documenting multifunction calibrator
Field documenting multifunction calibrator is a field documenting multifunction calibrator within CALYS range. It is the perfect tool for advanced process maintenance and use on test bench in all industries.
Temperature Transmitters - DIN Rail Mounted
XTD Features - Non-programmable Models Sensor Types: Models for thermocouple Types J, K, or T Models for RTD Type Pt100 3-wire Select from a variety of pre-configured measuring ranges Internal cold junction
Measurement and control. Digital instruments and measuring transducers
Measurement and control Digital instruments and measuring transducers M.2 - Digital instruments and measuring transducers Introduction...M2-3 Product selection table...m2-5 DC Series Digital indicator
Q.raxx A slimline RS / EC
The Q.raxx slimline product is based on the standardized 19 technology, one rack unit (1 U) and is designed for measurements with a high level of flexibility, reliability and accuracy in the field of stationary
Temperature Transmitter ZTT series
BT.11.13 ZT/I ZTT series The ZTT series transmitter accepts the most commonly used temperature sensors (RTD, T/C) as well as mv and slide wire signals. All the models adopt a 2 wire 4...20mA output signal
installation depth: 90 mm without plug-in terminal display flashing at threshold exceedance / threshold undershooting
Digital panel meter 5-digit M3 red display from -19999 99999 Digits (optional green, orange or blue display) installation depth: 90 mm without plug-in terminal min-/max-memory 30 additional adjustable
TxBlock-USB Transmitter
Transmitter TEMPERATURE TRANSMITTER - OPERATING MANUAL V1.0x I INTRODUCTION The TxBlock-USB is a 4-20 ma 2-wire temperature transmitter for head mount, powered by the current loop. The output current is
Conductivity Transmitter N-LF V AC
OPERATING INSTRUCTIONS Conductivity Transmitter N-LF2000 230V AC These operating instructions apply to the following device: Article Measuring range Order number N-LF2000, Conductivity measuring device
BU: EPBP GPG: DIN Rail Products Devices for the permanent control of insulation on supply lines for medical locations ISOLTESTER-DIG-RZ/RS/PLUS
INSTRUCTION MANUAL BU: EPBP GPG: DIN Rail Products Devices for the permanent control of insulation on supply lines for medical locations ISOLTESTER-DIG-RZ/RS/PLUS 1/23 More information than that reported
MCR-T-UI(/NC) MCR-T-UI-E(/NC)
MCR-T-UI(/) MCR-T-UI-E(/) Programmable Temperature Transducers for Resistance Thermometers and Thermocouples INTERFACE ata Sheet 00_0_en PHOENIX CONTACT - 0/00 escription A universal temperature measuring
minimal installation depth: 25 mm without plug-in terminal min-/max-value recording display flashing at threshold exceedance / undershooting
Digital panel meter 4-digit M1 red display of -1999 9999 digits (optional green, orange or blue display) minimal installation depth: 25 mm without plug-in terminal adjustment via factory default or directly
Economical Digital Indicators For Process and Electrical Measurement
Economical Digital Indicators For Process and Electrical Measurement DP18 Series Panel Punches Available DP18-P5, 4 to 20 ma input. DP18-EC, thermocouple input visit omega.com/thermocouple for thermocouples.
CALYS 150. Advanced documenting multifunction calibrator thermometer
Advanced documenting multifunction calibrator thermometer , most advanced documenting multifunction instrument of the range, works not only as a simulator (IN / OUT) but also as a dual channel thermometer
Q.raxx A101-8 slimline RS / EC
The Q.raxx slimline product is based on the standardized 19 technology, one rack mount unit (1 U) and is designed for measurements with a high level of flexibility, reliability and accuracy in the field
Isolated, Linearized Thermocouple Input 7B47 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM
Isolated, Linearized Thermocouple Input 7B47 FEATURES Interfaces, amplifies and filters input voltages from a J, K, T, E, R, S, B or N-type thermocouple. Module provides a precision output of either +1
B850 Boiler House Energy Monitor
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
DE MEDIDA PROGRAMABLES - CLASE 0,2 MEASURING PARAMETER. Apparent power, per phase and total
PROGRAMMABLE TRANSDUCER CP00_ - CP300_ - CP00_ VERTIDORES PROGRAMABLES - CLASE 0, ONVERTIDORES PROGRAMABLES CLASE 0, - Measuring transducer controlled by a- 16-bit microprocessor. - Settable through software.
Isolated, Thermocouple Input 7B37 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM
Isolated, Thermocouple Input 7B37 FEATURES Interfaces, amplifies, and filters input voltages from a J, K, T, E, R, S, or B-type thermocouple. Module provides a precision output of either +1 V to +5 V or
600T Series Transmitters. Specification Sheet. Model 653T Electronic temperature transmitter (PC programmable)
Specification Sheet 600T Series Transmitters Model 65T Electronic temperature transmitter (PC programmable) High flexibility and wide rangeability Single transmitter accepts RTD/THC/mV/ohm Galvanically
Process controller with Modbus Master/Slave & PROFIBUS DP 1/8 DIN - 48 x 96 mm Platinum Series X5000 Line
Process controller with Modbus Master/Slave & PROFIBUS DP /8 DIN - 8 x 96 mm Platinum Series X000 Line Sophisticated multifunction process controller with high level communications By its three different
Measurement and Instrumentation
POWER QUALITY ENERGY PERFORMANCE Measurement and Instrumentation Overview of ranges Selection guide Info & advice Economical range for industrial use μdigi1 - μdigi2 ranges Programmable range for universal
INSTALLATION MANUAL. SENECA s.r.l. Via Germania, Z.I. CAMIN PADOVA ITALY Tel Fax
Z-PC Line INSTALLATION MANUAL Z-DAQ-PID Analog, universal IN/OUT conversion and PID regulation with ModBUS RTU protocol based on RS485 serial interface Chapter index Page 1. Identification data 1 2. Preliminary
Energy Management Modular Smart Power Transducer Type SPT-90
Energy Management Modular Smart Power Transducer Type SPT-90 Class 0.5 (current/voltage) 16-bit µp-based modular smart power transducer Measurements of: W, Wavg, VA, VAr, PF, Wh, VAh, VArh, Amax (among
Measuring transducers
Measuring transducers MT4xx and (U)MT5xx Measuring transducer MT440 MT 440 Programmable multifunctional transducer Real time measurements of more than 50 quantities Power accuracy class 0.5 16 adjustable
269 Troubleshooting Guide 11/4/98 1
269 Troubleshooting Guide 11/4/98 1 Table of Contents Phase currents 3 Communications. 6 RTDs.. 9 Ground Fault Currents... 13 Output Relays. 15 Analog Output 17 Switch Inputs...18 11/4/98 2 Phase Currents
Universal Intelligent 2-wire DIN Rail Transmitters
Universal Intelligent 2-wire DIN Rail Transmitters IPAQ-L is a universal and intelligent 2-wire DIN rail transmitter for temperature and other measurement applications. IPAQ-LX is the Intrinsic Safe version
SHIMADEN DIGITAL INDICATOR
Shimaden, Temperature and Humidity Control Specialists C %RH Series SD24 & KR16A SHIMADEN DIGITAL INDICATOR BASIC FEATURES ohigh Accuracy ±0.1% FS+1 digit o1/1000ºc Resolution Indication Possible (Pt input
Digital indicator for panel mounting With multi-function input Model DI25
Accessories Digital indicator for panel mounting With multi-function input Model DI25 WIKA data sheet AC 80.02 Applications Plant construction Machine tools Plastics technology and processing Ventilation
On-site multifunction calibrator
CALYS 50 On-site multifunction calibrator Simultaneous Measurement and Generation Protected for on-site use Easy connection system Designed with a close collaboration with industrials, Calys 50 integrates
Bulletin 931 Signal Conditioners Technical Data
Technical Data Table of Contents/Product Line Overview Introduction to..................................4 Catalog Number Explanation.......................................6 Product Overview................................................7
DIGEM f 96 x 48 EK. Applications. Description
3-349-002-03 1/7.98 Front panel dimensions: 96 x 48 mm LED display: red or green, 14 mm high Max. display range: 19 999 to + 32 765 Modular connectors for flexible use Simple adjustments at front panel
Transducing electrical quantities Iskra MIS d.d. Measuring Transducers. Features
Measuring Transducers Transducing electrical quantities Iskra MIS d.d. Measuring Transducers Features AC, DC POWER SYSTEM MEASUREMENT MICROPROCESSOR CONTROL HOUSING FOR DIN RAIL MOUNTING IN COMPLIANCE
SHIMADEN DIGITAL INDICATORS
Shimaden, Temperature and Humidity Control Specialists C %RH Series SD16 & SHIMADEN DIGITAL INDICATORS & NRTL /C approved BASIC FEATURES DIN Size 48 x 96 mm ±.3% High Accuracy Indication Large 2 mm bright
MODEL: W2TS. Mini-MW Series
Space-saving Dual Output Signal Conditioners Mini-MW Series THERMOCOUPLE TRANSMITTER Functions & Features Accepts direct input from a thermocouple and provides a standard process signal 5-segment linearization
FC-33, DC SELECTABLE SIGNAL CONDITIONER
FC-33, DC SELECTABLE SIGNAL CONDITIONER Description. The FC-33 is a DIN rail or side mount, selectable input/output signal conditioner with 1500VDC isolation between input and output, and 1500VDC isolation
7051Plus / 5051Plus. Extended Specification
7051Plus / 5051Plus Extended Specification V1.1 Time Electronics, Botany Industrial Estate,Tonbridge, Kent, TN9 1RH England Tel: 44 (0)1732 355993 Fax: 44 (0) 1732 770312. E-mail: mail@timeelectronics.co.uk
minimal installation depth: 97 mm without plug-in terminal min-/max-value recording display flashing at threshold undercut/ exceedance
Digital panel meter 4-digit M1 red display with -1999 9999 digits (optional green, orange or blue displays) minimal installation depth: 97 mm without plug-in terminal adjustment via factory default or
Universal Intelligent 2-wire DIN Rail Transmitters
Universal Intelligent 2-wire DIN Rail Transmitters IPAQ-L is a universal and intelligent 2-wire DIN rail transmitter for temperature and other measurement applications. IPAQ-LX is the Intrinsic Safe version