ONEXIS AUTOMATIONS PVT LTD B-8, First Floor, Industrial Area, Sector - 64, NOIDA , U.P, India Ph:
|
|
- John Pierce
- 6 years ago
- Views:
Transcription
1 X A L I S XALIS is a new digital indicator range with 2 colors numerical and alphanumerical display designed to provide display and signals transmission solutions. XALIS disign allows exceptional performances in a fitted 48 X 96 X 75 mm case with unplugged connections and USB plug on rear panel. ONEXIS AUTOMATIONS PVT LTD B-8, First Floor, Industrial Area, Sector - 64, NOIDA , U.P, India Ph: info@onexisindia.com
2 XA LI S : RANGE INPUTS OUTPUTS COMMUNICATION REFERENCES CURRENT VOLTAGE PT100/POTENTIOMETER THERMOCOUPLE SENSOR SUPPLY 1 Analogue Isolated 2 RELAYS 4 RELAYS Digital RS485 Back face USB X A LI S 9000U0 X A LI S 9000U1 X A LI S 9200U0 X A LI S 9200U1 X A LI S 9400U1 X A LI S 0030U1 PHYSICAL UNITS 2 COLORS DISPLAY 2 COLORS DIGITAL DISPLAY 5 DIGITS 18mm 2 COLORS ALPHANUMERIC DISPLAY 9 DIGITS 8mm MENU KEY SCROLLING KEYS ENTER KEY ALARM STATUS DISPLAY XA LI S FUNCTIONS DISPLAY DISPLAY COLOR COLOR DISPLAY CHANGE INPUT DISPLAY OUTPUTS DISPLAY PROGRAMMATION OFFSET TARE SIMULATION 2 colors numerical and alphanumerical display Color choice green or red separetely on digital or alphanumerical display. Automatic color change possibility in case of alarm The indicator enables to display, the inputs in physical or programmed value. The indicator enables to display outputs, in physical value or in percent, it also displays alarms status. Programmation with 4 keys on front face and with USB plug on rear panel with free software S E T L I N E. Input Offset setting on all input types. Tare setting on mv and ma input. Simulation function allows action concerning analogue output, relays and display separately from input and without disconnecting input or ouptut. XALI S 2
3 XA LI S FUNCTIONS OUTPUT LIMITS MEMORISATION ALARMS RESET ALARMS MEMORISATION USB COMMUNICATION UNIT CJC INPUT SCALE FACTOR OUTPUT SCALE FACTOR MIN /MAX MEMORY SENSOR SAFETY 100 POINTS LINEARIZATION SQUARE ROOT THRESHOLDS OTHER FUNCTIONS Allows outputs limitation values High and low limits. Allows last measurement memorisation in case of error Separately on each alarm. Separately on each alarm. USB on rear face enables easy PC programmation via S E T L I N E sofware freely downloadable on website All indicators have a RS485 MODBUS, bidirectional digital link allowing : -To recover of all measurements -To configurate and drive the indicator. 2 digits physical unit display following numerical display or unit display with several letters and/or numbers on alphanumercal line. Cold Junction Compensation with 16Bits digital sensor. Allows to provide a magnifying effect on input in manual or automatic calibration. Allows to provide a magnifying effect on output and on display. Minimum or maximum measured values memorisation Shows sensor break on display, on analog output (by entering drop out value), on relays and digital output. Linearization allows to create an output function by input signal segmentation. Output is the square root of the input. Simple mode or band-mode with positive or negative safety. Threshold, hysteresis and temporization adjustment (separetely from rise or fall). Direct access to thresholds. Alarm memorizing and alarm deleting. Cut Off ; Resolution ; Comma ; Filtering ; Display light off. XA LI S : TECHNICAL CHARACTERISTICS INPUT/OUTPUT CHARACTERISTICS INPUT IMPEDANCE Current input Voltage<10V; thermocouple input Voltage input -/+10V or >10V PT10; PT100; Ni100; Cu50; Cu53; Cu100 input Ni1000; PT1000 input 2 wires resistor R=200Ω; R=1kΩ input 2 wires resistor R=10kΩinput OUTPUT IMPEDANCE Current output Voltage output SENSOR Sensor power supply RELAY OUTPUTS Relay 5,6Ω > 10MΩ 1MΩ Current : 1mA Current : 0,25mA Current: 1mA Current : 0,2mA < 950Ω > 4,7kΩ U < 24V - I < 36mA Relay 1C/O: 2A/250Vac XALI S 3
4 XA LI S : TECHNICAL CHARACTERISTICS GENERAL CHARACTERISTICS Precision class Analogue input/digital conversion Digital output/analogue conversion Response time mv, ma, thermocouple, resistor Response time RTD, potetiometer Thermal drift Current output residual ripple Voltage output residual ripple Supply / Input Supply / Output Input / Analogue output Input / Digital output Analogue output / Digital output bits 16 bits < 100ms < 250ms < 25ppm < 20μA < 10mV 5000Vdc Vac, 50Hz, 1mn 5000Vdc Vac, 50Hz, 1mn 5000Vdc Vac, 50Hz, 1mn 3500Vdc Vac, 50Hz, 1mn 3500Vdc Vac, 50Hz, 1mn OTHER CHARACTERISTICS Standard auxiliary source Auxiliary source in option Consumption TEMPERATURE Operating temperature Storage temperature PROTECTION INDEX CASE 20Vdc/370Vdc & 80Vac / 256Vac 20Vac/60Vac < 4VA -10 C / +60 C -25 C / +80 C IP65 Black ABS self-extinguible UL V0 XA LI S : INPUT CHARACTERISTICS CURRENT (dc) Standard scales : 0/1mA ; 0/10mA ; 0/20mA ; 4/20mA ; +/-1mA ; +/- 10mA ; +/-20mA Adjustable scales : From -22mA To 22mA VOLTAGE (dc) Standard scales : 0/100mV ; 0/1V ; 0/5V ; 1/5V ; 0/10V 2/10V ;0/50V ; 0/100V ; 0/200V; +/-100mV ; +/-1V ; +/-5V ; +/-10V +/-50V ; +/-100V ; +/-200V Adjustable scales : From -110mV to 110mV From -2V à 11V From -200V to 220V RTD Thermocouple PotentiomEtEr PT10; PT100 ; PT1000 ; Ni100 ; Ni ou 3 fils, C50, Cu53, Cu100 J, K, T, B, R, S, E, NiMo, N, W3/C, W5/D, P De 470Ω à 100KΩ - other value on demand 2 WIRES RESISTOR 0/200Ω ; 0/1KΩ ; 0/10KΩ - other values on demand SENSOR POWER SUPPLY Capteur 2 ou 3 fils - Sensor power supply : 24V - 36mA max XALI S 4
5 XA LI S : DIGITAL LINK CHARACTERISTICS DIGITAL OUTPUT MAPPING - RS 485 isolated Modbus Digital output enables X A LI S programmation, and to recover every X ALI S measurement. - USB on rear face enable easy PC programmation via S E T L I N E sofware freely downloadable on website. Open the possibility to choose your own MODBUS parameter addresses. XA LI S : OUTPUT CHARACTERISTICS analogue output CURRENT VOLTAGE X A LI S 9000U1 - X A LI S 9200U1 - X A LI S 9400U1 - X A LI S 0030U1 Standard scales : 0/10Ma ; 0/20mA ; 4/20mA Adjustable scales : From 0 to 22mA Standard scales : 0/10V ; 0/5V ; 1/5V ; 2/10V Adjustable scales : From 0 to 10V 2 RELAYS OUTPUTS X A LI S 9200U0 - X A LI S 9200U1 2 Relays 1RT - 2A /250Vac 4 RELAYS OUTPUTS X A LI S 9400U1 4 Relays 1RT - 2A /250Vac XA LI S : OPTIONS REFERENCES OPTIONS Varnish Auxiliairy supply 20Vac / 60Vac PRODUCT CODE X A LI S9x0xUx-T ou X A LI S003xU1-T X A LI S9x09Ux ou X A LI S0039U1 XA LI S : INPUT WIRINGS CURRENT INPUT SENSOR INPUT 2 WIRES SENSOR INPUT 3 WIRES VOLATGE INPUT /-10V INPUT HIGH VOLTAGE INPUT POTENTIOMETER THERMOCOUPLE PT, Ni, Cu INPUT XALI S 5
6 XA LI S OUTPUTS WIRINGS CURRENT OUTPUT VOLTAGE OUTPUT RELAY 1 RELAY 2 RELAY 3 RELAY XA LI S : OTHERS WIRINGS POWER SUPPLY AUXILIARY SOURCE 1 2 Without polarity DIGITAL OUTPUT RS485 MODBUS 9 10 A B XALI S : CUT OUT DIMENSIONS AND TERMINALS Deapth max with 95mm terminals. XALI S: FACTORY SET UP Input/ Output : 4/20mA Relays : 2 or 4C/O Display : 0/100 Alarm : High Communication speed : 9600bauds Threshold : 900 TB27 - Documentation non contractuelle. Contenus sujets à modifications sans préavis. Other adjustments on request XALI S 6
DOCUMENTATION. The new XALIS 9000 integrates a 32 bits microprocessor offering some more of performance.
DOCUMENTATION The new integrates a 32 bits microprocessor offering some more of performance. XALIS is a new digital indicator range with 2 colors numerical and alphanumerical display designed to provide
More informationT E L I S T E L I S reinvents conversion and transmission of measures
T E L I S 9000 T E L I S reinvents conversion and transmission of measures Its graphic screen display, and its joystick make user-frendly and easily programmable device. Its USB front face plug enables
More informationAKP-AKU DIGITAL PANEL METER
DIGITAL PANEL METER AKP-AKU Isolated digital indicators AKP and AKU are designed to provide display and signals transmission solutions. Its unique programmation principle on front plate or by digital output
More informationDOCUMENTATION. Its affordable price allows you to meet your budget target.
DOCUMENTATION ULCOS is a real concentrate of technology, mixing performance and versatility. It is able to meet your high level expectation, for technical tender specifications. Its affordable price allows
More informationProcess displays For standard signals, temperature, resistance measurement
Features Inputs: Voltage ±10 V, ±200 V / Current ±20 ma / thermocouples J,K,T,N,Pt100,Pt1000 / resistance measurement / potentiometer Display range can be linearised Two limits output Min, Max functions
More informationR24 DISPLAY MODULE WITH ACTIVE OUTPUT AND RELAY
Čapkova 22 678 01 Blansko tel.: +420 516 416942, 419995 fax: +420 516 416963 R24 DISPLAY MODULE WITH ACTIVE OUTPUT AND RELAY Display module is designed for measuring the resistance, the signal from the
More informationDSCL, DSCP, SCTP. Industrial Loop Isolators and Transmitters DSCL, DSCP, SCTP. Industrial Loop Isolators and Transmitters
Industrial Loop Isolators and Transmitters DSCL,, SCTP DSCL,, SCTP Industrial Loop Isolators and Transmitters Description Dataforth s DSCL,, and SCTP series of products is a complete family of loop and
More informationHigh-quality digital indicator for panel mounting Model DI35-M, with multi-function input Model DI35-D, with two inputs for standard signals
Accessories High-quality digital indicator for panel mounting Model DI35-M, with multi-function input Model DI35-D, with two inputs for standard signals WIKA data sheet AC 80.03 Applications Machine building
More information- SMART TUNE- PID CONTROL - UNIVERSAL, 3 WIRE- TC, RTD AND LINEAR INPUT - AUX- REMOTE SET POINT/ TRIM INPUT - 2x ISOLATED CONTROL AND RETRANSMISSION
ADVANCED - CONTROLLERS - SMART TUNE- PID CONTROL - UNIVERSAL, 3 WIRE- TC, RTD AND INPUT - AUX- REMOTE SET POINT/ TRIM INPUT - 2x ISOLATED CONTROL AND RETRANSMISSION (ma) OUTPUTS - 4x EVENT OR ALARM OUTPUTS
More informationC330 / C330X PC-Programmable Universal, 2-wire Transmitter
C330 / C330X PC-Programmable Universal, 2-wire Transmitter The IPAQ C330 transmitter is a universal, isolated, temperature transmitter with additional voltage and resistance input. Its robust design and
More informationMODEL: M2XU MODEL: M2XU [1][2] [3][4]
Super-mini Signal Conditioners Mini-M Series UNIVERSAL TRANSMITTER (PC programmable) Functions & Features Accepts direct inputs from various sensors and provides a standard process signal I/O types and
More informationNEW! AOIP FD5 Advanced Digital Data Logger
NEW! AOIP FD5 Advanced Digital Data Logger Versatile data logger, each output channel can be custom configured for current, voltage, resistance, frequency, and temperature. The NEW! FD5 Digital Datalogger
More informationDigital Indicator DS 96/48 PK
Data Sheet 10/33-2.1-EN Digital Indicator DS 9/48 P Digital Indicator DS 9/48 PK Inputs Direct current, direct voltage Thermocouple Resistance thermometer Programmable via front keys or PC software Limit
More informationCONTA-ELECTRONICS. Converter Units
CONTA-ELECTRONICS Whether for manufacturing, electrical machine and plant instrumentation, control engineering, power distribution, building automation, or process engineering it is always important to
More informationHigh Performance Process & Temperature Controllers
C22 C62 C82 C83 High Performance Process & Temperature Controllers C72 C42 R22 01. Multi Color LCD Display 02. High Accuracy 18 Bit A-D Input and 15 Bit D-A Output 03. 200 msec Sampling Rate 04. True Universal
More informationFC-33, DC SELECTABLE SIGNAL CONDITIONER
FC-33, DC SELECTABLE SIGNAL CONDITIONER Description. The FC-33 is a DIN rail or side mount, selectable input/output signal conditioner with 1500VDC isolation between input and output, and 1500VDC isolation
More informationDigital Meters With A Multicolour Bargraph LEL-NA3 one-channel LEL-NA5 one-channel LEL-NA6 two-channel
Digital Meters With A Multicolour Bargraph LEL-NA3 one-channel LEL-NA5 one-channel LEL-NA6 two-channel Digital-analogue meters of LEL-NA series with a multicolour bargraph have a universal input destined
More informationTemperature transmitter itemp PCP DIN rail TMT 121
Technical information TI 087R/09/en 510 03671 Temperature transmitter itemp PCP DIN rail TMT 121 Universal temperature transmitter for resistance thermometers (RTD), thermocouples, resistance and voltage
More informationSefram. Sefram SEFRAM A new family of thermal recorders 6 to 36 channels. Make sure to visit our Website
Make sure to visit our Website http://wwwseframfr Sefram Sefram SEFRAM A new family of thermal recorders 6 to 36 channels 6 to 36 analogue channels Measurement boards : - 6 isolated channels universal
More informationMultifunction Intelligent 4-wire Isolated Signal Conditioner
Multifunction Intelligent 4-wire Isolated Signal Conditioner IPAQ-4L is a fully universal and intelligent 4- wire (mains powered) transmitter for temperature measurement and signal conditioning applications.
More informationUSB-TEMP and TC Series USB-Based Temperature Measurement Devices
USB-Based Temperature Measurement Devices Features Temperature and voltage measurement USB devices Thermocouple, RTD, thermistor, or semiconductor sensor measurements Eight analog inputs Up to ±10 V inputs*
More informationTemperature Controller
Temperature Controller 1/8 IN - 48 x 96mm Platinum Series X400 Line Cost Effective Solutions This 48x96mm size controller of the Platinum Series, provides a high degree of functionality and reliability
More informationMODEL: M6SXU MODEL: M6SXU [1][2] [3][4]
Tension-Clamp Ultra-Slim Signal Conditioners M6S Series UNIVERSAL TRANSMITTER (PC programmable) Functions & Features Maintenance-free tension clamp connection Universal input (mv, V, ma, T/C, RTD and potentiometer)
More informationPROCESS & TEMPERATURE CONTROLLERS
PROCESS & TEMPERATURE CONTROLLERS NOVA PD54 Series Thermocouple, RTD, & Process Inputs High Accuracy Auto-Tuning PID Heating & Cooling Models Universal Power Supply 1-24 VAC Up to 3 Relays & 2 Analog Outputs
More informationAnalogue temperature controllers
Analogue temperature controllers CT8A Input by J-K thermo-couple or by thermo-resistance Pt 00 (-wire) regulation modes : ON/OFF or proportional derivative selected by wiring Relay output Specifications
More informationProcess controller Setpoint programmer 1/16 DIN - 48 x 48 mm gammadue series M5 line
BT. 2.9 M/E Process controller programmer /6 DIN - 48 x 48 mm gammadue series M line Advanced features, customizable and process adaptable High speed data aquisition and signal management. Efficent information
More informationHigh-precision process calibrator Model CED7000
Calibration technology High-precision process calibrator Model CED7000 WIKA data sheet CT 85.51 Applications Research and development laboratories Calibration service companies and service industry Industry
More informationSEFRAM DAS Sefram. Sefram. A new family of paperless recorders 6 to 72 channels, to cover all your applications
Sefram SEFRAM Make sure to visit our Website http://wwwseframfr A new family of paperless recorders 6 to 72 channels, to cover all your applications 6 to 72 analogue channels Measurement boards : - 6 isolated
More informationDPR100 C/D PEN AND MULTIPOINT 100 mm DIGITAL RECORDERS
PEN AND MULTIPOINT 100 mm DIGITAL RECORDERS EN0I-6021 06/2003 PRODUCT SPECIFICATION SHEET PRODUCT DESCRIPTION The DPR 100 C and D recorders are designed to meet the recording needs for most recording applications.
More informationAssembly. Front view. Parametrization interface. Power Bus
Temperature Converter Features Assembly 1-channel signal conditioner 24 V DC supply Thermocouple, RTD, potentiometer or mv input Input for PTC thermistor Current and voltage output Line fault (LFD) and
More informationCALYS Transportable documenting multifunction calibrator with high accuracy 0.01%
Transportable documenting multifunction calibrator with high accuracy 0.01% CALYS 1200 is the ideal solution to simultaneously simulate and measure with a high accuracy of 0.01%: voltage, current, resistance,
More informationAPPENDIX APPENDIX A 1
A 1 SPECIFICATIONS Ratings Supply voltage 100 to 240 VAC, 50/60 Hz 24 VAC, 50/60 Hz/24 VDC Operating voltage range 85 to 110% of rated supply voltage Power consumption 7VA 4VA/2.5W Sensor input Thermocouple
More informationS200 I/O System Units
S200 I/O System Units S200 I/O is a range of cost effective I/O units which are bus compatible with S200L I/O and can be mixed with them in any order on the same DIN rail. The S200 I/O System features
More informationTemperature Transmitters - Head Mounted
XTH Features - Non-programmable Models Sensor Types: Models for thermocouple Types J, K, or T Models for RTD Type Pt100 3-wire Select from a variety of pre-configured measuring ranges Internal cold junction
More informationDigital Panel Meters DC/AC Current and Voltage Indicator/Controller Type LDM40
Digital Panel Meters Current and Voltage Indicator/Controller Type LDM40 Multi-input instrument 4-DGT LED 0.1% RDG basic accuracy TRMS AC current and voltage measurements AC/DC current measurements: selectable
More informationSEM1600T RTD/TC/SLIDE WIRE SIGNAL CONDITIONER
RTD, THERMOCOUPLE, THERMISTOR (BMS SENSORS), SLIDE WIRE, mv AND RESISTANCE INPUTS ma, VOLTAGE OR BIPOLAR VOLTAGE OUTPUT SENSOR OFFSET (TEMPERATURE) 22 SEGMENT USER LINEARISATION (PROCESS) CONFIGURATION
More informationTxBlock-USB Transmitter
Transmitter TEMPERATURE TRANSMITTER - OPERATING MANUAL V1.0x I INTRODUCTION The TxBlock-USB is a 4-20 ma 2-wire temperature transmitter for head mount, powered by the current loop. The output current is
More informationSPECIFICATIONS. Superluminous SunBright display Readable from 100 feet away
PD2-6000 Helios Process Meter 0-20 ma, 4-20 ma; ±10 VDC (0-5, 1-5, 0-10 V); Modbus PV (slave) Dual-scale for applications 32-point, square root, exponential, or round horizontal tank linearization Tare
More informationhigh accuracy tester-calibrator PJ 6301
high accuracy testercalibrator PJ 6301 PJ6301 is a highaccuracy instrument: ± 0.005% with 600,000 measuring counts on voltage and current ranges; for thermocouple and for RTD measurement resolution. Simultaneous
More informationAI-501 INTELLIGENT INDICATING/ALARMING INSTRUMENT. Operation Instruction
AI-501 INTELLIGENT INDICATING/ALARMING INSTRUMENT Operation Instruction CONTENTS Page MAIN FEATURES... 2 ORDERING CODE.3 TECHNICAL SPECIFICATION.5 FRONT PANEL AND OPERATION..6 PARAMETER AND SETTING...
More informationExcellent low-cost Process & Temperature Controllers
C22 C62 C82 C83 Excellent low-cost Process & Temperature Controllers C72 C42 R22 01. High Quality LCD Display 02. High Accuracy 18 Bit A-D Input and 15 Bit D-A Output 03. The Fast Sampling Rate in 200
More informationUSER S MANUAL. Manual for Panel Mount Process Indicator. HTA INSTRUMENTATION (P) LTD. Your One Stop for Instrumentation, Calibration & Service
Member of SN Registrars (Holdings) Ltd 8327 USER S MANUAL Manual for Panel Mount Process Indicator EQ-DS8B-IRRB EQ-DS8B-IRRB HTA INSTRUMENTATION (P) LTD. Your One Stop for Instrumentation, Calibration
More informationP5201 Universal Programmable Transmitters with Galvanic Isolation
Transmitters - KB0288-2012/09 P5201 Universal Programmable Transmitters with Galvanic Isolation One type of transmitter for all regular resistance and thermocouple sensors. Linearized output signal 4 to
More informationDIGEM f 96 x 48 EK. Applications. Description
3-349-002-03 1/7.98 Front panel dimensions: 96 x 48 mm LED display: red or green, 14 mm high Max. display range: 19 999 to + 32 765 Modular connectors for flexible use Simple adjustments at front panel
More informationCALYS channels High accuracy calibrator
CALYS 150 2 channels High accuracy calibrator Simultaneous IN and OUT 2 measurement channels Protected for on-site use Easy-Connect system Data acquisition HART protocol transmitter automatic calibration
More informationDPA Series. Phone: Fax: Web: - Analogue signal conditioning
MANN SERIES Process alarms PA Series Two-channel modules for alarm monitoring Typical application of PAMA Modules in the PA Series are used for alarm monitoring. They can be configured for a wide variety
More informationMEMOCAL 2000/2000S. Hand-held calibrator
MEMOCAL 2000/2000S Hand-held calibrator MEMOCAL 2000 Very low temperature drift (0.1µV/ C) Accuracy: 0.015% of span Power supply: standard AA size battery (Alkaline, NiCd or Ni-MH) Measurement & generation
More informationK3P ENG.qxd 23/10/ Pagina 1
K3P ENG.qxd 23/10/2003 12.30 Pagina 1 - CLEAR PROGRAM STATUS DISPLAY - DIRECT PROGRAM PARAMETER ADJUSTMENT - 8 INDEPENDENT PROGRAMS - 10 SEGMENTS FOR EACH PROGRAM - "SET - POINT TRACKING " AND "GUARANTEED
More informationTemperature Transmitters - DIN Rail Mounted
XTD Features - Non-programmable Models Sensor Types: Models for thermocouple Types J, K, or T Models for RTD Type Pt100 3-wire Select from a variety of pre-configured measuring ranges Internal cold junction
More informationMODEL: R30US4. Remote I/O R30 Series
Remote I/O R30 Series UNIVERSAL INPUT MODULE (4 points, isolated) Functions & Features 4 points universal input I/O module Isolation between the channels Input range of each channel is individually adjustable
More informationCALYS 50. Field multifunction calibrator for basic use
Field multifunction calibrator for basic use CALYS 50 field multifunction calibrator is the perfect tool for advanced process maintenance and use on test bench in all industries. Suitable for all field
More informationAdditel 875 Series Dry Well Calibrators
Additel 875 Series Dry Well Calibrators Three models ranging from -40 to 660 Portable, rugged, and quick to temperature Metrology-level performance in stability, uniformity, accuracy and loading effect
More informationONE CALIBRATOR ONLY MAIN FEATURES:
ONE CALIBRATOR ONLY The MEMOCAL 2000 is a lightweight versatile, portable, hand-held calibrator developed to solve two different and coexisting customer needs: field calibration (maintenance) and laboratory
More informationUSB-2404-UI Specifications
Specifications Document Revision 1.1, April, 2011 Copyright 2011, Measurement Computing Corporation All specifications are subject to change without notice. Typical for the range 0 to 60 C unless otherwise
More informationIsolation (ISO), Special Overvoltage functions protection (OP) Voltage measurement PAD-V8-P 8 Voltage, up to ±50 V BW: 6 Hz ISO: 350 V DC
Selection Guide PAD Series Modules Multi channel Low bandwidth - for static signals Isolation Digital output (RS-485) Exchangeable For DEWETRON systems with built-in DAQ rack Module # CH Input type Ranges
More informationEconomical Digital Indicators For Process and Electrical Measurement
Economical Digital Indicators For Process and Electrical Measurement DP18 Series Panel Punches Available DP18-P5, 4 to 20 ma input. DP18-EC, thermocouple input visit omega.com/thermocouple for thermocouples.
More informationC520 / C520X /C520S / C520XS HART Compatible, Universal, Dual-input 2-wire Transmitters
C520 / C520X /C520S / C520XS HART Compatible, Universal, Dual-input 2-wire Transmitters The 520 transmitters are universal, isolated, dual-input temperature transmitters with additional voltage and resistance
More informationTemperature Transmitter ZTT series
BT.11.13 ZT/I ZTT series The ZTT series transmitter accepts the most commonly used temperature sensors (RTD, T/C) as well as mv and slide wire signals. All the models adopt a 2 wire 4...20mA output signal
More informationAI-700 / 500 INTELLIGENT INDICATING/ALARMING INSTRUMENT. Operation Instruction
AI-700 / 500 INTELLIGENT INDICATING/ALARMING INSTRUMENT Operation Instruction CONTENTS Page MAIN FEATURES... 2 ORDERING CODE.3 TECHNICAL SPECIFICATION.5 FRONT PANEL AND OPERATION..7 PARAMETER AND SETTING...
More information4-20mA, 0-10V and general process measuring bargraph displays
Page 1 of 6 Digital panel meters Large displays Bargraphs Transmitters 4-20mA, 0-10V process input bargraph displays Display almost any physical variable... The bargraph displays on this page accept most
More information2002 IS Catalog. Page
Page Introduction... 95 Current Repeaters/Drivers (Single-channel) KFD0-CS-Ex1.50P (Transmitter, positioner and indicator)... 96 KFD0-CS-Ex1.51P (Positioner and fire detector)... 97 KFD0-CS-Ex1.52 (Current
More informationDigital indicator for panel mounting With multi-function input Model DI25
Accessories Digital indicator for panel mounting With multi-function input Model DI25 WIKA data sheet AC 80.02 Applications Plant construction Machine tools Plastics technology and processing Ventilation
More informationD5072. SIL 2 Temperature Signal Converter, Multifunction, DIN-Rail and Termination Board, Models D5072S, D5072D. Characteristics: Technical Data:
Characteristics: Front Panel and Features: 5 6 3 1 SIL 11 1 Ordering Information: Model: 1 channel channels D50 D50 SIL according to IEC 6150 for Tproof 5 years ( % of total SIF). Input from Zone 0 (Zone
More informationitemp HART DIN rail TMT112
Temperature transmitter itemp HART DIN rail TMT112 Universal temperature transmitter for resistance thermometers (RTD), thermocouples, resistance and voltage transmitters, incorporating HART protocol Application
More informationCALYS 150. Advanced documenting multifunction calibrator thermometer
Advanced documenting multifunction calibrator thermometer , most advanced documenting multifunction instrument of the range, works not only as a simulator (IN / OUT) but also as a dual channel thermometer
More informationSEM210 SEM210X UNIVERSAL TEMPERATURE TRANSMITTER
UNIVERSAL INPUT, DUAL CHANNEL ATEX & IEC Ex Version MATHS FUNCTIONS SENSOR CHARACTERISTICS DOWNLOAD VIA USB PORT ALLOWS FOR CUSTOM TYPES FLASH TESTED TO 4 KV DC INTRODUCTION The SEM210 is a universal transmitter
More informationUniversal Intelligent 2-wire DIN Rail Transmitters
Universal Intelligent 2-wire DIN Rail Transmitters IPAQ-L is a universal and intelligent 2-wire DIN rail transmitter for temperature and other measurement applications. IPAQ-LX is the Intrinsic Safe version
More informationOn-site multifunction calibrator
CALYS 100 CALIBRATION On-site multifunction calibrator Simultaneous Measurement and Generation Rugged Construction for on-site use Easy connection system Measurement Data Recording Designed in close collaboration
More informationIsolated Linearized 4-Wire RTD Input 5B35 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM
Isolated Linearized 4-Wire RTD Input 5B35 FEATURES Single-channel signal conditioning module that Amplifies, Protects, Filters, and Isolates Analog Input. Isolates and protects a wide variety of four-wire
More informationOuput Loop Powered Products Section C
Ouput Loop Powered Products Section C An output loop powered (or signal powered) isolator derives its power from the voltage drop across the device's current loop output. Because they require no separate
More information600T Series Transmitters. Specification Sheet. Model 653T Electronic temperature transmitter (PC programmable)
Specification Sheet 600T Series Transmitters Model 65T Electronic temperature transmitter (PC programmable) High flexibility and wide rangeability Single transmitter accepts RTD/THC/mV/ohm Galvanically
More informationSEM210 SERIES. Programmable In-head Universal Temperature Transmitter INDEX SECTION CONTENTS PAGE NO.
INDEX SECTION CONTENTS PAGE NO. SEM210 SERIES 1.0 DESCRIPTION 1 2.0 SPECIFICATION 15 3.0 INSTALLATION 67 Programmable Inhead Universal Temperature Transmitter Status Instruments Ltd, Green Lane Business
More information7SD/7SH/7SM Temperature Controllers
7SD/7SH/7SM Temperature ADVANTAGE EZ Series 7SD, 7SH, 7SM 1/16 DIN Temperature 3Digit LED Display Thermocouple and RTD Input Autotuning NEMA 4X Field onfigurable 100 to 40 Vac Switching Power Supply Programmable
More informationSINEAX V 604s Programmable multifunctional transmitter
SINEAX V 60s f direct currents, direct voltages, temperature senss, teletransmitters potentiometers 00 SINEAX V60s is a multifunctional transmitter f top-hat rail assembly with the following main characteristics:
More informationMODEL: W2TS. Mini-MW Series
Space-saving Dual Output Signal Conditioners Mini-MW Series THERMOCOUPLE TRANSMITTER Functions & Features Accepts direct input from a thermocouple and provides a standard process signal 5-segment linearization
More informationSHIMADEN DIGITAL INDICATORS
Shimaden, Temperature and Humidity Control Specialists C %RH Series SD16A & SHIMADEN DIGITAL INDICATORS approved,ul applied BASIC FEATURES compliance DIN Size 48 x 96 mm ±.3% High Accuracy Indication Large
More informationDigital Controller Intelligent, User-friendly Digital Controller and Programmer Controlled with ease with a support software which is input via the communication jack on the front panel. Minute adjustment
More informationTemperature measurement TMD 832 head transmitter
Technical information TI 062R/09/en Mat.-Nr. 510 00782 Temperature measurement TMD 832 head transmitter SMART head transmitter with HART protocol for RTD, Thermocouple and mv input signals Applications
More informationMCR-T-UI(/NC) MCR-T-UI-E(/NC)
MCR-T-UI(/) MCR-T-UI-E(/) Programmable Temperature Transducers for Resistance Thermometers and Thermocouples INTERFACE ata Sheet 00_0_en PHOENIX CONTACT - 0/00 escription A universal temperature measuring
More informationUL CONDITIONS OF ACCEPTABILITY
Certificate Number: 1018011-1 Date: 2016-10-06 UL CONDITIONS OF ACCEPTABILITY Company Name: FUTURE DESIGN CONTROLS INC File-CCN: E197216 - QUYX2 Product Description: Process Control Equipment, Electrical
More informationDGS2 DGS3 DGS4. programmable / points format 24x48 mm. User handbook Valid for the instruments with version 02.xx
D I G I T A L P A N E L E T E R S programmable -2000 / +10 000 points format 24x48 mm SOCIÉTÉ FRANÇAISE D ÉTUDES ET DE RÉALISATIONS ÉLECTRONIQUES Tél. 04 78 16 04 04 - Fax 04 78 16 04 05 Tel. Intern. 33
More informationIsolated, Linearized Thermocouple Input 7B47 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM
Isolated, Linearized Thermocouple Input 7B47 FEATURES Interfaces, amplifies and filters input voltages from a J, K, T, E, R, S, B or N-type thermocouple. Module provides a precision output of either +1
More informationBulletin 931 Signal Conditioners Technical Data
Technical Data Table of Contents/Product Line Overview Introduction to..................................4 Catalog Number Explanation.......................................6 Product Overview................................................7
More informationCALYS 100. Field precision documenting multifunction calibrator
Field precision documenting multifunction calibrator is a precision documenting multifunction calibrator within CALYS range. It is the perfect tool for advanced process maintenance and use on test bench
More informationNEW NEW OMX 380. Programmable isolated transmitters Measuring rate - up to measur./s Teach-in Output: 4 20 ma/0 10 V Power supply VDC
54 OMX 380 Programmable isolated transmitters Measuring rate up to 7 500 measur./s Teachin Output: 4 20 ma/0 10 V Power supply 18 30 VDC xcitation Data output Power supply 10 30 VDC, isolated OMX 380PM
More informationTemperature head transmitter itemp PCP TMT 181
Technical information TI 070R/09/en Mat.-Nr.: 510 01110 Temperature head transmitter itemp PCP TMT 181 Universal head transmitter for resistance thermometers (RTD), thermocouples, resistance and voltage
More informationIsolated, Thermocouple Input 7B37 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM
Isolated, Thermocouple Input 7B37 FEATURES Interfaces, amplifies, and filters input voltages from a J, K, T, E, R, S, or B-type thermocouple. Module provides a precision output of either +1 V to +5 V or
More informationOn-site multifunction calibrator
CALYS 50 On-site multifunction calibrator Simultaneous Measurement and Generation Protected for on-site use Easy connection system Designed with a close collaboration with industrials, Calys 50 integrates
More informationCALYS 75. Field documenting multifunction calibrator
Field documenting multifunction calibrator is a field documenting multifunction calibrator within CALYS range. It is the perfect tool for advanced process maintenance and use on test bench in all industries.
More informationJUMO dtrans T02 Programmable 4-wire Transmitter (Smart Transmitter)
JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
More informationModular Smart Interfaces
Modular Smart Interfaces Automotive Energy & Power Analysis Aerospace & Defense Transportation General Test & Measurement Modular Smart Interfaces MSI Series Modular Smart Interfaces (MSI) bring an expanded
More informationADAM 4000/4100 Series
ADAM 4000/4100 Series Common Dimensions Communication RS-485 (2-wire) to host Speeds: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps (ADAM-4080, ADAM-4080D only support up to 38400 bps) Max. communication
More informationminimal installation depth: 70 mm without plug-in terminal 30 additional adjustable setpoints (parameter driven)
Digital panel meter 5-digit M2 red display of -19999 99999 digits (optional green, orange, blue or tricolour display) minimal installation depth: 70 mm without plug-in terminal adjustment via factory default
More informationUniversal Intelligent 2-wire DIN Rail Transmitters
Universal Intelligent 2-wire DIN Rail Transmitters IPAQ-L is a universal and intelligent 2-wire DIN rail transmitter for temperature and other measurement applications. IPAQ-LX is the Intrinsic Safe version
More informationSINEAX V604s Programmable multifunctional transmitter
SINAX V60s for direct currents, direct voltages, temperature sensors, teletransmitters or potentiometers SINAX V60s is a multifunctional transmitter for tophat rail assembly with the following main characteristics:
More informationMULTIFUNCTION GRAPHICAL UNIT MGU 800
MULTIFUNCTION GRAPHICAL UNIT MGU 800 For display, recording and evaluation of process instruments signals (level, temperature, pressure, etc.) 3.5" TFT display, multi-language menu Variety of possible
More informationB850 Boiler House Energy Monitor
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationIsolated, Linearized RTD Input 7B34 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM
Isolated, Linearized RTD Input 7B34 FEATURES Amplifies, Protects, Filters, and interfaces input voltages from a wide variety of two and three-wire platinum, copper and nickel Resistor Temperature Detectors
More informationQ.raxx A slimline RS / EC
The Q.raxx slimline product is based on the standardized 19 technology, one rack unit (1 U) and is designed for measurements with a high level of flexibility, reliability and accuracy in the field of stationary
More informationGeneral Specifications
General Specifications GS 05F01D01E MODEL UM351 Digital Indicator with Alarms with Active Color PV Display General Model UM351 Digital Indicator with Alarms is a precision alarm instrument provided with
More information